Samsung HT-X810 User Manual

quick start guide
2 remote control functions
3 connecting the wireless subwoofer
1 disc playback
2.1CH Digital
2 remote control functions 3 connecting the wireless subwoofer
Home Theater System
4 connecting the video out to your tv 5 connecting audio from external components 6 listening to radio
1 disc playback
Press the EJECT ( ) button to open the Disc Slot cover.
1.
Load a disc vertically into the Disc Insert Hole.
2.
Place a disc gently into the tray with the disc’s label
facing up.
Close the compartment by pressing the PLAY ( ) button.
3.
Playback starts automatically.
Thank you for purchasing this Samsung 2.1CH Digital Home Theater System. We have manufactured this product to provide you with many hours of Audio/Video Entertainment. This “QUICK START GUIDE” guide has been included to get you up and running in the least amount of time as possible.
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Samsung Electronics America, Inc.
1-800-SAMSUNG (7267864)
www.samsung.com/us
HT-X810
10
11
12
13
14
15 16
DVD RECEIVER button
1
1 2
3
4
5 6
7
8
9
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
You can operate your DVD receiver with the remote control.
TV button
2
You can operate your Samsung TV with the remote control.
POWER button
3
Press to turn the Home Theater or your Samsung TV On/Off.
4
Number (0~9) buttons
REMAIN button
5
You can check the elapsed or remaining time on a disc.
STEP button
The picture moves forward one frame
6
each time the button is pressed during playback.
Tuning Preset/CD Skip buttons
7
Tune in radio broadcasting, skip the song/scene.
VOLUME button
8
Press + to raise the volume and – to lower it.
MENU button
9
Press to see the menu.
AUDIO button
10
Selects the Disc’s Audio language.
TUNER MEMORY, SD/HD button
Press to memorize radio frequencies.
11
Press to select SD or HD(Standard or High Defi nition ) mode.
LOGO button
12
You can make your own TV wallpaper (screen saver).
V-SOUND(Virtual Sound) button
13
Makes virtual surround sound with just
2.1 channels.
P.BASS/AUDIO UPSCALING button
14
• Provides more powerful bass
• Makes your MP3s sound better
SLEEP button
15
Press to set the sleep off time.
SLOW button
Selects three different slow motion playback speeds.
16
MO/ST button
You can listen to radio broadcasts in MONO or STEREO.
DVD button
Press to select the DVD mode.
TUNER button
17
Press to listen to radio broadcasting.
AUX button
Press to select external audio input.
PORT button
18
USB port selection
TV/VIDEO button
19
Press TV/VIDEO button to select the Video input on your TV.
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
EJECT button
Press to move the cover so the Disc Slot is exposed.
CANCEL button
Used to cancel a wrong entry.
PAUSE button
Press to pause.
PLAY button
Press to play.
STOP button
Press to stop.
SEARCH buttons
Fast backward or forward
through a song/scene.
TUNING/CH button
Press to select the channel or to tune in radio broadcasting.
MUTE button
Press to mute the sound.
RETURN button
Press to return to the previous menu.
Cursor/ENTER button Used to select or move up/down, left/ right when setting the menu function.
SUBTITLE button
Selects the disc subtitle language.
EXIT button Press to exit the setup screen.
INFO button
View or change disc playback information on screen.
REPEAT button
Repeat playback of a chapter, title, group or track.
SOUND EDIT button
Adjust the speaker sound settings and level.
ZOOM button
Enlarges the picture during disc playback.
DIMMER button
The front display brightness will be adjusted.
S.VOL(Smart Volume) button
Makes the sound more stable during scene transitions.
Press the POWER button on the rear of the subwoofer to turn it on.
If the main unit is turned on
The subwoofer will be automatically connected to the product and the Link LED on its front will blink blue for a few seconds.
If the main unit is turned off
The Link LED on the front of the subwoofer will blink blue for about 30 seconds, then will change to red as the subwoofer switches to STANDBY mode.
ID SET button POWER button
M
Place the wireless subwoofer under the main unit.
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other
device that uses the same frequency (5.8GHz) near the system, some sound interruption may be heard due to interference.
The transmission distance of radio wave is about 32 feet, 9.7 inches, but may vary depending on
your operating environment. If a steel-concrete wall or metallic wall is between the main unit and the wireless subwoofer, the system may not operate at all, because the radio wave cannot penetrate metal.
If the main unit doesn't make wireless connection, the system needs ID Setting between the main
unit and wireless subwoofer. With the main unit turned off, press the remote control's "0""1""3""5" number buttons and the unit will turn on. With the wireless subwoofer turned on, press ID SET button on the back of the unit for 5 seconds.
The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water and
moisture. For optimal listening performance, make sure that the area around the wireless subwoofer location is clear
of any obstructions.
1 - English
AH68-02062Y
2 - English
3 - English
4 connecting the video out to your tv
HDMI OUT
HDMI OUT
HDMI OUT
HDMI OUT
HDMI OUT
Choose one of the three methods for connecting to a TV.
5
connecting audio from external components
6 listening to radio
METHOD2METHOD1
METHOD 1 : HDMI
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (Pr, Pb and Y) jacks on the back of the DVD Player to the Component Video Input jacks on your TV.
(BEST QUALITY)
(BETTER QUALITY)
METHOD3 (supplied)
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player.
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external
1.
component/MP3 player.
Press the AUX button on the remote control to select AUX1 input.
2.
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD  D.IN  AUX 1 AUX 2 USB BT AUDIO  FM.
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out
1.
of the external analog component.
Be sure to match connector colors.
Press the AUX button on the remote control to
2.
select AUX 2 input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD  D.IN  AUX 1  AUX 2  USB BT AUDIO FM.
Audio Cable (not supplied)
Audio OUT
Audio Cable (not supplied) If the external analog component has only one Audio Out, connect either left or right.
Connecting the FM Antenna
Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
1.
Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or
2.
other rigid surface.
Listening to Radio
Remote Control
Press the TUNER button to select the FM band.
1.
Tune in to the desired station.
2.
Automatic Tuning 1 : When the #,$ button is pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the ,,. button to automatically search for active broadcasting stations.
Manual Tuning : Briefl y press the ,,. button to increase or decrease the frequency incrementally.
Main Unit
FM Antenna
(supplied)
METHOD 3 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on your TV.
M
This product operates in Interlace scan mode (480i) for component output.
If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home Theater
(GOOD QUALITY)
using the TV's remote control. This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).
Please check the logo (If your TV has an logo, then it supports the Anynet+ function.)
4 - English
You can connect the Video Output jack of your VCR to
M
the TV, and connect the Audio Output jacks of the VCR to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the Home Theater to the
1.
Digital Output of the external digital component.
Press the AUX button on the remote control to select DIGITAL IN.
2.
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD  D.IN  AUX 1  AUX 2  USB BT AUDIO FM.
5 - English
External Analog Component
External Digital Component
Optical Cable (not supplied)
Press the FUNCTION button to select the FM band.
1.
Select a broadcast station
2.
Automatic Tuning 1 : Press the STOP () button to select PRESET and then press the #,$ button to select the
preset station. Automatic Tuning 2 : Press the
automatically search the band.
Manual Tuning : Press the
lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.
Each time the button is pressed, the sound switches between STEREO and MONO.
In a poor reception area, select MONO for a clear, interference-free broadcast.
.
STOP ()
STOP ()
button to select MANUAL and then press and hold the
button to select MANUAL and then briefl y press the
#,$
button to tune in to a
#,$
6 - English
button to
Loading...