Samsung LA46A610, LA46A610A3F User Manual
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
AUSTRALIA 1300 362 603 www.samsung.com
CHINA 800-810-5858
HONG KONG 3698-4698 www.samsung.com/hk
INDIA 3030 8282
INDONESIA 0800-112-8888 www.samsung.com
JAPAN 0120-327-527 www.samsung.com/jp
MALAYSIA 1800-88-9999 www.samsung.com/my
NEW ZEALAND 0800SAMSUNG(726-7864) www.samsung.com/nz
PHILIPPINES 1800-10-SAMSUNG(726-7864) www.samsung.com/ph
SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com
THAILAND 1800-29-3232
TAIWAN 0800-329-999 www.samsung.com/tw
VIETNAM 1 800 588 889 www.samsung.com
SOUTH AFRICA 0860-SAMSUNG(726-7864 ) www.samsung.com
U.A.E 800-SAMSUNG (726-7864)
Customer Care Centre
010-6475 1880
1800 110011
02-689-3232
8000-4726
Web Site
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
LCD TV
user manual
BN68-01508U-00
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
Model Serial No.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image
•
retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the
screen when displaying a still image.
•
•
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left,
right and center of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
Contents
Connecting and Preparing Your TV
List of Parts ........................................................................2
■
Installing the Wall Mount Kit ..............................................2
■
Viewing the Control Panel .................................................3
■
Viewing the Connection Panel ...........................................4
■
Remote Control .................................................................6
■
Installing Batteries in the Remote Control .........................7
■
Switching On and Off .........................................................7
■
Placing Your Television in Standby Mode ..........................7
■
Viewing the Menus ............................................................8
■
Using the TOOLS Button ...................................................8
■
Plug & Play Feature ...........................................................8
■
Channel Control
Storing Channels Automatically .......................................10
■
Storing Channels Manually ..............................................10
■
Viewing the EPG (Electronic Programme Guide)
■
Information .......................................................................12
Setting the Default Guide ................................................13
■
Managing Channels .........................................................14
■
Setting the Channel Mode ...............................................21
■
Activating the Child Lock .................................................21
■
Fine Tuning Analogue Channels ......................................22
■
Checking the Digital-Signal Information ..........................22
■
LNA (Low Noise Amplier) ...............................................23
■
Picture Control
Changing the Picture Standard .......................................24
■
Customizing the Picture Settings .....................................24
■
Adjusting the Detailed Settings ........................................25
■
Conguring Picture Options .............................................26
■
Resetting the Picture Settings to the Factory Defaults ....27
■
Viewing Picture-in-Picture ...............................................28
■
Sound Control
Changing the Sound Standard ........................................29
■
Selecting the Sound Mode ..............................................30
■
Connecting Headphones (Sold separately) .....................31
■
Time Setting
Setting the Clock .............................................................31
■
Setting the Sleep Timer ...................................................33
■
Switching the Television On and Off Automatically ..........34
■
Function Description
Setting Up Your Personal ID Number (PIN) .....................35
■
Setting up the Parental Lock ...........................................36
■
Setting the Subtitle ..........................................................37
■
Selecting a Teletext Language ........................................38
■
Selecting a Preference Language ...................................38
■
Melody/Entertainment/Energy Saving .............................39
■
Upgrading the Software ...................................................40
■
To Select the Source .......................................................41
■
To Edit the Input Source Name ........................................41
■
PC Display
Using Your TV as a Computer (PC) Display ....................42
■
Display Modes .................................................................42
■
Setting up the TV with your PC .......................................43
■
WISELINK
Using the WISELINK Function ........................................44
■
Using the Photo List ........................................................45
■
Sorting Photo List ............................................................47
■
Viewing a Photo or Slide Show ......................................51
■
Using the Music List ........................................................55
■
Sorting Music List ............................................................56
■
Playing a Music File .........................................................60
■
Using the Setup Menu .....................................................62
■
About Anynet
What is Anynet+?.............................................................63
■
Connecting Anynet+ Devices...........................................63
■
Setting Up Anynet+ .........................................................64
■
Scanning and Switching between Anynet+ Devices ........64
■
Recording ........................................................................65
■
Listening through a Receiver (Home theater) ..................66
■
Troubleshooting for Anynet+ ...........................................66
■
+
Recommendations for Use
Teletext Feature ...............................................................67
■
Auto Wall-Mount Adjustment (Sold separately) ..............68
■
Using the Anti-Theft Kensington Lock
■
(depending on the model) ................................................70
Securing the TV to the Wall .............................................71
■
Troubleshooting: Before Contacting Service Personnel ..72
■
Specications ..................................................................73
■
Symbol Press Note One-Touch Button
English - 1
Connecting and Preparing Your TV
List of Parts
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
Remote Control & Batteries
•
➣
(AAA x 2)
Owner’s Instructions
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
Power Cord Cover-Bottom Cleaning Cloth
Warranty card
•
Safety Guide
•
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions
provided with the Wall Mount items. Contact a technician for assistance when
installing the wall mounted bracket.
Samsung Electronics is not responsible for any damage to the product or injury
to yourself or others if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV is turned on. It may
result in personal injury due to electric shock.
➣
Remove the stand and cover the bottom hole with a cap and fasten with
two screws.
Registration Cards
•
English - 2
English - 3
Viewing the Control Panel
8 8
4
1
2
3
5
6
7
The product colour and shape may vary depending on the model.
➣
Front Panel buttons
Touch each button to
operate.
1
SOURCE
Toggles between all the available input sources
(TV, AV1, AV2, S-Video, Component1, Component2,
PC, HDMI1, HDMI2/DVI, HDMI3). In the on-screen
menu, use this button as you would use the ENTER
button on the remote control.
2
MENU
Press to see an on-screen menu of your TV’s features.
3
– VOL +
Press to increase or decrease the volume.
In the on-screen menu, use the – VOL + buttons as you
would use the ◄ and ► buttons on the remote control.
4
CH
Press to change channels. In the on-screen menu, use
the CH buttons as you would use the ▼ and ▲
buttons on the remote control.
5
POWER INDICATOR
Blinks and turns off when the power is on and lights up
in stand-by mode.
6
(Power)
Press to turn the TV on and off.
7
REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
8
SPEAKERS
Viewing the Connection Panel
!
890
HDMI IN3
[TV Rear Panel]
Power Input
[TV Side Panel]
The product colour and shape may vary depending on the model.
➣
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
➣
➣
When connecting an external device, match the colour of the connection terminal to the cable.
1
PC IN [PC] / [AUDIO]
Connect to the video and audio output jack on your PC.
2
S-VIDEO or VIDEO / R-AUDIO-L
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “R-AUDIO-L” on your set and the other ends to corresponding audio out connectors on
the A/V device.
3
HDMI IN 1, HDMI IN 2, HDMI IN 3
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
- No additional Audio connection is needed for an HDMI to HDMI connection.
- When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
What is HDMI?
➣
- “High Denition Multimedia interface” allows the transmission of high denition digital video data and multiple channels
of digital audio.
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth
Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
The TV may not output sound and pictures may be displayed with abnormal colour when DVD players/Cable Boxes/
➣
Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable
and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2)
[R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD player/Cable
Box/Satellite receiver to conrm the HDMI version, then request a rmware update. HDMI cables that are not 1.3 may
cause annoying icker or no screen display.
English - 4
English - 5
DVI IN(HDMI2) [R-AUDIO-L]
- DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component.
➣
480i 480p 576i 576p 720p 1080i 1080p
HDMI/DVI 50Hz X X X O O O O
HDMI/DVI 60Hz X O X X O O O
Component O O O O O O O
4
ANT IN
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial / A cable television network / A satellite network
5
SERVICE
- Connector for SERVICE only.
- Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using
your remote control.
6
WISELINK
Connect a USB mass storage device to view photo les (JPEG) and play audio les (MP3).
7
HEADPHONES JACK
Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound
from the built-in speakers will be disabled.
8
AUDIO OUT [R-AUDIO-L]
Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding
audio in connectors on the Amplier or DVD Home Theatre.
9
DIGITAL AUDIO OUT (OPTICAL)
- Connects a set of external headphones for private listening.
When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel
➣
audio only. If you want to hear 5.1 channel audio, connect the Optical jack on the DVD player or Cable/Satellite Box
directly to an Amplier or Home Theater, not the TV.
0
COMPONENT IN
- Connect component video cables (optional) to component connector (“PR”, “PB”, “Y”) on the rear of your set and the
other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV
(or DVD) and connect the DTV (or DVD) to component connector (“PR”, “PB”, “Y”) on your set.
- The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y,
Cb and Cr.
- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding
audio out connectors on the DTV or DVD.
!
KENSINGTON LOCK (depending on the model)
- The Kensington Lock (optional) is a device used to physically x the system when used in a public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The location of the Kensington Lock may be different depending on its model.
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
Television Standby button.
2
Selects the TV mode
directly.
3
Number buttons for direct
channel access
4
One or more digit channel
selection
5
+: Volume increase
–: Volume decrease
6
Available source selection
7
Electronic Program Guide
(EPG) display
8
Use to quickly select
frequently used functions.
9
Use to see information on
the current broadcast
0
Colour buttons: Use these
buttons in the Channel list
and WISELINK, etc.
@
Press to select the optional
display and sound modes
for sports, cinema and
games.
#
Use these buttons in the
DMA, WISELINK and
Anynet+.
( : This remote can beThis remote can be
used to control recording
on Samsung recorders
with the Anynet+ feature)
$
Press to backlight the
buttons on the remote.
This function is convenient
for using at night or when
the room is dark. (Using
the remote control with the
ON/OFF light button
set to On will reduce the
battery usage time.)
%
Previous channel
^
Temporary sound switch-
off
&
P : Next channel
P : Previous channel
*
Displays the main on-
screen menu
(
This function enables you
to view and play photo
and music les from an
external device.
)
Returns to the previous
menu
a
Control the cursor in the
menu
b
Exit the on-screen menu
c
Use this when connecting
a SAMSUNG DMA
(Digital Media Adapter)
device through an HDMI
interface and switching
to DMA mode. (The DMA
button is optional.) For
more information on the
operating procedures,
refer to the user manual
of the DMA. This button
is available when
“Anynet+(HDMI-CEC)” is
“On” (see page 64)
d
Picture size selection
e
Digital subtitle display
f
It display “Channel List” on
the screen.
Teletext Functions
2
Exit from the teletext
display
6
Teletext mode selection
(LIST/FLOF)
7
Teletext store
8
Teletext size selection
9
Teletext reveal
0
Fastext topic selection
!
Alternately select Teletext,
Double, or Mix.
%
Teletext sub page
&
P : Teletext next page
P : Teletext previous
*
)
b
page
Teletext index
Teletext hold
Teletext cancel
The performance of the remote control may be affected by bright light.
➣
English - 6
English - 7
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the gure.
2. Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the
➣
compartment.
3.
Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the
➣
remote control for a long time.
If the remote control doesn’t work, check the following:
➣
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?
Switching On and Off
The mains lead is attached to the rear of your set.
1.
Plug the mains lead into an appropriate socket.
The standby indicator lights up on your set.
➣
2.
Press the button on your set.
You also can press the POWER
➣
The programme that you were watching last is reselected automatically.
➣
3.
Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or CH button on your
set.
4.
To switch your set off, press the POWER button again.
button or the TV/DTV button on the remote control to turn the TV on.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when
you wish to interrupt viewing temporarily (during a meal, for example).
1.
Press the POWER button on the remote control.
The screen is turned off and a red standby indicator appears on your set.
➣
2.
To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or channel up/down
( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is
➣
best to unplug the set from the mains and aerial.
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen.
The menu’s left side has icons: Picture, Sound, Channel, Setup, Input,
Application.
2.
Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s sub-menu.
3. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about one minute.
➣
Picture
Mode
Backlight : 7
Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G/R) : G50/R50
Detailed Settings
:
Standard
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu changes
depending on which external input mode you are viewing.
1.
Press the TOOLS button.
The “Tools” menu will appear.
2.
Press the ▲ or ▼ button to select a menu.
3. Press the ▲/▼/◄/►/ENTER buttons to display, change, or use the
selected items. For a more detailed description of each function, refer to the
corresponding page.
Device List
Tools
EnterMove
Device List: see page 64
•
Picture Mode: see page 24
•
Sound Mode: see page 29
•
Sleep Timer: see page 33
•
SRS TS XT: see page 29
•
Energy Saving: see page 39
•
Dual l ll: see page 30
•
PIP: see page 28
•
Auto Adjustment: see page 43
•
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l ll : Mono
e
Exit
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
Press the POWER button on the remote control.
1.
The message “Menu Language, Store Demo, Channels, and Time will be
set.” is displayed.
2.
Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the
ENTER button.
We recommend setting the TV to “Home Use” mode for the best picture in
➣
your home environment.
“Store Demo” mode is only intended for use in retail environments.
➣
If the unit is accidentally set to “Store Demo” mode and you want to return
➣
to “Home Use” (Standard): Press the Volume button on the TV. When the
volume OSD is displayed, press and hold the MENU button on the TV for
5 seconds.
English - 8
Menu Language, Store Demo, Channels, and Time will
be set.
Select ‘Home Use’ when installing this TV in your home.
Plug & Play
Plug & Play
Store Demo
OK
Enter
Home Use
EnterMove
English - 9
3. Press the ▲ or ▼ button to select the channel source to memorize.
Press the ENTER button to select “Start”.
Digital & Analogue: “Digital” and “Analogue” channels.
➣
Digital: “Digital” channels.
Analogue: “Analogue” channels.
The channel search will start and end automatically.
➣
Press the ENTER
➣
button at any time to interrupt the memorization
process.
➣
After all the available channels are stored, the message “Set the Clock
Mode.” is displayed.
4.
Press the ENTER button to select the “Clock Mode”.
Press the ▲ or ▼ button to select “Manual”, then Press the ENTER
button.
➣
If you select “Auto”, see page 32 to set the clock.
If you have received a digital signal, the time will be set automatically.
5. Select the “Day”, “Month”, “Year”, “Hour” or “Minute” by pressing the
◄ or ► button. Set the “Day”, “Month”, “Year”, “Hour” or “Minute” by
pressing the ▲ or ▼ button.
➣
You can also set the “Month”, “Day”, “Year”, “Hour” or “Minute” by
pressing the number buttons on the remote control.
The message “Enjoy your viewing” is displayed.
6.
When you have nished, press the ENTER button.
Plug & Play
Select the channel source to memorize.
Digital & Analogue
Digital
Analogue
Move
Plug & Play
Auto Store in progress. Channel 69
Digital Channels: 29
Analogue Channels: 0
Plug & Play
Auto Store is completed.
Digital Channels : 45
Analogue Channels : 32
Plug & Play
Set the Clock Mode.
Clock Mode : Auto
Plug & Play
Set current date and time
Day
01
Hour
12
Move
Plug & Play
Enjoy your viewing
Stop
OK
Month
01
Minute
00
Adjust
Start
Start
Start
Enter
20%
Enter
Auto
Manual
EnterMove Skip
Year
20 08
Enter
Skip
Skip
SkipEnter
Skip
If you want to reset this feature...
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER
button.
2.
Press the ENTER button again to select “Plug & Play”.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is
“0-0-0-0”.
➣
If you want to change PIN number, refer to 35 page.
➣
For further details on setting up options, refer to the pages 8~9.
➣
The “Plug & Play” feature is only available in the TV mode.
OK
Setup
Plug & Play ►
Time
Change PIN
Parental Lock
Subtitle
Teletext Language : ----
Preference
Wall-Mount Adjustment
Plug & Play
The Menu Language, Store Demo, Channels, and Time will
be set.
0~9
Enter PIN
Return
Channel Control
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your area). Automatically allocated
programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers
manually and clear any channels you do not wish to watch.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “Auto Store”, then press the ENTER
button.
3.
Press the ▲ or ▼ button to select the channel source to memorize.
Press the ENTER button to select “Start”.
Digital & Analogue: “Digital” and “Analogue” channels.
➣
Digital: “Digital” channels.
Analogue: “Analogue” channels.
Scans for all channels with active broadcast stations and stores them in
➣
the TV’s memory.
If you want to stop Auto Store, press the ENTER
➣
button.
The “Stop Auto Store?” message will be displayed.
Select “Yes” by pressing the ◄ or ► button, then press the ENTER button.
4. Press the EXIT button to exit.
If a channel is locked using the “Child Lock” function, the PIN input window appears (refer to page 21).
➣
Channel
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Ch.
Child Lock : On
►
Storing Channels Manually
You can store television channels, including those received via cable networks. When storing channels manually, you can
choose:
•
Whether or not to store each of the channels found.
•
The programme number of each stored channel which you wish to identify.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “Manual Store”, then press the ENTER
button.
Digital Channel
Press the ▲ or ▼ button to select “Digital Channel”, then press the
3.
ENTER button.
➣
If a channel is locked using the “Child Lock” function, the PIN input
window appears (refer to page 21).
4.
Press the ◄ or ► button to select the required option.
− Channel : Set the Channel number using the ▲, ▼ or number buttons.
− Frequency : Set the frequency using the number buttons.
− Bandwidth : Set the bandwidth using the ▲, ▼ or number buttons.
5.
Press the ENTER button to start the scan for digital services.
➣
When it has nished, channels are updated in the channel list.
6.
When it has nished, the number of scanned services will be displayed.
7. Press the EXIT button to exit.
Auto Store
Channel
Manual Store ►
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Auto Store
Channel
ManualStore ►
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Manual Store
Channel
31
Frequency
554000 KHz
Digital Channel
Analogue Channel
Bandwidth
8MHz
English - 10
Move
Adjust
ReturnSearch
English - 11
Analogue Channel
Press the ▲ or ▼ button to select “Analogue Channel”, then press the
3.
ENTER button.
If a channel is locked using the “Child Lock” function, the PIN input
➣
window appears (refer to page 21).
4.
Press the ◄ or ► button to select the required item below.
Press the ▲ or ▼ button to adjust to the setting satised.
5. Press the EXIT button to exit.
Auto Store
Channel
ManualStore ►
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Digital Channel
Analogue Channel
Programme (Programme number to be assigned to a channel)
Press the ▲ or ▼ button until you nd the correct number.
You can also select the channel number directly by pressing the numeric
➣
buttons (0~9).
Colour System: Auto/PAL/SECAM/NTSC4.43
Press the ▲ or ▼ button to select the required colour standard.
Sound System: BG/DK/I/L
Press the ▲ or ▼ button to select the required sound standard.
Channel (When you know the number of the channel to be stored)
Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
Press the ► button, then press the ▲ or ▼ button to select the required
number.
➣
You can also select the channel number directly by pressing the numeric
buttons (0~9).
➣
If there is abnormal sound or no sound, reselect the sound standard
required.
Search (When you do not know the channel numbers)
Press the ▲ or ▼ button to start the search.
The tuner scans the frequency range until the rst channel or the channel
that you selected is received on the screen.
Store (When you store the channel and associated programme number)
Set to OK by pressing the ENTER
Channel mode
➣
button.
- P (Programme mode): When completing tuning, the broadcasting stations
in your area have been assigned to position numbers from P00 to P99. You
can select a channel by entering the position number in this mode.
- C (Air channel mode): You can select a channel by entering the assigned
number to each air broadcasting station in this mode.
- S (Cable channel mode): You can select a channel by entering the assigned
number for each cable channel in this mode.
Programme
1
Channel
C
--
Manual Store
Colour SystemBGSound System
Au to
Search
62 MHz
Move
Adjust
Store
?
Return
Viewing the EPG (Electronic Programme Guide) Information
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank
or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as
new information becomes available.
1.
Press the MENU button to display the menu.
2.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
3.
Press the ▲ or ▼ button to select “Full Guide” or “Mini Guide” then press the
ENTER button.
Mini Guide
The information of each program is displayed by each line on the current
channel Mini Guide screen from the current program onwards according to
the program starting time order.
Full Guide
Displays the programme information as time ordered One hour segments.
Two hours of programme information is displayed which may be scrolled
forwards or backwards in time.
To... Then...
Watch a programme in the
EPG list
Select a programme by pressing the
▲, ▼, ◄, ► button.
Exit the guide Press the blue button
If the next program is selected, it is scheduled with the clock
➣
icon displayed. If the ENTER
button is pressed again, press
the ◄, ► button to select Cancel Schedules, the scheduling is
canceled with the clock icon gone. For details about scheduling
programmes, refer to the next page.
View programme
information
Select a programme of your choice by
•
pressing the ▲, ▼, ◄, ► button.
Then press the INFO button when the
•
programme of your choice is highlighted.
The programme title is on the upper part
•
of the screen center.
Please click on INFO button for the detailed information. Channel
➣
Number, Running Time, Status Bar, Parental Level, Video
Quality Information (HD/SD), Sound Modes, Subtitle or Teletext,
languages of Subtitle or Teletext and brief summary of the
highlighted programme are included on the detailed information.
“...” will be appeared if the summary is long.
Toggle between the “Mini
Press the red button repeatedly.
Guide” or “Full Guide”
In Full Guide
Scrolls backwards
•
Press the green button repeatedly.
•
quickly (24 hours).
Scrolls forwards quickly
•
Press the yellow button repeatedly.
•
(24 hours).
In Mini Guide
Display next page
•
Press the green button.
•
quickly.
Display previous page
•
Press the yellow button.
•
quickly.
You can also display the guide menu simply by pressing the GUIDE button.
O
(To congure the “Default Guide”, refer to the descriptions on page 13.)
Auto Store
Manual Store
Channel
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Signal Information
Full Guide
900 f tn
901 ITV Play
902 Kerrang!
903 Kiss
903 oneword
903 Smash Hits!
▼
Watch
Channel
Mini Guide DTV Cable 900 f tn
2:00
2:30
▼
5:00
Watch
DTV Cable 900 f tn Tue, Jan 10 12:00
Freshmen On Campus
2:00 - 2:30
No Detailed Information
Today 2:00 - 3:00 3:00 - 4:00
Freshmen O..
Street Hypn..
Mint Extra
Loaded
Fresh 40 with Dynamite MC
The Distillery
Smash Hits! Sunday
Information
Information
Mini Guide +24 Hours Exit
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Signal Information
LNA : Off
Freshmen On Campus
Street Hypnosis
Booze Britain
Full Guide Next Page Exit
No Information
No Information
Kisstory
No Information
English - 12
English - 13
Setting the Default Guide
You can decide whether to display either the “Mini Guide” or the “Full Guide” when the GUIDE button on the remote control
is pressed.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “Default Guide”, then press the ENTER
button.
Full Guide
Mini Guide
Channel
Default Guide : Mini Guide ►
Channel List
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Signal Information
LNA : Off
3. Select “Mini Guide” or “Full Guide” using the ▲ or ▼ button, and press the
ENTER button.
4. Press the EXIT button to exit.
You can select these options by simply pressing the GUIDE button on the
O
remote control.
Full Guide
Mini Guide
Channel
DefaultGuide :MiniGuide ►
Channel List
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Signal Information
LNA : Off
Mini Guide
Full Guide
Managing Channels
Using this menu, you can Add/Delete or set Favourite channels and use the program guide for digital broadcasts.
Viewing All Channels
Show all currently available channels.
To use the Channel List function, operate the “Auto Store” rst.
Press the MENU button.
1.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”, then press the ENTER
button.
Press the ◄ button to select “Added Ch.”.
2.
3. Press the ▲ or ▼ button to select “All Channels”.
Shows all currently available channels.
➣
Press the ENTER button.
4. Press the ▲ or ▼ button to select a channel to view, then press the
ENTER button. You can watch the selected channel.
Added Channels
All Channels
Mini Guide
Default Guide : Mini Guide
Channel
Channel List
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Signal Information
LNA : Off
824 UKTV Gold
825 UKTV style
A 1 C --
A 2 C
A 3 ♥ C
A 4 C
A 5 C
A 6 C
A 7 C
A 8 C
All
Channel Type Zoom Select
824 UKTV Gold
825 UKTV style
A 1 C --
A 2 C
A 3 ♥ C
A 4 C
A 5 C
A 6 C
A 7 C
A 8 C
All
Channel Type Zoom Select
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Option
Option
Press the CH LIST button on the remote control to bring up the channel lists.
O
Using the Colour buttons on the Remote with the Channel List
Red (Channel Type): Toggle between your “TV”, “Radio”, “Data/Other” and
•
“All”.
Green (Zoom): Enlarges or shrinks a channel number.
•
Yellow (Select): Selects multiple channel lists.
•
TOOLS (Option): Displays the “Delete”(or “Add”), “Add to Favourite”(or
•
“Delete from Favourite”), “Lock”, “Timer Viewing”, “Edit Channel Name”,
“Sort”, “Edit Channel Number”, “Select All”, “Deselect All” or “Auto Store”
menu. (The Options menus may differ depending on the situation.)
A gray-coloured channel indicates the channel has been deleted.
➣
The “Add” menu only appears for deleted channels.
A channel marked with the “♥” mark means the channel has been set as a Favourite.
➣
The “Delete from Favourite” menu only appears for channels with the “♥” mark.
English - 14
English - 15
Erasing and Adding Channels
You can delete or add a channel to display the channels you want.
1.
Press the MENU button.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button. Press the ▲ or ▼ button to select “Channel List”, then press the
ENTER button.
2. Press the ◄ button to select “Added Channels”.
3. Press the ▲ or ▼ button to select “All Channels”.
Shows all currently available channels.
➣
Press the ENTER button.
4. Press the ▲ or ▼ button to select a channel to delete, then press the
TOOLS button.
5.
Press the ENTER button to select “Delete”.
➣
All deleted channels will be shown on “All Channels” menu.
6.
Press the EXIT button to exit.
You can also add a channel to the “Added Channels” menu in the same
➣
manner.
A channel must be deleted before it can be added back to the “Added
➣
Channels” list.
To Add (Restore) a channel back to the Added Channel List, follow steps
➣
1-3 above, press the ▲ or ▼ button to select a channel to add, the press
the TOOLS button. Press the ENTER
Press the CH LIST button on the remote control to bring up the channel
O
button to select Add.
lists.
Mini Guide
Default Guide : Mini Guide
Channel
Channel List
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Signal Information
LNA : Off
824 UKTV Gold
All Channels
825 UKTV style
A 1 C --
A 2 C
A 3 C
A 4 C
A 5 C
A 6 C
A 7 C
A 8 C
All
Channel Type Zoom Select
--
--
--
--
--
--
--
Delete
Add to Favourite
Lock
Timer Viewing
Edit Channel Name
Sort
▼
Option
Setting Your Favourite Channels
You can set channels you watch frequently as favourites.
1.
Press the MENU button.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button. Press the ▲ or ▼ button to select “Channel List”, then press the
ENTER button.
2. Press the ◄ button to select “Added Channels”.
3. Press the ▲ or ▼ button to select “All Channels”.
Shows all currently available channels.
➣
Press the ENTER button.
4. Press the ▲ or ▼ button to select a channel as a favourite channel.
Adding multiple channels to Favourites
➣
Press the ▲ or ▼ button to select the desired channel in the channel
list. Then press the yellow button. Repeat the above operation to select
multiple channels. The mark appears to the left of the selected
channels.
5.
Press the TOOLS button.
6.
Press the ▲ or ▼ button to select “Add to Favourite”, then press the
ENTER button. The “♥” symbol will be displayed and the channel will be
set as a favourite.
7.
To cancel your favourite channel selection, press the TOOLS button when a
favourite channel is selected.
Press the ▲ or ▼ button to select “Delete from Favourite”, then press the
ENTER button.
The channel is deleted from “Favourites” and the “♥” mark also disappears.
Press the EXIT button to exit.
You can also Add or Delete a channel from Favourites in the “Added
➣
Channels” menu in the same manner.
All favourite channels will be shown on “Favourite” menu.
➣
Mini Guide
Default Guide : Mini Guide
Channel
Channel List
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Signal Information
LNA : Off
824 UKTV Gold
All Channels
825 UKTV style
A 1 C --
A 2 C
A 3 ♥ C
A 4 C
A 5 C
A 6 C
A 7 C
A 8 C
All
Channel Type Zoom Select
--
--
--
--
--
--
--
Delete
Add to Favourite
Lock
Timer Viewing
Edit Channel Name
Sort
▼
Option
Press the CH LIST button on the remote control to bring up the channel
O
lists.
Locking and Unlocking Channels
This function is available only when the “Child Lock” is set to “on”. (see page 21)
1.
Press the MENU button.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”, then press the
ENTER button.
2. Press the ◄ button to select “Added Channels”.
3. Press the ▲ or ▼ button to select “All Channels”.
Shows all currently available channels.
➣
Press the ENTER button.
Locking channels
4.
Press the ▲ or ▼ button to select the channels you want to lock, then
press the TOOLS button.
5.
Press the ▲ or ▼ button to select “Lock”, then press the ENTER button.
6. Enter your 4 digit PIN number.
➣
The “ ” symbol will be displayed and the channel will be locked.
➣
The default PIN number of a new TV set is “0-0-0-0”.
➣
If you want to change PIN number, refer to 35 page.
Mini Guide
Default Guide : Mini Guide
Channel
Channel List
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Signal Information
LNA : Off
824 UKTV Gold
All Channels
825 UKTV style
A 1 C --
A 2 C
A 3 C
A 4 C
A 5 C
A 6 C
A 7 C
A 8 C
All
Channel Type Zoom Select
--
--
--
--
--
--
--
Delete
Add to Favourite
Lock
Timer Viewing
Edit Channel Name
Sort
▼
Option
Unlocking channels
7.
Press the ▲ or ▼ button to select the channels you want to Unlock, then
press the TOOLS button.
8.
Press the ▲ or ▼ button to select “Unlock”, then press the ENTER
button.
9.
Enter your 4 digit PIN number.
➣
The channel is unlocked and the “ ” mark also disappears.
➣
The default PIN number of a new TV set is “0-0-0-0”.
➣
If you want to change PIN number, refer to 35 page.
10.
Press the EXIT button to exit.
824 UKTV Gold
All Channels
825 UKTV style
A 1 C --
A 2 C
A 3 C
A 4 C
A 5 C
A 6 C
A 7 C
A 8 C
All
Channel Type Zoom Select
--
--
--
--
--
--
--
Delete
Add to Favourite
Unlock
Timer Viewing
Edit Channel Name
Sort
▼
Option
English - 16
English - 17
Reserving a Program (Timer Viewing)
If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel
List; even when you are watching another channel. To reserve a program, set the current time rst. See pages 31~32.
Press the MENU button.
1.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”, then press the ENTER
button.
Press the ▲ or ▼ button to select a channel, then press the TOOLS button.
2.
Press the ▲ or ▼ button to select “Timer Viewing”, then press the ENTER
3.
button. The Reserve a Program (Timer Viewing) screen appears.
4. Press the ▲/▼/◄/► buttons to reserve a program and then press the
ENTER button. Reserving a program has been completed.
Press the EXIT button to exit.
You can also reserve a program in the “All Channels” or “Favourite” menus
➣
using the same procedures.
For information on how to conrm a viewing reservation, refer to page 18.
➣
Only memorized channels can be reserved.
You can set the channel, month, day, year, hour and minute directly by
➣
pressing the number buttons on the remote control.
Mini Guide
Default Guide : Mini Guide
Channel
Channel List
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Signal Information
LNA : Off
824 UKTV Gold
Added Channels
825 UKTV style
A 1 C --
A 2 C
A 3 ♥ C
A 4 C
A 5 C
A 6 C
A 7 C
A 8 C
All
Channel Type Zoom Select
Antenna
DT V
Date
01 - 0 1 - 200 8
Move
Delete
Add to Favourite
--
Lock
--
Timer Viewing
--
Edit Channel Name
--
--
Sort
--
--
Timer Viewing
Channel
80 0
Adjust
▼
Repeat
On ce
Start Time
10 :0 0
Option
ReturnEnter
Press the CH LIST button on the remote control to bring up the channel lists.
O
Digital Program Guide and Viewing Reservation
When a digital channel is selected, and you press the ► button, the Program
Guide for the channel appears. You can reserve a program according to the
procedures described above.
: A program currently being broadcast.
: A reserved program
824
Added Channels
825
908
A
2 C
A
3 ♥ C
A
4 C
A
5 C
A
6 C
A
7 C
A
8 C
All
Channel Type Zoom
1/1/2008
1:59 LA ROSE DES ....
--
2:59 WS MUSIC
--
3:21
--
--
--
--
--
Gralness de stars
Option Watch
ConrmingaViewingReservation
You can view, modify or delete a reservation.
1.
Press the MENU button.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button. Press the ▲ or ▼ button to select “Channel List”, then press the
ENTER button.
Mini Guide
Default Guide : Mini Guide
Channel
Channel List
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Signal Information
LNA : Off
2. Press the ◄ button to select “Added Channels”.
3. Press the ▲ or ▼ button to select “Programmed”.
Shows all current reserved programs.
➣
Press the ENTER button.
Modifying a viewing reservation
4.
To select a reservation item to be modied, press the ▲ or ▼ button and
then press the TOOLS button.
5.
Press the ENTER button to select “Change Info”.
6. Press the ▲/▼/◄/► buttons to change a reservation setting and then
press the ENTER button. The reservation modication is applied.
Canceling a reservation
4.
To select a reservation item to be canceled, press the ▲ or ▼ button, and
then press the TOOLS button.
5.
Press the ▲ or ▼ button to select “Cancel Schedules”, then press the
ENTER button.
6. Press the ◄ or ► button to select “OK”, then press the ENTER button.
The viewing reservation has been canceled.
Press the EXIT button to exit.
Programmed Option
Change Info: Select to change a viewing reservation.
•
Cancel Schedules: Select to cancel a viewing reservation.
•
Information: Select to view a viewing reservation.
•
Select All: Select all reserved programs.
•
Programmed
1/1/2008
1:59 5 TV1 Quincy, M.E
6:59 2 TV3 The Equalizer
8:59 2 TV3 McMillan & Wife
9:59 2 TV3 M.Spillane’s mike Hammer
All
Channel Type Zoom Select
Programmed
1/1/2008
1:59 5 TV1 Quincy, M.E
6:59 2 TV3 The Equalizer
8:59 2 TV3 McMillan & Wife
9:59 2 TV3 M.Spillane’s mike Hammer
All
Channel Type Zoom Select
Option Information
Change Info
Cancel Schedules
Information
Select All
Option Information
Press the CH LIST button on the remote control to bring up the channel
O
lists.
English - 18
English - 19
Edit Channel Name-Analogue
Channels can labeled so that their call letters appear whenever the channel is
selected.
1.
Press the MENU button.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”, then press the ENTER
button.
2. Press the ▲ or ▼ button to select the channel to be assigned a new name,
then press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Edit Channel Name”, then press the
ENTER button.
4. Press the ▲/▼/◄/► button to select a letter, then press the ENTER
button.
Numeric buttons: You can enter numbers.
•
Red button: You can switch between English and Characters.
•
Green button: You can delete an already entered character.
•
Yellow button: You can enter a blank space.
•
Blue button: You can nish renaming a channel.
•
5. When you have nished, press the blue button to assign the new name.
Press the EXIT button to exit.
The names of digital broadcasting channels are automatically assigned
➣
and cannot be labelled.
Mini Guide
Default Guide : Mini Guide
Channel
Channel List
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Signal Information
LNA : Off
824 UKTV Gold
Added Channels
825 UKTV style
A 1 C --
A 2 C
A 3 ♥ C
A 4 C
A 5 C
A 6 C
A 7 C
A 8 C
All
Channel Type Zoom Select
803
_
B C D E F G
A
I J K L M NH
P Q R S T UO
W X Y ZV
Delete
Add to Favourite
--
Lock
--
Timer Viewing
--
Edit Channel Name
--
--
Sort
--
--
Edit Channel Name
▼
Option
0~9
0~9
Number
Character
Delete
Blank
Done
Enter ReturnMove
Sorting the Stored Channels-Analogue
This operation allows you to change the programme numbers of the stored
channels. This operation may be necessary after using the auto store.
1.
Press the MENU button.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select a channel, then press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Sort”, then press the ENTER button.
4. Press the ▲ or ▼ button to move to the position in which you would like to
change and then press the ENTER button.
5. Repeat steps 2 to 4 for another channel to be sorted.
6. Press the EXIT button to exit.
Mini Guide
Default Guide : Mini Guide
Channel
Channel List
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Signal Information
LNA : Off
824 UKTV Gold
Added Channels
825 UKTV style
A 1 C --
A 2 C
A 3 ♥ C
A 4 C
A 5 C
A 6 C
A 7 C
A 8 C
All
Channel Type Zoom Select
802 abc1
803 BBC Radio 1
804 BBC Radio 2
805 BBC Radio 3
806 BBC Radio 4
807 BBC World
Move
Add to Favourite
--
Lock
--
Timer Viewing
--
Edit Channel Name
--
Sort
Select All
--
--
--
Sort
▲
▼
Option
▼
ReturnEnter
Editing the Channel Number-Digital
Press the MENU button.
1.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”, then press the ENTER
button.
2.
Select the channel number that you wish to edit by pressing the ▲ or ▼
button repeatedly, then press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Edit Channel Number”, then press the
ENTER button.
4. Then you can edit the Channel Number pressing the ▲ or ▼ button
repeatedly. You can also edit the channel number by pressing the number
buttons on the remote control.
824 Television X
Added Channels
825 UKTV style
825 UKTV style
A 2 C
A 3 ♥ C
A 4 C
A 5 C
A 6 C
A 7 C
A 8 C
All
Channel Type Zoom Select
Edit Channel Number
Channel
803
Delete
Add to Favourite
--
Lock
--
Timer Viewing
--
Edit Channel Number
--
--
Select All
--
--
BBC Radio 1
Name
▼
Option
Selecting and Deselecting All Channels
Press the MENU button.
1.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select the channel, then press the TOOLS
button.
3.
Press the ▲ or ▼ button to select “Select All” or “Deselect All”, then press
the ENTER button.
You can select(or Deselect) all channel in the channel list.
➣
The
➣
mark appears to the left of the selected channels.
Storing Channels in Memory (Auto Store)
1.
Press the MENU button.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select the channel to be assigned a new name,
then press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Auto Store”, then press the ENTER
button.
➣
For further details on setting up options, refer to page 10.
➣
If a channel is locked using the “Child Lock” function, the PIN input window
appears (refer to page 21).
824 UKTV Gold
Added Channels
825 UKTV style
A 1 C --
A 2 C
A 3 ♥ C
A 4 C
A 5 C
A 6 C
A 7 C
A 8 C
All
Channel Type Zoom Select
824 UKTV Gold
Added Channels
825 UKTV style
A 1 C --
A 2 C
A 3 ♥ C
A 4 C
A 5 C
A 6 C
A 7 C
A 8 C
All
Channel Type Zoom Select
Move
--
--
--
--
--
--
--
--
--
--
--
--
--
--
ReturnEnter
Delete
Add to Favourite
Lock
Deselect All
Select All
Auto Store
Option
▲
Lock
Timer Viewing
Edit Channel Name
Sort
Select All
Auto Store
Option
English - 20
English - 21
Setting the Channel Mode
You can display either the added channels list or the favourite channels list when the CH LIST button on the remote control
is pressed.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Default Guide : Mini Guide
Channel List
Channel
Channel Mode : Added Ch. ►
Child Lock : On
Fine Tune
Signal Information
LNA : Off
Press the ▲ or ▼ button to select “Channel Mode”, then press the ENTER
2.
button.
3. Press the ▲ or ▼ button to select “Added Ch.” or “Favourite Ch.”.
Press the ENTER button.
4. Press the EXIT button to exit.
Default Guide : Mini Guide
Channel List
Channel
Channel Mode :
Child Lock : On
Fine Tune
Signal Information
LNA : Off
Favourite Ch.
Added Ch.
Favourite Ch.
►
Activating the Child Lock
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting
out video and audio.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Child Lock”. Press the ENTER button.
2.
3. Enter your 4 digit PIN number.
The default PIN number of a new TV set is “0-0-0-0”.
➣
If you want to change PIN number, refer to 35 page.
➣
Channel List
Channel Mode : Added Ch.
Channel
Child Lock :On ►
Fine Tune
Signal Information
LNA : Off
Child Lock
Enter PIN
* *
*
4.
Press the ▲ or ▼ button to select “On”. Press the ENTER button.
5. Press the EXIT button to exit.
You can lock some channels in Channel List. (refer to page 16)
➣
“Child Lock” is available only in TV mode.
➣
“Child Lock” is not available when PIP is set to on.
➣
If a channel is locked using the “Child Lock” function, the PIN input
➣
window appears when “Auto Store” or “Plug & Play” is selected.
0~9
Channel List
Channel Mode : Added Ch.
Channel
ChildLock :On ►
Fine Tune
Signal Information
LNA : Off
Enter PIN
Return
On
Off
Loading...