Samsung LE32R74BD User Manual [de]

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Kontakt zu Samsung

Falls Sie Fragen oder Anregungen zu Samsung-Produkten haben, wenden Sie sich bitte an den Samsung-Kundendienst.

LCD TV

LE26R7 LE32R7

LE40R7

Country

BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL RUSSIA SLOVAKIA SPAIN SWEDEN U.K UKRAINE

Customer Care Center

02 201 2418 844 000 844 38 322 887 09 693 79 554

08 25 08 65 65 (€ 0,15/Min)

01805 - 121213 (€ 0,12/Min)

06 40 985 985 199 153 153 02 261 03 710

0900 20 200 88 (€ 0.10/Min)

231 627 22 0 801 801 881 80 8 200 128 8-800-200-0400 0850 123 989 902 10 11 30 08 585 367 87 0870 242 0303 8-800-502-0000

Web Site

www.samsung.com/be

www.samsung.com/cz

www.samsung.com/dk

www.samsung.com/fi

www.samsung.com/fr

www.samsung.de

www.samsung.com/hu

www.samsung.com/it

www.samsung.lu

www.samsung.com/nl

www.samsung.com/no

www.samsung.com/pl

www.samsung.com/pt

www.samsung.ru

www.samsung.com/sk

www.samsung.com/es

www.samsung.com/se

www.samsung.com/uk

www.samsung.com/ur

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

BN68-01007H-01

ON-SCREEN MENUS

PC DISPLAY

PICTURE IN PICTURE (PIP)

TELETEXT

This device is a Class B digital apparatus.

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left,

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

Vorsichtsmaßnahmen beim Anzeigen von Standbildern

Ein Standbild kann zu einer dauerhaften Beschädigung des Fernsehbildschirms führen.

• Zeigen Sie kein Standbild länger als 2 Stunden auf dem LCD-Monitor an, da das Bild auf diese Weise einbrennen kann. Das Einbrennen von Standbildern wird auch als “Bildkonservierung” bezeichnet. Sie können das Einbrennen vermeiden, indem Sie die Helligkeit und den Kontrast des Monitors beim Anzeigen von Standbildern verringern.

•

• Die kontinuierliche Anzeige von Standbildern von Videospielen oder vom PC über einen gewissen Zeitraum hinaus kann partielle Nachbilder verursachen. Um diesen Effekt zu verhindern, verringern Sie Helligkeit und Kontrast, wenn Sie Standbilder anzeigen möchten.

Bei Wiedergabe im Format 4:3 über einen längeren Zeitraum können bedingt durch die unterschiedliche Lichtemission Nachbilder der Ränder links, rechts und in der Mitte des Bildschirms auftreten. DVD- oder Spielekonsole-Wiedergabe können einen ähnlichen Effekt verursachen. Schäden, die durch die o. g. Effekte verursacht wurden, unterliegen nicht der Garantie.

English

CONNECTING AND PREPARING YOUR TV

List of Parts ............................................................................. 2

Installing the Stand ................................................................. 2

Installing the Wall Mount Kit .............................................. 2

Viewing the Control Panel ...................................................... 3

Viewing the Connection Panel ................................................ 4

Viewing the Remote Control ................................................... 6

Installing Batteries in the Remote Control .............................. 6

Switching On and Off .............................................................. 7

Placing Your Television in Standby Mode............................... 7

Plug & Play ............................................................................. 7

SETTING THE CHANNELS

Storing Channels Automatically .............................................. 8

Storing Channels Manually ..................................................... 8

Setting the Channel Manager ................................................. 9

Activating the Child Lock ................................................... 9

Sorting the Stored Channels .................................................. 10

Assigning Channels Names ................................................... 10

Fine Tuning Channel Reception ............................................. 10

LNA (Low Noise Amplifier) ...................................................... 11

SETTING THE PICTURE

Changing the Picture Standard .............................................. 11

Adjusting the Custom Picture ................................................. 11

Changing the Colour Tone ...................................................... 11

Resetting the Picture Settings to the

Factory Defaults...................................................................... 12

Changing the Picture Size ...................................................... 12

Freezing the Current Picture .................................................. 12

Digital Noise Reduction .......................................................... 12

DNIe Demo (Digital Natural Image engine) ............................ 13

Viewing the Picture In Picture (PIP) ....................................... 13

PIP Settings ............................................................................ 14

SETTING THE SOUND

Changing the Sound Standard .......................................... 14

Adjusting the Sound Settings ............................................ 14

Connecting Hheadphones ................................................. 14

Setting the TruSurround XT (SRS TSXT) ......................... 15

Adjusting the Volume Automatically .................................. 15

Selecting the Internal Mute ............................................... 15

Listening to the Sound of the Sub Picture ........................ 15

Resetting the Sound Settings to the Factory Defaults ...... 16

USING THE DTV FEATURE

Previewing the DTV Menu System ......................................... 19

Updating the Channel List Automatically ................................ 19

Updating the Channel List Manually ................................. 20

Editing Your Favourite Channels ............................................ 20

Selecting Channel Manager ................................................... 21

Displaying Programme Information ........................................ 22

Viewing the EPG (Electronic Programme Guide)

Information .............................................................................. 22

Using the Scheduled List ........................................................ 23

Setting the Default Guide ....................................................... 23

Viewing All Channels and Favourite Channels....................... 24

Choosing Your Language ....................................................... 24

Adjusting the Translucency Level ..................................... 24

Setting up the Parental Lock .................................................. 25

Selecting the Preferred Language (Audio) ............................. 25

Viewing Product Information ................................................... 26

Checking the Signal Information ............................................ 26

Upgrading the Software (Option) ............................................ 26

Viewing Common Interface .................................................... 27

Selecting the CI (Common Interface) Menu ........................... 27

Resetting ................................................................................. 27

USING THE TELETEXT FEATURE

Teletext Decoder ............................................................... 28

Displaying the Teletext Information ................................... 28

Selecting a Specific Teletext Page .................................... 29

Using Fastext to Select a Teletext Page ........................... 29

Setting Up Your Remote Control ....................................... 30

Remote Control Codes...................................................... 32

SETTING THE PC

Setting up Your PC Software

(Based on Windows XP) ................................................... 35

Display Modes ................................................................... 35

Setting the PC ................................................................... 36

RECOMMENDATIONS FOR USE

Using the Anti-Theft Kensington Lock ............................... 37

Troubleshooting:

Before Contacting Service Personnel ............................... 37

Technical and Environmental Specifications .................... 38

SETTING THE TIME

Setting and Displaying the Current Time .......................... 16

Setting the Sleep Timer ..................................................... 16

Switching the Television

On and Off Automatically .................................................. 16

SETTING THE OTHERS

Choosing Your Language .................................................. 17

Using Game Mode ............................................................ 17

Setting the Blue Screen Mode /

Selecting the Melody ........................................................ 17

Using the Energy Saving Feature ..................................... 18

Selecting the Source ......................................................... 18

Editing the Input Source Names ....................................... 18

Symbol Press Important Note One-Touch

Button

English-1

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

M4 X L16

Remote Control &

Batteries (AAA x 2)

Owner’s Instructions



Warranty card / Service Network Card / Safety Guide / Registration Cards (Not available in all locations) The stand and stand screw may not be included depending on the model.

Power Cord Cover-Bottom Stand Screw X 4 Stand Cleaning Cloth

 Warranty card 

Service Network Card

 Safety Guide  Registration Cards

Installing the Stand

< 2 >

1. Place the TV faced down on a soft cloth or cushion on a table.

2. Put the stand into the hole at the bottom of the TV.

3. Insert screw into the hole indicated and tighten.

The stand is installed for models with the screen size of 40 inch and above.

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Remove the stand and cover the bottom hole with a cap

and fasten with two screws.

English-2

< 3 >

Viewing the Control Panel

The product colour and shape may vary depending on the model.

SOURCE

Toggles between all the available input sources

(TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI, DTV). In the on-screen menu, use this button as you use the ENTER button on the remote control.

Press to see an on-screen menu of your TV’s features.

In case of DTV mode, the DTV menu appears.

Press to decrease or increase the volume.

In the on-screen menu, use the buttons as you use the  and  buttons on the remote control.

Press to change channels.

In the on-screen menu, use the use the  and  buttons on the remote control. (Without the Remote Control, You can turn on the TV by using the Channel buttons.)

Speakers Power Indicator

Blinks and turns off when the power is on and lights up in

stand-by mode.

(

Power)

Press to turn the TV on and off.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

buttons as you

English-3

Viewing the Connection Panel

[Rear Panel Jacks] (32 inch, 40 inch)

[Side Panel Jacks]

(26 inch model does not have the side panel jacks.)

Power Input

[Rear Panel Jacks] (26 inch)

Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.

Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial / A cable television network / A satellite network

English-4

Connecting HDMI/DVI

Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs).

- No additional Audio connection is needed for an HDMI to HDMI connection. What is HDMI?

- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).

The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture.

“High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio (5. 1 channels).

You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the "R - AUDIO - L" terminal on DVI for sound output.

When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has been set to a compatible

Supported modes for DVI or HDMI

480i 50 Hz 60 Hz Component

Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card. (This will result in a blank screen being displayed)

X X O

480p

O O O

576i

X X O

576p

O X O

720p

O O O

1080i

O O O

Connecting Set-Top Box, VCR or DVD

Connector

EXT 1 EXT 2

Connecting External A/V Devices

- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the A/V device.

- Headphone may be connected to the headphone output ( ) on the rear of your set. While the headphone is connected, the sound from the built-in speakers will be disabled.

SERVICE

- Service connection for qualified service engineer.

Connecting AUDIO

- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio in connectors on the

Amplifier or DVD Home Theater.

Connecting Computer

- Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to the Video Card of your computer.

Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other end to "Audio Out" of the sound card on your computer.

Connecting Component Devices (DTV/DVD)

- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to

corresponding component video out connectors on the DTV or DVD.

- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("P

- The P Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.

- This LCD TV displays its optimum picture resolution in 720p mode.

- This LCD TV displays its maximum picture resolution in 1080i mode.

Kensington Lock

- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

- If you want to use a locking device, contact the dealer where you purchased the TV.

The place of the Kensington Lock may be different depending on its model.

DIGITAL AUDIO OUT (OPTICAL)

- Connect to a Digital Audio Component.

Connecting CI (Common Interface) CARD

Service Port

- Service connection for qualified service engineer.

Video Audio (L/R) RGB

R, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

TV Rear Panel

Input

R", "PB", "Y") on your set.

CI CARD

Output

Video + Audio (L/R)

Only TV or DTV output is available.

Output you can choose.

Please insert the card as shown

English-5

Inputs or outputs for external devices, such as VCR, DVD,

video game device or video disc players.

- When not inserting "CI CARD" in some channels, "Scrambled Signal" is displayed on the screen.

- The pairing information containing a telephone number, CI CARD ID, Host ID, and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

- When the channel information configuration has finished, the message "Updating Completed" is displayed, indicating that the channel list is now updated.

You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.

Viewing the Remote Control

Selects a target device to be controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR) (Refer to page 30~34)

Television Standby button Number buttons for direct

channel access One/Two-digit channel selection It display "Channel Manager"

on the screen.



Selects the TV and DTV mode directly VCR/DVD Functions

Rewind, Stop, Play/Pause, Fast/Forward

Volume increase

Volume decrease Temporary sound switch-off Menu display and

change confirmation Electronic Program Guide (EPG) display Picture-In-Picture On / Off Picture freeze Picture effect selection Sound effect selection SET: Adjusts 5 separate devices - TV, DVD,

STB, CABLE, or VCR. RESET: When your remote does not work, change the batteries and press the “RESET” button for 2-3 seconds before use.

Available source selection Previous channel

The performance of the remote control may be affected by bright light. This is a special remote control for the visually impaired, and has Braille points on the

Power, Channel and Volume buttons.

DTV menu display Automatic Power-off

: Next channel

: Previous channel

P Exit the OSD

Control the cursor in the menu Use to see information on the

current broadcast Picture size selection Digital subtitle display Sound mode selection SRS TSXT selection

Teletext Functions

Exit from the teletext display Teletext index Teletext hold Teletext size selection Teletext mode selection (LIST/FLOF) Teletext sub page P : Teletext next page

: Teletext previous page

P Teletext cancel Teletext reveal Alternately select Teletext, Double, or Mix. Fastext topic selection Teletext store

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batterie

Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

English-6

Switching On and Off

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2. Press the button on the front of the set. You also can press the POWER button or the

The programme that you were watching last is reselected automatically.

Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

TV/DTV

button on the remote control to turn the TV on.

4. To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER

The screen is turned off and a red standby indicator appears on the front of your set.

To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or channel up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.

button on the remote control.

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.

1. Press the POWER The message "Starten von Plug&Play" is displayed with "OK" selected.

2. Select the appropriate language by pressing the  or  button. Press the ENTER

3. The message "Check antenna input." is displayed with "OK" selected. Press the ENTER

Please check that the antenna cable is connected correctly.

4. Select the appropriate country by pressing the  or  button. Press the ENTER button to confirm your choice.

The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER button.

The channel search will start and end automatically. After all the available channels are stored, the "Clock Set" menu appears. Press the ENTER

6. Press the ENTER button. Select the "Hour" or "Minute" by pressing the

Set the "Hour" or "Minute" by pressing the

You can also set the hour and minute by pressing the number buttons on the remote control.

7. Press the ENTER button to confirm your setting. The DTV channel scan menu appears and the DTV channel is automatically updated.

If the DTV channel is updated, the Source in the source list of the Input menu is

automatically changed to DTV.

For detailed descriptions about DTV channel update, refer to page 19 of this manual.

 Language: Select your language.  Country: Select your country.  Auto Store: Automatically scans for and stores channels available in the local area.  Clock Set: Sets the current time for the TV clock.

If you want to reset this feature...

1. Press the MENU button to display the menu. Press the  or 

2. Press the ENTER button again, to select "Plug & Play".

3. The message to

button on the remote control.

button to confirm your choice.

button.

button at any time to interrupt the memorization process.

 or 

 or 

button

to select "Setup", then press the

"Start Plug & Play"

is displayed.

button.

ENTER

button.

English-7

- Storing Channels Automatically

- Storing Channels Manually

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1. Press the MENU button to display the menu. Press the  or  button to select "Channel", then press the ENTER

2. Press the ENTER

button to select "Country".

3. Select the appropriate country by pressing the  or  button. Press the ENTER

4. Press the  or  button to select "Auto Store", then press the ENTER

5. Press the ENTER

The TV will begin memorizing all of the available channels.

Press the ENTER button at any time to interrupt the memorization process and return to the "Channel" menu.

button.

button to confirm your choice.

button.

6. After all the available channels are stored, the "Sort" menu appears.

Storing Channels Manually

You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify.

1. Press the MENU button to display the menu. Press the  or  button to select "Channel", then press the ENTER

2. Press the  or  button to select "Manual Store", then press the ENTER

3. Press the ENTER

button to select "Programme".

4. To assign a programme number to a channel, find the correct number by pressing the  or  button and then press the ENTER

You can also set a programme number by pressing number buttons on the remote control.

button.

5. Press the  or  button to select "Colour System", then press the ENTER button.

6. Select the colour standard required by pressing the  or  button then, press the ENTER

7. Press the  or  button to select "Sound System", then press the ENTER

8. Select the sound standard required by pressing the  or  button, then press the ENTER

If there is an abnormal sound or no sound, re-select the sound system required.

9. If you know the number of the channel to be stored, press the  or  button to select "Channel". Press the ENTER button. Select C (Air channel) or S (Cable channel) by pressing the  or  button. Press the  button to select channel. Select the required number by pressing the  or  button and then press the ENTER button.

Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode) You can also set a channel number by pressing number buttons on the remote control.

10. If you do not know the channel numbers, press the  or  button to select "Search".

Press the ENTER

button. Search by pressing the  or  button and then press the ENTER button.

11. Press the  or  button to select "Store". Press the ENTER

12. Repeat steps 3 to 11 for each channel to be stored.

button.

button to select "OK".

 Programme: Selects a program number for the channel.  Colour System: Sets the colour supporting system.  Sound System: Sets the sound supporting system.

 Channel: Selects a channel.  Search: Scans for the frequency value for the channel.  Store: Saves your settings.

English-8

Setting the Channel Manager

Set the channels according to your preference. You can easily delete, add, or lock the channel you want.

1. Press the MENU button to display the menu. Press the  or  button to select "Channel", then press the ENTER

2. Press the  or  button to select "Channel Manager", then press the ENTER

3. Press the ENTER

4. Press the  button to select "

5. Press the  or  button to select the undesired channel,

then press the ENTER

6. Repeat steps 5 for each channel to be selected or canceled

7. Press the EXIT button to exit.

You can select these options by simply

pressing the CH MGR button on the remote control.

button.

button again, to select "Channel Manager".

button to cancel.

is active when "Child Lock" is selected to "On".

button.

Activating the Child Lock

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using the buttons on the side. Only the remote control can release the Child Lock setting, so keep the remote control away from children.

1. Press the MENU button to display the menu. Press the  or  button to select "Channel", then press the ENTER

2. Press the  or  button to select "Channel Manager", then press the ENTER

3. Press the  or  button to select "Child Lock", then press the ENTER

4. Press the  or  button to select "On" or "Off". Press the ENTER

5. Press the  or  button to select "Channel Manager",

then press the ENTER

6. Press the  button to select "

7. Press the  or  button to select the channels you want to lock,

then press the ENTER

8. Repeat steps 7 for each channel to be locked or unlocked.

9. Press the EXIT button to exit.

button.

" line.

button.

Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on

to be active or inactive.

button.

English-9

Sorting the Stored Channels

You can exchange the numbers of two channels, in order to:

1. Press the MENU button to display the menu. Press the  or  button to select "Channel", then press the ENTER

2. Press the  or  button to select "Sort", then press the ENTER

3. Select channel number that you wish to change by pressing the

 or  button repeatedly. Press the ENTER

4. Press the  or  button to move to the position in which you would like to change and then press the ENTER button.

5. Repeat steps 3 to 4 for another channel to be sorted.

6. Press the EXIT button to exit.

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.

1. Press the MENU button to display the menu. Press the  or  button

to select "Channel", then press the ENTER button.

2. Press the  or  button to select "Name", then press the ENTER

3. If necessary, select the channel to be assigned to a new name by

pressing the  or  button. Press the ENTER

Repeat steps 3 to 4 for each channel to be assigned to a new name.

6. Press the EXIT button to exit.

Modify the numeric order in which the channels have been automatically stored. Give easily remembered numbers to the channels that you watch most often.

button.

The selected channel number and name are moved to right side.

The selected channel is exchanged with the one previously stored to the chosen number.

button.

The selection bar is displayed around the name box.

To...

Select a letter, number or symbol Move on the next letter Move back the previous letter Confirm the name

The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)

Then...

Press the Press the Press the Press the ENTER

 or 



button



button

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.

1. Use the number buttons to directly select the channel that you want to fine tune.

2. Press the MENU button to display the menu.

Press the  or  button to select "Channel", then press the ENTER

3. Press the  or  button to select "Fine Tune", then press the ENTER

4. Press the  or  button to adjust the fine tuning.

Press the ENTER

5. Press the EXIT button to exit.

Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red. To reset the fine-tuning, select "Reset" by pressing the  or  button and then press the

ENTER

button.

English-10

LNA (Low Noise Amplifier)

If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal).

1. Press the MENU button to display the menu.

Press the  or  button to select "Channel", then press the ENTER

2. Press the  or  button to select "LNA", then press the ENTER

3. Press the  or  button to select "On" or "Off". Press the ENTER

4. Press the EXIT button to exit.

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.

1. Press the MENU button to display the menu.

Press the  or  button to select "Picture", then press the ENTER button.

2. Press the ENTER

3. Press the ENTER

Press the  or  button to select the desired picture effect. Press the ENTER button.

5. Press the EXIT button to exit.

 Dynamic: Selects the picture for high-definition in a bright room.  Standard: Selects the picture for optimum display in a normal environment.

You can also press the P.MODE

button on the remote control to select one of the picture settings.

 Movie: Selects the picture for comfortable display in a dark room.  Custom:

The Picture mode must be adjusted separately for each input source. You can return to the factory defaults picture settings by selecting the "Reset".

(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 12)

button again, to select "Mode". button again, to select "Mode".

Select to view your favorite display settings.

(Refer to "Adjusting the Custom Picture")

button.

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

1. To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 4.

2. Press the  or  button to select a particular item. Press the ENTER

3. Press the  or  button to decrease or increase the value of a particular item.

Press the ENTER

4. Press the EXIT button to exit.

 Contrast: Adjusts the lightness and darkness between objects and the background.  Brightness: Adjusts the brightness of the whole screen.  Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.  Colour: Adjusts the colours, making them lighter or darker.  Tint (NTSC only):

The adjusted values are stored according to the selected Picture mode. In PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted

Changing the Colour Tone

You can select the most comfortable colour tone to your eyes.

1. To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 4.

2. Press the  or  button to select "Colour Tone", then press the ENTER

3. Press the  or  button to select the desired colour tone setting.

Press the ENTER

4. Press the EXIT button to exit.

 Cool2: Makes the colour temperature bluer than "Cool1" menu.  Cool1: Makes whites bluish.  Normal: Keeps whites white.

The adjusted values are stored according to the selected Picture mode.

button.

Adjusts the colour of objects, making them more red or green for a more natural look.

button.

 Warm1: Makes whites reddish.  Warm2: Makes the colour temperature redder than

"Warm1" menu.

English-11

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.

1. To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 4 on page 11.

2. Press the  or  button to select "Reset", then press the ENTER

3. Press the EXIT button to exit.

The "Reset" will be set for each picture mode.

Changing the Picture Size

You can select the picture size which best corresponds to your viewing requirements.

1. Press the MENU button to display the menu.

Press the  or  button to select "Picture", then press the ENTER

2. Press the  or  button to select "Size", then press the ENTER

3. Select the required option by pressing the  or  button.

You can select these options by

simply pressing the P.SIZE button on the remote control.

Press the ENTER

4. Press the EXIT button to exit.

 Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.  16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.  Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.  4:3: This is the default setting for a video movie or normal broadcasting.

“Auto Wide” function is available only in “TV”, “Ext1”, “Ext2”, “AV”, and “S-Video” mode. In PC Mode, only "16:9" and "4:3" mode can be adjusted. Select by pressing the  or  buttons. Use the  or  button to move the picture up and down. After selecting , use the  or  button to magnify or reduce the picture size in the vertical direction.

button.

Freezing the Current Picture

Press the STILL button to freeze a moving picture into a still one. Press again to cancel.

Digital Noise Reduction

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.

1. Press the MENU button to display the menu.

Press the  or  button to select "Picture", then press the ENTER

2. Press the  or  button to select "Digital NR", then press the ENTER

3. Press the  or  button to select "On" or "Off". Press the ENTER

4. Press the EXIT button to exit.

button.

English-12

DNIe Demo (Digital Natural Image engine)

Samsung’s new technology brings you more detailed images with contrast and white enhancement. A new image compensation algorithm gives viewers brighter and clearer images. DNIe technology will match every signal to your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode to On.

1. Press the MENU button to display the menu.

Press the  or  button to select "Picture", then press the ENTER

2. Press the  or  button to select "DNIe Demo", then press the ENTER

3. Press the  or  button to select "On" or "Off". Press the ENTER

4. Press the EXIT button to exit.

These functions don’t work in PC mode. The DNle Demo is designed to show the difference between the regular and DNIe pictures. By default, the product displays the picture with DNle applied.

Viewing the Picture In Picture (PIP)

You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture.

1. Press the MENU button to display the menu.

Press the  or  button to select "Picture", then press the ENTER

2. Press the  or  button to select "PIP", then press the ENTER button.

Press the PIP button on the remote

control repeatedly to activate or deactivate the "PIP".

3. Press the ENTER

Press the  or  button to select "On", then press ENTER button.

If the PIP is activated, the size of the main picture turns to “16:9”.

4. Press the  or  button to select "Source",then press ENTER button.

Select a source of the sub picture by pressing the  or  button and press the ENTER button.

The sub picture can serve different source selections based on what the main picture is set to.

5. Press the  or  button to select "Swap".

To interchange the main picture and the sub picture, select "Swap" option and press the ENTER button.

The main picture and the sub picture are interchanged. I

f main picture is in "PC" mode, "Swap" is not available.

6. Press the  or  button to select "Size" of the sub picture and then press the

ENTER

button. Select a size of the sub picture by pressing the  or  button

and then press the ENTER

If main picture is in "PC" mode, "Size" is not available.

7. Press the  or  button to select "Position", then press the ENTER button.

Select the position of the sub picture by pressing the  or  button and then press the ENTER

8. Press the  or  button to select "Programme" and then press the ENTER You can select the channel that you want to view through sub picture by pressing the  or  button. Press the ENTER button.

The "Programme" can be active when the sub picture is set to TV.

9. Press the EXIT button to exit.

You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.

 Source: Used to select a source of the sub picture.  Swap: Used to interchange the main picture and the sub picture.  Size: Used to select a size of the sub picture.  Position: Used to move the sub picture.  Programme: Used to Change the sub picture.

button again.

button.

English-13

PIP Settings

Sub

Main

TV Ext.1 Ext.2

S-Video

Component

HDMI

DTV

Ext.1 X X X X X X O O X

X X X X X

X O O X

Ext.2

X X X X X

X O O

Changing the Sound Standard

You can select the type of the special sound effect to be used when watching a given broadcast.

1. Press the MENU button to display the menu. Press the  or  button to select "Sound", then press the ENTER button.

2. Press the ENTER

3. Select the required sound effect by pressing the  or  button repeatedly and then

press the ENTER

4. Press the EXIT button to exit.

 Standard: Selects the normal sound mode.  Music: Emphasizes music over voices.  Movie: Provides live and full sound for movies.  Speech: Emphasizes voices over other sounds.

You can also select these options by simply pressing the S.MODE button on the remote control.

 Custom: Selects your custom sound settings.

X X X X X

X O O X

S-Video

X X X X X X X O X

Component

X X X X X X X

button again, to select "Mode".

button.

(Refer to "Adjusting the Sound Settings")

O: PIP operates, X: PIP doesn’t operate

X X X X X X X X X

HDMI

O O O O O O X X X

DTV

X X X X X X X X X

Adjusting the Sound Settings

The sound settings can be adjusted to suit your personal preferences.

1. Press the MENU button to display the menu. Press the  or  button to select "Sound", then press the ENTER

2. Press the  or  button to select "Equalizer", then press the ENTER

3. Press the  or  button to select a particular item.

Press the ENTER

4. Press the  or  button to reach the required setting. Press the ENTER

5. Press the EXIT button to exit.

If you make any changes to these settings, the Sound Mode is automatically switched to "Custom".

Connecting Hheadphones

You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.

When you insert the head set jack into the corresponding port, you can operate only

“Internal Mute” and “Sound Select” (in PIP mode) in Sound menu.

Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system.

button.

English-14

Setting the TruSurround XT (SRS TSXT)

TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling,virtual surround sound experience through any twospeaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER

2. Press the  or  button to select “SRS TSXT”, then press the ENTER

Press the  or  button to select “On” or “Off”. Press the

4. Press the EXIT button to exit.

button.

TruSurround XT, SRS and symbol are trademarks of

You can also set these options

simply by pressing the SRS button on remote control.

SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.

Adjusting the Volume Automatically

Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature allows you to automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

1. Press the MENU button to display the menu. Press the  or  button to select "Sound", then press the ENTER

2. Press the  or  button to select "Auto Volume", then press the ENTER

3. Press the  or  button to select "On" or "Off". Press the ENTER

4. Press the EXIT button to exit.

button.

ENTER

button.

Selecting the Internal Mute

If you want to hear the sound through separate speakers, cancel the internal amplifier.

1. Press the MENU button to display the menu. Press the  or  button to select "Sound", then press the ENTER

2. Press the  or  button to select "Internal Mute", then press the ENTER

3. Press the  or  button to select "On" or "Off". Press the ENTER

4. Press the EXIT button to exit.

When "Internal Mute" is set to "On’, the Sound menus except for "Sound Select"

(in PIP mode) cannot be adjusted.

Listening to the Sound of the Sub Picture

During the PIP features activation, you can listen to the sound of the sub picture.

1. Press the MENU button to display the menu. Press the  or  button to select "Sound", then press the ENTER

2. Press the  or  button to select "Sound Select", then press the ENTER

3. Press the  or  button to select "Sub". Press the ENTER

4. Press the EXIT button to exit.



Main: Used to listen to the sound of the main picture. Sub: Used to listen to the sound of the sub picture.



You can select this option when the "PIP" is set to "On". (refer to page 13)

English-15

button.

Resetting the Sound Settings to the Factory Defaults

If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.

1. Press the MENU button to display the menu. Press the  or  button to select "Sound", then press the ENTER

2. Press the  or  button to select "Reset", then press the ENTER

3. Press the EXIT button to exit.

You can select this option when the "Game Mode” is set to "On".

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.

1. Press the MENU button to display the menu. Press the  or  button to select "Setup", then press the ENTER

2. Press the  or  button to select "Time", then press the ENTER

3. Press the ENTER button to select "Clock Set".

To...

Move to "Hour" or "Minute" Set the "Hour" or "Minute" Press the ENTER

5. Press the EXIT button to exit.

If you disconnect the power cord, you have to set the clock again. You can also set hour and minute by pressing the number buttons on the remote control.

button.

Press the...

 or  button.  or  button.

Setting the Sleep Timer

You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode.

1. Press the MENU button to display the menu. Press the  or  button to select "Setup", then press the ENTER

2. Press the  or  button to select "Time", then press the ENTER button.

3. Press the  or  button to select "Sleep Timer", then press the ENTER

4. Press the  or  button repeatedly until the desired time appears

(Off, 30, 60, 90, 120, 150, 180). Press the ENTER

5. Press the EXIT button to exit.

Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears.

The TV automatically switches to standby mode when the timer reaches 0.

Switching the Television On and Off Automatically

You can set the On/Off timers so that the set will:

Switch on automatically and tune to the channel of your choice at the time you select.

Switch off automatically at the time you select.

The first step is to set the television’s clock.

1. Press the MENU button to display the menu. Press the  or  button to select "Setup", then press the ENTER

2. Press the  or  button to select "Time", then press the ENTER

3. Press the  or  button to select "On Timer", then press the ENTER

button.

English-16

4. Press the  or  button to adjust "Hour", then press the  button to move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return.

5. Press the  or  button to select "Off Timer", then press the ENTER

6. Press the  or  button to adjust "Hour", then press the  button to

move to the next step. Set other items using the same method as above. When finished, press the ENTER

7. Press the EXIT button to exit.

Choosing Your Language

When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.

1. Press the MENU button to display the on-screen menu. Press the  or  button to select "Setup", then press the ENTER button.

2. Press the  or  button to select "Language", then press the ENTER

3. Select a particular language by pressing the  or  button repeatedly.

4. Press the EXIT button to exit.

Using Game Mode

When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by selecting game menu.

1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER

2. Press the  or  button to select “Game Mode”, then press the ENTER

3. Press the  or  button to select “On” or “Off”. Press the ENTER

4. Press the EXIT button to exit.

in the picture menu.

•

• Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.

• The Reset Sound function is activated. Selecting the Reset function after setting the equalizer

button.

button to return.

You can also set hour and minute by pressing the number buttons on the remote control.

The "Activation" setting must be set to "Yes" in order for the timers to work.

button.

Press the ENTER

You can choose one of 5 languages.

button.

To disconnect the game console and connect another external device, cancel game mode

If you display the TV menu in Game mode, the screen shakes slightly. Game Mode is not available in TV mode. If Game Mode is On:

Picture Mode and Sound Mode are automatically changed to Custom and users cannot change the mode.

resets the equalizer setting to the factory defaults.

Setting the Blue Screen Mode / Selecting the Melody

Blue Screen: If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off".

Melody: You can hear melody sound when the television is powered on or off.

1. Press the MENU button to display the menu.

Press the  or  button to select "Setup", then press the ENTER

2. Press the  or  button to select "Blue Screen" or "Melody".

Press the ENTER

3. Press the  or  button to select "On" or "Off". Press the ENTER

4. Press the EXIT button to exit.

button.

English-17

button.

Using the Energy Saving Feature

This function adjusts the brightness of the TV so as to reduce power consumption. When you watching TV at night, set the "Energy Saving " mode option to "High" so as to reduce the dazzling of your eyes as well as the power consumption.

1. Press the MENU button to display the on-screen menu. Press the  or  button to select "Setup", then press the ENTER

2. Press the  or  button to select "Energy Saving", then press the ENTER

3. Select the required option (Off, Low, Medium, High) by pressing the  or  button.

Press the ENTER

4. Press the EXIT button to exit.

Selecting the Source

You can select among external sources connected to your TV’s input jacks.

1. Press the MENU button to display the menu. Press the ENTER

2. Press the ENTER

3. Select the required device by pressing the  or  button.

Press the ENTER button.

Press the SOURCE button on the remote control to toggel between all the available source.

When no external device is connected to your set, only "TV", "Ext.1", "Ext.2" are activated in the "Source List". "AV", "S-Video", "Component", "PC", "HDMI", "DTV" are activated only when they are connected to your set.

TV mode can be selected by pressing the TV/DTV button, number buttons(0~9), and the P

button.

button, to select "Input". button again, to select "Source List".

button on the remote control. But it cannot be selected using the SOURCE button.

Editing the Input Source Names

Name the device connected to the input jacks to make your input source selection easier.

1. Press the MENU button to display the menu. Press the ENTER

2. Press the  or  button to select "Edit Name", then press the ENTER

3. Press the  or  button to select the device that you wish to edit.

Press the ENTER

4. Press the  or  button to select the required device. Press the ENTER

5. Press the EXIT button to exit.

button, to select "Input".

button.

English-18

Previewing the DTV Menu System

To help you navigate around the on-screen menu system and adjust the various settings available, refer to the following illustration.

Available in the Digital TV mode.

Press the D.MENU button.

Guide Now & Next Guide

Full Guide Scheduled List Default Guide

Preference OSD Language

Translucency Level Parental Lock

Feature Audio Language

Channel Auto Store

Manual Store Edit Favourite Channels Channel Manager

Now/Next, Full Guide

Deutsch, English, Svenska, Italiano, Français High, Medium, Low, Opaque Parental Rating Change PIN

System Product Information

Signal Information Software Upgrade Common Interface Reset

The sub-items of the CI Menu may vary depending on the CAM model.

You can select these options by simply

pressing the D.MENU button on the remote control.

Updating the Channel List Automatically

You can update the channel list when the broadcaster adds new Services or if you move the TV to a new location.

1. Press the D.MENU button to display the DTV menu.

2. Press the  or  button to select "Channel", then press the ENTER

3. Press the ENTER

4. When it has finished, the number of scanned services will be displayed.

The existing favourite channel list will not be deleted when the channel list is updated.

To stop the scan before it has finished, press the

5. Press the EXIT button to exit.

If the signal status is poor, the “No Service found! Check the aerial connection” message is displayed.

button again, to select "Auto Store".

English-19

Application Info CI Menu

ENTER

Module Information Smart card information Language Software Download

button.

button with "STOP" selected.

Updating the Channel List Manually

You can specify the channel or frequency for a fast channel search.

1. Press the D.MENU button to display the DTV menu.

2. Press the  or  button to select "Channel", then press the ENTER

3. Press the  or  button to select "Manual Store", then press the ENTER

To...

Move to "Channel", "Frequency", or "Bandwidth" Set the "Channel", or "Bandwidth" Set the "Frequency"

• Frequency: The frequency available in the Channel group is displayed.

• Bandwidth: The available bandwidths are 7 and 8 MHz.

•

Channel: Channel “21” to “68” in sequence are displayed in UK.

5. Press the red button to start the scan for digital services. When it has finished,channels are updated in the channel list.

6. Press the EXIT button to exit.

You can input by pressing the button on the remote control. You can not change only Frequency and when changing a channel, the Frequency will be

automatically changed.

Editing Your Favourite Channels

You can edit your favourite channels using the four colour buttons.

1. Press the D.MENU button to display the DTV menu.

2. Press the  or  button to select "Channel", then press the ENTER

3. Press the  or  button to select "Edit Favourite Channels",

then press the ENTER

4. Press the red button to display all currently stored channels.

5. Press the  or  button to select a channel you want. Press the ENTER

favourite channel list.

• Select All: Select all channels currently displayed.

• Select None: Deselect all selected channels.

• Preview: Displays (a) currently selected channel(s).

6. Press the EXIT button to exit.

A "★" icon is shown next to the selected channel and the channel will be added to the

•

To undo, press the ENTER

The Favorite Channels settings have been completed.

button.

Then...

 or  button  or  button

Numeric button (0~9)

button.

button again.

Add

You can use this function when one or more favourite channels have been selected.

1. Press the D.MENU button to display the DTV menu.

2. Press the  or  button to select "Channel", then press the ENTER

button.

3. Press the  or  button to select "Edit Favourite Channels", then press the ENTER

button.

4. Press the red button in the "Edit Favourite Channels" menu. To add more channels, refer to the step 5 on the previous description.

If you want to check the channel to be stored, press D.MENU button.

Press the EXIT button to exit.

• To add all channels to the favourite channel list, press the red button.

• To remove all channels, press the green button.

• Preview : Displays (a) currently selected channel(s).

• Press the CH MGR button to display the favourite channel manager.

English-20

Move

1. Press the D.MENU button to display the DTV menu.

2. Press the  or  button to select "Channel", then press the ENTER

button.

3. Press the  or  button to select "Edit Favourite Channels", then press the ENTER

button.

4. Select the required channel using the  or  button.

5. Press the green button.

" icon is displayed on the left side of the channel name.

A "

6. Press the  or  button to select the channel that you want to move, and press the green or ENTER button.

7. Press the EXIT button to exit.

Preview

1. In the "Edit Favourite Channels" menu, select the channel to be previewed by pressing the  or  button.

2. Press the yellow button.

The selected channel is displayed on the screen.

Delete

1. In the "Edit Favourite Channels" menu, select the channel to be deleted from the favourite channels list by pressing the  or  button.

2. Press the blue button.

The selected channel and number will be deleted. To add a deleted channel back in to the favourite channel list, see "Add" on page 20.

Selecting Channel Manager

You can exclude the channels you have chosen from the channels you have scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning.

1. Press the D.MENU button to display the DTV menu.

2. Press the  or  button to select "Channel", then press the ENTER

3. Press the  or  button to select "Channel Manager". Press the ENTER

4. Press the yellow button to toggle between your favourite channels and all channels.

" Editing Your Favourite Channels" menu (refer to page 20~21).

5. Press the red or green button to display the previous or next channel manager page.

6. Press the  or  button to select a channel to be tuned.

You can select these options by simply pressing the CH MGR button on the remote control.

Press the ENTER

The channel number, name and an icon are displayed in the top left corner while changing

7. Press the blue or CH MGR button to exit from the channel manager.

button.

Your favourite channels are only displayed if they were previously set in the

button.

the channel. The channel number and name are displayed if the channel is one of the all channels, and a icon if the channel is one of the favourite channels.

English-21

Displaying Programme Information

While viewing a channel, additional information about the current programme may be displayed.

1. While viewing a programme, press the INFO (

The programme information is displayed.

) button.

2. To exit from banner information, press the INFO ( ) button.

Viewing the EPG (Electronic Programme Guide) Information

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available.

Now & Next Guide

For the six channels indicated in the left-hand column, displays the Current programme and the Next programme information.

Full Guide

Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which may be scrolled forwards or backwards in time.

1. Press the D.MENU button to display the DTV menu.

2. Press the ENTER

3. Press the  or  button to select "Now & Next Guide" or "Full Guide".

Press the ENTER

You can also display the guide menu simply by pressing the GUIDE button.

To...

Watch a programme in the EPG list

If the next program is selected, it is scheduled with the clock icon displayed. If the ENTER icon gone. For details about scheduling programmes, refer to the next page.

View programme information

Toggle between the "Now & Next Guide" or "Full Guide"

Display the "Favourites" and the "All Channels" list

Scrolls backwards quickly (2 hours). Scrolls forward quickly (2 hours). Exit the guide

The programme title is on the upper part of the screen center.

Please click on INFO Running Time, Status Bar, Parental Level, Video Quality Information(HD/SD), Sound Modes, Subtitle or Teletext, Languages of Subtitle or Teletext, and brief summary of the highlighted programme are included on the detailed information. "..." will be appeared if the summary is long.

Six channels are displayed. To scroll between channels, move to a channel using the  or  button. To display page by page, use the P

button, to select "Guide".

button.

Then...

•

Select a programme by pressing the , , ,  button.

•

Press the

button is pressed again, the scheduling is canceled with the clock

• Select a programme of your choice by pressing the

Press the INFO ( ) button when the programme

• of your choice is highlighted.

• Press the red button repeatedly.

• Press the green button repeatedly.

• Press the yellow button repeatedly.

• Press the blue button repeatedly.

• Press the EXIT button.

( )

button for the detailed information. Channel Number,

, , , 

or button.

ENTER

button.

English-22

+ 56 hidden pages

Samsung LE32R74BD User Manual [de]

Precautions When Displaying a Still Image

Contents

Installing the Stand

Installing the Wall Mount Kit

Viewing the Control Panel

Viewing the Connection Panel

Viewing the Remote Control

Installing Batteries in the Remote Control

Switching On and Off

Placing Your Television in Standby Mode

Plug & Play

Storing Channels Automatically

Storing Channels Manually

Setting the Channel Manager

Activating the Child Lock

Sorting the Stored Channels

Assigning Channels Names

Fine Tuning Channel Reception

LNA (Low Noise Amplifier)

Changing the Picture Standard

Adjusting the Custom Picture

Changing the Colour Tone

Resetting the Picture Settings to the Factory Defaults

Changing the Picture Size

Freezing the Current Picture

Digital Noise Reduction

DNIe Demo (Digital Natural Image engine)

Viewing the Picture In Picture (PIP)

PIP Settings

Changing the Sound Standard

Adjusting the Sound Settings

Connecting Hheadphones

Setting the TruSurround XT (SRS TSXT)

Adjusting the Volume Automatically

Selecting the Internal Mute

Listening to the Sound of the Sub Picture

Resetting the Sound Settings to the Factory Defaults

Setting and Displaying the Current Time

Setting the Sleep Timer

Switching the Television On and Off Automatically

Choosing Your Language

Using Game Mode

Setting the Blue Screen Mode / Selecting the Melody

Using the Energy Saving Feature

Selecting the Source

Editing the Input Source Names

Previewing the DTV Menu System

Updating the Channel List Automatically

Updating the Channel List Manually

Editing Your Favourite Channels

Selecting Channel Manager

Displaying Programme Information

Viewing the EPG (Electronic Programme Guide) Information