Samsung LE37S62 User Manual

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.

Kontakt zu Samsung

Falls Sie Fragen oder Anregungen zu Samsung-Produkten haben, wenden Sie sich bitte an den Samsung-Kundendienst.

Contact Samsung wereldwijd

Wanneer u suggesties of vragen heeft met betrekking tot Samsung producten, gelieve contact op te nemen met de consumenten dienst van Samsung.

Contacte con SAMSUNG WORLD-WIDE

Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente

Contacte SAMSUNG GLOBAL

Se tem algumas dúvidas ou comentários sobre os produtos Samsung, contacte por favor a nossa linha de apoio a clientes Samsung.

Contatta SAMSUNG WORLD-WIDE

Se avete commenti o domande sui prodotti Samsung, contattate il Servizio Clienti Samsung.

Country

BELGIUM 02 201 2418 www.samsung.com/be CZECH REPUBLIC 844 000 844 www.samsung.com/cz

DENMARK 70 70 19 70 www.samsung.com/dk FINLAND 030-6227 515 www.samsung.com/ FRANCE 3260 SAMSUNG(7267864) (€ 0,15/min) www.samsung.com/fr GERMANY 01805-121213 (€ 0,14/Min) www.samsung.de HUNGARY 06-80-SAMSUNG (7267864) www.samsung.com/hu ITALIA 800 SAMSUNG(7267864) www.samsung.com/it LUXEMBURG 0032 (0)2 201 24 18 www.samsung.lu NETHERLANDS 0900 20 200 88 (€ 0,10/Min) www.samsung.com/nl NORWAY 815-56 480 www.samsung.com/no POLAND 0 801 801 881 www.samsung.com/pl PORTUGAL 80 8 200 128 www.samsung.com/pt REPUBLIC OF IRELAND 0818 717 100 www.samsung.com/uk SLOVAKIA 0800-SAMSUNG (7267864) www.samsung.com/sk SPAIN 902 10 11 30 www.samsung.com/es SWEDEN 0771-400 200 www.samsung.com/se SWITZERLAND 0800-7267864 www.samsung.com/ch U.K 0870 SAMSUNG (7267864) www.samsung.com/uk ESTONIA 800-7267 www.samsung.ee LATVIA 800-7267 www.samsung.com/lv LITHUANIA 8-800-77777 www.samsung.lt KAZAKHSTAN 8 800 080 1188 www.samsung.kz RUSSIA 8-800-200-0400 www.samsung.ru UKRAINE 8-800-502-0000 www.samsung.com/ur UZBEKISTAN 140-1234 www.samsung.uz

Customer Care Centre

“Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4”

Web Site

LCD TV

LE32S62 LE37S62 LE40S62

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

PC DISPLAY

PICTURE IN PICTURE (PIP)

TELETEXT

This device is a Class B digital apparatus.

BN68-01234D-01

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Précautions à prendre lors de l’affichage d’une image fixe

Une image fixe peut causer des dommages irrémédiables à l’écran du téléviseur.

• N’affichez pas une image fixe sur l’écran LCD plus de 2 heures. Cela pourrait provoquer une rémanence de l’image à l’écran. Cette rémanence de l’image est également appelée “brûlure de l’écran”. Pour éviter une telle rémanence de l’image à l’écran, réduisez la luminosité et le contraste de l’écran lorsque vous laissez une image fixe affichée.

•

• L’affichage d’images fixes de jeux vidéo et d’ordinateurs pendant plus longtemps qu’une période spécifique peut provoquer des rémanences. Pour éviter cela, réduisez la “luminosité” et le “contraste” lors de l’affichage d’images fixes.

Vorsichtsmaßnahmen beim Anzeigen von Standbildern

Ein Standbild kann zu einer dauerhaften Beschädigung des Fernsehbildschirms führen.

• Zeigen Sie kein Standbild länger als 2 Stunden auf dem LCD-Monitor an, da das Bild auf diese Weise einbrennen kann. Das Einbrennen von Standbildern wird auch als “Bildkonservierung” bezeichnet. Sie können das Einbrennen vermeiden, indem Sie die Helligkeit und den Kontrast des Monitors beim Anzeigen von Standbildern verringern.

• Bei Wiedergabe im Format 4:3 über einen längeren Zeitraum können bedingt durch die unterschiedliche Lichtemission Nachbilder

• Die kontinuierliche Anzeige von Standbildern von Videospielen oder vom PC über einen gewissen Zeitraum hinaus kann partielle Nachbilder verursachen. Um diesen Effekt zu verhindern, verringern Sie Helligkeit und Kontrast, wenn Sie Standbilder anzeigen möchten.

Voorzorgsmaatregelen bij weergave van stilstaand beeld

Stilstaande beelden kunnen permanente schade aan uw TV-scherm toebrengen.

• Laat niet langer dan 2 uur een stilstaand beeld op het LCD-scherm staan, dat kan namelijk beeldretentie veroorzaken. Beeldretentie wordt ook wel inbranden genoemd. Verlaag bij de weergave van een stilstaand beeld de helderheid en het contrast om beeldretentie te voorkomen.

•

• Het gedurende langere tijd weergeven van stilstaande beelden van dvd’s of computerspellen kan (gedeeltelijke) scherminbranding tot gevolg hebben. Om dit te voorkomen kunt u tijdens het weergeven van stilstaande beelden de helderheid en het contrast verminderen.

Precauciones al mostrar en la pantalla una imagen fija

La imagen fija puede causar daños permanentes en la pantalla del televisor.

• No deje una imagen fija en la pantalla LCD durante más de dos horas ya que se podría producir una retención de la imagen en la pantalla. Este fenómeno de retención de imágenes también se denomina “quemadura de pantalla”. Para evitar que se produzca esa persistencia de la imagen, reduzca el nivel de luminosidad y de contraste de la pantalla cuando muestre imágenes fijas.

• El uso del televisor LCD en formato 4:3 durante un tiempo prolongado puede dejar rastros de bordes en las partes izquierda,

• Ver imágenes fijas de videojuegos y PC durante más tiempo del indicado puede producir imágenes fantasma parciales. Para evitar este efecto, reduzca el ‘brillo’ y el ‘contraste’ cuando vea imágenes fijas.

Precauções a ter quando se vêem imagens fixas

Uma imagem fixa pode danificar permanentemente o ecrã do televisor.

• Uma imagem fixa não deve permanecer no painel LCD durante mais de 2 horas ecrã porque pode provocar o efeito de retenção de imagem no ecrã. Esta retenção de imagem também é conhecida como “queimadura de ecrã”. Para evitar a retenção de imagem, diminua o grau de luminosidade e de contraste do ecrã quando visualizar uma imagem fixa.

• Utilizar o televisor LCD em formato 4:3 durante um longo período de tempo pode deixar vestígios de margens na parte esquerda,

• Visualizar imagens fixas de jogos de vídeo ou de PC durante um longo período de tempo pode produzir imagens parciais depois da visualização. Para evitar este efeito, reduza a “luminosidade” e o “contraste” quando visualizar imagens fixas.

Precauzioni da adottare quando si visualizza un’immagine fissa

Un’immagine fissa può causare danni permanenti allo schermo TV.

• Non visualizzare un’immagine fissa sul pannello LCD per oltre 2 ore poiché può causare la ritenzione dell’immagine sullo schermo. Il fenomeno di ritenzione dell’immagine è anche noto come “bruciatura dello schermo”. Per evitare il fenomeno di ritenzione dell’immagine, ridurre il grado di luminosità e di contrasto dello schermo quando si visualizza un’immagine fissa.

• Su un TV LCD, l’uso del formato 4:3 per un periodo prolungato può lasciare traccia dei bordi sulla parte sinistra, destra e

• La visualizzazione prolungata di immagini fisse da videogiochi e PC può causare la visualizzazione di immagini residue parziali. Per evitare questo problema, ridurre la ‘luminosità’ e il ‘contrasto’ mentre si visualizzano immagini fisse.

the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

Regarder l’écran LCD du téléviseur en format 4:3 pendant une longue période peut laisser des traces de bordures à gauche, à droite et au centre de l’écran, à cause de la différence d’émission de lumière sur l’écran. La lecture d’un DVD ou l’utilisation d’une console de jeu peut avoir un effet similaire sur l’écran. Les dommages provoqués par les effets qui précèdent ne sont pas couverts par la garantie.

der Ränder links, rechts und in der Mitte des Bildschirms auftreten. DVD- oder Spielekonsole-Wiedergabe können einen ähnlichen Effekt verursachen. Schäden, die durch die o. g. Effekte verursacht wurden, unterliegen nicht der Garantie.

Als u gedurende langere tijd naar uw LCD-tv kijkt terwijl het beeld in 4:3-formaat wordt weergegeven, kunnen aan de linker- en rechterkant en in het midden van het scherm randen achterblijven. Dit wordt veroorzaakt door de verschillen in lichtemissie op het scherm. Het afspelen van een dvd of een computerspel kan hetzelfde effect hebben. Schade ontstaan door het bovengenoemde effect valt niet onder de garantie.

derecha y central de la pantalla debido a las diferencias en la emisión lumínica de la pantalla. Reproducir un DVD o una videoconsola puede causar un efecto similar en la pantalla. La garantía no cubre estos daños.

direita e frontal do televisor devido a diferenças de emissão de luz do ecrã. Reproduzir um DVD ou ligar uma consola de jogos pode causar efeitos semelhantes no ecrã. Os danos causados pelo efeito acima mencionado não estão cobertos pela garantia.

centrale del video a causa delle differenti emissioni luminose dello schermo. La riproduzione di un DVD o l’uso di una console per videogiochi può causare effetti analoghi sullo schermo. Questo tipo di danni non è coperto dalla Garanzia.

CONNECTING AND PREPARING YOUR TV

List of Parts .............................................................. 2

Installing the Stand .................................................. 2

Installing the Wall Mount Kit ................................. 2

Viewing the Control Panel ....................................... 3

Viewing the Connection Panel ................................. 4

Viewing the Remote Control .................................... 6

Installing Batteries in the Remote Control ............... 6

Switching On and Off ............................................... 7

Placing Your Television in Standby Mode ................ 7

Plug & Play .............................................................. 7

SETTING THE CHANNELS

Storing Channels Automatically ............................... 8

Storing Channels Manually ...................................... 8

Setting the Channel Manager .................................. 9

Activating the Child Lock ...................................... 10

Sorting the Stored Channels.................................... 10

Assigning Channels Names ..................................... 11

Fine Tuning Channel Reception .............................. 11

SETTING THE PICTURE

Changing the Picture Standard................................ 12

Adjusting the Custom Picture .................................. 12

Changing the Colour Tone ....................................... 12

Resetting the Picture Settings to the

Factory Defaults ....................................................... 13

Changing the Picture Size ....................................... 13

Freezing the Current Picture.................................... 13

Digital Noise Reduction ........................................... 13

DNIe Demo (Digital Natural Image engine) ............. 14

Viewing the Picture In Picture (PIP) ........................ 14

SETTING THE SOUND

Changing the Sound Standard ............................. 15

Adjusting the Sound Settings ............................... 15

Setting the TruSurround XT (SRS TSXT) ............ 16

Adjusting the Volume Automatically ..................... 16

Selecting the Internal Mute................................... 16

Listening to the Sound of the Sub Picture............ 17

Resetting the Sound Settings to the

Factory Defaults ................................................... 17

Connecting Headphones ...................................... 17

SETTING THE TIME

Setting and Displaying the Current Time.............. 17

Setting the Sleep Timer ........................................ 18

Switching the Television

On and Off Automatically ...................................... 18

SETTING THE OTHERS

Choosing Your Language ..................................... 19

Using Game Mode ............................................... 19

Setting the Blue Screen Mode /

Selecting the Melody ........................................... 19

Using the Energy Saving Feature ........................ 20

Selecting the Source ............................................ 20

Editing the Input Source Names .......................... 20

USING THE TELETEXT FEATURE

Teletext Decoder................................................... 21

Displaying the Teletext Information ...................... 21

Selecting a Specific Teletext Page ....................... 22

Using Fastext to Select a Teletext Page .............. 22

SETTING THE PC

Setting up Your PC Software

(Based on Windows XP) ...................................... 23

Display Modes ...................................................... 23

Setting the PC ...................................................... 24

RECOMMENDATIONS FOR USE

Using the Anti-Theft Kensington Lock .................. 25

Troubleshooting:

Before Contacting Service Personnel .................. 25

Technical and Environmental Specifications ....... 26

English

Symbol Press Important Note One-Touch

Button

English-1

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

M4 X L16

Remote Control &

Batteries (AAA x 2)



Owner’s Instructions

Warranty card / Service Network Card / Safety Guide / Registration Cards (Not available in all locations) The stand and stand screw may not be included depending on the model.

Power Cord Cover-Bottom Stand Screw

 Warranty card 

Service Network Card

Stand Cleaning Cloth

 Safety Guide  Registration Cards

Installing the Stand

< 2 > < 3 >

1. Place the TV faced down on a soft cloth or cushion on a table.

2. Put the stand into the hole at the bottom of the TV.

3. Insert screw into the hole indicated and tighten.

The stand is installed for models with the screen size of 40 inch and above.

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Remove the stand and cover the bottom hole with a cap and fasten with two screws.

English-2

Viewing the Control Panel

The product colour and shape may vary depending on the model.

SOURCE

Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI). In the on-screen menu, use this button as you use the ENTER button on the remote control.

Press to see an on-screen menu of your TV’s features.

Press to decrease or increase the volume. In the on-screen menu, use the buttons as you use the  and  buttons on the remote control.

(

Power)

Press to change channels.

In the on-screen menu, use the as you use the  and  buttons on the remote control. (Without the Remote Control, you can turn on the TV by using the Channel buttons.)

Speakers

Remote Control Sensor

Aim the remote control towards this spot on the TV.

Press to turn the TV on and off.

Power Indicator Blinks and turns off when the power is on and lights

up in stand-by mode.

English-3

buttons

Viewing the Connection Panel

Power Input

Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.

English-4

Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial / A cable television network / A satellite network

Connecting HDMI/DVI

Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs).

- No additional Audio connection is needed for an HDMI to HDMI connection. What is HDMI?

- “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple

channels of digital audio ( 5.1 channels).

- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).

The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio. You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R - AUDIO - L” terminal on DVI for sound output.

- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that

it has been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture.

Supported modes for DVI or HDMI

- Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card.

(This will result in a blank screen being displayed)

- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD)

and connect the VCR (or DVD) to your set.

connectors on the Amplifier or DVD Home Theater.

- Connect the stereo audio cable (optional) to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the

sound card on your computer.

- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out

connectors on the A/V device.

- Headphone may be connected to the headphone output ( ) on the rear of your set. While the headphone is connected,

the sound from the built-in speakers will be disabled.

ends to corresponding component video out connectors on the DTV or DVD.

- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)

and connect the DTV (or DVD) to component connector (“PR”, “PB”, “Y”) on your set.

- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio

out connectors on the DTV or DVD.

- This LCD TV displays its optimum picture resolution in 720p mode.

- This LCD TV displays its maximum picture resolution in 1080i mode.

- If you want to use a locking device, contact the dealer where you purchased the TV.

50Hz 60Hz Component

Connecting Set-Top Box, VCR or DVD

Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.

SERVICE

- Service connection for qualified service engineer. Connecting AUDIO

- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio in

Connecting Computer

Connect the D- Sub cable (optional) to “PC (PC IN)” on the rear of your set and the other end to the Video Card of your computer.

Connecting External A/V Devices

- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

Connecting Component Devices (DTV/DVD)

- Connect component video cables (optional) to component connector (“PR”, “PB”, “Y”) on the rear of your set and the other

The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

Kensington Lock

- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

480i

X X O

480p

O O O

576i

X X

576p

O X O

720p

O O O

1080i

O O O

The place of the Kensington Lock may be different depending on its model.

English-5

Viewing the Remote Control

Television Standby button

Number buttons for direct channel access

One/Two-digit channel selection

Selects the TV mode directly

It display “Channel Manager” on the screen.

Volume increase Volume decrease

Temporary sound switch-off

Menu display and change confirmation

Sound mode selection

Picture-In-Picture On / Off

Picture effect selection

PIP FUNCTIONS

SOURCE: Input source selection SWAP: Interchange the main and sub picture SIZE: PIP size selection POSITION: PIP position selection P : Next channel P : Previous channel

Sound effect selection

SRS TSXT selection

Available source selection

Previous channel

The performance of the remote control may be affected by bright light.

This is a special remote control for the visually impaired,

and has Braille points on the Power, Channel and Volume buttons.

Selects the PC mode directly

Automatic Power-off

P : Next channel P : Previous channel

Exit the OSD

Control the cursor in the menu

Use to see information on the current broadcast

Picture freeze

Picture size selection

Teletext Functions

Exit from the teletext display

Teletext index

Teletext hold

SOURCE: Teletext size selection

SWAP: Teletext store

Teletext mode selection (LIST/FLOF)

Teletext sub page

P : Teletext next page P : Teletext previous page

Teletext cancel

Teletext reveal

Alternately select Teletext, Double, or Mix.

Fastext topic selection

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batteries.

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

English-6

Switching On and Off

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2. Press the button on the front of the set.

You also can press the POWER button or the

The programme that you were watching last is reselected automatically.

( ) button on the remote control to turn the TV on.

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4. To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER button on the remote control.

The screen is turned off and a red standby indicator appears on the front of your set.

2. To switch your set back on, simply press the POWER , numeric buttons (0~9) or channel

up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.

1. Press the POWER button on the remote control. The message “Start Plug & Play” is displayed with “OK” selected.

2. Select the appropriate language by pressing the  or  button. Press the ENTER button to confirm your choice.

3. The message “Check antenna input.” is displayed with “OK” selected. Press the ENTER button. Please check that the antenna cable is connected correctly.

4. Select the appropriate country by pressing the  or  button. Press the ENTER button to confirm your choice.

5. The “Auto Store” menu is displayed with the “Start” selected.

Press the ENTER button.

The channel search will start and end automatically. After all the available channels are stored, the “Clock Set” menu appears. Press the

ENTER

6. Press the ENTER button.

Select the “Hour” or “Minute” by pressing the Set the “Hour” or “Minute” by pressing the

You can also set the hour and minute by pressing the number buttons on the remote control.

7. Press the ENTER button to confirm your setting.

 Language: Select your language.  Country: Select your country.  Auto Store: Automatically scans for and stores channels available in the local area.  Clock Set: Sets the current time for the TV clock.

button at any time to interrupt the memorization process.

 or 

 or 

English-7

button.

If you want to reset this feature...

1. Press the MENU button to display the menu.

Press the  or 

2. Press the ENTER button again, to select “Plug & Play”.

3. The message to “Start Plug & Play” is displayed.

button

to select “Setup”, then press the

ENTER

button.

- Storing Channels Automatically

- Storing Channels Manually

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the ENTER button.

2. Press the ENTER button to select “Country”.

3. Select the appropriate country by pressing the  or  button.

Press the ENTER button to confirm your choice.

4. Press the  or  button to select “Auto Store”, then press the ENTER button.

5. Press the ENTER button.

The TV will begin memorizing all of the available channels.

Press the

ENTER

6. After all the available channels are stored, the “Sort” menu appears.

button at any time to interrupt the memorization process and return to the “Channel” menu.

Storing Channels Manually

You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify.

1. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the ENTER button.

2. Press the  or  button to select “Manual Store”, then press the ENTER button.

3. Press the ENTER button to select “Programme”.

4. To assign a programme number to a channel, find the correct number by pressing the  or  button

and then press the ENTER button.

You can also set a programme number by pressing number buttons on the remote control.

English-8

5. Press the  or  button to select “Colour System”, then press the ENTER button.

6. Select the colour standard required by pressing the  or  button then, press the ENTER button.

7. Press the  or  button to select “Sound System”, then press the ENTER button.

8. Select the sound standard required by pressing the  or  button, then press the ENTER button.

If there is an abnormal sound or no sound, re-select the sound system required.

If you know the number of the channel to be stored, press the  or  button to select “Channel”. Press the ENTER button. Select C (Air channel) or S (Cable channel) by pressing the  or  button. Press the  button to select channel. Select the required number by pressing the  or  button and then press the ENTER button.

Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode) You can also set a channel number by pressing number buttons on the remote control.

10. If you do not know the channel numbers, press the  or  button to select “Search”. Press the ENTER button. Search by pressing the  or  button and then press the ENTER button.

11. Press the  or  button to select “Store”. Press the ENTER button to select “OK”.

12. Repeat steps 3 to 11 for each channel to be stored.

 Programme: Selects a program number for the channel.  Colour System: Sets the colour supporting system.  Sound System: Sets the sound supporting system.

Setting the Channel Manager

Set the channels according to your preference. You can easily delete, add, or lock the channel you want.

1. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the ENTER button.

Press the  or  button to select “Channel Manager”,

then press the ENTER button.

Press the ENTER button again, to select “Channel Manager”.

4. Press the  button to select “ ” line.

5. Press the  or  button to select the undesired channel,

then press the ENTER button to cancel.

6. Repeat steps 5 for each channel to be selected or canceled

7. Press the EXIT button to exit.

“ ”

is active when “Child Lock” is selected to “On”.

You can select these options by

simply pressing the CH MGR button on the remote control.

 Channel: Selects a channel.  Search: Scans for the frequency value for the channel.  Store: Saves your settings.

English-9

Activating the Child Lock

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using the buttons on the side. Only the remote control can release the Child Lock setting, so keep the remote control away from children.

1. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the ENTER button.

Press the  or  button to select “Channel Manager”,

then press the ENTER button.

Press the  or  button to select “Child Lock”,

then press the ENTER button.

Press the  or  button to select “On”. Press the

Press the  or  button to select “Channel Manager”,

then press the ENTER button.

6. Press the  button to select “ ” line.

7. Press the  or  button to select the channels you want to lock,

then press the ENTER button.

8. Repeat steps 7 for each channel to be locked or unlocked.

9. Press the EXIT button to exit.

Select “On” or “Off” in “Child Lock” to easily turn the channels which selected on

Sorting the Stored Channels

You can exchange the numbers of two channels, in order to:

automatically stored.

1. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the ENTER button.

Press the  or  button to select “Sort”, then press the

Select channel number that you wish to change by pressing the

 or  button repeatedly. Press the ENTER button.

Press the

change and then press the

Repeat steps 3 to 4 for another channel to be sorted.

6. Press the EXIT button to exit.

ENTER

“ ”

to be active or inactive.

Modify the numeric order in which the channels have been

Give easily remembered numbers to the channels that you

button.

watch most often.

ENTER

The selected channel number and name are moved to right side.

 or 

button to move to the position in which you would like to

The selected channel is exchanged with the one previously stored to the chosen

ENTER

number.

button.

English-10

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.

1. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the ENTER button.

Press the  or  button to select “Name”, then press the

If necessary, select the channel to be assigned to a new name by

pressing the

The selection bar is displayed around the name box.

To...

Select a letter, number or symbol Move on the next letter Move back the previous letter Confirm the name

The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)

Repeat steps 3 to 4 for each channel to be assigned to a new name.

6. Press the EXIT button to exit.

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.

1. Use the number buttons to directly select the channel that you want to fine tune.

2. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the ENTER button.

3. Press the  or  button to select “Fine Tune”, then press the

ENTER button.

4. Press the  or  button to adjust the fine tuning. Press the

5. Press the EXIT button to exit.

Fine tuned channels that have been saved are marked with an asterisk “ * ” on the right-hand side of the channel number in the channel banner. And the channel number turns red. To reset the fine-tuning, select “Reset” by pressing the  or  button and then press the

ENTER button.

 or 

ENTER

button. Press the ENTER button.

Then...

Press the

 or  Press the  button Press the  button Press the ENTER button

button.

ENTER

button

button.

English-11

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.

1. Press the MENU button to display the menu. Press the  or  button to select “Picture”, then press the ENTER button.

Press the ENTER button again, to select “Mode”.

Press the ENTER button again.

Press the

Press the EXIT button to exit.

 Dynamic: Selects the picture for high-definition in a bright room.

You can also press the

P.MODE button on the remote control to select one of the picture settings.

 Standard: Selects the picture for optimum display in a normal environment.  Movie: Selects the picture for comfortable display in a dark room.  Custom: Select to view your favorite display settings.

The Picture mode must be adjusted separately for each input source. You can return to the factory defaults picture settings by selecting the “Reset”.

(Refer to “Resetting the Picture Settings to the Factory Defaults” on page 13)

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

1. To select the desired picture effect, follow the “Changing the Picture Standard” instructions number 1 to 4.

Press the Press the

Press the

particular item.

Press the EXIT button to exit.

 Contrast: Adjusts the lightness and darkness between objects and the background.  Brightness: Adjusts the brightness of the whole screen.  Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.  Colour: Adjusts the colours, making them lighter or darker.  Tint (NTSC only): Adjusts the colour of objects, making them more red or green for a more

The adjusted values are stored according to the selected Picture mode. In PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted

Changing the Colour Tone

You can select the most comfortable colour tone to your eyes.

1. To select the desired picture effect, follow the “Changing the Picture Standard” instructions number 1 to 4

Press the  or  button to select “Colour Tone”, then press the ENTER button.

Press the Press the

Press the EXIT button to exit.

 Cool2: Makes the colour temperature

bluer than “Cool1” menu.

 Cool1: Makes whites bluish.  Normal: Keeps whites white.

The adjusted values are stored according to the selected Picture mode.

 or 

button to select the desired picture effect.

ENTER

(Refer to “Adjusting the Custom Picture”)

 or  button

ENTER

 or  button

button.

to select a particular item.

button.

to decrease or increase the value of a

Press the ENTER button.

natural look.

 or  button

ENTER

to select the desired colour tone setting.

button.

 Warm1: Makes whites reddish.  Warm2: Makes the colour temperature

redder than “Warm1” menu.

English-12

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.

1. To select the desired picture effect, follow the “Changing the Picture Standard” instructions number 1 to 4 on page 12.

2. Press the  or  button to select “Reset”, then press the ENTER button.

Press the EXIT button to exit.

The “Reset” will be set for each picture mode.

Changing the Picture Size

You can select the picture size which best corresponds to your viewing requirements.

1. Press the MENU button to display the menu. Press the  or  button to select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Size”, then press the ENTER button.

3. Select the required option by pressing the  or  button. Press the

You can select these options

by simply pressing the P.SIZE button on the remote control.

ENTER

Press the EXIT button to exit.

 Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.  16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.  Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.  4:3: This is the default setting for a video movie or normal broadcasting.

“Auto Wide” function is available only in "TV", "Ext1", "Ext2", "AV", and "S-Video" mode. In PC Mode, only “16:9” and “4:3” mode can be adjusted. Select by pressing the  or  buttons. Use the  or  button to move the picture up and down. After selecting , use the  or  button to magnify or reduce the picture size in the vertical direction.

button.

Freezing the Current Picture

Press the STILL button to freeze a moving picture into a still one. Press again to cancel.

Digital Noise Reduction

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Digital NR”, then press the

ENTER button.

Press the  or  button to select “On” or “Off”. Press the

4. Press the EXIT button to exit.

English-13

ENTER

button.

DNIe Demo (Digital Natural Image engine)

Samsung’s new technology brings you more detailed images with contrast and white enhancement. A new image compensation algorithm gives viewers brighter and clearer images. DNIe technology will match every signal to your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode to On.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2. Press the  or  button to select “DNIe Demo”, then press the

ENTER button.

Press the  or  button to select “On” or “Off”. Press the

4. Press the EXIT button to exit.

These functions don’t work in PC mode. The DNle Demo is designed to show the difference between the regular and

DNIe pictures.

By default, the product displays the picture with DNle applied.

Viewing the Picture In Picture (PIP)

You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

Press the  or  button to select “PIP”, then press the

3. Press the ENTER button again.

Press the  or  button to select “On”, then press ENTER button.

If the PIP is activated, the size of the main picture turns to “16:9”.

4. Press the  or  button to select “Source”,

Press the PIP button on the

remote control repeatedly to activate or deactivate the “PIP”.

then press ENTER button. Select a source of the sub picture by pressing the  or  button and press the ENTER button.

The sub picture can serve different source selections based on what the main picture is set to.

5. Press the  or  button to select “Swap”. To interchange the main picture and the sub picture, select “Swap” option and press the ENTER button.

The main picture and the sub picture are interchanged. I

f main picture is in “PC” mode, “Swap” is not available.

6. Press the  or  button to select “Size” of the sub picture and then

press the ENTER button. Select a size of the sub picture by pressing the  or  button and then press the ENTER button.

If main picture is in “PC” mode, “Size” is not available.

7. Press the  or  button to select “Position”, then press the ENTER

button. Select the position of the sub picture by pressing the  or  button and then press the ENTER button.

ENTER

button.

English-14

Continued…

8. Press the  or  button to select “Programme” and then press the ENTER button. You can select the channel that you want to view through sub picture by pressing the  or  button. Press the ENTER button.

The “Programme” can be active when the sub picture is set to TV.

9. Press the EXIT button to exit.

You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.

 Source: Used to select a source of the sub picture.  Swap: Used to interchange the main picture and

the sub picture.

PIP Settings

Sub

Main

TV Ext.1 Ext.2

S-Video

Component

HDMI

Changing the Sound Standard

You can select the type of the special sound effect to be used when watching a given broadcast.

1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER button.

2. Press the ENTER button again, to select “Mode”.

3. Select the required sound effect by pressing the  or  button repeatedly

and then press the ENTER button.

4. Press the EXIT button to exit.

You can also select these options by simply pressing the S.MODE button on the remote control.

 Standard: Selects the normal sound mode.  Music: Emphasizes music over voices.  Movie: Provides live and full sound for movies.  Speech: Emphasizes voices over other sounds.

(O: PIP operates, X: PIP doesn’t operate)

Ext.1 X X X X X X O O

Ext.2 X X X X X X O O

 Size: Used to select a size of the sub picture.  Position: Used to move the sub picture.  Programme: Used to Change the sub picture.

S-Video

Component X X X X X X X O

 Custom: Selects your custom sound settings.

(Refer to “Adjusting the Sound Settings”)

PC X X X X X X X O

HDMI

Adjusting the Sound Settings

The sound settings can be adjusted to suit your personal preferences.

1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER button.

2. Press the  or  button to select “Equalizer”, then press the ENTER button.

Press the Press the

4. Press the  or  button to reach the required setting. Press the ENTER button.

5. Press the EXIT button to exit.

If you make any changes to these settings, the Sound Mode is automatically

switched to “Custom”.

 or  button

ENTER

button.

English-15

to select a particular item.

Setting the TruSurround XT (SRS TSXT)

TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling,virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER button.

2. Press the  or  button to select “SRS TSXT”, then press the ENTER button.

Press the  or  button to select “On” or “Off”. Press the

You can also set these options

simply by pressing the SRS button on remote control.

4. Press the EXIT button to exit.

TruSurround XT, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.

Adjusting the Volume Automatically

Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature allows you to automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER button.

2. Press the  or  button to select “Auto Volume”, then press the ENTER button.

Press the  or  button to select “On” or “Off”. Press the

4. Press the EXIT button to exit.

ENTER

button.

Selecting the Internal Mute

If you want to hear the sound through separate speakers, cancel the internal amplifier.

1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER button.

2. Press the  or  button to select “Internal Mute”, then press the ENTER button.

4. Press the EXIT button to exit.

When “Internal Mute” is set to “On’, the Sound menus except for

Press the  or  button to select “On” or “Off”. Press the

“Sound Select” (in PIP mode) cannot be adjusted.

English-16

ENTER

button.

Listening to the Sound of the Sub Picture

During the PIP features activation, you can listen to the sound of the sub picture.

1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER button.

Press the  or  button to select “Sound Select”, then press the ENTER button.

3. Press the  or  button to select “Sub”. Press the ENTER button.

4. Press the EXIT button to exit.

 Main: Used to listen to the sound of the main picture.  Sub: Used to listen to the sound of the sub picture.

You can select this option when the “PIP” is set to “On”.

Resetting the Sound Settings to the Factory Defaults

If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.

1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER button.

Press the  or  button to select “Reset”, then press the ENTER button.

3. Press the EXIT button to exit.

You can select this option when the “Game Mode” is set to “On”.

Connecting Headphones

You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.

When you insert the head set jack into the corresponding port,

you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu.

Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system.

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.

1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER button.

Press the  or  button to select “Time”, then press the

3. Press the ENTER button to select “Clock Set”.

To...

Move to “Hour” or “Minute” Set the “Hour” or “Minute” Press the ENTER button.

5. Press the EXIT button to exit.

If you disconnect the power cord, you have to set the clock again.

You can also set hour and minute by pressing the number buttons on the remote control.

English-17

ENTER

Press the...

 or  button.  or  button.

button.

Setting the Sleep Timer

You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode.

1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER button.

Press the  or  button to select “Time”, then press the

3. Press the  or  button to select “Sleep Timer”, then press the ENTER button.

4. Press the  or  button repeatedly until the desired time appears (Off, 30, 60, 90, 120, 150, 180). Press the ENTER button.

Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears.

5. Press the EXIT button to exit.

The TV automatically switches to standby mode when the timer reaches 0.

Switching the Television On and Off Automatically

You can set the On/Off timers so that the set will: Switch on automatically and tune to the channel of your choice at

the time you select.

Switch off automatically at the time you select.

The first step is to set the television’s clock.

1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER button.

2. Press the  or  button to select “Time”, then press the ENTER button.

3. Press the  or  button to select “On Timer”, then press the ENTER button.

4. Press the  or  button to adjust “Hour”, then press the  button to move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return.

5. Press the  or  button to select “Off Timer”, then press the ENTER button.

6. Press the  or  button to adjust “Hour”, then press the  button to move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return.

7. Press the EXIT button to exit.

You can also set hour and minute by pressing the number buttons on the remote control. The "Activation" setting must be set to "Yes" in order for the timers to work.

ENTER

button.

English-18

Choosing Your Language

When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.

1. Press the MENU button to display the on-screen menu. Press the  or  button to select “Setup”, then press the

ENTER button.

2. Press the  or  button to select “Language”, then press the ENTER button.

3. Select a particular language by pressing the  or  button repeatedly.

4. Press the EXIT button to exit.

Using Game Mode

When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by selecting game menu.

1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER button.

2. Press the  or  button to select “Game Mode”, then press the ENTER button.

4. Press the EXIT button to exit.

mode in the picture menu.

Press the ENTER button.

You can choose one of 21 languages.

Press the  or  button to select “On” or “Off”. Press the

To disconnect the game console and connect another external device, cancel game

If you display the TV menu in Game mode, the screen shakes slightly. Game Mode is not available in TV mode. If Game Mode is On:

• Picture Mode and Sound Mode are automatically changed to Custom and users can not change the mode.

• Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.

• The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.

ENTER

button.

Setting the Blue Screen Mode / Selecting the Melody

Blue Screen: If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off".

Melody: You can hear melody sound when the television is powered on or off.

1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER button.

2. Press the  or  button to select “Blue Screen” or “Melody”. Press the ENTER button.

Press the  or  button to select “On” or “Off”.

Press the

ENTER

4. Press the EXIT button to exit.

button.

English-19

Using the Energy Saving Feature

This function adjusts the brightness of the TV so as to reduce power consumption. When you watching TV at night, set the "Energy Saving " mode option to "High" so as to reduce the dazzling of your eyes as well as the power consumption.

1. Press the MENU button to display the on-screen menu. Press the  or  button to select “Setup”, then press the

ENTER button.

2. Press the  or  button to select “Energy Saving”, then press the ENTER button.

3. Select the required option (Off, Low, Medium, High) by pressing

the  or  button. Press the ENTER button.

4. Press the EXIT button to exit.

Selecting the Source

You can select among external sources connected to your TV’s input jacks.

1. Press the MENU button to display the menu. Press the ENTER button, to select “Input”.

2. Press the ENTER button again, to select “Source List”.

When no external device is connected to your set, only “TV”, “Ext.1”, “Ext.2” are activated in the “Source List”. “AV”, “S-Video”, “Component”, “PC”, “HDMI” are activated only when they are connected to your set.

3. Select the required device by pressing the  or  button. Press the ENTER button.

Press the SOURCE button on the remote control to toggel between all the available

TV mode can be selected by pres

source. and the

P /

SOURCE button.

You can select PC mode by simply pressing the PC button on the remote control.

button on the remote control. But it cannot be selected using the

sing the TV button,

number buttons(0~9),

Editing the Input Source Names

Name the device connected to the input jacks to make your input source selection easier.

1. Press the MENU button to display the menu. Press the ENTER button, to select “Input”.

2. Press the  or  button to select “Edit Name”, then press the ENTER button.

3. Press the  or  button to select the device that you wish to edit. Press the ENTER button.

4. Press the  or  button to select the required device. Press the ENTER button.

5. Press the EXIT button to exit.

English-20

Teletext Decoder

Most set channels carry “ teletext ”, pages of written information that provide information such as: Television programme times.

News bulletins and Weather forecasts. Sports results. Subtitles for the hard of hearing. The teletext pages are organized according to six categories:

Part

Displaying the Teletext Information

You can display teletext information at any time, but signal reception must be good. Otherwise:

Information may be missing. Some pages may not be displayed. To activate the teletext mode and display the contents page:

Using the P ( ) or P ( ) button, select the channel providing the

teletext service.

Press the TTX/MIX ( ) button to activate the teletext mode.

The contents page is displayed. It can be redisplayed at any time by pressing the MENU ( ) button.

3. Press the TTX/MIX ( ) button again.

The actual broadcast will be displayed with “Teletext”, “Double”, and “Mix” in

order on the screen.

4. Press the TV( ) button to exit from the Text display.

If any broken character appears while Text is being viewed, make sure that the

Text language is identical with the language in the “Setup” menu mode. If both languages

are different, select the same language with the Text language on the “Setup” menu.

A B C D E F

Contents

Selected page number. Broadcasting station identity. Current page number or search status. Date and time. Text. Status information.

English-21

Selecting a Specific Teletext Page

Press the number buttons on the remote control to enter the page number directly:

Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons.

If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the

3. Using the various display options:

To display...

Both teletext information and the normal broadcast

Hidden text (answers to quiz games, for example)

The normal screen

A secondary page, by entering its 4-digit number

The next page The previous page

Double-size letters in the:

 Upper half of the screen  Lower half of the screen

Normal screen

PIP

( ) button. Press the

PIP

( ) button again to resume.

Press the...

TTX/MIX ( )

INFO ( )

PRE-CH ( )

P ( ) P

( )

SOURCE

 Once  Twice

 Three times

( )

Using Fastext to Select a Teletext Page

The various topics included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control.

Display the teletext contents page by pressing the

TTX/MIX ( )

2. Press the coloured button corresponding to the topic that you wish to select (The available topics are listed on the status information line).

3. Press the Red button to display the previous page.

Press the Green button to display the next page.

4. Press the TV( ) button to exit from the Text display.

English-22

button.

Setting up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1. First, click on “Control Panel” on the Windows start menu.

2. When the control panel window appears, click on “Appearance and Themes” and a

display dialog-box will appear.

3. When the control panel window appears, click on “Display” and a display dialog-box will appear.

4. Navigate to the “Settings” tab on the display dialog-box. The correct size setting (resolution): Optimum- 1360 X 768 If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended. (All resolutions between the supported limits are supported)

Mode

IBM

VESA

The interface mode is not supported. The set might operate abnormally if a non-standard video format is selected. DVI does not support PC function. Separate and Composite modes are supported. SOG is not supported.

Resolution

640 x 480 720 x 400

640 x 480 640 x 480 800 x 600 800 x 600

800 x 600 1024 x 768 1024 x 768 1024 x 768 1360 x 768

Horizontal

Frequency (kHz)

31.469

37.861

37.500

37.879

48.077

46.875

48.364

56.476

60.023

47.712

Vertical

Frequency (Hz)

59.940

70.087

72.809

75.000

60.317

72.188

75.000

60.000

70.069

75.029

60.015

Pixel Clock

Frequency (MHz)

25.175

28.322

31.500

40.000

50.000

49.500

65.000

75.000

78.750

85.800

Sync Polarity

(H/V)

- / -

- / +

- / -

- / + /+ + /+ + /+

- / -

- / + /+ + /+

English-23

Setting the PC

Press the PC button on the remote control to select the PC mode.

Coarse and Fine Tuning of the Image (Image Lock): The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.

1. Preset: Press the PC button to select PC mode.

2. Press the MENU button to display the menu.

Press the  or  button to select “Setup”, then press the ENTER button.

3. Press the  or  button to select “PC”, then press the ENTER button.

4. Press the ENTER button to select “Image Lock”.

5. Press the  or  button to select “Coarse” or “Fine”,

then press the ENTER button.

6. Press the  or  button to adjust the screen quality. Press the ENTER button.

7. Press the EXIT button to exit. Changing the Image Position (Position):

Adjust the PC’s screen positioning if it does not fit the TV screen.

1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3.

2. Press the  or  button to select “Position”, then press the ENTER button.

3. Press the  or  button to adjusting the Vertical-Position. Press the  or  button to adjust the Horizontal-Position. Press the ENTER button.

4. Press the EXIT button to exit. Adjusting the PC Screen Automatically (Auto Adjustment):

Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically.

1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3.

2. Press the  or  button to select “Auto Adjustment”, then press the ENTER button.

3. Press the EXIT button to exit. Initializing the Image Settings (Image Reset):

You can replace all image settings with the factory default values.

1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3.

2. Press the  or  button to select “Image Reset”, then press the ENTER button.

3. Press the EXIT button to exit.

English-24

Using the Anti-Theft Kensington Lock

The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use.

1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it

Cable

Figure 2

in the locking direction (Figure 2).

2. Connect the Kensington lock cable.

Figure 1

3. Fix the Kensington lock to a desk or a heavy stationary

The place of the Kensington Lock may be different depending on its model.

object.

Troubleshooting: Before Contacting Service Personnel

No sound or picture

Normal picture but no sound

No picture or black and white picture

Sound and picture interference

Blurred or snowy picture, distorted sound

Remote control malfunctions

“Check signal cable.” message is displayed.

On PC mode, “Mode Not Supported.” message is displayed.

The TFT LCD panel uses a panel consisting of sub pixels (3,133,440) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

 Check that the mains lead has been connected to a wall socket.  Check that you have pressed the buttons on the front of the set.  Check the picture contrast and brightness settings.  Check the volume.

 Check the volume.  Check whether the MUTE button has been pressed on the remote control.  Check if “Internal Mute” is off

 Adjust the colour settings.  Check that the broadcast system selected is correct.



Try to identify the electrical appliance that is affecting the set and move it further away.

 Plug your set into a different mains socket.

 Check the direction, location and connections of your aerial.

This interference is often due to the use of an indoor aerial.

 Replace the remote control batteries.  Clean the upper edge of the remote control (transmission window).  Check the battery terminals.

 Check that the signal cable is firmly connected to the PC or video sources.  Check that the PC or video sources are turned on.

 Check the maximum resolution and the frequency of the video adaptor.  Compare these values with the data in the Display Modes.

English-25

Technical and Environmental Specifications

Model Name

Screen Size (Diagonal)

Power Supply

Power Consumption

PC Resolution

Sound

Output

Dimension (WxDxH) Body With stand

Weight With stand

Environmental Considerations

Operating Temperature Operating Humidity Storage Temperature Storage Humidity

Model Name

Screen Size (Diagonal)

Power Supply

Power Consumption

PC Resolution

Sound

Output

Dimension (WxDxH) Body With stand

Weight With stand

Environmental Considerations

Operating Temperature Operating Humidity Storage Temperature Storage Humidity

892.5 x 82.0 x 544.0 mm

892.5 x 249.0 x 615.0 mm

10 °C to 40 °C (50 °F to 104 °F)

10 % to 80 %, non-condensing

-20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensing

LE37S62

37 inch

AC 220-240 V 50 Hz

170 W

1360 x 768 @ 60 Hz

10 W X 2

1026.5 × 94.1 × 626.1 mm

1026.5 × 330.0 × 698.8 mm

22.5 kg

10 °C to 40 °C (50 °F to 104 °F)

10 % to 80 %, non-condensing

-20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensing

LE32S62

32 inch

AC 220-240 V 50 Hz

152 W

1360 x 768 @ 60 Hz

10 W X 2

13.9 kg

LE40S62

40 inch

AC 220-240 V 50 Hz

205 W

1360 x 768 @ 60 Hz

10 W X 2

1100.5 x 95.0 x 661.0 mm

1100.5 x 330.0 x 732.5 mm

23.7 kg

10 °C to 40 °C (50 °F to 104 °F)

10 % to 80 %, non-condensing

-20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensing

English-26

Table des matières

CONNEXION ET PREPARATION DE VOTRE TELEVISEUR

Liste de pièces ......................................................... 2

Installation du support .............................................. 2

Installation du kit de montage mural

Présentation du panneau de commande ................. 3

Présentation du panneau de branchement ............. 4

Présentation de la télécommande ........................... 6

Installation des piles dans la télécommande ........... 6

Mise en marche et arrêt ........................................... 7

Mode de mise en veille de votre télévision.............. 7

Plug & Play .............................................................. 7

....................... 2

REGLAGE DES CANAUX

Mémorisation automatique des chaînes .................. 8

Mémorisation manuelle des chaînes ....................... 8

Réglage de Gestionnaire de Chaînes ..................... 9

Activation de la sécurité enfant

Organisation des canaux mémorisés ...................... 10

Attribution de noms aux canaux .............................. 11

Réception nette des chaînes grâce au réglage fin .. 11

............................... 10

REGLAGE DE L’IMAGE

Modification de l’image standard ............................. 12

Réglage de l’image personnalisée........................... 12

Changement de la nuance couleur .......................... 12

Rétablir les paramètres

de réglage de l’image d’usine .................................. 13

Changement de la taille de l’image ......................... 13

Sélection du format de l’image ................................ 13

Réduction du bruit numérique.................................. 13

DNle Démo (Digital Natural Image engine) ............. 14

Affichage de l’Image dans l’image (PIP) .................. 14

REGLAGE DU SON

Changement de la norme Son

Réglage des paramètres du son

Paramétrage de la technologie TruSurround XT (SRS TSXT)

Réglage automatique du volume

Sélection du mode Silence Int.

Ecoute du son accompagnant l’image secondaire

Rétablir les paramètres de son par défaut.

Connexion du casque.

................................ 15

............................. 15

................................. 16

............................ 16

............................... 16

.. 17

............. 17

........................................... 17

REGLAGE DE L’HEURE

Réglage et affichage de l’heure

Réglage de la minuterie de mise en veille ........... 18

Marche et arrêt automatique du téléviseur........... 18

.............................. 17

REGLAGE DES AUTRES OPTIONS

Choix de la langue

Utilisation de Mode Jeu

Réglage du mode d’écran bleu / Sélection de mélodie

Utilisation de la fonction d’économie d’énergie .... 20

Sélection de la source .......................................... 20

Modification du nom d’une source d’entrée

UTILISATION DE LA FONCTION TELETEXTE

Décodeur télétexte ............................................... 21

Affichage des informations Télétexte ................... 21

Sélection d’une page télétexte spécifique

Utilisation du système Fastext pour sélectionner une page télétexte

................................................. 19

.......................................... 19

............................................. 19

.............................. 22

REGLAGE DU PC

Paramétrage du logiciel PC (Basé sur Windows XP)

Modes d’affichage ................................................ 23

Sélection du PC

......................................... 23

..................................................... 24

RECOMMANDATIONS D’UTILISATION

Utilisation du verrouillage Kensington antivol

Résolution des problèmes avant de contacter le personnel qualifié pour le dépannage Spécifications techniques

et environnementales ........................................... 26

Français

............. 20

............... 22

.......... 25

................. 25

Symboles Appuyer Important Remarque

Bouton

d’accès rapide

Français-1

Liste de pièces

Veuillez vous assurer que les composants suivants sont bien inclus avec votre téléviseur LCD. Le cas échéant, contactez votre revendeur.

M4 X L16

Télécommande et

batteries (AAA x 2)



Instructions d’utilisation Carte de garantie Carte réseau de service Guide de sécurité Cartes d’enregistrement

Carte de garantie / Carte réseau de service / Guide de sécurité / Cartes d’enregistrement (N’est pas disponible dans toutes les agences).

Selon le modèle, il se peut que le socle et les vis ne soient pas inclus.

Cordon

d’alimentation

Panneau inférieur Vis pour le socle X 4

Socle

Chiffon de

nettoyage

Installation du support

< 2 > < 3 >

1. Placez la télévision face posée sur un chiffon doux ou un coussin sur une table.

2. Insérez le socle dans le trou situé sous le téléviseur.

3. Insérez la vis dans le trou indiqué et serrez-la.

Le socle est installé pour les modèles dont la taille de l’écran est de 40 pouces ou plus.

Installation du kit de montage mural

Les accessoires de montage mural (vendus séparément) vous permettent de fixer votre téléviseur au mur. Pour plus d’informations sur l’installation du kit de montage mural, reportez-vous aux instructions fournies avec les composants du kit. Faites appel à un technicien pour obtenir de l’assistance lors de l’installation du support mural. Samsung Electronics n’est pas responsable de tout dommage au produit ou toute blessure sur vous-même ou une autre personne si vous choisissez d’installer le téléviseur vous-même.

Enlevez le support, bouchez l’orifice de la base et fermez à l’aide de deux vis.

Français-2

+ 157 hidden pages