Samsung HW-N450 User Manual

FULL MANUAL

HW-N450

Imagine the possibilities

Thank you fo r purchasing this Samsung product.

To receive more complete s ervice, please register

your product at www.samsung.com/register

SAFETY INFORMATION

• The following also applies to the Wireless Subwoofer (PS-WN20).

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF E LECTRIC S HOCK.

DO NOT OP EN.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol indicates that this product comes with impor tant literature concerning operation and maintenance.

Class II product : This symbol indicates that a safety connection to elec trical earth (ground) is not required.

AC voltage : Rated voltage marked with this symbol is AC voltage.

DC voltage : Rated voltage marked with this symbol is DC voltage.

Caution. Consult Instructions for use : This symbol instructs the user to consult the user manual for further safety related information.

WARNING

• To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture.

• To prevent injury, this apparatus must be

securely attached to the oor/wall in

accordance with the installation instructions.

• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put objects lled with

liquids, such as vases, on the apparatus.

• To turn this apparatus of f completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.

FCC NOTE (for U.S.A):

Class B FCC Statement

The included module(s) has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

ENG - ii

• Reorienting or relocating the receiving antenna.

• Increasing the separation between the equipment and receiver.

• Connecting the equipment to an outlet that is on a different circuit than the radio or TV.

• Consulting the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement :

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

FCC Caution :

• Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• This product satises FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

1. Read these instructions.

2. Keep these Instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including ampliers) that produce

heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug

does not t into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked

on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specied

by the manufacturer.

ENG - iii

12. Use only with the cart, stand,

tripod, bracket, or table

specied by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning

storms or when unused for long periods of time.

14. Refer all servicing to qualied service

personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

PRECAUTIONS

1. Ensure that the AC power supply in your

house complies with the power

requirements listed on the identication

sticker located on the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not

covered. Do not place the unit on ampliers

or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.

2. During thunderstorms, disconnect the AC

plug from the wall outlet. Voltage peaks due to lightning could damage the unit.

3. Do not expose the unit to direct sunlight or

other heat sources. This could lead to overheating and cause the unit to malfunction.

4. Protect the product from moisture (i.e.

vases), and excess heat (e.g. a replace) or

equipment creating strong magnetic or

electric elds. Unplug the power cable from

the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using.

5. The battery used with this product contains

chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct

sunlight, or re. Do not short circuit,

disassemble, or overheat the battery. Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type.

ENG - iv

ABOUT THIS MANUAL

The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download.

USER MANUAL

See this manual for safety instructions, product installation,

components, connections, and product specications.

FULL MANUAL

You can access the Full Manual on Samsung’s on-line customer support center by scanning the QR code. To see the manual on your PC or mobile device, download the manual in document format from Samsung’s website. (http://www.samsung.com/support)

Design and specications are subject to change without prior notice.

ENG - v

CONTENTS

01 Checking the Components 2

Inserting Batteries before using the Remote Control (AA batteries X 2) ------------------------- 2

02 Product Overview 3

Front Panel / Right Side Panel of the Soundbar

Bottom Panel of the Soundbar ------------------------- 4

-------------------------

03 Connecting the Soundbar 5

Connecting Electrical Power

Connecting the Soundbar to the Subwoofer

– Automatic connection between the Subwoofer and the Soundbar – Manually connecting the Subwoofer if automatic connection fails

Connecting the SWA-8500S to a Soundbar (Sold Separately)

-------------------------

04 Connecting to your TV 10

Method 1. Connecting with a Cable

– Connecting using an Optical Cable – Connecting a TV using an HDMI Cable

Method 2. Connecting Wirelessly

– Connecting a TV via Bluetooth

-------------------------

05 Connecting an External Device 14

Connecting using an Optical or Analog Audio (AUX) Cable

Connecting using an HDMI Cable

-------------------------

6 7

06 Connecting a USB Storage Device 16

ENG - vi

07 Connecting a Mobile Device 18

Connecting via Bluetooth

Using the Samsung Audio Remote App

– Installing the Samsung Audio Remote App – Launching the Samsung Audio Remote App

-------------------------

08 Using the Remote Control 22

How to Use the Remote Control

Adjusting the Soundbar volume with a TV remote control

Using the Hidden Buttons (Buttons with more than one function)

Output specications for the different sound effect modes

-------------------------

09 Installing the Wall Mount 27

Installation Precautions

Wallmount Components

-------------------------

10 Software Update 29

Updating Procedure

If UPDATE is not displayed

-------------------------

21 21

11 Troubleshooting 31

12 License 32

13 Open Source License Notice 32

14 Important Notes About Service 32

15 SpecicationsandGuide 33

Specications

-------------------------

ENG - vii

01 CHECKING THE COMPONENTS

Soundbar Main Unit Subwoofer Remote Control

(AH59 -02767A) / Batte ries

1 2 3

PAIR

SOUND MODE

VOL WOOFER

SOUNDBAR

Power Cord

(Subwoofer)

(3903- 001117 or

3903-000853)

AC/DC Adapter

(Main Unit)

(BN44-00862A)

Power Cord

(AC/DC Adapter)

(3903- 001117 or

3903-000853)

Optic al Cable

(AH39-00779A)

• For more information about the power supply and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit)

• The power components are labelled (1, 2, 3). For more information about power connections, see page 5.

• For Soundbar wall mounting components, see page 27.

• To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care.

• The appearance of the accessories may differ slightly from the illustrations above.

Inserting Batteries before using the Remote Control (AA batteries X 2)

Slide the battery cover in the direction of the arrow until it is completely removed. Insert 2 AA batteries

(1.5V) oriented so that their polarity is correct. Slide the battery cover back into position.

ENG - 2

02 PRODUCT OVERVIEW

Front Panel / Right Side Panel of the Soundbar

Position the product so that the SAMSUNG logo is located on the top.

Display

󱂓

Displays the product’s status and current mode.

+/- (Volume) But ton

Adjusts the volume.

󱂔

• When adjusted, the volume level appears on the Soundbar ’s front display.

(Source) But ton

Selects the source input mode.

Input mode Display

Optical Digital input D.IN

ARC (HDMI OUT) input D.IN  TV ARC (Auto conversion)

󱂕

• To turn on “BT PAIRING” mode, change the source to “BT” mode, and then press and hold the

AUX input AUX

HDMI input HDMI

BLUETOOTH mode BT

USB mode USB

(Source) button for more than 5 seconds.

󱂔 󱂕 󱂖

Right Sid e of the Soundbar

󱂓

󱂖

(Power) Button

Turns the power on and off.

•

When you plug in the AC cord, the power button will begin working in 4 to 6 seconds.

•

When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.

•

If you want to enjoy sound only from the Soundbar, you must turn off the TV’s speakers in the Audio Setup menu of your TV. Refer to the owner ’s manual supplied with your TV.

ENG - 3

Bottom Panel of the Soundbar

HDMI OUT

(TV-ARC)

HDMI IN

DIGITAL AUDIO IN

󱂓

󱂔

󱂕

(OPTICAL)

USB (5V 0.5A)

AUX IN

HDMI IN

HDMI OUT

(TV-ARC)

󱂖

󱂗

󱂘

DC 24V

DIGITAL AUDIO IN (OPTICAL)

USB (5V 0.5A)

AUX IN

DIGITAL AUD IO IN (OPTIC AL)

󱂓

Connect to the digital (optical) output of an ex ternal device.

USB (5V 0. 5A)

󱂔

Connect a USB device here to play music les on the USB device through the Soundbar.

AUX IN

󱂕

Connect to the Analog output of an ex ternal device.

DC 24V

HDMI IN

HDMI OUT (TV-ARC)

HDMI IN

Inputs digital video and audio signals simultaneously using an HDMI cable.

󱂖

Connect to the HDMI output of an external device.

HDMI OUT (TV-ARC)

󱂗

Connect to the HDMI (ARC) jack on a TV.

DC 24V (P ower Supply In)

󱂘

Connect the AC/DC power adapter.

• When disconnecting the power cable of the AC/DC power adaptor from a wall outlet, pull the plug. Do not pull the cable.

• Do not connect this unit or other components to an AC outlet until all connections between components are complete.

ENG - 4

03 CONNECTING THE SOUNDBAR

Connecting Electrical Power

Use the power components (1, 2 the following order:

, 3

) to connect the Subwoofer and Soundbar to an electrical outlet in

1 Connect the power cord to the Subwoofer.

2 Connect the power output cable to the power adapter, and then to the Soundbar.

Connect the power cord to a wall socket.

See the illustrations below.

• For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit)

POWER

Rear of Subwoofer

1 Power Cord

Connecting

Electric al Power

DC 24V

DIGITAL AUDIO IN

HDMI IN

(OPTICAL)

USB (5V 0.5A)

HDMI OUT (TV-ARC)

AUX IN

Bott om of the

Soundbar Main Unit

DC 24V

3 Power Cord

Connecting

Electrical

Power

2 AC/DC Adapter

• Make sure to rest the AC/DC Adapter at on a table or the oor. If you place the AC/DC Adapter so that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.

ENG - 5

Connecting the Soundbar to the Subwoofer

When the subwoofer is connected, you can enjoy rich bass sound.

Automatic connection between the Subwoofer and the Soundbar

When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar.

• When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.

LED Indicator Lights on the Rear of Subwoofer

LED Status Description Resolution

Successfully connected (normal operation)

Standby (with the Soundbar main unit turned off)

Connection failed

Check if the power cable attached to the main Soundbar unit is connected properly or wait about 5 minutes. If blinking persists, try manually connecting the subwoofer. See page 7.

Check if the power cable attached to the main Soundbar unit is connected properly.

Connect again. See the instructions for manual connection on page 7.

See the contact information for the Samsung Service Center in this manual.

Blue

Red On

Red and

blue

Blinking Recovering the connection

Blinking Malfunction

ENG - 6

Manually connecting the Subwoofer if automatic connection fails

Before per forming the manual connection procedure below:

• Check whether the power cables for the Soundbar and subwoofer are connected properly.

• Make sure that the Soundbar is turned on.

1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds.

• The red indicator on the rear of the subwoofer turns off and the blue indicator blinks.

5 Sec

Rear of Subwoofer

2. Press and hold the Up button on the remote control for at least 5 seconds.

• The ID SET message appears on the display of the Soundbar for a moment, and then it disappears.

• The Soundbar will automatically power on when ID SET is complete.

PAIR

5 Sec

3. Check if the LINK LED is solid blue (connection complete).

The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Wireless Subwoofer.

Blue is On

ENG - 7

ID SET

+ 28 hidden pages