SAMSUNG LE40R73 User Manual [fr]

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

LCD TV

LE26R73BD LE26R74BD

LE32R73BD

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.

Country

BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL RUSSIA SLOVAKIA SPAIN SWEDEN U.K UKRAINE

Customer Care Center

02 201 2418 844 000 844 38 322 887 09 693 79 554

0 2 0    0

00 - 22  02

06 40 985 985 199 153 153 02 261 03 710

000 20 200   00

231 627 22 0 801 801 881 80 8 200 128 8-800-200-0400 0850 123 989 902 10 11 30 08 585 367 87 0870 242 0303 8-800-502-0000

www.samsung.com/be www.samsung.com/cz www.samsung.com/dk www.samsung.com/fi www.samsung.com/fr www.samsung.de www.samsung.com/hu www.samsung.com/it www.samsung.lu www.samsung.com/nl www.samsung.com/no www.samsung.com/pl www.samsung.com/pt www.samsung.ru www.samsung.com/sk www.samsung.com/es www.samsung.com/se www.samsung.com/uk www.samsung.com/ur

Web Site

LE32R74BD LE37R74BD

LE40R73BD LE40R74BD

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

BN68-01007C-00

ON-SCREEN MENUS

PC DISPLAY

PICTURE IN PICTURE (PIP)

TELETEXT

This device is a Class B digital apparatus.

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• D o not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as " screen burn" . To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• W atching the LCD TV in 4 : 3 format for a long period of time may leave traces of borders displayed on the

left, right and center of the screen caused by the difference of light emission on the screen. P laying a D VD or a game console may cause a similar effect to the screen. D amages caused by the above effect are not covered by the W arranty.

• D isplaying still images from Video games and P C for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘ contrast’ when displaying still images.

Précautions à prendre lors de l'affichage d'une image fixe

Une image fixe peut causer des dommages irrémédiables à l'écran du téléviseur.

• N ' affichez pas une image fixe sur l'écran LCD plus de 2 heures. Cela pourrait provoquer une rémanence de l' image à l'écran. Cette rémanence de l' image est également appelée " brû lure de l' écran" . P our éviter une telle rémanence de l' image à l'écran, réduisez la luminosité et le contraste de l' écran lorsque vous laissez une image fixe affichée.

• R egarder l' écran LCD du téléviseur en format 4 : 3 pendant une longue période peut laisser des traces de

bordures à gauche, à droite et au centre de l'écran, à cause de la différence d' émission de lumière sur l'écran. La lecture d' un D VD ou l' utilisation d' une console de jeu peut avoir un effet similaire sur l'écran. Les dommages provoqués par les effets qui précèdent ne sont pas couverts par la garantie.

• L'affichage d' images fixes de jeux vidéo et d'ordinateurs pendant plus longtemps qu'une période spécifique peut provoquer des rémanences. P our éviter cela, réduisez la " luminosité" et le " contraste" lors de l' affichage d'images fixes.

Contents

English

CONNECTING AND PREPARING Y OUR TV

List of Parts ............................................................................. 2

Installing the Stand ................................................................. 2

Installing the Wall Mount Kit .............................................. 2

Viewing the Control Panel ...................................................... 3

Viewing the Connection Panel ................................................ 4

Viewing the Remote Control ................................................... 6

Installing Batteries in the Remote Control .............................. 6

Switching On and Off .............................................................. 7

Placing Your Television in Standby Mode............................... 7

Plug & Play ............................................................................. 7

SETTING THE CHANNELS

Storing Channels Automatically .............................................. 8

Storing Channels Manually ..................................................... 8

Setting the Channel Manager ................................................. 9

Activating the Child Lock ................................................... 9

Sorting the Stored Channels .................................................. 10

Assigning Channels Names ................................................... 10

Fine Tuning Channel Reception ............................................. 10

LNA (Low Noise Amplifier) ...................................................... 11

SETTING THE PICTURE

Changing the Picture Standard .............................................. 11

Adjusting the Custom Picture ................................................. 11

Changing the Colour Tone ...................................................... 11

Resetting the Picture Settings to the

Factory Defaults...................................................................... 12

Changing the Picture Size ...................................................... 12

Freezing the Current Picture .................................................. 12

Digital Noise Reduction .......................................................... 12

DNIe Demo (Digital Natural Image engine) ............................ 13

Viewing the Picture In Picture (PIP) ....................................... 13

PIP Settings ............................................................................ 14

SETTING THE SOUND

Changing the Sound Standard .......................................... 14

Adjusting the Sound Settings ............................................ 14

Connecting Hheadphones ................................................. 14

Setting the TruSurround XT (SRS TSXT) ......................... 15

Adjusting the Volume Automatically .................................. 15

Selecting the Internal Mute ............................................... 15

Listening to the Sound of the Sub Picture ........................ 15

Resetting the Sound Settings to the Factory Defaults ...... 16

USING THE DTV FEATURE

Previewing the DTV Menu System ......................................... 19

Updating the Channel List Automatically ................................ 19

Updating the Channel List Manually ................................. 20

Editing Your Favourite Channels ............................................ 20

Selecting Channel Manager ................................................... 21

Displaying Programme Information ........................................ 22

Viewing the EPG (Electronic Programme Guide)

Information .............................................................................. 22

Using the Scheduled List ........................................................ 23

Setting the Default Guide ....................................................... 23

Viewing All Channels and Favourite Channels....................... 24

Choosing Your Language ....................................................... 24

Adjusting the Translucency Level ..................................... 25

Setting up the Parental Lock .................................................. 25

Setting the Subtitle ................................................................. 26

Selecting the Preferred Language

(Subtitle or Audio) ................................................................... 26

Viewing Product Information ................................................... 26

Checking the Signal Information ............................................ 26

Upgrading the Software (Option) ............................................ 27

Viewing Common Interface .................................................... 27

Selecting the CI (Common Interface) Menu ........................... 28

Resetting ................................................................................. 28

USING THE TELETEXT FEATURE

Teletext Decoder ............................................................... 28

Displaying the Teletext Information ................................... 29

Selecting a Specific Teletext Page .................................... 29

Using Fastext to Select a Teletext Page ........................... 30

SETTING THE PC

Setting up Your PC Software

(Based on Windows XP) ................................................... 30

Display Modes ................................................................... 30

Setting the PC ................................................................... 31

RECOMMENDATIONS FOR USE

Using the Anti-Theft Kensington Lock ............................... 32

Troubleshooting:

Before Contacting Service Personnel ............................... 32

Technical and Environmental Specifications .................... 33

SETTING THE TIME

Setting and Displaying the Current Time .......................... 16

Setting the Sleep Timer ..................................................... 16

Switching the Television

On and Off Automatically .................................................. 16

SETTING THE OTHERS

Choosing Your Language .................................................. 17

Using Game Mode ............................................................ 17

Setting the Blue Screen Mode /

Selecting the Melody ........................................................ 17

Using the Energy Saving Feature ..................................... 18

Selecting the Source ......................................................... 18

Editing the Input Source Names ....................................... 18

English-1

Symbol Press Important Note One-Touch

Button

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

M4 X L16

Remote Control &

Batteries (AAA x 2)

Owner’s Instructions



Warranty card / Service Network Card / Safety Guide / Registration Cards (Not available in all locations) The stand and stand screw may not be included depending on the model.

Power Cord Cover-Bottom Stand Screw X 4 Stand Cleaning Cloth

 Warranty card 

Service Network Card

 Safety Guide  Registration Cards

Installing the Stand

< 2 > < 3 >

1. Place the TV faced down on a soft cloth or cushion on a table.

2. Put the stand into the hole at the bottom of the TV.

3. Insert screw into the hole indicated and tighten.

The stand is installed for models with the screen size of 40 inch and above.

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Remove the stand and cover the bottom hole with a cap

and fasten with two screws.

English-2

Viewing the Control Panel

The product colour and shape may vary depending on the model.

SOURCE

Toggles between all the available input sources

(TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI, DTV). In the on-screen menu, use this button as you use the ENTER button on the remote control.

Press to see an on-screen menu of your TV’s features.

In case of DTV mode, the DTV menu appears.

Press to decrease or increase the volume.

In the on-screen menu, use the buttons as you use the  and  buttons on the remote control.

Press to change channels.

In the on-screen menu, use the use the  and  buttons on the remote control. (Without the Remote Control, you can turn on the TV by using the Channel buttons.)

Speakers Power Indicator

Blinks and turns off when the power is on and lights up in

stand-by mode.

Press to turn the TV on and off.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

(

Power)

buttons as you

English-3

Viewing the Connection Panel

[Rear Panel Jacks] (32 inch, 37 inch, 40 inch)

[Side Panel Jacks]

(26 inch model does not have the side panel jacks.)

Power Input

[Rear Panel Jacks] (26 inch)

Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.

Connecting an A erial or Cab le Telev ision N etw ork

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial / A cable television network / A satellite network

English-4

Connecting H DM I / DV I

Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs).

- No additional Audio connection is needed for an HDMI to HDMI connection. What is HDMI?

- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).

The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture.

“High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio (5. 1 channels).

You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the " R - AUDIO - L" terminal on DVI for sound output.

When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has been set to a compatible

Supported modes for DVI or HDMI

50 Hz 60 Hz Component

Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card. (This will result in a blank screen being displayed)

480i

X X O

480p

O O O

576i

X X O

576p

O X O

720p

O O O

1080i

O O O

Connecting S et- Top B ox , V CR or DV D

Connector

EXT 1 EXT 2

Connecting Ex ternal A / V Dev ices

- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

Connect RCA audio cables to " R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the A/V device.

- Headphone may be connected to the headphone output (

the built-in speakers will be disabled.

S ER V I CE

- Service connection for qualified service engineer.

Connecting A U DI O

- Connect RCA audio cables to " R - AUDIO - L" on the rear of your set and the other ends to corresponding audio in connectors on the

Amplifier or DVD Home Theater.

Connecting Computer

- Connect the D- Sub cable (optional) to " PC (PC IN)" on the rear of your set and the other end to the Video Card of your computer.

Connect the stereo audio cable (optional) to " AUDIO (PC IN)" on the rear of your set and the other end to " Audio Out" of the sound card on your computer.

Connecting Component Dev ices (DTV / DV D)

- Connect component video cables (optional) to component connector (" P

corresponding component video out connectors on the DTV or DVD.

- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the

DTV (or DVD) to component connector (" P

- The P

Connect RCA audio cables (optional) to " R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.

- This LCD TV displays its optimum picture resolution in 720p mode.

- This LCD TV displays its maximum picture resolution in 1080i mode.

K ensing ton L ock

- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

- If you want to use a locking device, contact the dealer where you purchased the TV.

The place of the Kensington Lock may be different depending on its model.

DI G I T A L A U DI O O U T (O PTI CA L )

- Connect to a Digital Audio Component.

Connecting CI (Common I nterface) CA R D

S erv ice Port

- Service connection for qualified service engineer.

Video Audio (L/R) RGB

R, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

TV Rear Panel

Input

R" , " PB" , " Y" ) on your set.

CI CARD

Output

Video + Audio (L/R)

Only TV or DTV output is available.

Output you can choose.

) on the rear of your set. While the headphone is connected, the sound from

Please insert the card as shown

English-5

Inputs or outputs for external devices, such as VCR, DVD,

video game device or video disc players.

R" , " PB" , " Y" ) on the rear of your set and the other ends to

- When not inserting " CI CARD" in some channels, " Scrambled Signal" is displayed on the screen.

- The pairing information containing a telephone number, CI CARD ID, Host ID, and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

- When the channel information configuration has finished, the message " Updating Completed" is displayed, indicating that the channel list is now updated.

You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.

Viewing the Remote Control

Selects a target device to be controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR)

Television Standby button Number buttons for direct

channel access One/Two-digit channel selection It display " Channel Manager"

on the screen.



Selects the TV and DTV mode directly VCR/DVD Functions

Rewind, Stop, Play/Pause, Fast/Forward

Volume increase

Volume decrease Temporary sound switch-off Menu display and

change confirmation Electronic Program Guide (EPG) display Picture-In-Picture On / Off Picture freeze Picture effect selection Sound effect selection Adjusts 5 separate devices - TV, DVD,

STB, CABLE, or VCR. Available source selection Previous channel DTV menu display

Automatic Power-off

: Next channel

: Previous channel

P Exit the OSD

Control the cursor in the menu Use to see information on the

current broadcast Picture size selection Digital subtitle display Sound mode selection SRS TSXT selection

Teletext Functions

Exit from the teletext display Teletext index Teletext hold Teletext size selection Teletext mode selection (LIST/FLOF) Teletext sub page P : Teletext next page

: Teletext previous page

P Teletext cancel Teletext reveal Alternately select Teletext, Double, or Mix. Fastext topic selection Teletext store

The performance of the remote control may be affected by bright light. This is a special remote control for the visually impaired, and has Braille points on the

Power, Channel and Volume buttons.

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batteries.

Make sure to match the " +" and " –" ends of the batteries with the diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

English-6

Switching On and Off

The mains lead is attached to the rear of y our set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2. Press the button on the front of the set. You also can press the POWER button or the

The programme that you were watching last is reselected automatically.

Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

TV/DTV

button on the remote control to turn the TV on.

4. To switch your set off, press the POWER button again.

Placing Y our Television in Standby Mode

Y our set can b e placed in standb y mode in order to reduce the pow er consumption. The standb y mode can b e useful w hen y ou w ish to interrupt v iew ing temporarily (during a meal, for ex ample).

1. Press the POWER

The screen is turned off and a red standby indicator appears on the front of your set.

To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or channel up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.

button on the remote control.

Plug & Play

When the TV is initially pow ered on, sev eral b asic setting s proceed automatically and sub sequently . The follow ing setting s are av ailab le.

1. Press the POWER The message " Démarrer Plug & Play" is displayed with " OK" selected.

2. Select the appropriate language by pressing the  or  button. Press the ENTER

3. The message " Check antenna input." is displayed with " OK" selected. Press the ENTER

Please check that the antenna cable is connected correctly.

4. Select the appropriate country by pressing the  or  button. Press the ENTER button to confirm your choice.

The " Auto Store" menu is displayed with the " Start" selected. Press the ENTER button.

The channel search will start and end automatically. After all the available channels are stored, the " Clock Set" menu appears. Press the ENTER

6. Press the ENTER button. Select the " Hour" or " Minute" by pressing the

Set the " Hour" or " Minute" by pressing the

You can also set the hour and minute by pressing the number buttons on the remote control.

7. Press the ENTER button to confirm your setting. The DTV channel scan menu appears and the DTV channel is automatically updated.

If the DTV channel is updated, the Source in the source list of the Input menu is

automatically changed to DTV.

For detailed descriptions about DTV channel update, refer to page 27 of this manual.

 Language: Select your language.  Country: Select your country.  Auto Store: Automatically scans for and stores channels available in the local area.  Clock Set: Sets the current time for the TV clock.

I f y ou w ant to reset this feature. . .

1. Press the MENU button to display the menu. Press the  or 

2. Press the ENTER button again, to select " Plug & Play" .

3. The message to

button on the remote control.

button to confirm your choice.

button.

button at any time to interrupt the memorization process.

 or 

button.

ENTER

button

to select " Setup" , then press the

" Start Plug & Play"

is displayed.

 or 

button.

English-7

- Storing Channels Automatically

- Storing Channels Manually

Storing Channels Automatically

Y ou can scan for the frequency rang es av ailab le to y ou (and av ailab ility depends on y our country ). A utomatically allocated prog ramme numb ers may not correspond to actual or desired prog ramme numb ers. H ow ev er, y ou can sort numb ers manually and clear any channels y ou do not w ish to w atch.

1. Press the MENU button to display the menu. Press the  or  button to select " Channel" , then press the ENTER

2. Press the ENTER

button to select " Country" .

3. Select the appropriate country by pressing the  or  button. Press the ENTER

4. Press the  or  button to select " Auto Store" , then press the ENTER

5. Press the ENTER

The TV will begin memorizing all of the available channels.

Press the ENTER button at any time to interrupt the memorization process and return to the " Channel" menu.

button.

button to confirm your choice.

button.

6. After all the available channels are stored, the " Sort" menu appears.

Storing Channels Manually

Y ou can store up to 1 0 0 channels, including those receiv ed v ia cab le netw ork s. When storing channels manually , y ou can choose: Whether or not to store each of the channels found. The prog ramme numb er of each stored channel w hich y ou w ish to identify .

1. Press the MENU button to display the menu. Press the  or  button to select " Channel" , then press the ENTER

2. Press the  or  button to select " Manual Store" , then press the ENTER

3. Press the ENTER

button to select " Programme" .

4. To assign a programme number to a channel, find the correct number by pressing the  or  button and then press the ENTER

You can also set a programme number by pressing number buttons on the remote control.

button.

5. Press the  or  button to select " Colour System" , then press the ENTER button.

6. Select the colour standard required by pressing the  or  button then, press the ENTER

7. Press the  or  button to select " Sound System" , then press the ENTER

8. Select the sound standard required by pressing the  or  button, then press the ENTER

If there is an abnormal sound or no sound, re-select the sound system required.

9. If you know the number of the channel to be stored, press the  or  button to select " Channel" . Press the ENTER button. Select C (Air channel) or S (Cable channel) by pressing the  or  button. Press the  button to select channel. Select the required number by pressing the  or  button and then press the ENTER button.

Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode) You can also set a channel number by pressing number buttons on the remote control.

10. If you do not know the channel numbers, press the  or  button to select " Search" .

Press the ENTER button. Search by pressing the  or  button and then press the ENTER button.

11. Press the  or  button to select " Store" . Press the ENTER

12. Repeat steps 3 to 11 for each channel to be stored.

button.

button to select " OK" .

button.

 Programme: Selects a program number for the channel.  Colour System: Sets the colour supporting system.  Sound System: Sets the sound supporting system.

 Channel: Selects a channel.  Search: Scans for the frequency value for the channel.  Store: Saves your settings.

English-8

Setting the Channel Manager

S et the channels according to y our preference. Y ou can easily delete, add, or lock the channel y ou w ant.

1. Press the MENU button to display the menu. Press the  or  button to select " Channel" , then press the ENTER

2. Press the  or  button to select " Channel Manager" , then press the ENTER

3. Press the ENTER

4. Press the  button to select "

5. Press the  or  button to select the undesired channel,

then press the ENTER

6. Repeat steps 5 for each channel to be selected or canceled

7. Press the EXIT button to exit.

You can select these options by simply

pressing the CH MGR button on the remote control.

button.

button again, to select " Channel Manager" .

" .

button to cancel.

is active when " Child Lock" is selected to " On" .

button.

Activating the Child Lock

This feature allow s y ou to prev ent unauthoriz ed users, such as children, from w atching unsuitab le prog rammes b y muting out v ideo and audio. Child L ock cannot b e released using the b uttons on the side. O nly the remote control can release the Child L ock setting , so k eep the remote control aw ay from children.

1. Press the MENU button to display the menu. Press the  or  button to select " Channel" , then press the ENTER

2. Press the  or  button to select " Channel Manager" , then press the ENTER

3. Press the  or  button to select " Child Lock" , then press the ENTER

4. Press the  or  button to select " On" or " Off" . Press the ENTER

5. Press the  or  button to select " Channel Manager" ,

then press the ENTER

6. Press the  button to select "

7. Press the  or  button to select the channels you want to lock,

then press the ENTER

8. Repeat steps 7 for each channel to be locked or unlocked.

9. Press the EXIT button to exit.

button.

" line.

button.

Select " On" or " Off" in " Child Lock" to easily turn the channels which selected on

to be active or inactive.

button.

English-9

Sorting the Stored Channels

Y ou can ex chang e the numb ers of tw o channels, in order to:

1. Press the MENU button to display the menu. Press the  or  button to select " Channel" , then press the ENTER

2. Press the  or  button to select " Sort" , then press the ENTER

3. Select the channel number that you wish to change by pressing the

 or  button repeatedly. Press the ENTER

4. Press the  or  button to move to the position in which you would like to change and then press the ENTER button.

5. Repeat steps 3 to 4 for another channel to be sorted.

Press the EXIT button to exit.

Assigning Channels Names

Channel names w ill b e assig ned automatically w hen channel information is b roadcast. These names can b e chang ed, allow ing y ou to assig n new names.

1. Press the MENU button to display the menu. Press the  or  button

to select " Channel" , then press the ENTER button.

2. Press the  or  button to select " Name" , then press the ENTER

3. If necessary, select the channel to be assigned to a new name by

pressing the  or  button. Press the ENTER

Repeat steps 3 to 4 for each channel to be assigned to a new name.

Press the EXIT button to exit.

M odify the numeric order in w hich the channels hav e b een automatically stored. G iv e easily rememb ered numb ers to the channels that y ou w atch most often.

button.

The selected channel number and name are moved to right side.

The selected channel is exchanged with the one previously stored to the chosen number.

button.

The selection bar is displayed around the name box.

To...

Select a letter, number or symbol Move on the next letter Move back the previous letter Confirm the name

The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)

Then...

Press the Press the Press the Press the ENTER

 or 



button



button

Fine Tuning Channel Reception

U se fine tuning to manually adj ust a particular channel for optimal reception.

1. Use the number buttons to directly select the channel that you want to fine tune.

2. Press the MENU button to display the menu.

Press the  or  button to select " Channel" , then press the ENTER

3. Press the  or  button to select " Fine Tune" , then press the ENTER

4. Press the  or  button to adjust the fine tuning.

Press the ENTER

5. Press the EXIT button to exit.

Fine tuned channels that have been saved are marked with an asterisk " *" on the right-hand side of the channel number in the channel banner. And the channel number turns red. To reset the fine-tuning, select " Reset" by pressing the  or  button and then press the

ENTER

button.button.

button.

English-10

LNA (Low Noise Amplifier)

I f the TV is operating in a w eak - sig nal area, the L N A function can improv e the reception (a low - noise preamplifier b oosts the incoming sig nal).

1. Press the MENU button to display the menu.

Press the  or  button to select " Channel" , then press the ENTER button.

2. Press the  or  button to select " LNA" , then press the ENTER

3. Press the  or  button to select " On" or " Off" . Press the ENTER

4. Press the EXIT button to exit.

Changing the Picture Standard

Y ou can select the ty pe of picture w hich b est corresponds to y our v iew ing requirements.

1. Press the MENU button to display the menu.

Press the  or  button to select " Picture" , then press the ENTER button.

2. Press the ENTER

3. Press the ENTER

Press the  or  button to select the desired picture effect. Press the ENTER button.

5. Press the EXIT button to exit.

 Dynamic: Selects the picture for high-definition in a bright room.  Standard: Selects the picture for optimum display in a normal environment.

You can also press the P.MODE

button on the remote control to select one of the picture settings.

 Movie: Selects the picture for comfortable display in a dark room.  Custom:

The Picture mode must be adjusted separately for each input source. You can return to the factory defaults picture settings by selecting the " Reset" .

(Refer to " Resetting the Picture Settings to the Factory Defaults" on page 12)

button again, to select " Mode" . button again, to select " Mode" .

Select to view your favorite display settings.

button.

(Refer to " Adjusting the Custom Picture" )

Adjusting the Custom Picture

Y our set has sev eral setting s w hich allow y ou to control picture quality .

1. To select the desired picture effect, follow the

" Changing the Picture Standard" instructions number 1 to 4.

2. Press the  or  button to select a particular item. Press the ENTER

3. Press the  or  button to decrease or increase the value of a particular item.

Press the ENTER

4. Press the EXIT button to exit.

 Contrast: Adjusts the lightness and darkness between objects and the background.  Brightness: Adjusts the brightness of the whole screen.  Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.  Colour: Adjusts the colours, making them lighter or darker.  Tint (NTSC only):

The adjusted values are stored according to the selected Picture mode. In PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted

Changing the Colour Tone

Y ou can select the most comfortab le colour tone to y our ey es.

1. To select the desired picture effect, follow the

" Changing the Picture Standard" instructions number 1 to 4.

2. Press the  or  button to select " Colour Tone" , then press the ENTER

3. Press the  or  button to select the desired colour tone setting.

Press the ENTER

4. Press the EXIT button to exit.

 Cool2: Makes the colour temperature bluer than " Cool1" menu.  Cool1: Makes whites bluish.  Normal: Keeps whites white.

The adjusted values are stored according to the selected Picture mode.

button.

Adjusts the colour of objects, making them more red or green for a more natural look.

button.

 Warm1: Makes whites reddish.  Warm2: Makes the colour temperature redder than

" Warm1" menu.

English-11

Resetting the Picture Settings to the Factory Defaults

Y ou can return to the factory defaults picture setting s.

1. To select the desired picture effect, follow the

" Changing the Picture Standard" instructions number 1 to 4 on page 11 .

2. Press the  or  button to select " Reset" , then press the ENTER

3. Press the EXIT button to exit.

The " Reset" will be set for each picture mode.

Changing the Picture Size

Y ou can select the picture siz e w hich b est corresponds to y our v iew ing requirements.

1. Press the MENU button to display the menu.

Press the  or  button to select " Picture" , then press the ENTER

2. Press the  or  button to select " Size" , then press the ENTER

3. Select the required option by pressing the  or  button.

You can select these options by

simply pressing the P. S IZE button on the remote control.

Press the ENTER

4. Press the EXIT button to exit.

 Auto Wide: Automatically adjusts the picture size to the " 16:9" aspect ratio.  16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.  Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.  4:3: This is the default setting for a video movie or normal broadcasting.

“Auto Wide” function is available only in “TV”, “Ext1”, “Ext2”, “AV”, and “S-Video” mode. In PC Mode, only " 16:9" and " 4:3" mode can be adjusted. Select by pressing the  or  buttons. Use the  or  button to move the picture up and down. After selecting , use the  or  button to magnify or reduce the picture size in the vertical direction.

button.

Freezing the Current Picture

Press the S TI L L b utton to freez e a mov ing picture into a still one. Press ag ain to cancel.

Digital Noise Reduction

I f the b roadcast sig nal receiv ed b y y our TV is w eak , y ou can activ ate the Dig ital N oise R eduction feature to help reduce any static and g hosting that may appear on the screen.

1. Press the MENU button to display the menu.

Press the  or  button to select " Picture" , then press the ENTER

2. Press the  or  button to select " Digital NR" , then press the ENTER

3. Press the  or  button to select " On" or " Off" . Press the ENTER

4. Press the EXIT button to exit.

button.

English-12

DNIe Demo (Digital Natural Image engine)

S amsung ’s new technolog y b ring s y ou more detailed imag es w ith contrast and w hite enhancement. A new imag e compensation alg orithm g iv es v iew ers b rig hter and clearer imag es. DN I e technolog y w ill match ev ery sig nal to y our ey es. Y ou can see how DN I e improv es the picture b y setting DN I e Demo mode to O n.

1. Press the MENU button to display the menu.

Press the  or  button to select " Picture" , then press the ENTER

2. Press the  or  button to select " DNIe Demo" , then press the ENTER

3. Press the  or  button to select " On" or " Off" . Press the ENTER

4. Press the EXIT button to exit.

These functions don’t work in PC mode. The DNle Demo is designed to show the difference between the regular and DNIe pictures. By default, the product displays the picture with DNle applied.

Viewing the Picture In Picture (PIP)

Y ou can display a sub picture w ithin the main picture of set prog ramme or v ideo input. I n this w ay , y ou can w atch the picture of set prog ramme or v ideo input from any connected equipment w hile w atching the main picture.

1. Press the MENU button to display the menu.

Press the  or  button to select " Picture" , then press the ENTER

2. Press the  or  button to select " PIP" , then press the ENTER

Press the PIP button on the remote

control repeatedly to activate or deactivate the " PIP" .

3. Press the ENTER

Press the  or  button to select " On" , then press ENTER button.

If the PIP is activated, the size of the main picture turns to “16:9”.

4. Press the  or  button to select " Source" ,then press ENTER button.

Select a source of the sub picture by pressing the  or  button and press the ENTER button.

The sub picture can serve different source selections based on what the main picture is set to.

5. Press the  or  button to select " Swap" .

To interchange the main picture and the sub picture, select " Swap" option and press the ENTER button.

The main picture and the sub picture are interchanged. I

f main picture is in " PC" mode, " Swap" is not available.

6. Press the  or  button to select " Size" of the sub picture and then press the ENTER button. Select a size of the sub picture by pressing the  or  button and then press the ENTER button.

If main picture is in " PC" mode, " Size" is not available.

7. Press the  or  button to select " Position" , then press the ENTER button.

Select the position of the sub picture by pressing the  or  button and then press the ENTER button.

8. Press the  or  button to select " Programme" and then press the ENTER You can select the channel that you want to view through sub picture by pressing the  or  button. Press the ENTER button.

The " Programme" can be active when the sub picture is set to TV.

9. Press the EXIT button to exit.

You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.

 Source: Used to select a source of the sub picture.  Swap: Used to interchange the main picture and the sub picture.  Size: Used to select a size of the sub picture.  Position: Used to move the sub picture.  Programme: Used to Change the sub picture.

button again.

button.

English-13

PIP Settings

Sub

Main

TV Ext.1 Ext.2

S-Video

Component

HDMI

DTV

Ext.1 X X X X X X O O X

X X X X X

X O O X

Ext.2

X X X X X

X O O

Changing the Sound Standard

Y ou can select the ty pe of the special sound effect to b e used w hen w atching a g iv en b roadcast.

1. Press the MENU button to display the menu. Press the  or  button to select " Sound" , then press the ENTER

2. Press the ENTER

3. Select the required sound effect by pressing the  or  button repeatedly and then

press the ENTER

4. Press the EXIT button to exit.

 Standard: Selects the normal sound mode.  Music: Emphasizes music over voices.  Movie: Provides live and full sound for movies.  Speech: Emphasizes voices over other sounds.

You can also select these options by simply pressing the S.MODE button on the remote control.

 Custom: Selects your custom sound settings.

X X X X X

X O O X

S-Video

X X X X X X X O X

Component

X X X X X X X

button again, to select " Mode" .

button.

(Refer to " Adjusting the Sound Settings" )

O: PIP operates, X: PIP doesn’t operate

X X X X X X X X X

HDMI

O O O O O O X X X

DTV

X X X X X X X X X

button.

Adjusting the Sound Settings

The sound setting s can b e adj usted to suit y our personal preferences.

1. Press the MENU button to display the menu. Press the  or  button to select " Sound" , then press the ENTER

2. Press the  or  button to select " Equalizer" , then press the ENTER

3. Press the  or  button to select a particular item.

Press the ENTER

4. Press the  or  button to reach the required setting. Press the ENTER

5. Press the EXIT button to exit.

If you make any changes to these settings, the Sound Mode is automatically switched to " Custom" .

Connecting Hheadphones

Y ou can connect a set of headphones to y our set if y ou w ish to w atch a TV prog ramme w ithout disturb ing the other people in the room.

When you insert the head set jack into the corresponding port, you can operate only

“Internal Mute” and “Sound Select” (in PIP mode) in Sound menu.

Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system.

button.

English-14

Setting the TruSurround XT (SRS TSXT)

TruS urround X T is a patented S R S technolog y that solv es the prob lem of play ing 5 . 1 multichannel content ov er tw o speak ers. TruS urround deliv ers a compelling , v irtual surround sound ex perience throug h any tw ospeak er play b ack sy stem, including internal telev ision speak ers. I t is fully compatib le w ith all multichannel formats.

1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER

2. Press the  or  button to select “SRS TSXT”, then press the ENTER

Press the  or  button to select “On” or “Off”. Press the

4. Press the EXIT button to exit.

button.

TruSurround XT, SRS and

You can also set these options

simply by pressing the SRS button on remote control.

SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.

Adjusting the Volume Automatically

Each b roadcasting station has its ow n sig nal conditions, and so it is not easy for y ou to adj ust the v olume ev ery time the channel is chang ed. This feature allow s y ou to automatically adj ust the v olume of the desired channel b y low ering the sound output w hen the modulation sig nal is hig h or b y raising the sound output w hen the modulation sig nal is low .

1. Press the MENU button to display the menu. Press the  or  button to select " Sound" , then press the ENTER

2. Press the  or  button to select " Auto Volume" , then press the ENTER

3. Press the  or  button to select " On" or " Off" . Press the ENTER

4. Press the EXIT button to exit.

button.

ENTER

symbol are trademarks of

button.

Selecting the Internal Mute

I f y ou w ant to hear the sound throug h separate speak ers, cancel the internal amplifier.

1. Press the MENU button to display the menu. Press the  or  button to select " Sound" , then press the ENTER button.

2. Press the  or  button to select " Internal Mute" , then press the ENTER

3. Press the  or  button to select " On" or " Off" . Press the ENTER

4. Press the EXIT button to exit.

When " Internal Mute" is set to " On’, the Sound menus except for " Sound Select"

(in PIP mode) cannot be adjusted.

Listening to the Sound of the Sub Picture

During the PI P features activ ation, y ou can listen to the sound of the sub picture.

1. Press the MENU button to display the menu. Press the  or  button to select " Sound" , then press the ENTER

2. Press the  or  button to select " Sound Select" , then press the ENTER

3. Press the  or  button to select " Sub" . Press the ENTER

4. Press the EXIT button to exit.



Main: Used to listen to the sound of the main picture. Sub: Used to listen to the sound of the sub picture.



You can select this option when the " PIP" is set to " On" . (refer to page 13)

English-15

button.

Resetting the Sound Settings to the Factory Defaults

I f G ame M ode is O n, the R eset S ound function is activ ated. S electing the R eset function after setting the equaliz er resets the equaliz er setting to the factory defaults.

1. Press the MENU button to display the menu. Press the  or  button to select " Sound" , then press the ENTER

2. Press the  or  button to select " Reset" , then press the ENTER

3. Press the EXIT button to exit.

You can select this option when the " Game Mode” is set to " On" .

Setting and Displaying the Current Time

Y ou can set the TV ’s clock so that the current time is display ed w hen y ou press the I N F O b utton. Y ou must also set the time if y ou w ish to use the automatic O n/ O ff timers.

1. Press the MENU button to display the menu. Press the  or  button to select " Setup" , then press the ENTER

2. Press the  or  button to select " Time" , then press the ENTER

3. Press the ENTER

To...

Move to " Hour" or " Minute" Set the " Hour" or " Minute" Press the ENTER

5. Press the EXIT button to exit.

If you disconnect the power cord, you have to set the clock again.

You can also set hour and minute by pressing the number buttons on the remote control.

button to select " Clock Set" .

button.

Press the...

 or  button.  or  button.

Setting the Sleep Timer

Y ou can select a time period of b etw een 3 0 and 1 8 0 minutes after w hich the telev ision automatically sw itches to standb y mode.

1. Press the MENU button to display the menu. Press the  or  button to select " Setup" , then press the ENTER

2. Press the  or  button to select " Time" , then press the ENTER

3. Press the  or  button to select " Sleep Timer" , then press the ENTER

4. Press the  or  button repeatedly until the desired time appears

(Off, 30, 60, 90, 120, 150, 180). Press the ENTER

5. Press the EXIT button to exit.

Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears.

The TV automatically switches to standby mode when the timer reaches 0.

Switching the Television On and Off Automatically

Y ou can set the O n/ O ff timers so that the set w ill:

S w itch on automatically and tune to the channel of y our choice at the time y ou select.

S w itch off automatically at the time y ou select.

The first step is to set the telev ision’s clock .

1. Press the MENU button to display the menu. Press the  or  button to select " Setup" , then press the ENTER

2. Press the  or  button to select " Time" , then press the ENTER

3. Press the  or  button to select " On Timer" , then press the ENTER

button.

English-16

4. Press the  or  button to adjust " Hour" , then press the  button to move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return.

5. Press the  or  button to select " Off Timer" , then press the ENTER

6. Press the  or  button to adjust " Hour" , then press the  button to

move to the next step. Set other items using the same method as above. When finished, press the ENTER

7. Press the EXIT button to exit.

Choosing Y our Language

When y ou start using y our set for the first time, y ou must select the lang uag e w hich w ill b e used for display ing menus and indications.

1. Press the MENU button to display the on-screen menu. Press the  or  button to select " Setup" , then press the ENTER

2. Press the  or  button to select " Language" , then press the ENTER

3. Select a particular language by pressing the  or  button repeatedly.

4. Press the EXIT button to exit.

Using Game Mode

When connecting to a g ame console such as Play S tationTM or X b oxTM, y ou can enj oy a more realistic g aming ex perience b y selecting g ame menu.

1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER

2. Press the  or  button to select “Game Mode”, then press the ENTER

3. Press the  or  button to select “On” or “Off”. Press the ENTER

4. Press the EXIT button to exit.

in the picture menu.

•

• Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.

• The Reset Sound function is activated. Selecting the Reset function after setting the equalizer

button.

button to return.

You can also set hour and minute by pressing the number buttons on the remote control.

The " Activation" setting must be set to " Yes" in order for the timers to work.

button.

Press the ENTER

You can choose one of 5 languages.

button.

To disconnect the game console and connect another external device, cancel game mode

If you display the TV menu in Game mode, the screen shakes slightly. Game Mode is not available in TV mode. If Game Mode is On:

Picture Mode and Sound Mode are automatically changed to Custom and users cannot change the mode.

resets the equalizer setting to the factory defaults.

Setting the Blue Screen Mode / Selecting the Melody

B lue S creen: I f no sig nal is b eing receiv ed or the sig nal is v ery w eak , a b lue screen automatically replaces the noisy picture b ack g round. I f y ou w ish to continue v iew ing the poor picture, y ou must set the " B lue S creen" mode to " O ff" .

M elody : Y ou can hear melody sound w hen the telev ision is pow ered on or off.

1. Press the MENU button to display the menu. Press the  or  button to select " Setup" , then press the ENTER

2. Press the  or  button to select " Blue Screen" or " Melody" . Press the ENTER

3. Press the  or  button to select " On" or " Off" . Press the ENTER

4. Press the EXIT button to exit.

button.

English-17

button.

Using the Energy Saving Feature

This function adj usts the b rig htness of the TV so as to reduce pow er consumption. When y ou w atching TV at nig ht, set the " Energ y S av ing " mode option to " H ig h" so as to reduce the daz z ling of y our ey es as w ell as the pow er consumption.

1. Press the MENU button to display the on-screen menu.

Press the  or  button to select " Setup" , then press the ENTER

2. Press the  or  button to select " Energy Saving" , then press the ENTER

3. Select the required option (Off, Low, Medium, High) by pressing the  or  button.

Press the ENTER

4. Press the EXIT button to exit.

Selecting the Source

Y ou can select among ex ternal sources connected to y our TV ’s input j ack s.

1. Press the MENU button to display the menu.

Press the ENTER

2. Press the ENTER

3. Select the required device by pressing the  or  button.

Press the ENTER button.

Press the SOURCE button on the remote control to toggel between all the available source.

When no external device is connected to your set, only " TV" , " Ext.1" , " Ext.2" are activated in the " Source List" . " AV" , " S-Video" , " Component" , " PC" , " HDMI" , " DTV" are activated only when they are connected to your set.

TV mode can be selected by pressing the TV/DTV button, number buttons(0~9), and the

button on the remote control. But it cannot be selected using the SOURCE button.

button.

button, to select " Input" . button again, to select " Source List" .

Editing the Input Source Names

N ame the dev ice connected to the input j ack s to mak e y our input source selection easier.

1. Press the MENU button to display the menu.

Press the ENTER

2. Press the  or  button to select " Edit Name" , then press the ENTER

3. Press the  or  button to select the device that you wish to edit.

Press the ENTER

4. Press the  or  button to select the required device.

Press the ENTER

5. Press the EXIT button to exit.

button, to select " Input" .

button.

English-18

Previewing the DTV Menu System

To help y ou nav ig ate around the on- screen menu sy stem and adj ust the v arious setting s av ailab le, refer to the follow ing illustration.

Available in the Digital TV mode.

Press the D.MENU button.

Guide Now & Next Guide

Full Guide Scheduled List Default Guide

Preference OSD Language

Translucency Level Parental Lock

Feature Subtitle

Subtitle Language Audio Language

Channel Auto Store

Manual Store Edit Favourite Channels Channel Manager

System Product Information

Signal Information Software Upgrade Common Interface Reset

Now/Next, Full Guide

English, Deutsch, Italiano, Français, Svenska High, Medium, Low, Opaque Parental Rating Change PIN

On, Off

Module Information

Application Info CI Menu

Smart card information Language Software Download

The sub-items of the CI Menu may vary depending on the CAM model.

You can select these options by simply

pressing the D.MENU button on the remote control.

Updating the Channel List Automatically

Y ou can update the channel list w hen the b roadcaster adds new S erv ices or if y ou mov e the TV to a new location.

1. Press the D.MENU button to display the DTV menu.

2. Press the  or  button to select " Channel" , then press the ENTER

3. Press the ENTER

4. When it has finished, the number of scanned services will be displayed.

The existing favourite channel list will not be deleted when the channel list is updated.

To stop the scan before it has finished, press the

5. Press the EXIT button to exit.

If the signal status is poor, the “No Service found! Check the aerial connection” message is displayed.

button again, to select " Auto Store" .

English-19

ENTER

button.

button with " STOP" selected.

Updating the Channel List Manually

Y ou can specify the channel or frequency for a fast channel search.

1. Press the D.MENU button to display the DTV menu.

2. Press the  or  button to select " Channel" , then press the ENTER

3. Press the  or  button to select " Manual Store" , then press the ENTER

To...

Move to " Channel" , " Frequency" , or " Bandwidth" Set the " Channel" , or " Bandwidth" Set the " Frequency"

• Frequency: The frequency available in the Channel group is displayed.

• Bandwidth: The available bandwidths are 7 and 8 MHz.

•

Channel: Channel “21” to “68” in sequence are displayed in UK.

5. Press the red button to start the scan for digital services.

When it has finished,channels are updated in the channel list.

6. Press the EXIT button to exit.

You can input by pressing the button on the remote control. You can not change only Frequency and when changing a channel, the Frequency will be

automatically changed.

Editing Y our Favourite Channels

Y ou can edit y our fav ourite channels using the four colour b uttons.

1. Press the D.MENU button to display the DTV menu.

2. Press the  or  button to select " Channel" , then press the ENTER

3. Press the  or  button to select " Edit Favourite Channels" ,

then press the ENTER

4. Press the red button to display all currently stored channels.

5. Press the  or  button to select a channel you want. Press the ENTER

favourite channel list.

• Select All: Select all channels currently displayed.

• Select None: Deselect all selected channels.

• Preview: Displays (a) currently selected channel(s).

5. Press the EXIT button to exit.

A "★" icon is shown next to the selected channel and the channel will be added to the

•

To undo, press the ENTER

The Favorite Channels settings have been completed.

button.

Then...

 or  button  or  button

Numeric button (0~9)

button.

button again.

A dd

Y ou can use this function w hen one or more fav ourite channels hav e b een selected.

1. Press the D.MENU button to display the DTV menu.

2. Press the  or  button to select " Channel" , then press the ENTER

button.

3. Press the  or  button to select " Edit Favourite Channels" ,

then press the ENTER

button.

4. Press the red button in the " Edit Favourite Channels" menu.

To add more channels, refer to the step 5 on the previous description.

If you want to check the channel to be stored, press D.MENU button.

Press the EXIT button to exit.

• To add all channels to the favourite channel list, press the red button.• To add all channels to the favourite channel list, press the red button.To add all channels to the favourite channel list, press the red button.

• To remove all channels, press the green button.• To remove all channels, press the green button.To remove all channels, press the green button.

•• Preview : Displays (a) currently selected channel(s).

• Press the• Press thePress the CH MGR button to display the favourite channel manager.

English-20

+ 49 hidden pages