Samsung LE40F7, LE46F7 User Manual

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.

LCD TV

LE40F7
LE46F7

Country

BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
RUSSIA
SLOVAKIA
SPAIN
SWEDEN
U.K
UKRAINE

Customer Care Center

02 201 2418
844 000 844
38 322 887
09 693 79 554
08 25 08 65 65 (€ 0,15/Min)
01805 - 121213 (€ 0,12/Min)
06 40 985 985
199 153 153
02 261 03 710
0900 20 200 88 (€ 0.10/Min)
231 627 22
0 801 801 881
80 8 200 128
8-800-200-0400
0850 123 989
902 10 11 30
08 585 367 87
0870 242 0303
8-800-502-0000

Web Site

www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
www.samsung.com/fr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.ru
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.com/ur

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

BN68-01047Q-00

ON-SCREEN MENUS

PC DISPLAY

PICTURE IN PICTURE (PIP)

TELETEXT

Register your product at www.samsung.com/global/register

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.

© 2006 Samsung Electronics Co., Ltd. All rights reserved.

Contents

English

CONNECTING AND PREPARING YOUR TV

List of Parts....................................................................................... 2

Installing the Wall Mount Kit ................................................ 2

Viewing the Control Panel ......................................................... 3

Viewing the Connection Panel ................................................. 4

Viewing the Remote Control ..................................................... 6

Installing Batteries in the Remote Control ........................... 6

Switching On and Off .................................................................. 7

Placing Your Television in Standby Mode ............................. 7

Plug & Play ....................................................................................... 7

SETTING THE CHANNELS

Storing Channels Automatically .............................................. 8

Storing Channels Manually ........................................................ 8

Setting the Channel Manager .................................................. 9

Activating the Child Lock ...................................................... 10

Sorting the Stored Channels ..................................................... 10

Assigning Channels Names ....................................................... 11

Fine Tuning Channel Reception ............................................... 11

Using the LNA (Low Noise Amplifier) Feature .................... 12

SETTING THE PICTURE

Changing the Picture Standard ................................................ 12

Adjusting the Custom Picture................................................... 12

Changing the Colour Tone ......................................................... 13

Adjusting the Color Tone with the Preferred Color

Component...................................................................................... 13

Resetting the Picture Settings to the

Factory Defaults ............................................................................. 13

Changing the Picture Size .......................................................... 14

Changing the Auto Wide (4:3) .................................................. 14

Freezing the Current Picture ..................................................... 15

Digital Noise Reduction .............................................................. 15

DNIe Demo (Digital Natural Image engine) ........................ 15

Viewing the Picture In Picture (PIP) ........................................ 16

SETTING THE SOUND

Changing the Sound Standard ........................................... 17

Adjusting the Sound Settings ............................................. 17

Setting the TruSurround XT (SRS TSXT ) ........................... 17

Adjusting the Volume Automatically ................................ 18

Selecting the Internal Mute .................................................. 18

Listening to the Sound of the Sub Picture...................... 18

Resetting the Sound Settings to the

Factory Defaults ........................................................................ 19

Connecting Headphones ...................................................... 19

Selecting the Sound Mode ................................................... 19

SETTING THE TIME

Setting and Displaying the Current Time ........................ 19

Setting the Sleep Timer.......................................................... 20

Switching the Television

On and Off Automatically ..................................................... 20

SETTING THE OTHERS

Choosing Your Language ...................................................... 21

Using Game Mode ................................................................... 21

Setting the Blue Screen Mode /

Selecting the Melody ............................................................. 22

Using the Energy Saving Feature ....................................... 22

Selecting the Source ............................................................... 23

Editing the Input Source Names ........................................ 23

WISELINK

Using the WISELINK Function .............................................. 24

Using the WISELINK Menu .................................................... 25

Using the PHOTO (JPEG) List ................................................ 25

Viewing Photo File Information .......................................... 27

Selecting a Photo and Slide Show ..................................... 27

Rotating ....................................................................................... 28

Zooming-in ................................................................................. 29

Copying Image Files ................................................................ 30

Deleting Image Files................................................................ 30

Printing a Photo ........................................................................ 31

Using the MP3 List ................................................................... 31

Copying Music Files ................................................................. 32

Deleting Music Files ................................................................ 32

Using the Setup Menu ........................................................... 33

USING THE TELETEXT FEATURE

Teletext Decoder ...................................................................... 34

Displaying the Teletext Information .................................. 34

Selecting a Specific Teletext Page ...................................... 35

Using Fastext to Select a Teletext Page ............................ 35

Setting Up Your Remote Control ........................................ 36

Remote Control Codes ........................................................... 38

SETTING THE PC

Setting up Your PC Software

(Based on Windows XP) ......................................................... 41

Display Modes ........................................................................... 41

Setting the PC ............................................................................ 42

RECOMMENDATIONS FOR USE

Using the Anti-Theft Kensington Lock ............................. 43

Troubleshooting:

Before Contacting Service Personnel ............................... 43

Technical and Environmental Specifications ................ 44

Warning! Important Safety Instructions
Wiring the Mains Power Supply Plug (UK Only)
Wa rran ty C ard

Symbol Press Important Note One-Touch

Button

English-1

List of Parts

Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.

Remote Control & Batteries

(AAA x 2)



Owner’s Instructions

Warranty card / Safety Guide / Registration Cards (Not available in all locations)

Power Cord Cover-Bottom Cleaning Cloth

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage to
the product or injury to yourself or others
if you elect to install the TV on your own.

 Registration Cards

Remove the stand and cover the bottom hole with a
cap and fasten with two screws.

English-2

Viewing the Control Panel

The product colour and shape may vary depending on the model.

SOURCE

Toggles between all the available input soures
(TV, Ext.1, Ext.2, AV, S-Video, Component, PC,
HDMI1, HDMI2). In the on-screen menu,
use this button as you use the ENTER
on the remote control.

button

Press to change channels.
In the on-screen menu, use the
as you use the  and  buttons on the remote
control.
on the TV by using the Channel buttons.)

(Without the Remote Control, you can turn

buttons

MENU

Press to see an on-screen menu of
your TV’s features.

Press to decrease or increase the volume.
In the on-screen menu, use the
as you use the  and  buttons on the remote
control.

buttons

Speakers

(

Power)

Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and lights
up in stand-by mode.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

English-3

Viewing the Connection Panel

[Rear Panel Jacks]

Power Input

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.

[Side Panel Jacks]

English-4

Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial / A cable television network / A satellite network

Connecting HDMI/DVI

-

Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs).

- No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?

- “High Definition Multimedia Interface” allows the transmission of high definition digital video data and multiple

channels of digital audio ( 5.1 channels).

- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).

The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R - AUDIO - L” terminal

on DVI for sound output.

- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that

it has been set to a compatible video output mode as shown in the table below.
Failure to observe this may result in picture distortion, image breakup or no picture.

Supported modes for DVI or HDMI

480i
50 Hz
60 Hz

- Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card.
(This will result in a blank screen being displayed)

- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD)
and connect the VCR (or DVD) to your set.

- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out
connectors on the A/V device.

- Headphone may be connected to the headphone output (

Component

Connecting Set-Top Box, VCR or DVD

-

Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.

Connecting External A/V Devices

- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

X
X
O

480p

O
O
O

While the headphone is connected, the sound from the built-in speakers will be disabled.

SERVICE

- Service connection for qualified service engineer.

Connecting AUDIO

- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio in

connectors on the Amplifier or DVD Home Theater.

Connecting Computer

-

Connect the D- Sub cable (optional) to “PC (PC IN)” on the rear of your set and the other end to the Video Card of your computer.

- Connect the stereo audio cable (optional) to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the
sound card on your computer.

Connecting Component Devices (DTV/DVD)

- Connect component video cables (optional) to component connector (“P

ends to corresponding component video out connectors on the DTV or DVD.

- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)
and connect the DTV (or DVD) to component connector (“P

-

The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio
out connectors on the DTV or DVD.

- This LCD TV displays its optimum picture resolution in 1080p mode.

- This LCD TV displays its maximum picture resolution in 1080p mode.

Kensington Lock

- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

- If you want to use a locking device, contact the dealer where you purchased the TV.

-

The place of the Kensington Lock may be different depending on its model.

576i

X
X
O

) on the rear of your set.

R”, “ P B”, “Y”) on your set.

576p

O
X
O

R”, “ P B”, “Y”) on the rear of your set and the other

720p

O
O
O

1080i

O
O
O

1080p

O
O
O

English-5

Viewing the Remote Control

Selects a target device to be
controlled by the Samsung remote

control

(TV, DVD, STB, CABLE, VCR)

(Refer to page 36~40)

Television Standby button

Number buttons for direct
channel access

One/Two-digit channel selection

It displays "Channel Manager"
on the screen.

Selects the TV mode directly
VCR/DVD Functions

Rewind, Stop, Play/Pause,

Fast/Forward

Volume increase
Volume decrease

Temporary sound switch-off

Menu display and
change confirmation

Picture-In-Picture On / Off

Picture effect selection

Sound effect selection

Sound mode selection

SRS TSXT selection

SET: Adjusts 5 separate devices - TV,

DVD, STB, CABLE, or VCR.
RESET: When your remote does not
work, change the batteries and press
the “RESET” button for 2-3 seconds
before use.

Available source selection

When pressing this button, a number of

buttons on the remote control (e.g.
Selects a target device, volume, channel and
MUTE buttons) light up for a few seconds and
then turn off to save power. This function is
to conveniently use the remote control at
night or when dark.

The performance of the remote control may be affected by bright light.

This is a special remote control for the visually impaired, and has Braille points
on the Power, Channel and Volume buttons.

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batterie

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a

long time. The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

s.

English-6

Previous channel

Automatic Power-off

This function enables you to load saved
photo (JPEG) and audio files (MP3)

and to view or play them on the TV.

P : Next channel
P

: Previous channel

Exit the OSD
Control the cursor in the menu

Use to see information on the
current broadcast

Picture size selection

Selects the PC mode directly

Picture freeze

Input source selection

Teletext Functions

Exit from the Teletext display

Teletext index

Teletext hold
Teletext size selection

Teletext store

Teletext mode selection (LIST/FLOF)

Teletext sub page

P : Teletext next page
P

: Teletext previous page

Teletext cancel

Teletext reveal

Alternately select Teletext, Double, or Mix.

Fastext topic selection

Switching On and Off

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2. Press the button on the front of the set.

You also can press the POWER button or the

The programme that you were watching last is reselected automatically.

TV

( ) button on the remote control to turn the TV on.

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4. To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful
when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER

The screen is turned off and a blue standby indicator appears on the front of your set.

button on the remote control.

2. To switch your set back on, simply press the POWER , numeric buttons (0~9) or channel
up/down (

It is best to unplug the set from the mains and aerial.

/ ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).

Plug & Play

When the TV is initially powered on, several basic settings proceed
automatically and subsequently. The following settings are available.

1. Press the POWER button on the remote control.
The message “Start Plug & Play” is displayed with “OK” selected.

2.

Press the  or  buttons to select “Shop” or “Home”, then the ENTER button.

We recommend setting the TV to Home mode for the best picture in your home envronment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop Mode, press and hold the MENU button on the side

panel of the TV for five seconds to return to Dynamic (Home) mode.

3. Select the appropriate language by pressing the  or  button.
Press the ENTER button to confirm your choice.

4. The message “Check antenna input.” is displayed with “OK” selected.
Press the ENTER button.

Please check that the antenna cable is connected correctly.

5. Select the appropriate country by pressing the  or  button.
Press the ENTER button to confirm your choice.

6. The “Auto Store” menu is displayed with the “Start” selected.
Press the ENTER button.

The channel search will start and end automatically.
After all the available channels are stored, the “Clock Set” menu appears.
Press the

ENTER

7. Press the ENTER button.
Select the “Hour” or “Minute” by pressing the

Set the “Hour” or “Minute” by pressing the

You can also set the hour and minute by pressing the number buttons on the remote control.

8. Press the ENTER button to confirm your setting.

 Language: Select your language.
 Country: Select your country.
 Auto Store: Automatically scans for and stores channels available in the local area.
 Clock Set: Sets the current time for the TV clock.

button at any time to interrupt the memorization process.

 or 

 or 

English-7

button.

button.

If you want to reset this feature...

1. Press the MENU button to display the menu.
Press the  or 

button

to select “Setup”, then press the

ENTER

button.

2. Press the ENTER button again, to select “Plug & Play”.

3. The message to “Start Plug & Play” is displayed.

- Storing Channels Automatically

- Storing Channels Manually

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically
allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1. Press the MENU button to display the menu.
Press the  or  button to select “Channel”, then press the

2. Press the ENTER button to select “Country”.

3. Select the appropriate country by pressing the  or  button.

Press the ENTER button to confirm your choice.

4. Press the  or  button to select “Auto Store”, then press the

5. Press the ENTER button.

The TV will begin memorizing all of the available channels.
Press the

ENTER

button at any time to interrupt the memorization process and return to the “Channel” menu.

6. After all the available channels are stored, the “Sort” menu appears.

ENTER button.

ENTER button.

Storing Channels Manually

You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:

Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.

1. Press the MENU button to display the menu.
Press the  or  button to select “Channel”, then press the

2. Press the  or  button to select “Manual Store”, then press the

3. Press the

ENTER button to select “Programme”.

4. To assign a programme number to a channel, find the correct number by pressing the  or  button
and then press the

You can also set a programme number by pressing the number buttons on the remote control.

ENTER button.

ENTER button.

ENTER button.

English-8

5. Press the  or  button to select “Colour System”, then press the ENTER button.

6. Select the colour standard required by pressing the  or  button then, press the

7. Press the  or  button to select “Sound System”, then press the

ENTER button.

8. Select the sound standard required by pressing the  or  button, then press the

If there is an abnormal sound or no sound, re-select the sound system required.

9.

If you know the number of the channel to be stored, press the  or  button to select “Channel”. Press the ENTER button.

ENTER button.

ENTER button.

Select C (Air channel) or S (Cable channel) by pressing the  or  button. Press the  button to select channel.
Select the required number by pressing the  or  button and then press the

Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)

You can also set a channel number by pressing number buttons on the remote control.

ENTER button.

10. If you do not know the channel numbers, press the  or  button to select “Search”.
Press the ENTER button. Search by pressing the  or  button and then press the ENTER button.

11. Press the  or  button to select “Store”. Press the ENTER button to select “OK”.

12. Repeat steps 3 to 11 for each channel to be stored.

 Programme: Selects a program number for the channel.
 Colour System: Sets the colour supporting system.
 Sound System: Sets the sound supporting system.

Setting the Channel Manager

Set the channels according to your preference.
You can easily delete, add, or lock the channel you want.

1. Press the MENU button to display the menu. Press the  or  button

to select “Channel”, then press the

2.

Press the  or  button to select “Channel Manager”,

then press the ENTER button.

3.

Press the ENTER button again, to select “Channel Manager”.

.

Press the  button to select “ ” line.

4

.

Press the  or  button to select the undesired channel,

5

then press the ENTER button to cancel.

6. Repeat steps 5 for each channel to be selected or canceled

7. Press the EXIT button to exit.

“ ”

is active when “Child Lock” is selected to “On”.

You can select these options by
simply pressing the CH MGR
button on the remote control.

 Channel: Selects a channel.
 Search: Scans for the frequency value for the channel.
 Store: Saves your settings.

ENTER button.

English-9

Activating the Child Lock

This feature allows you to prevent unauthorized users, such as children, from
watching unsuitable programmes by muting out video and audio. Child Lock can­not be released using the buttons on the side.
Only the remote control can release the Child Lock setting, so keep the remote
control away from children.

1. Press the MENU button to display the menu. Press the  or  button

to select “Channel”, then press the

2.

then press the ENTER button.

3.

4.

5.

button.

.

6

.

7

then press the ENTER button.

8. Repeat steps 7 for each channel to be locked or unlocked.

9. Press the EXIT button to exit.

selected on

Sorting the Stored Channels

You can exchange the numbers of two channels, in order to:

automatically stored.

most often.

1. Press the MENU button to display the menu. Press the  or  button

to select “Channel”, then press the

2.

3.

 or  button repeatedly. Press the ENTER button.

4.

change and then press the

5.

6.

ENTER button.

Press the  or  button to select “Channel Manager”,

Press the  or  button to select “Child Lock”, then press the ENTER button.

Press the  or  button to select “On”. Press the

ENTER

button.

Press the  or  button to select “Channel Manager”, then press the ENTER

Press the  button to select “ ” line.

Press the  or  button to select the channels you want to lock,

Select “On” or “Off ” in “Child Lock” to easily turn the channels which

Press the  or  button to select “Sort”, then press the

“ ”

to be active or inactive.

Modify the numeric order in which the channels have been

Give easily remembered numbers to the channels that you watch

ENTER button.

ENTER

button.

Select channel number that you wish to change by pressing the

The selected channel number and name are moved to right side.

Press the

 or 

button to move to the position in which you would like to

ENTER

The selected channel is exchanged with the one previously stored to the chosen

number.

button.

Repeat steps 3 to 4 for another channel to be sorted.

Press the EXIT button to exit.

English-10

Assigning Channels Names

Channel names will be assigned automatically when channel
information is broadcast.
These names can be changed, allowing you to assign new names.

1. Press the MENU button to display the menu. Press the  or  button

to select “Channel”, then press the

2.

Press the  or  button to select “Name”, then press the

3.

If necessary, select the channel to be assigned to a new name by

pressing the

4.

5.

Repeat steps 3 to 4 for each channel to be assigned to a new name.

Press the EXIT button to exit.

6.

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.

1. Use the number buttons to directly select the channel that

you want to fine tune.

2. Press the MENU button to display the menu.

Press the  or  button to select “Channel”, then press the

3. Press the  or  button to select “Fine Tune”, then press the

4. Press the  or  button to adjust the fine tuning.

Press the

5. Press the EXIT button to exit.

Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand

side of the channel number in the channel banner. And the channel number turns red.

To reset the fine-tuning, select “Reset” by pressing the  or  button and then press the

ENTER button.

ENTER button.

ENTER

button.

 or 

The selection bar is displayed around the name box.

To. ..

Select a letter, number or symbol

Move on the next letter

Move back the previous letter

Confirm the name

The characters available are :

Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)

ENTER

button. Press the ENTER button.

button.

Then...

Press the

 or 

Press the  button

Press the

Press the ENTER button

button



button

ENTER button.

ENTER button.

English-11

Using the LNA (Low Noise Amplifier) Feature

This function is very useful in the situation that the TV is used in a weak
signal area. LNA amplifies the TV signal in the weak signal area, a low-noise
preamplifier boosts the incoming signal.

1. Press the MENU button to display the menu.

Press the  or  button to select “Channel”, then press the

2.

Press the  or  button to select “LNA”, then press the ENTER button.

3.

Select “Off“ or “On“ by pressing the  or  button.

Press the ENTER button.

4.

Press the EXIT button to exit.

If the picture is noisy with the LNA set to On, select Off.
LNA setting must be set for each individual channel.

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing
requirements.

1. Press the MENU button to display the menu. Press the  or 

button to select “Picture”, then press the

2.

Press the ENTER button again, to select “Mode”.

ENTER button again.

Press the

 or 

button to select the desired picture effect.

ENTER

button.

Press the EXIT button to exit.

(Refer to “Adjusting the Custom Picture”)

The Picture mode must be adjusted separately for each input source.
You can return to the factory defaults picture settings by selecting the “Reset”.

You can also press the
P.MODE button on the remote
control to select one of the
picture settings.

Press the

3.

Press the

4.

 Dynamic: Selects the picture for high-definition in a bright room.
 Standard: Selects the picture for optimum display in a normal environment.
 Movie: Selects the picture for comfortable display in a dark room.
 Custom: Select to view your favorite display settings.

(Refer to “Resetting the Picture Settings to the Factory Defaults” on page 13)

ENTER button.

ENTER button.

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3.

Press the

2.

Press the

3.

Press the

particular item.

Press the EXIT button to exit.

4.

 Contrast: Adjusts the lightness and darkness between objects and the background.
 Brightness: Adjusts the brightness of the whole screen.
 Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
 Colour: Adjusts the colours, making them lighter or darker.
 Tint (NTSC only):

The adjusted values are stored according to the selected Picture mode.
I n PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted

 or  button

ENTER

 or  button

to select a particular item.

button.

to decrease or increase the value of a

Press the ENTER button.

Adjusts the colour of objects, making them more red or green for a more natural look.

English-12

Changing the Colour Tone

You can select the most comfortable colour tone to your eyes.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3 on page 12.

Press the  or  button to select “Colour Tone”, then press the ENTER button.

2.

3.

Press the

 or  button

Press the

4.

 Cool2: Makes the colour temperature bluer
than “Cool1” menu.

 Cool1: Makes whites bluish.
 Normal: Keeps whites white.

ENTER

Press the EXIT button to exit.

The adjusted values are stored according to the selected Picture mode.

to select the desired colour tone setting.

button.

 Warm1: Makes whites reddish.
 Warm2: Makes the colour temperature

redder than “Warm1” menu.

Adjusting the Color Tone with the Preferred Color Component

You can adjust a picture’s color tone with your preferred color component.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3 on page 12.

Press the  or  button to select “Colour Manager”, then press the ENTER

2.

button.

3.

Press the

 or  button

Press the

4.

item.

5.

 R Contrast:
the background.
 G Contrast:
and the background.
 B Contrast:
the background.

 R Brightness:
 G Brightness:
 B Brightness:
 Reset:

You cannot select a "Colour Tone" in the "Colour Manager".

ENTER

Press the

 or  button

Press the ENTER button.

Press the EXIT button to exit.

Lightens or intensifies the red component of the border between objects and

Lightens or intensifies the green component of the border between objects

Lightens or intensifies the blue component of the border between objects and

Adjusts the brightness of the red component for the entire screen.
Adjusts the brightness of the green component for the entire screen.
Adjusts the brightness of the blue component for the entire screen.

Resets all settings to the defaults.

to select a particular item.

button.

to decrease or increase the value of a particular

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3 on page 12.

2. Press the  or  button to select “Reset”, then press the ENTER button.

Press the EXIT button to exit.

3.

The “Reset” will be set for each picture mode.

English-13

Changing the Picture Size

You can select the picture size which best corresponds to your
viewing requirements.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Size”, then press the ENTER button.

3. Select the required option by pressing the  or  button.

4.

 Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.

You can select these options
by simply pressing the P.SIZE
button on the remote control.

 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
 WIDE 4:3 : Magnify the size of the picture more than 4:3.
 Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
 4:3: This is the default setting for a video movie or normal broadcasting.

Zoom : Select by pressing the  or  buttons. Use the  or  button to move the

picture up and down. After selecting , use the  or  button to magnify or

reduce the picture size in the vertical direction.

WIDE 4:3 : Move the screen up/down using the  or  button after selecting the

by pressing the  or ENTER button.

Changing the Auto Wide (4:3)

Press the

ENTER

button.

Press the EXIT button to exit.

“Auto Wide” function is available only in "TV", "Ext1", "Ext2", "AV", and "S-Video" mode.

In PC Mode, only “16:9” and “4:3” mode can be adjusted.

Adjusts the display picture size to 4:3 appropriate for input signal

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Auto Wide (4:3)”, then press the

ENTER button.

3. Select the required option by pressing the  or  button.
Press the

ENTER

4.

Press the EXIT button to exit.

These functions don’t work in "Component", "PC", "HDMI1" and "HDMI2" mode.

 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
 WIDE 4:3 : Magnify the size of the picture more than 4:3.
 Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
 4:3: This is the default setting for a video movie or normal broadcasting.

button.

English-14

Freezing the Current Picture

Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.

Digital Noise Reduction

If the broadcast signal received by your TV is weak, you can activate the Digital
Noise Reduction feature to help reduce any static and ghosting that may appear
on the screen.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Digital NR”, then press the ENTER button.

Press the  or  button to select “On” or “Off”. Press the

3.

4. Press the EXIT button to exit.

DNIe Demo (Digital Natural Image engine)

Samsung’s new technology brings you more detailed images with
contrast and white enhancement. A new image compensation algorithm gives
viewers brighter and clearer images. DNIe technology will match every signal to
your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode
to On.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2. Press the  or  button to select “DNIe Demo”, then press the ENTER button.

Press the  or  button to select “On” or “Off”. Press the

3.

4. Press the EXIT button to exit.

These functions don’t work in PC mode.

The DNle Demo is designed to show the difference between the regular and

DNIe pictures.

By default, the product displays the picture with DNle applied.

ENTER

ENTER

button.

button.

English-15

Viewing the Picture In Picture (PIP)

You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the picture of set
programme or video input from any connected equipment while watching the
main picture.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

Press the  or  button to select “PIP”, then press the

2.

3. Press the ENTER button again.

Press the  or  button to select “On”, then press ENTER button.

If the PIP is activated, the size of the main picture turns to “16:9”.

4. Press the  or  button to select “Source”,

Press the PIP button on the
remote control repeatedly to acti
vate or deactivate the “PIP”.

then press ENTER button. Select a source of the sub picture by
pressing the  or  button and press the ENTER button.

The sub picture can serve different source selections based on what the main picture is set to.

5. Press the  or  button to select “Swap”.

To interchange the main picture and the sub picture, select “Swap” option and
press the ENTER button.

The main picture and the sub picture are interchanged.

I

f main picture is in “PC” mode, “Swap” is not available.

6. Press the  or  button to select “Size” of the sub picture and then

press the ENTER button. Select a size of the sub picture by
pressing the  or  button and then press the ENTER button.

If main picture is in “PC” mode, “Size” is not available.

7. Press the  or  button to select “Position”, then press the ENTER

button. Select the position of the sub picture by pressing the  or 
button and then press the ENTER button.

8. Press the  or  button to select “Programme” and then press the ENTER

button. You can select the channel that you want to view through sub picture
by pressing the  or  button.
Press the ENTER button.

The “Programme” can be active when the sub picture is set to TV.

9. Press the EXIT button to exit.

You may notice that the picture in the PIP window becomes slightly unnatural when you use

the main screen to view a game or karaoke.

 Source: Used to select a source of the sub picture.

 Swap: Used to interchange the main picture and the

sub picture.

PIP Settings

Sub

TV

Ext.1

Ext.2

AV

S-Video

PC

HDMI1

HDMI2

TV

X

X

X

X

X

X

O

O

O

Main

Component

(O: PIP operates, X: PIP doesn’t operate)

Ext.1

Ext.2

X

X

X

X

X

X

X

X

X

X

X

X

O

O

O

O

O

O

ENTER

 Size: Used to select a size of the sub picture.

 Position: Used to move the sub picture.

 Programme: Used to Change the sub picture.

AV

S-Video

X

X

X

X

X

X

O

O

O

Component

X

X

X

X

X

X

X

O

O

PC

X

X

X

X

X

X

X

O

O

X

X

X

X

X

X

X

X

X

button.

HDMI1

HDMI2

O

O

O

O

O

O

O

O

O

O

O

O

X

X

X

X

X

X

English-16

Changing the Sound Standard

You can select the type of the special sound effect to be used when watching a
given broadcast.

1. Press the MENU button to display the menu. Press the  or  button to

select “Sound”, then press the ENTER button.

2. Press the

3. Select the required sound effect by pressing the  or  button repeatedly

and then press the ENTER button.

4. Press the EXIT button to exit.

 Standard: Selects the normal sound mode.

You can also select these options by
simply pressing the S.MODE button
on the remote control.

 Music: Emphasizes music over voices.
 Movie: Provides live and full sound for movies.
 Speech: Emphasizes voices over other sounds.

Adjusting the Sound Settings

The sound settings can be adjusted to suit your personal preferences.

1. Press the MENU button to display the menu. Press the  or  button to
select “Sound”, then press the ENTER button.

2. Press the  or  button to select “Equalizer”, then press the ENTER button.

Press the

3.

Press the

4. Press the  or  button to reach the required setting.
Press the ENTER button.

5. Press the EXIT button to exit.

If you make any changes to these settings, the Sound Mode is automatically switched to “Custom”.

ENTER button again, to select “Mode”.

 Custom: Selects your custom sound settings.

 or  button

ENTER

to select a particular item.

button.

(Refer to “Adjusting the Sound Settings”)

Setting the TruSurround XT (SRS TSXT)

TruSurround XT is a patented SRS technology that solves the problem of playing

5.1 multichannel content over two speakers.
TruSurround delivers a compelling,virtual surround sound experience through any
two-speaker playback systems, including internal television speakers. It is fully
compatible with all multichannel formats.

1. Press the MENU button to display the menu. Press the  or  button to
select “Sound”, then press the ENTERbutton.

2. Press the  or  button to select “SRS TSXT”, then press the ENTER button.

Press the  or  button to select “On” or “Off”. Press the

3.

4. Press the EXIT button to exit.

You can also set these options
simply by pressing the SRS
button on remote control.

TruSurround XT, SRS and symbol are trademarks of
SRS Labs, Inc. TruSurround XT technology is incorporated under license
from SRS Labs, Inc.

English-17

ENTER

button.

Adjusting the Volume Automatically

Each broadcasting station has its own signal conditions, and so it is not easy for
you to adjust the volume every time the channel is changed.
This feature allows you to automatically adjust the volume of the desired channel
by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.

1. Press the MENU button to display the menu. Press the  or  button to
select “Sound”, then press the ENTER

2. Press the  or  button to select “Auto Volume”, then press the ENTER

Press the  or  button to select “On” or “Off”. Press the

3.

4. Press the EXIT button to exit.

Selecting the Internal Mute

If you want to hear the sound through separate speakers, cancel the internal
amplifier.

1. Press the MENU button to display the menu. Press the  or  button to
select “Sound”, then press the ENTER

2. Press the  or  button to select “Internal Mute”, then press the ENTER

Press the  or  button to select “On” or “Off”. Press the

3.

4. Press the EXIT button to exit.

When “Internal Mute” is set to “On’, the Sound menus except for “Sound Select”

(in PIP mode) cannot be adjusted.

button.

button.

ENTER

ENTER

button.

button.

button.

button.

Listening to the Sound of the Sub Picture

During the PIP features activation, you can listen to the sound of the sub
picture.

1. Press the MENU button to display the menu. Press the  or  button to
select “Sound”, then press the ENTER button.

2. Press the  or  button to select “Sound Select”, then press the ENTER button.

3. Press the  or  button to select “Sub”. Press the ENTER button.

4. Press the EXIT button to exit.

 Main: Used to listen to the sound of the main picture.


Sub: Used to listen to the sound of the sub picture.

You can select this option when the “PIP” is set to “On”.

English-18

Resetting the Sound Settings to the Factory Defaults

If Game Mode is On, the Reset Sound function is activated. Selecting the Reset
function after setting the equalizer resets the equalizer setting to the factory
defaults.

1. Press the MENU button to display the menu. Press the  or  button to
select “Sound”, then press the ENTER button.

2. Press the  or  button to select “Reset”, then press the ENTER button.

3. Press the EXIT button to exit.

You can select this option when the “Game Mode” is set to “On”.

Connecting Headphones

You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.

When you insert the head set jack into the corresponding port,
you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu.
(Refer to “Selecting the Internal Mute” on page 18)

Prolonged use of headphones at a high volume may damage your hearing.

You will not receive sound from the speakers when you connect headphones to the system.

Selecting the Sound Mode

You can set the sound mode by pressing the “DUAL” button.
When you press it, the current sound mode is displayed on the screen.

Audio Type

You can also set these options
simply by pressing the DUAL
button on remote control.

FM

Stereo

NICAM
Stereo

Mono

Stereo

Dual

Mono

Stereo

Dual

DUAL 1/2

MONO

STEREO ↔ MONO

DUAL 1 ↔ DUAL 2

MONO

MONO ↔ STEREO

MONO ↔ DUAL 1

DUAL 2

Default

Automatic

change

DUAL 1

Automatic

change

DUAL 1

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is displayed when you press
the INFO button. You must also set the time if you wish to use the automatic
On/Off timers.

1. Press the MENU button to display the menu. Press the  or  button to
select “Setup”, then press the ENTER button.

Press the  or  button to select “Time”, then press the

2.

3. Press the ENTER button to select “Clock Set”.

4.

To. ..

Move to “Hour” or “Minute”

Set the “Hour” or “Minute”

Press the ENTER button.

5. Press the EXIT button to exit.

If you disconnect the power cord, you have to set the clock again.

You can also set hour and minute by pressing the number buttons on the remote control.

English-19

ENTER

button.

Press the...

 or  button.

 or  button.

Setting the Sleep Timer

You can select a time period of between 30 and 180 minutes after which the
television automatically switches to standby mode.

1. Press the MENU button to display the menu. Press the  or  button to
select “Setup”, then press the ENTER button.

Press the  or  button to select “Time”, then press the

2.

3. Press the  or  button to select “Sleep Timer”, then press the ENTER button.

4. Press the  or  button repeatedly until the desired time appears

(Off, 30, 60, 90, 120, 150, 180). Press the ENTER button.

Press the SLEEP button on the
remote control repeatedly until
the appropriate time interval
appears.

5. Press the EXIT button to exit.

The TV automatically switches to standby mode when the timer reaches 0.

Switching the Television On and Off Automatically

You can set the On/Off timers so that the set will:

Switch on automatically and tune to the channel of your choice at

the time you select.

Switch off automatically at the time you select.

The first step is to set the television’s clock.

1. Press the MENU button to display the menu. Press the  or  button to
select “Setup”, then press the ENTER

2. Press the  or  button to select “Time”, then press the ENTER

3. Press the  or  button to select “On Timer”, then press the ENTER

4. Press the  or  button to adjust “Hour”, then press the  button to

move to the next step. Set other items using the same method as above.
When finished, press the ENTER

5. Press the  or  button to select “Off Timer”, then press the ENTER

6. Press the  or  button to adjust “Hour”, then press the  button to

move to the next step. Set other items using the same method as above.
When finished, press the ENTER

7. Press the EXIT button to exit.

You can also set hour and minute by pressing the number buttons on the remote control.
The "Activation" setting must be set to "Yes" in order for the timers to work.

button.

button to return.

button to return.

ENTER

button.

button.

button.

button.

English-20

Choosing Your Language

Using Game Mode

When you start using your set for the first time, you must select the
language which will be used for displaying menus and indications.

1. Press the MENU button to display the on-screen menu.
Press the  or  button to select “Setup”, then press the

2. Press the  or  button to select “Language”, then press the

ENTER button.

ENTER button.

3. Select a particular language by pressing the  or  button repeatedly.
Press the

ENTER button.

You can choose one of 21 languages.

4. Press the EXIT button to exit.

When connecting to a game console such as PlayStationTM or XboxTM,
you can enjoy a more realistic gaming experience by selecting game menu.

1. Press the MENU button to display the menu. Press the  or  button to
select “Setup”, then press the ENTER button.

2. Press the  or  button to select “Game Mode”, then press the ENTER button.

Press the  or  button to select “On” or “Off”. Press the

3.

ENTER

button.

4. Press the EXIT button to exit.

To disconnect the game console and connect another external device, set Game to Off in the

setup menu.

If you display the TV menu in Game mode, the screen shakes slightly.

Game Mode is not available in TV mode.

If Game Mode is On:

• Picture Mode and Sound Mode are automatically changed to Custom and users can

not change the mode.

• Adjust the sound using the equalizer.

• The Reset Sound function is activated. Selecting the Reset function after setting the

equalizer resets the equalizer setting to the factory defaults.

English-21

Setting the Blue Screen Mode / Selecting the Melody

Blue Screen:
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background. If you wish to continue viewing the poor
picture, you must set the "Blue Screen" mode to "Off".

Melody:
You can hear melody sound when the television is powered on or off.

1. Press the MENU button to display the menu. Press the  or  button to
select “Setup”, then press the ENTER button.

2. Press the  or  button to select “Blue Screen” or “Melody”.
Press the ENTER button.

Press the  or  button to select “On” or “Off”.

3.

Press the

ENTER

button.

4. Press the EXIT button to exit.

Using the Energy Saving Feature

This function adjusts the brightness of the TV so as to reduce power consumption.
When you watching TV at night, set the "Energy Saving " mode option to "High" so
as to reduce the dazzling of your eyes as well as the power consumption.

1. Press the MENU button to display the on-screen menu.
Press the  or  button to select “Setup”, then press the

2. Press the  or  button to select “Energy Saving”,
then press the

3. Select the required option (Off, Low, Medium, High) by pressing
the  or  button. Press the

4. Press the EXIT button to exit.

ENTER button.

ENTER button.

ENTER button.

English-22

Selecting the Source

You can select among external sources connected to your TV’s input jacks.

1. Press the MENU button to display the menu.
Press the ENTER button, to select “Input”.

2. Press the

activated in the “Source List”. “AV”, “S-Video”, “Component”, “PC”,

“HDMI1” , “HDMI2” are activated only when they are connected to your set.

ENTER button again, to select “Source List”.

When no external device is connected to your set, only “TV”, “Ext.1”, “Ext.2” are

3. Select the required device by pressing the  or  button.
Press the ENTER button.

Press the SOURCE button on the remote control to toggel between all the available source.

TV mode can be selected by pressing the TV button, number buttons(0~9), and the
P

/

You can select PC mode by simply pressing the PC button on the remote control.

Editing the Input Source Names

Name the device connected to the input jacks to make your input source
selection easier.

1. Press the MENU button to display the menu.
Press the ENTER button, to select “Input”.

2. Press the  or  button to select “Edit Name”, then press the ENTER button.

3. Press the  or  button to select the device that you wish to edit.

Press the ENTER

4. Press the  or  button to select the required device.
Press the ENTER button.

5. Press the EXIT button to exit.

button on the remote control. But it cannot be selected using the SOURCE button.

button.

English-23

Using the WISELINK Function

You can view stored photos (JPEG files) or play music files (MP3) using a memory card or USB storage media.

The "Photo" menu supports image files in the JPEG format only.

The "Music" menu supports sound files in the MP3 format only.

Compact Flash (CF) / Micro Driver (MD) / MAGICSTOR

Secure Digital Card (SD Card) / Smart Media Card (SM) /

Multimedia Card (MMC) / Memory Stick / MSPRO / XD

USB Mass Storage Class

The USB hub type is not available becuase using the
Half-Speed USB can cause the hardware limitation.
(Only the Full-Speed USB is available.)

Photo Printer

1. First, connect the memory card or USB storage media containing your files to the WISELINK terminal
on the side of the TV.

Supported Memory Cards

Compact Flash (CF) Micro Driver (MD) MAGICSTOR Secure Digital Card

Multimedia Card (MMC) Memory Stick MSPRO XD

Some types of Memory Cards or USB hosts, depending on the manufacturer, may not be supported.

2. Using the Remote Control Button in WISELINK Menu

Button Operations

Move the cursor and select an item.

Select the currently selected item.

Play or pause the Slide Show or MP3 file.

Stop the current function and return to the previous high-level menu.

Run various functions from the Photo and Music menus.

Stop the current slide show or MP3 file.

Page Up or Down (file list item)

Return to the previous menu

(SD Card)

Smart Media Card

English-24

Using the WISELINK Menu

This menu shows JPEG and MP3 files and folders saved on a
memory card.

1. Press the MENU button to display the menu.
Press the ENTER button, to select “Input”.

2. Press the  or  button to select “WISELINK”, then press the ENTER button.

is correctly inserted into the WISELINK terminal on the side of the TV.

3. Press the  or  button to select the corresponding Memory Card,
then press the ENTER button.

Memory Card will be displayed.

4. Press the  or  button to move to an item, then press the ENTER button.

5. To exit WISELINK, press the WISELINK button on the remote control.

You can select these options by simply pressing the WISELINK button on the
remote control.

Using the PHOTO (JPEG) List

This menu shows JPEG files and folders saved on a memory card.

1. Complete Steps 1 to 4 of "Using the WISELINK Menu".

2. Press the  or  button to select “Photo”, then press the ENTER button.

3. Press the ,, and  buttons to select a file, then

press the ENTER button.

photo in full screen.

4. Press the INFO button to configure the options.

"View", "Slide Show", "Copy", "Copy All files",

folder icon

photo icon

Move to the previous

folder stage icon

You can select these options
by simply pressing the WISELINK
button on the remote control.

"Delete", "Delete All Files", "Print"

When a full screen is displayed:

"Slide Show", "Rotate", "Zoom", "Copy", "Delete", "Print", "List"

5. To exit WISELINK, press the WISELINK button on the remote control.

At this point, the icon will appear at the top left of the screen.

• This menu only shows files whose file extension is JPEG.

Files of other formats such as bmp or tiff will not be displayed.

• The files are displayed on a page. 15 thumbnail photos are displayed per page.

•

• Folders are displayed first and they are followed by all JPEG files in the current folder.

The folders and JPEG files are sorted in alphabetical order.

If the "Insert memory cards." message is displayed, check whether the memory card

A menu for selecting the format of the files saved on the selected

The saved file information is displayed as a folder or file.

Pressing the button over a photo icon shows the currently selected

Pressing the button over a folder icon shows the JPEG files included in the folder.

The Menu is displayed. Select the View option to display a photo in the aspect ratio.

When the Photo List screen is displayed:

• Moving to another photo may take a few seconds to load the file.

The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.

English-25

Using the Options Menu

"Slide Show":

Starts a slide show.

(Refer to “Selecting a Photo and Slide Show” on page 27)

"Rotate":

You can rotate images in full screen mode.
Images are rotated in the order of 90°, 180°, 270° and 0° (original state).

(Refer to “Rotating” on page 28)

You cannot save a rotated image.

"Zoom":

You can zoom into images in full screen mode.
Images are zoomed in on in the order of X2, X3, X4 and X1 (original size).

(Refer to “Zooming-in” on page 29)

You cannot save a zoomed-in on image.

"Copy", "Copy All files":

You can copy image files to a different memory card.

(Refer to “Copying Image Files” on page 30)

"Delete", " Delete All Files":

You can delete selected image files.

(Refer to “Deleting Image Files” on page 30)

"Print":

You can print image files directly with your printer.

(Refer to “Printing a Photo” on page 31)

"List":

Displays the stored files and folders and file info.

The “File Error” message appears on the screen in the following situations:

When the file actually has an error

•

If the target memory cannot be writtien to when copying files

•

If the target memory has not enough space when copying files

•

English-26

Viewing Photo File Information

When selecting a photo file, the photo file information is displayed on the left
in the TV screen, such as the resolution, the date modified and the order of the
file in the current directory.

Selecting a Photo and Slide Show

This menu shows JPEG files and folders saved on a memory card.

1. Complete Steps 1 to 4 of "Using the WISELINK Menu".(Refer to page 25)

2. Press the  or  button to select “Photo”, then press the ENTER button.

The saved file information is displayed as a folder or file.

3. Press the INFO button.

4. Press the  or 

The Menu is displayed. Select the View option to display a photo in the aspect ratio.

• Slide Show all files in the selected folder at a predetermined interval.

•

During the Slide Show, files are displayed in order from the currently shown file.

5. Press the INFO button during “Slide Show” to set the option
("Speed", "Background Music, "Background Music Setting", "List").
Press the

6. To change the sub option, press the INFO button again to open the options
window and select option you want to change, then press the ENTER

You can select these options
by simply pressing the WISELINK
button on the remote control.

button. Whenever you do this, the sub option on the screen is changed.

7. To exit WISELINK, press the WISELINK button on the remote control.

If the Slide Show feature is selected when a photo is displayed in full screen,

other photos are also in the full screen size during the Slide Show.

Such as the resolution

File size

Date modified

Order of the file in the current directory

button to select “Slide Show”, then press the ENTER button.

 or 

button to select the option, then press the

ENTER

button.

Using the Menu during a Slide Show

Normal

"Speed":

Select to control the slide show speed.
Press the ENTER button to select the option "Normal", "Slow", or "Fast".

When the Speed feature is set to the Fast option, usually it takes about 7 seconds to slide to the

next photo. The loading time may be longer depends on the size of the file.

On

"Background Music":

Select to determine whether to play an MP3 file during a slide show.
Press the ENTER button to select the option "On" or "Off".

Set the Background Music Seetings first to use the “On” or “Off ” function in this menu.

English-27

Rotating

You can select these options
by simply pressing the WISELINK
button on the remote control.

"Background Music Setting":

The saved file information is displayed as folder or MP3 file.

1. Select the "Background Music Settings" and press the ENTER button.
Navigate to the folder that contains the MP3 files to use as the
background music. Select an MP3 file and press ENTER button.

The selected file is displayed in yellow.

2. MENU button again to return to the Slide Show screen.
The selected background music is played.

• If you turn Off the Background Music, even if the Background Music Settings

have been set up, the background music will not be played.

• MP3 files can be automatically played during the Slide Show if the Default

Background Music is set to On. To enable this function, MP3 files and

other photo files must be located in the same folder.

"List":

Displays the stored files and folders and file info.

Displays a 90°, 180°, or 270° rotated image in full screen mode.

1. Complete Steps 1 to 4 of "Using the WISELINK Menu". (Refer to page 25)

2. Press the  or  button to select “Photo”, then press the ENTER button.

The saved file information is displayed as a folder or file.

3. Press the ,, and  buttons to select a file, then press the ENTER button.

Pressing the button over a photo thumbnail displays the photo in full screen.

The Menu is displayed. Select the View option to display a photo in the aspect ratio.

4. Press the INFO button to display the option
("Slide Show", "Rotate", "Zoom", "Copy", "Delete", "Print", "List").
Press the  or  button to select “Rotate”, then press the
ENTER button. Press the ENTER button to select the option
(90°, 180°, 270°, 0°(Original))
To rotate a photo, press the INFO button to open the options window,
select the “Rotate” option and press the ENTER button.
Whenever you do this, the photo on the screen is gradually rotated.

5. To exit WISELINK, press the WISELINK button on the remote control.

The rotated file is not saved.

This feature is also available for the photo in the aspect ratio.

The Rotating function information

Current OSD

English-28

Function

To rotate a photo by 90 degrees

To rotate a photo by 180 degrees

To rotate a photo by 270 degrees

To rotate a photo by original

Zooming-in

You can select these options
by simply pressing the WISELINK
button on the remote control.

Displays a 2x, 3x or 4x zoomed-in image in full screen mode.

1. Complete Steps 1 to 4 of "Using the WISELINK Menu". (Refer to page 25)

2. Press the  or  button to select “Photo”, then press the ENTER button.

The saved file information is displayed as a folder or file.

3. Press the ,, and  buttons to select a file, then press the ENTER button.

Pressing the button over a photo thumbnail displays the photo in full screen.

The Menu is displayed. Select the View option to display a photo in the aspect ratio.

4. Press the INFO button to display the option
("Slide Show", "Rotate", "Zoom", "Copy", "Delete", "Print", "List").
Press the  or  button to select “Zoom”, then press the
ENTER button. Press the ENTER button to select the option
("X2", "X3", "X4", "X1").
To zoom into a photo, press the INFO button to open the Options window,
select the “Zoom” option and press the ENTER button.
Whenever you do this, the following zoom options are applied in sequence.

• X2: Zoom-in to the photo X2.

• X3: Zoom-in to the photo X3.

• X4: Zoom-in to the photo X4.

• X1: Restore the photo to its original size.

To move to pan up/down/left/right, press the ,, and  buttons.

5. To exit WISELINK, press the WISELINK button on the remote control.

Zoom function information

Current OSD

Button

Pan Down

Pan Up

Pan Right

Pan Left

This feature is also available for the photo in the aspect ratio.

Function

Zoom-in to a photo X2.

Zoom-in to a photo X3.

Zoom-in to a photo X4.

Restore a photo to its original size.

Function

Pan down to view the lower
part of a zoomed-in photo.

Pan up to view the upper part
of a zoomed-in photo.

Pan right to view the right side
of a zoomed-in photo.

Pan left to view the left side of a
zoomed-in photo.

English-29

Copying Image Files

You can select these options
by simply pressing the WISELINK
button on the remote control.

Deleting Image Files

You can select these options
by simply pressing the WISELINK
button on the remote control.

You can copy image files to a different memory card.

1. Complete Steps 1 to 4 of "Using the WISELINK Menu". (Refer to page 25)

2. Press the  or  button to select “Photo”, then press the ENTER button.

The saved file information is displayed as a folder or file.

3. Press the ,, and  buttons to select a file, then press the ENTER button.

Pressing the button over a photo thumbnail displays the photo in full screen.

The Menu is displayed. Select the View option to display a photo in the aspect ratio.

4. Press the INFO button to display the option
("Slide Show", "Rotate", "Zoom", "Copy", "Delete", "Print", "List").
Press the  or  button to select “Copy”, then press the ENTER button.

To copy all photos, select the INFO button in the Photo List screen and

then select the "Copy All Files" menu.

If there is no target memory card inserted, the “There is no device connected.”

message is displayed and no operation follows.

5. To exit WISELINK, press the WISELINK button on the remote control.

You can delete selected image files.

1. Complete Steps 1 to 4 of "Using the WISELINK Menu". (Refer to page 25)

2. Press the  or  button to select “Photo”, then press the ENTER button.

The saved file information is displayed as a folder or file.

3. Press the ,, and  buttons to select a file, then press the ENTER button.

Pressing the button over a photo thumbnail displays the photo in full screen.

The Menu is displayed. Select the View option to display a photo in the aspect ratio.

4. Press the INFO button to display the option
("Slide Show", "Rotate", "Zoom", "Copy", "Delete", "Print", "List").
Press the  or  button to select “Delete”, then press the ENTER button.

To delete all photos, select the INFO button in the Photo List screen and

then select the "Delete All Files" menu.

When selecting the “Delete” or “Delete All Files” menu, an OSD screen

is displayed to confirm the deletion. To cancel the deletion, select “No.”

5. To exit WISELINK, press the WISELINK button on the remote control.

English-30

Printing a Photo

You can select these options
by simply pressing the WISELINK
button on the remote control.

Using the MP3 List

folder icon

musical note icon

Move to the previous

folder stage icon

You can print image files directly with your printer.

1. Complete Steps 1 to 4 of "Using the WISELINK Menu". (Refer to page 25)

2. Press the  or  button to select “Photo”, then press the ENTER button.

The saved file information is displayed as a folder or file.

3. Press the ,, and  buttons to select a file, then press the ENTER button.

Pressing the button over a photo thumbnail displays the photo in full screen.

The Menu is displayed. Select the View option to display a photo in the aspect ratio.

4. Press the INFO button to display the option
("Slide Show", "Rotate", "Zoom", "Copy", "Delete", "Print", "List").
Press the  or  button to select “Print”, then press the ENTER button.

If no printer is connected, the "Check the printer" message is displayed

and no operation follows.

5. To exit WISELINK, press the WISELINK button on the remote control.

Connect to the photo printer with the PictBridge feature to print pictures.

This menu shows MP3 files from among the files saved on the memory card.

1. Complete Steps 1 to 4 of "Using the WISELINK Menu". (Refer to page 25)

2. Press the  or  button to select “Music”, then press the ENTER button.

The saved file information is displayed as a folder or file.

3. Press the  or  button to select a file, then press the ENTER button.
To select all files or a file, press the INFO button to display
the Music menus. ("Play", "Play All Files", "Copy", "Copy All Files",
"Delete", "Delete All Files")
Press the ENTER button to select “Play All Files” or “Play”.

• Pressing the ENTER button over a musical note icon immediately plays the

music file.

• Pressing the ENTER button over a folder icon shows the music files included

in the folder.

To select a file on the next page, press the REW or FF button
to move to the next page.

Press the PLAY/PAUSE button while playing an MP3 file to pause the file.

4.

Press the STOP button to exit Play mode.

5. To exit WISELINK, press the WISELINK button on the remote control.

• This menu only shows files with the MP3 file extension. Files with other file

extensions are not displayed, even if they are saved on the same memory card.

• The selected file is displayed on the top with its playing time.

• To adjust the music volume, press the or button on the remote control.

To mute the sound, press the MUTE button on the remote control.

You can select these options
by simply pressing the WISELINK
button on the remote control.

English-31

Music function information

Current OSD

(Music) Play/Pause

Function

When pressing the PLAY/PAUSE button on the
remote control while music is playing.

Copying Music Files

You can select these options
by simply pressing the WISELINK
button on the remote control.

Deleting Music Files

(Music) Stop

When pressing the STOP
control when music is stopped.

button on the remote

You can copy music files to a different memory card.

1. Complete Steps 1 to 4 of "Using the WISELINK Menu". (Refer to page 25)

2. Press the  or  button to select “Music”, then press the ENTER button.

The saved file information is displayed as a folder or file.

3. Press the  or  button to select a file, then press the ENTER button.
To select all files or a file, press the INFO button to display
the Music menus. ("Play", "Play All Files", "Copy", "Copy All Files",
"Delete", "Delete All Files")
Press the ENTER button to select “Copy” or “Copy All Files”.

If no target memory card is inserted, the “There is no device connected.”

message is displayed and no operation follows.

4. To exit WISELINK, press the WISELINK button on the remote control.

You can delete selected music files.

1. Complete Steps 1 to 4 of "Using the WISELINK Menu".(Refer to page 25)

2. Press the  or  button to select “Music”, then press the ENTER button.

The saved file information is displayed as a folder or file.

3. Press the  or  button to select a file, then press the ENTER button.
To select all files or a file, press the INFO button to display
the Music menus. ("Play", "Play All Files", "Copy", "Copy All Files",
"Delete", "Delete All Files")
Press the ENTER button to select “Delete” or “Delete All Files”.

When selecting the “Delete” or “Delete All Files” menu, an OSD screen is

displayed to confirm the deletion. To cancel the deletion, select “No.”

4. To exit WISELINK, press the WISELINK button on the remote control.

You can select these options
by simply pressing the WISELINK
button on the remote control.

English-32

Using the Setup Menu

You can select these options
by simply pressing the WISELINK
button on the remote control.

Setup displays the user settings of the WISELINK menu.

1. Complete Steps 1 to 4 of "Using the WISELINK Menu". (Refer to page 25)

2. Press the  or  button to select “Setup”, then press the ENTER button.

The saved file information is displayed as a folder or file.

3. Press the  or  button to select an item you want, then press the ENTER
button.

4. Press the  or  button to select the option, then press the ENTER button.

5. To exit WISELINK, press the WISELINK button on the remote control.

"Slide Show Speed":

Select to control the slide show speed.

"Slide Show Effect":

You can select effects to use with the slide show.

"Slide Show Repeat":

• On: Repeats the slide show from the beginning when all the files in the
folder have been displayed.

• Off: Exit a slide show.
To return to the Photo menu when all the files in the folder have been displayed.

"Music Repeat":

Select to determine whether to repeat playing the music when all MP3 files in the
current folder have been played.

"Background Music":

Select to determine whether to play an MP3 file during a slide show.

"Background Music Setting":

You can select the background music to play during a slide show.
You can also select the background music while a slide show is in process by press­ing the INFO button and selecting the “Background Music Setting” menu.

"Screen Saver":

Select to set the waiting time before the screen saver is run
when no button is pressed.

English-33

Teletext Decoder

Most set channels carry “ Teletext ”, pages of written
information that provide information such as:

The Teletext pages are organized according to six categories:

Displaying the Teletext Information

You can display Teletext information at any time, but signal reception must be
good. Otherwise:

Information may be missing.

Some pages may not be displayed.

To activate the Teletext mode and display the contents page:

Using the P ( ) or P ( ) button, select the channel providing the

1.

Teletext service.

2.

Press the TTX/MIX ( ) button to activate the Teletext mode.

The contents page is displayed. It can be redisplayed at any time by pressing the

MENU ( ) button.

3. Press the TTX/MIX ( ) button again.

The actual broadcast will be displayed with “Teletext”, “Double”, and “Mix” in order

on the screen.

4. Press the TV( ) button to exit from the Text display.

If any broken character appears while Text is being viewed, make sure that the

Text language is identical with the language in the “Setup” menu mode. If both languages are

different, select the same language with the Text language on the “Setup” menu.

Television programme times.

News bulletins and Weather forecasts.

Sports results.

Subtitles for the hard of hearing.

Part

A

B

C

D

E

F

Contents

Selected page number.

Broadcasting station identity.

Current page number or search status.

Date and time.

Tex t.

Status information.

English-34

Selecting a Specific Teletext Page

Press the number buttons on the remote control to enter the page number
directly:

Enter the three-digit page number listed in the contents by pressing the

1.

corresponding numeric buttons.

2.

If the selected page is linked with several secondary pages, the secondary

pages are displayed in sequence. To freeze the display on a given page, press

PIP

the

3. Using the various display options:

To display...

Both Teletext information and the normal broadcast

Hidden text (answers to quiz games, for example)

The normal screen

A secondary page, by entering its 4-digit number

The next page

The previous page

Double-size letters in the:

 Upper half of the screen

 Lower half of the screen

Normal screen

( ) button. Press the

PIP

( ) button again to resume.

Press the...

TTX/MIX (

INFO ( )

)

INFO (

PRE-CH (

( )

P

P

( )

P.MODE

( )

 Once

 Twice

 Three times

)

)

Using Fastext to Select a Teletext Page

The various topics included in the Teletext pages are colour-coded, and can be selected
by pressing the coloured buttons on the remote control.

1.

Display the Teletext contents page by pressing the
TTX/MIX ( )

2. Press the coloured button corresponding to the topic that you wish to

select (The available topics are listed on the status information line).

3. Press the Red button to display the previous page.

Press the Green button to display the next page.

4. Press the TV(

button.

) button to exit from the Text display.

English-35

Setting Up Your Remote Control

After it has been set up properly, your remote control can operate in five different
modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button on the
remote control allows you to switch between these modes, and control whichever piece
of equipment you choose.

The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-

Top Boxes.

Setting Up the Remote to Operate Your VCR

1.

Turn off your VCR.

2. Press the VCR button on your TV ’s remote control.

3. Press the SET button on your TV’s remote control.

Using the number buttons on your remote control, enter three digits of the VCR

4.

code listed on page 38 of this manual for your brand of VCR. Make sure you
enter three digits of the code, even if the first digit is a “0”.
(If more than one code is listed, try the first one.)

5.

Press the POWER button on the remote control.
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3, and 4, but try one of
the other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 080.

Note on Using Remote Control Modes: VCR

When your remote control is in “VCR” mode, the volume buttons still control your TV’s volume.

Setting Up the Remote to Operate Your Cable Box

1.

Turn off your cable box.

2. Press the

3. Press the SET button on your TV’s remote control.

Using the number buttons on your remote control, enter three digits of the

4.

cable box code listed on page 39 of this manual for your brand of cable box.
Make sure you enter three digits of the code, even if the first digit is a “0”. (If
there is more than one code listed, try the first one.)

5.

Press the POWER button on the remote control.
Your cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set up, repeat steps 2, 3, and 4, but try
one of the other codes listed for your brand of cable box. If no other codes are
listed, try each code, 000 through 046.

Note on Using Remote Control Modes: Cable Box

When your remote control is in “CABLE” mode, the volume buttons still control your TV ’s volume.

CABLE

button on your TV’s remote control.

English-36

Setting Up the Remote to Operate Your DVD

1.

Turn off your DVD.

2. Press the

DVD

button on your TV’s remote control.

3. Press the SET button on your TV’s remote control.

Using the number buttons on your remote control, enter three digits of the

4.

DVD code listed on page 39~40 of this manual for your brand of DVD.
Make sure you enter three digits of the code, even if the first digit is a “0”.
(If there is more than one code listed, try the first one.)

5.

Press the POWER button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set up, repeat steps 2, 3, and 4, but try one of
the other code s listed for your brand of DVD.
If no other codes are list-ed, try each code, 000 through 141.

Note on Using Remote Control Modes: DVD

When your remote control is in “DVD” mode, the volume buttons still control your TV’s volume.

Setting Up the Remote to Operate Your STB

1.

Turn off your STB.

2. Press the

STB

button on your TV’s remote control.

3. Press the SET button on your TV’s remote control.

Using the number buttons on your remote control, enter three digits of the STB

4.

code listed on page 40 of this manual for your brand of STB.
Make sure you enter three digits of the code, even if the first digit is a “0”.
(If there is more than one code listed, try the first one.)

5.

Press the POWER

button on the remote control.
Your STB should turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of
the other codes listed for your brand of STB.
(If no other codes are listed, try each code, 000 through 074.)

Note on Using Remote Control Modes: STB

When your remote control is in “STB” mode, the volume buttons still control your TV’s volume.

English-37

Remote Control Codes

VCR

Brand Code

SAMSUNG 000 001 002 003 004 005 077 078 079

ADMIRAL 020

AIWA 025

AKAI 004 027 032

AUDIO DYNAMICS 007 026

BELL&HOWELL 018

BROKSONIC 022

CANDLE 002 003 006 008 015 055

CANON 021 056

CITIZEN 002 003 006 008 015 055

COLORTYME 007

CRAIG 002 024

CURTIS MATHES 002 007 008 017 021 025 056 064 066

DAEWOO 003 010 011 012 013 014 015 016

DB 007 026

DIMENSIA 017

DYNATECH 025

ELECTROHOME 034

EMERSON

FISHER 018 024 028 029 048 051 061

FUNAI 025

GENERAL ELECTRIC

GO VIDEO 002

HARMAN KARDON 007

HITACHI 019 025 041 042 074

INSTANT REPLAY 021

JC PENNEY

JCL

JVC

KENWOOD

KLH

KONIA

LG(Goldstar)

LIOYD

LOGI K

LXI

MAGNAVOX

MARANTZ

MARTA

MEI

MEMOREX

MGA

MIDLAND

MINOLTA

MITSUBISHI

001 003 006 021 022 025 030 032 034 040 047
050 052 060 063 065 066 067 069 073

002 005 017 021 056

002 007 018 019 021 026 037 041 054 056

007 008 018 021 026 037

081 082 083

007 008 018 021 026 037

070

036

006 007 008 009 010

025

038

025

021 056 059

007 008 018 021 026 037 062

006

021

006 021 024 025

034

005

019 041 075

019 034 041 046

Brand Code

MONTGOMERY WARD

MTC 002 025

MULTITECH 002 005 025 038

NEC 007 008 018 026 037 062 064

OPTIMUS 020

ORION 073 074 075 076

PANASONIC 021 056 071 072

PENTAX 019 041 075

PENTEX RESEARCH+

PHILCO 021 056 059

PHILIPS 021 080

PIONEER 019 026 039 053

PORTLAND 015 049 055

PROSCAN 017

QUARTZ 018

QUASAR 021 056

RADIO SHACK/
REALISTIC

RCA

SANSUI 026

SANYO 018 024

SCOTT 003 047 052 067

SEARS 006 018 019 024 028 029 041 048 051

SHARP 020 034 045 015

SHIMTOM 027 033 038 058

SIGNATURE 025

SONY 027 033 044

SYLVANIA 021 025 056 059

SYMPHONIC 025

TANDY 018 025

TASHIKA 006

TATUNG 037

TEAC 025 037 068

TECHNICS 021

TEKNIKA 006 021 025 031

TMK 066

TOSHIBA 003 019 029 051 052

TOTEVISION 002 006

UNITECH 002

VECTOR RESEARCH

VICTOR 026

VIDEO CONCEPTS 007 026

VIDEOSONIC 002

WAR DS

YAMAHA 007 008 018 026 037

ZENITH 023 027 033

020

008

006 018 020 021 024 025 029 034 048 056

002 017 019 021 035 041 043 057 068 076

007 026

002 003 006 019 020 021 024 025 034 038 041

English-38

CABLE BOX

Brand Code

SAMSUNG 000 001 002 003 004 005 006 007

GI 041

HAMLIN 003 024 031

HITACHI 025 030

JERROLD 038 039

MACOM 025 030

MAGNAVOX 019 023 028

OAK 026

PANASONIC 003 022 027 037 044

PHILIPS 019 021 023 028

PIONEER 004 018 020 044

RCA 014 022 040

REGAL 003

SAMSUNG DVD

Product Code

DVD 000 001 002

DVDR 003 004

BD Record 005 006

VCR COMBO 007 008 009 010 011

VCR Record 012

DHR COMBO 013

DVD

Brand Code

ANAM 030

AUDIOVOX 075

AUDIOLOGIC 085

ANABA 072

APEX DIGITAL 070 071 074 086 083 084 088 111 112

AIWA 114

BROKSONIC 062

BLAUPUNKT 074

B&K 122 123

CURTIS MATHES 027

CYBER HOME 077 078 079 082

CLARION 080 125

CIRRUS 081

CYBER HOME 065

CINEVISION 095

DAEWOO 066

DENON 146

FARENHEIT 067 068

FISHER 090

GPX 060

GO VIDEO 061 089 133 135

GE 069 074

GREENHILL 074

HITACHI 064 113

HITEKER 071

HOYO 073

HARMAN / KARDON

IRT 089

091 110

Brand Code

REGENCY 015 023

SA 042 043

SCIENTIFIC ATLAN 042 043

SPRUCER 022

STARGATE 2000 036

SYLVANIA 016

TEXSCAN 016

TOCOM 032

UNIVERSAL 033 034

VIEWSTAR 019 021 023 028

WARNER AMEX 046

ZENITH 017 029 035 037 045

Product Code

Home Theater VCR COMBO 014 015 016

HDD Recorder COMBO 017

TWIN TRAY COMBO 018

STB DVD COMBO 019

DVD Receiver 020

AV Receiver 021

Brand Code

INTEGRA 092

JBL 091

JVC 022 033 115 116

JATON 073

KENWOOD 051 108 109

KISS 073

KONKA 059 100 106 107

KLH 074 075

LG(Goldstar) 025 031

LOEWE 057

LASONIC 058

MOBILE AUTHORITY

MEMOREX 055

MALATA 056

MAGNAVOX 076 093

MINTEK 074 094

MONYKA 073

NORCENT 048 049 050

NEXT BASE 052

NEC 053

NANTAUS 144

NESA 074

OPTOMEDIA ELECTRONICS

OPTIVIEW 072

ONKYO 076 092 119

PHILCO 044 045

PRINCETON 046 047

PROSCAN 023

054

105

English-39

DVD

Brand Code

PANASONIC 024 034 124 134 136 137 138

PHILIPS 036 076

ROTEL 117 118

RIO 120

RCA 023 035 074 075 131 132

RAITE 073

ROWA 038

SAMPO 104

SONY 026 029 126 127 128 129 130 141

SHERWOOD 039 041

SVA 042

SYLVANIA 043 093

SHARP 140

SANSUI 062

SANYO 062 090

SHINSONIC 094

SAMSUNG SET-TOP BOX

Product Code

Ground wave STB 001 002

Satellite STB 003

CABLE STB 004

STB DVD COMBO 008

Satellite STB HDD COMBO Standard 009

SET-TOP BOX

Brand Code

ALPHASTAR 023

ANAM 043

CHANNEL MASTER 018 034

CROSSDIGITAL 019

CHAPARRAL 035

DIRECT TV 015 016 017 019 022 045 060 061 062 065

DAEWOO 074

DISH NETWORK SYSTEM

DISHPRO 069

DRAKE 018 024 032

DX ANTENNA 027

ECHOSTAR 025 069 070 071

EXPRESSVU 069

GOI 069

GE 065

GENERAL INSTRUMENT

HTS 069

HOME CABLE 056

HITACHI 022

HUGHES NETWORK

IQ 020

IQ PRISM 020

JANEIL 059

JERROID 063

JVC 069 070

LG(Goldstar) 044 073

066 067 068

069 070

046 047 048 063 064

015 017

English-40

Brand Code

THOMSON 145

TOSHIBA 028 062 076

TECHNICS 139

TVIEW 072

TOKAI 073

TEAC 096

TECHWOOD 097

TREDEX 098 099 101

URBAN CONCEPTS

VENTURER 075

VOCOPRO 102

YAMAHA 032 063

YAMAKAWA 040 073

XWAVE 103

ZENITH 076 121

Product Code

Satellite STB HDD COMBO Premium 010

CABLE STB HDD COMBO Standard 011

CABLE STB HDD COMBO Premium 012

Ground wave STB HDD COMBO Standard 013

Ground wave STB HDD COMBO Premium 014

Brand Code

MAGNAVOX 016 021 036 038 039 040 041 042

MEMOREX 016

MOTOROLA 064

MACOM 018

MITSUBISHI 015

NEXT LEVEL 047 048 064

PHILIPS 015 016 017 021 033 036 038 039 040 041

PRIMESTAR 046 049 050 063

PANASONIC 058 059 061 062

PAYSAT 016

PROSCAN 065 066

RCA 051 052 053 065 066

RADIOSHACK 064

REALISTIC 057

STAR TRAK 026

STS 020 027

SKY 031

SKY LIFE 005 006 007

SHACK 064

STAR CHOICE 064

SONY 054 060

TOSHIBA 015 017 028 029 030 072

ULTIMATE TV 060 066

UNIDEN 016 021 037 055 056 057

ZENITH 024 031 068

076

042 067

Setting up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be differ­ent depending upon your particular version of Windows and your particular video card. Even if your actual screens
look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manu­facturer or Samsung Dealer.)

1. First, click on “Control Panel” on the Windows start menu.

2. When the control panel window appears, click on “Appearance and Themes” and a display

dialog-box will appear.

3. When the control panel window appears, click on “Display” and a display
dialog-box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1920 X 1080
If a vertical-frequency option exists on your display settings dialog box, the correct value is
“60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended. (All resolutions between the supported limits are supported)

Mode Resolution

IBM

VESA

The inter face mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
HDMI/DVI does not suppor t PC function.
Separate and Composite modes are supported. SOG is not supported.

640 X 350 31.469 70.086 25.175 + / ­ 640 x 480 31.469 59.940 25.175 - / ­ 720 x 400 31.469 70.087 28.322 - / +

640 X 480 35.000 70.000 28.560 - / +
640 x 480 37.861 72.809 31.500 - / ­ 640 x 480 37.500 75.000 31.500 - / ­ 800 x 600 35.156 56.250 36.000 + / +
800 x 600 43.750 70.000 45.500 - / +
800 x 600 37.879 60.317 40.000 + / +
800 x 600 48.077 72.188 50.000 + / +
800 x 600 46.875 75.000 49.500 + / +
1024 x 768 57.672 72.000 78.434 - / ­ 1024 x 768 48.364 60.000 65.000 - / ­ 1024 x 768 56.476 70.069 75.000 - / ­ 1024 x 768 60.023 75.029 78.750 + /+
1152 x 864 67.500 75.000 108.000 + / +
1280 x 960 60.000 60.000 108.000 + / +
1280 x 1024 63.981 60.020 108.000 + / +
1280 x 1024 74.620 70.000 128.943 - / ­ 1280 x 1024 76.824 72.000 132.752 - / ­ 1280 x 1024 79.976 75.025 135.000 + / +
1600 x 1200 75.000 60.000 162.000 + / +
1920 x 1080 66.587 59.934 138.500 + / -

Horizontal

Frequency (kHz)

Vertical

Frequency (Hz)

Pixel Clock

Frequency (MHz)

Sync Polarity

(H/V)

English-41

Setting the PC

Press the PC button on the
remote control to select the PC
mode.

Coarse and Fine Tuning of the Image (Image Lock):
The purpose of picture quality adjustment is to remove or reduce picture noise. If the
noise is not removed by Fine-tuning alone, then adjust the
frequency as best as possible (coarse) and Fine-tune again. After the noise has been
reduced, re-adjust the picture so that it is aligned on the center of screen.

1. Preset: Press the PC button to select PC mode.

2. Press the MENU button to display the menu.

Press the  or  button to select “Setup”,
then press the ENTER button.

3. Press the  or  button to select “PC”, then
press the ENTER button.

4. Press the ENTER button to select “Image Lock”.

5. Press the  or  button to select “Coarse” or “Fine”,

then press the ENTER button.

6. Press the  or  button to adjust the screen quality.
Press the ENTER button.

7. Press the EXIT button to exit.

Changing the Image Position (Position):
Adjust the PC’s screen positioning if it does not fit the TV screen.

1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)”
instructions number 1 to 3.

2. Press the  or  button to select “Position”,
then press the

ENTER button.

3. Press the  or  button to adjusting the Vertical-Position.
Press the  or  button to adjust the Horizontal-Position.
Press the

ENTER button.

4. Press the EXIT button to exit.

Adjusting the PC Screen Automatically (Auto Adjustment):
Auto adjustment allows the PC screen of set to self-adjust to the
incoming PC video signal. The values of fine, coarse and position are adjusted
automatically.

1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)”
instructions number 1 to 3.

2. Press the  or  button to select “Auto Adjustment”,
then press the

ENTER button.

3. Press the EXIT button to exit.

Initializing the Image Settings (Image Reset):
You can replace all image settings with the factory default values.

1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)”
instructions number 1 to 3.

2. Press the  or  button to select “Image Reset”,
then press the

ENTER button.

3. Press the EXIT button to exit.

English-42

Using the Anti-Theft Kensington Lock

The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may differ from the illustration
depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use.

1. Insert the locking device into
the Kensington slot on the LCD
TV (Figure 1), and turn it in the

Cable

Figure 2

Figure 1

locking direction (Figure 2).

2. Connect the Kensington lock
cable.

3. Fix the Kensington lock to a
desk or a heavy stationary
object.

<Optional>

The place of the Kensington Lock may be different depending on its model.

Troubleshooting: Before Contacting Service Personnel

No sound or picture

Normal picture but no sound

No picture or black and white picture

Sound and picture interference

Blurred or snowy picture,
distorted sound

Remote control malfunctions

“Check signal cable.”
message is displayed.

On PC mode, “Mode Not Supported.”
message is displayed.

The TFT LCD panel uses a panel consisting of sub pixels (3,147,264) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

 Check that the mains lead has been connected to a wall socket.
 Check that you have pressed the
 Check the pic ture contrast and brightness settings.
 Check the volume.

 Check the volume.
 Check whether the MUTE
 Check if “Internal Mute” is off

 Adjust the colour settings.
 Check that the broadcast system selected is correct.



Try to identify the electrical appliance that is affecting the set and move it further away.

 Plug your set into a different mains socket.

 Check the direction, location and connections of your aerial.

This inter ference is often due to the use of an indoor aerial.

 Replace the remote control batteries.
 Clean the upper edge of the remote control (transmission window).
 Check the batter y terminals.

 Check that the signal cable is firmly connected to the PC or video sources.
 Check that the PC or video sources are turned on.

 Check the maximum resolution and the frequency of the video adaptor.
 Compare these values with the data in the Display Modes.

English-43

buttons on the front of the set.

button has been pressed on the remote control.

Technical and Environmental Specifications

Model Name

Screen Size (Diagonal)

Power Supply

Power Consumption

PC Resolution

Sound

Output

Dimension (WxDxH)

Body
With stand

Weight

With stand

Environmental Considerations

Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity

LE40F7

40 inch

AC 220-240 V, 50 Hz

210 W

1920 x 1080 @ 60 Hz

10 W x 2

994 x 92 x 647 mm

994 x 290 x 696 mm

24.3 kg

10 °C to 40 °C (50 °F to 104 °F)

10 % to 80 %, non-condensing

-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing

Stand Swivel (Left / Right)

-20˚ ~ 20˚

LE46F7

46 inch

AC 220-240 V, 50 Hz

275 W

1920 x 1080 @ 60 Hz

10 W x 2

1129 x 106 x 732 mm
1129 x 320 x 788 mm

35.3 kg

10 °C to 40 °C (50 °F to 104 °F)

10 % to 80 %, non-condensing

-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing

Design and specifications are subject to change without prior notice.

This device is a Class B digital apparatus.

English-44

Warning! Important Safety Instructions

Please read the appropriate section that corresponds to the marking on your Samsung product before
attempting to install the product.

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING
TO QUALIFIED PERSONNEL.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.
To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be
blocked or covered.

- Do not cover the slots and openings with a cloth or other materials.

- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.

- Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation
is provided.

• Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

• Do not place sources of heat on this apparatus, such as a candles, ash trays, incense or other similar items.

• Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock.

• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool etc.).
If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately.
You can clean this apparatus with damp cloth when necessary, but be sure to unplug the apparatus first.

• Do not expose this apparatus to extreme temperature conditions or to extreme humidity conditions.

• This appratus use batteries. In your community there might be regulations that require you to dispose of these batteries
properly under environmental considerations. Please contact your local authorities for disposal or recycling information.

• To cut off the power source, unplug this apparatus from the wall outlet.

• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric
shock.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug
it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor
corrsponds to the local electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.

• Be sure to hold the plug, not the cord, when disconnecting this apparatus from an electric socket.

• Locate this apparatus near an easily accessible AC outlet.

• If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it

- unplug it immediately and contact an authorized dealer or service center.

• Unplug this apparatus from the AC outlet before any service.

• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an
extended period of time (especially when children, elderly or disabled people will be left alone in the house).

- Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate
sparks and heat or the insulation to deteriorate.

• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low
temperatures, high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station
etc. Failure to do so may cause serious damage to your set.

This symbol indicates that high voltage is
present inside.
It is dangerous to make any kind of contact
with any internal part of this product.

This symbol alerts you that important
literature concerning operation and maintenance
has been included with this product.

Wiring the Mains Power Supply Plug (UK Only)

IMPORTANT NOTICE

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicat­ed on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must
be of the same colour as the pin face of the plug. Replacement covers are available from your dealer. If the fitted plug
is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should
obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative
but to cut off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to a mains socket
as there is a risk of shock hazard from the bared flexible cord.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as fol­lows: The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.

WARNING:

DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

Warranty Card

UNITED KINGDOM

This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defec­tive materials and workmanship. In the event that warranty service is required, you should return the product to the
retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC
Countries will comply with the warranty on the terms issued to purchasers in the country concerned. In case of difficulty,
details of our Authorised Service Centres are available from:

Samsung Electronics (U.K.) Ltd.,

Unit C, Customer Care Centre, Stafford Park 12,

TELFORD, Shropshire TF3 3BJ,

Tel: [phone], Fax: [phone]

WARRANTY CONDITIONS

1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly

completed and is presented with the original invoice or sales slip or confirmation, and the serial number on
the product has not been defaced.

2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the

defective part.

3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres.

No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work
and damage to the products caused by such repair work will not be covered by this warranty.

4. This product is not considered to be defective in materials nor workmanship by reason that it requires

adaptation in order to conform to national or local technical or safety standards in force in any Country other
than the one for which the product was originally designed and manufactured.

This page is intentionally

left blank.

This page is intentionally

left blank.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal.