Samsung LE40M91B User Manual [uk]

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.

Связывайтесь с SAMSUNG по всему миру

Если у вас есть предложения или вопросы по продуктам Samsung, связывайтесь с
информационным центром Samsung.

Звертайтесь у компанію SAMSUNG У РІЗНИХ КРАЇНАХ СВІТУ

У разі виникнення запитань або коментарів стосовно виробів Samsung, звертайтесь у
центр обслуговування клієнтів компанії SAMSUNG.

ТЕЛЕВИЗОР С

ЖИДКОКРИСТАЛ

ЛИЧЕСКИМ

ЭКРАНОМ

LE40M91B

RUSSIA
UKRAINE

Country

Customer Care Center

8-800-200-0400
8-800-502-0000

Web Site

www.samsung.ru
www.samsung.com/ur

Руководство пользователя

Перед началом эксплуатации устройства

внимательно прочитайте настоящее руководство и

сохраните его для будущего использования.

ЭКРАННЫЕ МЕНЮ

ДИСПЛЕЙ ПК

КАРТИНКА В КАРТИНКЕ (PIP)

BN68-01090E-00

ТЕЛЕТЕКСТ

rusарегистрируйтесь в клубе Samsung на сайте

www.samsung.com/global/register

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Меры предосторожности при воспроизведении неподвижного изображения.

Неподвижное изображение может серьезно повредить экран телевизора.

• Не следует просматривать неподвижное изображение на ЖК экране более двух часов, чтобы не вызвать эффект остаточного изображения на экране.
Подобное остаточное изображение также известно как “выгорание экрана”.
Во избежание такого эффекта уменьшите уровень яркости и контрастности экрана при отображении неподвижных изображений.

• Вследствие эксплуатации телевизора с ЖК экраном в формате 4:3 на протяжении долгого времени, слева, справа и в центре экрана

• Длительное отображение неподвижных изображений, например, при подключении экрана к видеоигре и компьютеру, может вызвать появление остаточных изображений.
Во избежание возникновения подобного эффекта, при отображении неподвижных изображений уменьшите уровень параметров “яркости” и “контрастности”.

Запобіжні заходи під час відтворення нерухомого зображення.

Відтворення нерухомого зображення може викликати непоправне пошкодження екрану телевізора.

• Не варто переглядати нерухоме зображення на РК екрані більше двох годин, щоб не викликати появу залишкового зображення
Ефект залишкового зображення також відомий як “вигоряння екрану”.
Щоб уникнути такого ефекту, слід зменшувати рівень яскравості та контрастності на час відтворення нерухомого зображення.

• Внаслідок експлуатації телевізора з РК екраном у форматі 4:3 протягом тривалого часу, зліва, справа та в центрі екрану можуть виникати

• Довготривале відображення нерухомих об’єктів, наприклад, якщо екран підключено до комп’ютера чи відеогри, може спричинити появу на екрані залишкових зображень.
Щоб уникнути цього, слід зменшувати значення параметрів “яскравості” та “контрастності”, коли на екрані знаходиться нерухоме зображення.

caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages
caused by the above effect are not covered by the Warranty.

могут появиться следы границ формата, вызванные разницей излучения света в разных областях экрана. Использование телевизора
для воспроизведения DVD-дисков или подключение игровой приставки может оказать подобное воздействие на экран. Повреждения,
вызванные вышеуказанным эффектом, не подлежат гарантийному ремонту.

сліди меж цього формату, що пояснюється нерівномірністю світлового випромінювання у різних частинах екрану. Подібний ефект може
виникати за умови частого використання телевізора для перегляду DVD-дисків чи підключення ігрової приставки. Умови гарантійного
обслуговування не поширюються на пошкодження, пов’язані з виникненням вищевказаного ефекту.

© 2006 Samsung Electronics Co., Ltd. All rights reserved.

Contents

English

English

CONNECTING AND PREPARING YOUR TV

List of Parts....................................................................................... 2

Installing the Wall Mount Kit ................................................ 2

Viewing the Control Panel ......................................................... 3

Viewing the Connection Panel ................................................. 4

Viewing the Remote Control ..................................................... 6

Installing Batteries in the Remote Control ........................... 6

Switching On and Off .................................................................. 7

Placing Your Television in Standby Mode ............................. 7

Plug & Play ....................................................................................... 7

SETTING THE CHANNELS

Storing Channels Automatically .............................................. 8

Storing Channels Manually ........................................................ 8

Setting the Channel Manager .................................................. 9

Activating the Child Lock ...................................................... 10

Sorting the Stored Channels ..................................................... 10

Assigning Channels Names ....................................................... 11

Fine Tuning Channel Reception ............................................... 11

SETTING THE PICTURE

Using the LNA (Low Noise Amplifier) Feature .................... 12

Changing the Picture Standard ................................................ 12

Adjusting the Custom Picture................................................... 12

Changing the Colour Tone ......................................................... 13

Adjusting the Color Tone with the Preferred

Color Component .......................................................................... 13

Resetting the Picture Settings to the

Factory Defaults ............................................................................. 14

Changing the Picture Size .......................................................... 14

Changing the Auto Wide (4:3) .................................................. 14

Freezing the Current Picture ..................................................... 15

Digital Noise Reduction .............................................................. 15

DNIe Demo (Digital Natural Image engine) ........................ 15

Changing the Colour Space....................................................... 16

Changing the LCD 100Hz ........................................................... 16

Viewing the Picture In Picture (PIP) ........................................ 17

SETTING THE SOUND

Changing the Sound Standard ........................................... 18

Adjusting the Sound Settings ............................................. 18

Setting the TruSurround XT (SRS TSXT) ........................... 18

Adjusting the Volume Automatically ................................ 19

Selecting the Internal Mute .................................................. 19

Listening to the Sound of the Sub Picture...................... 19

Resetting the Sound Settings to the

Factory Defaults ........................................................................ 20

Connecting Headphones ...................................................... 20

Selecting the Sound Mode ................................................... 20

SETTING THE OTHERS

Choosing Your Language ...................................................... 22

Using Game Mode ................................................................... 22

Setting the Blue Screen Mode /

Selecting the Melody ............................................................. 23

Using the Energy Saving Feature ....................................... 23

Setting the Blue Eye ................................................................ 23

Selecting the Source ............................................................... 24

Editing the Input Source Names ........................................ 24

WISELINK

Using the WISELINK Function .............................................. 25

Using the WISELINK Menu .................................................... 26

Using the PHOTO (JPEG) List ................................................ 26

Viewing Photo File Information .......................................... 28

Selecting a Photo and Slide Show ..................................... 28

Rotating ....................................................................................... 29

Zooming-in ................................................................................. 30

Copying Image Files ................................................................ 31

Deleting Image Files................................................................ 31

Printing a Photo ........................................................................ 32

Using the MP3 List ................................................................... 32

Copying Music Files ................................................................. 33

Deleting Music Files ................................................................ 33

Using the Setup Menu ........................................................... 34

USING THE TELETEXT FEATURE

Teletext Decoder ...................................................................... 35

Displaying the Teletext Information .................................. 35

Selecting a Specific Teletext Page ...................................... 36

Using Fastext to Select a Teletext Page ............................ 36

Setting Up Your Remote Control ........................................ 37

Remote Control Codes ........................................................... 39

SETTING THE PC

Setting up Your PC Software

(Based on Windows XP) ......................................................... 42

Display Modes ........................................................................... 42

Setting the PC ............................................................................ 43

RECOMMENDATIONS FOR USE

Using the Anti-Theft Kensington Lock ............................. 44

Troubleshooting:

Before Contacting Service Personnel ............................... 44

Technical and Environmental Specifications ................ 45

SETTING THE TIME

Setting and Displaying the Current Time ........................ 20

Setting the Sleep Timer.......................................................... 21

Switching the Television

On and Off Automatically ..................................................... 21

Symbol Press Important Note One-Touch

English-1

Button

List of Parts

Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.

Remote Control & Batteries

(AAA x 2)



Owner’s Instructions

Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.

Power Cord Cover-Bottom Cleaning Cloth

 Warranty card  Safety Guide  Registration Cards

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage to
the product or injury to yourself or others
if you elect to install the TV on your own.

Remove the stand and cover the bottom hole with a
cap and fasten with two screws.

English-2

Viewing the Control Panel

The product colour and shape may vary depending on the model.

SOURCE

Toggles between all the available input
sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC,
HDMI1, HDMI2). In the on-screen menu,
use this button as you use the ENTER/OK
on the remote control.

button

Press to change channels.
In the on-screen menu, use the
as you use the  and  buttons on the remote
control.
on the TV by using the Channel buttons.)

(Without the Remote Control, you can turn

buttons

MENU

Press to see an on-screen menu of your TV’s features.

Press to decrease or increase the volume.
In the on-screen menu, use the
as you use the  and  buttons on the remote control.

buttons

Speakers

(

Power)
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and lights

up in stand-by mode.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

English-3

Viewing the Connection Panel

[Rear Panel Jacks]

Power Input

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.

[Side Panel Jacks]

English-4

Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial / A cable television network / A satellite network

Connecting HDMI/DVI

-

Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs).

- No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?

- “High Definition Multimedia Interface” allows the transmission of high definition digital video data and multiple

channels of digital audio ( 5.1 channels).

- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).

The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R - AUDIO - L” terminal

on DVI for sound output.

- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that

it has been set to a compatible video output mode as shown in the table below.
Failure to observe this may result in picture distortion, image breakup or no picture.

Supported modes for DVI or HDMI

480i
50 Hz
60 Hz

- Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card.
(This will result in a blank screen being displayed)

- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD)
and connect the VCR (or DVD) to your set.

- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out
connectors on the A/V device.

- Headphone may be connected to the headphone output (

Component

Connecting Set-Top Box, VCR or DVD

-

Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.

Connecting External A/V Devices

- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

X
X
O

480p

O
O
O

While the headphone is connected, the sound from the built-in speakers will be disabled.

SERVICE

- Service connection for qualified service engineer.

Connecting AUDIO

- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio in

connectors on the Amplifier or DVD Home Theater.

Connecting Computer

-

Connect the D- Sub cable (optional) to “PC (PC IN)” on the rear of your set and the other end to the Video Card of your computer.

- Connect the stereo audio cable (optional) to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the
sound card on your computer.

Connecting Component Devices (DTV/DVD)

- Connect component video cables (optional) to component connector (“PR”, “ P B”, “Y”) on the rear of your set and the other

ends to corresponding component video out connectors on the DTV or DVD.

- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)
and connect the DTV (or DVD) to component connector (“P

-

The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio
out connectors on the DTV or DVD.

- This LCD TV displays its optimum picture resolution in 720p mode.

- This LCD TV displays its maximum picture resolution in 1080i mode.

Kensington Lock

- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

- If you want to use a locking device, contact the dealer where you purchased the TV.

-

The place of the Kensington Lock may be different depending on its model.

576i

X
X
O

) on the rear of your set.

R”, “ P B”, “Y”) on your set.

576p

O
X
O

720p

O
O
O

1080i

O
O
O

English-5

Viewing the Remote Control

Selects a target device to be
controlled by the Samsung remote
control

(TV, DVD, STB, CABLE, VCR)

(Refer to page 37~41)
Television Standby button
Number buttons for direct

channel access
One/Two-digit channel selection
Selects the HDMI mode directly
Selects the TV mode directly
VCR/DVD Functions

Rewind, Stop, Play/Pause,
Fast/Forward

Volume increase

Volume decrease
Temporary sound switch-off

Menu display and
change confirmation

Sound mode selection
I t displays "Channel Manager"

on the screen
Picture effect selection

PIP FUNCTIONS

PIP: Picture-In-Picture On / Off

SOURCE:

SWAP: Interchange the main and

sub picture

P: Next channel
P : Previous channel

Sound effect selection
SRS TSXT selection
SET: Adjusts 5 separate devices - TV,

DVD, STB, CABLE, or VCR.

RESET: When your remote does not
work, change the batteries and press
the “RESET” button for 2-3 seconds
before use.

Available source selection

The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired,
and has Braille points on the Power, Channel and Volume buttons.

Installing Batteries in the Remote Control

Input source selection

When pressing this button, a number of

buttons on the remote control (e.g.
Selects a target device, volume, channel and
MUTE buttons) light up for a few seconds and
then turn off to save power. This function is
to conveniently use the remote control at
night or when dark.

Previous channel

Selects the PC mode directly

This function enables you to load saved

photo (JPEG) and audio files (MP3)

and to view or play them on the TV.

P : Next channel

P : Previous channel

Exit the OSD

Control the cursor in the menu

Use to see information on the

current broadcast

Picture freeze

Picture size selection

Automatic Power-off

Teletext Functions

Exit from the teletext display

Teletext index

PIP: Teletext hold

SOURCE: Teletext size selection

SWAP: Teletext store

Teletext mode selection (LIST/FLOF)

Teletext sub page

P : Teletext next page

P : Teletext previous page

Teletext cancel

Teletext reveal

Alternately select Teletext, Double, or Mix.

Fastext topic selection

1. Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batterie

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

s.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a
long time. The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

English-6

Switching On and Off

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2. Press the button on the front of the set.

You also can press the POWER button or the

The programme that you were watching last is reselected automatically.

TV

( ) button on the remote control to turn the TV on.

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4. To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful
when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER

The screen is turned off and a blue standby indicator appears on the front of your set.

button on the remote control.

2. To switch your set back on, simply press the POWER , numeric buttons (0~9) or channel

up/down (

/ ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial.

Plug & Play

When the TV is initially powered on, several basic settings proceed
automatically and subsequently. The following settings are available.

1. Press the POWER button on the remote control.
The message “Start Plug & Play” is displayed with “OK” selected.

Press the  or  buttons to select “Shop” or “Home”, then the ENTER/OK button.

2.

We recommend setting the TV to Home mode for the best picture in your home envronment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop Mode, press and hold the MENU button on the side

panel of the TV for five seconds to return to Dynamic (Home) mode.

3. Select the appropriate language by pressing the  or  button.
Press the ENTER/OK button to confirm your choice.

4. The message “Check antenna input.” is displayed with “OK” selected.
Press the ENTER/OK button.

Please check that the antenna cable is connected correctly.

5. Select the appropriate country by pressing the  or  button.
Press the ENTER/OK button to confirm your choice.

6. The “Auto Store” menu is displayed with the “Start” selected.
Press the ENTER/OK button.

The channel search will start and end automatically.
After all the available channels are stored, the “Clock Set” menu appears.
Press the

ENTER/OK

7. Press the ENTER/OK button.

Select the “Hour” or “Minute” by pressing the

Set the “Hour” or “Minute” by pressing the

You can also set the hour and minute by pressing the number buttons on the remote control.

8. Press the ENTER/OK button to confirm your setting.

button at any time to interrupt the memorization process.

 or 

 or 

button.

button.

 Language: Select your language.
 Country: Select your country.
 Auto Store: Automatically scans for and stores channels available in the local area.
 Clock Set: Sets the current time for the TV clock.

English-7

If you want to reset this feature...

1. Press the MENU button to display the menu.

Press the  or 

button

to select “Setup”, then press the

ENTER/OK

button.

2. Press the ENTER/OK button again, to select “Plug & Play”.

3. The message to “Start Plug & Play” is displayed.

- Storing Channels Automatically

- Storing Channels Manually

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically
allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1. Press the MENU button to display the menu.
Press the  or  button to select “Channel”, then press the

2. Press the ENTER/OK button to select “Country”.

3. Select the appropriate country by pressing the  or  button.

Press the ENTER/OK button to confirm your choice.

4. Press the  or  button to select “Auto Store”, then press the

5. Press the ENTER/OK button.

The TV will begin memorizing all of the available channels.

Press the

ENTER/OK

button at any time to interrupt the memorization process and return to the “Channel” menu.

6. After all the available channels are stored, the “Sort” menu appears.

ENTER/OK button.

ENTER/OK button.

Storing Channels Manually

You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:

Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.

1. Press the MENU button to display the menu.
Press the  or  button to select “Channel”, then press the

2. Press the  or  button to select “Manual Store”, then press the

3. Press the

ENTER/OK button to select “Programme”.

4. To assign a programme number to a channel, find the correct number by pressing the  or  button
and then press the

You can also set a programme number by pressing number buttons on the remote control.

ENTER/OK button.

ENTER/OK button.

ENTER/OK button.

English-8

5. Press the  or  button to select “Colour System”, then press the ENTER/OK button.

6. Select the colour standard required by pressing the  or  button then, press the

7. Press the  or  button to select “Sound System”, then press the

ENTER/OK button.

8. Select the sound standard required by pressing the  or  button, then press the

If there is an abnormal sound or no sound, re-select the sound system required.

9.

If you know the number of the channel to be stored, press the  or  button to select “Channel”. Press the ENTER/OK button.

ENTER/OK button.

ENTER/OK button.

Select C (Air channel) or S (Cable channel) by pressing the  or  button. Press the  button to select channel.
Select the required number by pressing the  or  button and then press the

Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.

ENTER/OK button.

10. If you do not know the channel numbers, press the  or  button to select “Search”.
Press the ENTER/OK button. Search by pressing the  or  button and then press the ENTER/OK button.

11. Press the  or  button to select “Store”. Press the ENTER/OK button to select “OK”.

12. Repeat steps 3 to 11 for each channel to be stored.

 Programme: Selects a program number for the channel.
 Colour System: Sets the colour supporting system.
 Sound System: Sets the sound supporting system.

Setting the Channel Manager

Set the channels according to your preference.
You can easily delete, add, or lock the channel you want.

1. Press the MENU button to display the menu. Press the  or  button
to select “Channel”, then press the

2.

Press the  or  button to select “Channel Manager”,

then press the ENTER/OK button.

3.

Press the ENTER/OK button again, to select “Channel Manager”.

4

.

Press the  button to select “ ” line.

5

.

Press the  or  button to select the undesired channel,

then press the ENTER/OK button to cancel.

6. Repeat steps 5 for each channel to be selected or canceled

7. Press the EXIT button to exit.

“ ”

is active when “Child Lock” is selected to “On”.

You can select these options by

simply pressing the CH MGR
button on the remote control.

 Channel: Selects a channel.
 Search: Scans for the frequency value for the channel.
 Store: Saves your settings.

ENTER/OK button.

English-9

Activating the Child Lock

This feature allows you to prevent unauthorized users, such as children, from
watching unsuitable programmes by muting out video and audio. Child Lock can­not be released using the buttons on the side.
Only the remote control can release the Child Lock setting, so keep the remote
control away from children.

1. Press the MENU button to display the menu. Press the  or  button
to select “Channel”, then press the

2.

then press the ENTER/OK button.

3.

button.

4.

5.

6

.

7

.

then press the ENTER/OK button.

8. Repeat steps 7 for each channel to be locked or unlocked.

9. Press the EXIT button to exit.

Sorting the Stored Channels

You can exchange the numbers of two channels, in order to:

automatically stored.

1. Press the MENU button to display the menu. Press the  or  button
to select “Channel”, then press the

2.

3.

 or  button repeatedly. Press the ENTER/OK button.

4.

5.

6.

ENTER/OK button.

Press the  or  button to select “Channel Manager”,

Press the  or  button to select “Child Lock”, then press the ENTER/OK

Press the  or  button to select “On”. Press the

ENTER/OK

button.

Press the  or  button to select “Channel Manager”, then press the

ENTER/OK button.

Press the  button to select “ ” line.

Press the  or  button to select the channels you want to lock,

Select “On” or “Off” in “Child Lock” to easily turn the channels which
selected on

Press the  or  button to select “Sort”, then press the

“ ”

to be active or inactive.

Modify the numeric order in which the channels have been

Give easily remembered numbers to the channels that you watch
most often.

ENTER/OK button.

ENTER/OK

button.

Select channel number that you wish to change by pressing the

The selected channel number and name are moved to right side.

Press the

 or 

and then press the

The selected channel is exchanged with the one previously stored to the chosen
number.

button to move to the position in which you would like to change

ENTER/OK

button.

Repeat steps 3 to 4 for another channel to be sorted.
Press the EXIT button to exit.

English-10

Assigning Channels Names

Channel names will be assigned automatically when channel
information is broadcast.
These names can be changed, allowing you to assign new names.

1. Press the MENU button to display the menu. Press the  or  button
to select “Channel”, then press the

2.

Press the  or  button to select “Name”, then press the

3.

If necessary, select the channel to be assigned to a new name by

pressing the

4.

5.

Repeat steps 3 to 4 for each channel to be assigned to a new name.

Press the EXIT button to exit.

6.

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.

1. Use the number buttons to directly select the channel that
you want to fine tune.

2. Press the MENU button to display the menu.
Press the  or  button to select “Channel”, then press the ENTER/OK button.

3. Press the  or  button to select “Fine Tune”, then press the
button.

4. Press the  or  button to adjust the fine tuning.
Press the

5. Press the EXIT button to exit.

Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand
side of the channel number in the channel banner. And the channel number turns red.
To reset the fine-tuning, select “Reset” by pressing the  or  button and then press the

ENTER/OK button.

ENTER/OK button.

ENTER/OK

 or 

The selection bar is displayed around the name box.

To. ..

Select a letter, number or symbol

Move on the next letter

Move back the previous letter

Confirm the name

The characters available are :
Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)

ENTER/OK

button. Press the ENTER/OK button.

Then...

 or 

Press the

Press the  button



Press the
Press the ENTER/OK button

button.

button

button

ENTER/OK

button.

English-11

Using the LNA (Low Noise Amplifier) Feature

This function is very useful in the situation that the TV is used in a weak
signal area. LNA amplifies the TV signal in the weak signal area, a low-noise
preamplifier boosts the incoming signal.

1. Press the MENU button to display the menu.

Press the  or  button to select “Channel”, then press the

2.

Press the  or  button to select “LNA”, then press the ENTER/OK button.

3.

Select “Off“ or “On“ by pressing the  or  button.
Press the ENTER/OK button.

4.

Press the EXIT button to exit.

If the picture is noisy with the LNA set to On, select Off.
LNA setting must be set for each individual channel.

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing
requirements.

1. Press the MENU button to display the menu. Press the  or 

button to select “Picture”, then press the

2.

Press the ENTER/OK button again, to select “Mode”.

You can also press the

P.MODE button on the remote
control to select one of the
picture settings.

Press the

3.

4.

 Dynamic: Selects the picture for high-definition in a bright room.
 Standard: Selects the picture for optimum display in a normal environment.
 Movie: Selects the picture for comfortable display in a dark room.
 Custom: Select to view your favorite display settings.

(Refer to “Resetting the Picture Settings to the Factory Defaults” on page 14)

ENTER/OK button again.

Press the

 or 

Press the

button to select the desired picture effect.

ENTER/OK

button.

Press the EXIT button to exit.

(Refer to “Adjusting the Custom Picture”)

The Picture mode must be adjusted separately for each input source.
You can return to the factory defaults picture settings by selecting the “Reset”.

ENTER/OK button.

ENTER/OK button.

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3.

2.

Press the
Press the

3.

Press the

particular item.

4.

Press the EXIT button to exit.

 Contrast: Adjusts the lightness and darkness between objects and the background.
 Brightness: Adjusts the brightness of the whole screen.
 Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
 Colour: Adjusts the colours, making them lighter or darker.
 Tint (NTSC only):

The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted

 or  button

ENTER/OK

 or  button

to select a particular item.

button.

to decrease or increase the value of a

Press the ENTER/OK button.

Adjusts the colour of objects, making them more red or green for a more natural look.

English-12

Changing the Colour Tone

You can select the most comfortable colour tone to your eyes.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3 on page 12.

2.

Press the  or  button to select “Colour Tone”, then press the ENTER/OK button.

3.

Press the

 or  button

Press the

ENTER/OK

4.

Press the EXIT button to exit.

 Cool2: Makes the colour temperature bluer

than “Cool1” menu.

 Cool1: Makes whites bluish.
 Normal: Keeps whites white.

The adjusted values are stored according to the selected Picture mode.

to select the desired colour tone setting.

button.

 Warm1: Makes whites reddish.
 Warm2: Makes the colour temperature

Adjusting the Color Tone with the Preferred Color Component

You can adjust a picture’s color tone with your preferred color component.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3 on page 12.

2.

Press the  or  button to select “Colour Manager”, then press the

ENTER/OK button.

3.

Press the

 or  button

Press the

ENTER/OK

4.

Press the

 or  button

particular item.

5.

Press the EXIT button to exit.

 R Contrast:

 G Contrast:

 B Contrast:

 R Brightness:
 G Brightness:
 B Brightness:
 Reset:

Lightens or intensifies the red component of the border between objects and
the background.
Lightens or intensifies the green component of the border between objects
and the background.

Lightens or intensifies the blue component of the border between objects and

the background.
Adjusts the brightness of the red component for the entire screen.
Adjusts the brightness of the green component for the entire screen.
Adjusts the brightness of the blue component for the entire screen.

Resets all settings to the defaults.

to select a particular item.

button.

to decrease or increase the value of a

Press the ENTER/OK button.

redder than “Warm1” menu.

You cannot select a "Colour Tone" in the "Colour Manager".

English-13

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3 on page 12.

2. Press the  or  button to select “Reset”, then press the ENTER/OK button.

3.

Press the EXIT button to exit.

The “Reset” will be set for each picture mode.

Changing the Picture Size

You can select the picture size which best corresponds to your
viewing requirements.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER/OK button.

2. Press the  or  button to select “Size”, then press the ENTER/OK button.

3. Select the required option by pressing the  or  button.

Press the

You can select these options

by simply pressing the P.SIZE
button on the remote control.

ENTER/OK

4.

Press the EXIT button to exit.

 Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
 WIDE 4:3 : Magnify the size of the picture more than 4:3.
 Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
 4:3: This is the default setting for a video movie or normal broadcasting.

“Auto Wide” function is available only in "TV", "Ext1", "Ext2", "AV", and "S-Video" mode.
In PC Mode, only “16:9” and “4:3” mode can be adjusted.

Zoom : Select by pressing the  or  buttons. Use the  or  button to move the

picture up and down. After selecting , use the  or  button to magnify or
reduce the picture size in the vertical direction.

WIDE 4:3 : Move the screen up/down using the  or  button after selecting the

by pressing the  or ENTER/OK button.

button.

Changing the Auto Wide (4:3)

Adjusts the display picture size to 4:3 appropriate for input signal

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER/OK button.

2. Press the  or  button to select “Auto Wide (4:3)”, then press the

ENTER/OK button.

3. Select the required option by pressing the  or  button.

4.

 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
 WIDE 4:3 : Magnify the size of the picture more than 4:3.
 Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
 4:3: This is the default setting for a video movie or normal broadcasting.

Press the

ENTER/OK

button.

Press the EXIT button to exit.

These functions don’t work in "Component", "PC", "HDMI1", "HDMI2" mode.

English-14

Freezing the Current Picture

Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.

Digital Noise Reduction

If the broadcast signal received by your TV is weak, you can activate the Digital
Noise Reduction feature to help reduce any static and ghosting that may appear
on the screen.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER/OK button.

2. Press the  or  button to select “Digital NR”, then press the ENTER/OK

button.

3.

Press the  or  button to select “On” or “Off”. Press the

4. Press the EXIT button to exit.

DNIe Demo (Digital Natural Image engine)

Samsung’s new technology brings you more detailed images with
contrast and white enhancement. A new image compensation algorithm gives
viewers brighter and clearer images. DNIe technology will match every signal to
your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode
to On.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER/OK button.

2. Press the  or  button to select “DNIe Demo”, then press the ENTER/OK

button.

3.

Press the  or  button to select “On” or “Off”. Press the

4. Press the EXIT button to exit.

These functions don’t work in PC mode.
The DNle Demo is designed to show the difference between the regular and

DNIe pictures.

By default, the product displays the picture with DNle applied.

ENTER/OK

ENTER/OK

button.

button.

English-15

Changing the Colour Space

Colour space is a colour matrix composed of red, green, and blue colours. Select
your favorite colour space and experience the world of natural colour.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER/OK button.

2. Press the  or  button to select “Colour Space”, then press the

ENTER/OK button.

3.

4. Press the EXIT button to exit.

Changing the LCD 100Hz

You can experience more natural pictures and clearer texts without motion blur
even in fast moving scenes.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER/OK button.

2. Press the  or  button to select “LCD 100Hz”, then press the

ENTER/OK button.

3.

4. Press the EXIT button to exit.

Press the  or  button to select “Wide” or “Auto”.
Press the

ENTER/OK

 Wide : Wide Colour Space offers deep and rich colour tone.
 Auto : Auto Colour Space automatically adjusts to natural colour tone based on program

sources.

Press the  or  button to select “On” or “Off”. Press the

button.

ENTER/OK

button.

English-16

Viewing the Picture In Picture (PIP)

You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the picture of set pro­gramme or video input from any connected equipment while watching the main
picture.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER/OK button.

2.

Press the  or  button to select “PIP”, then press the

3. Press the ENTER/OK button again.

Press the  or  button to select “On”, then press ENTER/OK button.

If the PIP is activated, the size of the main picture turns to “16:9”.

4. Press the  or  button to select “Source”,

Press the PIP button on the

remote control repeatedly to
activate or deactivate the “PIP”.

then press ENTER/OK button. Select a source of the sub picture by
pressing the  or  button and press the ENTER/OK button.

The sub picture can serve different source selections based on what the main picture is set to.

5. Press the  or  button to select “Swap”.
To interchange the main picture and the sub picture, select “Swap” option and
press the ENTER/OK button.

The main picture and the sub picture are interchanged.
I

f main picture is in “PC” mode, “Swap” is not available.

6. Press the  or  button to select “Size” of the sub picture and then

press the ENTER/OK button. Select a size of the sub picture by
pressing the  or  button and then press the ENTER/OK button.

If main picture is in “PC” mode, “Size” is not available.

7. Press the  or  button to select “Position”, then press the ENTER/OK

button. Select the position of the sub picture by pressing the  or 
button and then press the ENTER/OK button.

8. Press the  or  button to select “Programme” and then press the ENTER/OK
button. You can select the channel that you want to view through sub picture
by pressing the  or  button.
Press the ENTER/OK button.

The “Programme” can be active when the sub picture is set to TV.

9. Press the EXIT button to exit.

You may notice that the picture in the PIP window becomes slightly unnatural when you use
the main screen to view a game or karaoke.

 Source: Used to select a source of the sub picture.
 Swap: Used to interchange the main picture and the

sub picture.

PIP Settings

Sub

TV
Ext.1
Ext.2

AV

S-Video

Component

PC
HDMI1
HDMI2

TV

X
X
X
X
X
X
O
O
O

Main

(O: PIP operates, X: PIP doesn’t operate)

Ext.1

Ext.2

X

X

X

X

X

X

X

X

X

X

X

X

O

O

O

O

O

O

ENTER/OK

 Size: Used to select a size of the sub picture.
 Position: Used to move the sub picture.
 Programme: Used to Change the sub picture.

AV

S-Video
X
X
X
X
X
X
O
O
O

Component
X
X
X
X
X
X
X
O
O

PC
X
X
X
X
X
X
X
O
O

button.

HDMI1
X
X
X
X
X
X
X
X
X

HDMI2

O

O

O

O

O

O

O

O

O

O

O

O

X

X

X

X

X

X

English-17

Changing the Sound Standard

You can select the type of the special sound effect to be used when watching a
given broadcast.

1. Press the MENU button to display the menu. Press the  or  button to
select “Sound”, then press the ENTER/OK button.

2. Press the ENTER/OK button again, to select “Mode”.

3. Select the required sound effect by pressing the  or  button repeatedly

and then press the ENTER/OK button.

4. Press the EXIT button to exit.

You can also select these options by
simply pressing the S.MODE button
on the remote control.

 Standard: Selects the normal sound mode.
 Music: Emphasizes music over voices.
 Movie: Provides live and full sound for movies.
 Speech: Emphasizes voices over other sounds.

Adjusting the Sound Settings

The sound settings can be adjusted to suit your personal preferences.

1. Press the MENU button to display the menu. Press the  or  button to
select “Sound”, then press the ENTER/OK button.

2. Press the  or  button to select “Equalizer”, then press the ENTER/OK button.

3.

Press the
Press the

4. Press the  or  button to reach the required setting.
Press the ENTER/OK button.

5. Press the EXIT button to exit.

If you make any changes to these settings, the Sound Mode is automatically switched to

“Custom”.

 or  button

ENTER/OK

button.

 Custom: Selects your custom sound settings.

(Refer to “Adjusting the Sound Settings”)

to select a particular item.

Setting the TruSurround XT (SRS TSXT)

TruSurround XT is a patented SRS technology that solves the problem of playing

5.1 multichannel content over two speakers.
TruSurround delivers a compelling,virtual surround sound experience through any
two-speaker playback systems, including internal television speakers. It is fully
compatible with all multichannel formats.

1. Press the MENU button to display the menu. Press the  or  button to
select “Sound”, then press the ENTER/OKbutton.

2. Press the  or  button to select “SRS TSXT”, then press the ENTER/OK button.

3.

Press the  or  button to select “On” or “Off”. Press the

4. Press the EXIT button to exit.

You can also set these options

simply by pressing the SRS but-
ton on remote control.

TruSurround XT, SRS and symbol are trademarks of
SRS Labs, Inc. TruSurround XT technology is incorporated under license
from SRS Labs, Inc.

English-18

ENTER/OK

button.

Adjusting the Volume Automatically

Each broadcasting station has its own signal conditions, and so it is not easy for
you to adjust the volume every time the channel is changed.
This feature allows you to automatically adjust the volume of the desired channel
by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.

1. Press the MENU button to display the menu. Press the  or  button to
select “Sound”, then press the ENTER/OK

2. Press the  or  button to select “Auto Volume”, then press the
ENTER/OK

3.

Press the  or  button to select “On” or “Off”. Press the

4. Press the EXIT button to exit.

Selecting the Internal Mute

If you want to hear the sound through separate speakers, cancel the internal
amplifier.

1. Press the MENU button to display the menu. Press the  or  button to
select “Sound”, then press the ENTER/OK button.

2. Press the  or  button to select “Internal Mute”, then press the
ENTER/OK

3.

Press the  or  button to select “On” or “Off”. Press the

4. Press the EXIT button to exit.

When “Internal Mute” is set to “On’, the Sound menus except for

“Sound Select” (in PIP mode) cannot be adjusted.

button.

button.

button.

ENTER/OK

ENTER/OK

button.

button.

Listening to the Sound of the Sub Picture

During the PIP features activation, you can listen to the sound of the sub pic­ture.

1. Press the MENU button to display the menu. Press the  or  button to
select “Sound”, then press the ENTER/OK button.

2. Press the  or  button to select “Sound Select”, then press the
ENTER/OK button.

3. Press the  or  button to select “Sub”. Press the ENTER/OK button.

4. Press the EXIT button to exit.

 Main: Used to listen to the sound of the main picture.


Sub: Used to listen to the sound of the sub picture.

You can select this option when the “PIP” is set to “On”.

English-19

Resetting the Sound Settings to the Factory Defaults

If Game Mode is On, the Reset Sound function is activated. Selecting the Reset
function after setting the equalizer resets the equalizer setting to the factory
defaults.

1. Press the MENU button to display the menu. Press the  or  button to
select “Sound”, then press the ENTER/OK button.

2. Press the  or  button to select “Reset”, then press the ENTER/OK button.

3. Press the EXIT button to exit.

You can select this option when the “Game Mode” is set to “On”.

Connecting Headphones

You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.

When you insert the head set jack into the corresponding port,
you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu.
(Refer to “Selecting the Internal Mute” on page 19)

Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.

Selecting the Sound Mode

You can set the sound mode by pressing the “DUAL” button.
When you press it, the current sound mode is displayed on the screen.

Audio Type

You can also set these options
simply by pressing the DUAL
button on remote control.

FM

Stereo

NICAM

Stereo

Mono

Stereo

Dual

Mono

Stereo

Dual

DUAL 1/2

MONO

STEREO ↔ MONO

DUAL 1 ↔ DUAL 2

MONO

MONO ↔ STEREO

MONO ↔ DUAL 1

DUAL 2

Default

Automatic

change

DUAL 1

Automatic

change

DUAL 1

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is displayed when you press
the INFO button. You must also set the time if you wish to use the automatic
On/Off timers.

1. Press the MENU button to display the menu. Press the  or  button to
select “Setup”, then press the ENTER/OK button.

Press the  or  button to select “Time”, then press the

2.

3. Press the ENTER/OK button to select “Clock Set”.

4.

To. ..

Move to “Hour” or “Minute”
Set the “Hour” or “Minute”
Press the ENTER/OK button.

5. Press the EXIT button to exit.

If you disconnect the power cord, you have to set the clock again.

You can also set hour and minute by pressing the number buttons on the remote control.

English-20

ENTER/OK

Press the...

 or  button.
 or  button.

button.

Setting the Sleep Timer

You can select a time period of between 30 and 180 minutes after which the
television automatically switches to standby mode.

1. Press the MENU button to display the menu. Press the  or  button to
select “Setup”, then press the ENTER/OK button.

2.

Press the  or  button to select “Time”, then press the

3. Press the  or  button to select “Sleep Timer”, then press the
ENTER/OK button.

4. Press the  or  button repeatedly until the desired time appears
(Off, 30, 60, 90, 120, 150, 180). Press the ENTER/OK button.

Press the SLEEP button on the
remote control repeatedly until
the appropriate time interval
appears.

5. Press the EXIT button to exit.

The TV automatically switches to standby mode when the timer reaches 0.

Switching the Television On and Off Automatically

You can set the On/Off timers so that the set will:

Switch on automatically and tune to the channel of your choice at

the time you select.

Switch off automatically at the time you select.

The first step is to set the television’s clock.

1. Press the MENU button to display the menu. Press the  or  button to
select “Setup”, then press the ENTER/OK

2. Press the  or  button to select “Time”, then press the ENTER/OK

3. Press the  or  button to select “On Timer”, then press the ENTER/OK

4. Press the  or  button to adjust “Hour”, then press the  button to

move to the next step. Set other items using the same method as above.
When finished, press the ENTER/OK button to return.

5. Press the  or  button to select “Off Timer”, then press the ENTER/OK

6. Press the  or  button to adjust “Hour”, then press the  button to

move to the next step. Set other items using the same method as above.
When finished, press the ENTER/OK

7. Press the EXIT button to exit.

You can also set hour and minute by pressing the number buttons on the remote control.
The "Activation" setting must be set to "Yes" in order for the timers to work.

button.

button to return.

ENTER/OK

button.

button.

button.

button.

English-21

Choosing Your Language

Using Game Mode

When you start using your set for the first time, you must select the
language which will be used for displaying menus and indications.

1. Press the MENU button to display the on-screen menu.
Press the  or  button to select “Setup”, then press the

2. Press the  or  button to select “Language”, then press the

ENTER/OK button.

ENTER/OK button.

3. Select a particular language by pressing the  or  button repeatedly.
Press the

ENTER/OK button.

You can choose one of 21 languages.

4. Press the EXIT button to exit.

When connecting to a game console such as PlayStationTM or XboxTM,
you can enjoy a more realistic gaming experience by selecting game menu.

1. Press the MENU button to display the menu. Press the  or  button to

select “Setup”, then press the ENTER/OK button.

2. Press the  or  button to select “Game Mode”, then press the

ENTER/OK button.

3.

Press the  or  button to select “On” or “Off”. Press the

ENTER/OK

button.

4. Press the EXIT button to exit.

To disconnect the game console and connect another external device, set Game to Off in the

setup menu.

If you display the TV menu in Game mode, the screen shakes slightly.

Game Mode is not available in TV mode.
If Game Mode is On:

• Picture Mode and Sound Mode are automatically changed to Custom and users can
not change the mode.

• Adjust the sound using the equalizer.

• The Reset Sound function is activated. Selecting the Reset function after setting the
equalizer resets the equalizer setting to the factory defaults.

English-22

Setting the Blue Screen Mode / Selecting the Melody

Blue Screen:
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background. If you wish to continue viewing the poor pic­ture, you must set the "Blue Screen" mode to "Off".

Melody:
You can hear melody sound when the television is powered on or off.

1. Press the MENU button to display the menu. Press the  or  button to

select “Setup”, then press the ENTER/OK button.

2. Press the  or  button to select “Blue Screen” or “Melody”.

Press the ENTER/OK button.

3.

Press the  or  button to select “On” or “Off”.
Press the

ENTER/OK

button.

4. Press the EXIT button to exit.

Using the Energy Saving Feature

This function adjusts the brightness of the TV so as to reduce power consumption.
When you watching TV at night, set the "Energy Saving " mode option to "High" so
as to reduce the dazzling of your eyes as well as the power consumption.

1. Press the MENU button to display the on-screen menu.

Press the  or  button to select “Setup”, then press the

2. Press the  or  button to select “Energy Saving”, then press the

button.

3. Select the required option (Off, Low, Medium, High) by pressing
the  or  button. Press the

4. Press the EXIT button to exit.

ENTER/OK button.

ENTER/OK button.

ENTER/OK

Setting the Blue Eye

You can set the power of Blue LED to be on. If the power is off when
Blue Eye TV is off, the Blue LED goes off. This will save power and reduce eye
fatigue.

1. Press the MENU button to display the on-screen menu.

Press the  or  button to select “Setup”, then press the

2. Press the  or  button to select “Blue Eye”, then press the

3.

Press the  or  button to select “On” or “Off”. Press the

Off: LED(Blue) will not come on.
On: LED(Blue) will come on after you turn the TV off.

ENTER/OK button.

ENTER/OK button.

ENTER/OK

button.

4. Press the EXIT button to exit.

English-23

Selecting the Source

You can select among external sources connected to
your TV’s input jacks.

1. Press the MENU button to display the menu.

Press the ENTER/OK button, to select “Input”.

2. Press the

3. Select the required device by pressing the  or  button.

Press the ENTER/OK button.

Press the SOURCE button on the remote control to toggel between all the available source.
TV mode can be selected by pressing the TV button, number buttons(0~9), and the

button on the remote control. But it cannot be selected using the SOURCE button.

/

You can select PC mode by simply pressing the PC button on the remote control.

You can select HDMI mode by simply pressing the HDMI button on the remote control.

Editing the Input Source Names

Name the device connected to the input jacks to make your input source
selection easier.

1. Press the MENU button to display the menu.

Press the ENTER/OK button, to select “Input”.

2. Press the  or  button to select “Edit Name”, then press the

ENTER/OK button.

3. Press the  or  button to select the device that you wish to edit.

Press the ENTER/OK

4. Press the  or  button to select the required device.

Press the ENTER/OK button.

5. Press the EXIT button to exit.

ENTER/OK button again, to select “Source List”.

When no external device is connected to your set, only “TV”, “Ext.1”, “Ext.2” are
activated in the “Source List ”. “AV”, “S-Video”, “Component”, “PC”,
“HDMI1” , “HDMI2” are activated only when they are connected to your set.

P

button.

English-24

Using the WISELINK Function

You can view stored photos (JPEG files) or play music files (MP3) using a memory card or USB storage media.

The "Photo" menu supports image files in the JPEG format only.
The "Music" menu supports sound files in the MP3 format only.

Compact Flash (CF) / Micro Driver (MD) / MAGICSTOR

Secure Digital Card (SD Card) / Smart Media Card (SM) /

Multimedia Card (MMC) / Memory Stick / MSPRO / XD

USB Mass Storage Class

The USB hub type is not available becuase using the
Half-Speed USB can cause the hardware limitation.
(Only the Full-Speed USB is available.)

Photo Printer

1. First, connect the memory card or USB storage media containing your files to the WISELINK terminal
on the side of the TV.

Supported Memory Cards
Some types of Memory Cards or USB hosts, depending on the manufacturer,may not be supported.

Compact Flash (CF) Micro Driver (MD) MAGICSTOR Secure Digital Card

Multimedia Card (MMC) Memory Stick MSPRO XD

2. Using the Remote Control Button in WISELINK Menu

Button Operations

Move the cursor and select an item.

Select the currently selected item.

Play or pause the Slide Show or MP3 file.

Stop the current function and return to the previous high-level menu.

Run various functions from the Photo and Music menus.

Stop the current slide show or MP3 file.

Page Up or Down (file list item)

Return to the previous menu

English-25

(SD Card)

Smart Media Card

Using the WISELINK Menu

This menu shows JPEG and MP3 files and folders saved on a
memory card.

1. Press the MENU button to display the menu.

Press the ENTER/OK button, to select “Input”.

2. Press the  or  button to select “WISELINK”, then press the

ENTER/OK button.

3. Press the  or  button to select the corresponding Memory Card, then press

the ENTER/OK button.

4. Press the  or  button to move to an item,

then press the ENTER/OK button.

5. To exit WISELINK, press the WISELINK button on the remote control.

You can select these options by simply pressing the WISELINK button on the

Using the PHOTO (JPEG) List

This menu shows JPEG files and folders saved on a memory card.

1. Complete Steps 1 to 4 of "Using the WISELINK Menu".

2. Press the  or  button to select “Photo”, then press the ENTER/OK button.

3. Press the ,, and  buttons to select a file, then press the

ENTER/OK button.

photo in full screen.

4. Press the INFO button to configure the options.

"View", "Slide Show", "Copy", "Copy All files",

folder icon

photo icon

Move to the previous
folder stage icon

You can select these options

by simply pressing the WISELINK
button on the remote control.

"Delete", "Delete All Files", "Print"
When a full screen is displayed:
"Slide Show", "Rotate", "Zoom", "Copy", "Delete", "Print", "List"

5. To exit WISELINK, press the WISELINK button on the remote control.

At this point, the icon will appear at the top left of the screen.

• This menu only shows files whose file extension is JPEG.

Files of other formats such as bmp or tiff will not be displayed.

• The files are displayed on a page. 15 thumbnail photos are displayed per page.

•

• Folders are displayed first and they are followed by all JPEG files in the current folder.

The folders and JPEG files are sorted in alphabetical order.

If the "Insert memory cards." message is displayed, check whether the memory card
is correctly inserted into the WISELINK terminal on the side of the TV.

A menu for selecting the format of the files saved on the selected
Memory Card will be displayed.

remote control.

The saved file information is displayed as a folder or file.

Pressing the button over a photo icon shows the currently selected

Pressing the button over a folder icon shows the JPEG files included in the folder.
The Menu is displayed. Select the View option to display a photo in the aspect ratio.

When the Photo List screen is displayed:

• Moving to another photo may take a few seconds to load the file.

The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.

English-26

Using the Options Menu

"Slide Show":

Starts a slide show.

(Refer to “Selecting a Photo and Slide Show” on page 28)

"Rotate":

You can rotate images in full screen mode.
Images are rotated in the order of 90°, 180°, 270° and 0° (original state).

(Refer to “Rotating” on page 29)

You cannot save a rotated image.

"Zoom":

You can zoom into images in full screen mode.
Images are zoomed in on in the order of X2, X3, X4 and X1 (original size).

(Refer to “Zooming-in” on page 30)

You cannot save a zoomed-in on image.

"Copy", "Copy All files":

You can copy image files to a different memory card.

(Refer to “Copying Image Files” on page 31)

"Delete", " Delete All Files":

You can delete selected image files.

(Refer to “Deleting Image Files” on page 31)

"Print":

You can print image files directly with your printer.

(Refer to “Printing a Photo” on page 32)

"List":

Displays the stored files and folders and file info.

The “File Error” message appears on the screen in the following situations:

When the file actually has an error

•

If the target memory cannot be writtien to when copying files

•

If the target memory has not enough space when copying files

•

English-27

Viewing Photo File Information

When selecting a photo file, the photo file information is displayed on the left

in the TV screen, such as the resolution, the date modified and the order of the
file in the current directory.

Selecting a Photo and Slide Show

This menu shows JPEG files and folders saved on a memory card.

1. Complete Steps 1 to 4 of "Using the WISELINK Menu". (Refer to page 26)

2. Press the  or  button to select “Photo”, then press the ENTER/OK button.

The saved file information is displayed as a folder or file.

3. Press the INFO button.

4. Press the  or 

ENTER/OK button.

The Menu is displayed. Select the View option to display a photo in the aspect ratio.

• Slide Show all files in the selected folder at a predetermined interval.

•

During the Slide Show, files are displayed in order from the currently shown file.

5. Press the INFO button during “Slide Show” to set the option

("Speed", "Background Music, "Background Music Setting", "List").
Press the

6. To change the sub option, press the INFO button again to open the options

You can select these options

by simply pressing the WISELINK
button on the remote control.

window and select option you want to change, then press the ENTER/OK but­ton. Whenever you do this, the sub option on the screen is changed.

7. To exit WISELINK, press the WISELINK button on the remote control.

If the Slide Show feature is selected when a photo is displayed in full screen,

other photos are also in the full screen size during the Slide Show.

Such as the resolution
File size
Date modified
Order of the file in the current directory

button to select “Slide Show”, then press the

 or 

button to select the option, then press the

ENTER/OK

button.

Using the Menu during a Slide Show

Normal

"Speed":

Select to control the slide show speed.
Press the ENTER/OK button to select the option "Normal", "Slow", or "Fast".

When the Speed feature is set to the Fast option, usually it takes about 7 seconds to slide to the
next photo. The loading time may be longer depends on the size of the file.

On

"Background Music":

Select to determine whether to play an MP3 file during a slide show.
Press the ENTER/OK button to select the option "On" or "Off".

Set the Background Music Seetings first to use the “On” or “Off” function in this menu.

English-28