SAMSUNG LE40M71B User Manual [gr, hu, pl]
LCD TV
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Comment contacter Samsung dans le monde
Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez
contacter le Service Consommateurs Samsung.
Kontakt zu Samsung
Falls Sie Fragen oder Anregungen zu Samsung-Produkten haben, wenden Sie sich bitte an
den Samsung-Kundendienst.
Contact Samsung wereldwijd
Wanneer u suggesties of vragen heeft met betrekking tot Samsung producten, gelieve contact op te nemen met de consumenten dienst van Samsung.
Contacte con SAMSUNG WORLD-WIDE
Si tiene alguna pregunta o comentario referente a nuestros productos,
por favor contacte con nuestro Servicio de Atención al Cliente
Contacte SAMSUNG GLOBAL
Se tem algumas dúvidas ou comentários sobre os produtos Samsung,
contacte por favor a nossa linha de apoio a clientes Samsung.
Contatta SAMSUNG WORLD-WIDE
Se avete commenti o domande sui prodotti Samsung, contattate il
Servizio Clienti Samsung.
Country
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
RUSSIA
SLOVAKIA
SPAIN
SWEDEN
U.K
UKRAINE
Customer Care Center
02 201 2418
844 000 844
38 322 887
09 693 79 554
08 25 08 65 65 (€ 0,15/Min)
01805 - 121213 (€ 0,12/Min)
06 40 985 985
199 153 153
02 261 03 710
0900 20 200 88 (€ 0.10/Min)
231 627 22
0 801 801 881
80 8 200 128
8-800-200-0400
0850 123 989
902 10 11 30
08 585 367 87
0870 242 0303
8-800-502-0000
Web Site
www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
www.samsung.com/fr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.ru
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.com/ur
BN68-01047D-02
LE40M7
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
Elővigyázatosság az állóképek megjelenítésével kapcsolatban.
Az állóképek a TV-képernyő maradandó károsodását okozhatják.
• Ne jelenítsen meg állóképeket az LCD-képernyőn 2 órát meghaladó időn túl, mert ilyenkor a megjelenített képek a képernyő „beégését” okozhatják.
• Az LCD TV huzamosabb ideig tartó, 4:3 képarányú módban történő használata esetén a kibocsátott fényerősség eltérése miatt a képernyő
• Videojátékok vagy számítógépek állóképeinek bizonyos időt meghaladó megjelenítése következtében a képernyőn részleges utókép jelenhet meg.
Środki ostrożności, które należy zachować przy odtwarzaniu nieruchomych obrazów.
Nieruchomy obraz może spowodować trwałe uszkodzenie ekranu telewizyjnego.
• Nieruchomych obrazów nie należy wyświetlać na ekranie LCD dłużej niż przez 2 godziny, gdyż może to spowodować utrwalenie obrazu na ekranie.
• Oglądanie obrazu w formacie 4:3 na ekranie telewizora LCD przez długi okres czasu może powodować pozostawanie śladów krawędzi po środku
• Wyświetlanie nieruchomych obrazów z konsoli do gier lub komputera przez długi okres czasu może powodować powstawanie obrazu szczątkowego.
Aby zapobiec powstawaniu tego zjawiska, należy przy wyświetlaniu nieruchomych obrazów zmniejszyć ‘jasność’ oraz ‘kontrast’.
Προφυλάξεις για την προβολή ακίνητης εικόνας
Η προβολή ακίνητης εικόνας πιθανόν να προκαλέσει ανεπανόρθωτη ζημιά στην οθόνη της τηλεόρασης.
• Μην προβάλλετε μια ακίνητη εικόνα στην οθόνη LCD για περισσότερο από 2 ώρες, καθώς αυτό μπορεί να προκαλέσει διατήρηση της εικόνας.
•
• Η προβολή στατικών εικόνων από βιντεοπαιχνίδια και υπολογιστές για μεγαλύτερο χρονικό διάστημα από το καθορισμένο, ενδέχεται να προκαλέσει μερικώς
Предпазни мерки при показване на неподвижен образ
Неподвижният образ може да доведе до перманентна повреда на екрана на телевизора.
• Не показвайте неподвижен образ на течнокристалния екран за повече от часа, тъй к ато това може да доведе до запазване на образа.
• Гледането на течнокристалния телевизор във формат 4:3 за продължителен период от време може да остави следи или рамки, показвани
• Показването на неподвижни образи на видео игри и компютър за по-дълъг период от време може да доведе до частични остатъчни изображения.
Bezpečnostné opatrenia pri zobrazení statického obrazu
Statický obraz môže spôsobiť trvalé poškodenie televíznej obrazovky.
• Statický obraz nezobrazujte na LCD paneli dlhšie ako 2 hodiny, pretože môže spôsobiť retenciu obrazu na obrazovke.
• Sledovanie LCD TV vo formáte 4:3 po dlhšiu dobu môže zanechať vľavo, vpravo a v strede obrazovky stopy po okrajoch, spôsobené
• Zobrazenie statických obrázkov z videohier a PC dlhšie ako určitý čas, môže vytvárať čiastočné pretrvávajúce obrazy.
Mjere opreza pri prikazivanju fotografije
Fotografija može uzrokovati trajna oštećenja na TV zaslonu.
• Ne prikazujte fotografiju na LCD zaslonu dulje od 2 sata jer to može uzrokovati zadržavanje slike na zaslonu.
• Gledanje LCD televizora u formatu 4:3 u dužem vremenskom periodu može dovesti do prikazivanja tragova obruba na lijevoj i desnoj strani
• Prikazivanje fotografija iz video igrica i računala u duljem vremenskom periodu od predvi?enog može dovesti do parcijalnih zaostalih slika.
Opatření při zobrazení statického obrazu
Statický obraz může způsobit trvalé poškození obrazovky televizoru.
• Neponechávejte statický obraz na panelu LCD po dobu delší než 2 hodiny, mohlo by dojít ke zhoršení obrazu.
• Sledování televizoru LCD při formátu zobrazení 4:3 po dlouhou dobu může na pravém a levém okraji a ve středu obrazovky zanechat stopy
• Zobrazení statického obrazu z videoher a PC po delší dobu může způsobit částečný efekt „afterimage“.
by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by
the above effect are not covered by the Warranty.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
Ezt a jelenséget „képernyőbeégésnek” is nevezik.
A képernyőbeégés elkerülése érdekében állókép megjelenítésekor csökkentse a kép fényerejét és kontrasztját.
közepén, valamint bal és jobb oldalán sávok alakulhatnak ki. DVD-filmek lejátszása és játékprogramok használata is hasonló jelenséget
okozhat. A garancia az ilyen esetekben keletkezett károkra nem terjed ki.
A jelenség megelőzése érdekében állóképek megjelenítése esetén csökkentse a fényerőt és kontrasztot.
Zjawisko utrwalania obrazu określa się także mianem „wypalania ekranu”.
Aby uniknąć tego zjawiska, należy przy wyświetlaniu nieruchomych obrazów zmniejszyć jasność oraz kontrast ekranu.
ekranu oraz po jego lewej i prawej stronie. Przyczyną tego zjawiska jest różnica w natężeniu emitowanego światła. Odtwarzanie płyty DVD lub
wyświetlanie obrazu z konsoli do gier może powodować powstawanie podobnego zjawiska. Wymienione powyżej objawy nie są objęte gwarancją.
Αυτή η διατήρηση της εικόνας είναι γνωστή ως “κάψιμο της οθόνης”.
Για να αποφύγετε τη διατήρηση της εικόνας, μειώστε τη φωτεινότητα και την αντίθεση της οθόνης όταν προβάλλετε στατικές εικόνες.
Η χρήση της τηλεόρασης πλάσματος σε μορφή 4:3 για παρατεταμένο χρονικό διάστημα μπορεί να οδηγήσει στην εμφάνιση αχνών περιγραμμάτων στα αριστερά,
στα δεξιά και στο κέντρο της οθόνης, λόγω διαφοράς στην εκπομπή φωτός στην οθόνη. Η αναπαραγωγή ενός δίσκου DVD ή η σύνδεση μιας κονσόλας
παιχνιδιών ενδέχεται να προκαλέσει το ίδιο φαινόμενο στην οθόνη. Οι βλάβες που προκαλούνται από το παραπάνω φαινόμενο δεν καλύπτονται από την εγγύηση.
εντυπωμένα είδωλα. Για να αποφύγετε αυτό το φαινόμενο, μειώστε τη φωτεινότητα και την αντίθεση όταν προβάλλετε στατικές εικόνες.
Това запазване на образа се нарича още “прогаряне на екрана”.
За да избегнете такова запазване на образа, намалете яркостта и контраста на екрана, когато показвате неподвижен образ.
отляво, отдясно и в центъра на екрана, предизвикани от разликата в светлинното излъчване на екрана. Изпълнение на DVD или игрова
конзола може да предизвика подобен ефект върху екрана. Повреди, предизвикани от горния ефект, не се покриват от Гаранцията.
За да се предотврати този ефект, намалете яркостта и контраста на екрана, когато показвате неподвижен образ.
Táto retencia obrazu je známa aj ako “vypálenie obrazovky”.
Aby ste zabránili takejto retencii obrazu, pri zobrazovaní statických obrázkov znížte stupeň jasu a kontrastu obrazovky.
rozdielnym vyžarovaním svetla na obrazovke. Prehrávanie DVD alebo hranie hier môže na obrazovke spôsobiť podobný efekt. Poškodenia,
spôsobené vyššie uvedeným efektom, nie sú chránené zárukou.
Aby ste predišli takémuto efektu, počas zobrazenia statických obrázkov znížte “jas” a “kontrast”.
Ovo zadržavanje slike je poznato i kao “efekt izgaranja zaslona”.
Kako biste izbjegli zadržavanje slike, smanjite stupanj svjetline i kontrasta zaslona tijekom prikazivanja fotografije.
te središtu zaslona uzrokovanog razlikom emitiranja svjetla na zaslonu. Reprodukcija DVD-a ili igranje s igraćom konzolom može uzrokovati
sličan efekt na zaslonu. Pogreške uzrokovane gore navedenim efektom nisu pokrivene jamstvom.
Kako bi to spriječili, smanjite ‘svjetlinu’ i ‘kontrast’ kod prikazivanja fotografija.
Toto zhoršení obrazovky se také označuje jako „vypálení obrazovky“.
Abyste zhoršení obrazu předešli, snižte při zobrazení statického obrazu nastavení jasu a kontrastu.
po okrajích způsobené rozdíly ve vyzařování světla. Podobný efekt může na obrazovce zanechat přehrávání DVD nebo používání herní
konzole. Na poškození způsobené výše uvedeným efektem se nevztahuje záruka.
Tomuto efektu lze předejít snížením jasu a kontrastu při zobrazování statického obrazu.
© 2006 Samsung Electronics Co., Ltd. All rights reserved.
Contents
English
English
CONNECTING AND PR EPARI NG YOUR TV
List of Parts....................................................................................... 2
Installing the Wall Mount Kit ................................................ 2
Viewing the Control Panel ......................................................... 3
Viewing the Connection Panel ................................................. 4
Viewing the Remote Control ..................................................... 6
Installing Batteries in the Remote Control ........................... 6
Switching On and Off .................................................................. 7
Placing Your Television in Standby Mode ............................. 7
Plug & Play ....................................................................................... 7
SETT ING THE CHANNELS
Storing Channels Automatically .............................................. 8
Storing Channels Manually ........................................................ 8
Setting the Channel Manager .................................................. 9
Activating the Child Lock ...................................................... 10
Sorting the Stored Channels ..................................................... 10
Assigning Channels Names ....................................................... 11
Fine Tuning Channel Reception ............................................... 11
SETT ING THE PICTURE
Using the LNA (Low Noise Amplifier) Feature .................... 12
Changing the Picture Standard ................................................ 12
Adjusting the Custom Picture................................................... 12
Changing the Colour Tone ......................................................... 13
Adjusting the Color Tone with the Preferred
Color Component .......................................................................... 13
Resetting the Picture Settings to the
Factory Defaults ............................................................................. 14
Changing the Picture Size .......................................................... 14
Changing the Auto Wide (4:3) .................................................. 14
Freezing the Current Picture ..................................................... 15
Digital Noise Reduction .............................................................. 15
DNIe Demo (Digital Natural Image engine) ........................ 15
Changing the Colour Space....................................................... 16
Changing the LCD 100Hz ........................................................... 16
Viewing the Picture In Picture (PIP) ........................................ 17
SETT ING THE SOUND
Changing the Sound Standard ........................................... 18
Adjusting the Sound Settings ............................................. 18
Setting the TruSurround XT (SRS TSXT) ........................... 18
Adjusting the Volume Automatically ................................ 19
Selecting the Internal Mute .................................................. 19
Listening to the Sound of the Sub Picture...................... 19
Resetting the Sound Settings to the
Factory Defaults ........................................................................ 20
Connecting Headphones ...................................................... 20
Selecting the Sound Mode ................................................... 20
SETT ING THE OTHERS
Choosing Your Language ...................................................... 22
Using Game Mode ................................................................... 22
Setting the Blue Screen Mode /
S electing the Melody ............................................................. 23
Using the Energy Saving Feature ....................................... 23
Setting the Blue Eye ................................................................ 23
Selecting the Source ............................................................... 24
Editing the Input Source Names ........................................ 24
WISELINK
Using the WISELINK Function .............................................. 25
Using the WISELINK Menu .................................................... 26
Using the PHOTO (JPEG) List ................................................ 26
Viewing Photo File Information .......................................... 28
Selecting a Photo and Slide Show ..................................... 28
Rotating ....................................................................................... 29
Zooming-in ................................................................................. 30
Copying Image Files ................................................................ 31
Deleting Image Files................................................................ 31
Printing a Photo ........................................................................ 32
Using the MP3 List ................................................................... 32
Copying Music Files ................................................................. 33
Deleting Music Files ................................................................ 33
Using the Setup Menu ........................................................... 34
USING THE TELETEXT FEATURE
Teletext Decoder ...................................................................... 35
Displaying the Teletext Information .................................. 35
Selecting a Specific Teletext Page ...................................... 36
Using Fastext to Select a Teletext Page ............................ 36
Setting Up Your Remote Control ........................................ 37
Remote Control Codes ........................................................... 39
SETT ING THE PC
Setting up Your PC Software
(Based on Windows XP) ......................................................... 42
Display Modes ........................................................................... 42
Setting the PC ............................................................................ 43
RECOMME NDATION S FOR USE
Using the Anti-Theft Kensington Lock ............................. 44
Troubleshooting:
Before Contacting Service Personnel ............................... 44
Technical and Environmental Specifications ................ 45
SETT ING THE TIME
Setting and Displaying the Current Time ........................ 20
Setting the Sleep Timer.......................................................... 21
Switching the Television
On and Off Automatically ..................................................... 21
Symbol Press Important Note One-Touch
Button
English-1
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control & Batteries
(AAA x 2)
Owner’s Instructions
Warranty card / Service Network Card / Safety Guide / Registration Cards (Not available in all locations)
Warranty card
Power Cord Cover-Bottom Cleaning Cloth
Service Network Card
Safety Guide Registration Cards
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage to
the product or injury to yourself or others
if you elect to install the TV on your own.
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
English-2
Viewing the Control Panel
The product colour and shape may var y depending on the model.
SOURCE
Toggles between all the available input sources
(TV, Ext.1, Ext.2, AV, S-Video, Component, PC,
HDMI1, HDMI2). In the on-screen menu,
use this button as you use the ENTER button
on the remote control.
MENU
Press to see an on-screen menu of
your TV’s features.
Press to decrease or increase the volume.
In the on-screen menu, use the buttons
as you use the 3 and 4 buttons on the remote
control.
Press to change channels.
In the on-screen menu, use the
as you use the and 5 buttons on the remote
control. (Without the Remote Control, you can turn
on the TV by using the Channel buttons.)
Speakers
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and lights
up in stand-by mode.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
English-3
(
Power)
buttons
Viewing the Connection Panel
[Rear Panel Jacks]
Power Input
Whenever you connect an external device to your T V, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
[Side Panel Jacks]
English-4
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial / A cable television network / A satellite net work
Connecting HDMI/DVI
-
Supports connections between HDMI-connec tion-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs).
- No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
- “High Definition Multimedia inter face” allows the transmission of high definition digital video data and multiple
channels of digital audio ( 5.1 channels).
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R - AUDIO - L” terminal
on DVI for sound output.
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that
it has been set to a compatible video output mode as shown in the table below.
Failure to obser ve this may result in picture distortion, image breakup or no picture.
Supported modes for DVI or HDMI
- Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card.
(This will result in a blank screen being displayed)
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD)
and connect the VCR (or DVD) to your set.
- Connec t RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out
connectors on the A/V device.
- Headphone may be connected to the headphone output ( ) on the rear of your set.
While the headphone is connected, the sound from the built-in speakers will be disabled.
connectors on the Amplifier or DVD Home Theater.
- Connec t the stereo audio cable (optional) to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the
sound card on your computer.
ends to corresponding component video out connectors on the DTV or DVD.
- I f you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)
and connect the DTV (or DVD) to component connector (“PR”, “PB”, “Y”) on your set.
-
- Connec t RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio
out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
- If you want to use a locking device, contact the dealer where you purchased the T V.
-
50 Hz
60 Hz
Component
Connecting Set-Top Box, VCR or DVD
-
Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.
Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
SERVICE
- Service connection for qualified service engineer.
Connecting AUDIO
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio in
Connecting Computer
-
Connect the D- Sub cable (optional) to “PC (PC IN)” on the rear of your set and the other end to the Video Card of your computer.
Connecting Component Devices (DTV/DVD)
- Connect component video cables (optional) to component connector (“PR”, “PB”, “Y”) on the rear of your set and the other
The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.
480i
X
X
O
480p
O
O
O
576i
X
X
O
576p
O
X
O
720p
O
O
O
The place of the Kensington Lock may be different depending on its model.
1080i
O
O
O
English-5
Viewing the Remote Control
Selec ts a target device to be
controlled by the Samsung remote
control
(TV, DVD, STB, CABLE, VCR)
(Refer to page 37~41)
Television Standby button
Number buttons for direct
channel access
One/Two-digit channel selection
I t display "Channel Manager"
on the screen.
Selects the TV mode directly
VCR/DVD Functions
Rewind, Stop, Play/Pause,
Fast/Forward
Volume increase
Volume decrease
Temporary sound switch-off
Menu display and
change confirmation
Picture-In-Picture On / Off
Picture effect selection
Sound effect selection
Sound mode selection
SRS TSXT selection
SET: Adjusts 5 separate devices - TV,
DVD, STB, CABLE, or VCR.
RESET: When your remote does not
work, change the batteries and press
the “RESET” button for 2-3 seconds
before use.
Available source selection
When pressing this button, a number of
buttons on the remote control (e.g.
Selects a target device, volume, channel and
MUTE buttons) light up for a few seconds
and then turn off to save power. This function
is to conveniently use the remote control at
night or when dark.
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired,
and has Braille points on the Power, Channel and Volume buttons.
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a
long time. The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
English-6
Previous channel
Automatic Power-off
This function enables you to load saved
photo (JPEG) and audio files (MP3)
and to view or play them on the TV.
P : Next channel
P : Previous channel
Exit the OSD
Control the cursor in the menu
Use to see information on the
current broadcast
Picture size selection
Selects the PC mode directly
Picture freeze
Input source selection
Teletext Functions
Exit from the teletext display
Teletext index
Teletext hold
Teletext size selection
Teletext store
Teletext mode selection (LIST/FLOF)
Teletext sub page
P : Teletext next page
P : Teletext previous page
Teletext cancel
Teletext reveal
Alternately select Teletext, Double, or Mix.
Fastext topic selection
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2. Press the button on the front of the set.
You also can press the POWER button or the
The programme that you were watching last is reselected automatically.
TV
( ) button on the remote control to turn the T V on.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on the right side of the set.
When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.
4. To switch your set off, press the POWER button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to re duce the power consumption. The standby mode can be useful
when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
The screen is turned off and a red standby indicator appears on the front of your set.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9) or channel
up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial.
Plug & Play
When the TV is initially powered on, several basic settings proceed
automatically and subsequently. The following settings are available.
1. Press the POWER button on the remote control.
The message “Start Plug & Play” is displayed with “OK” selected.
2. Select the appropriate language by pressing the 5 or button.
Press the ENTER button to confirm your choice.
3. The message “Check antenna input.” is displayed with “OK” selected.
Press the ENTER button.
Please check that the antenna cable is connected correctly.
4. Select the appropriate country by pressing the 5 or button.
Press the ENTER button to confirm your choice.
5. The “Auto Store” menu is displayed with the “Start” selected.
Press the ENTER button.
The channel search will start and end automatically.
After all the available channels are stored, the “Clock Set” menu appears.
Press the
ENTER
6. Press the ENTER button.
Select the “Hour” or “Minute” by pressing the
Set the “Hour” or “Minute” by pressing the
You can also set the hour and minute by pressing the number buttons on the remote control.
7. Press the ENTER button to confirm your setting.
Language: Select your language.
Country: Select your country.
Auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
button at any time to interrupt the memorization process.
3 or 4
5 or
button.
English-7
button.
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the 5 or
2. Press the ENTER button again, to select “Plug & Play”.
3. The message to “Start Plug & Play” is displayed.
button
to select “Setup”, then press the
ENTER
button.
- Storing Channels Automatically
- Storing Channels Manually
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically
allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the 5 or button to select “Channel”, then press the ENTER button.
2. Press the ENTER button to select “Country”.
3. Select the appropriate country by pressing the 5 or button.
Press the ENTER button to confirm your choice.
4. Press the 5 or button to select “Auto Store”, then press the ENTER button.
5. Press the ENTER button.
The TV will begin memorizing all of the available channels.
Press the
ENTER
button at any time to interrupt the memorization process and return to the “Channel” menu.
6. After all the available channels are stored, the “Sort” menu appears.
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the MENU button to display the menu.
Press the 5 or button to select “Channel”, then press the ENTER button.
2. Press the 5 or button to select “Manual Store”, then press the ENTER button.
3. Press the ENTER button to select “Programme”.
4. To assign a programme number to a channel, find the correct number by pressing the 5 or button
and then press the ENTER button.
You can also set a programme number by pressing number buttons on the remote control.
English-8
5. Press the 5 or button to select “Colour System”, then press the ENTER button.
6. Select the colour standard required by pressing the 5 or button then, press the ENTER button.
7. Press the 5 or button to select “Sound System”, then press the ENTER button.
8. Select the sound standard required by pressing the 5 or button, then press the ENTER button.
If there is an abnormal sound or no sound, re-select the sound system required.
9.
If you know the number of the channel to be stored, press the 5 or button to select “Channel”. Press the ENTER button.
Select C (Air channel) or S (Cable channel) by pressing the 5 or button. Press the 4 button to select channel.
Select the required number by pressing the 5 or button and then press the ENTER button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the 5 or button to select “Search”.
Press the ENTER button. Search by pressing the 5 or button and then press the ENTER button.
11. Press the 5 or button to select “Store”. Press the ENTER button to select “OK”.
12. Repeat steps 3 to 11 for each channel to be stored.
Programme: Selects a program number for the channel.
Colour System: Sets the colour supporting system.
Sound System: Sets the sound suppor ting system.
Setting the Channel Manager
Set the channels according to your preference.
You can easily delete, add, or lock the channel you want.
1. Press the MENU button to display the menu. Press the 5 or button
to select “Channel”, then press the ENTER button.
2.
Press the 5 or button to select “Channel Manager”,
then press the ENTER button.
3.
Press the ENTER button again, to select “Channel Manager”.
4. Press the 4 button to select “ ” line.
5. Press the 5 or button to select the undesired channel,
then press the ENTER button to cancel.
6. Repeat steps 5 for each channel to be selected or canceled
7. Press the EXIT button to exit.
“ ”
is active when “Child Lock” is selected to “On”.
You can select these options by
simply pressing the CH MGR button on the remote control.
Channel: Selects a channel.
Search: Scans for the frequency value for the channel.
Store: Saves your settings.
English-9
Activating the Child Lock
This feature allows you to prevent unauthorized users, such as children, from
watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using the buttons on the side.
Only the remote control can release the Child Lock setting, so keep the remote
control away from children.
1. Press the MENU button to display the menu. Press the 5 or button
to select “Channel”, then press the ENTER button.
2.
then press the ENTER button.
3.
then press the ENTER button.
4.
5.
then press the ENTER button.
6. Press the 4 button to select “ ” line.
7. Press the 5 or button to select the channels you want to lock,
then press the ENTER button.
8. Repeat steps 7 for each channel to be locked or unlocked.
9. Press the EXIT button to exit.
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
automatically stored.
1. Press the MENU button to display the menu. Press the 5 or button
to select “Channel”, then press the ENTER button.
2.
3.
5 or button repeatedly. Press the ENTER button.
4.
5.
6. Press the EXIT button to exit.
Press the 5 or button to select “Channel Manager”,
Press the 5 or button to select “Child Lock”,
Press the 5 or button to select “On”. Press the
ENTER
button.
Press the 5 or button to select “Channel Manager”,
S elect “On” or “Off ” in “Child Lock” to easily turn the channels which
selec ted on
“ ”
to be active or inac tive.
Modify the numeric order in which the channels have been
Give easily remembered numbers to the channels that you watch
most often.
Press the 5 or button to select “Sort”, then press the
ENTER
Select channel number that you wish to change by pressing the
The selected channel number and name are moved to right side.
Press the
5 or
and then press the
The selected channel is exchanged with the one previously stored to the chosen
number.
button to move to the position in which you would like to change
ENTER
button.
Repeat steps 3 to 4 for another channel to be sorted.
button.
English-10
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast.
These names can be changed, allowing you to assign new names.
1. Press the MENU button to display the menu. Press the 5 or button
to select “Channel”, then press the ENTER button.
2.
Press the 5 or button to select “Name”, then press the
3.
If necessary, select the channel to be assigned to a new name by
pressing the
4.
5.
Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for optimal reception.
1. Use the number buttons to directly select the channel that
you want to fine tune.
2. Press the MENU button to display the menu.
Press the 5 or button to select “Channel”,
then press the ENTER button.
3. Press the 5 or button to select “Fine Tune”,
then press the ENTER button.
4. Press the 3 or 4 button to adjust the fine tuning.
Press the
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand
side of the channel number in the channel banner. And the channel number turns red.
To reset the fine-tuning, select “Reset” by pressing the 5 or button and then press the
ENTER button.
ENTER
button.
5 or
The selection bar is displayed around the name box.
To...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
The characters available are :
Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)
ENTER
button. Press the ENTER button.
Then...
Press the
Press the 4 button
Press the 3 button
Press the ENTER button
button.
5 or
button
English-11
Using the LNA (Low Noise Amplifier) Feature
This function is very useful in the situation that the TV is used in a weak
signal area. LNA amplifies the TV signal in the weak signal area, a low-noise
preamplifier boosts the incoming signal.
1. Press the MENU button to display the menu.
Press the 5 or button to select “Channel”, then press the ENTER button.
2.
Press the 5 or button to select “LNA”, then press the ENTER button.
3.
Select “Off“ or “On“ by pressing the 5 or button.
Press the ENTER button.
4.
Press the EXIT button to exit.
If the picture is noisy with the LNA set to On, select Off.
LNA setting must be set for each individual channel.
Changing the Picture Standard
You can select the type of picture which b est corresponds to your viewing
requirements.
1. Press the MENU button to display the menu. Press the 5 or
button to select “Picture”, then press the ENTER button.
2.
Press the ENTER button again, to select “Mode”.
Press the ENTER button again.
3.
Press the
5 or
button to select the desired picture effect.
ENTER
button.
You can also press the
P.MODE button on the remote
control to select one of the
picture settings.
Press the
4.
Press the EXIT button to exit.
Dynamic: Selects the picture for high-definition in a bright room.
Standard: Selects the picture for optimum display in a normal environment.
Movie: Selects the picture for comfortable display in a dark room.
Custom: Select to view your favorite display settings.
(Refer to “Adjusting the Custom Picture”)
The Picture mode must be adjusted separately for each input source.
You can return to the factory defaults picture settings by selecting the “Reset”.
(Refer to “Resetting the Picture Settings to the Factory Defaults” on page 14)
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1. To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 4.
2.
Press the
Press the
3.
Press the
particular item.
4.
Press the EXIT button to exit.
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objec ts to either sharpen them or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
Tint (NTSC only):
The adjusted values are stored according to the selected Picture mode.
I n PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted
5 or button
ENTER
3 or 4 button
to select a particular item.
button.
to decrease or increase the value of a
Press the ENTER button.
Adjusts the colour of objects, mak ing them more red or green for a more natural look.
English-12
Changing the Colour Tone
You can select the most comfortable colour tone to your eyes.
1. To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 4 on page 12.
2.
Press the 5 or button to select “Colour Tone”, then press the ENTER button.
3.
Press the
5 or button
Press the
ENTER
4.
Press the EXIT button to exit.
Cool2: Makes the colour temperature bluer
than “Cool1” menu.
Cool1: Makes whites bluish.
Normal: Keeps whites white.
The adjusted values are stored according to the selected Picture mode.
to select the desired colour tone setting.
button.
Warm1: Makes whites reddish.
Warm2: Makes the colour temperature
Adjusting the Color Tone with the Preferred Color Component
You can adjust a picture’s color tone with your preferred color component.
1. To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 4 on page 12.
2.
Press the 5 or button to select “Colour Manager”,
then press the ENTER button.
3.
Press the
5 or button
Press the
ENTER
4.
Press the
3 or 4 button
particular item.
5.
Press the EXIT button to exit.
R Contrast:
G Contrast:
B Contrast:
R Brightness:
G Brightness:
B Brightness:
Reset:
Lightens or intensifies the red component of the border between objects and
the background.
Lightens or intensifies the green component of the border between objects
and the background.
Lightens or intensifies the blue component of the border between objects and
the background.
Adjusts the brightness of the red component for the entire screen.
Adjusts the brightness of the green component for the entire screen.
Adjusts the brightness of the blue component for the entire screen.
Resets all settings to the defaults.
to select a particular item.
button.
to decrease or increase the value of a
Press the ENTER button.
redder than “Warm1” menu.
You cannot select a "Colour Tone" in the "Colour Manager".
English-13
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 4 on page 12.
2. Press the 5 or button to select “Reset”, then press the
ENTER button.
3.
Press the EXIT button to exit.
The “Reset” will be set for each picture mode.
Changing the Picture Size
You can select the picture size which best corresponds to your
viewing requirements.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Picture”, then press the ENTER button.
2. Press the 5 or button to select “Size”, then press
the ENTER button.
3. Select the required option by pressing the 5 or button.
Press the
You can select these options
by simply pressing the P.SIZE
button on the remote control.
ENTER
4.
Press the EXIT button to exit.
Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
WIDE 4:3 : Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
“Auto Wide” function is available only in "T V", "Ext1", "Ext2", "AV", and "S -Video" mode.
In PC Mode, only “16:9” and “4:3” mode can be adjusted.
Zoom : Select by pressing the 3 or 4 buttons. Use the 5 or button to move the
picture up and down. After selecting , use the 5 or button to magnify or
reduce the picture size in the ver tical direction.
WIDE 4:3 : Move the screen up/down using the 5 or button after selecting the
by pressing the 4 or ENTER button.
button.
Changing the Auto Wide (4:3)
Ajusts the display picture size to 4:3 appropriate for input signal
1. Press the MENU button to display the menu. Press the 5 or button to
select “Picture”, then press the ENTER button.
2. Press the 5 or button to select “Auto Wide (4:3)”, then press the
ENTER button.
3. Select the required option by pressing the 5 or button.
4.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
WIDE 4:3 : Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
Press the
ENTER
button.
Press the EXIT button to exit.
These functions don’t work in PC mode.
English-14
Freezing the Current Picture
Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.
Digital Noise Reduction
If the broadcast signal received by your T V is weak, you can activate the Digital
Noise Reduction feature to help re duce any static and ghosting that may appear
on the screen.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Picture”, then press the ENTER button.
2. Press the 5 or button to select “Digital NR”, then press the
ENTER button.
3.
Press the 5 or button to select “On” or “Off”. Press the
4. Press the EXIT button to exit.
DNIe Demo (Digital Natural Image engine)
Samsung’s new technology brings you more detailed images with
contrast and white enhancement. A new image compensation algorithm gives
viewers brighter and clearer images. DNIe technology will match every signal to
your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode
to On.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Picture”, then press the ENTER button.
2. Press the 5 or button to select “DNIe Demo”, then press the
ENTER button.
3.
Press the 5 or button to select “On” or “Off”. Press the
4. Press the EXIT button to exit.
These functions don’t work in PC mode.
The DNle Demo is designed to show the difference between the regular and
DNIe pictures.
By default, the product displays the picture with DNle applied.
ENTER
ENTER
button.
button.
English-15
Changing the Colour Space
Colour space is a colour matrix composed of red, green, and blue colours. Select
your favorite colour space and experience the world of na tural colour.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Picture”, then press the ENTER button.
2. Press the 5 or button to select “Colour Space”, then press the
ENTER button.
3.
4. Press the EXIT button to exit.
Changing the LCD 100Hz
You can experience more natural pictures and clearer texts without motion blur
even in fast moving scenes.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Picture”, then press the ENTER button.
2. Press the 5 or button to select “LCD 100Hz ”, then press the
ENTER button.
3.
4. Press the EXIT button to exit.
Press the 5 or button to select “Wide” or “Auto”.
Press the
ENTER
button.
Wide : Wide Colour Space offers deep and rich colour tone.
Auto : Auto Colour Space automatically adjusts to natural colour tone based on program
sources.
Press the 5 or button to select “On” or “Off”. Press the
ENTER
button.
English-16
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main pic ture of set
programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main
picture.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Picture”, then press the ENTER button.
2.
Press the 5 or button to select “PIP”, then press the
3. Press the ENTER button again.
Press the 5 or button to select “On”, then press ENTER button.
If the PIP is activated, the size of the main picture turns to “16:9”.
4. Press the 5 or button to select “Source”,
Press the PIP button on the
remote control repeatedly to activate or deactivate the “PIP”.
then press ENTER button. Select a source of the sub picture by
pressing the 5 or button and press the ENTER button.
The sub picture can serve different source selections based on what the main picture is set to.
5. Press the 5 or button to select “Swap”.
To interchange the main picture and the sub picture, select “Swap” option and
press the ENTER button.
The main picture and the sub picture are interchanged.
I
f main picture is in “PC” mode, “Swap” is not available.
6. Press the 5 or button to select “Size” of the sub picture and then
press the ENTER button. Select a size of the sub picture by
pressing the 5 or button and then press the ENTER button.
If main picture is in “PC” mode, “Size” is not available.
7. Press the 5 or button to select “Position”, then press the ENTER
button. Select the position of the sub picture by pressing the 5 or
button and then press the ENTER button.
8. Press the 5 or button to select “Programme” and then press the ENTER
button. You can select the channel that you want to view through sub picture
by pressing the 5 or button.
Press the ENTER button.
The “Programme” can be active when the sub picture is set to TV.
9. Press the EXIT button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use
the main screen to view a game or karaoke.
Source: Used to select a source of the sub picture.
Swap: Used to interchange the main picture and the
sub picture.
PIP S ettings
Sub
TV
Ext.1
Ext.2
AV
S-Video
Component
PC
HDMI1
HDMI2
TV
X
X
X
X
X
X
O
O
O
Main
(O: PIP operates, X: PIP doesn’t operate)
Ext.1
Ext.2
X
X
X
X
X
X
X
X
X
X
X
X
O
O
O
O
O
O
ENTER
Size: Used to select a size of the sub picture.
Position: Used to move the sub picture.
Programme: Used to Change the sub pic ture.
AV
S-Video
X
X
X
X
X
X
O
O
O
Component
X
X
X
X
X
X
X
O
O
PC
X
X
X
X
X
X
X
O
O
button.
HDMI1
X
X
X
X
X
X
X
X
X
HDMI2
O
O
O
O
O
O
O
O
O
O
O
O
X
X
X
X
X
X
English-17
Changing the Sound Standard
You can select the type of the special sound effect to be used when watching a
given broadcast.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Sound”, then press the ENTER button.
2. Press the ENTER button again, to select “Mode”.
3. Select the required sound effect by pressing the 5 or button repeatedly
and then press the ENTER button.
4. Press the EXIT button to exit.
You can also select these options by
simply pressing the S.MODE button
on the remote control.
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides live and full sound for movies.
Speech: Emphasizes voices over other sounds.
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Sound”, then press the ENTER button.
2. Press the 5 or button to select “Equalizer”, then press the
ENTER button.
3.
Press the
Press the
4. Press the 5 or button to reach the required setting.
Press the ENTER button.
5. Press the EXIT button to exit.
If you make any changes to these settings, the Sound Mode is automatically switched to
“Custom”.
3 or 4 button
ENTER
button.
Custom: Selects your custom sound settings.
(Refer to “Adjusting the Sound Settings”)
to select a particular item.
Setting the TruSurround XT (SRS TSXT)
TruSurround XT is a patented SRS technology that solves the problem of playing
5.1 multichannel content over two speakers.
TruSurround delivers a compelling,virtual surround sound experience through any
two-speaker playback systems, including internal television speakers. It is fully
compatible with all multichannel formats.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Sound”, then press the ENTER button.
2. Press the 5 or button to select “SRS TSXT”, then press the
ENTER button.
3.
Press the 5 or button to select “On” or “Off”. Press the
You can also set these options
simply by pressing the SRS button on remote control.
4. Press the EXIT button to exit.
TruSurround XT, SRS and symbol are trademarks of
SRS Labs, Inc. TruSurround XT technology is incorporated under license
from SRS Labs, Inc.
English-18
ENTER
button.
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and so it is not easy for
you to adjust the volume every time the channel is changed.
This feature allows you to automatically adjust the volume of the desired channel
by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Sound”, then press the ENTER button.
2. Press the 5 or button to select “Auto Volume”, then press the
ENTER button.
3.
Press the 5 or button to select “On” or “Off”. Press the
4. Press the EXIT button to exit.
Selecting the Internal Mute
If you want to hear the sound through separate speakers, cancel the internal
amplifier.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Sound”, then press the ENTER button.
2. Press the 5 or button to select “Internal Mute”, then press the
ENTER button.
3.
Press the 5 or button to select “On” or “Off”. Press the
4. Press the EXIT button to exit.
When “Internal Mute” is set to “On’, the Sound menus except for
“Sound Select” (in PIP mode) cannot be adjusted.
ENTER
ENTER
button.
button.
Listening to the Sound of the Sub Picture
During the PIP features ac tivation, you can listen to the sound of the sub picture.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Sound”, then press the ENTER button.
2. Press the 5 or button to select “Sound Select”, then press the
ENTER button.
3. Press the 5 or button to select “Sub”. Press the ENTER button.
4. Press the EXIT button to exit.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
You can select this option when the “PIP” is set to “On”.
English-19
Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset
function after setting the equalizer resets the equalizer setting to the factory
defaults.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Sound”, then press the ENTER button.
2. Press the 5 or button to select “Reset”,
then press the ENTER button.
3. Press the EXIT button to exit.
You can select this option when the “Game Mode” is set to “On”.
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port,
you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu.
(Refer to “Selecting the Internal Mute” on page 19)
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
Selecting the Sound Mode
You can set the sound mode by pressing the “DUAL” button.
When you press it, the current sound mode is displayed on the screen.
Audio Type
You can also set these options
simply by pressing the DUAL button on remote control.
FM
Stereo
NICAM
Stereo
Mono
Stereo
Dual
Mono
Stereo
Dual
DUAL 1/2
MONO
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
Default
Automatic
change
DUAL 1
Automatic
change
DUAL 1
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is displayed when you press
the INFO button. You must also set the time if you wish to use the automatic
On/Off timers.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Setup”, then press the ENTER button.
2.
Press the 5 or button to select “Time”, then press the
3. Press the ENTER button to select “Clock Set”.
4.
To...
Move to “Hour” or “Minute”
Set the “Hour” or “Minute”
Press the ENTER button.
5. Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
English-20
ENTER
Press the...
3 or 4 button.
5 or button.
button.
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Setup”, then press the ENTER button.
2.
Press the 5 or button to select “Time”, then press the
3. Press the 5 or button to select “Sleep Timer”, then press the
ENTER button.
4. Press the 5 or button repeatedly until the desired time appears
(Off, 30, 60, 90, 120, 150, 180). Press the ENTER button.
Press the SLEEP button on the
remote control repeatedly until
the appropriate time interval
appears.
5. Press the EXIT button to exit.
The T V automatically switches to standby mode when the timer reaches 0.
Switching the Television On and Off Automatically
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your choice at
the time you select.
Switch off automatically at the time you selec t.
The first step is to set the television’s clock.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Setup”, then press the ENTER button.
2. Press the 5 or button to select “Time”, then press the
ENTER button.
3. Press the 5 or button to select “On Timer”, then press the
ENTER button.
4. Press the 5 or button to adjust “Hour”, then press the 4 button to
move to the next step. Set other items using the same method as above.
When finished, press the ENTER button to return.
5. Press the 5 or button to select “Off Timer”,
then press the ENTER button.
6. Press the 5 or button to adjust “Hour”, then press the 4 button to
move to the next step. Set other items using the same method as above.
When finished, press the ENTER button to return.
7. Press the EXIT button to exit.
You can also set hour and minute by pressing the number buttons on the remote control.
The "Activation" setting must be set to "Yes" in order for the timers to work .
ENTER
button.
English-21
Choosing Your Language
Using Game Mode
When you start using your set for the first time, you must select the
language which will be used for displaying menus and indications.
1. Press the MENU button to display the on-screen menu.
Press the 5 or button to select “Setup”, then press the
ENTER button.
2. Press the 5 or button to select “Language”,
then press the ENTER button.
3. Select a particular language by pressing the 5 or button repeatedly.
Press the ENTER button.
You can choose one of 21 languages.
4. Press the EXIT button to exit.
When connecting to a game console such as PlayStationTM or XboxTM,
you can enjoy a more realistic gaming experience by selecting game menu.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Setup”, then press the ENTER button.
2. Press the 5 or button to select “Game Mode”, then press the
ENTER button.
3.
Press the 5 or button to select “On” or “Off”. Press the
ENTER
button.
4. Press the EXIT button to exit.
To disconnect the game console and connect another ex ternal device, cancel game
mode in the pic ture menu.
If you display the TV menu in Game mode, the screen shakes slightly.
Game Mode is not available in TV mode.
If Game Mode is On:
• Picture Mode and Sound M ode are automatically changed to Custom and users can
not change the mode.
• Adjust the sound using the equalizer.
• The Reset Sound function is ac tivated. Selecting the Reset function after setting the
equalizer resets the equalizer setting to the factory defaults.
English-22
Setting the Blue Screen Mode / Selecting the Melody
Blue Screen:
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off".
Melody:
You can hear melody sound when the television is powered on or off.
1. Press the MENU button to display the menu. Press the 5 or button to
select “Setup”, then press the ENTER button.
2. Press the 5 or button to select “Blue Screen” or “Melody”.
Press the ENTER button.
3.
Press the 5 or button to select “On” or “Off”.
Press the
ENTER
button.
4. Press the EXIT button to exit.
Using the Energy Saving Feature
This function adjusts the brightness of the TV so as to reduce power consumption.
When you watching TV at night, set the "Energy Saving " mode option to "High" so
as to reduce the dazzling of your eyes as well as the power consumption.
1. Press the MENU button to display the on-screen menu.
Press the 5 or button to select “Setup”, then press the
ENTER button.
2. Press the 5 or button to select “Energy Saving”,
then press the ENTER button.
3. Select the required option (Off, Low, Medium, High) by pressing
the 5 or button. Press the ENTER button.
4. Press the EXIT button to exit.
Setting the Blue Eye
You can set the power of Blue LED to be on. If the power is off when
Blue Eye TV is off, the Blue LED goes off. This will save power and reduce eye
fatigue.
1. Press the MENU button to display the on-screen menu.
Press the 5 or button to select “Setup”, then press the
ENTER button.
2. Press the 5 or button to select “Blue Eye”,
then press the ENTER button.
3.
Press the 5 or button to select “On” or “Off”. Press the
Off: LED(Blue) will not come on.
On: LED(Blue) will come on after you turn the TV off.
4. Press the EXIT button to exit.
English-23
ENTER
button.
Selecting the Source
You can select among external sources connected to
your TV’s input jacks.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Input”.
2. Press the ENTER button again, to select “Source List”.
3. Select the required device by pressing the 5 or button.
Press the ENTER button.
Press the SOURCE button on the remote control to toggel between all the available source.
TV mode can be selected by pres
button on the remote control. But it cannot be selected using the SOURCE button.
/
You can select PC mode by simply pressing the PC button on the remote control.
Editing the Input Source Names
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Input”.
2. Press the 5 or button to select “Edit Name”, then press the
ENTER button.
3. Press the 5 or button to select the device that you wish to edit.
Press the ENTER button.
4. Press the 5 or button to select the required device.
Press the ENTER button.
5. Press the EXIT button to exit.
When no external device is connected to your set, only “T V”, “Ext.1”, “Ext.2” are
activated in the “Source List”. “AV”, “S-Video”, “Component”, “PC”,
“HDMI1” , “HDMI2” are activated only when they are connected to your set.
sing the TV button,
number buttons(0~9), and the
P
English-24
Using the WISELINK Function
You can view stored photos (JPEG files) or play music files (MP3) using a memory card or USB storage media.
The "Photo" menu supports image files in the JPEG format only.
The "Music" menu supports sound files in the MP3 format only.
Compact Flash (CF) / Micro Driver (MD) / MAGICSTOR
Secure Digital Card (SD Card) / Smart Media Card (SM) /
Multimedia Card (MMC) / Memory Stick / MSPRO / XD
USB Mass Storage Class
The USB hub type is not available becuase using the
Half-Speed USB can cause the hardware limitation.
(Only the Full-Speed USB is available.)
Photo Printer
1. First, connect the memory card or USB storage media containing your files to the WISELINK terminal
on the side of the TV.
Supported Memory Cards
Compact Flash (CF) Micro Driver (MD) MAGICSTOR Secure Digital Card
Multimedia Card (MMC) Memory Stick MSPRO XD
2. Using the Remote Control Button in WISELINK Menu
Button Operations
Move the cursor and select an item.
Select the currently selected item.
Play or pause the Slide Show or MP3 file.
Stop the current function and return to the previous high-level menu.
Run various functions from the Photo and Music menus.
Stop the current slide show or MP3 file.
Page Up or Down (file list item)
Return to the previous menu
English-25
(SD Card)
Smart Media Card
Using the WISELINK Menu
This menu shows JPEG and MP3 files and folders saved on a
memory card.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Input”.
2. Press the 5 or button to select “WISELINK”, then press the
ENTER button.
3. Press the 5 or button to select the corresponding Memory Card,
then press the ENTER button.
4. Press the 3 or 4 button to move to an item,
then press the ENTER button.
5. To exit WISELINK, press the WISELINK button on the remote control.
You can select these options by simply pressing the W ISELINK button on the
Using the PHOTO (JPEG) List
This menu shows JPEG files and folders saved on a memory card.
1. Complete Steps 1 to 4 of "Using the WISELINK Menu".
2. Press the 3 or 4 button to select “Photo”, then press the
ENTER button.
3. Press the 5,,3 and 4 buttons to select a file, then
press the ENTER button.
photo in full screen.
4. Press the INFO button to configure the options.
folder icon
photo icon
Move to the previous
folder stage icon
You can select these options
by simply pressing the WI SELINK
button on the remote control.
"View", "Slide Show", "Copy", "Copy All files",
"Delete", "Delete All Files", "Print"
When a full screen is displayed:
"Slide Show", "Rotate", "Zoom", "Copy", "Delete", "Print", "List"
5. To exit WISELINK, press the WISELINK button on the remote control.
At this point, the icon will appear at the top lef t of the screen.
• This menu only shows files whose file extension is JPEG.
Files of other formats such as bmp or tiff will not be displayed.
• The files are displayed on a page. 15 thumbnail photos are displayed per page.
•
• Folders are displayed first and they are followed by all JPEG files in the current folder.
The folders and JPEG files are sorted in alphabetical order.
If the "Insert memor y cards." message is displayed, check whether the memory card
is correctly inserted into the WISELINK terminal on the side of the TV.
A menu for selecting the format of the files saved on the selected
Memory Card will be displayed.
remote control.
The saved file information is displayed as a folder or file.
Pressing the button over a photo icon shows the currently selected
Pressing the button over a folder icon shows the JPEG files included in the folder.
The Menu is displayed. Select the View option to display a photo in the aspect ratio.
When the Photo List screen is displayed:
• Moving to another photo may take a few seconds to load the file.
The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.
English-26
Using the Options Menu
"Slide Show":
Starts a slide show.
(Refer to “Selecting a Photo and Slide Show” on page 28)
"Rotate":
You can rotate images in full screen mode.
Images are rotated in the order of 90°, 180°, 270° and 0° (original state).
(Refer to “Rotating” on page 29)
You cannot save a rotated image.
"Zoom":
You can zoom into images in full screen mode.
Images are zoomed in on in the order of X2, X3, X4 and X1 (original size).
(Refer to “Zooming-in” on page 30)
You cannot save a zoomed-in on image.
"Copy", "Copy All files":
You can copy image files to a different memory card.
(Refer to “Copying Image Files” on page 31)
"Delete", " Delete All Files":
You can delete selected image files.
(Refer to “Deleting Image Files” on page 31)
"Print":
You can print image files directly with your printer.
(Refer to “Printing a Photo” on page 32)
"List":
Displays the stored files and folders and file info.
The “File Error” message appears on the screen in the following situations:
When the file actually has an error
•
If the target memory cannot be writtien to when copying files
•
If the target memory has not enough space when copying files
•
English-27
Viewing Photo File Information
When selecting a photo file, the photo file information is displayed on the left
in the TV scre en, such as the resolution, the date modified and the order of the
file in the current director y.
Selecting a Photo and Slide Show
This menu shows JPEG files and folders saved on a memory card.
1. Complete Steps 1 to 4 of "Using the WISELINK Menu".
(Refer to page 26)
2. Press the 3 or 4 button to select “Photo”, then press the
ENTER button.
The saved file information is displayed as a folder or file.
3. Press the INFO button.
4. Press the 5 or button to select “Slide Show”, then press the
ENTER button.
The Menu is displayed. Select the View option to display a photo in the aspect ratio.
• Slide Show all files in the selected folder at a predetermined interval.
•
During the Slide Show, files are displayed in order from the currently shown file.
5. Press the INFO button during “Slide Show” to set the option
("Speed", "Background Music, "Background Music Setting", "List").
You can select these options
by simply pressing the WI SELINK
button on the remote control.
Press the
6. To change the sub option, press the INFO button again to open the options
window and select option you want to change, then press the ENTER button. Whenever you do this, the sub option on the screen is changed.
7. To exit WISELINK, press the WISELINK button on the remote control.
If the Slide Show feature is selec ted when a photo is displayed in full screen,
other photos are also in the full screen size during the Slide Show.
Such as the resolution
File size
Date modified
Order of the file in the current directory
5 or
button to select the option, then press the
ENTER
button.
Using the Menu during a Slide Show
Normal
"Speed":
Select to control the slide show speed.
Press the ENTER button to select the option "Normal", "Slow", or "Fast".
When the Speed feature is set to the Fast option, usually it takes about 7 seconds to slide to the
next photo. The loading time may be longer depends on the size of the file.
On
"Background Music":
Select to determine whether to play an MP3 file during a slide show.
Press the ENTER button to select the option "On" or "Off ".
Set the Background Music Seetings first to use the “On” or “Off ” function in this menu.
English-28
Loading...