Samsung HW-NW700 User Manual

FULL MANUAL

HW-NW700

Imagine the possibilities

Thank you fo r purchasing this Samsung product.

To receive more complete s ervice, please register

your product at www.samsung.com/register

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF E LECTRIC S HOCK.

DO NOT OP EN.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol indicates that this product has included important literature concerning operation and maintenance.

Class II product : This symbol indicates

that it does not require a safety

connection to electrical ear th (ground).

AC voltage : This symbol indicates that

the rated voltage marked with the

symbol is AC voltage.

WARNING

• To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture.

CAUTION

• TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• This apparatus shall always be connected to a AC outlet with a protective grounding connection.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

• Do not expose this apparatus to dripping or

splashing. Do not put objects lled with

liquids, such as vases on the apparatus.

• To turn this apparatus of f completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.

DC voltage : This symbol indicates that

the rated voltage marked with the

symbol is DC voltage.

Caution, Consult instructions for use :

This symbol instructs the user to

consult the user manual for further

safety related information.

ENG - 2

PRECAUTIONS

1. Ensure that the AC power supply in your

house complies with the power

requirements listed on the identication

sticker located on the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7~10 cm). Make sure the ventilation slots are not

covered. Do not place the unit on ampliers

or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.

2. During thunderstorms, disconnect the AC

plug from the wall outlet. Voltage peaks due to lightning could damage the unit.

3. Do not expose the unit to direct sunlight or

other heat sources. This could lead to overheating and cause the unit to malfunction.

4. Protect the product from moisture (i.e.

vases), and excess heat (e.g. a replace) or

equipment creating strong magnetic or

electric elds. Unplug the power cable from

the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using.

5. The battery used with this product contains

chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct

sunlight, or re. Do not short circuit,

disassemble, or overheat the battery. Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type.

ABOUT THIS MANUAL

The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download.

USER MANUAL

See this manual for safety instructions, product installation, components,

connections, and product specications.

FULL MANUAL

You can access the FULL MANUAL on Samsung’s on-line customer support centre by scanning the QR code. To see the manual on your PC or mobile device, download the manual in document format from Samsung’s website. (http://www.samsung.com/support)

Design, specications, and App screen are subject to

change without prior notice.

ENG - 3

CONTENTS

01 Checking the Components 6

Inserting Batteries before using the Remote Control (AA batteries X 2) ------------------------- 6

02 Product Overview 7

Front Panel / Bottom Panel of the Soundbar ------------------------- 7

Rear Panel of the Soundbar ------------------------- 8

03 Connecting the Soundbar 9

Connecting Electrical Power

-------------------------

04 Connecting to a TV 10

Connecting using an Optical Cable

Connecting Wirelessly

– Connecting a TV via Bluetooth – Connecting via Wi-Fi

-------------------------

05 Connecting an External Device 15

Connecting using an Optical Cable

-------------------------

06 Connecting a Mobile Device 16

Connecting via Bluetooth

Connecting via Wi-Fi (Wireless Network)

-------------------------

07 Connecting the Soundbar to an SWA-9000S

(Sold separately) 21

08 Connecting the Soundbar to an SWA-W700

(Sold separately) 24

ENG - 4

09 Connecting an Amazon product 27

Connect and use with an Amazon product (Amazon Echo) ------------------------- 27

Use voice commands to control the Soundbar

-------------------------

10 Using the Remote Control 30

How to Use the Remote Control

Adjusting the Soundbar volume with a TV remote control

Using the Hidden Buttons (Buttons with more than one function)

Output specications for the different sound effect modes

-------------------------

11 Installing the Wall Mount 35

Installation Precautions

Wallmount Components

-------------------------

12 Software Update 39

13 Troubleshooting 40

14 Licence 41

15 Open Source Licence Notice 41

16 Important Notes About Service 41

17 SpecicationsandGuide 42

Specications

-------------------------

ENG - 5

01 CHECKING THE COMPONENTS

PAIR

SOUND MODE

VOL BASS

SOUNDBAR

Soundbar Main Unit Remote Control /

Batteries

AC/DC Adapter Power Cord

x 3 x 3

(M5 x L50)

Wall Mount Guide Bracket-Wall Mount Anchor / Screw

(Optionally)

x 2

Holder-Cable Cushion P ad Holder-Dongle Screw

x 2

x 1

(M3 x L10)

• For more information about the power supply and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit)

• For Soundbar wall mounting components, see page 35.

• To purchase additional components or optional cables, contact a Samsung Service Centre or Samsung Customer Care.

• This Soundbar is for wall mounting only.

• Use the Holder-Dongle Screw to secure the Holder-Dongle when connecting the Soundbar to the Wireless Rear Speaker Kit (SWA-9000S) or Wireless Subwoofer (SWA-W700) (Sold separately).

• The appearance of the accessories may differ slightly from the illustrations above.

Inserting Batteries before using the Remote Control (AA batteries X 2)

Slide the battery cover in the direction of the arrow until it is completely removed. Insert 2 AA batteries (1.5V) oriented so that their polarity is correct. Slide the battery cover back into position.

ENG - 6

02 PRODUCT OVERVIEW

Front Panel / Bottom Panel of the Soundbar

Position the product so that the SAMSUNG logo is located on the top.

󱂓

Bottom Panel

󱂔 󱂕 󱂖

Display

󱂓

Displays the product’s status and current mode.

󱂔

󱂕

󱂖

• When you plug in the AC cord, the power button will begin working in 4 to 6 seconds.

• When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.

• If you want to enjoy sound only from the Soundbar, you must turn off the TV’s speakers in the Audio Setup menu of your TV. Refer to the owner ’s manual supplied with your TV.

(Power) Button

Turns the power on and off.

(Vol ume) But ton

Adjusts the volume.

• When adjusted, the volume level appears on the Soundbar ’s front display.

(Source) Bu tton

Selects the source input mode.

Input mode Display

Optical Digital input D.IN

Wi-Fi mode WIFI

BLUETOOTH mode BT

• To turn on “BT PAIRING” mode, change the source to “ BT” mode, and then press and hold the

button on the bottom panel for more than 5 seconds.

ENG - 7

Rear Panel of the Soundbar

DIGITAL AUDIO IN

󱂓

󱂔

󱂕

DIGITAL AUD IO IN (OPTIC AL)

󱂓

Connect to the digital (optical) output of an ex ternal device.

(OPTICAL)

WIRELESS

DC 23V

󱂖 󱂗

NETWORK

(WOOFER/REAR)

ID SET

NETWORK

(WOOFER/REAR)

DIGITAL AUDIO IN (OPTICAL)

WIRELESS

DC 23V

ID SET

WIRELESS

Attach the wireless dongle that connects the Soundbar to surround speakers and a subwoofer wirelessly. (The surround speaker, subwoofer, and wireless dongle are sold separately.)

󱂔

• The WIRELESS jack is not USB-compatible.

• The availability of subwoofers dif fers by area. Check the availability at http://www.samsung.com/support.

DC 23V (P ower Supply In)

󱂕

Connect the AC/DC power adapter.

NETWORK

󱂖

Press to connect to a wireless network (Wi-Fi) via the SmartThings app.

ID SET (WOOFER/REAR)

Press to connect the Soundbar to surround speakers and a subwoofer wirelessly.

󱂗

• Press and hold the Up button on the remote for 5 seconds to complete ID SET.

• When disconnecting the power cable of the AC/DC power adaptor from a wall outlet, pull the plug. Do not pull the cable.

• Do not connect this unit or other components to an AC outlet until all connections between components are complete.

ENG - 8

03 CONNECTING THE SOUNDBAR

NETWORK

Connecting Electrical Power

Use the power components (1, 2) in the following order to connect the Soundbar to an electrical outlet:

Connect the power output cable to the power adapter, and then to the Soundbar.

Connect the power cord to a wall socket.

See the illustrations below.

• For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit)

• Make sure to rest the AC/DC

Adapter at on a table or the oor.

If you place the AC/DC Adapter so

Power Cord

Connecting Electric al Power

AC/DC Adapter

DC 23V

DIGITAL AUDIO IN (OPTICAL)

WIRELESS

DC 23V

Rear of th e Soundbar

Main Unit

that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.

ENG - 9

04 CONNECTING TO A TV

Hear TV sound from your Soundbar through wired or wireless connections.

• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control.

– This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when

you connect the Soundbar to the TV using an optical cable.

– This function also allows you to use the TV menu to adjust the sound eld and various settings

as well as the volume and mute.

Connecting using an Optical Cable

When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format ” on your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may use different words for Dolby Digital and PCM depending on the TV manufacturer.)

Rear of th e Soundbar

DIGITAL AUDIO IN

󱂓

(OPTICAL)

OPTICAL OUT

Optic al Cable

(not supplied)

WIRELESS

D.IN

󱂔

Bott om of the Soundba r

1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV

with a digital optical cable (not supplied).

2. Press the button on the bottom panel or on the remote control, and then select the “D.IN”

mode.

ENG - 10

Auto Power Link

Auto Power Link automatically turns on the Soundbar when the TV is turned on.

1. Connect the Soundbar and a TV with a digital optical cable (not supplied).

2. Press the Left button on the remote control (the blue spot in the illustration

to the right) for 5 seconds to turn Auto Power Link on or off.

• Auto Power Link is set to ON by default.

(To turn off this function, press the Left button on the remote for 5 seconds.)

• Depending on the connected device, Auto Power Link may not function.

• This function is only available in the “D.IN” mode.

Connecting Wirelessly

Connecting a TV via Bluetooth

When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.

• Only one TV can be connected at a time.

PAIR

Bott om of the Soundba r

The initial connection

1. Press the

(OR)

a. Press the button on the bottom panel and then select “BT”.

b. When “BT READY” appears, press and hold the button on the bottom panel of the

2. Select Bluetooth mode on the TV. (For more information, see the TV’s manual.)

3. Select “[AV] Samsung Soundbar NWxxx” from the list on the TV’s screen.

An available Soundbar is indicated with “Need Pairing” or “Paired” in the TV Bluetooth device list. To connect the TV to the Soundbar, select the message, and then establish a connection.

• When the TV is connected, [TV Name] → “BT” appears on the Soundbar’s front display.

4. You can now hear TV sound from the Soundbar.

button on the remote control to enter the “BT PAIRING” mode.

PAIR

“BT” changes to “BT READY” in a few seconds automatically if there is no Bluetooth device connected to the Soundbar.

Soundbar for more than 5 seconds to display “BT PAIRING”.

ENG - 11

If the device fails to connect

• If a previously connected Soundbar listing (e.g. “[ AV] Samsung Soundbar NWxxx”) appears in the list, delete it.

• Then repeat steps 1 through 3.

NOTE

– After you have connected the Soundbar to your TV the rst time, use the “BT READY” mode to

reconnect.

Disconnecting the Soundbar from the TV

Press the button on the bottom panel or on the remote control and switch to any mode but “BT”.

• Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.)

• To cancel the automatic Bluetooth connection between the Soundbar and TV, press the

button

on the remote control for 5 seconds with the Soundbar in “BT READY” status. (Toggle On → Off)

What is the difference between BT READY and BT PAIRING?

• BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar.

• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the the remote control or press and hold the button on the bottom of the Soundbar for more than 5 seconds while the Soundbar is in

“BT”

mode.)

NOTES

– If asked for a PIN code when connecting a Bluetooth device, enter <0000>. – In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the

Soundbar and the Bluetooth device exceeds 10 meters.

– The Soundbar automatically turns off after 5 minutes in the Ready state. – The Soundbar may not perform Bluetooth search or connection correctly under the following

circumstances:

– If there is a strong electrical eld around the Soundbar. – If several Bluetooth devices are simultaneously paired with the Soundbar. – If the Bluetooth device is turned off, not in place, or malfunctions.

– Electronic devices may cause radio interference. Devices that generate electromagnetic waves

must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

PAIR

button on

ENG - 12

Connecting via Wi-Fi

Pre-connection Checklist

1. Conrm that your Samsung Smar t TV was released after 2014. This function is compatible only

with Samsung Smart TVs released after 2014.

2. Make sure your Wireless router (Wi-Fi) is ready and working.

3. Make sure that the TV is connected to the Wireless router (your Wi-Fi network).

Bott om of the Soundba r

Step 1 : Connecting the Soundbar to Wi-Fi

1. Press the button on the bottom of the Soundbar or on the remote control to select “ WIFI”

mode.

• When using selected Samsung TVs (2016 ~ 2018 Samsung Smar t TVs that support Bluetooth.)

– If you select “WIFI” mode when the TV is turned on, the TV screen displays a pop-up

window providing instructions on how to automatically connect the Soundbar to a wireless router (Wi-Fi). Refer to instructions in the pop-up window of the TV.

WIFI

Bott om of the Soundba r

2. Connect your mobile device (smartphone, tablet, etc.) to the Wi-Fi network the TV is connected to.

ENG - 13

+ 30 hidden pages