Samsung HW-M450 User Manual

USER MANUAL
HW-M450
SAFETY INFORMATION
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF E LECTRIC S HOCK.
DO NOT OP EN.
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this produc t.
This symbol indicates that impor tant literature concerning operation and maintenance has been included with this product.
Class II product : This symbol indicates
that it does not require a safety
connection to elec trical earth (ground).
AC voltage : This symbol indicates that
the rated voltage marked with the
symbol is AC voltage.
WARNING
• To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture.
CAUTION
• TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• This apparatus shall always be connected to a AC outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.
• Do not expose this apparatus to dripping or
splashing. Do not put objects lled with
liquids, such as vases on the apparatus.
• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.
DC voltage : This symbol indicates that
the rated voltage marked with the
symbol is DC voltage.
Caution, Consult instructions for use :
This symbol instructs the user to consult
the user manual for further safet y
related information.
ENG - ii ENG - iii
PRECAUTIONS
1. Ensure that the AC power supply in your
house complies with the power
requirements listed on the identication
sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7~10 cm). Make sure the ventilation slots are not covered. Do not
place the unit on ampliers or other
equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.
2. During thunderstorms, disconnect the AC
plug from the wall outlet. Voltage peaks due to lightning could damage the unit.
3. Do not expose the unit to direct sunlight or
other heat sources. This could lead to overheating and cause the unit to malfunction.
4. Protect the product from moisture (i.e.
vases), and excess heat (e.g. a replace) or
equipment creating strong magnetic or
electric elds. Unplug the power cable from
the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using.
5. The battery used with this product contains
chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct
sunlight, or re. Do not short circuit,
disassemble, or overheat the battery. Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type.
ABOUT THIS MANUAL
The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download.
USER MANUAL
See this manual for safety instructions, product installation, components,
connections, and product specications.
FULL MANUAL
You can access the customer support centre by scanning the QR code. To see the manual on your PC or mobile device, download the manual in document format from the website. (http://www.samsung.com/support)
Design and specications are subject to change
without prior notice.
CONTENTS
01 Checking the Components 2
Inserting Batteries before using the Remote Control (AA batteries X 2) ------------------------- 2
02 Product Overview 3
Front Panel / Right Side Panel of the Soundbar ------------------------- 3
Bottom Panel of the Soundbar ------------------------- 3
03 Connecting the Soundbar 4
Connecting Electrical Power
Connecting the Soundbar to the Subwoofer
– Automatic connection between the subwoofer and the Soundbar – Manually connecting the subwoofer if automatic connection fails
-------------------------
-------------------------
-------------------------
-------------------------
04 Connecting to your TV 7
Method 1. Connecting with a Cable
– Connecting using an Optical Cable – Connecting a TV using an HDMI Cable
Method 2. Connecting Wirelessly
– Connecting a TV via Bluetooth
-------------------------
-------------------------
-------------------------
-------------------------
-------------------------
05 Connecting an External Device 11
Connecting using an Optical or Analogue Audio (AUX) Cable
Connecting using an HDMI Cable
-------------------------
-------------------------
06 Connecting a USB 13
Software Update
-------------------------
4
5
5 6
7
7
8
9
9
11
12
13
ENG - iv ENG - v
07 Connecting a Mobile Device 14
Connecting via Bluetooth
-------------------------
08 Using the Remote Control 15
How to Use the Remote Control
Adjusting the Soundbar volume with a TV remote control ------------------------- 17
-------------------------
09 Installing the Wall Mount 18
Installation Precautions
Wallmount Components
Detaching the Soundbar from the Wall
-------------------------
-------------------------
-------------------------
10 Troubleshooting 22
11 Licence 23
12 Open Source Licence Notice 23
13 Important Notes About Service 23
14 SpecicationsandGuide 24
14
15
18
18
21
Specications
-------------------------
24
01 CHECKING THE COMPONENTS
HDMI OUT
(TV-ARC)
DC 24V
DC 24V
USB (5V 0.5A)
AUX IN
HDMI IN
DIGITAL AUDIO IN (OPTICAL)
DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
AUX IN
HDMI OUT
(TV-ARC)
HDMI IN
DC 24V
Soundbar Main Unit Subwoofer Remote Control / Batteries
1 2 3
Bluetooth
Surround
POWER
SOUND MODE
VOL WOOFER
SOUNDBAR
Power Cord
(Subwoofer)
AC/DC Adapter
(Main Unit)
Power Cord
(AC/DC Adapter)
Optic al Cable
• The power connection steps are labelled (1, 2, 3). For more information about power
connections, see page 4.
• For Soundbar wall mounting components, see page 18.
• Micro USB to USB adapter and HDMI cables are sold separately. To purchase, contact a Samsung Service Centre or Samsung Customer Care.
Inserting Batteries before using the Remote Control (AA batteries X 2)
Slide the battery cover in the direction of the arrow until it is completely removed. Insert 2 AA batteries (1.5V) oriented so that their polarity is correct. Slide the battery cover back into position.
ENG - 2 ENG - 3
02
PRODUCT OVERVIEW
Front Panel / Right Side Panel of the Soundbar
Right Sid e of the Soundbar
Position the product so that the SAMSUNG logo
Volume
is located on the top.
Display
Bottom Panel of the Soundbar
DIGITAL AUDIO IN
󱂔
󱂕
(OPTICAL)
HDMI IN
USB (5V 0.5A)
󱂓
Power
󱂗
󱂖
Source
󱂓
󱂔
󱂕
󱂖
󱂗
󱂘
󱂙
D.IN Connect to the digital (optical) output of an external device.
USB Connect a USB device here to play music les on the USB device through the Soundbar.
AUX Connect to the Analogue output of an external device.
HDMI IN
HDMI OUT Connect to the HDMI (ARC) jack on a TV.
DC 24V Connect the AC/DC power adapter. (Power Supply In)
AUX IN
DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
AUX IN
Selects the source input mode. (D.IN / AUX / HDMI / BT / USB)
• To turn on “BT PAIRING” mode, change the source to “BT” mode, and then press and
hold the (Source) button for more than 5 seconds.
Inputs digital video and audio signals simultaneously using an HDMI cable.
Connect to the HDMI output of an external device.
HDMI OUT
(TV-ARC)
HDMI IN
HDMI OUT
(TV-ARC)
󱂘
DC 24V
DC 24V
DC 24V
󱂙
03 CONNECTING THE SOUNDBAR
Connecting Electrical Power
Use the power components (1, 2, 3) to connect the units to electrical outlets in the following order:
1.) Subwoofer 2.) Soundbar Main Unit. See the illustrations below.
• For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit)
1 Power Cord
3 Power Cord
POWER
DC 24V
Connecting
Electric al Power
2 AC/DC Adapter
Rear of Subwoofer
Connecting
Electric al Power
HDMI IN
HDMI OUT (TV-ARC)
DC 24V
DC 24V
Bott om of the
Soundbar Main Unit
• Make sure to rest the AC/DC Adapter at on a table or the oor. If you place the AC/DC Adapter so that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.
ENG - 4 ENG - 5
Connecting the Soundbar to the Subwoofer
When the subwoofer is connected, you can enjoy rich bass sound.
Automatic connection between the subwoofer and the Soundbar
When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar.
• When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.
LED Indicator Lights on the Rear of Subwoofer
LED Status Description Resolution
Blue
Red On
Red and
blue
On
Blinking Recovering the connection
Blinking Malfunction
Successfully connected (normal operation)
Standby (with the Soundbar main unit turned off)
Connection failed
-
Check if the power cable to the main Soundbar unit is connected properly or wait for a while. (If blinking persists, try manually connecting the subwoofer. See page 6.)
Check if the power cable to the main Soundbar unit is connected properly.
Connect again. See the instructions for manual connection on page 6.
See the contact information for the Samsung Service Centre in the manual.
Loading...
+ 20 hidden pages