Samsung HT-H6500WM, HT-H6530WM User Manual

Download

Page 1

HT-H6500WM HT-H6530WM

5.1CH Blu-ray™

Home Entertainment System

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Page 2

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.

- Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

- Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

- Do not place vessels (vases etc.) containing water on this apparatus. A water spill can cause a fire or electric shock.

• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.

• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.

• Route power-supply cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at the plug end, at wall outlets, and the point where they exit from the apparatus.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

• To avoid electric shock, never touch the inside of this

• Make sure to plug the power cord in until it is firmly

• If this apparatus does not operate normally - in

• Maintenance of Cabinet.

• Be sure to pull the power plug out of the outlet if the

• Contact an authorized service center for information

• Use only a properly grounded plug and wall outlet.

• To turn this apparatus off completely, you must

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol indicates that important literature concerning operation and maintenance has been included with this product.

apparatus. Only a qualified technician should open this apparatus.

seated. When unplugging the power cord from a wall outlet, always pull on the power cord's plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands.

particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center.

- Before connecting other components to this product, be sure to turn them off.

- If you move your product suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the product, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.

product is to remain unused or if you are leaving the house for an extended period of time (especially when children, elderly, or disabled people will be left alone in the house).

- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate.

if you intend to install your product in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failing to do so may lead to serious damage of your product.

- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be readily accessible at all times.

2 - English

Page 3

• Do not allow children to hang on the product.

• Store the accessories (battery, etc.) in a location safely

out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.

• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a service center.

• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance of the product or erase the printing on the product.

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.

• Do not dispose of batteries in a fire.

• Do not plug multiple electric devices into the same wall

socket. Overloading a socket can cause it to overheat, resulting in a fire.

• There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.

WARNING :

• TO PREVENT THE SPREAD OF FIRE,

KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer’s attention to Section 820~40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

CLASS 1 LASER PRODUCT

This product is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

DANGER :

• VISIBLE AND INVISIBLE LASER RADIATION WHEN

OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM (IEC 60825-1)

• THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN THE COVER. DO NOT REPAIR THE PRODUCT YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus (including AV receivers) that produce heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience receptacles, and the point where it exits the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

Safety Information

3 - English

Page 4

Safety Information

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

3D Precautions

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the 3D function.

• Some viewers may experience discomfort while viewing

3D TV such as dizziness, nausea, and headaches. If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest.

• Watching 3D images for an extended period of time

may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses, and rest.

• A responsible adult should frequently check on children

who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.

• Do not use the 3D Active Glasses for other purposes

(such as general eyeglasses, sunglasses, protective goggles, etc.)

• Do not use the 3D function or 3D Active Glasses while

walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury.

• If you want to enjoy 3D content, connect a 3D device

(3D compliant AV receiver or TV) to the product’s HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content.

• The product outputs 3D signals only through an HDMI

cable connected to the HDMI OUT port.

• The video resolution in 3D play mode is fixed to the resolution of the original 3D video. You can not change the resolution.

• Some functions such as BD Wise, screen size adjustment, and resolution adjustment may not operate properly in 3D play mode.

• You must use a high-speed HDMI cable for proper output of the 3D signal.

• Stay at least three times the width of the screen from the TV when watching 3D images. For example, if you have a 46 inch screen, stay 138 inches (11.5 feet) from the screen.

• Place the 3D video screen at eye level for the best 3D picture.

• When the product is connected to some 3D devices, the 3D effect may not function properly.

• This product does not convert 2D content into 3D.

• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of

the Blu-ray Disc Association.

4 - English

Page 5

Contents

GETTING STARTED

6 Accessories

6 Speaker Components

7 Front Panel

7 Rear Panel

8 Remote Control

CONNECTIONS

9 Connecting the Speakers

11 Attaching the Toroidal Ferrite Core to the Power

Cord of the Wireless Receiver Module (SWA-

6000)

12 Connecting to a TV and External Devices

13 Connecting to a Network Router

SETTINGS

14 The Initial Settings Procedure

14 The Home Screen at a Glance

15 Accessing the Settings Screen

15 Settings Menu Functions

20 Network Setup

23 Wi-Fi Direct

24 Upgrading Software

PLAYING CONTENT

26 Playing Commercial Discs

26 Playing Multimedia Files

28 Controlling Video Playback

31 Controlling Music Playback

36 Using Bluetooth

38 Playing Photo Contents

39 Listening to the Radio

40 Using the Special Effects Remote Control

Buttons

NETWORK SERVICES

41 Logging In to Your Samsung Account

41 Adding a Credit Card

41 Before Using MOVIES & TV SHOWS or

SAMSUNG APPS

42 Using MOVIES & TV SHOWS

43 Using SAMSUNG APPS

45 Screen Mirroring

45 Using the Web Browser

48 Linking your Internet Service Accounts to the

Product

48 BD-LIVE™

APPENDIX

49 Additional Information

50 Disk and Format Compatibility

57 Troubleshooting

60 Specifications

62 Licenses

Figures and illustrations in this User Manual

are provided for reference only and may differ from actual product appearance.

An administration fee may be charged if either

a. an engineer is called out at your request

and there is no defect in the product (i.e. where you have failed to read this user manual)

b. you bring the unit to a repair center and

there is no defect in the product (i.e. where you have failed to read this user manual).

 The amount of such administration charge will

be advised to you before any work or home visit is carried out.

Contents

5 - English

Page 6

Getting Started

Check the box for the accessories and speaker components listed or shown below.

Accessories

• Remote Control • Lithium Battery • User Manual

(For Power cord)

Power Cable FM Antenna

WARNING, DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD, [The remote control supplied with] This product contains a coin/button cell battery.

If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Toroidal Ferrite Core

Soft Cloth

Speaker Components

HT-H6500WM

Center

Front x 2 Surround x 2

Speaker Cable

x 6 Subwoofer

Wireless Receiver

Module (SWA-6000)

HT-H6530WM

Speaker Cable

Front x 2 Stand x 2 Surround x 2 Subwoofer

Screw (5x20) x 8

x 4

Stand Base x 2 Center

Wireless Receiver

Module (SWA-6000)

6 - English

Page 7

Front Panel

5V 0.5A

HDMI OUT

LAN

POWER

AUX IN FM ANT

OPTICAL

DIGITAL AUDIO IN

HDMI IN

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

IMPEDANCE : 3

DISPLAY ICONS

FUNCTION STOP PLAY/PAUSE

OPEN/ CLOSE

VOLUME CONTROL

POWER

DISPLAY

DISC TRAY

When the product is on, do not let children touch the product's surface. It will be hot.

✎

To upgrade the product's software through the USB jack, you must use a USB flash drive.

✎

When the product displays a Blu-ray Disc menu, you cannot start the movie by pressing the /p button

✎

USBREMOTE CONTROL SENSOR

on the product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the

If you are using the Internet or are playing content from a USB device on your TV through the home theater,

✎

you cannot select the BD/DVD mode with the

button.

SOURCE button. To select the BD/DVD mode, exit the

Internet or stop the content you are playing on the TV, and then select the BD/DVD mode.

Rear Panel

Getting Started

COOLING FAN

POWER CORD

SPEAKER OUTPUT

CONNECTORS

* Connecting the FM Antenna

1. Connect the supplied FM antenna to the FM ANT Jack.

2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a

wall or other rigid surface.

Maintain a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate

✎

ventilation. Do not obstruct the cooling fan or ventilation holes.

This product does not receive AM broadcasts.

✎

7 - English

* FM ANTENNAAUX IN

HDMI OUT

AUDIO IN (OPTICAL)

LAN TERMINAL

HDMI INEXTERNAL DIGITAL

Page 8

Getting Started

Remote Control

Tour of the Remote Control

Turn the product on and off.

Adjust the volume.

Press to open and close the disc tray.

Press to select the Home Theater's mode (HDMI, AUX, BD/DVD, etc.).

Press to skip backwards([) or

forwards(])

Press and hold to search

backwards(() or forwards()).

Press to move to the Home screen.

Select on-screen menu items and

change menu values.

,. :

Search for active FM stations

and to change channels.

Return to the previous menu.

Use to enter the Popup menu/Title

menu.

Press to apply sound effects.

Press to apply the DTS Neo:Fusion II

or 3D sound effect.

These buttons are used both for

menus on the product and also several

Blu-ray Disc functions.

Press to select MANUAL/PRESET in

the Tuner function.

Cut off the sound temporarily.

Press to play disc or files. or Press to pause playing.

Press to use the Tools menu. or To display the number keypad (may

include function keys when applicable) on the screen, press and hold the button.

Press to stop the disc playing or to exist the menu.

Press to view the disc menu.

Use to display the playback information when playing a Blu-ray/DVD disc or files.

Set a Sleep time to shut off the product.

Select STEREO or MONO for radio broadcasts.

Use to set a preset radio frequency.

While playing multimedia content in SAMSUNG APPS, press and hold 5 button on the remote to pause

✎

playback. To stop playback, press and hold

Installing batteries in the Remote Control

Use a coin to turn the remote control cover anti-clockwise to remove it as shown in the figure above.

(

EXIT) button on the remote.

Insert a 3V lithium battery. Keep the positive (+) pole upward when inserting the battery. Put the battery cover on and align the '●' marks side by side as shown in the figure above.

8 - English

Use a coin to turn the cover clockwise as far as it will go to fix it in place.

Page 9

Connections

This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Position of the product

Place it on a stand or cabinet shelf, or under the TV stand.

Selecting the Listening Position

The listening position should be located about 2.5 to 3 times the TV's screen size away from the TV. For example, if you have a 46 inch screen, locate the listening position 115 to 138 inches (9.6 to 11.5 feet) from the screen.

Subwoofer

Front (L)

Center

Product

Front (R)

Surround (R)

Connections

Surround (L)

Place these speakers in front of your listening position, facing inwards (about

Front Speakers

Center Speaker

Surround Speakers

Subwoofer

* Surround speakers must be connected to the wireless receiver module.

* The appearance of your speakers may differ from the illustrations in this manual.

45°) toward you. Place the front speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers.

It is best to install the Center Speaker at the same height as the front speakers. You can also install it directly over or under the TV.

Place these speakers to the side of your listening position. If there isn't enough room, place these speakers so they face each other. Position them about 2 to 3 feet (60 to 90cm) above your ear, facing slightly downward.

* Unlike the front and center speakers, the surround speakers are used mainly

for sound effects. Sound will not come from them all the time.

The position of the subwoofer is not so critical. Place it anywhere you like.

Wireless

Receiver Module

* Each speaker has a colored label on its back or underside. Each cable has a single colored band near

its end. Match the band on each cable to the speaker label by color, and then connect the cable to the speaker. See page 10 for exact instructions.

9 - English

Page 10

Connections

HDM

AUX IN FM ANT

OPTICAL

DIGITAL AUDIO IN

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

IMPEDANCE : 3

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

IMPEDANCE : 3

Installing the Speakers on the Tallboy Stands

* HT-H6530WM only - Front Speakers

1. Find the speaker cable that is attached to the Stand. Turn

the Stand and Stand Base upside-down, unravel the speaker cable, and then draw it through the hole in the Stand Base.

Handle the Stand carefully. It is heavy.

✎

2. Connect the Stand Base to the bottom of the Stand.

3. Insert three 5x20 screws into the marked holes in the

Stand Base, and then tighten them with a screwdriver as shown in the illustration.

4. Place the speaker cable into the slot on the bottom of the

stand base.

5. Connect the assembled stand and a speaker together by

matching the labels on the stand and speaker with each other as shown in the picture.

6. Insert a screw (5x20) into the hole on the rear of the

speaker and tighten by turning it clockwise with a screwdriver.

7. Repeat steps 1 through 6 with the other speaker and

stand.

5 6

Speaker

Stand

Stand Base

Stand

Speaker Cable Connections

1. Match each speaker cable bundle to the correct speaker by matching the color coded plug on each bundle

to the colored sticker on the bottom or back of each speaker.

2. Connect the speaker wire plugs from each speaker to the back of the product by matching the colors of

the speaker plugs to the colors of the speaker jacks.

In case of HT-H6500WM

Surround

Speaker (L)

Front Speaker (R)

Subwoofer

Wireless Receiver Module

Surround

Speaker (R)

Front Speaker (L)

Center Speaker

* Refer to page 6 for the speakers of HT-H6530WM. * This product should be connected with the SWA-6000 only.

10 - English

Page 11

If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field.

✎

Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too

✎

close to the product, sound from the speakers may be disrupted because of interference. If you use a device such as a microwave oven, wireless LAN Card, Bluetooth device, or any other device

✎

that uses the 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference.

The maximum transmission distance from the product to the wireless receiver module is about 33 feet (10m),

✎

but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the product and the wireless receiver module, the system may not operate at all, because the radio waves cannot penetrate metal.

If the product doesn't make a wireless connection, you need to run an ID Set between the product and

✎

wireless receiver module. With the product turned off, press and hold for 5 seconds. Turn on the wireless receiver module. Then, press and hold the "ID SET" button on the back of the wireless receiver module for 5 seconds, and then turn the product on.

| CAUTION |

If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall wherever



you want to hang a speaker, and then, using the hole in the rear of each speaker, carefully hang each speaker on a screw or nail.

Do not let children play with or near the speakers. They could get hurt if a speaker falls.



When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.



Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien



substances into the duct (hole) of the subwoofer speaker. Do not hang the subwoofer on the wall using the duct (hole).



The wireless receiving antenna is built into the wireless receiver module. Keep it away from water and



moisture. For optimal listening performance, make sure that the area around the wireless receiver module location is



clear of any obstructions. In 2-CH mode, you will hear no sound from the wireless surround speakers.



(mute) button on the remote control

Connections

Attaching the Toroidal Ferrite Core to the Power Cord of the Wireless Receiver Module (SWA-6000)

If you attach a Toroidal ferrite core to the power cord of the wireless receiver module, it will help prevent RF interference from radio signals.

1. Pull the fixing tab of the Toroidal ferrite core to open it.

2. Make two loops in the wireless receiver module power cord.

3. Attach the Toroidal ferrite core to the wireless receiver module's

power cord as shown in the figure on the right, and then close it by pressing it until it clicks.

• Attach the ferrite core as close to the Wireless Receiver Module as possible.

11 - English

Page 12

Connections

Connecting to a TV and External Devices

POWER

FRONT

CENTER

SUBWOOFER

Red

White

LAN

IMPEDANCE : 3

OPTICAL

DIGITAL

HDMI OUT

HDMI IN

AUDIO IN

AUX IN FM ANT

SPEAKERS OUT

AUX IN FM ANT

OPTICAL

DIGITAL

AUDIO IN

HDMI OUT

LAN

HDMI IN

Method 1 Method 2 Method 3

External Devices

AUDIO OUT

OPTICAL OUT

HDMI OUT HDMI IN

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with only this cable connected. See page 17 in this manual and the section on ARC in your TV's user's manual for details.

Connecting to External Devices

Method 1 AUX IN : Connecting an External Analog Component

Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the external analog component. > Select the AUX mode.

• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.

Method 2 OPTICAL : Connecting an External Digital Audio Component

Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-Top-Boxes) to the home theater. Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital optical cable. > Select the D. IN mode.

Method 3 HDMI IN : Connecting to an External Component with an HDMI Cable

Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device. > Select the HDMI mode.

To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.

✎

This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.

✎

This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.

✎

Selecting an External Device to Use

To select an external device after you have connected it, press the SOURCE button. Each time you press the button, the mode changes in this order :

BD/DVD  D. IN  AUX  HDMI  FM  BT

12 - English

Page 13

Connecting to a Network Router

You can connect your product to your network router using one of the methods illustrated below.

Wired Network

AUX IN FM ANT

POWER

SPEAKERS OUT

FRONT

IMPEDANCE : 3

CENTER

SUBWOOFER

OPTICAL

AUDIO IN

LAN

DIGITAL

HDMI OUT

HDMI IN

Broadband modem

(with integrated router)

Broadband

service

Wireless Network

Wireless IP sharer

Broadband

service

Connections

Router

Broadband

service

Broadband

modem

Your router or your Internet Service Provider's

✎

policies may prevent the product from accessing Samsung's software update server. If this occurs, contact your Internet Service Provider (ISP) for more information.

DSL users, please use a router to make a network

✎

connection. To use the DLNA function, you must connect your

✎

PC to your network as shown in the illustrations above. The connection can be wired or wireless.

If your wireless IP router supports DHCP, this

✎

product can use a DHCP or static IP address to connect to the wireless network.

Set your wireless IP router to Infrastructure mode.

✎

Ad-hoc mode is not supported. The product supports only the following wireless

✎

security key protocols:

- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)

Select a channel on the wireless IP router that is

✎

not currently being used. If the channel set for the wireless IP router is currently being used by another device nearby, it will result in interference and communication failure.

In compliance with the newest Wi-Fi certification

✎

specifications, Samsung home theaters do not support WEP, TKIP, or TKIP-AES (WPS2 Mixed) security encryption in networks running in the

802.11n mode. Wireless LAN, by its nature, may cause

✎

interference, depending on the operating conditions (AP performance, distance, obstacles, interference by other radio devices, etc).

13 - English

Page 14

Settings

The Initial Settings Procedure

• The Home menu will not appear if you do not configure the initial settings.

• The OSD (On Screen Display) may change in this product after you upgrade the software version.

• The access steps may differ depending on the menu you selected.

After you have finished connecting the home theater to your TV, turn on the TV, and then turn on the home theater. The first initial setup screen appears. The setup screens appear in this order: Language, Network Configuration, Terms and Conditions, Screen Resolution (Aspect Ratio), and Speaker Layout. Depending on the software version installed on your home theater, you may also see the Software Update screen. Follow the instructions displayed on each screen, which will guide you through the easy setup procedure.

If you are not ready to set up the network configuration or it is problematic, you can select Skip and set it up later.

To edit your settings after the initial setup, select

✎

Settings > System > Setup in the Home screen or select the Reset option. (See page 20)

(See page 20)

The Home Screen at a Glance

1234

PLAY DISC

MOVIES & TV SHOWS

MULTIMEDIA

SAMSUNG APPS

MOVIES & TV SHOWS

Download movies and TV Shows from the Internet.

Depending on your country, this menu function

✎

may not be supported.

MULTIMEDIA

Play photos, videos, or music content from Discs, USB devices, PCs, mobile devices, or cloud services.

SAMSUNG APPS

Download/Access various for pay or free-ofcharge applications.

RECOMMENDED

A list of useful and popular apps we recommend you download.

MY APPS

Displays downloaded and installed apps. You can change the display order. (See page 42)

Screen Mirroring

Set up the wireless mirroring function between the home theater and a smart phone or tablet.

Depending on your country, this menu function

✎

may not be supported.

Function

Use to switch between external devices connected to Digital In, AUX, or HDMI IN, to switch to the Tuner, or to switch to a connected Bluetooth device. You can also use the remote's

button or the main unit's

button.

SOURCE

No Disc

RECOMMENDED MY APPS

App 1 App 2 App 3 App 4 App 5 App 6

Screen Mirroring

56 897

PLAY DISC

Displays information about the disc currently in the disc tray. Press

OK to start playing the disc.

Function Settings

14 - English

Settings

Set various functions to suit your personal preferences.

Selecting an Option on the Home Screen

1. To select an option on the Home screen, move

the cursor using the highlights the option of your choice, and then press the

If you leave the product in the stop mode for more

✎

than 5 minutes without using it, a screen saver will appear on your TV. If the product is left in the screen saver mode for more than 20 minutes, the power will automatically turn off.

OK button.

buttons until it

Page 15

Accessing the Settings Screen

1. Select Settings on the Home screen, and then

OK. The Settings screen appears.

press

Settings

Picture

Sound

Network

Smart Hub

System

Support

3D Settings TV Aspect Ratio BD Wise Off Resolution Auto Movie Frame (24Fs) Auto DVD 24Fs Conversion Off Fit Screen Size Size 3

16:9 Original

2. To access the menus, sub-menus, and options

on the Settings screen, please refer to the remote control illustration below.

Buttons on the Remote Control Used for the Settings Menu

Detailed Function Information

Each Settings function, menu item, and individual option is explained in detail on-screen. To view an explanation, use the

buttons to select the function, menu item, or option. The explanation will usually appear on the right of the screen.

A short description of each Settings function starts below. Additional information on some of the functions is also in the Appendix of this manual.

Settings Menu Functions

Picture

3D Settings

Set up the 3D related functions.



3D Blu-ray Playback Mode: Select whether to play a Blu-ray Disc with 3D contents in 3D Mode. If you move to the Home or Smart Hub Home menu while in 3D mode, the product will switch to 2D automatically.

Screen Size: Enter the size of the TV attached to

the product. The product will automatically adjust the 3D output to the screen size of the TV.

Carefully read the health and safety information

✎

before viewing

3D content. (See page 4)

Settings

HOME Button : Press to move to the Home

screen.

RETURN) Button : Press to return to the

(

previous menu.

OK / DIRECTION Button :

• Press

select an item.

• Press the currently selected item or confirm a setting.

EXIT) Button : Press to exit the current

(

menu.

to move the cursor or

OK button to activate the

3 4

TV Aspect Ratio

Lets you adjust the output of the product to the screen size of your TV. (See page 49)

BD Wise

BD Wise is Samsung’s latest inter-connectivity

feature. When you connect a Samsung product and a Samsung TV with BD Wise to each other via HDMI, and BD Wise is on in both the product and TV, the product outputs video at the video resolution and frame rate of the Blu-ray/DVD Disc.

Resolution

Lets you set the output resolution of the HDMI video signal to BD Wise, Auto, 1080p, 1080i, 720p, 480p. The number indicates the number of lines of video per frame. The i and p indicate interlaced and progressive scan, respectively. The more lines, the higher quality.

15 - English

Page 16

Settings

Movie Frame (24Fs)

Setting the Movie Frame (24Fs) feature to Auto lets the product adjust its HDMI output to 24 frames per second automatically for improved picture quality if attached to a 24Fs compatible TV.

• You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate.

• Movie Frame is only available when the product is in the HDMI 1080p output resolution modes.

DVD 24Fs Conversion

Converts DVD playback to 24 frames per second and outputs it via HDMI. This option is only available when Movie Frame (24Fs) is set to on.

Fit Screen Size

Lets you select the optimal size for the Smart Hub or Screen Mirroring screen.

HDMI Color Format

Lets you set the color space format for the HDMI output to match the capabilities of the connected device (TV, monitor, etc).

HDMI Deep Color

Lets you set the product to output video from the HDMI OUT jack with Deep Color. Deep Color provides more accurate color reproduction with greater color depth.

Progressive Mode

Lets you improve picture quality when viewing DVDs.

Sound

Simple Speaker Setup

Lets you configure the settings of the speakers you have connected to obtain the best possible surround sound.

Normal Mode: Select if you have set up your

speakers in the recommended speaker layout with the surround speakers next to or behind the listening positions.

Simple Mode: Select if you have put your

surround speakers in front of the listening position. Downmixes the front sound to the surround sound speakers.

SFE, Virtual 7.1 will not operate when the

✎

simple mode is on.

Speaker Settings



Sound Output : Lets you select which speakers are active, either the TV's speakers or the home theater's speakers.

Settings (Home Theater Speakers) : Lets you

adjust the following speaker settings and turn the test tone on and off so you can test the speakers.

- Volume Level : Lets you adjust the relative loudness of each speaker from 6dB to -6dB. For example, if you like deep bass, you can increase the loudness of the subwoofer by 6dB.

- Distance : Lets you adjust the relative distance of each speaker from the listening position up to 30 feet. The farther the distance, the louder the speaker will be.

- Speaker Test surround sound configuration. Press Stop

Test to stop the test while it is in progress.

Settings (Multiroom Link) : You can enjoy

sound through a remote speaker that is connected to the home theater through your home network. To use the network speaker, select Multiroom. If there is a network speaker available, it will appear on the screen. Move to the desired network speaker and select it. When a popup dialog is displayed, you can edit the network speaker’s name or set whether to use it or not.

- Don't Use : The network speaker is not used.

- Multiroom : The network speaker outputs audio. All network speakers output the same audio regardless of channel using the PCM format only.

SOUND EFFECT and 3D SOUND are not

✎

applied if Multiroom is set to on. The network speaker is not available when

✎

Screen Mirroring is active.

Sound Customizer

Sound Customizer lets you calibrate the home theater for the optimal sound quality based on your hearing level and the ambient conditions.

To create a Custom Sound Profile, follow these steps:

1. In the Sound Customizer Menu, select Add Custom Sound.

2. On the next screen, select Start. The Preview

screen appears.

3. Select Preview to preview the Test Sound. Select Next, and then press

Begins a test to set the best

OK to continue.

16 - English

Page 17

4. A 6-step test will start. During each stage, the TV will sound a test tone at a different frequency. The tone will begin softly and increase in volume. Select Yes when you can hear the test tone. If you want to listen to it again, select Retry. Each time you select Yes, the TV will move on to the next tone. Once the test is complete, a screen appears that lets you compare the original sound to the calibrated sound.

5. Select Next, and then press the continue. The on-screen keyboard appears with a default profile name.

6. Enter a name for the calibrated sound profile or accept the default name, select Done, and then press the

7. Select Done on the next screen, and then press the screen reappears.



Custom Sound Profile : Select a Sound Profile you created to activate it. Or select Hearing Impaired, a Custom Sound Profile especially composed of large sounds for those with hearing disorders.

If there are more than 3 Custom Sounds

✎

registered, Family mode will be activated which is composed of the average value of all registered profiles.

Add Custom Sound : Create and add a new

Custom Sound Profile. See the instructions

above.

Edit Custom Sound : Choose a Custom Sound

Profile to modify it. Follow the same steps you

used when creating a sound profile. This function is only available if you have added a Custom Sound

Profile using Add Custom Sound. (See above.)

Manage Custom Sound : Rename or delete

Custom Sound Profiles. This function is only available if you have added a Custom Sound Profile using Add Custom Sound. To select a profile, highlight the check box to the right of the profile, and then select Rename or Delete.

Equalizer

Lets you configure the Equalizer settings manually.

Smart Volume

Lets you set the product so that the volume remains stable when a scene change occurs or when you change the channel.

OK button.

OK button. The Sound Customizer

OK button to

Audio Return Channel (ARC)

Lets you direct the sound from the TV to the Home Theater speakers. Requires an HDMI connection and an Audio Return Channel (ARC) compatible TV.

• If Audio Return Channel is set to On and you are using an HDMI cable to connect the product to the TV, digital optical input is disabled.

• If Audio Return Channel is set to Auto and you are using an HDMI cable to connect the product to the TV, ARC or digital optical input is selected automatically.

Digital Output

Lets you set the Digital Output to match the capabilities of the AV receiver you’ve connected to the product. For more details, please refer to the digital output selection table. (See page 55)

Dynamic Range Control

Lets you apply dynamic range control to Dolby Digital, Dolby Digital Plus, and Dolby TrueHD audio.

Auto: Automatically controls the dynamic range

of Dolby TrueHD audio, based on information in the Dolby TrueHD soundtrack. Also turns dynamic range control off for Dolby Digital and Dolby Digital Plus.

Off: Leaves the dynamic range uncompressed,

letting you hear the original sound.

On: Turns dynamic range control on for all three

Dolby formats. Quieter sounds are made louder and the volume of loud sounds is reduced.

Downmixing Mode

Lets you select the multi-channel downmix method that is compatible with your stereo system. You can choose to have the product downmix to

Normal Stereo or to Surround Compatible.

Audio Sync

When the product is attached to a digital TV, lets you adjust the audio delay so that the audio syncs with the video. You can set the delay between 0 and 300 milliseconds.

The Auto function in Audio Sync is guaranteed

✎

to work only with a Samsung TV that supports the ARC function (the Anynet+ function).

Settings

17 - English

Page 18

Settings

Network

Network Status

Lets you check the current network and Internet status.

Network Settings

Lets you configure the network connection so you can enjoy various features such as Internet services or AllShare Wi-Fi functionality, and perform software upgrades.

Wi-Fi Direct

Lets you connect a Wi-Fi Direct device to the product using a peer-to-peer network, without the need for a wireless router. Note that if the product is connected to a wireless network, it may be disconnected when you use Wi-Fi Direct. (See page 23)

Text files, such as files with a .TXT or .DOC

✎

extension, will not display when you are using the

Wi-Fi Direct function.

Multimedia Device Settings

Allow other devices on your network, such as smart phones and tablets, to share content with your product.

Device Name

Lets you assign an identifying name to the product. You use this name to identify the product when you are connecting external Wi-Fi devices (smart phones, tablets, etc.) to it.

BD-Live Settings

Lets you set various BD-Live functions. BD-Live allows you to access extra features available on some Blu-ray Discs if you are connected to the Internet.



BD-Live Internet Connection : Lets you fully allow, partly allow, or prohibit a BD-Live Internet connection.

BD Data Management : Manage BD data

downloaded from a BD-Live service or Blu-ray Disc.

To use BD-Live, you must insert a USB storage

✎

device into the home theater's USB port.

Smart Hub

Apps Settings

You can edit the settings for using Apps.



Push Notification Settings : Receive notifications from selected services.

VOD Rating Lock

Lets you lock access to Video on Demand (VOD) content based on its rating. To use, you must enter the security PIN. the Num pad appears on the screen. When the Num pad appears, select a number using the button and then press the

The default security PIN is 0000.

✎

Depending on your country, this menu function

✎

may not be supported.

Caption

Use to modify captions on VOD playback that supports closed captions. Lets you change

displayed caption's font color and size.

The Caption function does not work with VOD

✎

services that don't support closed captions. For some VOD services that do support closed captions, the functions settings may not be applied.

Depending on your country, this menu function

✎

may not be supported.

Terms & Policy

Samsung Account Terms and Conditions, Privacy Policy

You can view the terms of use and privacy policy for Smart Hub, Samsung accounts, and various other services

Reset Smart Hub

Resets all Smart Hub settings to their default settings. To use, you must enter the security PIN. Press and hold the 123 button until the Num pad appears on the screen. When the Num pad appears, select a number using the press the

✎

The default security PIN is 0000.

Press and hold the 123 button until

button.

button and then

18 - English

Page 19

System

Security

Setup

Lets you re-run the Initial Settings procedure. Refer to the descriptions displayed on the screen.

Quick Start

Lets you set the player to turn on quickly by decreasing the boot time.

If this function is set to On, Standby power

✎

consumption will increase. (About 12W ~ 20W)

Language

Lets you select the language you prefer for the onscreen menu, disc menu, audio, subtitles, etc.

• The language you select for the disc menu, disc audio, or subtitles will only appear if it is supported on the disc.

Device Manager

Lets you connect a wireless USB keyboard or mouse to the USB port on the front of the product.



Keyboard Settings: Lets you configure a wireless USB keyboard connected to the product.

You can use the keyboard only when a

✎

QWERTY keyboard screen or window appears in the Web Browser.

Mouse Settings: Lets you configure a wireless

USB mouse connected to the product. You can use the mouse in the product's menu in the same way you use a mouse on your PC.

To use a mouse with the product's menu:

1. Connect the USB mouse to the

2. Click the primary button you selected in

Mouse Settings. The Simple Menu appears.

3. Click the menu options you want.

Some USB HID keyboards and mice may not be

✎

compatible with your product. Some HID keyboard keys may not work.

✎

Wired USB keyboards are not supported.

✎

product

Press and hold the 123 button until the Num pad appears on the screen. When the Num pad appears, select a number using the

press the

0000. Enter the default PIN to access the security function if you haven't created your own PIN.



BD Parental Rating: Blu-ray Discs with a rating equal to or above a specific age rating you have set unless you enter the PIN.



DVD Parental Rating: Prevents playback of DVDs with a rating above a specific numerical rating you have set unless you enter the PIN.

Change PIN: Lets you change the 4-digit PIN used

to access security functions.

If you forget your PIN

1. Remove any disc or USB storage device.

2. Press and hold the @ button on the front

panel for 5 seconds or more. All settings will revert to the factory default settings.

When the factory default settings are restored,

✎

all the user stored BD data is deleted.

General

Lets you specify the display brightness and time zone.



Front Display: Lets you change the brightness of the front panel.

Time Zone: You can specify the time zone that is

applicable to your area.

Menu Transparency: Lets you adjust the

transparency of the menu box.

Anynet+ (HDMI-CEC)

Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature, and lets you control those products with one Samsung TV remote. To operate this function, you must connect this product to an Anynet+ Samsung TV using an HDMI cable.

button.



The default security PIN is

Prevents playback of

button and then

Settings

Some applications may not be supported.

✎

If a wireless HID Keyboard does not operate

✎

because of interference, move the keyboard closer to the

product.

19 - English

Page 20

Settings

To use an Anynet+ (HDMI-CEC) function, follow the instructions below.

1) Connect the product to an Anynet+ (HDMI- CEC)-compliant Samsung TV using HDMI Cable.

2) Set the Anynet+ (HDMI-CEC) feature to On in both the TV and the product.

3) Search for and then select the product in the TV's Anynet+ (HDMI-CEC) list. For more exact instructions, see the Anynet+ section of the TV's user's manual.

Support

Remote Management

When activated, lets Samsung Call Center agents diagnose and fix problems with the product remotely. Requires an active Internet connection. Remote Management service might not be available in some countries.

Software Update

For more information about the Software Update function, see "Upgrading Software" on page 24.

Use Mode

Lets you set the Use Mode. If you are using the home theater at home, always select Home Use.

Store Demo is for retail display settings only.

Contact Samsung

Provides contact information for assistance with your product.

Reset

Reverts all settings to their defaults except for the network and Smart Hub settings. Requires that you enter your security PIN. button until the Num pad appears on the screen. When the Num pad appears, select a number using

the The default security PIN is 0000.

button and then press the OK button.

Press and hold the 123



Network Setup

When you connect this product to a network, you can use network based applications and functions such as Smart Hub and BD-LIVE, and upgrade the product's software through the network connection. For more information about accessing and using Internet services, see the Network Services chapter of this manual on pages 41~48. Instructions for configuring the network connection start below.

Configuring Your Network Connection

If you didn't configure your network connection during the initial settings procedure or you need to reset the network connection, follow the directions below.

Before you begin, contact your Internet Service Provider to find out if your IP address is static or dynamic. If it is dynamic, and you have a wired or wireless network, we recommend using the Automatic configuration procedures described below.

If you are connecting to a wired network, connect the product to your router using a LAN cable before you start the configuration procedure.

To begin configuring your network connection, follow these steps:

1. In the Home screen, select Settings, and then press the

2. Select Network, and then press the

3. Select Network Settings, and then press the

OK button.

4. Go to the instructions for Wired networks

starting below or the instructions for Wireless networks starting on page 21.

Wired Network



Wired – Automatic

After following Steps 1 to 3 above:

1. In the Network Settings screen, change Network type to Wired. Then, select Connect

and press the the wired connection, verifies the network connection, and then connects to the network.

2. When it is done, highlight OK, and then press

OK button.

OK button. The product detects

20 - English

Page 21



Wired - Manual

If you have a static IP address or the automatic procedure does not work, you'll need to set the Network Settings values manually.

After following Steps 1 to 3 above:

1. In the Network Settings screen, change Network type to Wired. Then, select Connect

and press the

OK button.

The product searches for a network, and then displays the connection failed message.

If it is possible to connect the home theater to

✎

your network wirelessly, select Change Network at this point, change the Network type to Wireless, and then go to the instructions for wireless networks on this page.

Network Settings

Wired network connection failed.

MAC Address XX:XX:XX:XX:XX:XX IP Address 0. 0. 0. 0 Subnet Mask 0. 0. 0. 0 Gateway 0. 0. 0. 0 DNS Server 0. 0. 0. 0

Unable to connect to the network. Try the following: check if your IP address is set correctly in IP Settings. Contact your Internet Service Provider for more information.

You can get the network parameter values from

✎

your Internet provider.

7. When finished entering all the parameter values, select OK, and then press the

OK button. The

home theater verifies the network connection and then connects to the network.

Wireless Network

You can set up a wireless network connection in three ways:

- Wireless Automatic

- Wireless Manual

- WPS(PBC)

Before you configure the wireless network connection, disconnect any wireless network devices currently connected to the product or, if applicable, the product's current wired connection.



Wireless - Automatic

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 20:

1. In the Network Settings screen, change Network type to Wireless. The product

searches for and then displays a list of the available networks.

Settings

Change Network IP Settings Retry Close

2. Use the buttons to select IP Settings, and

then press the

OK button. The IP Settings

screen appears.

3. Select the IP Setting field, and then set it to Enter manually.

4. Select a parameter to enter (IP Address, for

example), and then press

OK. Use the

buttons on the remote control to enter the numbers for the parameter. keypad to enter a parameter number.

Or use the Num



Press and hold the 123 button until the Num pad appears on the screen. When the Num pad appears, select a number using the

the

button.

Use the buttons on the

button and then press

remote control to move from entry field to entry field within a parameter. When done with one parameter, press the

OK button.

5. Press the , or . button to move to another

parameter, and then enter the numbers for that parameter following the instructions in Step 4.

6. Repeat Steps 4 and 5 until you have filled in all parameters.

Network Settings

Select your network type.

Network type Wireless

Wireless network

si-ap

iptime

KIMING_VTOWER

Refresh WPS(PBC)

You can connect your Bluray player to the internet. Please select which wireless network to use.

2. Select the desired network, and then press the

OK button.

3. On the Security screen, enter your network's

security code or pass phrase. Enter letters by selecting a letter with buttons, and then pressing

OK button.

4. When finished, select Done, and then press the

OK button. The product verifies the network

connection and then connects to the network.

21 - English

Page 22

Settings

You should be able to find the security code or

✎

pass phrase on one of the set up screens you used to set up your router or modem.



Wireless - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 20:

1. In the Network Settings screen, change Network type to Wireless. The product

searches for and then displays a list of the available networks.

2. Scroll through the list, select the desired network or Add Network, and then press the

3. If you selected a network in Step 2, go to Step 6. If you selected Add Network, go to Step 4.

4. Enter your wireless network or wireless router's name.

• Enter letters by selecting a letter with the

button.

• To display capital letters (or redisplay lower

case letters if capital letters are displayed), select

• To display symbols and punctuation, select

123#&, and then press the

redisplay letters, select 123#&, and then press the

When finished, select Done, and then press the

OK button.

5. On the Security type screen that appears,

use the Security type, and then press the On the next screen, enter your network's security code or pass phrase.

• Enter letters by selecting a letter with the

button.

When finished, select Done, and then press

OK button. The product searches for the

the network.

6. The Network connection fail screen appears. Use then press the

7. Select the IP Setting field, and then set it to Enter manually.

buttons, and then pressing the OK

, and then press the OK button.

OK button. To

OK button.

buttons to select the network's

buttons, and then pressing the OK

buttons to select IP Settings, and

OK button.

8. Select a network parameter to enter (IP Address, for example), and then press

button. Use the control to enter the numbers for the parameter. Or use the Num keypad to enter a parameter



number. Num pad appears on the screen. When the Num pad appears, select a number using the button and then press the

entry field to entry field within a parameter. When done with one value, press the

9. Press the , or . button to move to another parameter, and then enter the numbers for that parameter following the instructions in Step 8.

10. Repeat Steps 8 and 9 until you have filled in all parameters.

You can get the Network parameter values from

✎

your Internet provider.

11. When finished, select OK, and then press the

OK button. The Security screen appears.

12. On the Security screen, enter your network's

security code or pass phrase. Enter letters by selecting a letter with the then pressing the

13. When finished, select Done at the right of the screen, and then press the product verifies the network connection and then connects to the network.

14. After the home theater verifies the network, select OK, and then press the

You can also begin the Manual Network setup by

✎

going to Settings > Network > Network Status.



WPS(PBC)

One of the easiest ways to set up the wireless network connection is using the WPS(PBC) function. If your wireless router has a WPS(PBC) button, follow these steps:

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 20:

1. In the Network Settings screen, change Network type to Wireless. The product

searches for and then displays a list of the available networks.

Press and hold the 123 button until the

buttons on the remote control to move from

buttons on the remote

button.

OK button.

OK button. The

OK button.

buttons, and

Use the

22 - English

Page 23

2. Scroll the list down, select WPS(PBC), and then press the

3. Press the WPS(PBC) button on your router within two minutes. Your product automatically acquires all the network settings values it needs and connects to your network after the network connection is verified.

4. When it is done, highlight OK, and then press the

For a WPS connection, set your wireless router’s

✎

security encryption to AES. WEP security encryption does not support a WPS connection.

OK button.

Wi-Fi Direct

The Wi-Fi Direct function allows you to connect Wi-Fi Direct devices to the product and each other

using a peer-to-peer network, without a wireless router.

Some Wi-Fi Direct devices may not support the

✎

AllShare function if connected via Wi-Fi Direct. If this is the case, change the network connection method you used to connect the device to the home theater.

Wi-Fi Direct transmissions can interfere with

✎

Bluetooth signals. Before you use the Bluetooth function, we strongly recommend that you turn off the Wi-Fi Direct function on any device in which it is currently on.

1. Turn on the Wi-Fi Direct device and activate its Wi-Fi Direct function.

2. In the Home screen, select Settings, and then

press the

3. Select Network, and then press the

4. Select Wi-Fi Direct, and then press the

button. The Wi-Fi Direct devices that you can connect the home theater to appear.

Settings

OK button.

Wi-Fi Direct

Device Name : [HTS]H6500WM Select your Wi-Fi Direct device to connect to.

AndroidXXXXXXX Disconnected

Refresh

5. You have three ways to complete the Wi-Fi

connection:

• Through the Wi-Fi device.

• Through the product using PBC.

• Through the product using a PIN.

Each is covered below.

Through the Wi-Fi Device

1. On the Wi-Fi device, follow the device's procedure for connecting to another Wi-Fi Direct device. See the device's user manual for

instructions.

2. When you have completed the procedure, you should see a pop-up on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Select OK, and then press the

3. The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

• The PBC and PIN procedures connect devices automatically.

OK button to accept.

Through the Product Using PBC

1. Select the Wi-Fi Direct device you want to

connect to this product, and then press the button.

2. The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

Through the Product Using a PIN

1. Select the Wi-Fi Direct device you want to

connect to this product, and then press the button.

2. The PIN pop-up appears.

3. Note the PIN code in the pop-up, and then enter

it into the appropriate field in the Wi-Fi Direct device you want to connect.

4. The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

The current wired or wireless network connection

✎

will be disconnected when you use the Wi-Fi Direct function.

Settings

23 - English

Page 24

Settings

Text files, such as files with a .TXT or .DOC

✎

extension, will not display when you are using the Wi-Fi Direct function.

Upgrading Software

The Software Update menu allows you to upgrade the product’s software for performance improvements or additional services.

• Never turn the product off or back on manually during the update process.

1. In the Home menu, select Settings, and then press the

2. Select Support, and then press the

3. Select Software Update, and then press the

OK button.

4. To download update software and update now,

select Update now, and then press the button. See "Update now" on this page for details.

5. To let the product download update software automatically when available, select Auto Update, and then press the page 24)

The upgrade is complete when the product turns

✎

off, and then turns on again by itself. Samsung Electronics takes no legal responsibility

✎

for product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade.

If you want to cancel the upgrade while the

✎

upgrade software is downloading, press the button.

When a system upgrade is in progress, "UPDATE"

✎

is displayed on the front panel.

OK button.

OK button. (See

Update now

You can use Update now to update the software through your network connection or by using a USB flash drive. The network instructions are below. The USB flash drive instructions are on the next page.

1. Select Update now, and then press the button.The Update now pop-up appears.

2. The product searches on line for the latest software version.

3. If it does not find an update, the "There are no

new updates for you at the moment." pop-up appears. Press the

4. If it finds a new version, the Update Request pop-up appears.

5. Select OK. The product upgrades the software, turns off, and then turns on automatically.

6. If you do not select OK or Cancel in one minute, the product stores the new upgrade software. You can upgrade the software later using Auto

Update.

7. If you select Cancel, the product cancels the

upgrade.

When the system upgrade is done, check the

✎

software details in the Product Information section of the Contact Samsung screen.

Do not turn off the product during the Software

✎

Upgrade. It may cause the product to malfunction.

OK button to exit.

Auto Update

You can set the Auto Update function so that the product downloads new upgrade software when it is in Auto Update mode.

In Auto Update mode, the product is on, but its Internet connection is active. This allows the product to download upgrade software automatically, when you are not using it.

1. Press the mode, and then press the

2. Select On or Off. If you select On, the product will automatically download new upgrade software when it is in Auto Update mode with the power on. If it downloads new upgrade software, the product will ask you if you want to install it when you turn the product on.

To use the Auto Update function, your product

✎

must be connected to the Internet.

buttons to select Auto Update

OK button.

24 - English

Page 25

Update by USB

1. Visit www.samsung.com.

2. Click SUPPORT on the top right of the page.

3. Enter the product's model number into the

search field. As you enter the model number, a drop down will display products that match the model number.

4. Left click your product's model number in the drop down list.

5. On the page that appears, scroll down to and then click Firmware Manuals & Downloads.

6. Click Firmware in the center of the page.

7. Click the ZIP button in the File column on the

right side of the page.

8. Click Send in the first pop-up that appears. Click OK in the second pop-up to download and save the firmware file to your PC.

9. Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file.

10. Copy the folder to a USB flash drive.

11. Make sure no disc is inserted in the product,

and then insert the USB flash drive into the USB port of the product.

12. In the product’s menu, go to Settings > Support > Software Update.

13. Select Update now.

14. The product searches for the software on the

USB drive. When it finds the software, the Update Request pop-up appears.

15. Select OK. The product upgrades the software, turns off, and then turns on automatically.

There should be no disc in the product when you

✎

upgrade the software using the USB jack. When the system upgrade is done, check the

✎

software details in the Product Information section of the Contact Samsung screen.

Do not turn off the product during the software

✎

upgrade. It may cause the product to malfunction. Software upgrades using the USB jack must be

✎

performed with a USB flash drive only.

Settings

25 - English

Page 26

Playing Content

Your home theater can play content located on Bluray/DVD/CD discs, USB devices, PCs, smart phones, tablets, and on the Web.

To play content located on your PC or a mobile device, you must connect the PC or mobile device and the product to your network. To play content on your PC, you must also download and install AllShare network software or already have DLNA network software on your PC.

PCs running Windows 7 and Windows 8 have

✎

DLNA software (Play To) built in.

Playing Commercial Discs

1. Press the  button to open the disc tray.

2. Place a disc gently into the disc tray with the

disc’s label facing up.

3. Press the  button to close the disc tray. Playback starts automatically.

4. If playback does not start automatically, press the p button on the remote.

Keep in a cool ventilated area. Keep in a clean protective jacket and store

vertically.

Playing Multimedia Files

1. In the Home screen, select MULTIMEDIA, and then press the screen appears.

2. Select Storage, Network Device, or Storage Service at the bottom of the screen.

• Storage - Displays storage devices connected

to the product.

• Network Device - Displays mobile devices,

PCs, tablets, and similar devices connected through the network.

• Storage Service - Displays the cloud services

you are logged in to.

When you select an item, information about the

✎

item scrolls across the bottom of the item's listing window.

3. Select an item or device, and then press the button. A screen appears listing the contents of the item or device. Depending on how the contents are arranged, you will see either folders, individual files, or both.

4. If necessary, use the a folder, and then press the

OK button. The Recently Played

buttons to select

OK button.

Disc Storage & Management

• Holding Discs

- Fingerprints or scratches on a disc may reduce sound and picture quality or cause skipping.

- Avoid touching the surface of a disc where data has been recorded.

- Hold the disc by the edges so that fingerprints will not get on the surface.

- Do not stick paper or tape on the disc.

• Cleaning Discs

- If you get fingerprints or dirt on a disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

- When cleaning, wipe gently from the inside to the outside of the disc.

- Disc Storage

Do not keep in direct sunlight.

5. Use the

or play, and then press the

6. The selected file plays.

7. Press the ' (

or the screen.

8. Go to pages 28~39 for instructions that explain how to control playback of videos, music, and pictures on a storage device.

To list only one type of media file, use the

✎

Filter(

item or device screen.

In the Filter( ) drop down, select Photos,

✎

Videos, or Music. Even though the product will display folders that

✎

contain all content types, it will only display files of the content type you selected For example, if you selected Music, you will only be able to see music files.

) function in the top-right corner of the

buttons to select a file to view

OK button.

RETURN) button to exit a folder

(

EXIT) button to return to the Home

26 - English

Page 27

Playing Files on a Storage Device

App

App 2

App 3

App

App 6

MULTIMEDIA

Method 1 : If the product is turned on after you connect a storage device

1. Turn the product on.

2. Follow the directions in “Playing Multimedia Files” on page 26. In Step 2, select Storage.

Method 2 : If you connect a USB device while the product is turned on

1. Connect the storage device to the product. (a recorded CD, a USB device, etc.) The "New device connected." pop-up appears. If two or

more storage devices are connected, use the

buttons to switch between devices.

PLAY DISC

LAY DIS

No Disc

No Di

RECOMMENDED MY APPS

RECOMMENDE

App 1 App 2 App 3 App 4 App 5 App 6

If the pop-up does not appear, go to Method 1.

✎

2. Use the Photos, Videos, or Music, and then press the

OK button. Depending on how the contents are

arranged, you will see either folders, individual files, or both.

To list only one type of media file, use the

✎

Filter(

item or device screen.

In the Filter( ) drop down, select Photos,

✎

Videos, or Music. Even though the product will display folders that

✎

contain all content types, it will only display files of the content type you selected For example, if you selected Music, you will only be able to see music files.

3. If necessary, use the a folder, and then press the

MOVIES & TV SHOWS

OVIES & TV SHOW

New device connected.

USB Flash Disk

All Content

Photos

Videos

Music

buttons to select All Content,

MULTIMEDIA

Screen Mirroring

creen MirroringFunctio

Function Settings

SAMSUNG APPS

SAMSUNG APP

) function in the top-right corner of the

buttons to select

OK button.

ettings

4. Select a file to view or play, and then press the

OK button.

5. Press the ' (

or the

RETURN) button to exit a folder

EXIT) button to return to the Home

(

screen.

6. Go to pages 28~39 for instructions that explain how to control playback of videos, music, and pictures on a storage device.

If you insert a disc when playing a USB device

✎

or phone, the device mode changes to "Disc" automatically.

If your cellular phone is DLNA compatible, you

✎

can play contents without connecting a USB cable.

Playing Media Content Saved on a Computer/Mobile Device

You can play media content on the Home theater that is stored on a computer or mobile device connected to the same network as the Home theater.

Samsung Link software must be installed on the

✎

computer that contains the content you want to play on the Home theater. The mobile device must support Samsung Link. For more information, visit Samsung’s content and service portal at http:// link.samsung.com.

You may experience compatibility issues when

✎

attempting to play media files via a third-party DLNA server.

The content shared by a computer or a mobile

✎

device may not play depending on the encoding type and file format of the content. In addition, some functions may not be available.

The media content may not play smoothly

✎

depending on the network status. If this occurs, use a USB storage device.

1. In the Home screen, select MULTIMEDIA, and then press the

2. Select Network Device at the bottom of the screen, and then press the devices connected to the same network as the Home theater are listed.

3. Select a storage device, and then press the

OK button. The folders and files shared by the

selected storage device are listed.

4. If necessary, use the a folder, and then press the

OK button.

OK button. Storages

buttons to select

OK button.

Playing Content

27 - English

Page 28

Playing Content

5. Select a file to view or play, and then press the

OK button.

Press the ' (RETURN) button to exit a folder or the

7. Go to pages 28~39 for instructions that explain how to control playback of videos, music, and pictures on a storage device.

To list only one type of media file, use the

✎

Filter(

item or device screen.

In the Filter( ) drop down, select Photos,

✎

Videos, or Music. Even though the product will display folders that

✎

contain all content types, it will only display files of the content type you selected For example, if you selected Music, you will only be able to see music files.

Alternatively, move to the media content to play

✎

and press the

EXIT) button to return to the Home screen.

(

) function in the top-right corner of the

OK button to play the content.

Playing Media Content Saved in a Cloud Service

Dropbox and SkyDrive and other cloud services save user content such as photos, videos, and music files on a remote server accessible through the Internet. When your home theater is connected to the Internet, you can view or play the media content saved in a cloud service through the home theater.

To play the content in a cloud service, you must

✎

log into your Samsung account and link the Samsung account to the cloud service account. For the information about linking your Samsung account to a cloud service account, refer to the "Logging In to Your Samsung Account" section.

1. In the Home screen, move to MULTIMEDIA and

OK button.

press

2. Select Storage Service at the bottom of the screen.

3. The cloud services linked with your Samsung account appear.

4. Select a cloud service. The folders and files in the selected cloud service are listed.

5. If necessary, use the a folder, and then press the

6. Select a file to view or play, and then press the

OK button.

buttons to select

OK button.

Press the ' (RETURN) button to exit a folder or the

8. Go to pages 28~39 for instructions that explain how to control playback of videos, music, and pictures located in a Storage Service.

EXIT) button to return to the Home screen.

(

Controlling Video Playback

You can control the playback of video content located on a Blu-ray/DVD disc, USB device, mobile device, or PC. Depending on the disc or contents, some of the functions described in this manual may not be available.

Buttons on the Remote Control used for Video Playback

Using the disc menu, title menu, popup

menu, and title list

DISC MENU

During playback, press this button to display the Disc menu.

TITLE MENU

During playback, press this button to display the Title menu or Popup menu.

• If your disc has a playlist, press the Sort By button to go to the playlist.

Playback related buttons

The product does not play sound in Search, or Slow mode.

• To return to normal speed playback, press the

button.

28 - English

Page 29

Starts/Pauses playback.

Select Scene

EXIT)

(

Fast

Motion

Play

Slow

Motion

Play

Skip

Motion

Play

Stops playback.

During playback, press and hold the [ or ] button. Each time you press and hold the

[

or ] button, the playback

speed will change.

In pause mode, press and hold the ] button. Each time you press and hold the

]

button, the playback speed

will change.

During playback, press the [ or

]

button.

Each time you press the [ or

]

button, the disc moves to the

previous or next chapter or file.

Using the TOOLS Menu

Commercial Discs

During playback, press the TOOLS button.

You can use the Select Scene function during playback to view or start a movie from the scene of your choice.

If the index information in the file is damaged or

✎

the file does not support indexing, you will not be able to use the Select Scene function.

If you are using the DLNA function after

✎

connecting to a computer through your network, Select Scene may not be supported.



Search Titles :

on the disc or device, select to start a different title.

1. Select Search Titles, and then press the

OK button.

2. Use the

then press the



Search Chapters :

your choice.

1. Select Search Chapters, and then press the

2. Use the and then press the

If there is more than one movie

buttons to select a title, and

OK button.

Select to play the chapter of

OK button.

buttons to select a chapter,

OK button.

Playing Content

File-based Video

During playback, press the TOOLS button. Use the

upper right corner, and then press the

Play from the Beginning

Select to return to the beginning of the movie, and then press the

Use 3D menu to select the Side by Side or Bottom

does not appear properly in 3D mode.

Use 3D menu for 3D content only. If you apply

✎

the content, it will not be displayed properly.

buttons to select Settings(T) in the

OK button.

Top

option if the 3D content currently playing

Side by Side

or Top Bottom format to 2D



Search Time bar :

a selected time point.

1. Select Search Time bar, and then press

OK button.

the

Press and hold the 123 button until the Num

pad appears on the screen. When the Num pad appears, select a number using the

button.

You can also

✎

or rewind the movie. The movie advances or rewinds one minute each time you press the

buttons.

Select to play the movie from

button and then press the OK

use the buttons to advance

29 - English

Page 30

Playing Content

Repeat Mode

Lets you repeat a title, chapter, or specific section.

- Off : Select to return to normal playback.

- Title : Choose to repeat a selected title.

- Chapter : Choose to repeat a specific chapter.

- Repeat A-B : Choose to repeat a specific section.

1. Press the want repeat play to start (A).

2. Press the want repeat play to stop (B).

Depending on the disc, the screen may not

✎

display all repeat options. Off, Repeat One, and Repeat All appear only

✎

when you play a video recorded as a digital file. The screen may not display Chapter or

✎

Title immediately. Continue to press the

applicable field. The screen may not display Repeat A-B

✎

immediately. Continue to press the buttons until Repeat A-B is inside the applicable field.

You must set point (B) at least 5 seconds of

✎

playing time after point (A).

Picture Mode

OK button at the point where you

buttons until your choice is inside the

Audio

Select to set the desired audio language.

Audio Sync

In some cases when the product is connected to a digital TV, the audio signal may not synchronize with the video signal. If this occurs, use Audio Sync to adjust the audio delay time to match the video signal.

Subtitle

Lets you set the desired subtitle language.

Subtitle Settings

Lets you set the desired subtitle options.

Angle

To view a scene from another angle. The Angle option displays the number of angles available to view (1/1, 1/2, 1/3, etc.).

BONUSVIEW Video BONUSVIEW Audio

Lets you set the desired Bonusview option.

Rotate

You can rotate the screen clockwise or counterclockwise by 90 degrees.

Lets you set the Picture Mode.

- Dynamic : Increases sharpness and brightness.

- Standard : Choose this setting for most viewing applications.

- Movie : The best setting for watching movies.

- User : Lets you adjust the sharpness and noise reduction function respectively.

When you use the BD Wise function, this

✎

menu will not appear.

Equalizer Mode

Set Equalizer Mode on to use the equalizer.

Equalizer Settings

Lets you set the equalizer.

Equalizer Settings only appears when Equalizer

✎

Mode is On.

Full Screen

Lets you set the size of the video image. Choose

Original, Mode1 (larger), or Mode2 (largest).

Information

Select to view video file information.

Depending on the disc or storage device, the

✎

Tools menu may differ. Video files with high bitrates of 20Mbps or more

✎

strain the product’s capabilities and may stop playing during playback.

30 - English

Page 31

Using the Sort By & Options Menus

Select the Filter( ) function, and then Videos to display videos only.

Even though the product will display folders that

✎

contain all content types, it will only display files of the content type you selected For example, if you selected Videos, you will only be able to see video files.

On the screen that lists the video files, use the

upper right, and then press the

buttons to select Sort By or Options in the

OK button.

Controlling Music Playback

You can control the playback of music content located on a DVD, CD, USB, mobile device, or PC. Depending on the disc or contents, some of the functions described in this manual may not be available.

Buttons on the Remote Control used for Music Playback

Videos

Sort By

Date

Displays all the folders with videos by date. If you select a folder, and then press displays all the video files in the folder by date.

Title

Displays all the video files on the media or storage device by title.

Folder

Displays all the folders on the media or storage device.

Options

Play Selected

Play Selected lets you create a playlist by

selecting specific files to play. It works essentially the same way for all media. See "Using Play Selected with a Commercial CD" on page 34.

Send

Select Send to upload selected files to on-line sites (Picasa, Facebook, etc.) or to devices. To use Send with an on-line site, you need to establish an account with the on-line site, and then log in using the Log In function. Send works essentially the same way for music, photos, and videos. For general instructions, see "Using the Send Function" on page 39.

OK button,

[ ]

buttons : Move to the previous/

next track.

EXIT) button : Stops a track.

(

Fast Play (Audio CD [CD-DA] only)

During playback, press and hold the [ or

]

button. Each time you press and hold the or ] button, the playback speed will change.

button : Plays/Pauses a track.

143

Playing Content

[

Depending on the disc or storage device, the

✎

Options and Sort By menus may differ. All options may not be displayed.

The Sort By and Options menus are usually

✎

available when you are viewing video files on a USB flash drive, a PC, a disc you recorded yourself, or a mobile device. They are usually not available if you are viewing a commercial Blu-ray, DVD, or CD disc.

31 - English

Page 32

Playing Content

Music Screen Controls

TRACK 001 00:43

TRACK 002 03:56

TRACK 003 04:41

TRACK 004 04:02

TRACK 005 03:43

TRACK 001

00:00/00:00

The Track List screen appears initially, and the first track begins to play. If you are playing a commercially recorded disk and don't press a button on the remote momentarily, the Playback screen appears. To return to the Track List screen, press the ' (

TRACK 006 03:40

TRACK 007 04:06

TRACK 008 03:52

TRACK 009 03:04

TRACK 010 04:02

RETURN) button.

On the Music List screen only.

Advance the track.

Repeat one track or all tracks.

Play tracks in random order.

Display the Equalizer.

Equalizer Settings : Adjust the

equalizer manually. (Available only when Equalizer Mode is on)

Play Selected :

lets you select specific files to play. It works essentially the same way for all media. See "Using Play Selected with Self-Recorded Media (CDs, USB Devices, etc.)" on page 34.



Ripping : converts CD audio to the mp3 format and saves the converted files on a USB device or a mobile device connected to the product. See Ripping on page 36.



Information : information.

Play Selected

The Ripping function

Shows the track

TRACK 001

00:00:40 00:03:35

On the Track List screen, use the highlight to the track you want. Press the button to play the track.

buttons to move

On Screen Music Controls

Pause a track.

Play a track.

Move to the previous track.

Move to the next track.

Rewind the track.

To access the controls, play a track, and then use the

choice.

✎

✎ ✎

buttons to move to the control of your

The music screen controls are only accessible when a track is playing.

All controls do not appear at the same time.

For file-based contents, the available Settings

(

) options will differ.

Using the Sort By & Options Menus

Select the Filter( ) function, and then Music to display music files only.

Even though the product will display folders that

✎

contain all content types, it will only display files of the content type you selected For example, if you selected Music, you will only be able to see music files.

On the screen that lists the music files, use the

upper right, and then press the

buttons to select Sort By or Options in the

OK button.

32 - English

Page 33

Music

Sort By

Track

Displays all the music tracks on the media or storage device.

Album

Displays all the music on the media or storage device by album.

Artist

Displays all the music files on the media or storage device by artist.

Genre

Displays all music on the media or storage device by genre.

Folder

Displays all the folders on the media or storage device.

Options

Play Selected

Play Selected lets you select specific files

to play. It works essentially the same way for all media. See "Using Play Selected with a Commercial CD" on page 34 and "Using Play Selected with Self-Recorded Media (CDs, USB Devices, etc.) on page 34.

Send

Encoding

Select to manage the text encoding options.

Rename Playlist

Lets you modify the name of a playlist.

Delete Playlist

Lets you delete a playlist.

Add to Playlist

Lets you add additional files to a playlist.

Repeating Tracks on an Audio CD

You can set the product to repeat tracks on an audio CD (CD-DA/MP3).

1. On the Track List screen during playback, use

the left corner of the screen, and then press the button.

2. Use the want - Off, One Song, or All - and then press

OK button.

the

TRACK 001

00:00:40 00:03:35

Press the ' ( return to the Track List screen.

buttons to select in the lower

to select the Repeat mode you

TRACK 001 00:43

TRACK 002 03:56

TRACK 003 04:41

TRACK 004 04:02

TRACK 005 03:43

TRACK 006 03:40

TRACK 007 04:06

00:00/00:00

TRACK 008 03:52

TRACK 009 03:04

TRACK 010 04:02

Track List screen

TRACK 001

Playback screen

RETURN) button on the remote to

Playing Content

Depending on the disc or storage device, the

✎

Options menu may differ. All options may not be displayed.

Rename Playlist and Delete Playlist appear only

✎

if a playlist exists.

33 - English

Page 34

Playing Content

Shuffling Tracks on an Audio CD

You can set the product to play tracks on an audio CD (CD-DA/MP3) at random.

1. During playback, use the select and then press the

2. Use the and then press the

in the lower left corner of the screen,

OK button.

to set the Shuffle mode Off or On,

OK button.

buttons to

Using Play Selected with a Commercial CD

1. On the Track List screen, select Settings ( ) on

the bottom left, and then press the The Settings menu appears.

2. Select Play Selected, and then press the button. The Play Selected screen appears.

3. Use the press the of the track.

4. Repeat Step 3 to select and check additional tracks.

5. To remove a track from the list, move to the track, and then press the check on the track is removed.

6. When done, select Play on the bottom left, and then press the reappears listing only the tracks you checked. The selected tracks play automatically.

7. To cancel the Play Selected list, select Settings (

On the Settings menu select Play all list. The Track List screen reappears with all tracks on the CD listed.

You can select up to 99 tracks from an Audio CD

✎

(CD-DA) using Play Selected. On the Play Selected screen, you can also

✎

choose Select All, Deselect All, and Cancel.

- Use Select All to select all tracks. This cancels your individual track selections. When you press the ' ( or select Play and then press the all tracks will appear on the Track List screen, and the product will begin to play all tracks from Track 001.

buttons to select a track, and then

OK button. A check appears to the left

OK button again. The

OK button. The Track List screen

) on the bottom left of the Track list screen.

RETURN) button on your remote

OK button.

OK button,

- Use Deselect All to deselect all selected tracks at once. Then, select individual tracks or use

Select All to select all the tracks, and then press

RETURN) button on your remote or

the ' ( select Play and then press the do not use Select All or select individual tracks, the Play Selected list will not change.

- Cancel cancels any changes you made on the Play Selected screen. When you return to the Track List screen, the Play Selected list will be unchanged.

OK button. If you

Using Play Selected with Self-Recorded Media (CDs, USB Devices, etc.)

1. Insert a self-recorded CD or USB device with

self-recorded files into the home theater. The

New device connected. pop-up appears.

2. Select Music, and then press the

on your remote. The File List screen appears displaying icons for tracks, folders, or both.

3. If necessary, use the a folder, and then press the

4. When the tracks you want to play are displayed, select Options in the upper right, and then press

OK button.

the

5. Select Play Selected, and then press the button. Check boxes appear on the upper left sides of the track icons.

6. Use the then press the the check box.

7. Repeat Step 6 to check and select additional tracks.

8. To remove a track from the list, move to the track, and then press the check on the track is removed.

9. When done, select Play, and then press the button. The Track List screen appears listing only the tracks you checked. The selected tracks play automatically.

10. To cancel the Play Selected list, press the

RETURN) button or the

( press ' ( screen. If you press Home screen.

If you want to use Play Selected to watch videos,

✎

use the Filter( instead of Music.

RETURN), you return to the File List

buttons to select a track, and

OK button. A check appears in

OK button again. The

EXIT), you go to the

(

) function to select Videos

OK button

buttons to select

OK button.

(EXIT) button. If you

34 - English

Page 35

Using Play Selected Starting from the Home Screen

Select PLAY DISC or MULTIMEDIA depending

✎

on the media you are using.

- If you selected PLAY DISC, the Track List screen appears. Use the Filter( Music, and then follow the directions starting at

Step 3 above.

- If you selected MULTIMEDIA, select Storage or Network Device on the MULTIMEDIA screen. Then, select your storage media on the Storage screen or device on the Network Device screen. The File List screen appears. Use the

Filter(

follow the directions starting at Step 3 above.

) function to select Music, and then

) function to select

Creating and Editing a Playlist Stored in a Storage Device

Creating a playlist

1. Connect a USB device with stored music to the

home theater's USB jack, and then turn on the home theater.

2. On the Home screen, select MULTIMEDIA, and then press the

3. On the MULTIMEDIA screen, select Storage, and then press the

4. Select the USB device, and then press the button.

5. At the top of the screen, select Filter( Music.

6. After the screen re-displays, select Options (

Add to Playlist.



7. On the next screen, select an existing playlist, and then press the OR Select New Playlist, and then press the button. If you selected an existing playlist, go to Step 9. If you selected New Playlist, go to Step

8. On the on-screen keyboard, accept the default name for the new playlist or enter a new name. When finished, select Done, press go to Step 9.

9. Navigate to the screen that displays the music you want to put into the playlist.

OK button.

) 

OK button.

OK, and then

10. Use the

then press the the check box on the left side of the track icon.

11. Repeat Step 10 to check and select additional tracks.

12. To remove a track from the list, move to the track, and then press the check on the track is removed.

13. When finished, select Add at the top of the screen, and then press the playlist is saved to the USB device and the Added pop-up appears. Press the

buttons to select a track, and

OK button. A check appears in

OK button again. The

OK button. The

OK button.

Playing a playlist

1. Connect the USB device with the playlist to the

home theater's USB port.

2. Navigate to the playlist (Home screen MULTIMEDIA

playlist).

3. Select the playlist, and then press List screen appears and the first track of the playlist starts to play.

Storage  USB device 



OK. The Track

Editing a playlist

1. While playing a playlist, select Settings( )  Edit Playlist at the bottom-left corner of the

Track List screen.

2. Use the then press the appears next to the track.

3. To cancel a selection, select the track again, and then press the

)

To select all tracks at once, use Select All. To

✎

cancel all selections at once, use Deselect All.

4. When finished, select Delete at the bottom left

of the screen, and then press the A confirmation pop-up appears.

5. Select Yes, and then press the

Deleting all files included in a playlist will delete the

✎

playlist itself, too. You can save up to 5 playlists.

✎

buttons to select a track, and

OK button. A check mark

OK button.

Playing Content

35 - English

Page 36

Playing Content

Ripping

1. Insert a USB device into the USB jack on the

front of the product. This is the device you will rip the files to.

2. Put a music CD into the home theater. In a few moments, the Track List screen appears.

3. On the Track List screen, select Settings( the lower left of the screen, and then press the

OK button. The Settings menu appears.

4. Use the

then press the appears.

5. Use the press the of the track.

6. Repeat Step 5 to select and check additional tracks.

To select all tracks at once, select Select All on

✎

the bottom left of the screen, and then press the

OK button.

7. To remove a track from the list, move to the

track, and then press the check on the track is removed.

8. When done, select the Rip button using the buttons, and then press the pop-up appears.

9. Use the store the ripped files to, and then press the button. Ripping begins.

Do not disconnect the device while ripping is in

✎

progress.

10. If you want to cancel ripping after ripping has begun, press the Yes. Select No to continue ripping.

buttons to select Ripping, and

OK button. The Ripping screen

buttons to select a track, and then

OK button. A check appears to the left

OK button again. The

OK button. The Rip

buttons to select the device to

OK button and then select

) on

Using Bluetooth

You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!

What is Bluetooth?

Bluetooth is a technology that enables Bluetoothcompliant devices to interconnect with each other easily using a short, wireless connection.

• A Bluetooth device may hum or malfunction:

- When a part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Home Theater.

- When it is subject to electrical variation from obstructions caused by a wall, corner, or office partitioning.

- When it is exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens, and wireless LANs.

• Pair the Home Theater with the Bluetooth device while the two are close together.

• The further the distance is between the Home Theater and the Bluetooth device, the worse the quality is. If the distance exceeds the Bluetooth operational range, the connection is lost.

• In poor reception areas, the Bluetooth connection may not work properly.

• The Home Theater has an effective reception range of up to 32.8 feet in all directions if there are no obstacles. The connection will be automatically cut off if the device is out of this range. Even within this range, the sound quality may be degraded by obstacles such as walls or doors.

• This wireless device may cause electrical interference. during its operation.

11. When ripping is complete, the "Successfully Ripped." message appears. Press the

button. The Track List screen reappears.

36 - English

Page 37

To connect the Home Theater to a Bluetooth device

Connect

Bluetooth device

Before you begin, confirm that the Bluetooth device supports the Bluetooth compliant stereo headset function.

1. Press the control to display the BT message.

2. Select the Bluetooth menu on the Bluetooth device you want to connect. For instructions, refer to the Bluetooth device's manual.

3. Select the Stereo headset menu on the Bluetooth device.

• You will see a list of devices.

4. Select "

• When the Home Theater is connected to the

Bluetooth device, the device name of the connected Bluetooth device, followed by the name of home theater will appear on the front display of home theater.

5. Play music on the connected device.

• You can listen to the music playing on the

connected Bluetooth device over the Home Theater system.

The Home Theater only supports Middle

✎

Quality SBC data (up to 237kbps@48kHz), and does not support High Quality SBC data (328kbps@44.1kHz).

The AVRCP feature is supported. It's functionality

✎

will differ, depending on the specifications of the connected device.

Connect only to a Bluetooth device that supports

✎

the A2DP Profile. Only one Bluetooth device can be paired at a

✎

time.

SOURCE button on the remote

[HTS]Hxxxxx

" from the searched list.

The search or connection functions may not work

✎

properly in the following cases:

- If there a strong electric field near or around the home theater.

- If several Bluetooth devices are simultaneously paired with product.

- If the Bluetooth device is turned off, not in place, or malfunctions.

- Note that such devices as microwave ovens, wireless LAN adapters, fluorescent lights, and gas stoves use the same frequency range as the Bluetooth device, and can cause electric interference.

For a more reliable connection to a Bluetooth

✎

device or to other devices such as a smart phone, we recommend you update the device's software to the most current version.

To disconnect the Bluetooth device from the Home Theater

You can disconnect the Bluetooth device from the Home Theater. For instructions, refer to the Bluetooth device's manual.

• When the Home Theater is disconnected from the Bluetooth device, the Home Theater will display

DISCONNECTED on the front display.

To disconnect the Home Theater from the Bluetooth device

Press the ( ) button on the front panel of the Home Theater to switch from BT to another mode or turn

off the Home Theater.

• Except when you disconnect the Home Theater by changing functions, the connected Bluetooth device will wait a certain time for a response from the Home Theater before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device.)

In Bluetooth connection mode, the Bluetooth

✎

connection will be lost if the distance between the Home Theater System and the Bluetooth device exceeds 32.8 feet. When the Bluetooth device comes back into effective range or you restart the Bluetooth device, you have to pair the device and home theater again to reconnect.

Playing Content

37 - English

Page 38

Playing Content

In Bluetooth mode, the screen saver will start if

✎

the Bluetooth device stays in the Ready state for 5 minutes. To reconnect the Bluetooth device, turn off the screen saver, and then connect the device. To turn off the screen saver, press any button on the remote control (the Volume button,

Using Bluetooth Power On

When the home theater is turned off, connecting a previously connected smart device to the product via a Bluetooth connection can turn the home theater on.

The home theater must be plugged in for Quick

✎

Start to work. To use this function, set Settings > System >

✎

Quick Start to On. To use this function, the Bluetooth connection

✎

between the Home theater and your smart device must have been established previously, and the Home theater must be on your smart phone's list of known Bluetooth devices.

Connect your previously connected smart device

to the product via Bluetooth. (For information on Bluetooth connections, refer to your smart device’s manual.)

2. Once connected, the home theater turns itself on automatically in BT mode.

• Select the desired music to play on your smart

device.

Playing Photo Contents

You can play photo contents located on a DVD, USB, mobile device, or PC.

Using the Tools Menu

While displaying a photo, press the TOOLS button on the remote.

Select Settings( screen, and then press the

menu drop down list appears.

Slideshow Settings

Speed : Select to set a slide show's speed. Effects : Select to set a slide show's special

effects.

Rotate

Select to rotate the picture. (This will rotate the picture either clockwise or counter clockwise.)

buttons, etc.)

) in the upper right corner of the

OK button. The Tools

Zoom

Select to enlarge the current picture. (Enlarge up to 4 times)

Picture Mode

Dynamic Standard

applications.

Movie : This is the best setting for watching

movies.

User : Lets you adjust the sharpness and noise

reduction function respectively.

Background Music

Select to listen to music while viewing a slide show.

Equalizer Mode

Set to On to use the equalizer. Customize your own personal sound preferences using the equalizer settings.

Equalizer Settings

This function is only available when Equalizer Mode is On.

Send

Information

Displays the picture information.

Depending on the disc or storage device, the

✎

Options menu may differ. All options may not be displayed.

To enable the Background Music function, the

✎

photo file must be in the same storage media as the music file. However, the sound quality can be affected by the bitrate of the MP3 file, the size of the photo, and the encoding method.

You can't enlarge the subtitle and PG graphic in

✎

the full screen mode.

: Choose to increase sharpness.

: Choose for most viewing

38 - English

Page 39

Using the Sort By and Options Menus When the Photo File List is Displayed

Select the Filter( ) function, and then Photos to display photos only.

Even though the product will display folders that

✎

contain all content types, it will only display files of the content type you selected For example, if you selected Photos, you will only be able to see photo files.

On the screen that lists the photo files, use the

upper right, and then press the

Sort By

Options

buttons to select Sort By or Options in the

OK button.

Photos

Date

Groups all the photo files on the media or storage device by date. Click a group to see the photos in that group.

Title

Displays all the photo files on the media or storage device by title.

Folder

Displays all the folders on the media or storage device.

Using the Send Function

1. Use the

press the appears.

2. Use the then press the the left of the picture.

3. Repeat Step 2 to select and check additional pictures.

4. To remove a picture from the list, move to the picture, and then press the The check on the picture is removed.

5. When done, press the Send, and then press the

pop-up appears listing the on-line sites (Picasa, Facebook, etc.) or devices that you can send the photos to.

6. Select a destination, and then press the button.

7. If you are sending the photos to an on-line site, the site starts. Log in and follow the directions on the screen.

To send photos to an on-line site, you must have

✎

an account with that site.

buttons to select Send, and then

OK button. The Selection screen

buttons to select a picture, and

OK button. A check appears to

OK button again.

button to select

OK button. The Send

Listening to the Radio

Playing Content

Slide Show

Starts the slide show. Shows all the files in the current folder, one after another. If you want to create a slide show with a selected group of photos, see Play Selected below.

Play Selected

Play Selected lets you select specific files to

play. It works essentially the same way for all media. See "Using Play Selected with SelfRecorded Media (CDs, USB Devices, etc.)" on page 34.

Send

Depending on the disc or storage device, the

✎

Options menu may differ. All options may not be displayed.

• To listen to the radio, you must connect the supplied FM antenna.

Operating the Radio with the Remote Control

1. Press the SOURCE button to select FM.

2. Tune to the desired station.

• Preset Tuning 1 : Press the

to select PRESET, and then press the buttons to select a preset station.

- Before you can tune to preset stations, you must add preset stations to the product's memory. See Presetting Stations below.

• Manual Tuning : Press the to select MANUAL, and then press the buttons to tune to a lower or higher frequency.

• Automatic Tuning : Press the to select MANUAL, and then press and hold

the band.

buttons to automatically search the

PRESET button

39 - English

Page 40

Playing Content

Setting Mono/Stereo

Press the ST/MO button.

• Each time you press the button, the sound switches between STEREO and MONO.

• In a poor reception area, select MONO for a clear, interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 into memory.

1. Press the

2. Press the

3. Press the

• NUMBER flashes on the display.

4. Press the

• Press the

disappears from the display on its own.

• After you press the NUMBER disappears from the display and the station is stored in memory.

5. To preset another station, repeat steps 2 to 4.

• To tune to a preset station, press the button to select PRESET, and then press the

SOURCE button to select FM.

buttons to select <89.10>.

MEMORY button.

MEMORY button again.

MEMORY button before NUMBER

MEMORY button,

PRESET

buttons to select the preset station.

Using the Special Effects Remote Control Buttons

SOUND EFFECT Function

zPower Bass : Increases the volume level

of bass tones and provides thudding sound effects.

zVirtual 7.1 : Creates a virtual 7.1 CH sound

using the 5.1 CH speaker system.

zOff : Select for normal listening.



Virtual Surround

You can set a two-channel input source to produce sound in 5.1 channel surround mode.



SFE Mode

zSymphony Hall in Boston (Hall 1) : Provides a

clear vocal as if listening in a concert hall.

zPhilharmonic Hall in Bratislava (Hall 2) : Also

provides a clear vocal as if listening in a concert hall, but less powerful than HALL1.

zJazz Club in Seoul B : Recommended setting

for Jazz.

zChurch in Seoul : Gives the feel of being in a

grand church.

zAmphitheater (Rock) : Recommended setting

for Rock.

zOff : Select for normal listening.



Sports

zAnnouncer : Emphasizes the commentator's

voice during a sports game to increase your absorption in the game.

zStadium : Emphasizes spectators' cheering

during a sports game to add immediacy.

zOff : Select for normal listening.

Lets you select a mode that optimizes the sound.

1. Press the

2. Press the

mode: DSP, Virtual Surround, SFE Mode, or Sports.

3. Press the sound effect.



DSP

zMP3 Enhancer : Helps enhance your sound

experience (ex. mp3 music). You can upscale your MP3 level sound (24 kHz, 8bit) to CD level sound (44.1 kHz, 16bit).

SOUND EFFECT button.

buttons to select the desired

DTS Neo:Fusion II / 3D Sound

You can enjoy more natural and vivid surround sound with enriched tones by adjusting the depth of sound using the level options.

• DTS Neo: Fusion II : Off  On

• 3D Sound : Off  High  Low

✎ ✎

40 - English

3D Sound is not available in FM mode.

The 3D Sound is displayed only if you selected Simple Speaker Setup > Simple Mode.

Page 41

Network Services

You can enjoy various network services such as streaming video or on-line apps by connecting the product to your network.

To use network services, you must first:

1. Connect the product to a network. (See page 13)

2. Configure the network settings. (See pages 20~23)

Logging In to Your Samsung Account

Before you access MOVIES & TV SHOWS or SAMSUNG APPS, we suggest you log in to your

Samsung account.

If you do not have a Samsung account, create

✎

one by selecting Create Account.

To create a Samsung account, follow these steps:

1. With the Home screen displayed, press the button. The Sign In screen appears.

2. Select the ID field, and then press the button. The keyboard pop-up appears.

3. Using the keyboard, enter your e-mail address. When finished, select the Done button, and then press the appears.

4. Select the Password field, and then press the

OK button. The keyboard pop-up appears.

5. Using the keyboard, enter your password. When

finished, select the Done button, and then press the

6. To make the log in process easier next time, select Sign me in automatically, and then press the

Select Sign In, and then press the OK button.

8. The Samsung account Terms and Conditions

screen appears.

Select I consent, and then press the OK button.

10. Select an image you want to use to identify your

account, and then press the

11. Select Done.

If you selected Sign me in automatically, the

✎

next time you log in, the product will automatically enter your e-mail and password. All you need to do is select Sign In.

OK button. The Sign In screen re-

OK button. The Sign In screen re-appears.

OK button.

If you press the button after you have logged

✎

in, the Sign In screen appears. You can select Link Accounts, Edit Profile, Remove Account, and Sign Out.

Adding a Credit Card

To add a credit card to your account, follow these steps:

1. Select the Screen, and then press the

Account Sign In screen appears.

2. Sign in to your account if you are not signed in. The Home Screen reappears. If you are already signed in, go to Step 4.

3. Select the button. The Account Sign In screen appears.

4. On the Account Sign In screen, select Edit Profile, and then press the

screen keyboard appears.

5. Enter your account password. When finished, select Done, and then press the

Edit Profile screen appears.

6. Select Add Card, and then press the

The Add Card pop-up appears.

7. Read the Add Card text, and then press the button. The Add Card screen appears.

8. Enter the requested credit card information. When done, select Save, and then press the button.

in the upper right of the Home

OK button. The

again, and then press the OK

OK button. The on-

OK button. The

OK button.

Before Using MOVIES & TV SHOWS or SAMSUNG APPS

If you haven’t set up Smart Hub, when you use MOVIES & TV SHOWS or SAMSUNG APPS for the first time, the product will ask you to perform the Smart Hub set up procedure.

On the Home screen, select either MOVIES & TV

1. SHOWS or SAMSUNG APPS, and then press the

button.

2. If you selected MOVIES & TV SHOWS, the Smart Hub pop-up appears asking if you want to set up Smart Hub. Select Yes, and then press

OK button. The Welcome screen appears.

the

3. Select Start, and then press the The Additional Services and Choices screen appears.

OK button.

Network Services

41 - English

Page 42

Network Services

4. On the Additional Services and Choices screen, you must review and agree to both the Smart Hub Terms and Conditions and the Privacy Policy to use Smart Hub.

5. Scroll down, and then click the View details buttons to review the full documents.

You do not need to consent to the Supplemental

✎

Privacy Notice, but one or more Smart TV features or functionalities may not be available if you do not.

6. Select I agree to all, and then press the button. The Setup Complete screen appears. Press the

OK button.

Using MOVIES & TV SHOWS

Through the MOVIES & TV SHOWS screen, you can stream movies and TV shows and watch them on your TV.

To stream and watch most movies and TV shows, you need a Samsung account with a registered credit card. To register a card, see page 41.

Depending on your country, this menu function

✎

may not be supported.

MOVIES & TV SHOWS

NEWLY ADDED

Featured Movies TV Shows Trailers TrendingFavorites

1. On the Home screen, select MOVIES & TV SHOWS, and then press the

2. Select one of the Recommended Movies or TV

Shows,, and then press the Information screen for that movie appears.

As you highlight each movie or TV show, the icons

✎

for the apps you can use to stream the movie or show appear at the bottom of each movie or show selection icon.

OK button.

OK button. The

-1

. Alternately, select Favorites, Featured, Movies,

TV Shows, Trailers or Trending and then press

OK button.

the On the page that appears, use the

buttons to select a show, movie, or trailer, and then press the

On the Movies or TV Shows screen, you can also select What’s New or Genres to see more available shows or films. On the Genres screen, use the then press the

To make a selection on a page displaying movies or TV shows, use the a selection, and then press the

3. If you have downloaded and installed one of the video streaming apps that you can use to stream the movie or show, select Watch Now, and then press the Follow the directions on the screen to watch the movie or show you have chosen. If you have not downloaded one of the apps, go to Step 4.

4. If you have not downloaded one of the video streaming apps, Watch Via appears on the screen instead of Watch Now. Select one of the video streaming apps to the right of Watch Via, and then press the

5. You will be asked if you want to install the app now. Select Install, press the then follow the directions on the screen to install the app. You can also select View Details to view information about the app. The View Details screen lets you download the app as well.

6. Once the app is installed, select Play, and then

OK to launch the app. Alternately, you can

press press the ' ( MOVIES & TV SHOWS screen, select the show or movie again, and then follow the directions in Step 3 to watch the movie or show.

Contents items and the corresponding bottom

✎

menu in MOVIES & TV SHOWS differ between countries.

OK button.

buttons to select a genre, and

OK button.

OK button. The app launches.

OK Button.

RETURN) button to go back to the

buttons to make

OK button.

OK button, and

42 - English

Page 43

On the each movie or show information screen,

✎

the Watch Now button is displayed only after you have download one of the video streaming apps you can use to stream that particular movie or show. Watch Via appears if you have not downloaded the necessary video streaming app. To the right of Watch Via is a listing of the video streaming apps you can use to stream the movie or show. Select an app icon to download and install the app.

Favorites will not appear unless you have tagged

✎

one or more films or TV shows as a favorite. To tag a movie or show as a favorite, select the show. The Detail screen appears. Select the heart symbol, and then press the

OK button.

Using SAMSUNG APPS

Through the SAMSUNG APPS screen, you can download applications from the Internet, and launch and run downloaded applications on your TV. To access some applications, you need to have a Samsung account.

While playing multimedia content in SAMSUNG

✎

APPS, press and hold 5 button on the remote to pause playback. To stop playback, press and hold e (

EXIT) button on the remote.

The SAMSUNG APPS Screen at a Glance

1 2

SAMSUNG APPS

RECOMMENDED

2233445

MY APPS

WebBrowser

Most Popular What's new Categories

567 9810

RECOMMENDED : Displays recommended contents managed by Samsung. You cannot

delete Recommended Apps.

MY APPS : Displays your personal gallery of applications modifiable on the MY APPS

screen.

Most Popular, What’s new and Categories :

Select to view and download additional apps.

The first time you open the SAMSUNG APPS screen, the Home theater automatically downloads a group of free apps. Once these apps have been downloaded, they appear on the SAMSUNG APPS screen. To see additional apps, select Most Popular, What's new, or Categories on the bottom of the screen, and then press the

Most Popular displays the most popular apps, What's new the newest. Categories displays a

series of icons representing categories such as Videos, Games, and Sports. Select a category icon, and then press the displays the apps in that category.

OK button.

OK button. The Home theater

Downloading an App

1. Select Most Popular, What's new, or Categories, and then press the

If you selected Categories, select a category

icon, and then press the Otherwise, go to Step 3.

On the Most Popular, What's new, and

✎

Categories screens, a green arrow is displayed on apps you have already downloaded.

Select an app you want to download, and then

press the screen for the App appears.

4. Select the Download button on the screen, and then press the to Cancel and the app begins to download.

5. If you want to cancel the download, select Cancel, and then press the

6. When the download is complete, Cancel changes to Play. Select Play, and then press

OK button to start the application.

the Alternately, press the ' ( the SAMSUNG APPS screen reappears. The app you downloaded will be displayed on the App screen under MY APPS.

button. The Detail Information

OK button. Download changes

RETURN) button until

OK button.

button.

OK button.

Starting an Application

1. Select SAMSUNG APPS on the Home screen,

and then press the

2. On the SAMSUNG APPS screen, use the

press the

buttons to select an app, and then

OK button. The app starts.

OK button.

Network Services

43 - English

Page 44

Network Services

The Option Menu

The Option menu lets you add apps to and delete apps from MY APPS. It also lets you change the position of an app in MY APPS and update apps.

Move

1. On the MY APPS screen, select the app you

want to move, and then press the 3 seconds. The Option menu appears.

Select Move, and then press the OK button.

3. Use the

4. When the app is where you want it, press the

OK or

(

EXIT) button.

buttons to move the app.

OK button for

Delete

1. On the MY APPS screen, select the app you

want to delete, and then press the 3 seconds. The Option menu appears.

2. Select Delete, and then press the

3. Use the

press the

buttons to select OK, and then

OK button.

OK button for

button .

Multi Delete

1. On the MY APPS screen, select an app you

want to delete and then press the 3 seconds. The Options menu appears.

2. Select the Multi Delete, and then press the button.

3. Use the want to delete, and then press the

4. Use the . button to select Delete, and then press the

OK button.

buttons to select apps you

OK button for

OK button.

View Detail

1. On the MY APPS screen, select the app you

want to see detailed information for, and then press the menu appears.

2. Select View Detail, and then press the button.

OK button for 3 seconds. The Option

Change View

1. On the MY APPS screen, select an app, and

then press the Option menu appears.

OK button for 3 seconds. The

2. Select Change View, and then press the

button. If the current view is Most Played, you will be asked if you want to change to Custom View. If the current view is Custom View, you will be asked if you want to change the view to Most Played. Most Played sorts the apps by the number of times you ran each app. Custom View lets you arrange the apps to your liking.

3. Select OK, and then press the change the view.

OK button to

Lock/Unlock

Locking an app makes it more difficult to delete accidently.

1. On the MY APPS screen, select the app you want to lock, and then press the seconds. The Option menu appears.

2. Select Lock/Unlock, and then press the button.

3. The PIN input pop-up appears. Enter your PIN. Press and hold the 123 button until the Num pad appears on the screen. When the Num pad appears, select a number using the button and then press the haven't set a PIN, enter the default PIN: 0000.

4. A checkbox appears on each app icon. Use the

lock, and then press the A check mark appears on the icon.

5. Repeat Step 4 to select other apps. Use Select All or Deselect All on the bottom of the screen

to select or deselect all apps at once. To deselect individual apps, select the app again, and then press the disappears.

6. When you have finished marking your selections, move to Lock on the bottom of the screen, and then press the

7. A lock mark appears on the selected app’s icon. You will be prompted to enter the PIN number to delete or unlock a locked app.

button to move to the app you want to

OK button to select it.

OK button. The check mark

button.

OK button for 3

button.

If you

Update Apps

1. On the MY APPS screen, select any app, and

then press the Option menu appears.

2. Select Update Apps, and then press the button.

OK button for 3 seconds. The

44 - English

Page 45

3. The Update Apps screens lists all the apps that have updates available. Select each app you want to update, and then press the You can also choose Select All to update all the apps listed.

4. Select Update, and then press the

OK button.

Screen Mirroring

The Screen Mirroring function lets you view the screen of your smart phone or android tablet on the TV you have connected to the product.

1. In the Home screen, select Screen Mirroring, and then press the

2. Launch AllShare Cast or Screen Mirroring on your device.

3. On your device, find the name of the product in the list of available devices and then select it.

4. The TV displays a connecting message (for example, Connecting to Android_92gb...) and then displays the connected message.

5. In a few moments, the screen of your device appears on the TV screen.

6. To stop Screen Mirroring, press the

RETURN) button on the remote control,

or ' ( or exit the Screen Mirroring function on your smart phone.

You can connect to a device that supports

✎

AllShare Cast. Note that all devices that have AllShare Cast may not be fully supported, depending on the manufacturer. For further information on mobile connection support, refer to the manufacturer’s web site.

When you are using the Screen Mirroring

✎

function, video stuttering or audio dropouts may occur, depending on your environment.

Bluetooth transmissions can interfere with the

✎

Screen Mirroring signal. Before using the Screen Mirroring function, we strongly recommend that

you turn off the Bluetooth function on your smart phone or smart device (tablet, etc.).

OK button.

(

EXIT)

Using the Web Browser

2. On the SAMSUNG APPS screen, select WebBrowser, and then press the

When you run the Web Browser with the product

✎

connected by HDMI to a BD Wise compatible TV

- and BD Wise is on - the browser is maximized to fill the screen and the TV's resolution is set to the optimal resolution automatically.

The Web Browser is not compatible with Java

✎

applications. If you attempt to download a file, and the file

✎

cannot be saved, an error message will appear. E-commerce (purchasing products online) is not

✎

supported. ActiveX is not supported.

✎

Access may be blocked to some websites or to

✎

web browsers operated by certain businesses.

OK button.

Link Browsing and Pointer Browsing

The Web Browser provides two types of browsing, Pointer Browsing and Link Browsing. When you launch the browser for the first time, Pointer Browsing is active. If you are using a mouse to navigate in the Web Browser, we recommend leaving Pointer Browsing active. With Pointer Browsing, you move the pointer using the directional arrow keys on your remote. The pointer moves freely around the screen, much like the pointer on a computer when you use a mouse. With Link Browsing, you use the directional arrow keys to move a highlight from one link, button, or entry field to the next. The highlight is restricted to the links, buttons, and entry fields.

To activate Link Browsing, follow these steps:

1. Use the move the pointer to the Link Browser icon on the top right of the screen. The Link Browser icon is the third icon from the right. The pointer will be in the correct position if the icon turns blue and the words “Link Browsing” appear on the screen.

2. Press the and will remain active whenever you bring up the Web Browser or until you change to Pointer Browsing.

OK button. Link Browsing is activated

buttons on your remote to

Network Services

You can access the Internet using the Web Browser application.

1. Select SAMSUNG APPS on the Home screen and then press the

OK button.

45 - English

Page 46

Network Services

http://www.samsung.com

100%

http://www.samsung.com

The Control Panel at a Glance

The Control Panel, which runs across the top of the screen, has a series of icons which start a number of useful functions. The icons are described below, starting with the icon on the far left of the screen.

http://www.samsung.com

• : Moves to the previous page.

•

: Moves to the next web page. : Displays the Bookmarks and History

•

screen. You can bookmark the current page, select an existing bookmark, and edit and delete bookmarks. You can also view your browsing history and select a page to revisit.

: Moves to the Home screen of the Web

•

Browser.

•

: Lets you enter a page

address manually using the keyboard pop-up.

: Reloads the current page so that it is

•

refreshed on the screen.

•

: Adds the current page to your bookmarks.

•

: Lets you search for information by entering words or characters using the keyboard pop-up. See Using the Keyboard Popup on this page.

•

: Lets you enlarge or shrink the screen

by various percentages.

• /

: Lets you switch between Pointer

Browsing and Link Browsing.

: Lets you configure the Browser’s settings.

•

See Using the Setting Menu on page 47.

: Closes the Web Browser.

•

100%

Using the Keyboard Pop-up

When you click the

or access a data or text entry field,

and then press the

OK button, the keyboard pop-up

appears. To use the keyboard pop-up with your remote, follow

these steps:

http://www.samsung.com

As you enter characters, recommended text will be shown.

Caps 1 2 3 4 5 6 7 8 9 0  Clear q w e r t y u i o p ^ * 

123#& a s

z x c v b n m , . ? -  Cancel

ENG

1. Use the

d f

g h j k l ~

www. .com

buttons on your remote to

/  

move the highlight to a letter or number of your choice.

2. Press the

OK button to enter the letter or

number into the entry field.

3. To access capital letters, move the highlight to the Caps key on the top left, and then press

OK button. Press the OK button again with

the the Caps key highlighted to access small letters again.

4. To access symbols and additional punctuation marks, highlight the 123#& button on the left, and then press the

OK button.

5. To delete a character you entered, move the

highlight to the  button, and then press the button.

6. To delete all the characters you entered, move the highlight to the Clear button, and then press

OK button.

the

7. When finished entering, move the highlight to the Done button, and then press the

If you have a wireless keyboard connected to your

✎

product, you can use the wireless keyboard to enter letters, numbers, symbols, and punctuation. Note that the wireless keyboard will work only when the keyboard popup appears and can only be used to enter letters, numbers, symbols, and punctuation.

, the

100%

@ ! Done



OK button.

46 - English

Page 47

Options on the Keyboard Pop-Up

To access the keyboard pop-up options, highlight the

button on the bottom left of the keyboard, and

then press the

OK button.

Language

Select the language for the keyboard. You can select English, French, Russian, etc.

Enable/Disable Grabbing

Turns the Grabber function on and off. When the Grabber function is on, you can move a web page up and down without dragging the scroll bar. The Grabber function is only available in Pointer Browsing.

Approved Sites

Recommended text

The keyboard suggests recommended words as you enter text. You can turn this function On or

Off.

Reset recommended text data

Reset erases the Samsung Keyboard's memory. Select OK to erase everything that the Samsung Keyboard has learned about your writing style, including any new words you have used.

Predict Next Letter

The keyboard will predict the next letter as you enter letters. The predictions appear in a ring around the letter you have just entered. You can select a predicted letter or move to another letter. You can turn this function On or Off.

Accented Character Preview

Select if you want to type letters with accent marks.

Lets you restrict your children’s access to inappropriate web pages by allowing access only to the web sites you have registered.

Every time you access this function, the PIN screen appears.

Press and hold the 123 button until the Num pad appears on the screen. When the Num pad appears, select a number using the

and then press the

button.

The first time you

button

access this function, enter the default PIN, 0000. You can change the PIN using the Reset password

for the Approved Sites function. See below.

Approved Sites feature : Turns the Approved

Sites function on or off.

Reset password for Approved Sites : Change

the Approved Sites password.

Add current site : Lets you add the currently

displayed web site to the Approved Sites list.

Manage Approved Sites : Lets you key in URLs

to add to the Approved Sites List and delete sites from the Approved Sites list. If you turn this function on and have not added any sites to the Approved Sites list, you will not be able to access any Internet sites.

Network Services

Using the Setting Menu

The Setting menu contains functions that control how the Browser operates and Browser security functions. To open the Setting menu, highlight the the Control Panel, and then press the select an option in the Setting menu, highlight the option, and then press the

http://www.samsung.com

OK button.

icon in

button. To

100%

Enable Grabbing Approved Sites Private Browsing On Set Search Engine Web Browser Setting Help

Private Browsing On/off

Enable or disable the Privacy mode. When the Privacy mode is enabled, the browser does not retain the URLs of sites you visit. If you want to enable Privacy mode, select OK.

If the Privacy mode is running, the “Stop” icon appears in front of the URL at the top of the screen. To disable Privacy mode, select it again when Privacy mode is enabled.

Set Search Engine

You can set the desired Search Engine.

47 - English

Page 48

Network Services

Web Browser Setting

Set as homepage : You can set the Browser's

home page.

Pop-up Block : Turns the Pop-up Block on and

off.

Page Block : You can determine whether to

block advertisements and select the URLs for which advertisements are blocked.

General : You can delete personal information

such as website history and browsing data (cookies, etc.), and reset all web browser settings to their factory defaults. You can also set the Security Mode.

Set the Security Mode to On to avoid

✎

accessing malicious/phishing sites and prevent malicious code from running.

Encoding : You can set the Encoding setting for

web pages to Automatic or select the encoding format manually from a list.

Pointer : You can set the speed of the cursor

when the cursor is set to Pointer Browsing.

Browser Information : Displays the version

number and copyright information for the Web Browser.

Help

Provides basic information about the operation of the Web Browser.

Depending on the web site, some of the Web

✎

Browser Setting functions may not be activated. Functions that are not activated are greyed out and cannot be used.

Linking your Internet Service Accounts to the Product

The Link Accounts function lets you link your product to your accounts with Internet services such as Pandora so that the product can log you in to the service automatically when you start the app for that service.

To create a service account link, follow these steps:

1. On the Home screen, select the the upper right corner, and then press the

button to log in to your Samsung Account.

button in

2. After you have logged in, select the button

again, and then press the

3. Select Link Accounts in the My Account screen, and then press the

4. On the Link Accounts screen, select the service you want to link to the product, and then press

OK button.

the

5. In the ID and Password screen, enter the ID you use to log in to the service you selected using the pop-up keyboard. When finished, select

Done, and then press the

6. Repeat the same process for the password. When finished select Done, and then press the

OK button.

7. Select OK, and then press the

OK button.

BD-LIVE™

Once the product is connected to your network, you can enjoy various movie-related service contents available on BD-LIVE compliant discs.

1. Attach a USB flash memory to the USB jack on the front of the product, and then check its remaining memory. The memory device must have at least 1GB of free space to accommodate the BD-LIVE services.

2. Select Settings on the Home screen, and then press the

3. Select Network, and then press the

4. Select BD-Live Settings, and then press the

OK button.

5. Select BD Data Management, and then press

the

6. Select Select Device, and then press the button.

7. Select USB device, and then press the button.

8. Insert a Blu-ray Disc that supports BD-LIVE.

9. Select an item from the list of BD-LIVE service

contents provided by the disc manufacturer.

The way you use BD-LIVE and the provided

✎

contents may differ, depending on the disc manufacturer.

OK button.

48 - English

Page 49

Appendix

Additional Information

Notes

Connections

HDMI OUT

• Certain HDMI output resolutions may not work,

depending on your TV.

• You must have an HDMI connection to enjoy videos with 3D technology.

• A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.

Settings

3D Settings

• For some 3D discs, to stop a movie during 3D

playback, press the The movie stops and the 3D mode option is deactivated. To change a 3D option selection when you are playing a 3D movie, press the once. The Blu-ray menu appears. Press the

button again, then select 3D Settings in the

EXIT)

(

Blu-ray menu.

• Depending on the content and the position of the picture on your TV screen, you may see vertical black bars on the left side, right side, or both sides.

TV Aspect Ratio

• Depending on the disc type, some aspect ratios

may not be available.

• If you select an aspect ratio and option which is different than the aspect ratio of your TV screen, the picture might appear to be distorted.

• If you select 16:9 Original, your TV may display 4:3 Pillarbox (black bars on the sides of the picture).

BD Wise (Samsung Products only)

• When BD Wise is On, the Resolution setting

automatically defaults to BD Wise and BD Wise appears in the Resolution menu.

• If the product is connected to a device that does not support BD Wise, you cannot use the BD Wise function.

• For proper operation of BD Wise, set the BD Wise option in both the product and the TV to On.

EXIT)

(

button once.

button

EXIT)

(

Digital Output

• Be sure to select the correct Digital Output or you

will hear no sound or just loud noise.

• If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital, DTS), the audio signal outputs as PCM.

• Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.

• Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.

• This Digital Output setup does not affect the analog (L/R) audio or HDMI audio output to your TV. It affects the optical and HDMI audio output when your product is connected to an AV receiver.

• If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital

Output selections (PCM or Bitstream).

• Digital Output can be activated when Sound Output is set to TV Speaker.

BD-Live Internet Connection

• The Internet connection may be restricted while you

are using BD-LIVE contents.

Anynet+ (HDMI-CEC)

• Depending on your TV, certain HDMI output

resolutions may not work. Please refer to the user manual of your TV.

• This function is not available if the HDMI cable does not support CEC.

• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.

BD Data Management

• In the external memory mode, disc playback may

be stopped if you disconnect the USB device in the middle of playback.

• Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported. We recommend you use USB devices that support the USB 2.0 protocol with 4 MB/sec or faster read/ write speeds.

• The Resume Play function may not work after you format the storage device.

• The total memory available to BD Data Management may differ, depending on conditions.

Front Display

• You cannot change the brightness of the

and the VOL +, - button.

button

Appendix

49 - English

Page 50

Appendix

Speaker Settings

• When Sound Output is set to TV Speaker, audio is

produced by the TV speakers.

HDMI audio

• When HDMI audio is output to the TV speakers, it is

automatically down-mixed to 2 channels.

Audio Return Channel

• When Anynet+ (HDMI-CEC) is Off, the Audio Return Channel function is not available.

• Using an HDMI cable not certified for ARC (Audio

Return Channel) may cause a compatibility problem.

• The ARC function is only available if an ARCcompliant TV is connected.

Playback

Playing Video files

• Video files with high bitrates of 20Mbps or more

strain the product’s capabilities and may stop playing during playback.

Selecting the Audio Language

• The ◄► indicator will not appear on the screen

if the BONUSVIEW section does not contain any BONUSVIEW audio settings.

• The languages available through the Audio Language function depend on the languages that are encoded on the disc. This function or certain languages may not be available.

• Some Blu-ray Discs may allow you to select either the PCM or Dolby Digital audio English soundtrack.

Selecting the Subtitle Language

• Depending on the Blu-ray Disc/DVD, you may be

able to change the subtitle language in the Disc Menu. Press the

• This function depends on the selection of subtitles that are encoded on the disc and may not be available on all Blu-ray Discs/DVDs.

• Information about the main feature BONUSVIEW mode will also appear if the Blu-ray Disc has a BONUSVIEW section.

• This function changes both the primary and secondary subtitles at the same time.

• The total number of primary and secondary subtitles, respectively, is displayed.

DISC MENU button.

Playing JPEG files

• You can’t enlarge the subtitle and PG graphics in

the full screen mode.

Playing Content

Using the pictures

• If the home theater is connected to a BD Wise

compliant TV that has BD Wise On, the Picture Settings menu will not appear.

• The Background Music function will not work unless the music file and the photo file are located on the same storage media. Also, sound quality can be impacted by the bitrate of the MP3 music file, the size of the photos, and the encoding method.

TOOLS button while playing back

Disk and Format Compatibility

Disc types and content your Product can Play

Media Disc Type Details

BD-ROM or BD-RE/-R disc recorded in the BDRE format.

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/ DVD-R/+R discs that have been recorded and finalized, or a USB storage media containing MKV, MP4 contents.

Music recorded on CDRW/-R, DVD-RW/-R, BDRE/-R discs or a USB storage media containing MP3 or WMA contents.

Photos recorded on CDRW/-R, DVD-RW/-R, BDRE/-R discs or a USB storage media containing JPEG contents.

VIDEO

MUSIC

PHOTO

Blu-ray Disc

3D Blu-ray Disc

DVD-VIDEO,

DVD-RW,

DVD-R,

DVD+RW,

DVD+R

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

50 - English

Page 51

The product may not play certain CD-RW/-R and

✎

DVD-R because of the disc type or recording conditions.

If a DVD-RW/-R disc has not been recorded properly

✎

in DVD video format, it will not be playable. Your product will not play content that has been

✎

recorded on a DVD-R at a bitrate that exceeds 10 Mbps.

Your product will not play content that has been

✎

recorded on a BD-R or USB device at a bitrate that exceeds 30 Mbps.

Playback may not work for some types of discs, or

✎

when you use specific operations, such as angle change and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.

When you play a BD-J title, loading may take longer than

✎

a normal title or some functions may perform slowly.

Disc Types your Product cannot Play

Logos of Discs the Product can Play

Blu-ray Disc 3D Blu-ray Disc

BD-LIVE Dolby

DTS

• HD DVD

• DVD-ROM/PD/MV-Disc,

etc

• DVD-RW(VR mode)

• CVD/CD-ROM/CDV/

CD-G/CD-I/LD (CD-Gs play audio only, not graphics.)

This product may not respond to all operating

✎

commands because some Blu-ray Disc, DVD, and CD discs allow specific or limited operation and provide only certain features during playback. Please note that this is not a defect in the product.

Samsung cannot guarantee that this product will

✎

play every disc bearing the Blu-ray Disc, DVD, or CD logo because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the manufacture of discs.

Please contact the SAMSUNG Customer Care

✎

Center at 1-800-726-7864 if you have questions or encounter difficulty when playing Blu-ray Discs, DVD, or CD discs in this product. Also, refer to the rest of this user manual for additional information on playback restrictions.

Some commercial discs and DVD discs purchased

✎

outside your region may not play on this product.

• DVD-RAM

• Super Audio CD

(except CD layer)

• 3.9 GB DVD-R Disc for Authoring.

NTSC broadcast system

Java

in U.S.A, Canada, Korea,

Japan

Region Code

Both products and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Number for this product is displayed on the rear panel of the product.

Disc

Type

Blu-ray

Disc

Region

Code

Area

North America, Central America,

South America, Korea, Japan, Taiwan, Hong Kong and South

East Asia.

Europe, Greenland, French

territories, Middle East, Africa,

Australia and New Zealand.

India, China, Russia, Central

and South Asia.

Appendix

51 - English

Page 52

Appendix

The U.S., U.S. territories and

Europe, Japan, the Middle East,

Egypt, Africa, Greenland

Taiwan, Korea, the Philippines,

DVD-

VIDEO

Mexico, South America,

Central America, Australia,

New Zealand, Pacific Islands,

Russia, Eastern Europe, India,

If the Region number of a Blu-ray Disc/DVD does

✎

not correspond to the Region number of this product, the product cannot play the disc.

AVCHD (Advanced Video Codec High Definition)

• This product can play back AVCHD format discs.

These discs are normally recorded and used in camcorders.

• The AVCHD format is a high definition digital video camera format.

• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing format.

• Some AVCHD discs use the “x.v.Color” format. This product can play back AVCHD discs that use the “x.v.Color” format.

• “x.v.Color” is a trademark of Sony Corporation.

• “AVCHD” and the AVCHD logo are trademarks of

Matsushita Electronic Industrial Co., Ltd. and Sony Corporation.

Some AVCHD format discs may not play, depending

✎

on the recording conditions. AVCHD format discs need to be finalized.

✎

Canada

Indonesia, Hong Kong

Caribbean

North Korea, Mongolia

China

“x.v.Color” offers a wider color range than normal DVD

✎

camcorder discs. Some MKV and MP4 format discs may not play,

✎

depending on their video resolution and frame rate.

Supported Formats

Notes on the USB connection

• Your product supports USB storage media, MP3

players, digital cameras, and USB card readers.

• The product does not support folder or file names longer than 128 characters.

• Some USB/digital camera devices may not be compatible with the product.

• Your product supports the FAT 16, FAT 32, and NTFS file systems.

• Connect USB devices directly to the product’s USB port. Connecting through a USB cable may cause compatibility problems.

• Inserting more than one memory device into a multi-card reader may cause the reader to operate improperly.

• The product does not support the PTP (Peer to Peer) protocol.

• Do not disconnect a USB device while it is transferring or recording data.

• The bigger the image resolution, the longer the image takes to display.

• This product cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial sites.

• Your product only supports video that is under 30fps (frame rate).

• Your product only supports USB Mass Storage Class (MSC) devices such as thumb drives and USB HDD. (HUB is not supported.)

• Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible with this product.

• If some USB devices require excessive power, they may be limited by the circuit safety device.

• If playback from a USB HDD is unstable, provide additional power by plugging the HDD into a wall socket. If the problem continues, contact the USB HDD manufacturer.

• SAMSUNG is not responsible for any data file damage or data loss.

52 - English

Page 53

Video File Support

File

Extension

*.avi

*.mkv

*.asf *.wmv *.mp4

*.mov *.3gp

*.vro *.mpg

*.mpeg

*.ts

*.tp

*.trp

*.mov

*.flv

*.vob

*.svi

*.m2ts

*.mts

*.divx

*.ps

*.webm

*.rmvb

Container Video Codec Resolution

MVC

Motion JPEG

H.264 BP/MP/HP

AVI

MKV

ASF

MP4

3GP

MOV

FLV VRO VOB

SVAF

WebM VP8 1920x1080

RMVB RV8/9/10 (RV30/40) 1920x1080

Divx 3.11 / 4 / 5 / 6

MPEG4 SP/ASP

Window Media Video

v9(VC1)

AVS

MPEG2

MPEG1

Microsoft MPEG-4 v3

Window Media Video

v7(WMV1), v8(WMV2)

H 263 Sorrenson

Microsoft MPEG-4 v1, v2

VP6 640x480

1920x1080

1280x720

720x576

Frame rate

(fps)

24/25/30 60

FHD :

MAX 30

HD :

MAX 60

MAX 30

6~30 4

6~30 20 Vorbis

6~30 20 RealAudio 6

Bitrate (Mbps)

Audio Codec

AC3

LPCM

ADPCM

(IMA, MS)

AAC

HE-AAC

WMA

DD+

MPEG(MP3)

DTS0

(Core, LBR)

Appendix

Limitations

- Files are not supported if there are some issues with contents among the supported codecs listed above.

- Normal playback is not guaranteed if the file's container information is wrong or the file itself is corrupted.

- Sound or video play may cutoff for contents with bitrate/frame rates that are above standard.

- The seek (skip) function is not available if the file's index table is damaged.

- Depending on your network status, play may become disrupted when playing contents from the network.

- Some USB/Digital camera devices may not be compatible with the product.

- RMVB format is supported in China and Hong Kong only

- AVS codec is supported for contents for China only

- *.ps extension is supported for contents for China only

- DivX codec is not supported for contents in the US

Video decoder

- Supports up to H.264 Level 4.1 (except for FMO/ASO/ RS)

- Does not support VC1 AP L4

- Except for WMV v7, v8, MSMPEG4 v3, MVC, VP6 Below 1280 X 720: 60 frame max Above 1280 X 720: 30 frame max

- Does not support GMC 2 or higher

- Supports SVAF Top/Bottom, Side by Side, Left/Right view sequence type(2 ES) Only

- Supports BD MVC Spec Only

Audio decoder

- Supports WMA 10 Pro (Up to 5.1)

- Does not support WMA lossless audio.

- Supports M2 profile

- ReadlAudio 10 lossless is not supported for contents for China and Hong Kong

- Does not support QCELP, AMR NB/WB

- vorbis : Supported up to 5.1 channel

- DD+ : Supported up to 7.1ch

- DTS LBR codec is supported in MKV/MP4/TS containers only

53 - English

Page 54

Appendix

Music File Support

File Extension Type Codec Comments

*.mp3

*.m4a

*.mpa

*.aac

*.flac

*.ogg

*.wma

*.wav

*.mid

*.midi

*.ape

*.aif

*.aiff

*.m4a

MPEG

MPEG4

FLAC

OGG

WMA

wav

midi

ape

AIFF

ALAC

MPEG1 Audio Layer 3 -

AAC -

FLAC Supports up to 2ch

Vorbis Supports up to 2ch

Supports WMA 10 Pro (Up to 5.1) Does

WMA

wav -

midi

ape NonSmart not supported

AIFF -

ALAC -

not support WMA lossless audio

Supports up to M2 profile

type 0 and type 1

Seek not supported

Supported on USB only

Picture File Support

File Extension Type Resolution Comments

*.jpg

*.jpeg

*.png

*.bmp

*.mpo

JPEG

PNG

BMP

MPO

15360x8640 -

4096x4096 -

15360x8640 -

54 - English

Page 55

Digital Output Selections

Setup PCM

Connection HDMI supported AV receiver

PCM Up to PCM 7.1ch PCM

Dolby Digital Up to PCM 5.1ch Dolby Digital

Dolby Digital

Plus

Dolby

Audio

Stream on

Blu-ray Disc

Audio

Stream on

DVD

TrueHD

DTS DTS

DTS-

HD High

Resolution

Audio

DTS-HD

Master

Audio

PCM PCM 2ch

Dolby Digital Up to PCM 5.1ch Dolby Digital

DTS Up to PCM 7.1ch DTS

Up to PCM 7.1ch

Bitstream

(Unprocessed)

Dolby Digital Plus

Dolby TrueHD

DTS-HD High

Resolution Audio

DTS-HD Master

Audio

Bitstream

(Re-encoded DTS)

DTS re-encoded

Bitstream

(Re-encoded

Dolby D)

Re-encoded

Dolby Digital *

Appendix

Outputs only the

Decodes the main

feature audio and

Definition for

Blu-ray Disc

If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be PCM 2ch.

Blu-ray Discs may include three audio streams :

- Main Feature Audio : The audio soundtrack of the main feature.

- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.

- Navigation Sound Effects : When you choose some menu navigation options, Navigation Sound Effects may sound. Navigation Sound Effects are different on each Blu-ray Disc.

Any

BONUSVIEW audio

stream together

into PCM audio and

adds Navigation

Sound Effects.

main feature audio

stream so that your

AV receiver can

decode the audio

bitstream.

You will not hear

BONUSVIEW audio

or Navigation Sound

Effects.

Decodes the main

feature audio and

BONUSVIEW audio

stream together

into PCM audio and

adds Navigation

Sound Effects, then

re-encodes the

PCM audio into DTS

bitstream.

Decodes the main

feature audio and

BONUSVIEW audio

stream together

into PCM audio and

adds Navigation

Sound Effects, then

re-encodes the PCM

audio into Dolby

Digital bitstream or

PCM.

55 - English

Page 56

Appendix

Resolution according to the output mode

Blu-ray Disc/E-contents/Digital Contents playback DVD playback

Output

Setup

BD Wise

Auto Max. Resolution of TV input Max. Resolution of TV input

1080p@60F 1080p@60F 1080p@60F

Movie Frame : Auto (24Fs) 1080p@24F -

1080i 1080i 1080i

720p 720p 720p

480p 480p 480p

If the TV you connected to the product does not support Movie Frame or the resolution you selected, the message

✎

"If no pictures are shown after selecting 'Yes', please wait for 15 seconds to return to the previous resolution. Do you want to change the resolution?" appears. If you select Yes, the TV's screen will go to blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.

If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold the

✎

button on the top of the product for more than 5 seconds. All settings are restored to the factory default. Run the Initial Settings procedure again. Then, go to Settings > Picture > Resolution in the Menu, and select the correct resolution for your TV.

When you run the Initial Settings procedure, re-select the language and aspect ratio (screen size and format) only.

✎

Resetting does not affect your network settings, so you should be able to skip Network Setup and Software Update. When the factory default settings are restored, all stored user BD data will be deleted.

✎

The Blu-ray Disc must have the 24 frame feature for the product to use the Movie Frame (24Fs) mode.

✎

Blu-ray Disc

Resolution of Blu-ray

Disc

HDMI Mode

Digital contents

E-contents/

1080p@60F 480i

HDMI Mode

56 - English

Page 57

Troubleshooting

Refer to the table below when this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG.

Symptom Check/Remedy

You cannot eject the disc.

Playback does not start.

Playback does not start immediately when you

press the p button.

No sound.

You can only hear sound from a few speakers, but not all 6.

Dolby Digital 5.1 CH Surround Sound is not produced.

• Is the power cord plugged securely into the outlet?

• Turn off the power, and then turn it back on.

• Check the region number of the Blu-ray/DVD disc.

Blu-ray/DVD disc purchased from abroad may not be playable.

• CD-ROMs and DVD-ROMs cannot be played on this product.

• Make sure that the rating level is correct.

• Are you using a deformed disc or a disc with scratches on the surface?

• Wipe the disc clean.

• The home theater does not play sound during fast playback, slow playback, and

step motion playback.

• Are the speakers connected properly? Is the speaker setup correctly customized?

• Is the disc severely damaged?

• On certain Blu-ray/DVD discs, sound is output from the front speakers only.

• Check if the speakers are connected properly.

• Adjust the volume.

• When playing audio from a CD, the radio, or a TV, the unit outputs sound to the

front speakers only.

• Is there "Dolby Digital 5.1 CH" marked on the disc? Dolby Digital 5.1 CH Surround Sound is produced only if the disc is recorded with 5.1 channel sound.

• Is the audio language correctly set to Dolby Digital 5.1-CH in the information display?

Appendix

The remote control does not work.

• The disc is rotating but there is no picture.

• Picture quality is poor and the picture is shaking.

Audio language and subtitles do not work.

• Are you operating the remote within its operational range and within the proper angle relative to the sensor?

• Are the batteries drained?

• Is the TV power on?

• Are the video cables connected properly?

• Is the disc dirty or damaged?

• A poorly manufactured disc may not be playable.

• The Audio Language and subtitle functions will not work if the disc does not

contain them.

57 - English

Page 58

Appendix

Symptom Check/Remedy

The menu screen does not appear even when you select the menu function.

The aspect ratio cannot be changed.

• The product is not working. (Example: The power goes off or you hear a strange noise.)

• The Product is not working normally.

You have forgotten the rating level password.

Can't receive radio broadcasts.

While listening to TV audio through the product, there is no sound.

• Are you using a disc that does not contain menus?

• You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or 4:3

Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 mode only. Refer to the Blu-ray Disc jacket, and then select the appropriate function.

• Press and hold the remote control's mode. This will reset the unit.

- Using the RESET function will erase all stored settings. Do not use this function unless necessary.

• With no disc in the product, press and hold the product's @ button for longer than 5 seconds. INIT appears on the display and all settings will return to their default values.

- Using the RESET function will erase all stored settings. Do not use this function unless necessary.

• Is the antenna connected properly?

• If the antenna's input signal is weak, install an external FM antenna in an area with

good reception.

• If you press the OPEN/CLOSE ^ button while listening to TV audio using the D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV audio is muted.

(

EXIT) button for 5 seconds in STANDBY

"Not Available" appears on screen.

If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV.

No HDMI output.

Abnormal HDMI output appears on the screen.

• The features or action cannot be completed at this time because:

1. The Blu-ray/DVD disc's software restricts it.

2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)

3. The feature is not available at the moment.

4. You’ve requested a title or chapter number or search time that is out of range.

• Press and hold the @ button on front panel for more than 5 seconds with no disc in the product. All settings will revert to their factory settings.

• Check the connection between the TV and the HDMI jack of the product.

• Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution.

• If random noise appears on the screen, it means that TV does not support HDCP

(High-bandwidth Digital Content Protection).

58 - English

Page 59

Symptom Check/Remedy

AllShare function

You can see folders shared through AllShare, but cannot see the files.

Video plays intermittently.

The AllShare connection between the product and PC is unstable.

BD-LIVE

The home theater cannot connect to the BD-LIVE server.

• AllShare only shows Video, Photo, and Music files. Other types of files are not

displayed.

• Check if the network is stable.

• Check if the network cable is properly connected and if the network is overloaded.

• The wireless connection between the DLNA compatible device and the product is

unstable. Check the connection.

• IP addresses under the same subnetwork should be unique, otherwise IP collision can results in such a phenomenon.

• Check if you have a firewall enabled. If so, disable the firewall function.

• Test whether the network connection is active by using the Network Status function.

• Check whether a USB memory device is connected to the product.

• The memory device must have at least 1GB of free space to accommodate the

BD-LIVE service. You can check the available size in BD Data Management. (See page 49)

• See if the BD-Live Internet Connection option is set to Allow(All).

• If all above fails, contact the contents provider or update to the latest firmware.

Appendix

When using the BD-LIVE service, an error occurs.

When the factory default settings are restored, all stored user BD data is deleted.

✎

• The USB memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. (See page 49)

59 - English

Page 60

Appendix

Specifications

Weight 5.1 Ibs

Dimensions 16.9 (W) x 2.2 (H) x 9.9 (D) inches

General

Operating Temperature Range +41°F to +95°F

Operating Humidity Range 10 % to 75 %

Signal/noise ratio 55 dB

FM Tuner

HDMI

Amplifier

Usable sensitivity 12 dB

Total harmonic distortion 0.5 %

Video 1080p, 1080i, 720p, 480p

Audio PCM multichannel audio, Bitstream audio, PCM audio

Front speaker output 165W x 2 (3)

Center speaker output 170W (3)

Surround speaker output 165W x 2 (3)

Subwoofer speaker output 170W (3)

Analog input : 20Hz~20kHz (±3dB)

Frequency response

Digital input : 20Hz~40kHz (±4dB)

S/N Ratio 70dB

Channel separation 60dB

Input sensitivity (AUX) 500mV

60 - English

Page 61

HT-H6500WM

Speaker

system

Front

Surround 3.7 x 5.9 x 4.0 1.41

Center

Subwoofer

Speaker

system

Front

Surround 3.7 x 5.9 x 4.0 1.41

Center

Subwoofer

• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.

• Weight and dimensions are approximate.

• Design and specifications are subject to change without prior notice.

• For the power supply and Power Consumption, refer to the label attached to the product.

Impedance

3 

Impedance

3 

Frequency

range

140Hz~

20kHz

40Hz ~

160Hz

Frequency

range

140Hz~

20kHz

40Hz ~

160Hz

Output sound pressure level

87dB/W/M

88dB/W/M 6.6 x 13.8 x 11.4 7.52

Output sound pressure level

87dB/W/M

88dB/W/M 6.6 x 13.8 x 11.4 7.52

Rated

input

165W 330W

170W 340W

HT-H6530WM

Rated

input

165W 330W

170W 340W

Maximum

input

3.7 x 45.3 x 4.0 (Stand base:

Dimensions

(W x H x D) (inches)

3.7 x 11.0 x 4.0 3.85

12.6 x 3.2 x 4.0 2.25

Dimensions

(W x H x D) (inches)

10.8 x 0.9 x 10.4)

12.6 x 3.2 x 4.0 2.25

Weights

10.36

(Ibs)

Appendix



SWA-6000

Weight 2.52 lbs

Dimensions (W x H x D) inches 3.0 x 9.0 x 6.0

Operating Temperature Range +41°F to +95°F

Operating Humidity Range 10% ~ 75%

Output 165W x 2 CH

Frequency range 20Hz~20KHz

S/N Ratio 65dB

61 - English

Page 62

Appendix

Licenses

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the

Symbol, DTS and the Symbol together, & DTS-HD and the Symbol together are registered trademarks of DTS, Inc. DTS-HD Master Audio | Essential and DTS Neo:Fusion II are trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association.

This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http:// www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA." This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 20042010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.

- Open Source License Notice In the case of using open source software, Open Source Licenses are available on the product menu.

62 - English

Page 63

LIMITED WARRANTY TO ORIGINAL PURCHASER

Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship.

SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option.

All warranty repairs must be performed by a SECA Authorized Service Center. (The name and address of the location nearest you can be obtained by calling toll free: 1- 800- SAMSUNG)

LABOR

One year (Carry- in)

On carry-in models, transportation to and from the service center is the customer’s responsibility.

The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. It must be presented to the authorized service center at the time service is requested.

PARTS

One year

EXCLUSIONS (WHAT IS NOT COVERED)

This warranty does not cover damage due to accident, fire, flood and/ or other acts of God; misuse, incorrect line voltage, improper installation, improper or unauthorized repairs, commercial use or damage that occurs in shipping. Exterior and interior finish, lamps, glass are not covered under this warranty. Customer adjustments which are explained in the instruction manual are not covered under the terms of this warranty. This warranty will automatically be voided for any unit found with a missing or altered serial number. This warranty is valid only on products purchased and used in Canada.

HEADQUARTERS

SAMSUNG ELECTRONICS CANADA INC.,

CUSTOMER SERVICE

55 STANDISH COURT MISSISSAUGA, ONTARIO L5R 4B2 CANADA

FABRIQUE EN CORÉE

1-800-SAMSUNG (1-800-7267864)

WWW.SAMSUNG.COM/CA

Page 64

QUESTIONS

COMMENTS?

COUNTRY

THE

2014

Samsung

CALL

1-800-SAMSUNG

(726-7864)

Electronics

Co.,

Ltd.

VISIT

www

All

msu ng.

support

rights

ONLINE

com/us/

reserved.

Samsung Electronics

Challenger

WRITE

America,

Road Ridgefield

07660

Inc.

Park,

lllllllllllllllllllllllllllllllllllllllllll

AH68-02684A-OO

Page 65

This

Nanum

Gothic

Eco

font

provided

NAVER.

1111

11111

AH68-026748-00

111111

1111

111

Check

Accessories

for the

liflJ

supplied

000000

Main Unit

(For

Power

Toroidal

(3301-000144)

Ferrite

accessones

Installing

cord)

Core

and

------

below.

Soft

(BN63-02368B)

Power

(3903-000598)

connecting

Cloth

Cable

the

User

Manual

(AH68-02

(AH42-00021

speakers

684A)

Antenna

= =

(!.)

-£i

.:.

......

....

EID

CI!:.D

.!,

.£.!.

Remote

(AH59-02630A)/

Lithium (430

Control

Battery

1-001

042)

eaker

Front

Com

x 2

Connectin

Make

Attach the

module's

and

two

then

•

Attach the ferrite

Module

onents

Surround

the

Toroidal

loops

Toroidal power close

possible

the power

fernte

cord

pressing

x 2

Ferrite

shown

core

Center

Speaker

Core

cord.

to the

the

unt1l

to the

Cable

wireless

figure

clicks.

Wireless

x 6

receiver

the right,

Rece1ver

Subwoofer

Wireless

(SWA-6000)

Receiver

Module

English

Wireless

Receiver

Module

Page 66

Connecting

The

speakers,

speaker

must

jacks

match

are

the

speakers

speaker

color

cables,

coded

and

Speaker

Placement

Match correct home then

insert the

each

speaker

theater

jack

main

plug.

cable

unit

the

p,ug

back

color,

the

of the

and

Surround

receiver

The illustrations

Each

Each the then connect the

speakers

module.

appearance

speaker cable

has

band

this

has

each

must your

guide.

colored

single

cable

connected

speakers

label

colored

the

speaker

to the

speaker.

may

band

differ

its

near

Front

the

back

1ts

label

(R)

wireless

from

the

underside.

end.

Match

color,

and

Speaker

Cable

. - -

Connections

. M.:

...

I I I

Back

of the

Match polarity .

speakers

English

Page 67

3 Connecting the Main

(

)

Unit

~-~

Connecting

Connect HDMIIN home

HDMI

jack

theater with

Connectin

ethod 1 AUX

Using

RCA

jack

the external

•

sure

ethod 2 OPTICAL : Connecting

Use

to connect the digital Recetvers Optical us1ng

(Set-

Digital Audio

a digital optical

External

Devices

to a TV

your

audto

match

Top-Boxes)

-----------------------

cable

(not

TV.

only

this

External

IN : Connecting

cable

analog

the

colors

jack

cable Q Select

@ ®

AUDIO

supplied)

the

cable

Devices

(not

suppl1ed),

component Q

audto

to the

the product to the

OUT

frorr the

supports

connected.

External

the

cable

output of

home

theater.

the

OPTICAL

OUT

HDMI

ARC,

you

Analog

connect the

Select

plugs

External

dtgttal

the

to the

Digital

stgnal

Ustng

D1g1tal

mode

HDMIOUT

OUT

jack

the

can

hear

the audio from your

Component

AUDIO

AUX

colors

a digital optical

jack

mode

the

Audio

components

Optical Out

Component

back

the product to the

input

and

output

such

Cable

cable

(not supplied), connect the

jack

of the external

HDMIIN

through the

jacks

Boxes

and dtgttal

AUDIO

Satelltte

device

Out

ethod 3 HD

Connect OUT

jack

Selecting

select

the button, the

MIIN :

HDMI

external

cable

your dtgital

External

mode

Connecting

(not

supp

device Q Select

Device

device

after

changes

External

ted)

from

the

Use

--------------------

you

have

connected

this order : 80/DVD

English

Component

DMI1N

MI rlode

tt,

press

.....

jack

the

SOURCE

.....

AUX

with

back

..... HDMI

an HOM I

of the product to the

button

.....

Each

Cable

t,me

.....

f-lDrvll

you

press

Page 68

Lf.

You

can

Network

connect your product to

Connections

your

network router

--~-

us1ng

----==

one

the

methods

illustrated below.

Wireless

Connect the

main Plug and module.

Network

_.J

- m

Insert

((

Using

the power

unit.

the

wireless

----

cable

main

unit

receiver

Win!d

Network

[

-----~

batteries

into

tlhe

remote

=====

control.

Turn

the

TV.

Turn

the

with

TV's

remote

setup,

ratio), your

and

TV.

name

the control.

the initial

network configuration,

(aspect ratio the network's

you

define

HDTVs

(SSID)

set

the

agree

the

have

and

Use a c01n the cover to shown above.

Turn

Press front Power control.

language

terms

speaker

aspect

password.

turn

remote

remove

Power

panel

<!,)

layout.

control

anti-clockwise

the

figure

the

home

()

press

the

home

and

conditions,

Before

ratio of 16:9. If

theater.

the

remote

theater

you

Insert a 3V

battery. (+)pole

inserting the align by figure

battery

the

side

above.

Keep

upward

the

'8'

displays,

set

the

home

begin,

you

make

have a wireless

lithium

the

positive

when

battery.

cover

marks

side

shown

the

Configure

When theater set instructions perform

you

for

screens

set

the

theater's

sure

Use a coin

the

cover

far

Put

and

the

home

you

network,

fix

the

initial

turn

the

f1rst

appear.

init1al

output resolution

know the

settings.

the

t1me,

the

screens

set

theater's

you'll

clockwise

will

place

home

the

up.

aspect

need

turn

init1al

the

Englislil

Page 69

IMPORTANT:

Player Update Information

new

movie titles are released, they may contain enhanced features or software that

not yet compatible with this player. Should

you

experience playback issues with a disc, a software upgrade may resolve

it.

To enhance this unit's Blu-ray playback capabilities and to

enjoy

all

the latest features that Blu-ray has to offer, you should ensure that your player's running the latest software.

A quick update can make a huge difference.

Visit the product registration center at

www.samsung.com

to register your player and receive e-mail notifications whenever a

software update

available.

How do

check the software version

my player?

Through the player's menu, go to Settings>

Support> Contact Samsung.

Then,

look

for the software version under Product

Information.

How do

I update the software?

USB:

Download the latest software from www.samsung.com/support.

Unzip the zip archive to your computer.

You

should have a single folder or file with the same name as the zip

file.

Copy the folder or

file

to a USB flash drive.

Insert

the

USB

flash drive into the

USB

port of the player.

Go to

Settings>

Support>

Software

Update>

Update now or By

USB

(depending on your model).

Please refer to

Owner's

manual for more details and other ways to update your

player.

111111111111111111111111111111111~

Ill

AK68-0

1811

S-03

Page 70

f--

-------

~-;a;-~-~~-~

~w -

:---------

;,i~-.;e-t

""t;

t.19.;91is~

;;;;i;.

-.;; ~~;

;i ;

~~;

~~~-..-

1 A

~:!§

~21

~.X

.Xi~

~~IL,.tQ.

tt1£AI

: A

while

matalbltlon

. :

~---~~

S!!?7

Ol§a-tof

H4~e.~~-!1

....

Makesuretobrushofflhedlrtorut~proo.idedc!othbeforedearnngdleablnetFor~ttle:

"'"*~!19QL

XUlC">

~~o

,,,l

~-1"11..YI.71

lr-L

frontcablnet.make~)'OUIJSeonlytnep10Yicl;ddothonwhichtDsp!ll'fwatef4!Q6tJme5be-

~aOf

..:.:'-'

...,

.!_-r""'~at.....

:,;..:

~ ·c:n~~-r-

.V.."liiil'-1'-f.

English

furewlplnqitCXJ:softlyllonedlrtctlon.Afnordwllng,wlpetheCllbinectoremave-anymoisturf.:

J.f

~XI.il

•

.lHUI~.ll2

Only

use

water

cleansing

solution

. ,

~-----------

- --------------------------

- -

----

--------------·-------------

----------------------------------------------·

Ce proctult

est

reeouvert

d'une

eouehe

brillant

vulnerable

eses

Proctukt

hat

elne

hoehgllnzende

Oberfl

ache

die

sehr

aux

rayurea

; il

convhtnt.

par

consequent

rester

vigilant

eicht

:zerknltzt

warden

kann

w.shalb

wahrend

dar

Montage

du111nt t'lnstallat

ion. A

besondere

Vorslcht

geboten

1st.

ltz a

efllever

salete

i 1

aide

ch!ff

fouml

avant

nettO'jer

chassis.

Pour

Vtrgewissem

Sle

slch.

dass

das

mitgtlleferte

Tudl

sauberist.

be'f'Of

Sil!

tum

Reinigen

nettrJy'l!f

meuble

awnt.

assurez.vous

n'utlllser

que

chiffon

fcumi.

Aspergez.Je

Gehau5e

Yerwenden.Zum

Re!nigen

der

Vordenelte

verwenden

Sle

bine

nur

das

F rant;als

d'9U

4 a 6

fois

puis

nt!nDIJI!Z

frmunt

d3ns

une

seule

direcnon.

ner.oyage.

Deutsch

mltgeiiEferte

Tuch.

auf

das

sle

bis

SprnzerWasser

auftraqen

Wlschen

Sie

dann

In~

essuyez

chassis

pour

enlfMr

l'humidite

Richtung

YOfSichtlg

Qber

d.e

Fl.khe.

Wischen

Sie

das

Gehause

nacn

dem

Remigen

trodlen. :

N'utlllsez

que

eau

comme

proclult

nettoyage

. Verwenden

Sle

nur

Wasser

als

Relnlgungsmtttel

. 1

•-----

----

fl-p~;tt-;,-;

~""oit

_o_

l;,~ido"';.di;~p;,ft

~~; ~h; ~ p~~

g;;iii;,-;.

-i ---------

E.;i;

p,";,d~

;;;;

;,;;;stj._-;

~; ~ -

b;_-b;,t;;;t;;~p;,fl

-cl;-

facnmente; oceorre

far.

attenzione

durante l'l

nstalluiofte

. : A vulnerable a aranazos;

tuga

mucho cuidado durante Ia l

nstaJac:iOn.

Prima

ell

eff!tnW!t.t

ptrllziiJ

tl!liio,asslanrsldli!D pannoappostiment!fomno

sfa

Ellmi~

suciedad

del pal'losumtnistrado

ant25

llmplallaca,a.

Para

limpiar

ella

pullto.

Pet

pullre

parte

anterior~!

del

ablnetasslcurarsi

utillmre

solo

panno

forntto

, 1

caja

frontal.

asegu~

que

utlliza

unlc.amente

pal'lo

que

roda entre 4

cne

~ene"'!

spruzzatoa~

4 o 6

volte

oomadl

strofi

narlo~

~In

: y 6

veces

antes

pasarlo

suawmente en

una

ain!cd6n.

Oespues

limp&ar

ca,a.

tallano un'

uruca

dlrezione.

Oopo

t.t

pu'rzia,asdugare

~lo

per

rlrnuaYere

ogni

tBCai

umk:llta : Espa

nol

sequela

ruidadosamente

para

el~rnsnar

humedad. 1

Come

aostanza

pulente, utnizzare

solo

acqua

. 1

Ump

te unl

camente con

agua. :

·----------------------------------------------------------·------------------------------------------------------------·

Este

procluto

pouul

acabamento

brtlhante

superflele

Ten

produkt

powienchn

akJerowan~

wysok

polysku

partlculannen~

aujei

riaeos;

devem

ser

tomadu

ktora

est

bard:zo

podatna

z.arysow.nia,

dlatego

naluy

devidas

precauc;ou

durante

nstal~

uwatac

podczas

monwu.

Sacuda

o po do

pano

fomeddo antes

mpar

calxa.

Para

oroceder a I

mpeza

Pned

pnys~tem

do czyslCll!nla obudowyna U., strzepac brud z

parte

frontal

certifi

que-se

que

utiliza

a_oenas

o pano

fomeoclo.lige~ramente

mnarld.

czym:zmsa

prmlnit!j

nalely

uzywac:

~~I

mnadci,

Porwgu&s

humedl!ddo.

Jmpai"KiosuavementenumaunJCad~Deposda

mpeza

passe

Polski

~nalezyspt)'SkaC4-6razywodtanast~prtteprzederaepowlerlchn~~:wjednym

panoseco

sobrea

alXildoaparelho para

remowr a hum

dade.

kienln~eu.Pozakol\cmmuczyszz:Dnlil

wytl'liKobu~

sucha.

ili

apenas

agua

como

solu~io

limpeu

Jedynym

oclpowiedntm

aroclkJem

c~cym

jut

wocta. :

~---------

r,-;,~;~~-;,-;;;.~

~~~-~ ;,;.-"-"-

~~.;

~;;.;,;~;~

;,~~;

---------

o~~Q~

~~.-

~;;,;~;'

~~~-Y'Uz~Yi

~~~~~;

b;;.-~t;;

------

A n

of,4apanaT-.;

co6ntoAaMTe

OCTopoliCHocn.

ao ape

...

ycTaNO&KM.

: A

dolayas•yl•

lwtuJum

esnasmda

dikkatU

olunmabdu

1..~

O'II!Cn\OM ~ co;-pmc

HI!!'OnbiJlbc

~llJlMM~

TKaHM.Ilpt1

~rxe

Oolabt

once,On.'ln!e

bir!lkte

bezin

~lie

~inden

emlfl

eoe~

CT~

!IOpl1yQ

101\111'-n

~~PMnaraeMy~QTKaHo.

OPe.'lsapw.eJl:l«) 1

oiun.On

kabim

temizlemek

i9n

yalnaca

birllkte

gelen

kullarun

...e

ila

: p -

'11111aw.l11111et!4-6o.u~wm.3a

"'6!311i!W100l~ll~:111100!tlllllMI4

TOri<

wsupusldltttukteruontatekvOn!Uolaral!~silin.

Temizled

~sonra.

yccKH

111

OJlitOM

Har.paillel1l411.

floc.-:e

'OlC:1<II

Blllipcruopn'j "

!10

OI1HOI'O

Y.ll!.'letiAA

!II¥M. :

anndrrmak

i9n

dQiabj

sllln

1 Mc

notr.,3yina

AnR

&tMC11CM

Ton..-o

• • TemlzJame

O%eltlsl

olarak

yalna.zca

kuJlarun.

:---------~~~~~:~ilB1~~~~~iU~~--:------·--·------------------------------------------------------------

: A

:.;am;~Em.

atf¥

~m~~x-~~~

iliaVl.*&:t·

~{j~.Rf!JH

Jn~HliA'·

7ttt~R'-tJI*4iiJ6

;~. ~j£1

:;:ox

firaJ-1.ir.;::tu£ m.,

~~s~.

iiM~m· ~m,-....t&tJ*~

.RHJD*i$~~~;&]1.

·----------------------------------------------------------·

1111

lll

ltll

lltl

ll ~

Ill

BN63-02368B-OO

Page 71

N(TFliX

shows

over

for

the

only

$7.99

movies

Internet

a month!

TRY

MONTH

ONE

FREE

Page 72

Connect.

Watching Netflix on your Samsung Home Theater

System is easy: simply navigate to the Netflix app

and connect your account.

Watch.

Smile.

Not

member?

Try

FREE

Start

your new Samsung product.

your

to:

netflix

select the

FREE

.com

/sa

Netfl1x

trial

msung13

app on

for

month.

Samsung HT-H6500WM, HT-H6530WM User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual