Samsung HT-FS6200/XU User guide

Download

Page 1

2.1CH Blu-ray™

HT-FS6200

Home Entertainment System

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Page 2

Safety Information

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

WARNING

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION

• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

• The Mains plug is used as a disconnect device and shall stay readily operable at any time.

• This apparatus shall always be connected to an AC outlet with a protective grounding connection.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

This symbol indicates important instructions accompanying the product.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION

• INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.

Wiring the Main Power Supply Plug (UK Only)

IMPORTANT NOTICE

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a mains socket. A plug and fuse must be used at all times.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.

WARNING :

2 English

DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH LETTER E OR BY THE EARTH

SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

Page 3

Disc Storage & Management

• Holding Discs

- Fingerprints or scratches on a disc may reduce sound and picture quality or cause skipping.

- Avoid touching the surface of a disc where data has been recorded.

- Hold the disc by the edges so that fingerprints will not get on the surface.

- Do not stick paper or tape on the disc.

• Cleaning Discs

- If you get fingerprints or dirt on a disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

- When cleaning, wipe gently from the inside to the outside of the disc.

- Disc Storage

Do not keep in direct sunlight. Keep in a cool ventilated area. Keep in a clean protection jacket and store

vertically.

Handling Cautions

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.

• Do not touch the power plug with a wet hand. It can cause an electric shock.

• Do not plug multiple electric devices into the same wall socket. Overloading a socket can cause it to overheat, resulting in a fire.

• Maintenance of the Cabinet

- Before connecting other components to this product, be sure to turn them off.

- If you move your product suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the product, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.

• If the product makes an abnormal noise or produces a burning smell or smoke, turn off the power switch immediately and disconnect the power plug from the wall outlet. Then, contact the nearest customer service centre for technical assistance. Do not use the product. Using the product as it is may cause a fire or an electric shock.

Licence

Manufactured under licence from Dolby Laboratories.

Dolby, Pro Logic, and the double-D symbol are

trademarks of Dolby Laboratories.

Manufactured under a licence

from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, DTS-HD, the Symbol, and DTS or DTS-HD and the Symbol together are registered trademarks & DTS Neo:Fusion is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.

ABOUT DIVX VIDEO: DivX® is a digital video format

created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx. com for more information on how to complete your registration. DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under licence. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274

Safety Information

English 3

Page 4

Safety Information

The terms HDMI and HDMI High-Definition Multimedia

Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licencing LLC in the United States and other countries.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association.

This product uses Cinavia technology to limit the use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Centre at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Centre, P.O. Box 86851, San Diego, CA, 92138, USA.” This product incorporates proprietary technology under licence from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.

- Open Source Licence Notice In the case of using open source software, Open

Source Licences are available on the product menu.

Using the 3D Function

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the 3D function.

• Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea, and headaches. If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest.

• Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses, and rest.

• A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.

• Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.)

• Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury.

• If you want to enjoy 3D content, connect a 3D device (3D compliant AV receiver or TV) to the product’s HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content.

• The product outputs 3D signals only through HDMI cable connected to the HDMI OUT port.

• As the video resolution in 3D play mode is fixed according to the resolution of the original 3D video, you can not change the resolution to your preference.

• Some functions such as BD Wise, screen size adjustment, and resolution adjustment may not operate properly in 3D play mode.

• You must use a high-speed HDMI cable for proper output of the 3D signal.

• Stay at least three times the width of the screen from the TV when watching 3D images. For example, if you have a 46 inch screen, stay 3.5 meters from the screen.

• Place the 3D video screen at eye level for the best 3D picture.

• When the product is connected to some 3D devices, the 3D effect may not function properly.

• This product does not convert 2D content into 3D.

• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of the Blu-ray Disc Association.

4 English

Page 5

MEDIA PLAY

may be reproduced or copied without the prior written permission of Samsung Electronics Co.,Ltd.

Contents

SAFETY INFORMATION

2 Warning 3 Disc Storage & Management 3 Handling Cautions 3 Licence 4 Using the 3D Function 5 Copyright

28 The All Content Screen 28 Playing Commercial Discs 28 Playing Files on a USB Device 29 Playing a Disc with User Recorded Content 29 Using the AllShare Network Function 30 Controlling Video Playback 33 Controlling Music Playback 37 Playing Photo Contents 38 Listening to Radio 40 Using the Special Effects Remote Control Buttons

NETWORK SERVICES

41 Logging In to Your Samsung Account 41 Before Using Movies & TV Shows or Apps 42 Using Movies & TV Shows 42 Using Apps 46 Screen Mirroring 46 Using the Web Browser 49 Linking your Internet Service Accounts to the

Product

49 BD-LIVE™

Safety Information

GETTING STARTED

6 Disk and Format Compatibility 7 Logos of Discs the Product can Play 10 Accessories 11 Front Panel 11 Rear Panel 12 Remote Control

CONNECTIONS

14 Connecting the Speakers 16 Connecting to TV/External Devices 17 Connecting to a Network Router

SETTINGS

18 The Initial Settings Procedure 18 The Home Screen 18 Accessing the Settings Screen 19 Settings Menu Functions 23 Networks and the Internet 26 Upgrading Software

APPENDIX

50 Additional Information 53 Troubleshooting 56 Specifications

 Figures and illustrations in this User Manual are

provided for reference only and may differ from actual product appearance.

An administration fee may be charged if either

a. an engineer is called out at your request and

there is no defect in the product (i.e. where you have failed to read this user manual)

b. you bring the unit to a repair centre and there

is no defect in the product (i.e. where you have failed to read this user manual).

 The amount of such administration charge will

be advised to you before any work or home visit is carried out.

English 5

Page 6

Getting Started

Disk and Format Compatibility

Disc Types and content your Product can Play

Media Disc Type Details

Blu-ray Disc

3D Blu-ray Disc

VIDEO

MUSIC

PHOTO

| NOTES |

The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.



If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.



Your product will not play content that has been recorded on a DVD-R at a bit rate that exceeds 10 Mbps.



Your product will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 30



Mbps. Playback may not work for some types of discs, or when you use specific operations, such as angle change



and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.

When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.



DVD-VIDEO, DVD-RW,

DVD-R, DVD+RW,

DVD+R

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

BD-ROM or BD-RE/-R disc recorded in the BD-RE format.

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been recorded and finalised, or a USB storage media containing DivX, MKV, MP4 contents.

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage media containing MP3 or WMA contents.

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage media containing JPEG contents.

Disc Types your Product cannot Play

• HD DVD

• DVD-ROM/PD/MV-Disc, etc

| NOTES |

This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow



specific or limited operation and provide only certain features during playback. Please note that this is not a defect in the product.

Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because



disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the manufacture of discs.

Please contact the SAMSUNG Customer Care Centre at, if you have questions or encounter difficulty when playing



Blu-ray Disc, DVD, or CD discs in this product. Also, refer to rest of this user manual for additional information on playback restrictions.

Some commercial discs and DVD discs purchased outside your region may not play on this product.



• DVD-RAM

• Super Audio CD (except CD layer)

• DVD-RW(VR mode)

• CVD/CD-ROM/CDV/ CD-G/CD-I/LD (CD-Gs play audio only, not graphics.)

• 3.9 GB DVD-R Disc for Authoring.

6 English

Page 7

Region Code

Both products and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Number for this product is displayed on the rear panel of the product.

Logos of Discs the Product can Play

Getting Started

Disc Type

Blu-ray Disc

Region

Code

Area

North America, Central

America, South America,

Korea, Japan, Taiwan, Hong

Kong and South East Asia.

Europe, Greenland, French

territories, Middle East, Africa,

Australia and New Zealand.

India, China, Russia, Central

and South Asia.

The U.S., U.S. territories and

Canada

Europe, Japan, the Middle

East, Egypt, Africa, Greenland

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

Blu-ray Disc 3D Blu-ray Disc

BD-LIVE Dolby

DivX

Java DTS

PAL broadcast system in

U.K, France, Germany, etc.

DVD-VIDEO

| NOTES |

If the Region number of a Blu-ray Disc/DVDs



does not correspond to the Region number of this product, the product cannot play the disc.

Mexico, South America,

Central America, Australia,

New Zealand, Pacific Islands,

Caribbean

Russia, Eastern Europe, India,

North Korea, Mongolia

China

English 7

Page 8

Getting Started

Supported Formats

Video File Support

File

Extension

*.avi

*.mkv

*.asf *.wmv *.mp4

*.3gp

*.vro

*.mpg

*.mpeg

*.ts

*.tp

*.trp

*.mov

*.flv

*.vob

*.svi *.m2ts

*.mts

*.divx

Container Video Codec Resolution

Divx 3.11 / 4

/ 5 / 6

MPEG4 SP/ASP

AVI

MKV

ASF

MP4

3GP

MOV

FLV VRO VOB

SVAF

H.264 BP/

MP/HP

Motion JPEG

Microsoft

MPEG-4 v3

Window Media

Video v7, v8, v9

MPEG2

MPEG1

VP6 640x480

MVC -

1920x1080

(WMV v7,v8,

MSMPEG4 v3 :

1280x720)

Frame rate

(fps)

6~30 30

-4

24/25/30 60

Bit Rate

(Mbps)

Audio Codec

Dolby Digital

LPCM

ADPCM

(IMA, MS)

AAC

HE-AAC

WMA

Dolby Digital

Plus

MPEG(MP3)

DTS (Core)

*.webm

WebM VP8 1920x1080

Limitations

- Even when a file is encoded by a supported codec listed above, the file might not be played if its content is defective or corrupted.

- Normal playback is not guaranteed if the file's container information is wrong or the file itself is corrupted.

- Files having higher bit or frame rates than standard may stutter when played back.

- The seek (skip) function is not available if the file's index table is damaged.

- When you playback a file remotely through a network connection, video playback may stutter depending on the network speed.

- Some USB/Digital camera devices may not be compatible with the product.

Video decoder

- Supports up to H.264 Level 4.1 (except for FMO/ASO/ RS)

- Does not support VC1 AP L4

- Except for WMV v7, v8, MSMPEG4 v3, MVC, VP6 Below 1280 X 720: 60 frame max Above 1280 X 720: 30 frame max

6~30 20 Vorbis

- Does not support GMC 2 or higher

- Supports SVAF Top/Bottom, Side by Side Only

- Supports BD MVC Spec Only

Audio decoder

- Supports WMA 10 Pro (Up to 5.1)

- Does not support WMA lossless audio.

- Supported ADPCM IMA, MS.

- Does not support ADPCM (A-Law, μ-Low)

- Does not support QCELP, AMR NB/WB

- Supports vorbis (Up to 2ch),

- Supports Dolby Digital Plus (Up to 7.1ch)

Comments

- MPEG4 : Supports up to GMC 1-Warping Point.

- H.264 : Supports up to BP/MP/HP Level 4.1.

- WMV : Supports V9, VC1 SP/MP/AP L3.

- MPEG1 : Does not support D-picture.

- MPEG2 : Supports up to Hight Profile High Level.

8 English

Page 9

❑

Supported DivX subtitle file formats

*.ttxt, *.smi, *.srt, *.sub, *.txt

| NOTES |

Some MKV and MP4 format discs may not play,



depending on their video resolution and frame rate.

Music File Support

Picture File Support

File Extension Type

*.jpg

*.jpeg

*.png

JPEG

PNG

Resolution

15360x8640

4096x4096

Getting Started

File

Extension

*.mp3

*.m4a *.mpa

*.aac

*.flac

*.ogg

*.wma

*.wav

*.mid *.midi

*.ape

Container

MPEG

MPEG4

FLAC

OGG

WMA

wav

midi

ape

Audio

Codec

MPEG1

Audio

Layer 3

AAC -

FLAC

Vorbis

WMA

wav -

midi type 0 and type 1

ape

Support Range

Supports up to

2ch

Supports up to

2ch

Supports WMA 10

Pro (Up to 5.1)

Does not support

WMA lossless

audio

Supports up to M2

profile

Does not support

LBR mode

Does not support

X13, NVT

*.bmp

*.mpo

BMP

MPO

4096x4096

15360x8640

Notes on the USB connection

• Your product supports USB storage media, MP3 players, digital cameras, and USB card readers.

• The product does not support folder or file names longer than 128 characters.

• Some USB/digital camera devices may not be compatible with the product.

• Your product supports the FAT 16, FAT 32, and NTFS file systems.

• Connect USB devices directly to the product’s USB port. Connecting through a USB cable may cause compatibility problems.

• Inserting more than one memory device into a multi-card reader may cause the reader to operate improperly.

• The product does not support the PTP protocol.

• Do not disconnect a USB device during a “loading” process.

• The bigger the image resolution, the longer the image takes to display.

• This product cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial sites.

• Your product only supports video that is under 30fps (frame rate).

• Your product only supports USB Mass Storage Class (MSC) devices such as thumb drives and USB HDD. (HUB is not supported.)

• Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible with this product.

• If some USB devices require excessive power, they may be limited by the circuit safety device.

English 9

Page 10

Getting Started

• If playback from a USB HDD is unstable, provide additional power by plugging the HDD into a wall socket. If the problem continues, contact the USB HDD manufacturer.

• SAMSUNG is not responsible for any data file damage or data loss.

AVCHD (Advanced Video Codec High Definition)

• This product can play back AVCHD format discs. These discs are normally recorded and used in camcorders.

• The AVCHD format is a high definition digital video camera format.

• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing format.

• Some AVCHD discs use the “x.v.Colour” format. This product can play back AVCHD discs that use the “x.v.Colour” format.

• “x.v.Colour” is a trademark of Sony Corporation.

• “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony Corporation.

| NOTES |

Some AVCHD format discs may not play, depending



on the recording conditions. AVCHD format discs need to be finalised.



“x.v.Colour” offers a wider colour range than normal



DVD camcorder discs. Some DivX, MKV and MP4 format discs may not play,



depending on their video resolution and frame rate.

Accessories

Check for the supplied accessories below.

User Manual Soft Cloth

FM Antenna Power Cable

FUNCTION

SOURCE

RECEIVER

SLEEP

BD TV

RDS DISPLAY TA

123

PTY- PTY+PTY SEARCH

809

DISC MENU TITLE MENU

POPUP

MUTE

TUNING

TV SOUND

VOL

/ CH

HOME

FULL SCREEN REPEAT

TOOLS

INFO

RETURN

EXIT

TUNER

MO/ST

MEMORY

ABCD

3D SOUND

S/W LEVEL

SMART SEARCH

HUB

SOUND

MANUAL

SUBTITLE

AUDIO

EFFECTPRESET

Remote Control/

Batteries (AAA size)

10 English

Page 11

Front Panel

N D

5V 0.5A

HDMI OUT

HDMI IN

1 2

LAN

POWER

AUX IN FM ANT

OPTICAL

DIGITAL AUDIO IN

SPEAKERS OUT

SUBWOOFER

FRONT

IMPEDANCE : 3

VACUUM TUBE AMP

VOLUME CONTROL

OPEN/CLOSE

PLAY/PAUSE

STOP

FUNCTION

DISPLAYDISC TRAY

REMOTE CONTROL SENSOR

POWER USB

| NOTES |

Cellular phones or mobile devices placed near the vacuum tube amp or electronic products placed on the top of the



product can cause audio noise or distortion. When the product is on, do not let children touch the product's surface. It will be hot.



To upgrade the product's software through the USB jack, you must use a USB flash drive.



When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the 6 button on the



product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the

button.

If you use the Internet service or play the USB device contents on the TV, you cannot select the BD/DVD mode with



the FUNCTION button. Stop the playing contents on the TV first to select the BD/DVD mode.

Getting Started

Rear Panel

SPEAKER OUTPUT

CONNECTORS

COOLING FAN

POWER CORD HDMI OUT LAN TERMINAL EXTERNAL DIGITAL

* Connecting the FM Antenna

1. Connect the FM antenna supplied to the FM ANT Jack.

2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or

other rigid surface.

NOTES



Maintain a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation. Do not obstruct the cooling fan or ventilation holes. This product does not receive AM broadcasts.

HDMI IN AUX IN * FM ANTENNA

AUDIO IN (OPTICAL)

English 11

Page 12

Getting Started

Remote Control

Tour of the Remote Control

Turn the product on and off.

To change to Television mode

and control the TV, press the TV

button.

To change to Home Cinema mode

and control the Home Cinema,

press the BD button.

Press numeric buttons to operate

options.

Press to view the disc menu.

Press to skip backwards or

forwards.

Press to stop/play a disc.

Cut off the sound temporarily.

Adjust the volume.

Press to move to the Home screen.

Press to see the full screen

on a TV.

Press to use the Tools menu.

Select on-screen menu items and

change menu values.

FUNCTION

SOURCE

RECEIVER

BD TV

RDS DISPLAY TA

PTY- PTY+PTY SEARCH

DISC MENU TITLE MENU

MUTE

TV SOUND

VOL

FULL SCREEN REPEAT

TOOLS

HOME

SLEEP

POPUP

TUNING

/ CH

INFO

Press to select the home cinema's mode (HDMI1, AUX, BD/DVD, etc.).

or Press to select TV's video mode.

Set a Sleep time to shut off the product.

Press to open and close the disc tray.

Use the RDS function to receive FM stations.

Use to enter the Popup menu/Title menu.

Press to search backwards or forwards.

Press to pause a disc.

Search for active FM stations and to change channels.

Press to output the audio signal to the home cinema speakers or the TV Speaker. (See page 40)

Allows you to repeat a title, chapter, track or disc.

Use to display the playback information when playing a Blu-ray/DVD disc.

Return to the previous menu.

These buttons are used both for

menus on the product and also

several Blu-ray Disc functions.

Press to use Smart Hub.

Press to select MANUAL/PRESET in

the Tuner function.

Press to search contents.

Selects the disc Audio language.

12 English

RETURN

ABCD

SMART SEARCH

HUB

AUDIO

MANUAL

TUNER

MEMORY

S/W LEVEL

SUBTITLE

EXIT

MO/ST

3D SOUND

SOUND

EFFECTPRESET

Press to exit the menu.

Use to set a preset radio frequency.

Select MONO or STEREO for radio broadcasts.

Press to apply the 3D sound effect. Press to apply sound effects.

Use to adjust the level of the subwoofer.

Selects the disc subtitle language.

Page 13

Installing batteries in the Remote Control

TV Control Codes

Battery size: AAA

| NOTES |

Make sure to match the “+” and “–” ends of the



batteries with the diagram inside the compartment. Assuming typical TV usage, the batteries last for about



one year. The remote control can be used up to approximately 7



meters from the product in a straight line.

Setting up the Remote Control

You can control certain functions of your TV with this remote control.

To operate a TV with the Remote Control

1. Press the TV button to set the remote control to TV

mode.

2. Turn on your TV.

3. While holding down the POWER button, enter the

code corresponding to your brand of TV.

• If there is more than one code listed for your TV in the table, enter one at a time to determine which code works.

• Example : For a Samsung TV While holding down the POWER button, use the number buttons to enter 00. If that does not work, try 15, then 16, etc.

4. If the TV turns off, the setting is complete.

• You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9).

| NOTES |

The remote may not be able to control some



functions, depending on your brand of TV. Also, the remote control may not work on some brands of TVs.

The remote control will work with Samsung TVs by



default.

Brand Code

Admiral

(M.Wards)

A Mark 01, 15

Anam

AOC 01, 18, 40, 48

Bell & Howell

(M.Wards) Brocsonic 59, 60

Candle 18

Cetronic 03

Citizen 03, 18, 25 Cinema 97 Classic 03

Concerto 18

Contec 46

Coronado 15

Craig 03, 05, 61, 82, 83, 84

Croslex 62

Crown 03

Curtis Mates 59, 61, 63

CXC 03

Daewoo

Daytron 40 Dynasty 03

Emerson

Fisher 19, 65 Funai 03

Futuretech 03

General Electric

(GE)

Hall Mark 40

Hitachi 15, 18, 50, 59, 69

Inkel 45

JC Penny 56, 59, 67, 86

JVC 70

KTV 59, 61, 87, 88 KEC 03, 15, 40 KMC 15

LG (Goldstar)

Luxman 18

LXI (Sears)

Magnavox

Marantz 40, 54

Matsui 54

MGA 18, 40

56, 57, 58

01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14

57, 58, 81

02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 34,

35, 36, 48, 59, 90

03, 15, 40, 46, 59, 61, 64,

82, 83, 84, 85

06, 40, 56, 59, 66, 67, 68

01, 15, 16, 17, 37, 38, 39,

40, 41, 42, 43, 44

19, 54, 56, 59, 60, 62, 63,

65, 71

15, 17, 18, 48, 54, 59, 60,

62, 72, 89

Brand Code

Mitsubishi/MGA 18, 40, 59, 60, 75

MTC 18 NEC 18, 19, 20, 40, 59, 60 Nikei 03

Onking 03

Onwa 03

Panasonic

Penney 18

Philco

Philips

Pioneer 63, 66, 80, 91

Portland 15, 18, 59

Proton 40

Quasar 06, 66, 67

Radio Shack 17, 48, 56, 60, 61, 75

RCA/Proscan

Realistic 03, 19

Sampo 40

Samsung

Sanyo 19, 61, 65

Scott 03, 40, 60, 61 Sears 15, 18, 19

Sharp 15, 57, 64

Signature 2000

(M.Wards)

Sony 50, 51, 52, 53, 55

Soundesign 03, 40

Spectricon 01

SSS 18

Sylvania

Symphonic 61, 95, 96

Tatung 06

Techwood 18

Teknika 03, 15, 18, 25

TMK 18, 40 Toshiba 19, 57, 63, 71 Vidtech 18

Videch 59, 60, 69

Wards

Yamaha 18

York 40 Yupiteru 03

Zenith 58, 79 Zonda 01

Dongyang 03, 54

06, 07, 08, 09, 54, 66,

67, 73, 74

03, 15, 17, 18, 48, 54,

59, 62, 69, 90

15, 17, 18, 40, 48, 54,

62, 72

18, 59, 67, 76, 77, 78,

92, 93, 94

00, 15, 16, 17, 40, 43,

46, 47, 48, 49,

59, 60, 98

57, 58

18, 40, 48, 54, 59, 60,

15, 17, 18, 40, 48, 54,

60, 64

Getting Started

English 13

Page 14

Connections

This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Position of the product

Place it on a stand or cabinet shelf, or under the TV stand.

Subwoofer

Front (L)

Front

Speakers

Subwoofer

Place these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the front speakers so that their tweeters will be at the same height as your ear.

The position of the subwoofer is not so critical. Place it anywhere you like.

Speaker Components

Product

Front (R)

Selecting the Listening Position

The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. For example, if you have a 46 inch screen, locate the listening position 2.92 to 3.50 meters from the screen.

14 English

Screw (5x20) x 8

SubwooferFront x 2 Stand Base x 2 Speaker Cable x 3

Page 15

Installing the Speakers on the Tallboy Stand

HDMI OUT

SPEAKERS OUT

SUBWOOFER

FRONT LFRONT

,03('$1&(

SPEAKERS OUT

SUBWOOFER

FRONT

,03('$1&(

Stand Base

2 3

Speaker

1. Turn the Stand Base upside-down and connect it to the Speaker as shown in the illustrator.

2. Use the driver to combine the screws on the 4 marked holes.

3. This is the appearance after the speaker is installed. Follow this steps to install another speaker.

Connecting The Speakers

1. Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each bundle to

the coloured sticker on the bottom of each speaker.

2. To attach speaker wire to each speaker: a. Press down the red tab on the back of the speaker, insert the red wire, and then release the tab. b. Press down the black tab on the back of the speaker, insert the black wire, and then release the tab.

3. Connect the speaker wire plugs from each speaker to the back of the product by matching the colours of the

speaker plugs to the colours of the speaker jacks.

Connections

Front Speaker (R)

Black

Red

Front Speaker (L)

Subwoofer

| CAUTION |

If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the



rear of speaker to install. However, when you install it, accessories (nails or screws) and installation is not provided by the company.

Do not let children play with or near the speakers. They could get hurt if a speaker falls.



When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.

 



| NOTES |



Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker. Do not hang the subwoofer on the wall using the duct (hole).

If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field.

English 15

Page 16

Connections

HDMI OUT

HDMI IN

1 2

LAN

POWER

AUX IN FM ANT

OPTICAL

DIGITAL

AUDIO IN

SPEAKERS OUT

SUBWOOFER

FRONT LFRONT

,03('$1&(

HDMI OUT

HDMI IN

1 2

LAN

AUX IN FM ANT

OPTICAL

DIGITAL

AUDIO IN

OPTICAL OUT

AUDIO OUT

HDMI OUTHDMI IN

Connecting to TV/External Devices

Red

White

Method 1 Method 2 Method 3

External Devices

Connecting to a TV

Connect an HDMI Cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control and select HDMI as the external source of the TV.

Connecting to External Devices

To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the mode changes in this order : BD/DVD  D. IN  AUX  HDMI1  HDMI2  FM  BT

Method 1 HDMI IN : Connecting to an External Component with an HDMI Cable

Connect an HDMI Cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device.  Select the HDMI1 or HDMI2 mode.

Method 2 AUX IN : Connecting an External Analogue Component

Using a RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the external analogue component.  Select the AUX mode.

• Be sure to match the colours on the cable plugs to the colours on the input and output jacks.

Method 3 OPTICAL : Connecting an External Digital Audio Component

To connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-TopBoxes). Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device.

Select the D. IN mode.



| NOTES |

To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.



This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.



This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.



16 English

Page 17

Connecting to a Network Router

Wireless Network

You can connect your product to your network router using one of the methods illustrated below.

Wired Network

POWER

SPEAKERS OUT

FRONT LFRONT

,03('$1&(

SUBWOOFER

HDMI IN

1 2

HDMI OUT

Broadband modem

(with integrated router)

Router

| NOTES |

Your router or your Internet Service Provider's policies



may prevent the product from accessing Samsung's software update server. If this occurs, contact your Internet Service Provider (ISP) for more information.

DSL users, please use a router to make a network



connection. To use the AllShare function, you must connect your



PC to your network as shown in the illustrations on the above. The connection can be wired or wireless.

AUX IN FM ANT

LAN

OPTICAL

DIGITAL AUDIO IN

Broadband

modem

Broadband

service

Broadband

service

Wireless IP sharer

Broadband

service

| NOTES |

If your wireless IP router supports DHCP, this product



can use a DHCP or static IP address to connect to the wireless network.

Set your wireless IP router to Infrastructure mode. Ad-



hoc mode is not supported. The product supports only the following wireless



security key protocols:

- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)

Select a channel on the wireless IP router that is not



currently being used. If the channel set for the wireless IP router is currently being used by another device nearby, it will result in interference and communication failure.

In compliance with the newest Wi-Fi certification



specifications, Samsung home theaters do not support WEP, TKIP, or TKIP-AES (WPS2 Mixed) security encryption in networks running in the 802.11n mode.

Wireless LAN, by its nature, may cause interference,



depending on the operating conditions (AP performance, distance, obstacles, interference by other radio devices, etc).

Connections

English 17

Page 18

Settings

The Initial Settings Procedure

• The Home menu will not appear if you do not configure the initial settings.

• The OSD (On Screen Display) may change in this product after you upgrade the software version.

• The access steps may differ depending on the menu you selected.

The Initial Settings Procedure lets you set the OSD and menu languages, configure the connection to your home network, choose the aspect ratio output (screen size and format) that is correct for your TV, and apply an upgrade to your product's software, if one is available. For complete Initial Settings instructions, follow the order in the screen.

| NOTES |

If you want to display the Initial Settings screen again



and make changes, select Settings > System > Setup in the Home screen or select the Reset option.

(See page 21)

The Home Screen

Photos, Videos & Music : Play photos, videos or music content from Disc, USB, PC or mobile

devices.

Settings : Set various functions to suit your

personal preferences.

RED (A) : Press the RED (A) button on your remote to create and/or log in to your personal Samsung account.

BLUE (D) : Set up the wireless mirroring function between the home cinema and a smart phone or tablet.

Selecting an Option on the Home Screen

1. To select an option on the Home screen, move the cursor using the

▲▼◄►

buttons until it highlights the option of your choice, and then press the E button.

| NOTES |

If you leave the product in the stop mode for more



than 5 minutes without using it, a screen saver will appear on your TV. If the product is left in the screen saver mode for more than 20 minutes, the power will automatically turn off.

2 3

Movies & TV Shows

Add App Add App Add App Web Browser Settings

Apps Photos,

Samsung Account d Screen Mirroring

Videos & Music

Movies & TV Shows : Download movies and TV Shows from the Internet.

| NOTES |

Depending on your country, this menu



function may not be supported.

Recommended Apps : A list of useful and

popular apps we recommend you download.

Web Browser : You can access the Internet

using the Web Browser application.

Accessing the Settings Screen

1. Select Settings on the Home screen, and then press E. The Settings screen appears.

Settings

Display

2. To access the menus, sub-menus, and options

Display

Audio

Network

Smart Features

System

Support

3D Settings

TV Aspect Ratio

16:9 Original

BD Wise Off

Resolution Auto

Movie Frame (24Fs) Auto

DVD 24fps Conversion Off

Smart Hub Screen Size Size 3

on the Settings screen, please refer to the remote control illustration on the next page.

Apps : Download/Access various for pay or

free-of-charge applications.

18 English

Page 19

Buttons on the Remote Control Used

FULL SCREEN REPEAT

TOOLS

RETURN

EXIT

INFO

MO/ST

TUNER

MEMORY

HOME

for the Settings Menu

TV Aspect

Ratio

Lets you adjust the output of the product to the screen size of your TV. See page 50.

BD Wise is Samsung’s latest inter-

connectivity feature. When you connect a Samsung product and a Samsung TV with BD

BD Wise

Wise to each other via HDMI, and BD Wise is on in both the product and TV, the product outputs video at

the video resolution and frame rate of the Blu-ray/DVD Disc.

Lets you set the output resolution of

HOME Button : Press to move to the Home

screen.

the HDMI video signal to

BD Wise, Auto, 1080p, 1080i, 720p, 576p/480p. The number

RETURN Button : Return to the previous menu.

Resolution

indicates the number of lines of video per frame. The i and p indicate

(Enter) / DIRECTION Button :

• Press an item.

▲▼◄►

to move the cursor or select

• Press the E button to activate the currently selected item or confirm a setting.

EXIT Button : Press to exit the current menu.

interlaced and progressive scan, respectively. The more lines, the higher quality.

Setting the Movie Frame (24Fs) feature to Auto lets the product adjust its HDMI output to 24 frames per second automatically for improved picture quality if attached

Detailed Function Information

Each Settings function, menu item, and individual option is explained in detail on-screen. To view an explanation, use the ▲▼◄►buttons to select the function, menu item, or option. The explanation will usually appear on the right of the screen.

A short description of each Settings function starts on this page. Additional information on some of the functions is also in the Appendix of this manual.

Settings Menu Functions

Movie Frame

(24Fs)

DVD 24fps

Conversion

to a 24Fs compatible TV.

• You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate.

• Movie Frame is only available when the product is in the HDMI 1080p output resolution modes.

Converts DVD playback to 24 frames per second and outputs it via HDMI. This option is only available when Movie Frame (24Fs) is set to on.

Settings

3D Settings

Display

Set up the 3D related functions.



3D Blu-ray Playback Mode: Select whether to play a Blu-ray Disc with 3D contents in 3D Mode. If you move to the Home or Smart Hub Home menu while in 3D mode, the product will switch to 2D automatically.

Screen Size: Enter the size of the

TV attached to the product. The product will automatically adjust the 3D output to the screen size of the TV.

Smart Hub

Screen Size

HDMI Colour

Format

Lets you select the optimal size for the Smart Hub Screen.

Lets you set the colour space format for the HDMI output to match the capabilities of the connected device (TV, monitor, etc).

English 19

Page 20

Settings

HDMI Deep

Colour

Progressive

Mode

Speaker Settings

Equaliser

Smart Volume

Speaker

Selection

Audio Return

Channel

Lets you set the product to output video from the HDMI OUT jack with Deep Colour. Deep Colour provides more accurate colour reproduction with greater colour depth.

Lets you improve picture quality when viewing DVDs.

Audio

Lets you adjust the following speaker settings.

: Lets you adjust the relative

Level

loudness of each speaker from 6db to -6db. For example, if you like deep bass, you can increase the loudness of the subwoofer by 6db.

Distance

relative distance of each speaker from the listening position up to 9 meters. The farther the distance, the louder the speaker will be.

Lets you configure the Equaliser settings manually.

Lets you set the product so that the volume remains stable when a scene change occurs or when you change the channel.

Lets you select which speakers you want active, either the TV's speakers or the home cinema's speakers.

Lets you direct the sound from the TV to the Home Cinema speakers. Requires a HDMI connection and an Audio Return Channel (ARC) compatible TV.

• If Audio Return Channel is set to on and you are using an HDMI Cable to connect the product to the TV, digital optical input will not work.

• If Audio Return Channel is set to auto and you are using an HDMI Cable to connect the product to the TV, ARC or digital optical input is selected automatically.

: Lets you adjust the

Digital Output

Dynamic

Range

Control

Downmixing

Mode

Audio Sync

Network

Status

Network

Settings

Lets you set the Digital Output to match the capabilities of the AV receiver you’ve connected to the product. For more details, please refer to the digital output selection table. (See page 52)

Lets you apply dynamic range control to Dolby Digital, Dolby Digital Plus, and Dolby TrueHD audio.



Auto: Automatically controls the dynamic range of Dolby TrueHD audio, based on information in the Dolby TrueHD soundtrack. Also turns dynamic range control off for Dolby Digital and Dolby Digital Plus.

Off: Leaves the dynamic range

uncompressed, letting you hear the original sound.

On: Turns dynamic range control on

for all three Dolby formats. Quieter sounds are made louder and the volume of loud sounds is reduced.

Lets you select the multi-channel downmix method that is compatible with your stereo system. You can choose to have the product downmix to normal stereo or in surround compatible stereo.

When the product is attached to a digital TV, lets you adjust the audio delay so that the audio syncs with the video. You can set the delay between 0 and 300 milliseconds.

Network

Lets you check the current network and Internet status.

Configure the network connection so you can enjoy various features such as Internet services or AllShare Wi-Fi functionality, and perform software upgrades.

20 English

Page 21

Wi-Fi Direct

AllShare Settings

Lets you connect a Wi-Fi Direct device to the product using a peerto-peer network, without the need for a wireless router. Note that if the product is connected to a wireless network, it may be disconnected when you use Wi-Fi Direct.

| NOTES |

Text files, such as files with a .TXT



or .DOC extension, will not display when you are using the Wi-Fi Direct function.

Lets you control which devices on your network, such as smart phones and tablets, can share content with your TV.

VOD Rating

Lock

Terms &

Conditions,

Reset Smart

Hub

You can lock access to Video on Demand (VOD) content based on its rating.

| NOTES |

The default security PIN is 0000.



Depending on your country,



this menu function may not be supported.

Lets you view the Smart Hub Terms and Conditions and Privacy Policy.

Resets all Smart Hub settings to their default settings.

| NOTES |

The default security PIN is 0000.



Settings

Device Name

BD-Live Settings

Apps Settings

Lets you assign an identifying name to the product. You use this name to identify the product when you are connecting external Wi-Fi devices (smart phones, tablets, etc.) to it.

Set various BD-Live functions. BD-Live allows you to access extra features available on some Blu-ray Discs if you are connected to the Internet.

BD-Live Internet Connection :

Lets you fully allow, partly allow, or prohibit a BD-Live Internet connection.

BD Data Management : Manage

BD data downloaded from a BDLive service or Blu-ray Disc.

Smart Features

Lets you configure App notification settings and view basic info about your Apps.



Push Notification Settings : Receive notifications from selected services.

Properties : See basic info about

Apps.

Setup

Language

Device

Manager

System

Lets you re-run the Initial Settings procedure.

You can select the language you prefer for the On-Screen menu, disc menu, subtitles, etc.

• The language you select for the disc menu, disc audio, or subtitles will only appear if it is supported on the disc.

You can connect a wireless USB keyboard or mouse to the USB port on the front of the product.



Keyboard Settings: Lets you configure a wireless USB keyboard connected to the product.

| NOTES |

You can use the keyboard only



when a QWERTY keyboard screen or window appears in the Web Browser.



Mouse Settings: Lets you configure a wireless USB mouse connected to the product. You can use the mouse in the product's menu in the same way you use a mouse on your PC.

English 21

Page 22

Settings

Device

Manager

Security

To use a mouse with the

product's menu:

1. Connect the USB mouse to

the

product

2. Click the primary button you selected in Mouse Settings. The Simple Menu appears.

3. Click the menu options you want.

| NOTES |

Some USB HID keyboards and



mice may not be compatible with your product.

Some HID keyboard keys may



not work. Wired USB keyboards are not



supported. Some applications may not be



supported. If a wireless HID Keyboard does not



operate because of interference, move the keyboard closer to the product.

The default security PIN is 0000. Enter the default PIN to access the security function if you haven't created your own PIN.



BD Parental Rating: Restrict playback of Blu-ray discs with specific ratings unless the PIN is entered.

DVD Parental Rating: Prevents

playback of DVDs with a rating above a specific numerical rating you have set unless the PIN is entered.

Change PIN: Change the 4-digit

PIN used to access security functions.

If you forget your PIN

1. Remove any disc or USB storage device.

General

Anynet+

(HDMI-CEC)

2. Press and hold the 5 button

on the front panel for 5 seconds or more. All settings will revert to the factory default settings.

| NOTES |

When the factory default settings



are restored, all the user stored BD data is deleted.

You can specify the display brightness and time zone.



Front Display: Lets you change the brightness of the front panel.

Time Zone: You can specify the

time zone that is applicable to your area.

Menu Transparency: Adjust the

transparency of the menu box.

Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature and lets you control those products with one Samsung TV remote. To operate this function, you must connect this product to an Anynet+ Samsung TV using an HDMI Cable.

If you want to use an Anynet+ (HDMI-CEC) function, please follow the instructions below.

Connect the product to an

Anynet+ (HDMI-CEC)-compliant Samsung TV using HDMI Cable.

Set the Anynet+ (HDMI-CEC)

feature to On in both the TV and the product.

Search for and then select the

product in the TV's Anynet+ (HDMI-CEC) list. For more exact instructions, see the Anynet+ section of the TV's user's manual.

22 English

DivX® Video

On Demand

View DivX® VOD Registration Codes to purchase and play DivX® VOD contents.

Page 23

Remote

Management

Support

When activated, lets Samsung Call Centre agents diagnose and fix problems with the product remotely. Requires an active Internet connection. Remote Management service might not be available in some countries.

1. In the Home screen, select Settings, and then press the E button.

2. Select Network, and then press the E button.

3. Select Network Settings, and then press the E

button.

4. Go to the instructions for Wired networks starting below or the instructions for Wireless networks starting on page 24.

Settings

Software

Update

For more information about the Software Update function, see "Upgrading Software" on page 26.

Lets you set the Use mode. If you

Usage Mode

are using the home cinema at home, always select Home. Store is for retail display settings only.

Contact

Samsung

Provides contact information for assistance with your product.

Reverts all settings to their defaults except for the network and Smart

Reset

Hub settings, and then starts the Setup function. Requires that you enter your security PIN. The default security PIN is 0000

Networks and the Internet

When you connect this product to a network, you can use network based applications and functions such as Smart Hub and BD-LIVE, and upgrade the product's software through the network connection. For more information about accessing and using Internet services, see the Network Services chapter of this manual on pages 41~49. Instructions for configuring the network connection start below.

Configuring Your Network Connection

Wired Network

❑

Wired – Automatic

After following Steps 1 to 3 above:

1. In the Network Settings screen, change Network type to Wired. Then, select Connect and press

the E button. The product detects the wired connection, verifies the network connection and then connects to the network.

2. When it is done, highlight OK, and then press E button.

❑

Wired - Manual

If you have a static IP address or the automatic procedure does not work, you'll need to set the Network Settings values manually.

After following Steps 1 to 3 above:

1. In the Network Settings screen, change Network type to Wired. Then, select Connect and press the

button. The product searches for a network, and then displays the connection failed message.

| NOTES |

If it is possible to connect the home cinema to your



network wirelessly, select Change Network at this point, change the Network type to Wireless, and then go to the instructions for wireless networks on page 24.

If you didn't configure your network connection during the initial settings procedure or you need to reset the network connection, follow the directions below.

Before you begin, contact your Internet Service Provider to find out if your IP address is static or dynamic. If it is dynamic, and you have a wired or wireless network, we recommend using the Automatic configuration procedures described below.

If you are connecting to a wired network, connect the product to your router using a LAN cable before you start the configuration procedure.

To begin configuring your network connection, follow these steps:

Network Settings

Wired network connection failed.

Unable to connect to the network. Try the following: check if your IP address is set correctly in IP Settings. Contact your Internet service provider for more information.

MAC Address XX:XX:XX:XX:XX:XX IP Address 0. 0. 0. 0 Subnet Mask 0. 0. 0. 0 Gateway 0. 0. 0. 0 DNS Server 0. 0. 0. 0

IP SettingsChange Network Retry Close

2. Use the ◄► buttons to select IP Settings, and then press the E button. The IP Settings screen appears.

English 23

Page 24

Settings

3. Select the IP setting field, and then set it to Enter manually.

4. Select a value to enter (IP Address, for example),

and then press E. Use the number keypad on your remote control to enter the numbers for the value. You can also enter numbers using the ▲▼ buttons. Use the ◄► buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the E button.

5. Press the ▲ or ▼ button to move to another value, and then enter the numbers for that value following the instructions in Step 4.

6. Repeat Steps 4 and 5 until you have filled in all values.

NOTES



You can get the Network values from your Internet provider.

7. When finished entering all the values, select OK, and then press the E button. The home cinema verifies the network connection and then connects to the network.

Wireless Network

You can setup a wireless network connection in three ways:

- Wireless Automatic

- Wireless Manual

- WPS(PBC)

Before you configure the wireless network connection, disconnect any wireless network device currently connected to the product or, if applicable, the product's current wired connection.

❑

Wireless - Automatic

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 23:

1. In the Network Settings screen, change Network type to Wireless. The product searches for and

then displays a list of the available networks.

Network Settings

Select your network type.

Network type Wireless

Wireless network

si-ap

iptime

iptime5G

KIMING_VTOWER

TIAS

Refresh WPS(PBC)

You can connect your Blu-ray player to the internet. Please select which wireless network to use.

2. Select the desired network, and then press the E button.

3. On the Security screen, enter your network's security code or pass phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with ▲▼◄► buttons, and then pressing E button.

4. When finished, select Done, and then press the E button. The product verifies the network connection and then connects to the network.

| NOTES |

You should be able to find the security code or pass



phrase on one of the set up screens you used to set up your router or modem.

❑

Wireless - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 23:

1. In the Network Settings screen, change Network type to Wireless. The product searches for and

then displays a list of the available networks.

2. Scroll through the list, select the desired network or Add Network, and then press the E button.

3. If you selected a network in Step 2, go to Step 6. If you selected Add Network, go to Step 4.

4. Enter your wireless network or wireless router's

name.

• Enter numbers directly using the number buttons

on your remote control.

• Enter letters by selecting a letter with the ▲▼◄►

buttons, and then pressing the E button.

• To display capital letters (or redisplay small letters

if capital letters are displayed), select

, and

then press the E button.

• To display symbols and punctuation, select

123#&, and then press the E button. To redisplay letters, select 123#&, and then press

the E button. When finished, select Done, and then press the E button.

24 English

Page 25

5. On the Security type screen that appears, use the ▲▼ buttons to select the network's Security type, and then press the E button. On the next screen, enter your network's security code or pass phrase.

• Enter numbers directly using the number buttons

on your remote control.

• Enter letters by selecting a letter with the ▲▼◄►

buttons, and then pressing the E button. When finished, select Done, and then press the E button. The product searches for the network.

6. The Network connection fail screen appears. Use ◄► buttons to select IP Settings, and then press the E button.

7. Select the IP setting field, and then set it to Enter manually.

8. Select a network value to enter (IP Address, for

example), and then press E button. Use the number keypad on your remote control to enter the numbers for the value. You can also enter numbers using the ▲▼ buttons. Use the ◄► buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the

button.

9. Press the ▲ or ▼ button to move to another value, and then enter the numbers for that value following the instructions in Step 8.

10. Repeat Steps 8 and 9 until you have filled in all values.

| NOTES |

You can get the Network values from your Internet



provider.

11. When finished, select OK, and then press the E button. The Security Screen appears.

12. On the Security screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.

13. When finished, select Done at the right of the screen, and then press the E button. The product verifies the network connection and then connects to the network.

14. After the home cinema verifies the network, select OK, and then press the E button.

| NOTES |

You can also begin the Manual Network setting by



going to Settings >Network > Network Status.

❑

WPS(PBC)

One of the easiest ways to set up the wireless network connection is using the WPS(PBC) function. If your wireless router has a WPS(PBC) button, follow these steps:

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 23:

1. In the Network Settings screen, change Network type to Wireless. The product searches for and

then displays a list of the available networks.

2. Scroll the list down, select WPS(PBC), and then press the E button.

3. Press the WPS(PBC) button on your router within two minutes. Your product automatically acquires all the network settings values it needs and connects to your network. The product connects to the network after the network connection is verified.

4. When it is done, highlight OK, and then press E button.

| NOTES |

For WPS connection, set your wireless router’s



security encryption to AES. Setting to WEP security encryption does not support WPS connection.

Wi-Fi Direct

The Wi-Fi Direct function allows you to connect Wi-Fi Direct devices to the product and each other using a peer-to-peer network, without a wireless router.

| NOTES |

Some Wi-Fi Direct devices may not support the



AllShare function if connected via Wi-Fi Direct. If this is the case, change the network connection method you used to connect the device to the home cinema.

Wi-Fi Direct transmissions can interfere with the



Bluetooth signal. Before you use the Bluetooth function, we strongly recommend that you turn off the Wi-Fi Direct function on any device in which it is currently on.

1. Turn on the Wi-Fi direct device and activate its Wi-Fi Direct function.

2. In the Home screen, select Settings, and then press the E button.

3. Select Network, and then press the E button.

4. Select Wi-Fi Direct, and then press the E button.

The Wi-Fi Direct devices that you can connect appear.

Settings

English 25

Page 26

Settings

Device Name : [HTS]FS6200

Select your Wi-Fi Direct device to connect to.

AndroidXXXXXXX Disconnected

5. You have three ways to complete the Wi-Fi connection:

• Through the Wi-Fi device.

• Through the product using PBC.

• Through the product using a PIN.

Each is covered below.

Wi-Fi Direct

Refresh

Through the Wi-Fi Device

1. On the Wi-Fi device, follow the device's procedure

for connecting to another Wi-Fi Direct device. See the device's user manual for instructions.

2. When you have completed the procedure, you should see a pop-up on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Select OK, and then press the E button to accept.

3. The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

• The PBC and PIN procedures connect devices automatically.

Through the Product Using PBC

1. Select the Wi-Fi Direct device you want to connect

to this product, and then press the E button.

2. The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

Through the Product Using a PIN

4. The Connecting pop-up appears, followed by the

Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

| NOTES |

The current wired or wireless network connection



will be disconnected when you use the Wi-Fi Direct function.

Text files, such as files with a .TXT or .DOC extension,



will not display when you are using the Wi-Fi Direct function.

Upgrading Software

The Software Update menu allows you to upgrade the product’s software for performance improvements or additional services.

• Never turn the product off or back on manually during the update process.

1. In the Home menu, select Settings, and then press the E button.

2. Select Support, and then press the E button.

3. Select Software Update, and then press the E

button.

4. To download update software and update now, select Update now, and then press the E button. See "Update now" on the next page for details.

5. To let the product download update software automatically when available, select Auto update, and then press the E button. See "Auto update" on the next page for details.

| NOTES |

The upgrade is complete when the product turns off,



and then turns on again by itself. Samsung Electronics takes no legal responsibility for



product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade.

If you want to cancel the upgrade while the upgrade



software is downloading, press the E button. When a system upgrade is progress, "UPDATE" is



displayed on the front panel.

1. Select the Wi-Fi Direct device you want to connect to this product, and then press the E button.

2. The PIN pop-up appears.

3. Note the PIN code in the pop-up, and then enter it

into the appropriate field in the Wi-Fi Direct device you want to connect.

26 English

Page 27

Update now

Update by USB

You can use Update now to update the software through your network connection or by using a USB flash drive. The network instructions are below. The USB flash drive instructions are on this page.

1. Select Update now, and then press the E button. The Update now pop-up appears.

2. The product searches on line for the latest software version.

3. If it does not find an update, the "There are no new updates for you at the moment." pop-up appears. Press the E button to exit.

4. If it finds a new version, the Update Request popup appears.

5. Select OK. The product upgrades the software, turns off, and then turns on automatically.

6. If you do not select OK or Cancel in one minute, the product stores the new upgrade software. You can upgrade the software later using Auto update.

7. If you select Cancel, the product cancells the upgrade.

| NOTES |

When the system upgrade is done, check the



software details in the Product Information section of the Contact Samsung screen.

Do not turn off the product during the software



upgrade. It may cause the product to malfunction.

Auto update

You can set the Auto update function so that the product downloads new upgrade software when it is in Auto update mode.

In Auto update mode, the product is off, but its Internet connection is active. This allows the product to download upgrade software automatically, when you are not using it.

1. Press the ▲▼ buttons to select Auto update, and then press the E button.

2. Select On or Off. If you select On, the product will automatically download new upgrade software when it is in Auto update mode with the power off. If it downloads new upgrade software, the product will ask you if you want to install it when you turn the product on.

1. Visit www.samsung.com.

2. Click SUPPORT on the top right of the page.

3. Enter the product's model number into the search

field. As you enter the model number, a drop down will display products that match the model number.

4. Left click your product's model number in the drop down list.

5. On the page that appears, scroll down to and then click Firmware Manuals & Downloads.

6. Click Firmware in the centre of the page.

7. Click the ZIP button in the File column on the right

side of the page.

8. Click Send in the first pop-up that appears. Click OK in the second pop-up to download and save the firmware file to your PC.

9. Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file.

10. Copy the folder to a USB flash drive.

11. Make sure no disc is inserted in the product, and

then insert the USB flash drive into the USB port of the product.

12. In the product’s menu, go to Settings > Support > Software Update.

13. Select Update now.

14. The product searches for the software on the

USB drive. When it finds the software,the Update Request pop-up appears.

15. Select OK. The product upgrades the software, turns off, and then turns on automatically.

NOTES



There should be no disc in the product when you upgrade the software using the USB jack. When the system upgrade is done, check the software details in the Product Information section of the Contact Samsung screen. Do not turn off the product during the software upgrade. It may cause the product to malfunction. Software upgrades using the USB jack must be performed with a USB flash drive only.

Settings

| NOTES |

To use the Auto update function, your product must



be connected to the Internet.

English 27

Page 28

Media Play

Apps

Your home cinema can play content located on Blu-ray/ DVD/CD discs, USB devices, PCs, smart phones, tablets, and on the Web.

To play content located on your PC or a mobile device, you must connect the PC or mobile device and the product to your network. To play content on your PC, you must also download and install AllShare network software or already have DLNA network software on your PC.

| NOTES |

PCs running Windows 7 and Windows 8 have DLNA



software (Play To) built in.

The All Content Screen

For all media, the All Content screen or one of its sub screens is your primary means of accessing and playing contents saved on a variety of devices, either connected directly or using your network.

Using the All Content Screen

To access the All Content screen, select Photos, Videos & Music on the Home screen, and then press the E button.

Playing Commercial Discs

1. Press the  button to open the disc tray.

2. Place a disc gently into the disc tray with the disc’s

label facing up.

3. Press the  button to close the disc tray. Playback starts automatically.

4. If playback does not start automatically, press the

button on the remote or see “The All Content

Screen” above.

Method 1

1. Turn the product on.

2. Connect the USB device to the USB port on

the front panel of the product. The New Device Connected pop-up appears.

Movies & TV Shows

Add App Add App Add App Web Browser Settings

NOTES



If the pop-up does not appear, go to Method 2.

Apps Photos,

New device connected.

USB Flash Disk

Photos

Videos

Music

All Content

Videos &

Vide Music

3. Use the ▲▼ buttons to select Photos, Videos, Music or All Content, and then press the E

button. Depending on how the contents are arranged, you will see either folders, individual files, or both.

| NOTES |

Even though the product will display folders for all



content types, it will only display files of the Content Type you selected in Step 3. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the Photos, Videos & Music screen, and then going to Step 4 in Method 2 below.

4. If necessary, use the ▲▼◄► buttons to select a folder, and then press the E button.

5. Select a file to view or play, and then press the E button.

6. Press the RETURN button to exit a folder or the Exit button to return to the Home screen.

7. Go to pages 30~38 for instructions that explain how

to control playback of videos, music, and pictures on a USB device.

Method 2

Playing Files on a USB Device

There are two methods you can use to play or view multimedia files located on a USB device through your product.

28 English

1. Turn the product on.

2. Connect the USB device to the USB port on the

front panel of the product.

3. Select Photos, Videos & Music on the Home screen, and then press the E button.

Page 29

4. Select Photos, Videos, Music or All Content, and then press the E button. Depending on how the contents are arranged, you will see either folders, individual files, or both.

| NOTES |

Even though the product will display folders for all



content types, it will only display files of the Content Type you selected in Step 4. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the

Photos, Videos & Music screen and repeating Step 4.

5. Use the ◄► buttons to select the desired device

and then press the E button.

6. If necessary, use the ▲▼◄► buttons to select a folder, and then press the E button.

7. Press the RETURN button to exit a folder or the Exit button to return to the Home screen.

8. Go to pages 30~38 for instructions that explain how

to control playback of videos, music, and pictures on a USB device.

| NOTES |

If you insert a disc when playing a USB device



or phone, the device mode changes to "Disc" automatically.

If your cellular phone is DLNA compatible, you can



play contents without connecting a USB cable. See "Using the AllShare Network Function" on page 29.

Playing a Disc with User Recorded Content

You can play multimedia files you have recorded on Bluray, DVD, or CD discs.

1. Place a user recorded disc into the disc tray with the disc’s label facing up, and then close the tray. The Device Connected pop-up appears.

2. Use the ▲▼ buttons to select the type of content you want to view or play - Photos, Videos, or Music

- and then press the E button.

3. A screen appears listing the contents of the disc. Depending on how the contents are arranged, you will see either folders, individual files, or both.

4. If necessary, use the ▲▼◄► buttons to select a folder, and then press the E button.

5. Use the ▲▼◄► buttons to select a file to view or play, and then press the E button.

6. Press the RETURN button one or more times to exit a current screen, exit a folder, or to return to the Home screen. Press the Exit button to return directly to the Home Screen.

7. Go to pages 30~38 for instructions that explain how to control playback of videos, music, and pictures on a disc.

Using the AllShare Network Function

AllShare lets you play Photos, Videos, or Music located on your PC or your DLNA compatible device through the product using a wireless network connection.

To Download the AllShare Software

AllShare makes it easy to retrieve and enjoy media files from computers and DLNA-enabled devices. However, computers need to be installed with AllShare PC and mobile devices need to support AllShare. For more information, visit the Samsung Content & Service portal (http://link.samsung.com).

| NOTES |

You may experience compatibility issues when



attempting to play media files via a third-party DLNA server.

Media Play

| NOTES |

Even though the product will display folders for all



content types, it will only display files of the Content Type you selected in Step 2. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the Home screen and repeating Step 2.

English 29

Page 30

Media Play

DISC MENU TITLE MENU

MUTE

POPUP

FULL SCREEN REPEAT

HOME

Playing Content Located on Your PC or DLNA Device through the Product

Product

Play back

PC's files

AllShare Connection

1. Connect the product, your PC, and/or your DLNA

compatible device to the same wireless network.

2. Follow the directions in the AllShare software Installation/Instruction manual to set up devices and files for playing or viewing.

3. Select Photos, Videos & Music on the product's Home screen, and then press the E button. The

Photos, Videos & Music screen appears.

4. Select the type of content you want to play Photos, Videos, Music, or All Content - and then

press the E button.

5. On the next screen, select AllShare, and then press the E button.

6. In the list of AllShare connected devices that appears, select your PC or other AllShare compatible device, and then press the E button. A screen listing the available files appears.

7. Select the file you want to play or view, and then press the E button.

1. Connect the product, your PC, and your DLNA compatible cellular phone to the same wireless network.

2. Follow the directions in the AllShare software Installation/Instruction manual to set up devices and files for playing or viewing.

3. On your computer, using the AllShare software, confirm your phone is connected.

4. On the phone, select the file you want to view or play, and then select the home cinema system as the playback device.

5. On the phone, start playback.

Controlling Video Playback

You can control the playback of video content located on a Blu-ray/DVD disc, USB device, mobile device or PC. Depending on the disc or contents, some of the functions described in this manual may not be available.

Buttons on the Remote Control used for Video Playback

1 2

Controlling the Playback of Content Located on Your PC with Your Smart Phone

AllShare

Connection

Smart Phone

(Only available with Samsung phones supporting AllShare functionality.)

Product

Play back

PC's files

Control PC's files

to Product

Using the disc menu, title menu, popup menu and

title list

DISC MENU

TITLE

POPUP

During playback, press this button to display the Disc menu.

During playback, press this button to display the Title menu.

• If your disc has a playlist, press the View button to go to the playlist.

During playback, press this button to display the Popup menu.

30 English

Page 31

Playback related buttons

The product does not play sound in Search, Slow, or Step mode.

• To return to normal speed playback, press the 6 button.

Fast Motion

Play

Slow Motion

Play

Step Motion

Play

Starts playback.

Stops playback.

Pauses playback.

During playback, press the 3 or  button. Each time you press the 3 or  button, the playback speed will change.

In pause mode, press the  button. Each time you press the  button, the playback speed will change.

In pause mode, press the 7 button. Each time you press the 7 button, a new frame appears.

The screen may not display Chapter or Title



immediately. Continue to press the ▲▼ buttons until your choice is inside the applicable field.

To return to normal play, press the REPEAT button



again, press the ▲▼ buttons to select Off, and then press the E button.

The screen may not display Repeat A-B immediately.



Continue to press the ▲▼ buttons until Repeat A-B is inside the applicable field.

You must set point (B) at least 5 seconds of playing



time after point (A).

Using the TOOLS Menu

During playback, press the TOOLS button.

Play from the

beginning

Select to return to the beginning of the movie, and then press the E button.

Use 3D menu to select Side by Side or Top Bottom option if the 3D content currently playing does not properly appear in 3D mode.

Media Play

During playback, press the 1 or 2

Skip Motion

Play

Repeat Playback

1. During playback, press the REPEAT button on the

remote control.

2. Press the ▲▼ buttons to select Off, Title, Chapter,

All or Repeat A-B then press the E button.

❑

Repeat A-B

1. Press the E button at the point where you want

repeat play to start (A).

2. Press the E button at the point where you want

repeat play to stop (B).

3. To return to normal play, press the REPEAT button

again.

4. Press the E button.

| NOTES |

Depending on the disc, the screen may not display all



repeat options.

button. Each time you press the 1 or 2 button, the disc moves to the previous or next chapter or file.

Movie Note

Search Scene

| NOTES |

Use 3D menu only for 3D



contents of Side by Side or Top Bottom format. If applied to 2D contents, it may not be displayed properly.

Movie Note provides information such as director, cast, synopsis, etc.

- Movie Note is available if the disc includes Movie Note information and is connected to a network.

You can use the Search Scene function during playback to view or start a movie from the scene of your choice.

| NOTES |

If the index information in the file



is damaged or the file does not support indexing, you will not be able to use the Search Scene function.

If you are using the DLNA



function after connecting to a computer through your network, Search Scene may not be supported.

English 31

Page 32

Media Play

Search Titles

Chapter

Search Time

Bar

Repeat Mode

If there is more than one movie on the disc or device, select to start a different title.

1. Select Search Titles, and

then press the E button.

2. Use the ▲▼ buttons to select

a title, and then press the E button.

Select to play the chapter of your choice.

1. Select Chapter Search , and

then press the E button.

2. Use the ▲▼ buttons to select

a chapter, and then press the

button.

Select to play the movie from a selected time point.

1. Select Search Time Bar, and

then press the E button.

2. Using the number buttons,

enter the time point you want to go to, and then press the

button.

| NOTES |

You can also use the ◄►



buttons to advance or rewind the movie. The movie advances or rewinds one minute each time you press the ◄► buttons.

Select to repeat a title, chapter, or specific section.

- Off : Select to return to normal

playback.

- Title : Choose to repeat a

selected title.

- Chapter : Choose to repeat a

specific chapter.

- Repeat A-B : Choose to repeat

a specific section.

1. Press the ▲▼ buttons to

select repeat A-B, and then press the E button.

2. Press the E button at the

point where you want repeat play to start (A). Let the movie play.

Picture Mode

Equaliser

Mode

Equaliser

Settings

Audio

Audio Sync

Subtitle

Settings

3. Press the E button at the

point where you want repeat play to stop (B).

| NOTES |

You must set point (B) at least



5 seconds of playing time after point (A).

Select to set the picture mode.

- Dynamic : Increases sharpness

and brightness.

- Standard : Choose this setting

for most viewing applications.

- Movie : The best setting for

watching movies.

- User : Lets you adjust the

sharpness and noise reduction function respectively.

| NOTES |

When you use the BD wise



function, this menu will not appear.

Select to use the Equaliser.

Select to set the Equaliser.

| NOTES |

It only appears when equaliser



mode is on.

Select to set the desired audio language.

In some cases when the product is connected to a digital TV, the audio signal may not synchronize with the video signal. If this occurs, adjust the audio delay time to match the video signal.

Select to set the desired subtitle language.

- You can also operate this function by pressing the SUBTITLE button on the remote control.

Select to set the desired subtitle options.

32 English

Page 33

To view a scene from another

DISC MENU TITLE MENU

809

POPUP

RDS DISPLAY TA

PTY- PTY+PTY SEARCH

Angle

BONUSVIEW

Video

BONUSVIEW

Audio

Full Screen

Information

| NOTES |

Depending on the disc or storage device, the Tools



menu may differ. Video files with high bit rates of 20Mbps or more strain



the product’s capabilities and may stop playing during playback.

angle. The Angle option displays the number of angles available to view (1/1, 1/2, 1/3, etc.).

Select to set the desired bonusview option.

Select to set the size of the video image. Choose Original, Mode1 (larger), or Mode2 (largest).

Select to view video file information.

Using the View & Options Menus

On the screen that lists the video files, use the ▲▼◄► buttons to select View or Options in the upper right, and then press the E button.

Select Send to upload selected files to apps (Picasa, Facebook etc) or devices.

Send

| NOTES |

Depending on the disc or storage device, the Options



View menus may differ. All options may not be displayed.

The View and Options menus are usually available



when you are viewing video files on a USB flash drive, a PC, a disc you recorded yourself, or a mobile device. They are usually not available if you are viewing a commercial Blu-ray, DVD, or CD disc.

To use Send, you need to establish an account with the on-line site, and then log in using the Log In function.

Controlling Music Playback

You can control the playback of music content located on a DVD, CD, USB, mobile device or PC. Depending on the disc or contents, some of the functions described in this manual may not be available.

Buttons on the Remote Control used for Music Playback

Media Play

View

Options

Videos

Date

Displays all the folders with videos by date. If you select a folder, and then press E button, displays all the videos in the folder by date.

Displays all the video files on

Title

Folder

Play

Selected

the media or storage device by title.

Displays all the folders on the media or storage device.

Play Selected lets you create a playlist by selecting specific files to play. It works essentially the same way for all media. See Creating a Playlist from a CD on page

35.

NUMBER buttons : If numbered tracks are displayed, press the number of a track. The

selected track is played.

buttons : Move to the previous/next

1 2

track.

button : Stops a track.

5 6

English 33

Page 34

Media Play

Fast Play (Audio CD (CD-DA) only)

During playback, press the 3 or  button.

Each time you press the 3 or  button, the playback speed will change.

button : Pause a track.

button : Plays the currently selected track.

Music Screen Controls

TRACK 001 00:43

TRACK 002 03:56

TRACK 003 04:41

TRACK 004 04:02

TRACK 001

00:09 00:43

offoff

Pause a track.

TRACK 005 03:43

TRACK 006 03:40

TRACK 007 04:06

TRACK 008 03:52

TRACK 009 03:04

TRACK 010 04:02

Options

Using the View & Options Menus

On the screen that lists the music files, use the ▲▼◄► buttons to select View or Options in the upper right, and then press the E button.

Music

Displays all the music

View

Track

Album

Artist

Genre

Folder

tracks on the media or storage device.

Displays all the music on the media or storage by album.

Displays all the music files on the media or storage device by artist

Displays all music on the media or storage by genre.

Displays all the folders on the media or storage device.

Play a track.

Move to the previous track.

Move to the next track.

Rewind the track.

Advance the track.

Repeat one track or all tracks.

Play tracks in random order.

Display the Equaliser.

Adjust the equaliser manually. (Only when equaliser mode is on)

To access the controls, play a track, and then use the ▲▼◄► buttons to move to the control of your choice.

| NOTES |

The Music Screen controls are only accessible when a



track is playing. All controls do not appear at the same time.



Options

Play

Selected

Send

Ripping

Information

Play Selected lets you create a playlist by selecting specific files to play. It works essentially the same way for all media. See Creating a Playlist on an Audio CD on page 35.

Select Send to upload selected files to apps (Picasa, Facebook etc) or devices. To use Send, you need to establish an account with the on-line site, and then log in using the Log In function.

The Ripping function converts CD audio to the mp3 format and saves the converted files on a USB device or the mobile device connected to the product. See Ripping on page 35.

Select to see content information.

34 English

Page 35

Encoding

Select to manage the text encoding options.

| NOTES |

Depending on the disc or storage device, the Options



menu may differ. All options may not be displayed.

5. To remove a track from the list, move to the track, and then press the E button again.The check on the track is removed.

6. When done, press the  buttons to select Play, and then press the E button. The Music Playback screen reappears listing only the tracks you checked. The selected tracks play automatically.

Media Play

Repeating Tracks on an Audio CD

You can set the product to repeat tracks on an audio CD (CD-DA/MP3).

1. During playback, use the ▲▼◄► buttons to select in the lower left corner of the screen, and then

press the E button.

2. Use the ▲▼ to select the Repeat mode you want

- Off, One Song, or All - and then press the E button.

Options

TRACK 001 00:43

TRACK 002 03:56

TRACK 003 04:41

TRACK 004 04:02

TRACK 001

00:09 00:43

offoff

TRACK 005 03:43

TRACK 006 03:40

TRACK 007 04:06

TRACK 008 03:52

TRACK 009 03:04

TRACK 010 04:02

Shuffling Tracks on an Audio CD

You can set the product to play tracks on an audio CD (CD-DA/MP3) at random.

1. During playback, use the ▲▼◄► buttons to select

in the lower left corner of the screen, and then

press the E button.

2. Use the ▲▼ to set the Shuffle mode Off or On, and

then press the E button.

Creating a Playlist from a CD

1. With the Playback screen displayed, select the

Options button and then press the E button. The

Options menu appears.

2. Use the  buttons to select Play Selected , and

then press the E button. The Play Selected screen appears.

3. Use the  buttons to select a track, and then

press the E button. A check appears to the left of the track.

4. Repeat Step 3 to select and check additional tracks.

| NOTES |

You can create a playlist with up to 99 tracks from



Audio CDs (CD-DA). If you have created a playlist, Play Selected is



replaced by Edit playlist on the Options menu. On the Play Selected screen, you can also choose



Select All, Deselect All, and Cancel.

Use Select All to select all tracks. This cancells

your individual track selections. When you press the RETURN button on your remote or select Play and then press the E button, all tracks will appear on the Music Playback screen, and the product will begin to play all tracks from Track 001.

Use Deselect All to deselect all selected tracks at

once. Then, select individual tracks or use Select All to select all the tracks, and then press the

RETURN button on your remote or select Play and

then press the E button. If you do not use Select All or select individual tracks, the Playlist will not change.

Cancel cancells any changes you made on the Play

Select screen. When you return to the Playback screen, the Playlist will be unchanged.

Ripping

1. Insert a USB device into the USB jack on the front

of the product.

2. With the Playback screen displayed, select the Options button and then press the E button.

The Options menu appears.

3. Use the ▲▼ buttons to select Ripping, and then press the E button. The Ripping screen appears.

4. Use the ▲▼ buttons to select a track, and then press the E button. A check appears to the left of the track.

5. Repeat Step 4 to select and check additional tracks.

6. To remove a track from the list, move to the track,

and then press the E button again. The check on the track is removed.

7. When done, select the Rip button using the ▲▼ buttons, and then press the E button. The Rip pop-up appears.

English 35

Page 36

Media Play

8. Use the ▲▼ buttons to select the device to store the ripped files on, and then press the E button.

| NOTES |

Do not disconnect the device while ripping is in



progress.

9. If you want to cancel ripping, press the E button and then select Yes. Select No to continue ripping.

10. When ripping is complete, the “Successfully ripped.” message appears. Press the Ebutton.

11. Press the RETURN button to go back to the Playback screen.

| NOTES |

This function is not available with DTS Audio CDs.



This function may not be supported by some discs.



Ripping encodes music to the .mp3 format at



192kbps. On the Ripping screen, you can also choose Select



All or Clear All.

- Use Select All to select all tracks and press the E button. This cancells your individual track selections.

- Use Clear All to deselect all selected tracks at once.

Using Bluetooth

You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!

What is Bluetooth?

Bluetooth is a technology that enables Bluetoothcompliant devices to interconnect with each other easily using a short wireless connection.

• A Bluetooth device may hum or malfunction:

- When a part your body is in contact with the receiving/transmitting system of the Bluetooth device or the Home Cinema.

- When it is subject to electrical variation from obstructions caused by a wall, corner or office partitioning.

- When it is exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens and wireless LANs.

• Pair the Home Cinema with the Bluetooth device while the two are close together.

• The further the distance is between the Home Cinema and the Bluetooth device, the worse the quality is. If the distance exceeds the Bluetooth operational range, the connection is lost.

• In poor reception-sensitivity areas, the Bluetooth connection may not work properly.

• The Home Cinema has an effective reception range of up to 10 meters in all directions if there are no obstacles. The connection will be automatically cut off if the device is out of this range. Even within this range, the sound quality may be degraded by obstacles such as walls or doors.

• This wireless device may cause an electric interference during its operation.

To connect the Home Cinema to a Bluetooth device

Connect

Bluetooth device

Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.

1. Press the FUNCTION button on the remote control

of the product to display the BT message.

2. Select the Bluetooth menu on the Bluetooth device

you want to connect. For instructions, refer to the Bluetooth device's manual.

3. Select the Stereo headset menu on the Bluetooth

device.

• You will see a list of devices.

4. Select "[HTS]Fxxxxx" from the searched list.

• When the Home Cinema is connected to the Bluetooth device, the device name of the connected Bluetooth device, followed by the name of home cinema will appear on the front display of home cinema.

5. Play music on the connected device.

• You can listen to the music playing on the connected Bluetooth device over the Home Cinema system.

36 English

Page 37

| NOTES |

The Home Cinema only supports Middle Quality SBC



data (up to 237kbps@48kHz), and does not support High Quality SBC data (328kbps@44.1kHz).

The AVRCP feature is supported. It's functionality



will differ, depending on the specifications of the connected device.

Connect only to a Bluetooth device that supports the



A2DP Profile. Only one Bluetooth device can be paired at a time.



The search or connection functions may not work



properly in the following cases:

- If there a strong electric field near or around the home cinema.

- If several Bluetooth devices are simultaneously paired with product.

- If the Bluetooth device is turned off, not in place, or malfunctions.

- Note that such devices as microwave ovens, wireless LAN adapters, fluorescent lights, and gas stoves use the same frequency range as the Bluetooth device, and can cause electric interference.

To disconnect the Bluetooth device from the Home Cinema

You can disconnect the Bluetooth device from the Home Cinema. For instructions, refer to the Bluetooth device's manual.

• When the Home Cinema is disconnected from the Bluetooth device, the Home Cinema will display DISCONNECTED on the front display.

In Bluetooth mode, the screen saver will start if



the Bluetooth device stays in the Ready state for 5 minutes. To reconnect the Bluetooth device, turn off the screen saver, and then connect the device. To turn off the Screen saver, press any button on the remote control (the Volume button, a number button, etc.)

Playing Photo Contents

You can play photo contents located on a DVD, USB, mobile device or PC.

Using the Tools Menu

During playback, press the TOOLS button.

Start / Stop

Slide Show

Slideshow

Settings

Zoom

Rotate

Select to move the previous picture.

Select to move the next picture.

Select to play/pause the slide show.

Speed : Select to set a slide

show's speed.

Effects : Select to set a slide

show's special effects.

Select to enlarge the current picture. (Enlarge up to 4 times)

Select to rotate the picture. (This will rotate the picture either clockwise or counter clockwise.)

Media Play

To disconnect the Home Cinema from the Bluetooth device

Press the ( ) button on the front panel of the Home Cinema to switch from BT to another mode or turn off the Home Cinema.

• Except when you disconnect the home cinema by changing functions, the connected Bluetooth device will wait a certain time for a response from the Home Cinema before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device.)

| NOTES |

In Bluetooth connection mode, the Bluetooth



connection will be lost if the distance between the Home Cinema System and the Bluetooth device exceeds 10 meters. When the Bluetooth device comes back into effective range or you restart the Bluetooth device, you have to pair the device and home cinema again to reconnect.

Background

Music

Settings

Equaliser

Mode

Select to listen to music while viewing a slide show.

Picture Mode

- Dynamic : Choose to increase Sharpness.

- Standard : Choose for most viewing applications.

- Movie : This is the best setting for watching movies.

- User : Lets you adjust the sharpness and noise reduction function respectively.

Information : Shows the picture

information.

Customize your own personal sound preferences using the equaliser settings.

English 37

Page 38

Media Play

Equaliser

Settings

| NOTES |

Depending on the disc or storage device, the Options



menu may differ. All options may not be displayed. To enable the background music function, the photo



file must be in the same storage media as the music file. However, the sound quality can be affected by the bit rate of the MP3 file, the size of the photo, and the encoding method.

You can't enlarge the subtitle and PG graphic in the



full screen mode.

This function is only available when

Equaliser Mode is On.

Using the View and Options Menus When you See the Photo File List

Photos

Groups all the photo files on the media or storage

Date

View

Title

Folder

Slide Show

Options

Play

Selected

device by Date. Click a group to see the photos in that group.

Displays all the photo files on the media or storage device by title.

Displays all the folders on the media or storage device.

Starts the slide show. Shows all the files in the current folder, one after another. If you want to create a slide show with a selected group of photos, see Play Selected below.

Play Selected lets you create a playlist by selecting specific files to play. It works essentially the same way for all media. See Creating a Playlist on an Audio CD on page 35.

Select Send to upload selected files to on line sites (Picasa, Facebook etc) or devices. To use

Send

| NOTES |

Depending on the disc or storage device, the Options



menu may differ. All options may not be displayed.

Send, you need to establish an account with the on-line site, and then log in using the Log In function.

Listening to Radio

Using Buttons on the Remote Control

1. Press the FUNCTION button to select FM.

2. Tune to the desired station.

• Preset Tuning 1 : Press the MANUAL/PRESET button to select Preset and then press the TUNING/CH ( station.

- Before you can tune to preset stations, you must add preset stations to the product's memory.

• Manual Tuning : Press the MANUAL/PRESET button to select Manual and then press the TUNING/CH ( higher frequency.

• Automatic Tuning : Press the MANUAL/PRESET button to select Manual and then press and hold the TUNING/CH ( search the band.

Setting Mono/Stereo

Press the MO/ST button.

• Each time the button is pressed, the sound switches between STEREO and MONO.

• In a poor reception area, select MONO for a clear, interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 into memory.

1. Press the FUNCTION button to select FM.

2. Press the TUNING/CH (

<89.10>.

) button to select the preset

) button to tune to a lower or

) button to automatically

) button to select

38 English

Page 39

3. Press the TUNER MEMORY button.

• NUMBER flashes on the display.

4. Press the TUNER MEMORY button again.

• Press the TUNER MEMORY button before NUMBER disappears from the display on its own.

• After you press the TUNER MEMORY button, NUMBER disappears from the display and the station is stored in memory.

5. To preset another station, repeat steps 2 to 4.

• To tune to a preset station, press the MANUAL/ PRESET button to select Preset and then press the TUNING/CH ( preset station.

) button to select the

About RDS Broadcasting

Using the RDS (Radio Data System) to receive FM stations

To show the RDS signals

You can see the RDS signals the station sends on the display.

Press the RDS DISPLAY button while listening to an FM station.

• Each time you press the button, the display change to show you the following information : PS NAME  RT CT  Frequency

(Program

Service)

(RadioText)

Frequency

While searching, <PS NAME> appears and then the station names will be displayed. <NO PS> appears if no signal is sent.

While searching, <RT> appears and then text messages the station sends will be displayed. <NO RT> appears if no signal is sent.

Station frequency (non-RDS service)

Media Play

RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.

When tuned to an FM station which provides the RDS service, the RDS indicator lights up on the display.

Description on RDS function

• PTY (Program Type) : Displays the type of program currently being broadcast.

• PS NAME (Program Service Name) : Indicates the name of broadcasting station and is composed of 8 characters.

• RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed of maximum 64 characters.

• CT (Clock Time) : Decodes the real time clock from the FM frequency. Some stations may not transmit PTY, RT or CT information therefore this may not be displayed in all cases.

• TA (Traffic Announcement) : TA ON/OFF it shows that the traffic announcement is in progress.

| NOTES |

RDS may not operate correctly if the station tuned is



not transmitting RDS signal properly or if the signal strength is weak.

About characters shown in the display

When the display shows PS,or RT signals,the following characters are used.

• The display window cannot differentiate upper case and lower case letters and always uses upper case letters.

• The display window cannot show accented letters, <A,> for instance, may stands for accented <A’s> like <À, Â, Ä, Á, Å and Ã.>

PTY (Program Type) indication and PTY-SEARCH function

One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes.

To search for a program using the PTY codes

❑

Before you start!

• The PTY Search is only applicable to preset stations.

• To stop searching any time during the process, press

button while searching.

• There is a time limit in doing the following steps. If the setting is cancelled before you finish, start from step 1 again.

• When pressing the buttons on the primary remote control, make sure that you have selected the FM station using the primary remote control.

English 39

Page 40

Media Play

RDS DISPLAY TA

PTY- PTY+PTY SEARCH

3D Sound

1. Press the PTY SEARCH button while listening to an FM station.

2. Press the PTY- or PTY+ button until the PTY code you want appears on the display.

• The display gives you the PTY codes described

to the right.

3. Press the PTY SEARCH button again, while the PTY code selected in the previous step is still on the display.

• The centre unit searches 15 preset FM stations,

stops when it finds the one you have selected, and tunes in that station.

Using the Special Effects Remote Control Buttons

SOUND

SOUND EFFECT Function

Lets you select a mode that optimizes the sound.

1. Press the SOUND EFFECT button.

2. Press the ▲▼ buttons to select the desired mode: DSP or Sound Mode.

3. Press the ◄► buttons to select the desired

sound effect.

❑

DSP

MP3 Enhancer  Power Bass  Football  Off

• MP3 Enhancer : Helps enhance your sound

experience (ex. mp3 music). You can upscale your MP3 level sound (24 kHz, 8bit) to CD level sound (44.1 kHz, 16bit).

• Power Bass : Increases the volume level of bass

tones and provides thudding sound effects.

• Football : Creates a more dynamic, realistic, stadium

like sound. For listening to football, soccer, and other sporting events.

• Off : Select for normal listening.

❑

Sound Mode

Virtual Sound  Music  News  Drama  Cinema

Sports  Game  Off



EFFECT

You can enjoy more natural and vivid surround sound with enriched tones by adjusting the depth of sound using the level options.

Off  High  Low

| NOTES |

3D Sound is not available in FM mode.



TV SOUND

TV Sound

You can listen via Home theatre speakers or TV Speaker with TV SOUND button.

1. Connect the HDMI cable to TV and Home

cinema. (See page 16)

2. Set the connected Home cinema and TV to Anynet+ (HDMI-CEC) On.

3. Press the TV SOUND button on the remote

control.

4. Each time you press the TV SOUND button, TV SOUND ON/OFF flashes shortly on the Display

part on the Front panel, then change to D. IN.

- TV SOUND ON : Output to Home theatre speakers.

- TV SOUND OFF : Output to Anynet+ connected TV Speaker.

❑

Use in this case:

1) If you want to listen to the sound via home cinema speaker when you watch a TV.

2) If you want to listen to the sound from the USB media that plugged to the TV via home cinema speaker.

❑

TV SOUND ON/OFF support specification

Connected TV

Anynet+

(HDMI-CEC)

supported TV

Anynet+

(HDMI-CEC) not

supported TV

Anynet+

(HDMI-CEC)

Setting

ON O O

OFF O X

No operation O X

Sound

OFF

40 English

Page 41

Network Services

You can enjoy various network services such as streaming video or on-line apps by connecting the product to your network.

To use network services, you must first:

1. Connect the product to the network. (See page 17)

2. Configure the network settings. (See pages 23~25)

Logging In to Your Samsung Account

Before you access Movies & TV Shows or Apps, we suggest you log in to your Samsung account.

To log in to your Samsung account, follow these steps:

1. With the Home screen displayed, press the RED (A) button. The Log In screen appears.

2. Select the Email field, and then press the E button. The keyboard pop-up appears.

3. Using the keyboard, enter your e-mail address. When finished, select the Done button, and then press the E button. The Log In screen re-appears.

4. Select the Password field, and then press the E button. The keyboard pop-up appears.

5. Using the keyboard, enter your password. When finished, select the Done button, and then press the

button. The Log In screen re-appears.

6. To make the log in process easier next time, select Sign me in automatically, and then press the E

button.

7. Select Log in, and then press the E button. The product logs you in to your account. Your account e-mail is displayed on the bottom left of the screen.

| NOTES |

If you selected Sign me in automatically, the next



time you log in, the product will automatically enter your e-mail and password. All you need to do is select Log In.

If your e-mail address and password are not displayed



when the Log In screen appears, select the button with the down pointing arrow head next to the Email field, and then press the E button. A drop down list of all your registered accounts will appear. Select your account, and then press the E button. The product will fill in the e-mail and password fields.

If you press the RED (A) button after you have logged



in, the My Account pop-up appears. On the pop-up, you can select Logout, Change Account Information, Link Service Accounts, Remove Accounts from the Device, and Deactivate Account.

To rent movies and purchase for pay apps,you must



have a credit card registered in your account. If you haven’t registered a card, select Change Account Information. On the Change Account information page, select Register Card, press the E button, and then follow the directions on the screen.

Before Using Movies & TV Shows or Apps

If you haven’t set up Smart Hub, when you use Movies & TV Shows or Apps for the first time, the product will ask you to perform the Smart Hub set up procedure.

1. On the Home screen, select either Movies & TV Shows or Apps, and then press the E button. If you have selected Apps, go to Step 4.

2. If you selected Movies & TV Shows, the Smart Hub

pop-up appears asking if you want to set up Smart Hub. Select Yes, and then press the E button. The Welcome screen appears.

3. Select Start, and then press the E button. The Smart Hub Terms & Conditions, Privacy Policy screen appears.

4. On the Smart Hub Terms & Conditions, Privacy Policy screen, you must review and agree to both the Smart Hub Terms and Conditions and the Privacy Policy to use Smart Hub.

5. Scroll down, and then click the View Details buttons to review the full documents.

6. When done reading, scroll up to the first entry field, and press the E button to agree to the Terms and Conditions and consent to the Privacy Policy.

7. Press the ► button twice to go to the Supplemental Privacy Notices screen.

8. Click the View Details button to view the entire notice.

9. When done reading, scroll up to the top entry field, and then press the E button.

| NOTES |

You do not need to consent to the Supplemental



Privacy Notice, but one or more Smart TV features or functionalities may not be available if you do not.

10. Press the ► button twice. The Setup Complete screen appears. Press the E button.

Network Services

English 41

Page 42

Network Services

Using Movies & TV Shows

You can download or stream for pay and free-of-charge movies and TV shows and view them on your TV.

Movies & TV Shows

Featured Recommended

Favourites

1. On the Home screen, select Movies & TV Shows, and then press the E button.

2. Select one of the Featured or Recommended movies, and then press the E button. The page for that movie appears.

Use the ▼ button to go to the bottom of the screen. Select Favourites, Featured, Movies, TV Shows, or Purchased, and then press the E button.

On the page that appears, use the ▲▼◄► buttons to select a show or movie, and then press the E button.

On the TV Shows or Movies screen, you can also select What's New?, Most Popular, or Genres to see more available shows or movies. On the Genre screen, use the ▲▼◄► buttons to select a Genre, and then press the E button.

To make a selection on a page displaying TV shows or movies, use the ▲▼◄► buttons to make a selection, and then press the E button.

3. To watch a selection, select Watch Now, and then press the E button. A selection screen appears listing various locations from which you can rent the film along with prices.

4. Select a location, and then press the E button. Follow the directions on the screen to start the movie.

| NOTES |

If you haven't logged into your Samsung account,



the Log in screen will appear after Step 3 and you will need to log in.

Featured Movies TV Shows Purchased

If you don't have a credit card associated with your



Samsung account, after you log in, the Register Card screen will appear. Follow the directions on the screen. You must have a credit card registered to your account to rent movies and to purchase for-pay apps.

Using Apps

You can download the applications from the Internet, and access various for pay or free-of-charge application and view them on your TV. To access some applications, you need to have a Samsung account.

The Apps Screen at a Glance

Apps

Recommended

2 3 4 5

My Apps

Web Browser

Apps Apps

More Apps

Samsung

Recommended : Displays recommended contents managed by Samsung.

Gives you access to various for pay or free-ofcharge applications you can download.

Featured Applications : Use the ▲▼◄► buttons to highlight the displayed Feature Application, and then press the E button. Information about the featured application appears.

My Apps : Displays your personal gallery of applications modifiable on the More Apps screen.

More Apps : Select More Apps to access the More Apps screen where you can add to, modify, and delete applications and see all downloaded applications.

42 English

Page 43

Downloading Applications

Starting an Application

You can download for pay or free-of-charge applications through Samsung Apps.

1. On the Apps screen, select Samsung Apps, and then press the E button. The Samsung Apps screen appears.

2. Across the top of the screen, under What's New?, you'll see a series of new apps. Use the

◄► buttons to scroll the list right or left, and then select an app. Press the E button to see more information about the app. If the app is free, select Download, and then press the E button to download the app. If it is a for-pay app select Buy, press the E button, and then follow the instructions on the screen.

| NOTES |

To buy an app, you must be logged into your



Samsung account and have a credit card registered to the account. Press the RED (A) button on your remote to log in.

If you haven’t registered a card, after you log in, press



the RED (A) button again, and then select Change Account Information in the pop-up that appears. On the Change Account information page, select Register Card, press the E button, and then follow the directions on the screen.

You can also access and download apps from



the categories listed on the left of the screen. For instructions, see Step 4.

3. After the app has downloaded, select Run, and then press the E button to run the app now. To run the app later, press the RETURN button. In either case, the icon for the app will appear on the Apps screen.

4. To see additional apps, use the ▲▼◄► buttons to move to the category list on the left side of the screen.

5. Use the ▲▼ buttons to select a category. Each time you move the highlight to another category, a different set of applications appears on the right.

6. Use the ► button to move to the applications and the ▲▼◄► buttons to move from app to app.

7. To see more information about an app, select it, and then press the E button.

8. To download the app, follow the directions in Steps 2 and 3.

1. Select Apps on the Home screen, and then press the E button.

2. On the Apps screen, use the ▲▼◄► buttons to select an app, and then press the E button. The app starts.

Using the More Apps Screen

More Apps

WebBrowser

Samsung Apps

WebBrowser

Category : XXXXX | Version : X.XXX | Size : XX.XKB

The More Apps Screen lists all the apps you have downloaded and lets you:

• Sort the apps on the More Apps screen by Date

Downloaded, Recently Opened, and Title.

• Apply a number of Options Menu functions to the

apps listed in the My Apps section of the Apps screen including updating apps, moving apps into a folder, deleting the apps from My Apps, and locking the apps.

• Start apps.

View : Date Downloaded Options

1 /23

Storage

109.48 MB / 629.43 MB

Sorting the Apps

To sort the apps on the More Apps screen, follow these steps:

1. On the Home screen, select Apps, and then press the E button.

2. On the Apps screen, use the ▼ button to move to the More Apps hotspot at the bottom of the page, and then press the E button.

3. On the More Apps screen, use the ▲► buttons to move to View at the top of the screen, and then press the E button.

4. In the drop down that appears, select Date Downloaded, Recently Opened, or Title, and then

press the E button. The apps on the More Apps screen are sorted by the criteria you have chosen.

Network Services

English 43

Page 44

Network Services

Using the Options Menu Functions

Lock/Unlock

Using the Lock/Unlock function and the Security PIN, you can lock applications so they cannot be started on either the Apps screen or the More Apps screen. The default PIN is 0000.

1. On the More Apps screen, use the ▲► buttons to go to Options at the top of the screen, and then press the E button.

2. Select Lock/Unlock, and then press the E button.

3. When the Lock Service appears, enter the PIN using the number buttons on your remote control.

4. To lock an application, select the application, and then press the E button. A lock appears on the app. Repeat to lock other, individual apps.

5. To unlock a locked app, select the application, and then press the E button.

6. To lock all the apps at once, use the ▲► buttons to select the Lock All button, and then press the E button.

7. To unlock all the locked apps at once, use the ▲► buttons to select the Unlock All button and then press the E button.

8. Press the RETURN button twice to return to the Apps screen. Locked apps will display a lock on the upper right side.

Edit My Apps

Delete an App from My Apps

1. On the More Apps screen, use the ▲► buttons to

go to Options at the top of the screen, and then press the E button.

2. Select Edit My Apps, and then press the E button. The Edit My Apps screen appears.

3. Select the app you want to delete from My Apps, press the E button, and then press the ▲▼◄► buttons in the direction of the The Remove from My Apps pop-up appears.

4. Select Ye s, and then press the E button.

5. When you return to the Apps screen, the app will

have been removed from the My Apps area.

Move an App in My Apps

1. On the More Apps screen, use the ▲► buttons to

go to Options at the top of the screen, and then press the E button.

2. Select Edit My Apps, and then press the E button. The Edit My Apps screen appears.

3. Select the app you want to move in My Apps, press the E button, and then press the ▲▼◄► buttons to move the app icon in the direction of one of the arrows (<, >, ^, etc.) that appears around the app icon. The app icon moves in the direction you have chosen.

4. After you have placed the app icon where you want, press the E button.

5. When you return to the Apps screen, the app will be positioned in the location you had selected.

Edit My Apps lets you add apps to and delete apps from My Apps. It also lets you change the position of an app in My Apps.

Add an App to My Apps

1. On the More Apps screen, use the ▲► buttons to

go to Options at the top of the screen, and then press the E button.

2. Select Edit My Apps, and then press the E button. The Edit My Apps screen appears.

3. Select a full colour app from the top row of apps, and then press the E button. The full colour app icon appears in the My Apps area below and the app icon in the top row is grayed out.

| NOTES |

Grayed out apps are already in My Apps.



4. When you return to the Apps screen, the app will appear in the My Apps area.

Create Folder

Create Folder lets you create a folder on the More Apps screen into which you can put apps.

1. On the More Apps screen, use the ▲► buttons to go to Options at the top of the screen, and then press the E button.

2. Select Create Folder, and then press the E button. The Set Folder Name pop-up appears.

3. Press the E button. The keyboard appears.

4. Select the Clear button on the right side, and then

press the E button to remove Folder 1 from the entry field. Then, using the keyboard, enter the name you want to apply to the folder.

5. When finished, select the Done button on the right side, and then press the E button. The pop-up reappears.

6. Select OK, and then press the E button. The new folder appears in the list of apps on the left side of the screen.

44 English

Page 45

Move to Folder

Move to Folder lets you move apps to the folder of your choice.

1. On the More Apps screen, use the ▲► buttons to go to Options at the top of the screen, and then press the E button.

2. Select Move to Folder, and then press the E button. The Move to Folder screen appears.

3. Use the ▲▼◄► buttons to move to an app, and then press the E button to select the app. A check appears in the upper left corner of the app.

4. To deselect an app, press the E button. The check disappears.

5. Repeat Step 3 to select additional apps.

| NOTES |

To select all the downloaded apps, select Select All



at the top right of the screen, and then press the E button. To deselect all the apps, select Deselect All at the top right of the screen, and then press the E button.

6. When done, select Select folder at the top of the screen, and then press the E button. The Select Folder pop-up appears.

7. In the Select Folder pop-up, use the ▲▼ buttons to select the folder you want to move the apps you selected to, and then press the E button.

8. The Apps Moved pop up appears. Press the E button.

9. To open the folder, use the ▲▼◄► buttons to highlight the folder, and then press the E button.

Rename Folder

Rename Folder lets you rename an existing folder.

1. On the More Apps screen, use the ▲► buttons to go to Options at the top of the screen, and then press the E button.

2. Select Rename Folder, and then press the E button. The Rename Folder screen appears, and a folder is highlighted.

3. User the ▲▼◄► buttons to highlight a folder of your choice, and then press the E button. The Rename pop-up appears.

4. Press the E button. The keyboard appears.

5. Enter the new name for the folder. When finished,

select Done on the right side, and then press the E button. The Rename popup reappears displaying the new name.

6. Select OK, and then press the E button. The

folder is renamed.

7. Select Close on the right side of the screen, and

then press the E button.

Delete

Delete lets you delete apps and folders from the My Apps screen. If there are apps in a folder, both the folder and the apps are deleted together. Delete removes apps permanently. If you decide you want to use an app you deleted, you will need to download it again.

1. On the More Apps screen, use the ▲► buttons to go to Options at the top of the screen, and then press the E button.

2. Select Delete, and then press the E button. The Delete screen appears.

3. Use the ▲▼◄► buttons to move to an app, or folder and then press the E button to select. A check appears in the upper left corner of the app or folder you selected.

4. To deselect an app, press the E button. The check disappears.

5. Repeat Step 3 to select additional apps or folders.

| NOTES |

To select all the downloaded apps, select Select All



at the top right of the screen, and then press the E button. To deselect all the apps, select Deselect All at the top right of the screen, and then press the E button.

6. After you have made all your selections, select Delete at the top of the screen, and then press the

button. The deleting pop-up appears.

7. Select Ye s, and then press the E button. All the apps you selected are deleted.

| NOTES |

You cannot immediately delete a locked app or



folder. If you select a locked app or folder to delete, when you perform Step 7, the Lock Service pop-up appears. Enter the Security PIN into the pop-up, and then press the E button. The lock will be released and the app or folder will be deleted.

Network Services

English 45

Page 46

Network Services

Update Apps

When the application require to update to the latest version, select Apps and then select More Apps. On the More Apps screen, select Update Apps, and then select application from the list. The application starts updating to the latest version. However, Update Apps appears on the screen only when the update is required.

Screen Mirroring

The Screen Mirroring function lets you view the screen of your smart phone or smart device on the TV you have connected to the home cinema system.

1. With the Blu-ray's Home screen displayed, press the BLUE (D) button on the remote. The Screen Mirroring screen appears.

2. Launch AllShare Cast on your device.

3. On your device, find the name of the home cinema

system in the list of available devices and then select it.

4. The TV displays a connecting message (for example, Connecting to Android_92gb...) and then displays the connected message.

5. In a few moments, the screen of your device appears on the TV screen.

| NOTES |

When you are using the Screen Mirroring function,



video stuttering or audio dropouts may occur, depending on your environment.

You can connect to a device that supports AllShare



Cast. Note that connecting to such a device may not be fully supported depending on the manufacturer. For further information on mobile connection support, refer to the manufacturer’s web site.

Bluetooth transmissions can interfere with the Screen



Mirroring signal. Before using the Screen Mirroring function, we strongly recommend that you turn off the Bluetooth function on your smart phone or smart device.

Using the Web Browser

You can access the Internet using the Web Browser application.

Select Web Browser on the Home screen, and then press the E button.

| NOTES |

When you run the Web Browser with the product



connected by HDMI to a BD Wise compatible TV and BD Wise is on - the browser is maximized to fill the screen and the TV's resolution is set to the optimal resolution automatically.

The Web Browser is not compatible with Java



applications. If you attempt to download a file, and the file cannot



be saved, an error message will appear. E-commerce (purchasing products online) is not



supported. ActiveX is not supported.



Access may be blocked to some websites or to web



browsers operated by certain businesses.

Link Browsing and Pointer Browsing

The Web Browser provides two types of browsing, Pointer Browsing and Link Browsing. When you launch the browser for the first time, Pointer Browsing is active. If you are using a mouse to navigate in the Web Browser, we recommend leaving Pointer Browsing active. If you are using your remote to navigate in the Web Browser, we recommend that you replace Pointer Browsing with Link Browsing. Link Browsing moves a highlight from one link to the next in the Web Browser and is much faster than Pointer Browsing if you are using your remote.

To activate Link Browsing, follow these steps:

1. Use the ▲▼◄► buttons on your remote to move

the pointer to the Link Browser icon on the top right of the screen. The Link Browser icon is the third icon from the right. The pointer will be in the correct position if the icon turns blue and the words “Link Browsing” appear on the screen.

2. Press the E button. Link Browsing is activated

and will remain active whenever you bring up the Web Browser.

46 English

Page 47

The Control Panel at a Glance

Using the Keyboard Pop-up

The Control Panel, which runs across the top of the screen, has a series of icons which start a number of useful functions. The icons are described below, starting with the icon on the far left of the screen.

http://www.samsung.com

• : Moves to the previous page.

•

: Moves to the next web page. : Displays the Bookmarks and History

• screen. You can bookmark the current page, select an existing bookmark, and edit and delete bookmarks. You can also view your browsing history and select a page to revisit.

• : Moves to the Home screen of the Web Browser.

http://www.samsung.com

•

: Lets you enter a page address manually using the keyboard pop-up.

: Reloads the current page so that it is

• refreshed on the screen.

•

: Adds the current page to your

bookmarks.

•

: Lets you search for information by entering words or characters using the keyboard pop-up. See Using the Keyboard Popup on this page.

100%

•

: Lets you enlarge or shrink the

screen by various percentages.

: Turns on the PIP function.

•

: Lets you switch between Pointer

Browsing and Link Browsing.

: Lets you configure the Browser’s

• settings. See Using the Setting Menu on page 48.

•

: Closes the Web Browser.

100%

When you click the

http://www.samsung.com

, the

or access a data or text entry field, and

then press the E button, the keyboard pop-up appears.

http://www.samsung.com

As you enter characters, recommended text will be shown.

Caps 1 2 3 4 5 6 7 8 9 0  Clear

q w e r t y u i o p ^ *

123#& a s d f g h j k l ~ @ ! Done

z x c v b n m , . ? -  Cancel

ENG

www.

.com /

 4

100%





To use the keyboard pop-up with your remote, follow these steps:

1. Use the ▲▼◄► buttons on your remote to move

the highlight to a letter or number of your choice.

2. Press the E button to enter the letter or number

into the entry field.

3. To access capital letters, move the highlight to the Caps key on the top left, and then press the E

button. Press the E button again with the Caps key highlighted to access small letters again.

4. To access symbols and additional punctuation marks, highlight the 123#& button on the left, and then press the E button.

5. To delete a character you entered, move the highlight to the  button, and then press the E button.

6. To delete all the characters you entered, move the highlight to the Clear button, and then press the

button.

7. When finished entering, move the highlight to the Done button, and then press the E button.

| NOTES |

If you have a wireless keyboard connected to your



product, you can use the wireless keyboard to enter letters, numbers, symbols, and punctuation. Note that the wireless keyboard will work only when the keyboard popup appears and can only be used to enter letters, numbers, symbols, and punctuation.

Network Services

English 47

Page 48

Network Services

Options on the Keyboard Pop-Up

To access the keyboard pop-up options, highlight the button on the bottom left of the keyboard, and then press the E button.

Select the language for the

Language

keyboard. You can select English, French, Russian, etc.

The keyboard will suggest

Recommended

Text

recommended words as you enter text. You can turn this function On or Off.

The keyboard will predict the next letter as you enter letters. The

Predict Next

Letter

predictions appear in a ring around the letter you have just entered. You can select a predicted letter or move to another letter. You can turn this function On or Off.

Using the Setting Menu

The Setting menu contains functions that control how the Browser operates and Browser security functions. To open the Setting menu, highlight the Control Panel, and then press the E button. To select an option in the setting menu, highlight the option, and then press the E button.

http://www.samsung.com

Turns the Grabber function On and Off. When the Grabber function is

Enable/ Disable

Grabbing

on, you can move a web page up and down without dragging the scroll bar.

The Grabber function is only available in Pointer Browsing.

icon in the

100%

Enable Grabbing

Approved Sites

Private browsing on

Web Browser Settings

Help

Lets you restrict your children’s access to inappropriate web pages by allowing access only to the web sites you have registered.

Every time you access Approved Sites, the PIN screen appears. The first time you access Approved Sites, enter the default PIN, 0000 using the number buttons on your remote.

You can change the PIN using the Reset password for the Approved Sites function. See below.

Approved Sites feature : Turns

Approved

Sites

the Approved Sites function on or off.

Reset password for Approved

Sites : Change the Approved Sites password.

Add current site : Lets you add

the currently displayed web site to the Approved Sites list.

Manage Approved Sites : Lets

you key in URLs to add to the Approved Sites List and delete sites from the Approved Sites list. If you turn Approved Sites on and have not added any sites to the Approved Sites list, you will not be able to access any Internet sites.

Enable or disable the Privacy mode. When the Privacy mode is enabled,

the browser does not retain the URLs of sites you visit. If you want

Private

browsing

on/off

to enable Privacy mode, select OK. If the Privacy mode is running, the

“Stop” icon appears in front of the URL at the top of the screen. To disable Privacy mode, select it again when Privacy mode is enabled.

48 English

Page 49

Set as homepage : You can set

the Browser's home page.

Pop-up Block : Turns the Popup

Block on and off.

Ad Block : You can determine

whether to block advertisements and select the URLs for which advertisements are blocked.

General : You can delete

personal in information such as website history and browsing data (cookies, etc.), and reset

Web Browser

Settings

Help

| NOTES |

Depending on the web site, some of the Web Browser



Setting functions may not be activated. Functions that are not activated are greyed out and cannot be used.

all web browser settings to their factory defaults.

Encoding : You can set the

Encoding setting for web pages to Automatic or select the encoding format manually from a list.

Pointer : You can set the speed

of the cursor when the cursor is set to Pointer and turn Smart Cursor On and Off.

Browser Information : Displays

the version number and copyright information for the Web Browser.

Provides basic information about the operation of the Web Browser.

Linking your Internet Service Accounts to the Product

The Link Service Accounts function lets you link your product to your accounts with Internet services that the product can log you in to the service automatically when you start the app for that service.

To create a service account link, follow these steps:

1. On the Home screen, press the RED (A) button on your remote to log in to your Samsung Account.

2. After you have logged in, press the RED (A) button on your remote again.

3. Select Link Service Accounts in the My Account pop-up, and then press the E button.

4. On the Link Service Accounts screen, select the service you want to link to the product, and then press the E button.

5. Select Register, and then press the E button.

6. In the ID and Password screen, enter the ID you use

to log in to the service you selected using the popup keyboard. When finished, select Done, and then press the E button.

7. Repeat the same process for the password. When finished select Done, and then press the E button.

8. Select OK, and then press the E button.

BD-LIVE™

Once the product is connected to your network, you can enjoy various movie-related service contents available on BD-LIVE compliant discs.

1. Attach a USB flash drive to the USB jack on the front of the product, and then check its remaining memory. The memory device must have at least 1GB of free space to accommodate the BD-LIVE services.

2. Select Settings on the Home screen, and then press the E button.

3. Select Network, and then press the E button.

4. Select BD-Live Settings, and then press the E

button.

5. Select BD Data Management, and then press the

button.

6. Select Select Device, and then press the E button.

7. Select USB device, and then press the E button.

8. Insert a Blu-ray Disc that supports BD-LIVE.

9. Select an item from the list of BD-LIVE service

contents provided by the disc manufacturer.

| NOTES |

The way you use BD-LIVE and the provided contents



may differ, depending on the disc manufacturer.

Network Services

English 49

Page 50

Appendix

Additional Information

Notes

Connections

HDMI OUT

• Certain HDMI output resolutions may not work, depending on your TV.

• You must have a HDMI connection to enjoy videos with 3D technology.

• A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.

Settings

3D Settings

• For some 3D discs, to stop a movie during 3D playback, press the 5 button once. The movie stops and the 3D mode option is de-activated. To change a 3D option selection when you are playing a 3D movie, press the 5 button once. The Blu-ray menu appears. Press the 5 button again, then select 3D Settings in the Blu-ray menu.

• Depending on the content and the position of the picture on your TV screen, you may see vertical black bars on the left side, right side, or both sides.

TV Aspect Ratio

• Depending on the disc type, some aspect ratios may not be available.

• If you select an aspect ratio and option which is different than the aspect ratio of your TV screen, then the picture might appear to be distorted.

• If you select 16:9 Original, your TV may display 4:3

Pillarbox (black bars on sides of picture).

BD Wise (Samsung Products only)

• When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD Wise appears in the Resolution menu.

• If the product is connected to a device that does not support BD Wise, you can not use the BD Wise function.

For proper operation of BD Wise, set the BD Wise

• option in both the product and the TV to On.

Digital Output

• Be sure to select the correct Digital Output or you will hear no sound or just loud noise.

• If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital, DTS), the audio signal outputs as PCM.

• Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.

• Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.

• This Digital Output setup does not affect the analogue (L/R) audio or HDMI audio output to your TV. It affects the optical and HDMI audio output when your product is connected to an AV receiver.

• If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital Output selections (PCM or Bitstream).

• Digital Output can be activated when Speaker

Selection is set to TV Speaker.

BD-Live Internet Connection

• The Internet connection may be restricted while you are using BD-LIVE contents.

Anynet+ (HDMI-CEC)

• Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

• This function is not available if the HDMI cable does not support CEC.

• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.

BD Data Management

• In the external memory mode, disc playback may be stopped if you disconnect the USB device in the middle of playback.

• Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported. We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or faster read/write speed.

• The Resume Play function may not work after you format the storage device.

• The total memory available to BD Data Management may differ, depending on the conditions.

50 English

Page 51

DivX® Video On Demand

Selecting the Subtitle Language

• For more information about DivX(R) VOD, visit “http:// vod.divx.com”.

Front Display

• You cannot change the brightness of the and the VOL +, - button.

Speaker Settings

• When Speaker Selection is set to TV Speaker, audio is produced through the TV speakers.

HDMI audio

• When HDMI audio is output to the TV speakers, it is automatically down-mixed to 2 channels.

Audio Return Channel

• When Anynet+ (HDMI-CEC) is Off, the Audio Return Channel function is not available.

• Using an HDMI Cable not certified for ARC (Audio Return Channel) may cause a compatibility problem.

• The ARC function is only available if an ARCcompliant TV is connected.

Playback

Playing Video files

• Video files with high bit rates of 20Mbps or more strain the product’s capabilities and may stop playing during playback.

button

• Depending on the Blu-ray Disc / DVD, you may be able to change the subtitle language in the Disc Menu. Press the DISC MENU button.

• This function depends on the selection of subtitles that are encoded on the disc and may not be available on all Blu-ray Discs/DVDs.

• Information about the main feature BONUSVIEW mode will also appear if the Blu-ray Disc has a BONUSVIEW section.

• This function changes both the primary and secondary subtitles at the same time.

• The total number of primary and secondary subtitles are displayed respectively.

Playing JPEG files

• You can’t enlarge the subtitle and PG graphic in the full screen mode.

Media Play

Using the TOOLS button while playing pictures

• If the system is connected to a BD Wise compliant TV that has set BD Wise to On, the Picture Settings menu will not appear.

• The Background Music function will not work unless the music file and the photo file are located on the same storage media. Also, sound quality can be impacted by the bit rate of the MP3 music file, the size of the photos, and the encoding method.

Appendix

Selecting the Audio Language

• The ◄► indicator will not appear on the screen if the BONUSVIEW section does not contain any BONUSVIEW audio settings.

• The languages available through the Audio Language function depend on the languages that are encoded on the disc. This function or certain languages may not be available.

• Some Blu-ray Discs may allow you to select either the PCM or Dolby Digital audio soundtrack in English.

English 51

Page 52

Appendix

Digital Output Selection

Setup PCM

Connection HDMI supported AV receiver

PCM Up to PCM 7.1ch PCM DTS re-encoded

Dolby Digital Up to PCM 2.1ch Dolby Digital DTS re-encoded

Audio

Stream on

Blu-ray Disc

Dolby Digital

Plus

Dolby

TrueHD

DTS Up to PCM 7.1ch DTS DTS re-encoded

DTS-

HD High

Resolution

Audio

DTS-HD

Master

Audio

Up to PCM 2.1ch Dolby Digital Plus DTS re-encoded

Up to PCM 2.1ch Dolby TrueHD DTS re-encoded

Up to PCM 7.1ch

Bitstream

(Unprocessed)

DTS-HD High

Resolution Audio

DTS-HD Master

Audio

Bitstream

(Re-encoded DTS)

DTS re-encoded

Bitstream

(Re-encoded

Dolby D)

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Audio

Stream on

DVD

Definition for

Blu-ray Disc

If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be PCM 2ch.

Blu-ray Discs may include three audio streams :

- Main Feature Audio : The audio soundtrack of the main feature.

- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.

- Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects may sound. Navigation Sound Effects are different on each Blu-ray Disc.

PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch

Dolby Digital Up to PCM 2.1ch Dolby Digital Dolby Digital Dolby Digital

DTS Up to PCM 7.1ch DTS DTS DTS

Decodes the main

feature audio and

BONUSVIEW audio

stream together

into PCM audio and

adds Navigation

Sound Effects, then

re-encodes the PCM

audio into Dolby

Digital bitstream or

PCM.

Any

Decodes the main

feature audio and

BONUSVIEW audio

stream together

into PCM audio and

adds Navigation

Sound Effects.

Outputs only the

main feature audio

stream so that your

AV receiver can

decode the audio

bitstream.

You will not hear

BONUSVIEW audio

or Navigation Sound

Effects.

Decodes the main

feature audio and

BONUSVIEW audio

stream together

into PCM audio and

adds Navigation

Sound Effects, then

re-encodes the

PCM audio into DTS

bitstream.

52 English

Page 53

Resolution according to the output mode

Blu-ray Disc/E-contents/Digital Contents playback DVD playback

Output

Setup

BD Wise

Auto Max. Resolution of TV input Max. Resolution of TV input

1080p@60F 1080p@60F 1080p@60F

Movie Frame : Auto (24Fs) 1080p@24F -

1080i 1080i 1080i 720p 720p 720p

576p/480p 576p/480p 576p/480p

Blu-ray Disc

Resolution of Blu-ray

Disc

HDMI Mode

Digital contents

E-contents/

1080p@60F 480i

HDMI Mode

Troubleshooting

Refer to the table below when this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord and contact the nearest authorized dealer or Samsung Electronics Service Centre.

Appendix

Symptom Check/Remedy

I cannot eject the disc.

Playback does not start.

Playback does not start immediately when the Play/Pause button is pressed.

Sound is not produced.

The remote control does not work.

• Is the power cord plugged securely into the outlet?

• Turn off the power and then turn it back on.

• Check the region number of the Blu-ray/DVD disc. Blu-ray/DVD disc purchased from abroad may not be playable.

• CD-ROMs and DVD-ROMs cannot be played on this product.

• Make sure that the rating level is correct.

• Are you using a deformed disc or a disc with scratches on the surface?

• Wipe the disc clean.

• The home cinema does not play sound during fast playback, slow playback,and step motion playback.

• Are the speakers connected properly? Is the speaker setup correctly customized?

• Is the disc severely damaged?

• Are you operating the remote within its operational range and within the proper angle relative to the sensor?

• Are the batteries drained?

• Have you selected the mode (TV/BD) functions of the remote control (TV or BD) correctly?

English 53

Page 54

Appendix

Symptom Check/Remedy

• The disc is rotating but

no picture is produced.

• Picture quality is poor

and the picture is shaking.

Audio language and subtitles do not work.

The menu screen does not appear even when the menu function is selected.

The aspect ratio cannot be changed.

• The product is not

working. (Example: The power goes out or a strange noise is heard.)

The Product is not working

•

normally.

You have forgotten the rating level password.

• Is the TV power on?

• Are the video cables connected properly?

• Is the disc dirty or damaged?

• A poorly manufactured disc may not be playable.

• Audio language and subtitles will not work if the disc does not contain them.

• Are you using a disc that does not contain menus?

• You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or 4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function.

• Press and hold the remote control's 5 button for 5 seconds in STANDBY mode.

- Using the RESET function will erase all stored settings. Do not use this unless necessary.

• With no disc in the product, press and hold the product's 5 button for longer than 5 seconds. INIT appears on the display and all settings will return to the default values. Then, press the POWER button.

- Using the RESET function will erase all stored settings. Do not use this unless necessary.

Can't receive radio broadcasts.

While listening to TV audio through the Product, no sound is heard.

"Not Available" appears on screen.

If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV.

No HDMI output.

• Is the antenna connected properly?

• If the antenna's input signal is weak, install an external FM antenna in an area with good reception.

• If the OPEN/CLOSE ^ button is pressed while listening to TV audio using the D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV audio is muted.

• The features or action cannot be completed at this time because:

1. The Blu-ray/DVD disc's software restricts it.

2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)

3. The feature is not available at the moment.

4. You’ve requested a title or chapter number or search time that is out of range.

• Press and hold the 5 button on front panel for more than 5 seconds with no disc in the product. All settings will revert to the factory settings.

• Check the connection between the TV and the HDMI jack of the product.

• Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution.

54 English

Page 55

Symptom Check/Remedy

Abnormal HDMI output screen.

AllShare function

I can see folders shared through AllShare, but I cannot see the files.

Video is played intermittently.

The AllShare connection between the product and PC is unstable.

BD-LIVE

I cannot connect to the BD-LIVE server.

• If random noise appears on the screen, it means that TV does not support HDCP (High-bandwidth Digital Content Protection).

• AllShare only shows Video, Photo, and Music files. Other types of files are not displayed.

• Check if the network is stable.

• Check if the network cable is properly connected and if the network is not overloaded.

• The wireless connection between the DLNA compatible device and the product is unstable. Check the connection.

IP address under the same subnetwork should be unique, otherwise IP collision can

• results in such a phenomenon.

•

Check if you have a firewall enabled. If so, disable the firewall function.

• Test whether the network connection is active by using the Network Status function.

• Check whether a USB memory device is connected to the product.

• The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. (See page 50)

• See if the BD-LIVE Internet Connection option is set to Allow(All).

• If all above fails, contact the contents provider or update to the latest firmware.

Appendix

When using the BD-LIVE service, an error occurs.

| NOTES |

When the factory default settings are restored, all stored user BD data will be deleted.



Hereby, Samsung Electronics, declares that this Home Cinema System is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.

This equipment may be operated in all EU countries. This equipment may only be used indoors.

The memory device must have at least 1GB of free space to accommodate the

• BD-LIVE service. You can check the available size in BD Data Management. (See page 50)

English 55

Page 56

Appendix

Specifications

Weight 2.70 kg

Dimensions 430.00 (W) x 55.00 (H) x 312.00 (D) mm

General

Operating Temperature Range +5°C to +35°C

Operating Humidity Range 10 % to 75 %

Signal/noise ratio 55 dB

FM Tuner

HDMI

Amplifier

Speaker

system

Usable sensitivity 12 dB

Total harmonic distortion 0.5 %

Video 1080p, 1080i, 720p, 576p/480p

Audio

Front speaker output 165W x 2(3)

Subwoofer speaker output 170W(3)

Frequency response

S/N Ratio 70dB

Channel separation 60dB

Input sensitivity (AUX)500mV

Impedance Frequency range

PCM multichannel audio, Bitstream audio, PCM audio

Analogue input : 20Hz~20kHz (±3dB)

Digital input : 20Hz~40kHz (±4dB)

Speaker (2.1ch speaker system)

Output sound

pressure level

Rated

input

Maximum

input

Dimensions

(W x H x D) (Unit : mm)

Weights

(Unit : kg)

Front

3 

Subwoofer 40Hz ~ 160Hz 88dB/W/M 170W 340W 170.0 x 350.4 x 287.0 3.41

• Network speeds equal to or below 10Mbps are not supported.

• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.

• Weight and dimensions are approximate.

• Design and specifications are subject to change without prior notice.

• For the power supply and Power Consumption, refer to the label attached to the product.

56 English

140Hz~ 20kHz 87dB/W/M 165W 330W

104.1 x 671.0 x 100.5 (Stand base: Ф 223.0)

1.99

Page 57

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Area Contact Centre

Europe

AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com

BELGIUM 02-201-24-18

BOSNIA 051 331 999 www.samsung.com BULGARIA 07001 33 11 , share cost tariff www.samsung.com/bg CROATIA 062 SAMSUNG (062 726 786) www.samsung.com/hr

800 - SAMSUNG (800-726786) www.samsung.com

CZECH

DENMARK 70 70 19 70 www.samsung.com FINLAND 030-6227 515 www.samsung.com FRANCE 01 48 63 00 00 www.samsung.com/fr

GERMANY

CYPRUS 8009 4000 only from landline www.samsung.com/gr

GREECE

HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com/hu ITALIA 800-SAMSUNG (726-7864) www.samsung.com

Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 Praha 4

0180 6 SAMSUNG bzw. 0180 6 7267864* (*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk max. 0,60 €/Anruf)

80111-SAMSUNG (80111 726 7864) only from land line (+30) 210 6897691 from mobile and land line



Web Site

www.samsung.com/be (Dutch) www.samsung.com/be_fr (French)

www.samsung.com

www.samsung.com/gr

Area Contact Centre

LUXEMBURG 261 03 710 www.samsung.com MONTENEGRO 020 405 888 www.samsung.com

NETHERLANDS

NORWAY 815 56480 www.samsung.com

POLAND

PORTUGAL 808 20-SAMSUNG (808 20 7267) www.samsung.com

ROMANIA

SERBIA 011 321 6899 www.samsung.com/rs SLOVAKIA 0800 - SAMSUNG (0800-726 786) www.samsung.com SPAIN 902172678 www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com

SWITZERLAND

U.K 0330 SAMSUNG (7267864) www.samsung.com EIRE 0818 717100 www.samsung.com LITHUANIA 8-800-77777 www.samsung.com/lt LATVIA 8000-7267 www.samsung.com/lv ESTONIA 800-7267 www.samsung.com/ee

0900-SAMSUNG (0900-7267864) (€ 0,10/ Min)

0 801-172-678* lub +48 22 607-93-33 ** *(całkowity koszt połączenia jak za 1 impuls według taryfy operatora) ** (koszt połączenia według taryfy operatora)

08008 SAMSUNG (08008 726 7864) TOLL FREE No.

0848 - SAMSUNG (7267864, CHF 0.08/ min)



Web Site

www.samsung.com

www.samsung.com/pl

www.samsung.com/ro

www.samsung.com/ch (German) www.samsung.com/ch_fr (French)

Correct disposal of batteries in this product

(Applicable in countries with separate collection systems)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

AH68-02623A-02

Samsung HT-FS6200/XU User guide

Specifications and Main Features

Frequently Asked Questions

User Manual