Samsung HW-S40T, HW-S41T Instruction manual

FULL MANUAL
HW-S40T / S41T
Imagine the possibilities
Thank you fo r purchasing this Samsung product.
To receive more complete s ervice, please register
your product at www.samsung.com/register
SAFETY INFORMATION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Refer to the table below for an explanation of symbols which may be on your Samsung product.
CAUTION
RISK OF E LECTRIC S HOCK.
DO NOT OP EN.
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
This symbol indicates that this product has included important literature concerning operation and maintenance.
Class II product : This symbol indicates
that it does not require a safety
connection to electrical ear th (ground). If this symbol is not present on a product with a power cord, the produc t MUST have a reliable connection to protective ear th (ground).
AC voltage : This symbol indicates that
the rated voltage marked with the
symbol is AC voltage.
DC voltage : This symbol indicates that
the rated voltage marked with the
symbol is DC voltage.
Caution, Consult instructions for use :
This symbol instruct s the user to
consult the user manual for further
safety related information.
WARNING
• To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture.
CAUTION
• TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• This apparatus shall always be connected to a AC outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.
• Do not expose this apparatus to dripping or
splashing. Do not put objects lled with
liquids, such as vases on the apparatus.
• To turn this apparatus of f completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.
Wiring the Main Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same colour as the fuse
tted in the plug. Replacement covers are available from your dealer. If the tted plug is not
suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.
ENG - 2
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the
bared exible cord. Never attempt to insert bare
wires directly into a mains socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:– The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LET TER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.
PRECAUTIONS
1. Ensure that the AC power supply in your
house complies with the power requirements
listed on the identication sticker located on
the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7~10 cm). Make sure the ventilation slots are not covered. Do not place
the unit on ampliers or other equipment
which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.
2. During thunderstorms, disconnect the AC
plug from the wall outlet. Voltage peaks due to lightning could damage the unit.
3. Do not expose the unit to direct sunlight or
other heat sources. This could lead to overheating and cause the unit to malfunction.
4. Protect the product from moisture (i.e.
vases), and excess heat (e.g. a replace) or
equipment creating strong magnetic or
electric elds. Unplug the power cable from
the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using.
5. The battery used with this product contains
chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct
sunlight, or re. Do not short circuit,
disassemble, or overheat the battery. Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type.
ENG - 3
Fabric cleaning
Remove any dirt or stain on the product surface immediately.
Removing and cleaning can be less effective for some substances or if left for a prolonged time.
CAUTION
• Use a vacuum cleaner or an adhesive lint roller to remove dust, handprints, and the likes.
– Some cleaning brushes may damage the
product, depending on the materials they contain.
– Towels and cleaning clothes may leave
lint or dirt on the product.
• Do not use a nail or other tools to scratch the dirt off. It may damage the fabric.
• To remove oil or liquid stains, use a clean white cloth moist with water. If the stain persists, wipe it with a mixture of water and neutral detergent (such as dishwashing soaps) and a cloth.
– A non-neutral detergent or cleaner may
cause discolouration or fabric damage.
– After cleaning, use a dry cloth or
hairdryer to dry the area.
– Do not use excessive force to avoid
discolouration or fabric damage.
ENG - 4
CONTENTS
01 Checking the Components 7
Inserting Batteries before using the Remote Control (AA batteries X 2) ------------------------- 7
02 Product Overview 8
Top Panel of the Soundbar ------------------------- 8
Bottom Panel of the Soundbar ------------------------- 9
03 Using the Remote Control 10
How to Use the Remote Control
Adjusting the Soundbar volume with a TV remote control ------------------------- 13
-------------------------
04 Connecting the Soundbar 14
Connecting Electrical Power
-------------------------
05 Using a wired connection to the TV 15
Connecting using an Optical Cable
-------------------------
06 Using a wireless connection to the TV 16
Connecting via Bluetooth
-------------------------
07 Connecting an External Device 18
Connecting using an Optical Cable
-------------------------
10
14
15
16
18
ENG - 5
08 Connecting a Mobile Device 19
Connecting via Bluetooth
Using the Tap Sound
-------------------------
-------------------------
09 Installing on a wall 24
10 Installing the Soundbar in front of TV 24
11 Software Update 25
Initialization
-------------------------
12 Troubleshooting 27
13 Licence 28
14 Open Source Licence Notice 29
15 Important Notes About Service 29
16 SpecicationsandGuide 30
Specications
-------------------------
30
19
23
26
ENG - 6

01 CHECKING THE COMPONENTS

PAIR
SOUND MODE
VOL WOOFER
SOUNDBAR
Soundbar Main Unit Soundbar Remote Control / Bat teries
AC/DC A dapter (Soundb ar) Power Cord (Soundbar)
• For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit)
• To purchase additional components or optional cables, contact a Samsung Service Centre or Samsung Customer Care.
• There are two wall mount holes (M4 size) at the bottom of the Soundbar. Individually purchase a compatible bracket and mount the Soundbar on a wall to suit your preferences.
• Design, specications are subject to change without prior notice.
• The appearance of the accessories may differ slightly from the illustrations above.

Inserting Batteries before using the Remote Control (AA batteries X 2)

Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AA batteries (1.5V) oriented so that their polarity is correct. Slide the back cover back into position.
ENG - 7

02 PRODUCT OVERVIEW

Top Panel of the Soundbar

Position the product so that the SAMSUNG logo is located on the top.
󱂓
The LED Indicator ashes, glows, or changes colour depending on the Soundbar's current
mode or status. The colour of the LED indicator and the number of lights indicate the active mode as described below.
󱂓
LED
indicator
W
White LED
• The Multicolour LED changes to White, Cyan, Green, Red, Yellow, Orange, Purple and
Blue depending on the mode or status.
W
White LED
Multicolour LED
Top P ane l
M
󱂖󱂔 󱂕
W
White LED
W
White LED
Power Turns the power on and off.
󱂔
Volume Adjusts the volume.
󱂕
• Press the (Source) button to change the mode. Each time you change the mode,
the LED lights in white and then turns off.
Source
󱂖
• When you plug in the AC cord, the power button will begin working in 4 to 6 seconds.
• When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.
• If you hear sounds from both the TV and Soundbar, go to the Settings menu for the TV audio and change the TV speaker to External Speaker.
LED Indicator
White On -> O ff White On -> O ff
Digital Audio In Bluetooth
ENG - 8

Bottom Panel of the Soundbar

SERVICE
(OPTICAL)
SERVICE
DC 24V
DIGITAL AUDIO IN
(OPTICAL)
SERVICE
DIGITAL AUDIO IN
(OPTICAL)
SERVICE
DIGITAL AUDIO IN
(OPTICAL)
󱂓 󱂔 󱂕
DIGITAL AUDIO IN
(OPTICAL)
DC 24V
DIGITAL AUDIO IN
(OPTICAL)
SERVICE
DC 24V
DC 24V (P ower Supply In)
󱂓
Connect the AC/DC power adapter.
DIGITAL AUD IO IN (OPTIC AL)
󱂔
Connect to the digital (optical) output of an ex ternal device.
SERVICE
󱂕
Connect a USB storage device to upgrade the product's sof tware.
• When disconnecting the power cable of the AC/DC power adaptor from a wall outlet, pull the plug. Do not pull the cable.
• Do not connect this unit or other components to an AC outlet until all connections between components are complete.
SERVICE
ENG - 9

03 USING THE REMOTE CONTROL

How to Use the Remote Control

Power
󱂓
Turns the Soundbar on and off.
󱂓
󱂔
󱂕
󱂖
PAIR
SOUND
MODE
VOL WOOFER
SOUNDBAR
󱂗
󱂘
󱂙
󱂚
󱂛
󱂜
LED
Indicator
Auto Power Down Function
The unit turns off automatically in the following situations:
– In “Digital Audio In” / “Bluetooth” mode if there is no
audio signal for 20 minutes.
󱂔
󱂕
(Source)
Press to select a source connected to the Soundbar.
(Mute)
Press the (Mute) button to mute the sound. Press it again to unmute the sound.
LED
Indicator
Cyan Blink s X1
On
Blinks X R epeatly
Red Blink s X3
Off
ENG - 10
Loading...
+ 23 hidden pages