Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country |
Customer Care Centre |
Web Site |
AUSTRALIA |
1300 362 603 |
www.samsung.com/au |
CHINA |
400-810-5858 |
www.samsung.com/cn |
|
010-6475 1880 |
|
|
HONG KONG:3698 - 4698 |
www.samsung.com/hk |
INDIA |
3030 8282 |
www.samsung.com/in |
|
1-800-3000-8282 |
|
|
1800 110011 |
|
INDONESIA |
0800-112-8888 |
www.samsung.com/id |
JAPAN |
0120-327-527 |
www.samsung.com/jp |
MALAYSIA |
1800-88-9999 |
www.samsung.com/my |
NEW ZEALAND |
0800 SAMSUNG (0800 726 786) |
www.samsung.com/nz |
PHILIPPINES |
1-800-10-SAMSUNG(726-7864) |
www.samsung.com/ph |
|
1-800-3-SAMSUNG(726-7864) |
|
|
02-5805777 |
|
SINGAPORE |
1800-SAMSUNG(726-7864) |
www.samsung.com/sg |
THAILAND |
1800-29-3232 |
www.samsung.com/th |
02-689-3232 |
|
|
|
|
|
TAIWAN |
0800-329-999 |
www.samsung.com/tw |
VIETNAM |
1 800 588 889 |
www.samsung.com/vn |
SOUTH AFRICA |
0860-SAMSUNG(726-7864 ) |
www.samsung.com/za |
U.A.E |
800-SAMSUNG (726-7864) |
www.samsung.com/ae |
|
8000-4726 |
|
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/hk
Model |
|
Serial No. |
BN68-01029Q-00
License
TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
●Do not display still image and partially still on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
●Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the
left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
●Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
©2009 Samsung Electronics Co., Ltd. All rights reserved.
Contents |
|
CONNECTING AND PREPARING YOUR TV |
|
■Viewing the Control Panel.................................................................. |
2 |
■Accessories........................................................................................ |
3 |
■Viewing the Connection Panel........................................................... |
3 |
■Viewing the Remote Control............................................................... |
5 |
■Installing Batteries in the Remote Control.......................................... |
5 |
OPERATION |
|
■Viewing the menus............................................................................. |
6 |
■Plug & Play Feature........................................................................... |
7 |
CHANNEL CONTROL |
|
■Configuring the Channel Menu.......................................................... |
8 |
■Managing Channels......................................................................... |
10 |
PICTURE CONTROL |
|
■Configuring the Picture Menu........................................................... |
12 |
■Using Your TV as a Computer (PC) Display..................................... |
14 |
■Setting up the TV with your PC........................................................ |
15 |
SOUND CONTROL |
|
■Configuring the Sound Menu........................................................... |
16 |
■Selecting the Sound Mode............................................................... |
17 |
Symbol
N |
O |
T |
Note |
One-Touch Button |
TOOLS Button |
SETUP |
|
■Configuring the Setup Menu............................................................ |
18 |
INPUT / SUPPORT |
|
■Configuring the Input Menu.............................................................. |
20 |
■Configuring the Support Menu......................................................... |
21 |
ANYNET+ |
|
■Connecting Anynet+ Devices........................................................... |
22 |
■Setting Up Anynet+.......................................................................... |
23 |
■Switching between Anynet+ Devices............................................... |
24 |
■Recording......................................................................................... |
25 |
■Listening through a Receiver (Home theatre).................................. |
25 |
■Troubleshooting for Anynet+............................................................ |
26 |
RECOMMENDATIONS |
|
■Installing the Stand........................................................................... |
27 |
■Disconnecting the Stand.................................................................. |
27 |
■Installing the Wall Mount Kit............................................................. |
27 |
■Anti-Theft Kensington Lock.............................................................. |
28 |
■Securing the TV to the Wall.............................................................. |
28 |
■Troubleshooting: Before Contacting Service Personnel................... |
29 |
■Specifications................................................................................... |
30 |
English -
CONNECTING AND PREPARING YOUR TV
NFigures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice in order to enhance product performance.
¦Viewing the Control Panel
NThe product colour and shape may vary depending on the model.
N You can use a button by pressing the side panel buttons.
1
2
3
4
5
6 |
8 76 |
1SOURCEE
Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.
2MENU
Press to see an on-screen menu of your TV’s features.
3– VOL +
Press to increase or decrease the volume.
In the on-screen menu, use the – VOL + buttons as you would use the ◄ and ► buttons on the remote control.
4>CH <
Press to change channels. In the on-screen menu, use the >CH <buttons as you would use the ▼ and ▲ buttons on the remote control.
5P(POWER)
Press to turn the TV on and off.
6SPEAKERS
7REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
8POWER INDICATOR
Blinks and turns off when the power is on and lights up in stand-by mode.
English -
¦ Accessories
Remote Control & Batteries (AAA x 2) |
Power Cord |
Cleaning Cloth |
|
|
|
(M8 X L16) |
Cover-Bottom |
|
Stand Screw X 8 |
|
|
|
|
|
|
|
|
|
● Owner’s Instructions |
● Warranty card |
● Safety Guide |
● Registration Cards |
|
|
|
|
N Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. N Warranty card / Safety Guide / Registration Cards (Not available in all locations)
N The items colour and shape may vary depending on the model.
¦Viewing the Connection Panel
[TV Side Panel] |
6 |
AV IN 2 |
9 |
|
[TV Rear Panel] |
|
|
|
|
1 |
2 3 |
4 |
5 |
|
6 |
|
|
|
VIDEO |
|
Power Input |
0 8 |
|
9 |
|
8 |
7 |
NThe product color and shape may vary depending on the model.
1DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component such as a Home theater receiver.
2PC IN
Connects to the video and audio output jacks on your PC.
3PC/DVI AUDIO IN
Connect to the audio output jack on your PC. DVI audio outputs for external devices.
English -
4ANT 1 IN (AIR) / ANT 2 IN (CABLE)
Connects to an antenna or cable TV system.
5AUDIO OUT [R-AUDIO-L]
Connects to the audio input jacks on your Amplifier/Home theater.
6HDMI IN 1(DVI), 2, 3
Connects to the HDMI jack of a device with an HDMI output.
N No sound connection is needed for an HDMI to HDMI connection.
N Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for video connection and the PC / DVI AUDIO IN jacks for audio. When using an HDMI / DVI cable connection, you must use the HDMI IN 1(DVI) jack.
7KENSINGTON LOCK
The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a locking device, contact the dealer where you purchased the TV.
N The location of the Kensington Lock may be different depending on its model.
8SERVICE
Connector for service only.
9COMPONENT IN 1, 2
Connects Component video / audio. The COMPONENT IN 1 jack is also used as the AV IN 1 jack.
N Connect the video cable to the COMPONENT IN 1 [Y/VIDEO] jack and the audio cable to the COMPONENT IN 1 [R- AUDIO-L] jacks.
AV IN 1, 2 [VIDEO] / [R-AUDIO-L]
Video and audio inputs for external devices, such as a camcorder or VCR.
0H(HEADPHONE)
Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled.
N Using the sound function is restricted when connecting headphones to the TV. N Prolonged use of headphones at a high volume may damage your hearing.
N You will not hear sound from the speakers when you connect headphones to the TV. N The headphone volume and TV volume are adjusted separately.
English -
¦ Viewing the Remote Control
N You can use the remote control up to a distance of about 23 feet from the TV. N The performance of the remote control may be affected by bright light.
N The product colour and shape may vary depending on the model.
1POWER : Television Standby button.
2NUMBER BUTTONS : Press to change the channel.
3E: Performs the same function as the ENTEREkey of the directional keys. When switching channels with the numeric buttons, and you press the channel number and then the ENTEREkey, the channel is immediately switched.
4Y: Press to increase or decrease the volume.
5SOURCE : Press to display and select the available video sources.
6CH LIST : Displays the Channel List on screen
7TOOLS : Use to quickly select frequently used functions.
8INFO : Press to display information on the TV screen.
9COLOUR BUTTONS : Use these buttons in the Channel list menus etc.
0TTX/MIX : TEXT function in MHEG (This function is not available in some territories).
! TV : Selects the TV mode directly.
@PRE-CH : Enables you to return to the previous channel you were watching.
#MUTEM: Press to temporarily cut off the sound.
$ P </P >: Press to change channels.
%MENU : Displays the main onscreen menu
^FAV.CH : Used to display Favourites Channel Lists on the screen.
&RETURN : Returns to the previous menu
*UP▲ / DOWN▼ / LEFT◄ / RIGHT► / ENTERE: Use to select on-screen menu items and change menu values.
( EXIT : Press to exit the menu.
) SUBT. : Digital subtitle display
aGUIDE : Electronic Programme
Guide (EPG) display.
1 |
! |
2 |
|
3 |
@ |
|
# |
4 |
$ |
|
|
5 |
% |
|
|
6 |
^ |
7 |
& |
|
* |
8 |
( |
9 |
|
0 |
) |
|
a |
¦Installing Batteries in the Remote Control
1.Lift the cover at the back of the remote control upward as shown in the figure.
2.Install two AAA size batteries.
N Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the compartment.
3.Replace the cover.
NRemove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.
NIf the remote control doesn’t work, check the following:
–Is the TV power on?
–Are the plus and minus ends of the batteries reversed?
–Are the batteries drained?
–Is there a power outage or is the power cord unplugged?
–Is there a special fluorescent light or neon sign nearby?
English -
OPERATION
¦ Viewing the menus
Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.
MENU Button |
|
Display the main on-screen menu. |
|
|
RETURN Button |
ENTERE/ DIRECTION Buttons |
Return to the previous menu. |
|
|
Move the cursor and select an |
|
item. Select the currently selected |
|
item. Confirm the setting. |
EXIT |
|
Exit the on-screen menu. |
Operation the OSD (On Screen Display)
The access step may differ depending on the selected menu. 1. Press the MENU button.
2.The main menu appears on the screen. The menu’s left side has icons : Picture, Sound,
Channel, Setup, Input, Application, Support.
3.Press the ▲ or ▼ button to select one of the icons.
4.Then press the ENTEREbutton to access the icon’s sub-menu.
5.Press the ▲ or ▼ button to select the icon’s submenu.
6.Press the ◄ or ► button to decrease or increase the value of a particular item. The adjustment OSD may differ depending on the selected menu.
7.Press the ENTEREbutton to complete the configuration. Press the EXIT button to exit.
Picture |
Mode |
: Standard |
|
||
|
Backlight |
: 8 |
|
Contrast |
: 95 |
|
Brightness |
: 45 |
|
Sharpness |
: 50 |
|
Color |
: 50 |
|
Tint (G/R) |
: G50/R50 |
Picture |
Mode |
: Standard ► |
|
||
|
Backlight |
: 8 |
|
Contrast |
: 95 |
|
Brightness |
: 45 |
|
Sharpness |
: 50 |
|
Color |
: 50 |
|
Tint (G/R) |
: G50/R50 |
|
Backlight |
8 |
|
UMove LAdjust |
EEnter RReturn |
Help icon
English -
¦ Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1.Press the POWER button on the remote control. The message Select the OSD Language. is displayed. Press the ENTEREbutton. Select the appropriate language by pressing the
▲ or ▼ button. Press the ENTERE button to confirm your choice.
2. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTEREbutton. |
|
|
|
|
N We recommend setting the TV to Home Use mode for the best picture in your home |
|
|
|
|
environment. |
Plug & Play |
|||
N Store Demo mode is only intended for use in retail environments. |
Select the OSD Language. |
|
|
|
|
|
English |
|
|
N If the unit is accidentally set to Store Demo mode and you want to return to Home Use |
Menu Language |
: |
|
|
|
|
|
|
|
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, |
|
|
|
|
press and hold the MENU button on the TV for 5 seconds. |
|
|
E Enter |
3.Press the ▲ or ▼ button to selectAir,Cable orAuto, then press the ENTERE button.
●Air: Air antenna signal.
●Cable: Cable antenna signal.
●Auto: Air and Cable antenna signals.
4.Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTEREbutton to select Start.
●Digital & Analogue: Digital and Analogue channels.
●Digital: Digital channels.
●Analogue: Analogue channels.
N The channel search will start and end automatically.
N Press the ENTEREbutton at any time to interrupt the memorization process.
NAfter all the available channels are stored, the message Set the Clock Mode. is displayed.
5.Press the ENTEREbutton. Press the ▲ or ▼ button to select Auto, then Press the ENTEREbutton.
NIf you select Manual, Set current date and time is displayed.
NIf you have received a digital signal, the time will be set automatically. If not, select Manual to set the clock.
6.The description for the connection method providing the best HD screen quality is displayed. Check the description and press the ENTEREbutton.
7.The message Enjoy your TV. is displayed. When you have finished, press the ENTEREbutton.
NEven if the ENTEREbutton is not pressed, the message will automatically disappear after several seconds.
If you want to reset this feature...
1.Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTEREbutton.
2.Press the ENTEREbutton again to select Plug & Play.
3.Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.
N If you want to change PIN number, use the Change PIN function. (refer to page 19) N The Plug & Play feature is only available in the TV mode.
English -
CHANNEL CONTROL
¦ Configuring the Channel Menu
Antenna
Your TV can memorize both Air and Cable channels.
N If the antenna is connected to ANT 1 IN (AIR), select “Air” and if it is connected to ANT 2 IN(CABLE), select “Cable”.
N If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are connected, select the antenna input you want.
N If the antenna input is not selected properly, noise may appear on the screen.
Auto Store
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme numbers.
N If a channel is locked using the Child Lock function, the PIN input window appears.
Air / Cable / Auto
Channel
Attenna |
:Air |
► |
Auto Store |
|
|
Manual Store |
|
|
Full Guide |
|
|
Mini Guide |
|
|
Default Guide |
: Full Guide |
|
Channel List |
|
|
●Air: “Air” antenna signal.
●Cable: “Cable” antenna signal.
●Auto: “Air” and “Cable” antenna signals.
N If the antenna is connected to ANT 1 IN (AIR), select “Air” and if it isconnected to ANT 2 IN (CABLE), select “Cable”. N If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are connected, select “Auto”.
Press the TOOLS button to display the Tools menu. You can also set the antanna by selecting Tools → Switch to Cable / Switch to Air.
Digital & Analogue / Digital / Analogue
●Digital & Analogue: Digital and Analogue channels.
●Digital: Digital channels.
●Analogue: Analogue channels.
NScans for all channels with active broadcast stations and stores them in the TV’s memory.
NIf you want to stop Auto Store, press the ENTEREbutton. The Stop Auto Store? message will be displayed.
Select Yes by pressing the ◄ or ► button, then press the ENTEREbutton.
Manual Store
NScans for a channel manually and stores it in the TV’s memory.
NIf a channel is locked using the Child Lock function, the PIN input window appears.
Digital Channel
Manual store for digital channels.
● Channel: Set the Channel number using the ▲, ▼ or number (0~9) buttons. ● Frequency: Set the frequency using the number buttons.
● Bandwidth: Set the bandwidth using the ▲, ▼ or number (0~9) buttons.
NWhen it has finished, channels are updated in the channel list.
Analogue Channel
Manual store for analogue channel.
● Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9) buttons.
●Colour System → Auto / PAL / SECAM / NTSC4.43 / NTSC3.58: Sets the colour system value using the ▲ or ▼ button.
●Sound System → BG / DK / I / M / L: Sets the sound system value using the ▲ or ▼ button.
●Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
N You can also select the channel number directly by pressing the number (0~9) buttons.
N If there is abnormal sound or no sound, reselect the sound standard required.
●Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen.
●Store (When you store the channel and associated programme number): Set to OK by pressing the ENTEREbutton.
N Channel mode
–P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.
–C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.
–S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
English -