Samsung LA32D55KR Schematic

!

"#$%&

'

()*+",

()*+",

-./0

-./0

12*13

4513

678 9:

6; 7813

<=

>?@A

BCD

EF GHD

IJD

IJD

KI

KI #$

IJ

LMD*N OP

QN OP

R STUVW XYZ[\]Y ^_`abcdSTe$fghc ij* kilmnop

VW XYZ[\ qa]Y

riEF

1. Precautions

1. Precautions

1-1. Safety Precautions

Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock.

1-1-1. Warnings

1.For continued safety, do not attempt to modify the circuit board.

2.Disconnect the AC power and DC power jack before servicing.

1-1-2. Servicing the LCD TV

1.When servicing the LCD TV, Disconnect the AC line cord from the AC outlet.

2.It is essential that service technicians have an accurate voltage meter available at all times. Check the calibration of this meter periodically.

1-1-3. Fire and Shock Hazard

Before returning the LCD TV to the user, perform the following safety checks:

1.Inspect each lead dress to make certain that the leads are not pinched or that hardware is not lodged between the chassis and other metal parts in the LCD TV.

2.Inspect all protective devices such as nonmetallic control knobs, insulating materials, cabinet backs, adjustment and compartment covers or shields, isolation resistorcapacitor networks, mechanical insulators, etc.

3.Leakage Current Hot Check (Figure 1-1):

WARNING : Do not use an isolation transformer during this test.

Use a leakage current tester or a metering system that complies with American National Standards Institute (ANSI C101.1, Leakage Current for Appliances), and Underwriters Laboratories (UL Publication UL1410, 59.7).

(READING SHOULD)

NOT BE ABOVE 0.5mA

				LEAKAGE
DEVICE
				CURRENT
UNDER
				TESTER
TEST
	TEST ALL
	EXPOSED METAL
	SURFACES
2-WIRE CORD

*ALSO TEST WITH
PLUG REVERSED
(USING AC ADAPTER
PLUG AS REQUIRED)	EARTH
	GROUND	Figure 1-1. Leakage Current Test Circuit

4.With the unit completely reassembled, plug the AC line cord directly into a 120V AC outlet. With the unit’s AC switch first in the ON position and then OFF, measure the current between a known earth ground (metal water pipe, conduit, etc.) and all exposed metal parts, including: metal cabinets, screwheads and control shafts.

The current measured should not exceed 0.5 milliamp.

Reverse the power-plug prongs in the AC outlet and repeat the test.

1-1-4. Product Safety Notices

Some electrical and mechanical parts have special safetyrelated characteristics which are often not evident from visual inspection. The protection they give may not be obtained by replacing them with components rated for higher voltage, wattage, etc. Parts that have special safety characteristics are identified by on schematics and parts lists. A substitute replacement that does not have the same safety characteristics as the recommended replacement part might create shock, fire and/or other hazards. Product safety is under review continuously and new instructions are issued whenever appropriate.

1-1

1. Precautions

1-2. Servicing Precautions

WARNING: An electrolytic capacitor installed with the wrong polarity might explode.

Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of this manual.

Note: If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions, always follow the safety precautions.

1-2-1 General Servicing Precautions

1.Always unplug the unit’s AC power cord from the AC power source and disconnect the DC Power Jack before attempting to:

(a) remove or reinstall any component or assembly, (b) disconnect PCB plugs or connectors, (c) connect a test component in parallel with an electrolytic capacitor.

2.Some components are raised above the printed circuit board for safety. An insulation tube or tape is sometimes used. The internal wiring is sometimes clamped to prevent contact with thermally hot components. Reinstall all such elements to their original position.

3.After servicing, always check that the screws, components and wiring have been correctly reinstalled. Make sure that the area around the serviced part has not been damaged.

4.Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal panels, input terminals and earphone jacks).

5.Insulation Checking Procedure: Disconnect the power cord from the AC source and turn the power switch ON.

Connect an insulation resistance meter (500 V) to theblades of the AC plug.

The insulation resistance between each blade of the AC plug and accessible conductive parts (see above) should be greater than 1 megohm.

6.Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the positive lead; always remove the instrument’s ground lead last.

1-3. Electrostatically Sensitive Devices (ESD) Precautions

Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly called Electrostatically Sensitive Devices (ESD). Examples of typical ESD are integrated circuits and some field-effect transistors. The following techniques will reduce the incidence of component damage caused by static electricity.

1.Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your body by touching a known earth ground. Alternatively, wear a discharging wrist-strap device. To avoid a shock hazard, be sure to remove the wrist strap before applying power to the LCD TV.

2.After removing an ESD-equipped assembly, place it on a conductive surface such as aluminum foil to prevent accumulation of an electrostatic charge.

3.Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ESDs.

4.Use only a grounded-tip soldering iron to solder or desolder ESDs.

5.Use only an anti-static solder removal device. Some solder removal devices not classified as “anti-static” can generate electrical charges sufficient to damage ESDs.

6.Do not remove a replacement ESD from its protective package until you are ready to install it. Most replacement ESDs are packaged with leads that are electrically shorted together by conductive foam, aluminum foil or other conductive materials.

7.Immediately before removing the protective material from the leads of a replacement ESD, touch the protective material to the chassis or circuit assembly into which the device will be installed.

Caution: Be sure no power is applied to the chassis or circuit and observe all other safety precautions.

8.Minimize body motions when handling unpackaged replacement ESDs. Motions such as brushing clothes together, or lifting your foot from a carpeted floor can generate enough static electricity to damage an ESD.

1-2

1. Precautions

1-4. Installation Precautions

1.For safety reasons, more than a people are required for carrying the product.

2.Keep the power cord away from any heat emitting devices, as a melted covering may cause fire or electric shock.

3.Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal temperature may cause fire.

4.Bend the external antenna cable when connecting it to the product. This is a measure to protect it from being exposed to moisture. Otherwise, it may cause a fire or electric shock.

5.Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause fire or electric shock.

6.Keep the antenna far away from any high-voltage cables and install it firmly. Contact with the highvoltage cable or the antenna falling over may cause fire or electric shock.

7.When installing the product, leave enough space (0.4m) between the product and the wall for ventilation purposes.

A rise in temperature within the product may cause fire.

1-3

2. Product specifications

2. Product specifications

2-1. Feature & Specifications

Model

LA32D55* / LA32D580

Feature

ATV, 4-HDMI, 2-Component, 2-A/V, D-SUB, 2-USB2.0

Brightness : 450cd/m2

High Contrast Ratio : 5,000 :1

Response Time : 8ms

				Specifications
	Item			Description
	LCD Panel	32inch FHD
	Scanning Frequency	Horizontal : 50 kHz ~ 75 kHz (Automatic)
		Vertical : 47 Hz ~ 63 Hz (Automatic)
	Display Colors	16.7 million colors
	Maximum resolution	Horizontal : 1920 Pixels
		Vertical : 1080 pixels
	Input Signal	Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated
	Input Sync Signal	H/V Separate, TTL, P. or N.
	Maximum Pixel Clock rate	80 MHz (Typ 74.25 MHz)
	Active Display	27.50 x 15.47 inches (698.4 (H) x 392.85 (V) mm)
	Horizontal/Vertical
	AC power voltage & Frequency	AC 110V ~ 220V, 60 Hz
	Power Consumption	Under 110W (Under 0.3W, Stand by)
	Set Dimensions (W x D x H)	31.7 x 9.4 x 20.0 inchs (804.7*240.0*563.7 mm)_with stand
		31.7 x 3.2 x 20.0 (804.7*80.3*507.4 mm)_without stand
	Set Weight	550		26.0 Ibs (11.8kg)_with stand
				20.1 Ibs (9.1kg)_without stand
		580		26.0 Ibs (11.8kg)_with stand
				20.1 Ibs (9.1kg)_without stand
	Stand Dimensions (W x D x H)	17.5 x 9.4 x 6.7 inchs (445*240*170 mm)
	Stand Weight	6 Ibs (2.7kg)
	TV System	Tuning	Frequency Synthesize (Refer to detailed Frequency Table)
		System	PAL, SECAM, NT4.43
		Sound	BG, DK, L/L’, NICAM, MPEG1, DD, DD+, HE-AAC
	Environmental Considerations	Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
		Operating Humidity : 10% ~ 80%, non-condensing
		Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
		Storage Humidity : 5% ~ 95%, non-condensing
	Audio Spec.	- MAX Internal speaker Out : Right => 10W, Left => 10W (580 : 20W + 20W)
		- BASS Control Range : -8 dB ~ + 8dB
		- TREBLE Control Range : -8 dB ~ +8 dB
		- Headphone Out : 10 mW MAX
		- Output Frequency : RF : 80 Hz ~ 15 kHz
				A/V : 80 Hz ~ 20 kHz

Note: TruSurround HD, Film Mode, Energy Saving, Anynet+, AllShare

2-1

2. Product specifications

Model

LA37D55*

Feature

ATV, 4-HDMI, 2-Component, 2-A/V, D-SUB, 2-USB2.0Brightness : 500cd/m2

High Contrast Ratio : 5,000 :1Response Time : 6.5ms

				Specifications
	Item			Description
	LCD Panel	37inch FHD
	Scanning Frequency	Horizontal : 60 kHz ~ 73 kHz (Automatic)
		Vertical : 47 Hz ~ 63 Hz (Automatic)
	Display Colors	16.7 million colors
	Maximum resolution	Horizontal : 1920 Pixels
		Vertical : 1080 pixels
	Input Signal	Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated
	Input Sync Signal	H/V Separate, TTL, P. or N.
	Maximum Pixel Clock rate	82 MHz (Typ 74.25 MHz)
	Active Display	32.26 x 18.15 inches (819.36 (H) x 460.89 (V) mm)
	Horizontal/Vertical
	AC power voltage & Frequency	AC 110V ~ 220V, 60 Hz
	Power Consumption	Under 140W (Under 0.3W, Stand by)
	Set Dimensions (W x D x H)	36.4 x 10.0 x 24.8 inchs (923.5x255.0x629.2 mm)_with stand
		36.4 x 3.1 x 22.6 inchs (923.5x78.5x573.2 mm)_without stand
	Set Weight	34.8 Ibs (15.8kg)_with stand
		27.7 Ibs (12.55kg)_without stand
	Stand Dimensions (W x H x D)	18.9 x 10.0 x 6.7 inchs (480x255x170 mm)
	Stand Weight	7.2 Ibs (3.25kg)
	TV System	Tunning		Frequency Synthesize (Refer to detailed Frequency Table)
		System		PAL, SECAM, NT4.43
		Sound		BG, DK, L/L’, NICAM, MPEG1, DD, DD+, HE-AAC
	Environmental Considerations	Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
		Operating Humidity : 10% ~ 80%, non-condensing
		Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
		Storage Humidity : 5% ~ 95%, non-condensing
	Audio Spec.	- MAX Internal speaker Out : Right => 10W, Left => 10W
		- BASS Control Range : -8 dB ~ + 8dB
		- TREBLE Control Range : -8 dB ~ +8 dB
		- Headphone Out : 10 mW MAX
		- Output Frequency : RF : 80 Hz ~ 15 kHz
				A/V : 80 Hz ~ 20 kHz

Note: TruSurround HD, Film Mode, Energy Saving, Anynet+, AllShare

2-2

2. Product specifications

Model

LA40D55*

Feature

ATV, 4-HDMI, 2-Component, 2-A/V, D-SUB, 2-USB2.0Brightness : 500cd/m2

High Contrast Ratio : 6,000 :1Response Time : 8.5ms

				Specifications
	Item			Description
	LCD Panel	40inch FHD
	Scanning Frequency	Horizontal : 48 kHz ~ 75 kHz (Automatic)
		Vertical : 45 Hz ~ 65 Hz (Automatic)
	Display Colors	16.7 million colors
	Maximum resolution	Horizontal : 1920 Pixels
		Vertical : 1080 pixels
	Input Signal	Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated
	Input Sync Signal	H/V Separate, TTL, P. or N.
	Maximum Pixel Clock rate	80MHz (Typ 74.25 MHz)
	Active Display	34.87 x 19.61 inches (885.6 (H) x 498.15 (V) mm)
	Horizontal/Vertical
	AC power voltage & Frequency	AC 110V ~ 220V, 60 Hz
	Power Consumption	Under 150W (Under 0.3W, Stand by)
	Set Dimensions (W x D x H)	39.1 x 10.0 x 26.3 inchs (992.1x255.0x667.2 mm)_with stand
		39.1 x 3.2 x 24.1 inchs (992.1x80.4x611.0 mm)_without stand
	Set Weight	36.4 Ibs (16.5kg)_with stand
		29.2 Ibs (13.25kg)_without stand
	Stand Dimensions (W x D x H)	18.9 x 10.0 x 6.7 inchs (480x255x170 mm)
	Stand Weight	7.2 Ibs (3.25kg)
	TV System	Tunning		Frequency Synthesize (Refer to detailed Frequency Table)
		System		PAL, SECAM, NT4.43
		Sound		BG, DK, L/L’, NICAM, MPEG1, DD, DD+, HE-AAC
	Environmental Considerations	Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
		Operating Humidity : 10% ~ 80%, non-condensing
		Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
		Storage Humidity : 5% ~ 95%, non-condensing
	Audio Spec.	- MAX Internal speaker Out : Right => 10W, Left => 10W
		- BASS Control Range : -8 dB ~ + 8dB
		- TREBLE Control Range : -8 dB ~ +8 dB
		- Headphone Out : 10 mW MAX
		- Output Frequency : RF : 80 Hz ~ 15 kHz
				A/V : 80 Hz ~ 20 kHz

Note: TruSurround HD, Film Mode, Energy Saving, Anynet+, AllShare

2-3

2. Product specifications

Model

LA46D55*

Feature

ATV, 4-HDMI, 2-Component, 2-A/V, D-SUB, 2-USB2.0Brightness : 450cd/m2

High Contrast Ratio : 5,000 :1Response Time : 8 ms

			Specifications
	Item		Description
	LCD Panel	46inch FHD
	Scanning Frequency	Horizontal : 45 kHz ~ 75 kHz (Automatic)
		Vertical : 48 Hz ~ 65 Hz (Automatic)
	Display Colors	16.7 million colors
	Maximum resolution	Horizontal : 1920 Pixels
		Vertical : 1080 pixels
	Input Signal	Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated
	Input Sync Signal	H/V Separate, TTL, P. or N.
	Maximum Pixel Clock rate	80 MHz (Typ 74.25 MHz)
	Active Display	40.08 x 22.55 inches (1018.08 (H) x 572.67 (V) mm)
	Horizontal/Vertical
	AC power voltage & Frequency	AC 110V ~ 220V, 60 Hz
	Power Consumption	Under 210W (Under 0.3W, Stand by)
	Set Dimensions (W x D x H)	44.3 x 10.8 x 29.2 inchs (1124.1x275.0x742.8 mm)_with stand
		44.3 x 3.2 x 27.0 inchs (1124.1x80.4x686.1 mm)_without stand
	Set Weight	47.8 Ibs (21.7kg)_with stand
		39.9 Ibs (18.1kg)_without stand
	Stand Dimensions (W x D x H)	19.5 x 10.8 x 6.7 inchs (495 x 275 x 170 mm)
	Stand Weight	7.9 Ibs (3.6kg)
	TV System	Tunning	Frequency Synthesize (Refer to detailed Frequency Table)
		System	PAL, SECAM, NT4.43
		Sound	BG, DK, L/L’, NICAM, MPEG1, DD, DD+, HE-AAC
	Environmental Considerations	Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
		Operating Humidity : 10% ~ 80%, non-condensing
		Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
		Storage Humidity : 5% ~ 95%, non-condensing
	Audio Spec.	- MAX Internal speaker Out : Right => 10W, Left => 10W
		- BASS Control Range : -8 dB ~ + 8dB
		- TREBLE Control Range : -8 dB ~ +8 dB
		- Headphone Out : 10 mW MAX
		- Output Frequency : RF : 80 Hz ~ 15 kHz
			A/V : 80 Hz ~ 20 kHz

Note: TruSurround HD, Film Mode, Energy Saving, Anynet+, AllShare

2-4

2. Product specifications

Model		LA22D45* / LA22D480
		Feature
ATV, 1-HDMI, 1-Component, 1-A/V, D-SUB, 1-USB2.0
Brightness : 300cd/m2
High Contrast Ratio : 1,000:1
Response Time : 5 ms

					Specifications
	Item				Description
	LCD Panel	22inch FHD
	Scanning Frequency	Horizontal : 60 kHz ~ 73 kHz (Automatic)
		Vertical : 50 Hz ~ 75 Hz (Automatic)
	Display Colors	16.7M color
	Maximum resolution	Horizontal : 1920 Pixels
		Vertical : 1080 Pixels
	Input Signal	Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated
	Input Sync Signal	H/V Separate, TTL, P. or N.
	Maximum Pixel Clock rate	97.98 MHz (Typ 74.25 MHz)
	Active Display	18.77 x 10.56 inches (476.64 (H) x 268.11 (V) mm)
	Horizontal/Vertical
	AC power voltage & Frequency	AC 110V ~ 120V, 60 Hz
	Power Consumption	Under 60W (Under 0.3W, Stand by)
	Set Dimensions (W x D x H)	21.4 x 6.8 x 15.6 nchs (543.4x171.6x395.9 mm)_with stand
		21.4 x 2.4 x 13.9 inchs (543.4x61.9x353.5 mm)_without stand
	Set Weight	450			11.5 Ibs (5.2kg)_with stand
					11.0 Ibs (5.0kg)_without stand
		480			11.9 Ibs (5.4kg)_with stand
					11.5 Ibs (5.2kg)_without stand
	Stand Dimensions (W x D x H)	13.8 x 6.8 x 3.0 inchs (351.7x171.6x75.3 mm)
	Stand Weight	0.5 Ibs (0.25kg)
	TV System	Tunning		Frequency Synthesize (Refer to detailed Frequency Table)
		System		PAL, SECAM, NT4.43
		Sound		BG, DK, L/L’, NICAM, MPEG1, DD, DD+, HE-AAC
	Environmental Considerations	Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
		Operating Humidity : 10% ~ 80%, non-condensing
		Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
		Storage Humidity : 5% ~ 95%, non-condensing
	Audio Spec.	- MAX Internal speaker Out : Right => 3W, Left => 3W (480 : 15W + 15W)
		- BASS Control Range : -8 dB ~ + 8dB
		- TREBLE Control Range : -8 dB ~ +8 dB
		- Headphone Out : 10 mW MAX
		- Output Frequency : RF : 80 Hz ~ 15 kHz
					A/V : 80 Hz ~ 20 kHz

Note: Dolby Digital+, Game Mode, Film Mode, Energy Saving, Anynet+

2-5

2. Product specifications

Model		LA26D45* / LA26D480
		Feature
ATV, 2-HDMI, 2-Component, 2-A/V, D-SUB, 1-USB2.0
Brightness : 450cd/m2
High Contrast Ratio : 3,000:1
Response Time : 8.5 ms

					Specifications
	Item				Description
	LCD Panel	26inch HD
	Scanning Frequency	Horizontal : 43 kHz ~ 53 kHz (Automatic)
		Vertical : 47 Hz ~ 63 Hz (Automatic)
	Display Colors	16.7M color
	Maximum resolution	Horizontal : 1366 Pixels
		Vertical : 768 Pixels
	Input Signal	Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated
	Input Sync Signal	H/V Separate, TTL, P. or N.
	Maximum Pixel Clock rate	82 MHz (Typ 76 MHz)
	Active Display	22.67 x 12.74 inches (575.769 (H) x 323.712 (V) mm)
	Horizontal/Vertical
	AC power voltage & Frequency	AC 110V ~ 120V, 60 Hz
	Power Consumption	Under 85W (Under 0.3W, Stand by)
	Set Dimensions (W x D x H)	26.0 x 8.7 x 19.0 nchs (660.7*222.1*482.8 mm)_with stand
		26.0 x 3.1 x 17.1 inchs (660.7*78.6*435.0 mm)_without stand
	Set Weight	450			14.8 Ibs (6.7kg)_with stand
					13.7 Ibs (6.2kg)_without stand
		480			15.2 Ibs (6.9kg)_with stand
					14.3 Ibs (6.5kg)_without stand
	Stand Dimensions (W x D x H)	17.2 x 8.7 x 3.2 inchs (437.1x222.1x82.0 mm)
	Stand Weight	1.0 Ibs (0.47kg)
	TV System	Tunning		Frequency Synthesize (Refer to detailed Frequency Table)
		System		PAL, SECAM, NT4.43
		Sound		BG, DK, L/L’, NICAM, MPEG1, DD, DD+, HE-AAC
	Environmental Considerations	Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
		Operating Humidity : 10% ~ 80%, non-condensing
		Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
		Storage Humidity : 5% ~ 95%, non-condensing
	Audio Spec.	- MAX Internal speaker Out : Right => 5W, Left => 5W (480 : 15W + 15W)
		- BASS Control Range : -8 dB ~ + 8dB
		- TREBLE Control Range : -8 dB ~ +8 dB
		- Headphone Out : 10 mW MAX
		- Output Frequency : RF : 80 Hz ~ 15 kHz
					A/V : 80 Hz ~ 20 kHz

Note: Dolby Digital+, Game Mode, Film Mode, Energy Saving, Anynet+

2-6

2. Product specifications

Model		LA32D45* / LA32D480
		Feature
ATV, 2-HDMI, 2-Component, 2-A/V, D-SUB, 1-USB2.0
Brightness : 450cd/m2
High Contrast Ratio : 3,500:1
Response Time : 8.5 ms

					Specifications
	Item				Description
	LCD Panel	32inch HD
	Scanning Frequency	Horizontal : 43 kHz ~ 53 kHz (Automatic)
		Vertical : 47 Hz ~ 63 Hz (Automatic)
	Display Colors	16.7M color
	Maximum resolution	Horizontal : 1366 Pixels
		Vertical : 768 Pixels
	Input Signal	Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated
	Input Sync Signal	H/V Separate, TTL, P. or N.
	Maximum Pixel Clock rate	82 MHz (Typ 76 MHz)
	Active Display	27.47 x 15.44 inches (697.685 (H) x 392.256 (V) mm)
	Horizontal/Vertical
	AC power voltage & Frequency	AC 110V ~ 120V, 60 Hz
	Power Consumption	Under 110W (Under 0.3W, Stand by)
	Set Dimensions (W x D x H)	31.3 x 9.9 x 22.5 inchs (795.5*251.7*571.1 mm)_with stand
		31.3 x 3.1 x 20.1 inchs (795.5*77.8*510.3 mm)_without stand
	Set Weight	450			24.0 Ibs (10.85kg)_with stand
					19.0 Ibs (8.6kg)_without stand
		480			24.9 Ibs (11.3kg)_with stand
					21.4 Ibs (9.7kg)_without stand
	Stand Dimensions (W x D x H)	19.8 x 9.9 x 7.1 inchs (503.7x251.7x181.6 mm)
	Stand Weight	5.0 Ibs (2.25kg)
	TV System	Tunning		Frequency Synthesize (Refer to detailed Frequency Table)
		System		PAL, SECAM, NT4.43
		Sound		BG, DK, L/L’, NICAM, MPEG1, DD, DD+, HE-AAC
	Environmental Considerations	Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
		Operating Humidity : 10% ~ 80%, non-condensing
		Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
		Storage Humidity : 5% ~ 95%, non-condensing
	Audio Spec.	- MAX Internal speaker Out : Right => 10W, Left => 10W (480 : 20W + 20W)
		- BASS Control Range : -8 dB ~ + 8dB
		- TREBLE Control Range : -8 dB ~ +8 dB
		- Headphone Out : 10 mW MAX
		- Output Frequency : RF : 80 Hz ~ 15 kHz
					A/V : 80 Hz ~ 20 kHz

Note: Dolby Digital+, Game Mode, Film Mode, Energy Saving, Anynet+

2-7

2. Product specifications

2-2. Detail Factory Option

If you replace the main board with new one, please change the factory option as well. The options you must change are “Type”.

LD550

	Model Name			LA32D550K1R	LA37D550K1R	LA40D550K1R	LA46D550K1R
			Vendor	SEC	AUO	CMI	SEC
		Panel	CODE	BN07-00979A	BN07-00971A	BN07-00953A	BN07-00981A
			SPEC	LTF320HN01	T370HW03 VP	V400H1-L12	LTF460HN01
			Vendor	DYREL	DYREL	SEM	HANSOE
		SMPS	CODE	BN44-00438C	BN44-00439B	BN44-00440A	BN44-00441A
			SPEC	I2632F1_BDY	I37F1_BDY	I40F1_BSM	I46F1_BHS
	Byte	Item	Adjustment Range		ASIA Ready
	1	Factory Reset	-
			19A6TH0C/19I6TH0C/22D6TF0C/
			22I6TF0C/26A6AH0C/26D6AH0C/
			26L6AH0C/32A6AF0C/32A6AH0C/
			32D6AF0C/32L6AH0C/37L6AF0C/
			40A6AF0C/40D6AF0C/40L6AF0C/
	2	Type	46A6AF0C/46D6AF0C/19A6TH0E/	32D6AFOC	37L6AFOC	40A6AFOC	46A6AFOC
			19L6TH0E/22D6TF0E/22L6TF0E/
			23A6TF0E/24L6TF0E/27A6TF0E/
			32A6AH0E/32A6UF0E/32P6AH0E/
			32P6UF0E/32L6UF0E/32L6AH0E/
			37P6UF0E/40A6UF0E/40P6UF0E/
			40H6UF0E/46A6UF0E/46P6UF0E
			EU/EU_ITALY/EU_GER/
			EU_FRANCE/EU_BENELUX/EU_
			UK/EU_ARMENIA/NORDIG/AD_AU/
			AD_NZ/AD_SINGAPOL/
			CIS_RUSIA/CIS_UKRINA/
			CIS_KAZAKH/EU_TURKEY/EU_
			AFRICA/EU_MOROCO/EA_VIET/
			EA_THAI/EA_INA/EA_CHINA/
	3	Local set	EA_INDIA/EA_SRILANKA/EA_	EA_THAI	EA_ARAB	EA_THAI	EA_THAI
			NEPAL/EA_BANGLA/EA_IRAN/
			EA_ISRAEL/EA_EGYPT/EA_LIBYA/
			EA_CIS/EA_M_ASIA/EA_IRAQ/
			EA_ARAB/EA_SAUDI/EA_
			PAKISTAN/EA_E_ASIA/
			EA_AFRICA/EA_S_AFRICA/
			EA_MAL/EA_PHI/ED_IRAN/
			ED_VIET/ED_INA/ED_ISRAEL/
			LD400/LD450/LD480/LD550/
	4	Model	LD570/LD580/UD4000/UD4010/	LD550	LD550	LD550	LD550
			UD5000/UD5500/UD5700
	5	TUNER	SEC_TC/SI_TCS/SI_T2/SEC_ATC	SEC_ATC	SEC_ATC	SEC_ATC	SEC_ATC
			PBA/SUWON/SESK/SEH/SERK/
			SDMA_AU/SDMA_NZ/SDMA_SG/
	6	Ch Table	SEIN/SAVINA/SIEL_C/SIEL_N/	-	-	-	-
			TTSEC/TSED/TSE/IRAN/SESK-T2/
			SUWON-T2/INL
	7	Front Color	L-S-R-BK/L-T-C-BK/U-S-BK/	L-T-C-BK	L-T-C-BK	L-T-C-BK	L-T-C-BK
			U-T-R-BK/U-T-C-BK

2-8

2. Product specifications

LD550 (India/Vietnam)

	Model Name			LA32D550K1R	LA37D550K1R	LA40D550K1R	LA46D550K1R
			Vendor	SEC	AUO	CMI	SEC
		Panel	CODE	BN07-00979A	BN07-00971A	BN07-00953A	BN07-00981A
			SPEC	LTF320HN01	T370HW03 VP	V400H1-L12	LTF460HN01
			Vendor	SEM	DYREL	SEM	HANSOE
		SMPS	CODE	BN44-00438E	BN44-00439C	BN44-00440C	BN44-00441B
			SPEC	II2632F1_BSM	II37F1_BDY	II40F1_BSM	II46F1_BHS
	Byte	Item	Adjustment Range		ASIA Ready
	1	Factory Reset	-
			19A6TH0C/19I6TH0C/22D6TF0C
			/22I6TF0C/26A6AH0C/26D6AH0C
			/26L6AH0C/32A6AF0C/32A6AH0C
			/32D6AF0C/32L6AH0C/37L6AF0C
			/40A6AF0C/40D6AF0C/40L6AF0C
	2	Type	/46A6AF0C/46D6AF0C/19A6TH0E	32D6AFOC	37L6AFOC	40A6AFOC	46A6AFOC
			/19L6TH0E/22D6TF0E/22L6TF0E
			/23A6TF0E/24L6TF0E/27A6TF0E
			/32A6AH0E/32A6UF0E/32P6AH0E
			/32P6UF0E/32L6UF0E/32L6AH0E
			/37P6UF0E/40A6UF0E/40P6UF0E
			/40H6UF0E/46A6UF0E/46P6UF0E
			EU/EU_ITALY
			/EU_GER/EU_FRANCE
			/EU_BENELUX/EU_UK
			/EU_ARMENIA/NORDIG
			/AD_AU/AD_NZ/AD_SINGAPOL
			/CIS_RUSIA/CIS_UKRINA
			/CIS_KAZAKH/EU_TURKEY
			/EU_AFRICA/EU_MOROCO
			/EA_VIET/EA_THAI/EA_INA
	3	Local set	/EA_CHINA/EA_INDIA	EA_INDIA	EA_INDIA	EA_INDIA	EA_INDIA
			/EA_SRILANKA/EA_NEPAL
			/EA_BANGLA/EA_IRAN/EA_ISRAEL
			/EA_EGYPT/EA_LIBYA/EA_CIS
			/EA_M_ASIA/EA_IRAQ/EA_ARAB
			/EA_SAUDI/EA_PAKISTAN
			/EA_E_ASIA/EA_AFRICA
			/EA_S_AFRICA/EA_MAL/EA_PHI
			/ED_IRAN/ED_VIET
			/ED_INA/ED_ISRAEL
			LD400/LD450/LD480/LD550
	4	Model	/LD570/LD580/UD4000/UD4010	LD550	LD550	LD550	LD550
			/UD5000/UD5500/UD5700
	5	TUNER	SEC_TC/SI_TCS/SI_T2/SEC_ATC	SEC_ATC	SEC_ATC	SEC_ATC	SEC_ATC
			PBA/SUWON/ SESK/SEH
			/SERK/SDMA_AU/SDMA_NZ
	6	Ch Table	/SDMA_SG/SEIN/SAVINA/SIEL_C	-	-	-	-
			/SIEL_N/TTSEC/TSED/TSE/IRAN
			/SESK-T2/SUWON-T2/INL
	7	Front Color	L-S-R-BK/L-T-C-BK	L-T-C-BK	L-T-C-BK	L-T-C-BK	L-T-C-BK
			/U-S-BK/U-T-R-BK/U-T-C-BK

2-9

2. Product specifications

LD580 (Sound)

	Model Name			LA32D580K4R
			Vendor	SEC
		Panel	CODE	BN07-00979A
			SPEC	LTF320HN01
			Vendor	DYREL
		SMPS	CODE	BN44-00438D
			SPEC	IS2632F1_BDY
	Byte	Item	Adjustment Range	-
	1	Factory Reset	-
			19A6TH0C/19I6TH0C/22D6TF0C/22I6TF0C/26A6AH0C/26D6AH0C/26L6AH0C/32A6AF0
			C/32A6AH0C/32D6AF0C/32L6AH0C/37L6AF0C/40A6AF0C/40D6AF0C/40L6AF0C/46A6A
	2	Type	F0C/46D6AF0C/19A6TH0E/19L6TH0E/22D6TF0E/22L6TF0E/23A6TF0E/24L6TF0E/27A6	32D6AFOC
			TF0E/32A6AH0E/32A6UF0E/32P6AH0E/32P6UF0E/32L6UF0E/32L6AH0E/37P6UF0E/40
			A6UF0E/40P6UF0E/40H6UF0E/46A6UF0E/46P6UF0E
			EU/EU_ITALY/EU_GER/EU_FRANCE/EU_BENELUX/EU_UK/EU_ARMENIA/NORDIG/
			AD_AU/AD_NZ/AD_SINGAPOL/CIS_RUSIA/CIS_UKRINA/CIS_KAZAKH/EU_TURKEY/
	3	Local set	EU_AFRICA/EU_MOROCO/EA_VIET/EA_THAI/EA_INA/EA_CHINA/EA_INDIA/	EA_INDIA
			EA_SRILANKA/EA_NEPAL/EA_BANGLA/EA_IRAN/EA_ISRAEL/EA_EGYPT/EA_LIBYA/
			EA_CIS/EA_M_ASIA/EA_IRAQ/EA_ARAB/EA_SAUDI/EA_PAKISTAN/EA_E_ASIA/
			EA_AFRICA/EA_S_AFRICA/EA_MAL/EA_PHI/ED_IRAN/ED_VIET/ED_INA/ED_ISRAEL
	4	Model	LD400/LD450/LD480/LD550/LD570/LD580/	LD580
			UD4000/UD4010/UD5000/UD5500/UD5700
	5	TUNER	SEC_TC/SI_TCS/SI_T2/SEC_ATC	SEC_ATC
	6	Ch Table	PBA/SUWON/SESK/SEH/SERK/SDMA_AU/SDMA_NZ/SDMA_SG/SEIN/SAVINA/SIEL_C/	-
			SIEL_N/TTSEC/TSED/TSE/IRAN/SESK-T2/SUWON-T2/INL
	7	Front Color	L-S-R-BK/L-T-C-BK	L-T-C-BK
			/U-S-BK/U-T-R-BK/U-T-C-BK

2-10

2. Product specifications

LD450

	Model Name			LA22D450G1R	LA26D450G1R	LA32D450G1R
			Vendor	CMI	CMI	CMI
		Panel	CODE	BN07-00888A	BN07-00950A	BN07-00951B
			SPEC	M215H1-L03	V260B3-L08	V315B5-L13
			Vendor	SEM	DYREL	SEM
		SMPS	CODE	BN44-00437A	BN44-00438C	BN44-00438A
			SPEC	I22HD_BSM	I2632F1_BDY	I2632F1_BSM
	Byte	Item	Adjustment Range		ASIA Ready
	1	Factory Reset	-
			19A6TH0C/19I6TH0C/22D6TF0C/22I6TF0C/26A6AH0
			C/26D6AH0C/26L6AH0C/32A6AF0C/32A6AH0C/32D6
			AF0C/32L6AH0C/37L6AF0C/40A6AF0C/40D6AF0C/4
	2	Type	0L6AF0C/46A6AF0C/46D6AF0C/19A6TH0E/19L6TH0	22D6TF0C	26D6AH0C	32D6AH0C
			E/22D6TF0E/22L6TF0E/23A6TF0E/24L6TF0E/27A6T
			F0E/32A6AH0E/32A6UF0E/32P6AH0E/32P6UF0E/32
			L6UF0E/32L6AH0E/37P6UF0E/40A6UF0E/40P6UF0E
			/40H6UF0E/46A6UF0E/46P6UF0E
			EU/EU_ITALY/EU_GER/EU_FRANCE/EU_BENELUX/
			EU_UK/EU_ARMENIA/NORDIG/AD_AU/ AD_NZ/
			AD_SINGAPOL/CIS_RUSIA/CIS_UKRINA/CIS_
			KAZAKH/EU_TURKEY/EU_AFRICA/EU_MOROCO/
	3	Local set	EA_VIET/EA_THAI/EA_INA/EA_CHINA/EA_INDIA/	EA_THAI	EA_THAI	EA_THAI
			EA_SRILANKA/EA_NEPAL/EA_BANGLA/EA_IRAN/
			EA_ISRAEL/EA_EGYPT/EA_LIBYA/EA_CIS/EA_M_
			ASIA/EA_IRAQ/EA_ARAB/EA_SAUDI/EA_PAKISTAN/
			EA_E_ASIA/EA_AFRICA/EA_S_AFRICA/EA_MAL/
			EA_PHI/ED_IRAN/ED_VIET/ED_INA/ED_ISRAEL
	4	Model	LD400/LD450/LD480/LD550/LD570/LD580/UD4000/	LD450	LD450	LD450
			UD4010/UD5000/UD5500/UD5700
	5	TUNER	SEC_TC/SI_TCS/SI_T2/SEC_ATC	SEC_ATC	SEC_ATC	SEC_ATC
			PBA/SUWON/SESK/SEH/SERK/SDMA_AU/SDMA_
	6	Ch Table	NZ/SDMA_SG/SEINSAVINA/SIEL_C/SIEL_N/TTSEC/	-	-	-
			TSED/TSE/IRAN/SESK-T2/SUWON-T2/INL
	7	Front Color	L-S-R-BK/L-T-C-BK/U-S-BK/U-T-R-BK/U-T-C-BK	L-S-R-BK	L-S-R-BK	L-S-R-BK

2-11

2. Product specifications

LD450 (India, Vietnam)

	Model Name			LA22D450G1R	LA26D450G1R	LA32D450G1R
			Vendor	CMI	CMI	CMI
		Panel	CODE	BN07-00888A	BN07-00950A	BN07-00951B
			SPEC	M215H1-L03	V260B3-L08	V315B5-L13
			Vendor	SEM	SEM	SEM
		SMPS	CODE	BN44-00437C	BN44-00438E	BN44-00438E
			SPEC	HD_BSM	II2632F1_BSM	II2632F1_BSM
	Byte	Item	Adjustment Range		ASIA Ready
	1	Factory Reset	-
			19A6TH0C/19I6TH0C/22D6TF0C/22I6TF0C/26A6AH0
			C/26D6AH0C/26L6AH0C/32A6AF0C/32A6AH0C/32D6
			AF0C/32L6AH0C/37L6AF0C/40A6AF0C/40D6AF0C/4
	2	Type	0L6AF0C/46A6AF0C/46D6AF0C/19A6TH0E/19L6TH0	22D6TF0C	26D6AH0C	32D6AH0C
			E/22D6TF0E/22L6TF0E/23A6TF0E/24L6TF0E/27A6T
			F0E/32A6AH0E/32A6UF0E/32P6AH0E/32P6UF0E/32
			L6UF0E/32L6AH0E/37P6UF0E/40A6UF0E/40P6UF0E
			/40H6UF0E/46A6UF0E/46P6UF0E
			EU/EU_ITALY/EU_GER/EU_FRANCE/EU_BENELUX/
			EU_UK/EU_ARMENIA/NORDIG/AD_AU/ AD_NZ/
			AD_SINGAPOL/CIS_RUSIA/CIS_UKRINA/CIS_
			KAZAKH/EU_TURKEY/EU_AFRICA/EU_MOROCO/
	3	Local set	EA_VIET/EA_THAI/EA_INA/EA_CHINA/EA_INDIA/	EA_INDIA	EA_INDIA	EA_INDIA
			EA_SRILANKA/EA_NEPAL/EA_BANGLA/EA_IRAN/
			EA_ISRAEL/EA_EGYPT/EA_LIBYA/EA_CIS/EA_M_
			ASIA/EA_IRAQ/EA_ARAB/EA_SAUDI/EA_PAKISTAN/
			EA_E_ASIA/EA_AFRICA/EA_S_AFRICA/EA_MAL/
			EA_PHI/ED_IRAN/ED_VIET/ED_INA/ED_ISRAEL
	4	Model	LD400/LD450/LD480/LD550/LD570/LD580/UD4000/	LD450	LD450	LD450
			UD4010/UD5000/UD5500/UD5700
	5	TUNER	SEC_TC/SI_TCS/SI_T2/SEC_ATC	SEC_ATC	SEC_ATC	SEC_ATC
			PBA/SUWON/SESK/SEH/SERK/SDMA_AU/SDMA_
	6	Ch Table	NZ/SDMA_SG/SEINSAVINA/SIEL_C/SIEL_N/TTSEC/	-	-	-
			TSED/TSE/IRAN/SESK-T2/SUWON-T2/INL
	7	Front Color	L-S-R-BK/L-T-C-BK/U-S-BK/U-T-R-BK/U-T-C-BK	L-S-R-BK	L-S-R-BK	L-S-R-BK

2-12

2. Product specifications

LD480 (Sound)

	Model Name			LA22D480G2R	LA26D480G2R	LA32D480G2R
			Vendor	CMI	CMI	CMI
		Panel	CODE	BN07-00888A	BN07-00950A	BN07-00951B
			SPEC	M215H1-L03	V260B3-L08	V315B5-L13
			Vendor	POWER	DYREL	DYREL
		SMPS	CODE	BN44-00437B	BN44-00438D	BN44-00438D
			SPEC	IS22HD_BPN	IS2632F1_BDY	IS2632F1_BDY
	Byte	Item	Adjustment Range		ASIA Ready
	1	Factory Reset	-
			19A6TH0C/19I6TH0C/22D6TF0C/22I6TF0C/26A6AH0
			C/26D6AH0C/26L6AH0C/32A6AF0C/32A6AH0C/32D6
			AF0C/32L6AH0C/37L6AF0C/40A6AF0C/40D6AF0C/4
	2	Type	0L6AF0C/46A6AF0C/46D6AF0C/19A6TH0E/19L6TH0	22D6TF0C	26D6AH0C	32D6AH0C
			E/22D6TF0E/22L6TF0E/23A6TF0E/24L6TF0E/27A6T
			F0E/32A6AH0E/32A6UF0E/32P6AH0E/32P6UF0E/32
			L6UF0E/32L6AH0E/37P6UF0E/40A6UF0E/40P6UF0E
			/40H6UF0E/46A6UF0E/46P6UF0E
			EU/EU_ITALY/EU_GER/EU_FRANCE/EU_BENELUX/
			EU_UK/EU_ARMENIA/NORDIG/AD_AU/ AD_NZ/
			AD_SINGAPOL/CIS_RUSIA/CIS_UKRINA/CIS_
			KAZAKH/EU_TURKEY/EU_AFRICA/EU_MOROCO/
	3	Local set	EA_VIET/EA_THAI/EA_INA/EA_CHINA/EA_INDIA/	EA_INDIA	EA_INDIA	EA_INDIA
			EA_SRILANKA/EA_NEPAL/EA_BANGLA/EA_IRAN/
			EA_ISRAEL/EA_EGYPT/EA_LIBYA/EA_CIS/EA_M_
			ASIA/EA_IRAQ/EA_ARAB/EA_SAUDI/EA_PAKISTAN/
			EA_E_ASIA/EA_AFRICA/EA_S_AFRICA/EA_MAL/
			EA_PHI/ED_IRAN/ED_VIET/ED_INA/ED_ISRAEL
	4	Model	LD400/LD450/LD480/LD550/LD570/LD580/UD4000/	LD480	LD480	LD480
			UD4010/UD5000/UD5500/UD5700
	5	TUNER	SEC_TC/SI_TCS/SI_T2/SEC_ATC	SEC_ATC	SEC_ATC	SEC_ATC
			PBA/SUWON/SESK/SEH/SERK/SDMA_AU/SDMA_	-	-	-
	6	Ch Table	NZ/SDMA_SG/SEINSAVINA/SIEL_C/SIEL_N/TTSEC/
			TSED/TSE/IRAN/SESK-T2/SUWON-T2/INL
	7	Front Color	L-S-R-BK/L-T-C-BK/U-S-BK/U-T-R-BK/U-T-C-BK	L-S-R-BK	L-S-R-BK	L-S-R-BK

2-13

2. Product specifications

2-3. Specification Comparison to Old Models

 LD550

O : application, X : non-application

Model			D550 (LA**D55*)		C550 (LA**C55*)
Design
Display Type			LCD TV		LCD TV
Built-in Tuner			O		O
Resolution			1920X1080		1920 x 1080
LCD Panel			TFT LCD Panel 60Hz		TFT LCD Panel 60Hz
Screen Size		32"/37"/40"/46"			32"/37"/40"/46"
Picture ratio		16:9			16 : 9
	32"		35.6 x 9.4 x 22.2 inchs_with stand	32"	31.2 x 9.4 x 21.9 inchs_with stand
Dimensions (W x D x H)	37"		36.4 x 10.0 x 24.8 inchs_with stand	37"	35.9 x 10.0 x 25.5 inchs_with stand
	40"		39.1 x 10.0 x 26.3 inchs_with stand	40"	38.6 x 10.0 x 26.0 inchs_with stand
	46"		44.3 x 10.8 x 29.2 inchs_with stand	46"	43.8 x 10.8 x 29.0 inchs_with stand
	32"		26.0 Ibs with stand	32"	25.35 Ibs_with stand
Weight	37"		34.8 Ibs_with stand	37"	32.85Ibs_with stand
	40"		36.4 Ibs_with stand	40"	40.12Ibs_with stand
	46"		47.8 Ibs_with stand	46"	47.84Ibs_with stand
Dynamic Contrast Ratio			High Contrast		High Contrast
Picture Engine			HyperReal Engine		HyperReal Engine
Equalizer			O		O
Auto Volume Control			O		O
Sound System		Dolby Digital+ / SRS TheaterSound HD			Dolby Digital+ / DNSe or Virtual Surroun
Speaker Output			10W + 10W		10W + 10W
PIP			O		O
Double Window			X		X
TTX			O		O
Entertainment Mode			O (PC mode)		X
Game Mode			O		O
Energy Saving			O		O
Anynet+			O		O
AllShare			O		O
Antenna			1(Air)		1(Air)

2-14

		2. Product specifications
 LD580
O : application, X : non-application
Model	D580 (LA32D580)	C590 (LA32C590)
Design
Display Type	LCD TV	LCD TV
Built-in Tuner	O	O
Resolution	1920X1080	1920X1080
LCD Panel	TFT LCD Panel 60Hz	TFT LCD Panel 60Hz
Screen Size	32"	32"
Picture ratio	16 : 9	16 : 9
Dimensions (W x D x H)	35.6 x 9.4 x 22.2 inchs_with stand	30.8 x 9.7 x 22.1 inchs_with stand
Weight	26.50Ibs with stand	24.25 Ibs_with stand
Dynamic Contrast Ratio	High Contrast	High Contrast
Picture Engine	HyperReal Engine	HyperReal Engine
Equalizer	O	O
Auto Volume Control	O	O
Sound System	Dolby Digital+ / SRS TheaterSound HD	Dolby Digital+ / DNSe or Virtual Surroun
Speaker Output	20W + 20W	20W + 20W
PIP	O	O
Double Window	X	X
TTX	O	O
Entertainment Mode	O (PC mode)	X
Game Mode	O	O
Energy Saving	O	O
Anynet+	O	O
AllShare	O	O
Antenna	1(Cable/Air)	1(Cable/Air)

2-15

2. Product specifications

 LD450

O : application, X : non-application

Model				D450 (LE**D45*)			C450 (LE**C45*)
Design
Display Type				LCD TV			LCD TV
Built-in Tuner				O			O
Resolution				1366X768 (22" : 1920X1080)			1366X768
LCD Panel				TFT LCD Panel 60Hz			TFT LCD Panel 60Hz
Screen Size				22"/26"/32"			22"/26"/32"
Picture ratio				16 : 9			16 : 9
			22"	21.4 x 6.8 x 15.6 inches_with stand	22"		21.0 x 6.8 x 15.9 inches_with stand
Dimensions (W x D x H)			26"	26.0 x 8.7 x 19.0 inchs _with stand	26"		25.5 x 8.8 x 17.0 inchs _with stand
			32"	31.3 x 9.9 x 22.5 inchs _with stand	32"		26.0 x 9.7 x 22.8 inchs _with stand
			22"	11.5 Ibs lbs_with stand	22"		11.99 lbs_with stand
Weight			26"	14.8 Ibs_with stand	26"		14.66 Ibs_with stand
			32"	24.0 Ibs_with stand	32"		20.30 Ibs_with stand
Dynamic Contrast Ratio				High Contrast			High Contrast
Picture Engine				HyperReal Engine			No (SETD-10)
Equalizer				O			O
Auto Volume Control				O			O
Sound System			Dolby Digital+ / SRS TheaterSound HD			Dolby Digital+ / DNSe or Virtual Surroun
			22"	3W + 3W	22"		3W + 3W
Speaker Output			26"	5W + 5W	26"		5W + 5W
			32"	10W + 10W	32"		10W + 10W
PIP				O			O
Double Window				X			X
Entertainment Mode				O (PC mode)			X
Game Mode				O			O
Energy Saving				O			O
Anynet+				O			O
Antenna				1(Cable/Air)			1(Cable/Air)

2-16

2. Product specifications

 LD480

O : application, X : non-application

Model				D480 (LA**D48*)			C480 (LA**C48*)
Design
Display Type				LCD TV			LCD TV
Built-in Tuner				O			O
Resolution				1366X768 (22" : 1920X1080)			1366X768
LCD Panel				TFT LCD Panel 60Hz			TFT LCD Panel 60Hz
Screen Size				22"/26"/32"			22"/26"/32"
Picture ratio				16 : 9			16 : 9
			22"	21.4 x 6.8 x 15.6 inches_with stand	22"		20.9 x 6.8 x 15.9 inches_with stand
Dimensions (W x D x H)			26"	26.0 x 8.7 x 19.0 inchs _with stand	26"		25.4 x 8.5 x 18.8 inchs _with stand
			32"	31.3 x 9.9 x 22.5 inchs _with stand	32"		30.8 x 9.7 x 22.1 inchs _with stand
			22"	11.9 Ibs lbs_with stand	22"		11.68 lbs_with stand
Weight			26"	15.2 Ibs_with stand	26"		15.43 Ibs_with stand
			32"	24.9 Ibs_with stand	32"		24.25 Ibs_with stand
Dynamic Contrast Ratio				High Contrast			High Contrast
Picture Engine				HyperReal Engine			No (SETD-10)
Equalizer				O			O
Auto Volume Control				O			O
Sound System			Dolby Digital+ / SRS TheaterSound HD			Dolby Digital+ / DNSe or Virtual Surroun
			22"	15W + 15W	22"		15W + 15W
Speaker Output			26"	15W + 15W	26"		15W + 15W
			32"	20W + 20W	32"		20W + 20W
PIP				O			O
Double Window				X			X
Entertainment Mode				O (PC mode)			X
Game Mode				O			O
Energy Saving				O			O
Anynet+				O			O
Antenna				1(Cable/Air)			1(Cable/Air)

2-17

2. Product specifications

2-4. New Features explanation

2-4-1. Anynet+

What is Anynet+? TOOLST

Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.

N For the method of connecting external devices, refer to the supported user manual.

NOTE

●Connect the Optical cable between the DIGITALAUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theatre.

●When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home Theatre’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITALAUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV.

●You can connect only one Home Theatre.

●You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.

●Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.

●Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

	Anynet+ Menu	Description
	View TV	Changes Anynet+ mode to TV broadcast mode.
	Device List	Shows the Anynet+ device list.
	(device_name) MENU	Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the
		DVD recorder will appear.
	(device_name) TOOLS	Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play
		menu of the DVD recorder will appear.
		Shows the title menu of the connected device. E.g. If a DVD recorder is connected, the title menu
	(device_name) Title Menu	of the DVD recorder will appear.
		NDepending on the device, this menu may not be available.
	Recording: (*recorder)	Starts recording immediately using the recorder. (This is only available for devices that support
		the recording function.)
	Stop Recording: (*recorder)	Stops recording.
	Receiver	Sound is played through the receiver.

If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).

Setting Up Anynet+

►Anynet+ (HDMI-CEC)

Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.

N When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.

N If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off. However, a device may not turn off if recording is in progress.

N May not be enabled depending on the device.

2-18

2. Product specifications

Switching between Anynet+ Devices

1.Press the TOOLS button, then select Anynet+ (HDMI-CEC).

2.Anynet+ devices connected to the TV are listed in Device List.

NIf you cannot find a device you want, press the Abutton to refresh the list.

3.Select a device and press the ENTEREEbutton. You can switch to the selected device.

N Only when you set Anynet+ (HDMI-CEC) to On in the System menu, the Device List menu appears.

●Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation.

●If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.

Recording

You can make a recording of a TV Programme using a Samsung recorder.

1.Select Recording.

NWhen there are more than two recording devices

●When multiple recording devices are connected, the recording devices are listed. Select one recording device in the Device List.

●When the recording device is not displayed, select Device List and press the Abutton to searchdevices.

2.Press the EXIT button to exit.

N You can record the source streams by selecting Recording: (device_name).

N Pressing the ∏(REC) button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded.

N Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device’s users manual.

Listening through a Receiver

You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker.

1.Select Receiver and set to On.

2.Press the EXIT button to exit.

N If your receiver supports audio only, it may not appear in the device list.

N The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.

NWhen the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver.

NOTE

●You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.

●The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.

●The Anynet+ functions do not operate with other manufacturers’ products.

2-19

2. Product specifications

Troubleshooting for Anynet+

	Problem	Possible Solution
		• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
		• Only one receiver (home theatre) can be connected.
	Anynet+ does not work.	• Check if the Anynet+ device power cord is properly connected.
		• Check the Anynet+ device’s Video/Audio/HDMI cable connections.
		• Check whether Anynet+ (HDMI-CEC) is set to On in the System menu.
		• Check whether the TV remote control is in TV mode.
		• Check whether the remote control is Anynet+ compatible.
		• Anynet+ does not work in certain situations. (Searching channels, operating My Downloads or
	Anynet+ does not work.	Plug & Play (initial setup), etc.)
		• When connecting or removing the HDMI cable, please make sure to search devices again or
		turn your TV off and on again.
		• Check if the Anynet+ Function of Anynet+ device is set on.
		• Check if the Anynet+ device is properly connected to the TV and check if the Anynet+(HDMI-
	I want to start Anynet+.	CEC) is set to On in the System menu.
		• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
		• Select View TV in the Anynet+ menu.
		• Press the SOURCE button on the TV remote control and select a device other than Anynet+
	I want to exit Anynet+.	devices.
		• Press < CH >, CH LIST , PRE-CH, and FAV.CH to change the TV mode. (Note that the
		channel button operates only when a tuner-embedded Anynet+ device is not connected.)
	The message	• You cannot use the remote control when you are configuring Anynet+ or switching to a view
	"Connecting to Anynet+	mode.
	device..."appears on the screen.	• Use the remote control when the Anynet+ setting or switching to view mode is complete.
	The Anynet+ device does not	• You cannot use the play function when Plug & Play (initial setup) is in progress.
	play.
		• Check whether or not the device supports Anynet+ functions.
		• Check whether or not the HDMI cable is properly connected.
	The connected device is not	• Check whether Anynet+ (HDMI-CEC) is set to On in the System menu.
		• Search Anynet+ devices again.
	displayed.	• You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not
		support Anynet+ functions.
		• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power
		cord or a power failure, please repeat the device scan.
	The TV Programme cannot be	• Check whether the antenna jack on the recording device is properly connected.
	recorded.
	The TV sound is not output	• Connect the optical cable between TV and the receiver.
	through the receiver.

2-20

2. Product specifications

2-4-2. Using the My Downloads

Using the My Downloads

Enjoy photos, music and/or movie files saved on a USB Mass Storage Class (MSC) device and/or your PC.

1.Press the CONTENT button to select My Downloads.

2.Press u/dbutton to select desired menu

(Videos,Photos,Music), then press the ENTEREE button.

* It may differ depending on the model.

2-21

2. Product specifications

Connecting a USB Device

1.Turn on your TV.

2.Connect a USB device containing photo, music and/ or movie files to the USB jack on the side of the TV.

3.When USB is connected to the TV, popup window appears. Then you can select Connected Device.

* It may differ depending on the model. NIt might not work properly with unlicensed multimedia files.

NNeed-to-Know List before using My Downloads

●MTP (Media Transfer Protocol) is not supported.

●The file system supports FAT16, FAT32 and NTFS.

●Certain types of USB Digital camera and audio devices may not be compatible with this TV.

●My Downloads only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port.

●Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.

●USB (HDD) is not supported. (for LCD 450 series)

●Connect a USB HDD to the dedicated port, USB 1 (HDD) port. (for LCD 550 series and above)

●Do not disconnect the USB device while it is loading.

●The higher the resolution of the image, the longer it takes to display on the screen.

●The maximum supported JPEG resolution is 15360X8640 pixels.

●For unsupported or corrupted files, the “Not Supported File Format” message is displayed.

●If the files are sorted by Folder View, up to 1000 files can be displayed in each folder.

●MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.

●If more than 2 PTP devices are connected, you can only use one at a time.

●If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high power (more than 500mA or 5V) may not be supported.

●If an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction.

●If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.

●The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.

●If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.

●If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is not played, connect the USB device to the PC, format the device and check the connection.

●If a file deleted from the PC is still found when My Downloads is run, use the “Empty the Recycle Bin” function on the PC to permanently delete the file.

2-22

2. Product specifications

Connecting to the PC through network

You can play pictures, music and videos saved on your PC or on your TV through a network connection in the My Downloads mode.

NIf you want to use My Downloads to play files saved on your PC over your TV, you should download “PC Share Manager” and users manual from “www.samsung.com.”

1.For more information on how to configure your network, refer to ‘Network Connection’.

-You are recommended to locate both TV and PC in same subnet. The first 3 parts of the subnet address of the TV and the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address: 123.456.789.**)

2.Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager programme will be installed.

-You can connect the TV to the PC directly without connecting it through a Sharer (Router).

NFunctions that are not supported when connecting to a PC through a network:

●The Background Music and Background Music Setting functions.

●The π (REW) or µ(FF) button while a movie is playing.

NThe Divx DRM, Multi-audio, embedded caption does not supported.

NSamsung PC Share manager should be permitted by the firewall programme on your PC.

NWhen you use My Downloads mode through a network connection, according to functions of the provided server:

●The sorting method may vary.

●The π (REW), µ(FF) or ∑ (Pause) buttons may not work depending on the content information.

NIf you experience any file stuttering issue while playing a video over a wireless network, we recommend using a wired network.

Screen Display

Move to the desired file using the l/r/u/dbuttons and then press the ENTEREEor ∂ (Play) button. The file is played. My Downloads screen may differ depending on the way to enter the screen.

Information:

You can ascertain the selected device name, contents mode, folder/ file name, page and sorting list.

ContentsGmodeG/GDeviceGname:

You can select the desired Contents mode or Device name. When PC is connected, you can select PC through PC Share Manager.

File List Section:

You can confirm the files and groups that are sorted by category.

GPage TTools R Return

OperationGButtons:

-GC Yellow (EditGMode ); Selects the desired music. The check box is shown in the screen to check the music you want. It is only available in Music.

- (Page); Move to next or previous page.

-TGTools; Displays the option menu.

-RGReturn; Move to the previous step.

2-23

2. Product specifications

Videos

Playing Video

1.Press the l/r/u/dbutton to select the desired video in the file list.

2.Press ENTEREEbutton or ∂(Play) button.

-The selected file name is displayed on the top with its playing time.

-If video time information is unknown, play time and progress bar are not displayed.

-During video playback, you can search using land rbutton.

-You can use π(REW) and µ(FF) buttons during playback.

NIn this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself. ● Supported Subtitle Formats

Name	File extension	Format
MPEG-4 time-based text	.ttxt	XML
SAMI	.smi	HTML
SubRip	.srt	string-based
SubViewer	.sub	string-based
Micro DVD	.sub or .txt	string-based

● Supported Video Formats

	File Extention	Container	Video Codec	Resolution	Frame rate	Bit rate	Audio Codec
					(fps)	(Mbps)
			Divx 3.11/4.x/5.1/6.0	1920 x 1080	6 ~ 30	8
							MP3/AC3
			XviD	1920 x 1080	6 ~ 30	8
	*.avi	AVI					/LPCM
			H.264 BP/MP/HP	1920 x 1080	6 ~ 30	25
	*.mkv	MKV					/ADPCM
			MPEG4 SP/ASP	1920 x 1080	6 ~ 30	8
							/DTS Core
			Motion JPEG	640 x 480	6 ~ 30	8
			Divx 3.11/4.x/5.1/6.0	1920 x 1080	6 ~ 30	8
							MP3/AC3
			XviD	1920 x 1080	6 ~ 30	8
							/LPCM
	*.asf	ASF	H.264 BP/MP/HP	1920 x 1080	6 ~ 30	25
							/ADPCM
			MPEG4 SP/ASP	1920 x 1080	6 ~ 30	8
							/WMA
			Motion JPEG	640 x 480	6 ~ 30	8
	*.wmv	ASF	Window Media	1920 x 1080	6 ~ 30	25	WMA
			Video v9
			H.264 BP/MP/HP	1920 x 1080	6 ~ 30	25	MP3/ADPCM
	*.mp4	MP4	MPEG4 SP/ASP	1920 x 1080	6 ~ 30	8
							/AAC
			XVID	1920 x 1080	6 ~ 30	8
	*.3gp	3GPP	H.264 BP/MP/HP	1920 x 1080	6 ~ 30	25	ADPCM/AAC
			MPEG4 SP/ASP	1920 x 1080	6 ~ 30	8	/HE-AAC
	*.vro	VRO	MPEG2	1920 x 1080	24/25/30	30	AC3/MPEG
		VOB	MPEG1	1920 x 1080	24/25/30	30	/LPCM
	" *.mpg		MPEG1	1920 x 1080	24/25/30	30	AC3/MPEG
		PS	MPEG2	1920 x 1080	24/25/30	30
	*.mpeg "						/LPCM/AAC
			H.264	1920 x 1080	6 ~ 30	25
	*.ts		MPEG2	1920 x 1080	24/25/30	30	AC3/AAC
	*.tp	TS	H.264	1920 x 1080	6 ~ 30	25	/MP3/DD+
	*.trp						/HE-AAC
			VC1	1920 x 1080	6 ~ 30	25

2-24