Samsung LE40A330J1 User Manual

Связывайтесь с SAMSUNG по всему миру

Если у вас есть предложения или вопросы по продуктам Samsung, связывайтесь с информационным центром Samsung.

Страна

ESTONIA 800-7267 www.samsung.ee LATVIA 800-7267 www.samsung.com/lv LITHUANIA 8-800-77777 www.samsung.lt KAZAHSTAN 8-10-800-500-55-500 www.samsung.kz KYRGYZSTAN 00-800-500-55-500 RUSSIA 8-800-555-55-55 www.samsung.ru TADJIKISTAN 8-10-800-500-55-500 UKRAINE 8-800-502-0000 www.samsung.com UZBEKISTAN 8-10-800-500-55-500 www.samsung.uz

Центр поддержки покупателей

Веб-узел

LE26A330 LE32A330 LE37A330 LE40A330

ЖК-ТЕЛЕВИЗОР

руководство пользователя

BN68-01518E-00

удивительные возможности

Благодарим за приобретение продукции компании Samsung. Для получения полного обслуживания зарегистрируйте свое устройство по адресу

www.samsung.com/global/register

Модель Серийный номер

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.(See back cover for more information)

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of

effect to the screen. Damages caused by the above effect are not covered by the Warranty.

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar

CONNECTING AND PREPARING YOUR TV

List of Parts ........................................................ 2



Installing the Stand ............................................. 2



Installing the Wall Mount Kit ............................... 2



Viewing the Control Panel .................................. 3



Viewing the Connection Panel ........................... 4



Viewing the Remote Control ............................... 6



Installing Batteries in the Remote Control .......... 7



Switching On and Off ......................................... 7



Placing Your Television in Standby Mode........... 7



Viewing the Menus ............................................. 8



Using the TOOLS Button .................................... 8



Plug & Play ......................................................... 9



SETTING THE CHANNELS

Storing Channels Automatically ....................... 10



Storing Channels Manually ...............................11



Adding / Locking Channels .............................. 12



Sorting the Stored Channels ............................ 13



Assigning Channels Names ............................. 13



Fine Tuning Channel Reception ....................... 14



LNA (Low Noise Amplier) ............................... 14



SETTING THE PICTURE

Changing the Picture Standard ........................ 15



Adjusting the Custom Picture ........................... 16



Resetting the Picture Settings to the Factory



Defaults ............................................................ 17

Changing the Picture Options .......................... 18



Viewing the Picture In Picture (PIP) ................. 20



SETTING THE SOUND

Sound Features ................................................ 21



Selecting the Sound Mode ............................... 22



SETTING THE TIME

Setting and Displaying the Current Time .......... 23



Setting the Sleep Timer .................................... 23



Switching the Television On and Off Automatically



... 24

FUNCTION DESCRIPTION

Choosing Your Language ................................. 24



Melody / Energy Saving .................................. 25



Selecting the Source ........................................ 26



Editing the Input Source Names ...................... 27



SETTING THE PC

Setting up Your PC Software



(Based on Windows XP) .................................. 28

Display Modes .................................................. 28



Setting up the TV with your PC ........................ 29



RECOMMENDATIONS FOR USE

Teletext Feature ............................................... 30



Using the Anti-Theft Kensington Lock



(depending on the model) ................................ 31

Troubleshooting: Before Contacting Service



Personnel ......................................................... 32

Technical and Environmental Specications ... 33



English

Symbol Press Note One-Touch

Button

English - 1

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

M4XL16

Remote Control &

Batteries

(AAA x 2)



Owner’s Instructions

Warranty card / Safety Guide /

➣

The stand and stand screw may not be included depending on the model.

➣

Power Cord Cover-Bottom Stand Screw X 4 Stand Cleaning Cloth



Warranty card

Registration Cards (Not available in all locations)



Safety Guide

Installing the Stand



Registration Cards

1. Connect your LCD TV and the stand. Two or more people should carry the TV.

➣

Make sure to distinguish between the front and back of the stand when assembling them.

➣

2. Fasten two screws at position 1 and then fasten two screw at position 2. Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed

➣

down, it may lean to one side. The stand is installed for models with the screen size of 37 inch and above.

➣

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

Remove the stand and cover the bottom hole with a

➣

cap and fasten with two screws.

English - 2

Viewing the Control Panel

6 55

The product colour and shape may vary depending on the model.

Side Panel buttons

1 SOURCE

Toggles between all the available input

sources (TV, Ext., AV, Component, PC, HDMI1, HDMI2). In the on-screen menu, use this button as you use the ENTER button on the remote control.

2 MENU Press to see an on-screen menu of your TV’s features.

3 Press to decrease or increase the volume. In the on-screen menu, use the buttons as you use the ◄ and ► buttons on the remote control.

4 Press to change channels. In the on-screen

menu, use the buttons as you use the ▲ and ▼ buttons on the remote control. (Without the Remote Control, you can turn on the TV by using the Channel buttons.)

English - 3

5 Speakers 6 (Power)

Press to turn the TV on and off. Remote Control Sensor

Aim the remote control towards this spot on the TV.

Power Indicator Blinks and turns off when the power is on and lights up in stand-by mode.

21 3 5 64

5 3

8 97

Viewing the Connection Panel

Power Input

The product colour and shape may vary depending on the model.

➣

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

➣

When connecting an external device, match the colour of the connection terminal to the cable.

➣

English - 4

Power Input

1 PC IN [PC] / [AUDIO]

Connect to the video and audio output jack on your PC.

2 COMPONENT IN

Connect component video cables (optional) to component connector (“PR”, “PB”, “Y”) on the rear of your set and the other ends to corresponding component video out connectors on the DVD.

If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the DVD to component connector (“PR”, “PB”, “Y”) on your set.

The PR, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of your set and the other ends to corresponding audio out connectors on the DVD

3 HDMI IN 1, HDMI IN 2

Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)

No additional Audio connection is needed for an HDMI to HDMI connection.

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

➣

What is HDMI?

“High Denition Multimedia interface” allows the transmission of high denition digital video data

and multiple channels of digital audio.

The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

DVI IN(HDMI2) [R-AUDIO-L]

DVI audio outputs for external devices.

➣

Supported modes for HDMI/DVI and Component

HDMI/DVI 50Hz

HDMI/DVI 60Hz

Component O O O O O O

480i 480p 576i 576p 720p 1080i

X X X O O O

X O X X O O

4 AUDIO OUT [R-AUDIO-L]

Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends

to corresponding audio in connectors on the Amplier or DVD Home Theatre.

5 ANT IN To view television channels correctly, a signal must be received by the set from one of the following

sources:

An outdoor aerial / A cable television network / A satellite network

6 SERVICE

Connector for SERVICE only.

7 EXT

Connector

EXT

Video Audio (L/R) RGB Video + Audio (L/R)

Input Output

O O O

Only TV output is available.

-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

English - 5

TOOLS

P.SIZE

8 AV IN [VIDEO]/[R-AUDIO-L]

Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio

out connectors on the A/V device.

9 Kensington Lock (depending on the model)

The Kensington Lock (optional) is a device used to physically x the system when used in a public

place. If you want to use a locking device, contact the dealer where you purchased the TV.

The location of the Kensington Lock may be different depending on its model.

Viewing the Remote Control

1 Television Standby button 2 Selects the TV mode directly 3 Number buttons for direct

channel access

One/Two-digit channel

selection

5 +: Volume increase

: Volume decrease

6 Temporary sound switch-off 7 Use to quickly select

frequently used functions.

8 Use to see information on the current broadcast

9 Colour buttons : Use these buttons in the

Channel list, etc.

! Displays the Channel List on

screen

@ Available source selection # Previous channel $ P : Next channel

P : Previous channel % Returns to the previous

menu ^ Control the cursor in the

& Exit the on-screen menu * Picture size selection ( Displays the main on-screen

) Selects the HDMI mode

directly.

a Picture effect selection

Teletext Functions

2 Exit from the teletext display 7 Teletext size selection 8 Teletext reveal 9 Fastext topic selection 0 Alternately select Teletext,

Double, or Mix.

! Teletext store @ Teletext mode selection

(LIST/FLOF)

# Teletext sub page $ P : Teletext next page

P : Teletext previous page

% Teletext hold & Teletext cancel ( Teletext index

The performance of the remote control may be affected by bright light.

➣

English - 6

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the

figure.

2. Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the

➣

diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t

➣

be using the remote control for a long time.

If the remote control doesn’t work, check the following:

➣

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special uorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on your set.

➣

2. Press the button on your set.

You also can press the POWER button or the TV button on the remote control to turn the TV

➣

on. The channel that you were watching last is reselected automatically

➣

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or

button on your set.

When you switch the set on for the very rst time, you will be asked to choose language in which the

➣

menus are to be displayed.

4. To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER button on the remote control.

The screen is turned off and a red standby indicator appears on your set.

➣

2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV button or channel up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday,

➣

for example). It is best to unplug the set from the mains and aerial.

English - 7

Viewing the Menus

TOOLS

P.SIZE

TOOLS

1. With the power on, press the MENU button. The main menu appears on the screen. The menu’ s left side has icons: Picture, Sound, Channel, Setup, Input.

2. Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER button to access the icon’s sub-

menu.

3. Press the EXIT button to exit.

The on-screen menus disappear from the screen after about one minute.

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu change depending on which external input mode you are viewing.

1. Press the TOOLS button.

The “Tools” menu will appear.

2. Press the ▲ or ▼ button to select a menu.

3. Press the ▲/▼/◄/►/ENTER buttons to display, change, or

use the selected items. For a more detailed description of each function, refer to the corresponding page.

• Picture Mode, see page 15

• Sound Mode, see page 21

• Sleep Timer, see page 23

• SRS TS XT, see page 21

• Energy Saving, see page 25

• Dual l-ll, see page 22

• PIP, see page 20

• Auto Adjustment, see page 29

Mode : Standard  Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50

Tint G 50 R 50

Picture Options  Reset : OK 

Move Enter Return

Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono

Move Enter Exit

Picture

Tools

English - 8

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.

1. Press the POWER button on the remote control.

The message "Запуск Plug & Play" is displayed with "OK"

selected.

2. Select the appropriate language by pressing the ▲ or

▼

button. Press the ENTER button to confirm your choice.

3. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button.

We recommend setting the TV to "Home Use" mode for the best picture in your home

environment.

"Store Demo" mode is only intended for use in retail environments. If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”

(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

4. The message "Check antenna input." is displayed with "OK" selected.

Press the ENTER button. Please check that the antenna cable is connected correctly.

5. Select the appropriate country by pressing the ▲ or ▼ button.

Press the ENTER button to confirm your choice.

The "Auto Store" menu is displayed with the "Start" selected. Press the

ENTER button.

The channel search will start and end automatically. After all the available channels are stored, the "Clock Set" menu appears. Press the ENTER button at any time to interrupt the memorization process.

7. Press the ENTER button.

Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ◄ or ► button. Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ▲ or ▼ button. You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons

on the remote control.

8. Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed. When you have finished, press the ENTER button.

Even if the ENTER button is not pressed, the message will automatically disappear after

several seconds.

 Language  Country  Auto Store  Clock Set

: Select your language.

: Select your country.

: Automatically scans for and stores channels available in the local area.

: Sets the current time for the TV clock.

Plug & Play

Запуск Plug & Play

Вход

English - 9

If you want to reset this feature...

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup" then press the

ENTER button.

2. Press the ENTER button again, to select "Plug & Play".

Plug & Play  Language : English  Time  Melody : Off  Energy Saving : Off 

PIP 

For further details on setting up options, refer to the page 9.

The “Plug & Play” feature is only available in the TV mode.

➣

Move Enter Return

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER button.

2. Press the ENTER button to select "Country".

3. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.

4. Press the ▲ or ▼ button to select "Auto Store", then press the ENTER button.

5. Press the ENTER button.

The TV will begin memorizing all of the available channels.

➣

Press the ENTER button at any time to interrupt the memorization process and return to the

➣

"Channel" menu.

6. After all the available channels are stored, the "Sort" menu appears. (refer to page 13)

Country : Belgium  Auto Store  Manual Store  Channel Manager  Sort  Name  Fine Tune  LNA : Off 

Move Enter Return

Setup

Channel

English - 10

Storing Channels Manually

You can store television channels, including those received via cable networks. When storing channels manually, you can choose:

♦ Whether or not to store each of the channels found. ♦ The programme number of each stored channel which you wish

to identify.

Country : Belgium  Auto Store  Manual Store  Channel Manager  Sort  Name  Fine Tune  LNA : Off 

Channel

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Manual Store", then press the ENTER button.

3. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

Move Enter Return

Programme : P 1 Colour System : Auto  Sound System : BG  Channel : S 6 Search : 140 MHz Store : ?

Manual Store

4. When you are satisfied with your setting, press the ENTER button.

Press the EXIT button to exit.

Move Enter Return

♦ Programme (Programme number to be assigned to a channel)

− Press the ▲ or ▼ button until you find the correct number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

♦ Colour System: Auto/PAL/SECAM/NTSC4.43

− Press the ▲ or ▼ button to select the required colour standard.

♦ Sound System: BG/DK/I/L

− Press the ▲ or ▼ button to select the required sound standard.

♦ Channel (When you know the number of the channel to be stored)

− Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).

− Press the ► button, then press the ▲ or ▼ button to select the required number.

You can also select the channel number directly by pressing the numeric buttons (0~9). If there is abnormal sound or no sound, re-select the sound standard required.

♦ Search (When you do not know the channel numbers)

− Press the ▲ or ▼ button to start the search.

− The tuner scans the frequency range until the first channel or the channel that you selected is

received on the screen.

♦ Store (When you store the channel and associated programme number)

− Set to "OK" by pressing the ENTER button.

Channel mode

− P (Programme mode): When completing tuning, the broadcasting stations in your area have been

assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.

− C (Air channel mode): You can select a channel by entering the assigned number to each air

broadcasting station in this mode.

− S (Cable channel mode): You can select a channel by entering the assigned number for each

cable channel in this mode.

English - 11

Adding / Locking Channels

TOOLS

P.SIZE

Using the Channel Manager, you can conveniently lock or add channels.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER button.

Country : Belgium  Auto Store  Manual Store  Channel Manager  Sort  Name  Fine Tune  LNA : Off 

2. Press the ▲ or ▼ button to select "Channel Manager", then press the ENTER button.

♦ Adding channels

Using the Channel List, you can add channels.

3. Select "Channel List" by pressing the ENTER button.

Move Enter Return

Channel Manager

Channel List  Child Lock : Off 

4. Move to the ( ) field by pressing the ▲, ▼, ◄ or ►

button, select a channel to be added, and press the

ENTER button to add the channel.

If you press the ENTER button again, the ( ) symbol

➣

next to the channel disappears and the channel is not added.

" " is active when "Child Lock" is selected to "On".

➣

♦ Locking channels

This feature allows you to prevent unauthorized users, such

as children, from watching unsuitable programmes by muting out video and audio.

5. Press the ▲ or ▼ button to select "Child Lock", then press the ENTER button.

6. Select "On" by pressing the ▲ or ▼ button, then press the

ENTER button.

7. Press the ▲ or ▼ button to select "Channel List", then press the ENTER button.

8. Move to the " " field by pressing the ▲, ▼, ◄ or ► button,

select a channel to be locked, and press the ENTER button.

If you press the ENTER button again, the ( ) symbol

➣

next to the channel disappears and the channel lock is

Move Enter Return

Channel List

P 1 C3

Prog.

0 C--

1 C3

2 BBC 1

3 C74

4 C75

5 C76

6 S3

7 S4

8 S6

9 S7

Add Lock

Move Enter

Page Return

cancelled. A blue screen is displayed when "Child Lock" is activated.

➣

9. Press the EXIT button to exit.

Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on " " to be active

➣

or inactive.

Channel

1 / 10

You can select these options by simply pressing the CH LIST

button on the remote control.

English - 12

Sorting the Stored Channels

This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Sort", then press the

ENTER button.

3. Select the channel number that you wish to change by

pressing the ▲ or ▼ button. Press the

➣

ENTER

button. The selected channel number and name are moved to right side.

4. Select the number of the programme to which the channel is to

be moved by pressing the ▲ or ▼ button.

5. Press the

ENTER

button. The channel is moved to its new

position and all other channels are shifted accordingly.

6. Repeat steps 3 to 5 for another channel to be sorted.

7. Press the EXIT button to exit.

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Name", then press the ENTER button.

3. If necessary, select the channel to be assigned to a new

name by pressing the ▲ or ▼ button. Press the ENTER button.

The selection bar is displayed around the name box.

➣

To...

Select a letter, number or symbol

Move on the next letter

Move back the previous letter

Confirm the name

The following characters are available: Letters of the alphabet (A~Z) / Numbers

➣

(0~9) / Special characters (+, -, *, /, space)

5. Repeat steps 3 to 4 for each channel to be assigned to a new name.

6. Press the EXIT button to exit.

Then...

Press the ▲ or ▼ button Press the ► button Press the ◄ button

Press the ENTER button

Country : Belgium  Auto Store  Manual Store  Channel Manager  Sort  Name  Fine Tune  LNA : Off 

Move Enter Return

Prog. Ch. Name  0 C-- ---- 1 C23 -----  2 S06 ---- 3 S07 ---- 4 S09 ---- 5 S12 ---- 6 S13 ---- 7 S14 ---- 8 S17 ---- 9 C21 ---- 

Move Enter Return

Country : Belgium  Auto Store  Manual Store  Channel Manager  Sort  Name  Fine Tune  LNA : Off 

Move Enter Return

Prog. Ch. Name  0 C-- -----

1 C23 -----

2 S06 ---- 3 S07 ---- 4 S09 ---- 5 S12 ---- 6 S13 ---- 7 S14 ---- 8 S17 ---- 9 C21 ---- 

Move Enter Return

Channel

Sort

Name

English - 13

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.

1. Use the number buttons to directly select the channel that

you want to fine tune.

2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the

ENTER button.

3. Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER button.

4. Press the ◄ or ► button to adjust the fine tuning. Press the ENTER button.

5. Press the EXIT button to exit.

Fine tuned channels that have been saved are marked

➣

with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red. To reset the ne-tuning, select "Reset" by pressing the

➣

▲

or ▼ button and then press the ENTER button.

LNA (Low Noise Amplier)

If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal).

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "LNA", then press the ENTER button.

3. Press the ▲ or ▼ button to select "Off" or "On". Press the ENTER button.

4. Press the EXIT button to exit.

Country : Belgium  Auto Store  Manual Store  Channel Manager  Sort  Name  Fine Tune  LNA : Off 

Move Enter Return

P 1

Adjust Save Return

Country : Belgium  Auto Store  Manual Store  Channel Manager  Sort  Name  Fine Tune  LNA : Off 

Move Enter Return

Country : Belgium Auto Store Manual Store Channel Manager Sort Name Fine Tune

LNA : Off

Channel

Fine Tune

Reset

Channel

Off

English - 14

Move Enter Return

Changing the Picture Standard

TOOLS

P.SIZE

You can select the type of picture which best corresponds to your viewing requirements.

1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture".

2. Press the ENTER button again, to select "Mode".

3. Press the ▲ or ▼ button to select the desired picture effect. Press the ENTER button.

4. Press the EXIT button to exit.

♦ Dynamic: Selects the picture for high-definition in a bright

room.

♦ Standard: Selects the picture for optimum display in a

normal environment.

♦ Movie: Selects the picture for comfortable display in a

dark room.

The Picture mode must be adjusted separately for each

input source.

You can also press the P.MODE button on the remote control

to select one of the picture settings.

Easy Setting

1. Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select "Picture Mode".

3. Press the ◄ or ► button to select the required option.

4. Press the EXIT or TOOLS button to exit.

Mode : Standard  Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50

Tint G 50 R 50

Picture Options  Reset : OK 

Move Enter Return

Mode : Standard

Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50

Tint G 50 R 50

Picture Options Reset : OK

Move Enter Return

Picture Mode ◄ Standard ►

Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono

Tools

Picture

Dynamic

Standard

Movie

Move Adjust Exit

English - 15

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

1. To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

(On page 15)

2. Press the ▲ or ▼ button to select a particular item. Press the

ENTER button.

3. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button.

4. Press the EXIT button to exit.

♦ Backlight: Adjusts the screen brightness by adjusting the

LCD backlight brightness. (0~10)

♦ Contrast: Adjusts the lightness and darkness between

objects and the background.

♦ Brightness: Adjusts the brightness of the whole screen. ♦ Sharpness: Adjusts the outline of objects to either

sharpen them or make them more dull.

♦ Colour: Adjusts the colours, making them lighter or

darker.

♦ Tint:

Adjusts the colour of objects, making them more red or green for a more natural look.

The adjusted values are stored according to the selected Picture mode.

In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness". (26, 32, 37 inch)

In PC mode, you can only make changes to "Contrast" and "Brightness". (40 inch)

In TV, Ext., AV modes of the PAL system, you cannot use the "Tint" Function. You can return to the factory defaults picture settings by selecting the "Reset".

(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 17)

The energy consumed during use can be significantly reduced if the level of brightness of the picture

is reduced, and that this will reduce the overall running cost.

Mode : Standard  Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50

Tint G 50 R 50

Picture Options  Reset : OK 

Move Enter Return

▲

Backlight

▼

Move Adjust Return

Picture

English - 16

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.

1. To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3 on page 15.

2. Press the ▲ or ▼ button to select "Reset", then press the ENTER button.

3. Press the ▲ or ▼ button to select "OK" or "Cancel".

Press the ENTER button.

4. Press the EXIT button to exit.

The "Reset" will be set for each Picture mode.

Mode : Standard Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50

Tint G 50 R 50

Picture Options

Reset : OK

Move Enter Return

Picture

Cancel

English - 17

Changing the Picture Options

TOOLS

P.SIZE

1. Press the MENU button to display the menu.

Press the ENTER button, to select "Picture".

2. Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER button.

3. Select the required option by pressing the ▲ or ▼ button,

then press the ENTER button.

4. When you are satisfied with your setting, press the

ENTER button.

5. Press the EXIT button to exit.

➣

In PC mode, you can only make changes to the “Colour Tone” and “Size” from among the items in “Picture Options”.

♦ Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2 You can select the most comfortable colour tone to your eyes.

The adjusted values are stored according to the selected

➣

Picture mode.

“Warm1” or “Warm2” is only activated when the picture mode is "Movie".

➣

♦ Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan

You can select the picture size which best corresponds to your viewing requirements.

♦ Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio. ♦ 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. ♦ Wide Zoom: Magnify the size of the picture more than 4:3. ♦ Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size. ♦ 4:3: This is the default setting for a video movie or normal broadcasting. ♦ Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i) or

Component (1080i) signals are input.

"Auto Wide" function is available only in "TV", "Ext." and "AV" mode.

➣

In PC Mode, only "16:9" and "4:3" mode can be adjusted.

➣

Settings can be adjusted and stored for each external device you have connected to an input of

➣

the TV. Temporary image retention may occur when viewing a static image on the set for more than two

➣

hours. When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.

➣

Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting the by

➣

pressing the ► or ENTER button.

Zoom: Select by pressing the ◄ or ►button.

➣

Use the ▲ or ▼button to move the picture up and down. After selecting , use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.

After selecting “Just Scan” in HDMI (1080i) or Component (1080i) mode:

➣

Select by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture. Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button. You can initialize the setting.

O You can select these options by simply pressing the P.SIZE

button on the remote control.

Mode : Standard  Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50

Tint G 50 R 50

Picture Options  Reset : OK 

Move Enter Return

Colour Tone : Normal  Size : Auto Wide  Screen Mode : 16:9  Digital NR : Auto 

HDMI Black Level

Move Enter Return

Picture

Picture Options

: Normal 

English - 18

♦ Screen Mode

: 16:9/ Wide Zoom/Zoom/4:3

When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size

you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it.

♦ 16:9: Sets the picture to 16:9 wide mode ♦ Wide Zoom: Magnify the size of the picture more than 4:3. ♦ Zoom: Magnify the size of the picture vertically on screen. ♦ 4:3: Sets the picture to 4:3 normal mode.

This function is available in "Auto Wide" mode. This function is not available in “PC”, "Component" or "HDMI" mode.

♦

Digital NR: Off/Low/Medium/High/Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction

feature to help reduce any static and ghosting that may appear on the screen.

When the signal is weak, select one of the other options until the best picture is displayed.

♦ HDMI Black Level: Normal/Low You can select the black level on the screen to adjust the screen depth.

This function is active only when the external input connects to HDMI(RGB signals).

English - 19

Viewing the Picture In Picture (PIP)

You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "PIP", then press the ENTER button.

3. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

4. When you are satised with your setting, press the ENTER button.

5. Press the EXIT button to exit.

You may notice that the picture in the PIP window becomes

➣

slightly unnatural when you use the main screen to view a game or karaoke.

Plug & Play 

Language : English  Time  Melody : Off  Energy Saving : Off  PIP 

Move Enter Return

PIP : On  Source : TV 

Size : 

Position :  Programme : P1 

Setup

PIP

Easy Setting

1. Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select “PIP”, then press the

ENTER button.

3. Press the ▲ or ▼ button to select a particular item.

4. Press the ◄ or ► button to select the required option.

5. Press the EXIT or TOOLS button to exit.

PIP: On/Off

♦

You can activate or deactivate the PIP function.

Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off PIP

Move Enter Exit

Main picture Sub picture Component TV, Ext., AV HDMI 1, 2 TV, Ext., AV PC TV, Ext., AV

Source

♦

PIP  On  Source : TV

Size :

Position : Programme : P1

You can select a source of the sub-picture.

Size: / /

♦

You can select a size of the sub-picture.

If main picture is in "HDMI" mode, "Size" is available.

➣

Position: / / /

♦

Move Adjust Return

You can select a position of the sub-picture.

In Double ( , ) mode, "Position" cannot be selected.

➣

Programme

♦

You can select a channel of the sub-picture only when the "Source" is set to "TV".

Move Enter Return

Tools

PIP

English - 20

Sound Features

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Sound", then press the

ENTER button.

2. Select the required option by pressing the ▲ or ▼ button,

Mode : Custom  Equalizer  SRS TS XT : Off  Auto Volume : Off  TV Speaker : On 

Sound Select : Main 

Sound

then press the ENTER button.

3. When you are satisfied with your setting, press the ENTER

button.

4. Press the EXIT button to exit.

♦ Mode: Standard/Music/Movie/Speech/Custom

You can select the type of special sound effect to be used

when watching a given broadcast.

Easy Setting

1. Press the TOOLS button on the remote control.

Move Enter Return

Tools

Picture Mode : Standard

Sound Mode ◄ Custom ►

Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono

2. Press the ▲ or ▼ button to select "Sound Mode".

3. Press the ◄ or ► button to select the desired sound mode.

4. Press the EXIT or TOOLS button to exit.

Move Adjust Exit

♦ Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz

The sound settings can be adjusted to suit your personal

Equalizer

preferences.

If you make any changes to these settings, the sound

➣

mode is automatically switched to "Custom".

Balance 100Hz 300Hz 1kHz 3kHz 10kHz

Move Adjust Return

♦ SRS TS XT: Off/On

TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel

content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

Easy Setting

1. Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select "SRS TS XT".

3. Press the ◄ or ► button to select the "Off" or "On".

4. Press the EXIT or TOOLS button to exit.

TruSurround XT, SRS and Symbol are trademarks of SRS Labs,

Inc.TruSurround XT technology is incorporated under license from SRS Labs, Inc.

English - 21

Tools

Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off

SRS TS XT ◄ Off ►

Energy Saving : Off Dual l-ll : Mono

Move Adjust Exit

♦ Auto Volume: Off/On

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume

every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

♦ TV Speaker: Off/On

If you want to hear the sound through separate speakers, cancel the internal amplifier.

The +, - and MUTE buttons do not operate when the "TV Speaker" is set to "Off".

➣

When "TV Speaker" is set to "Off", you can operate only “Sound Select” (in PIP mode) in Sound

➣

menu.

♦ Sound Select: Main/Sub

When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.

− Main: Used to listen to the sound of the main picture.

− Sub: Used to listen to the sound of the sub picture.

Selecting the Sound Mode

You can set the sound mode in the TOOLS menu. When you set to "Dual I-II", the current sound mode is displayed on the screen.

1. Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select “Dual I-II".

Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off

Dual l-ll ◄ Mono ►

3. Press the ◄ or ► button to select required option.

4. Press the ENTER button.

Stereo

NICAM

Stereo

Audio Type Dual

Mono MONO

Stereo STEREO

Dual DUAL

Mono MONO

Stereo MONO

Dual

MONO

↔

1 ↔

↔

DUAL

1/2

MONO

DUAL

STEREO

DUAL

Default

Automatic

change DUAL 1

Automatic

change

DUAL 1

Move Adjust Exit

If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. This function is only activated in stereo sound signal. It is deactivated in mono sound signal. This function is only available in TV mode.

Tools

English - 22

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.

1. Press the MENU button to display the menu.

Plug & Play  Language : English  Time  Melody : Off  Energy Saving : Off 

PIP 

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Time", then press the

ENTER button.

3. Press the ENTER button to select "Clock Set".

To... Press the...

Move to "Month", "Day", "Year", "Hour" or "Minute" Set the "Month", "Day", "Year", "Hour" or "Minute"

Confirm the setting

◄ or ► button.

▲ or ▼ button.

ENTER button.

5. Press the EXIT button to exit.

Move Enter Return

Month01Day

Hour00Minute

Move Adjust Return

If you disconnect the power cord, you have to set the clock again. You can also set "Year", "Month", "Day", "Hour" and "Minute" by pressing the number buttons on

the remote control.

Setting the Sleep Timer

You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Time", then press the

ENTER button.

3. Press the ▲ or ▼ button to select "Sleep Timer", then press

the ENTER button.

4. Press the ▲ or ▼ button repeatedly until the desired time

appears (Off, 30, 60, 90, 120, 150, 180). Press the ENTER button.

5. Press the EXIT button to exit.

The TV automatically switches to standby mode when the

timer reaches 0.

Easy Setting

1. Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select “Sleep Timer”.

3. Press the ◄ or ► button to select the minute.

4. Press the EXIT or TOOLS button to exit.

Plug & Play  Language : English  Time  Melody : Off  Energy Saving : Off 

PIP 

Move Enter Return

Clock Set : 00 : 00

Sleep Timer :

Timer 1 : Timer 2 : Timer 3 :

Move Enter Return

Tools

Picture Mode : Standard Sound Mode : Custom

Sleep Timer ◄ Off ►

SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono

Setup

Clock Set

Setup

Time

Year

2008

Off

30 60

90 120 150 180

English - 23

Move Adjust Exit

Switching the Television On and Off Automatically

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Time", then press the ENTER button.

Plug & Play  Language : English  Time  Melody : Off  Energy Saving : Off 

PIP 

3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",

"Timer 3", then press the ENTER button. Three different On/Off Timer Settings can be made.

You must set the clock first.

➣

4. Press the ◄ or ► button to select the required item below. Press the ▲ or ▼ button to adjust to the setting satisfied.

♦ On Time: Select hour, minute, and "On"/"Off". (To activate

timer with the setting satisfied, set to "On".)

♦ Off Time: Select hour, minute, and "On"/"Off". (To activate

timer with the setting satisfied, set to "On".)

♦ Repeat: Select "Once", "Everyday", "Mon~Fri", "Mon~Sat",

Move Enter Return

On Time

00 00 Off

Off Time

00 Off

Repeat

Once

Volume

► Move Adjust Return

Timer 1

or "Sat~Sun".

♦ Volume: Select the desired turn on volume level.

You can set the hour and minute directly by pressing the number buttons on the remote control. Auto Power Off

When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time.

Choosing Your Language

Setup

When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.

1. Press the MENU button to display the on-screen menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Language", then press the ENTER button.

3. Select a particular language by pressing the ▲ or ▼ button

repeatedly. Press the ENTER button.

4. Press the EXIT button to exit.

English - 24

Plug & Play  Language : English  Time  Melody : Off  Energy Saving : Off 

PIP 

Move Enter Return

Setup

Melody / Energy Saving

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2. Select the required option by pressing the ▲ or ▼ button,

Plug & Play  Language : English  Time  Melody : Off  Energy Saving : Off 

PIP 

Setup

then press the ENTER button.

3. When you are satisfied with your setting, press the

ENTER button.

4. Press the EXIT button to exit.

Move Enter Return

♦ Melody: Off/Low/Medium/High

The TV power on/off melody sound can be adjusted.

The Melody does not play

➣

- When no sound is output from the TV because the MUTE button has been pressed

- When no sound is output from the TV because the (Volume) button has been pressed

- When the TV is turned off by Sleep Timer function.

♦ Energy Saving: Off/Low/Medium/High

This feature adjusts the screen brightness depending on the surrounding lighting conditions.

− Off: Turns off the energy saving function.

− Low: Sets the TV to low energy saving mode.

− Medium: Sets the TV to medium energy saving mode.

− High: Sets the TV to high energy saving mode.

Easy Setting

1. Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select “Energy Saving”.

3. Press the ◄ or ► button to select the "Off", "Low",

"Medium" or "High".

4. Press the EXIT or TOOLS button to exit.

Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off

Energy Saving ◄ Off ►

Dual l-ll : Mono

Tools

This function is not available in “PC” mode.(40 inch)

English - 25

Move Adjust Exit

Selecting the Source

TOOLS

P.SIZE

You can select among external sources connected to your TV’s input jacks.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Input", then press the

ENTER button.

2. Press the ENTER button again, to select "Source List".

Available signal sources: TV, Ext., AV, Component, PC,

HDMI1, HDMI2.

You can choose only those external devices that are

connected to the TV.

3. Select the required device by pressing the ▲ or ▼ button. Press the ENTER button.

O Press the SOURCE button on the remote control to toggle

between all the available source. TV mode can be selected by pressing the TV button, number buttons(0~9), and the P / button on the remote control.

Source List : TV  Edit Name 

Move Enter Return

Ext. : ----

AV : ---Component : ---PC : ---HDMI1 : ---HDMI2 : ----

Source List

Move Enter Return

Input

O You can also watch HDMI mode simply by pressing the HDMI

button on the remote control.

English - 26

Editing the Input Source Names

Name the device connected to the input jacks to make your input source selection easier.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Input", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Edit Name", then press

the ENTER button.

3. Press the ▲ or ▼ button to select the device that you wish to

edit. Press the ENTER button.

4. Press the ▲ or ▼ button to select the required device.

Press the ENTER button.

5. Press the EXIT button to exit.

Source List : TV  Edit Name 

Move Enter Return

Ext. : ----

AV : ---- Component : ---- PC : ---- HDMI1 : ---- HDMI2 : ----

Edit Name

Move Enter Return

Input

----

VCR DVD

Cable STB

Satellite STB

PVR STB

AV Receiver

Game

English - 27

Setting up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1. First, click on "Control Panel" on the Windows start menu.

2. When the control panel window appears, click on "Appearance and Themes"

and a display dialog-box will appear.

3. When the control panel window appears, click on "Display" and a display dialog-box will appear.

4. Navigate to the "Settings" tab on the display dialog-box.

The correct size setting (resolution): Optimum- 1360 X 768 If a vertical-frequency option exists on your display settings dialog box, the correct value is "60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended.

D-Sub Input

Mode

IBM

VESA

HDMI/DVI Input

Mode

VESA

Resolution

640x350 720×400

640×480 640×480 640×480 800×600 800×600

800×600 1024×768 1024×768 1024×768

1360 x 768

Resolution

640×480

800×600 1024×768

1360 x 768

Horizontal

Frequency (kHz)

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

47.712

Horizontal

Frequency (kHz)

31.469

37.879

48.363

47.712

Vertical

Frequency (Hz)

70.086

70.087

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

60.015

Vertical

Frequency (Hz)

59.940

60.317

60.004

60.015

Pixel Clock

Frequency (MHz)

25.175

28.322

25.175

31.500

40.000

50.000

49.500

65.000

75.000

78.750

85.500

Pixel Clock

Frequency (MHz)

25.175

40.000

65.000

85.500

Sync Polarity

(H/V)

+/-

-/+

-/-

-/+/+ +/+ +/+

-/-

-/+/+ +/+

(H/V)

-/-

+/+

-/-

+/+

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

➣

The interlace mode is not supported.

➣

The set might operate abnormally if a non-standard video format is selected.

➣

Separate and Composite modes are supported. SOG is not supported.

➣

English - 28

+ 76 hidden pages

Samsung LE40A330J1 User Manual

Contents

List of Parts

Installing the Stand

Installing the Wall Mount Kit

Viewing the Control Panel

Viewing the Connection Panel

Viewing the Remote Control

Installing Batteries in the Remote Control

Switching On and Off

Placing Your Television in Standby Mode

Viewing the Menus

Using the TOOLS Button

Plug & Play

Storing Channels Automatically

Storing Channels Manually

Adding / Locking Channels

Sorting the Stored Channels

Assigning Channels Names

Fine Tuning Channel Reception

Changing the Picture Standard

Adjusting the Custom Picture

Resetting the Picture Settings to the Factory Defaults

Changing the Picture Options

Viewing the Picture In Picture (PIP)

Selecting the Sound Mode

Setting and Displaying the Current Time

Setting the Sleep Timer

Switching the Television On and Off Automatically

Choosing Your Language

Melody / Energy Saving

Selecting the Source

Editing the Input Source Names

Setting up Your PC Software (Based on Windows XP)

Display Modes