LCD TV
QUICK SETUP GUIDE
The Supplied Accessoris ¦
y
Remote Control & Batteries (AAA x 2)
y
Owner’s Instructions
Warranty Card / Safety Guide (Not available in some locations) y
y
Blanking Bracket
See separate guide for installing the stand.
y
Stand (1EA)
Installing Batteries in the Remote Control ¦
y
Cleaning Cloth
y
Power Cord
(46 inch TV)
y
Cable tie
y
Guide Stand (1EA)
NOTE
✎
Use the remote control within 23 feet from
x
the TV.
Bright light may affect the performance
x
of the remote control. Avoid using nearby
special fluorescent light or neon signs.
The colour and shape may vary depending
x
on the model.
y
Holder-Ring (4ea)
(M4 X L12)
y
Screws (9EA)
English - 1
BN68-02800A-00
Installing the Stand ¦
Preset Step 1 Step 2
Front
Front
Rear
Preset ✎: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to models
(Depending on the model)
Step 1. Attach your LCD TV to the stand.
Two or more people should carr y the TV.
✎
Make sure to distinguish between the front and back of the stand when assembling them.
✎
To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the
✎
upper left of right sides of the TV.
Step 2. Fasten two screws at position 1 and then fasten two screw at position 2.
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to
✎
one side.
Rear
Assembling the Cables ¦
Enclose the cables in the Cable tie so that the cables are not visible through the transparent
stand.
Overly rigid or thick cables can damage input jacks over long term use.
Cable tie
Using the remote control buttons ¦
Displays the favourites channel list.
Returns to the previous menu
MENU Button
RETURN Button
ENTERE / Direction Button
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.
EXIT Button
Exit the on-screen menu
English - 2