Samsung HT-F6530 User Manual

5.1CH Blu-ray™
Home Entertainment System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register
Safety Information
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lighting flash and arrowhead within the triangle are warning signs alerting you to dangerous voltage inside the product.
WARNING
• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
Note to CATV system installer
This reminder is provided to call the CATV system installer’s attention to Section 820~40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
CLASS 1 LASER product
This product is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
 Figures and illustrations in this User Manual are provided for reference only and may differ from actual
product appearance.
An administration fee may be charged if either
a. an engineer is called out at your request and there is no defect in the product (i.e. where you have
failed to read this user manual)
b. you bring the unit to a repair center and there is no defect in the product (i.e. where you have failed to
read this user manual).
 The amount of such administration charge will be advised to you before any work or home visit is carried
out.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DANGER :
• VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)
CAUTION :
• CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM (IEC 60825-1)
• THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1
The exclamation point within the triangle is a warning sign alerting you to important instructions accompanying the product.
|

2 English

Precautions
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus (including AV receivers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience receptacles, and the point where it exits the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand,
tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as when the power­supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Disc Storage & Management
• Holding Discs
- Fingerprints or scratches on a disc may reduce sound and picture quality or cause skipping.
- Avoid touching the surface of a disc where data has been recorded.
- Hold the disc by the edges so that fingerprints will not get on the surface.
- Do not stick paper or tape on the disc.
• Cleaning Discs
- If you get fingerprints or dirt on a disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.
- When cleaning, wipe gently from the inside to the outside of the disc.
- Disc Storage
Do not keep in direct sunlight. Keep in a cool ventilated area. Keep in a clean protection jacket and store
vertically.
Handling Cautions
• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus.
• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.
• Do not touch the power plug with a wet hand. It can cause an electric shock.
• Do not plug multiple electric devices into the same wall socket. Overloading a socket can cause it to overheat, resulting in a fire.
• Before connecting other components to this product, be sure to turn them off.
• If you move your product suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the product, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.
01 Safety Information
English 3
|
Safety Information
• If the product makes an abnormal noise or produces a burning smell or smoke, turn off the power switch immediately and disconnect the power plug from the wall outlet. Then, contact the nearest customer service center for technical assistance. Do not use the product. Using the product as it is may cause a fire or an electric shock.
License
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, DTS-HD, the Symbol, and DTS or DTS-HD and the Symbol together are registered trademarks & DTS Neo:Fusion is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association.
This product uses Cinavia technology to limit the use of unauthorized copies of some commercially­produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.” This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.
- Open Source License Notice In the case of using open source software, Open
Source Licenses are available on the product menu.
Using the 3D Function
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the 3D function.
• Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea, and headaches. If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest.
• Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses, and rest.
• A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.
• Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.)
• Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury.
|
4 English
• If you want to enjoy 3D content, connect a 3D device (3D compliant AV receiver or TV) to the product’s HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content.
• The product outputs 3D signals only through HDMI cable connected to the HDMI OUT port.
• As the video resolution in 3D play mode is fixed according to the resolution of the original 3D video, you can not change the resolution to your preference.
• Some functions such as BD Wise, screen size adjustment, and resolution adjustment may not operate properly in 3D play mode.
• You must use a high-speed HDMI cable for proper output of the 3D signal.
• Stay at least three times the width of the screen from the TV when watching 3D images. For example, if you have a 46 inch screen, stay 138 inches (11.5 feet) from the screen.
• Place the 3D video screen at eye level for the best 3D picture.
• When the product is connected to some 3D devices, the 3D effect may not function properly.
• This product does not convert 2D content into 3D.
• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of the Blu-ray Disc Association.
Copyright
© 2013 Samsung Electronics Co.,Ltd. All rights reserved; No part or whole of this user’s manual
may be reproduced or copied without the prior written permission of Samsung Electronics Co.,Ltd.
Contents
SAFETY INFORMATION
2 Warning 3 Precautions 3 Disc Storage & Management 3 Handling Cautions 4 License 4 Using the 3D Function 5 Copyright
GETTING STARTED
6 Disk and Format Compatibility 7 Logos of Discs the Product can Play 10 Accessories 11 Front Panel 11 Rear Panel 12 Remote Control
CONNECTIONS
14 Connecting the Speakers 17 Connecting to TV/External Devices 18 Connecting to a Network Router
SETTINGS
19 The Initial Settings Procedure 19 The Home Screen 19 Accessing the Settings Screen 20 Settings Menu Functions 24 Networks and the Internet 27 Upgrading Software
MEDIA PLAY
29 The All Content Screen 29 Playing Commercial Discs 29 Playing Files on a USB Device 30 Playing a Disc with User Recorded Content 30 Using the AllShare Network Function 31 Controlling Video Playback 34 Controlling Music Playback 38 Playing Photo Contents 39 Listening to Radio 40 Using the Special Effects Remote Control Buttons
NETWORK SERVICES
42 Logging in to Your Samsung Account 42 Before Using Movies & TV Shows or Apps 43 Using Movies & TV Shows 43 Using Apps 47 Screen Mirroring 47 Using the Web Browser 50 Linking your Internet Service Accounts to the
Product
50 BD-LIVE™
APPENDIX
51 Additional Information 54 Troubleshooting 57 Specifications
01 Safety Information
English 5
|
Getting Started
Disk and Format Compatibility
Disc Types and content your Product can Play
Media Disc Type Details
Blu-ray Disc
3D Blu-ray Disc
VIDEO
MUSIC
PHOTO
| NOTES |
The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
Your product will not play content that has been recorded on a DVD-R at a bitrate that exceeds 10 Mbps.
Your product will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 30
Mbps. Playback may not work for some types of discs, or when you use specific operations, such as angle change
and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary. When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
DVD-VIDEO, DVD-RW,
DVD-R, DVD+RW,
DVD+R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
BD-ROM or BD-RE/-R disc recorded in the BD-RE format.
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been recorded and finalized, or a USB storage media containing MKV, MP4 contents.
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage media containing MP3 or WMA contents.
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage media containing JPEG contents.
Disc Types your Product cannot Play
• HD DVD
• DVD-ROM/PD/MV-Disc, etc
| NOTES |
This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow
specific or limited operation and provide only certain features during playback. Please note that this is not a defect in the product. Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because
disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the manufacture of discs. Please contact the SAMSUNG Customer Care Center at 1-800-726-7864 if you have questions or encounter
difficulty when playing Blu-ray Disc, DVD, or CD discs in this product. Also, refer to rest of this user manual for additional information on playback restrictions. Some commercial discs and DVD discs purchased outside your region may not play on this product.
|
6 English
• DVD-RAM
• Super Audio CD (except CD layer)
• DVD-RW(VR mode)
• CVD/CD-ROM/CDV/ CD-G/CD-I/LD (CD-Gs play audio only, not graphics.)
• 3.9 GB DVD-R Disc for Authoring.
Region Code
Both products and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Number for this product is displayed on the rear panel of the product.
Disc Type
Blu-ray Disc
DVD-VIDEO
Region
Code
North America, Central
A
B
C
1
2
3
4
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
India, China, Russia, Central
and South Asia.
The U.S., U.S. territories and
Europe, Japan, the Middle
East, Egypt, South Africa,
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Area
Canada
Greenland
Caribbean
Logos of Discs the Product can Play
Blu-ray Disc 3D Blu-ray Disc
BD-LIVE Dolby
DTS
Java
NTSC broadcast system
in U.S.A, Canada, Korea,
Japan
02 Getting Started
Russia, Eastern Europe, India,
most of Africa, North Korea,
5
6
| NOTES |
If the Region number of a Blu-ray Disc/DVDs
does not correspond to the Region number of this product, the product cannot play the disc.
Mongolia
China
English 7
|
Getting Started
Supported Formats
Video File Support
File
Extension
*.avi
*.mkv
*.asf *.wmv *.mp4
*.3gp
*.vro *.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.m2ts
*.webm
Container Video Codec Resolution
MPEG4 SP/ASP
AVI
MKV
ASF MP4 3GP
MOV
FLV VRO VOB
PS TS
SVAF
WebM VP8 1920x1080
H.264 BP/
MP/HP
Motion JPEG
Microsoft
MPEG-4 v3
Window Media
Video v7, v8, v9
MPEG2
MPEG1
VP6 640x480
MVC -
1920x1080
(WMV v7,v8,
MSMPEG4 v3 :
1280x720)
Limitations
- Even when a file is encoded by a supported codec listed above, the file might not be played if its content is defective or corrupted.
- Normal playback is not guaranteed if the file's container information is wrong or the file itself is corrupted.
- Files having higher bit or frame rates than standard may stutter when played back.
- The seek (skip) function is not available if the file's index table is damaged.
- When you playback a file remotely through a network connection, video playback may stutter depending on the network speed.
- Some USB/Digital camera devices may not be compatible with the product.
Video decoder
- Supports up to H.264 Level 4.1 (except for FMO/ASO/ RS)
- Does not support VC1 AP L4
- Except for WMV v7, v8, MSMPEG4 v3, MVC, VP6 Below 1280 X 720: 60 frame max Above 1280 X 720: 30 frame max
- Does not support GMC 2 or higher
Frame rate
(fps)
6~30
24/25/30 60
6~30 20 Vorbis
- Supports SVAF Top/Bottom, Side by Side Only
- Supports BD MVC Spec Only
Bitrate (Mbps)
30
4
Audio Codec
Dolby Digital
LPCM
ADPCM
(IMA, MS)
AAC
HE-AAC
WMA
Dolby Digital
Plus
MPEG(MP3)
DTS
Audio decoder
- Supports WMA 10 Pro (Up to 5.1)
- Does not support WMA lossless audio.
- Supported ADPCM IMA, MS.
- Does not support ADPCM (A-Law, μ-Low)
- Does not support QCELP, AMR NB/WB
- Supports vorbis (Up to 2ch),
- Supports Dolby Digital Plus (Up to 7.1ch)
Comments
- MPEG4 : Supports up to GMC 1-Warping Point.
- H.264 : Supports up to BP/MP/HP Level 4.1.
- WMV : Supports V9, VC1 SP/MP/AP L3.
- MPEG1 : Does not support D-picture.
- MPEG2 : Supports up to Hight Profile High Level.
| NOTES |
Some MKV and MP4 format discs may not play,
depending on their video resolution and frame rate.
|
8 English
Music File Support
File
Extension
*.mp3
*.m4a *.mpa
*.aac
*.flac
*.ogg
*.wma
*.wav
*.mid
*.midi
*.ape
Container
MP3
MPEG4
FLAC
OGG
WMA
wav
midi
ape
Picture File Support
Audio
Codec
MPEG1
Audio
Layer 3
FLAC
Vorbis
WMA
Support Range
-
AAC -
Supports up to
2ch
Supports up to
2ch
Supports WMA 10
Pro (Up to 5.1)
Does not support
WMA lossless
audio
Supports up to M2
profile
Does not
support LBR mode
wav -
midi type 0 and type 1
Does not support
ape
X13, NVT
Notes on the USB connection
• Your product supports USB storage media, MP3 players, digital cameras, and USB card readers.
• The product does not support folder or file names longer than 128 characters.
• Some USB/digital camera devices may not be compatible with the product.
• Your product supports the FAT 16, FAT 32, and NTFS file systems.
• Connect USB devices directly to the product’s USB port. Connecting through a USB cable may cause compatibility problems.
• Inserting more than one memory device into a multi-card reader may cause the reader to operate improperly.
• The product does not support the PTP protocol.
• Do not disconnect a USB device during a “loading” process.
• The bigger the image resolution, the longer the image takes to display.
• This product cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial sites.
• Your product only supports video that is under 30fps (frame rate).
• Your product only supports USB Mass Storage Class (MSC) devices such as thumb drives and USB HDD. (HUB is not supported.)
• Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible with this product.
• If some USB devices require excessive power, they may be limited by the circuit safety device.
• If playback from a USB HDD is unstable, provide additional power by plugging the HDD into a wall socket. If the problem continues, contact the USB HDD manufacturer.
• SAMSUNG is not responsible for any data file damage or data loss.
02 Getting Started
File Extension Type
*.jpg
*.jpeg
*.png
*.bmp
*.mpo
JPEG
PNG
BMP
MPO
Resolution
15360x8640
4096x4096
4096x4096
15360x8640
English 9
|
Getting Started
AVCHD (Advanced Video Codec High Definition)
• This product can play back AVCHD format discs. These discs are normally recorded and used in camcorders.
• The AVCHD format is a high definition digital video camera format.
• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing format.
• Some AVCHD discs use the “x.v.Color” format. This product can play back AVCHD discs that use the “x.v.Color” format.
• “x.v.Color” is a trademark of Sony Corporation.
• “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony Corporation.
| NOTES |
Some AVCHD format discs may not play, depending
on the recording conditions. AVCHD format discs need to be finalized.
“x.v.Color” offers a wider color range than normal DVD
camcorder discs. Some MKV and MP4 format discs may not play,
depending on their video resolution and frame rate.
Accessories
Check for the supplied accessories below.
FM Antenna
Power Cable
User Manual Soft Cloth
|
10 English
FUNCTION
TV
SOURCE
RECEIVER
SLEEP
BD TV
123 4
56 809
7
DISC MENU TITLE MENU
POPUP
MUTE
TUNING
TV SOUND
VOL
/ CH
FULL SCREEN REPEAT
HOME
INFO
TOOLS
RETURN
EXIT
TUNER
MO/ST
MEMORY
ABCD
3D SOUND
S/W LEVEL
SMART SEARCH
HUB
SOUND
MANUAL
SUBTITLE
AUDIO
EFFECTPRESET
Remote Control/
Batteries (AAA size)
Front Panel
H
I
G
H
-
E
N
D
V
A
C
U
U
M
T
U
B
E
S
O
U
N
D
5V 0.5A
HDMI OUT
HDMI IN
1 2
LAN
POWER
AUX IN FM ANT
OPTICAL
DIGITAL
AUDIO IN
L
R
SPEAKERS OUT
CENTER
SUBWOOFER
FRONT
L
SURROUND
L
FRONT
R
SURROUND
R
IMPEDANCE : 3
VACUUM TUBE AMP
VOLUME CONTROL
OPEN/CLOSE
PLAY/PAUSE
STOP
FUNCTION
DISPLAYDISC TRAY
02 Getting Started
REMOTE CONTROL SENSOR
POWER USB
| NOTES |
Cellular phones or mobile devices placed near the vacuum tube amp or electronic products placed on the top of the
product can cause audio noise or distortion. When the product is on, do not let children touch the product's surface. It will be hot.
To upgrade the product's software through the USB jack, you must use a USB flash drive.
When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the 6 button on the
product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the
button.
E
If you use the Internet service or play the USB device contents on the TV, you cannot select the BD/DVD mode with
the FUNCTION button. Stop the playing contents on the TV first to select the BD/DVD mode.
Rear Panel
SPEAKER OUTPUT
COOLING FAN
CONNECTORS
POWER CORD HDMI OUT LAN TERMINAL EXTERNAL DIGITAL
* Connecting the FM Antenna
1. Connect the FM antenna supplied to the FM ANT Jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or
other rigid surface.
|
NOTES
|
Maintain a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate ventilation. Do
not obstruct the cooling fan or ventilation holes. This product does not receive AM broadcasts.
HDMI IN AUX IN * FM ANTENNA
AUDIO IN (OPTICAL)
English 11
|
Getting Started
Remote Control
Tour of the Remote Control
Turn the product on and off.
To change to Television mode
and control the TV, press the TV
button.
To change to Home Theater mode
and control the Home Theater,
press the BD button.
Press numeric buttons to operate
options.
Press to view the disc menu.
Press to skip backwards or
forwards.
Press to stop/play a disc.
Cut off the sound temporarily.
Adjust the volume.
Press to move to the Home screen.
Press to see the full screen
on a TV.
Press to use the Tools menu.
Select on-screen menu items and
change menu values.
Return to the previous menu.
These buttons are used both for
menus on the product and also
several Blu-ray Disc functions.
Press to use Smart Hub.
Press to select MANUAL/PRESET
in the Tuner function.
Press to search contents.
Selects the disc Audio language.
FUNCTION
TV
SOURCE
RECEIVER
BD TV
1 4 7
DISC MENU TITLE MENU
VOL
FULL SCREEN REPEAT
TOOLS
RETURN
ABCD
SMART SEARCH
HUB
MANUAL
AUDIO
SLEEP
2
3 56 809
POPUP
MUTE
TUNING
TV SOUND
/ CH
HOME
INFO
EXIT
TUNER
MO/ST
MEMORY
3D SOUND
S/W LEVEL
SOUND
SUBTITLE
EFFECTPRESET
Press to select the home theater's mode (HDMI1, AUX, BD/DVD, etc.).
or Press to select TV's video mode.
Set a Sleep time to shut off the product.
Press to open and close the disc tray.
Use to enter the Popup menu/Title menu.
Press to search backwards or forwards.
Press to pause a disc.
Search for active FM stations and to change channels.
Press to output the audio signal to the home theater speakers or the TV speaker. (See page 40)
Allows you to repeat a title, chapter, track or disc.
Use to display the playback information when playing a Blu-ray/DVD disc.
Press to exit the menu.
Use to set a preset radio frequency.
Select MONO or STEREO for radio broadcasts.
Press to apply the 3D sound effect. Press to apply sound effects.
Use to adjust the level of the subwoofer.
Selects the disc subtitle language.
|
12 English
Installing Batteries in the Remote Control
Battery size: AAA
21
| NOTES |
Make sure to match the “+” and “–” ends of the
batteries with the diagram inside the compartment. Assuming typical TV usage, the batteries last for about
one year. The remote control can be used up to approximately
23 feet (7 meters) from the product in a straight line.
Setting up the Remote Control
You can control certain functions of your TV with this remote control.
To operate a TV with the Remote Control
1. Press the TV button to set the remote control to TV
mode.
2. Turn on your TV.
3. While holding down the POWER button, enter the
code corresponding to your brand of TV.
• If there is more than one code listed for your TV in the table, enter one at a time to determine which code works.
Example : For a Samsung TV While holding down the POWER button, use the number buttons to enter 00. If that does not work, try 15, then 16, etc.
4. If the TV turns off, the setting is complete.
• You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9).
| NOTES |
The remote may not be able to control some
functions, depending on your brand of TV. Also, the remote control may not work on some brands of TVs. The remote control will work with Samsung TVs by
default.
TV Control Codes
Brand Code
Admiral
(M.Wards)
A Mark 01, 15
Anam
AOC 01, 18, 40, 48
Bell & Howell
(M.Wards) Brocsonic 59, 60
Candle 18
Cetronic 03
Citizen 03, 18, 25
Cinema 97
Classic 03
Concerto 18
Contec 46
Coronado 15
Craig 03, 05, 61, 82, 83, 84
Croslex 62
Crown 03
Curtis Mates 59, 61, 63
CXC 03
Daewoo
Daytron 40 Dynasty 03
Emerson
Fisher 19, 65
Funai 03
Futuretech 03
General Electric
(GE)
Hall Mark 40
Hitachi 15, 18, 50, 59, 69
Inkel 45
JC Penny 56, 59, 67, 86
JVC 70 KTV 59, 61, 87, 88 KEC 03, 15, 40
KMC 15
LG (Goldstar)
Luxman 18
LXI (Sears)
Magnavox
Marantz 40, 54
Matsui 54
MGA 18, 40
56, 57, 58
01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14
57, 58, 81
02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 34,
35, 36, 48, 59, 90
03, 15, 40, 46, 59, 61, 64,
82, 83, 84, 85
06, 40, 56, 59, 66, 67, 68
01, 15, 16, 17, 37, 38, 39,
40, 41, 42, 43, 44
19, 54, 56, 59, 60, 62, 63,
65, 71
15, 17, 18, 48, 54, 59, 60,
62, 72, 89
Brand Code
Mitsubishi/MGA 18, 40, 59, 60, 75
MTC 18 NEC 18, 19, 20, 40, 59, 60 Nikei 03
Onking 03
Onwa 03
Panasonic
Radio Shack 17, 48, 56, 60, 61, 75
RCA/Proscan
Signature 2000
(M.Wards)
Soundesign 03, 40
Spectricon 01
Symphonic 61, 95, 96
Techwood 18
Dongyang 03, 54
06, 07, 08, 09, 54, 66,
Penney 18
Philco
Philips
Pioneer 63, 66, 80, 91
Portland 15, 18, 59
Proton 40
Quasar 06, 66, 67
Realistic 03, 19
Sampo 40
Samsung
Sanyo 19, 61, 65 Scott 03, 40, 60, 61 Sears 15, 18, 19 Sharp 15, 57, 64
Sony 50, 51, 52, 53, 55
SSS 18
Sylvania
Tatung 06
Teknika 03, 15, 18, 25
TMK 18, 40 Toshiba 19, 57, 63, 71 Vidtech 18
Videch 59, 60, 69
Wards
Yamaha 18
York 40
Yupiteru 03
Zenith 58, 79 Zonda 01
67, 73, 74
03, 15, 17, 18, 48, 54,
59, 62, 69, 90
15, 17, 18, 40, 48, 54,
62, 72
18, 59, 67, 76, 77, 78,
92, 93, 94
00, 15, 16, 17, 40, 43,
46, 47, 48, 49,
59, 60, 98
57, 58
18, 40, 48, 54, 59, 60,
62
15, 17, 18, 40, 48, 54,
60, 64
English 13
|
02 Getting Started
Connections
This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Position of the product
Place it on a stand or cabinet shelf, or
under the TV stand.
Subwoofer
Front (L)
Surround (L)
Front Speakers
Center
Front (R)
Product
Place these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the front speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers.
Surround (R)
Selecting the Listening Position
The listening position should be located
about 2.5 to 3 times the TV's screen
size away from the TV. For example, if
you have a 46 inch screen, locate the
listening position 115 to 138 inches (9.6
to11.5 feet) from the screen.
Center Speaker
Surround Speakers
Subwoofer
It is best to install the Center Speaker at the same height as the front speakers. You can also install it directly over or under the TV.
Place these speakers to the side of your listening position. If there isn't enough room, place these speakers so they face each other. Position them about 2 to 3 feet (60 to 90cm) above your ear, facing slightly downward.
* Unlike the front and center speakers, the surround speakers are used mainly for sound
effects. Sound will not come from them all the time.
The position of the subwoofer is not so critical. Place it anywhere you like.
Speaker Components
Stand Base x 2
Front x 2
|
14 English
Stand x 2
Screw (5x20) x 6
Surround x 2
Screw (5x15) x 2
Speaker Cable x 5
Center
Subwoofer
Installing the Speakers on the Tallboy Stand
1. Turn the Stand Base upside-down and connect it to
the Stand.
2. Use the driver to combine the screws (5x20) on the
3 marked holes.
1
Stand
Stand Base
03 Connections
2
3. Straighten a supplied speaker wire and put in the
hole on the center of Stand Base.
4. Connect the upper Speaker to the assembled
Stand.
5. Insert a screw (5x15) clockwise into the hole on the
rear of the speaker using a screwdriver. And then connect a speaker cable.
6. This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
3
5 6
Connecting The Speakers
1. Match each speaker cable bundle to the correct speaker by matching the color
coded plug on each bundle to the colored sticker on the bottom of each speaker.
2. To attach speaker wire to each speaker: a. Press down the red tab on the back of the speaker, insert the red wire, and then
release the tab.
b. Press down the black tab on the back of the speaker, insert the black wire, and
then release the tab.
3. Connect the speaker wire plugs from each speaker to the back of the product by
matching the colors of the speaker plugs to the colors of the speaker jacks.
4
Speaker
Black
Stand
Red
English 15
|
Connections
HDMI OUT
HDMI IN
1 2
SPEAKERS OUT
CENTER
SUBWOOFER
FRONT
L
SURROUND
L
FRONT
R
SURROUND
R
IMPEDANCE : 3
SPEAKERS OUT
CENTER
SUBWOOFER
FRONT
L
SURROUND
L
FRONT
R
SURROUND
R
IMPEDANCE : 3
Surround Speaker (R) Surround Speaker (L)
Front
Speaker (R)
Front Speaker (L)
Center Speaker
Subwoofer
| CAUTION |
If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall wherever you
want to hang a speaker, and then, using the hole in the rear of each speaker, carefully hang each speaker on a screw or nail. Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien
substances into the duct (hole) of the subwoofer speaker. Do not hang the subwoofer on the wall using the duct (hole).
| NOTES |
If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field.
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment or any other device that uses
the 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference.
|
16 English
Connecting to TV/External Devices
HDMI OUT
HDMI IN
1 2
LAN
POWER
AUX IN FM ANT
OPTICAL
DIGITAL AUDIO IN
L
R
SPEAKERS OUT
CENTER
SUBWOOFER
FRONT
L
SURROUND
L
FRONT
R
SURROUND
R
IMPEDANCE : 3
HDMI OUT
HDMI IN
1 2
LAN
AUX IN FM ANT
OPTICAL
DIGITAL AUDIO IN
L
R
OPTICAL OUT
AUDIO OUT
HDMI OUTHDMI IN
Red
R
White
W
Method 1 Method 2 Method 3
External Devices
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control and select HDMI as the external source of the TV.
Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the mode changes in this order : BD/DVD  D. IN  AUX  HDMI1  HDMI2  FM  BT
Method 1 HDMI IN : Connecting to an External Component with an HDMI cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device.  Select the HDMI1 or HDMI2 mode.
Method 2 AUX IN : Connecting an External Analog Component
Using a RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the external analog component.  Select the AUX mode.
• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
Method 3 OPTICAL : Connecting an External Digital Audio Component
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set­Top-Boxes). Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device.
Select the D. IN mode.
| NOTES |
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported
03 Connections
English 17
|
Connections
Connecting to a Network Router
You can connect your product to your network router using one of the methods illustrated below.
Wired Network
POWER
L
R
SURROUND
SURROUND
L
FRONT
FRONT
R
IMPEDANCE : 3
CENTER
SUBWOOFER
1 2
HDMI OUT
SPEAKERS OUT
Broadband modem
(with integrated router)
Or
Router
| NOTES |
Your router or your Internet Service Provider's policies
may prevent the product from accessing Samsung's software update server. If this occurs, contact your Internet Service Provider (ISP) for more information. DSL users, please use a router to make a network
connection. To use the AllShare function, you must connect your
PC to your network as shown in the illustrations on the above. The connection can be wired or wireless.
LAN
HDMI IN
AUX IN FM ANT
L
OPTICAL
R
DIGITAL
AUDIO IN
Broadband
modem
Broadband
service
Broadband
service
Wireless Network
Wireless IP sharer
Broadband
service
| NOTES |
If your wireless IP router supports DHCP, this product
can use a DHCP or static IP address to connect to the wireless network. Set your wireless IP router to Infrastructure mode. Ad-
hoc mode is not supported. The product supports only the following wireless
security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)
Select a channel on the wireless IP router that is not
currently being used. If the channel set for the wireless IP router is currently being used by another device nearby, it will result in interference and communication failure. In compliance with the newest Wi-Fi certification
specifications, Samsung home theaters do not support WEP, TKIP, or TKIP-AES (WPS2 Mixed) security encryption in networks running in the 802.11n mode. Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (AP performance, distance, obstacles, interference by other radio devices, etc).
|
18 English
E
Settings
The Initial Settings Procedure
• The Home menu will not appear if you do not configure the initial settings.
• The OSD (On Screen Display) may change in this product after you upgrade the software version.
• The access steps may differ depending on the menu you selected.
The Initial Settings Procedure lets you set the OSD and menu languages, configure the connection to your home network, choose the aspect ratio output (screen size and format) that is correct for your TV, and apply an upgrade to your product's software, if one is available. For complete Initial Settings instructions, follow the order
in the screen.
| NOTES |
If you want to display the Initial Settings screen again
and make changes, select Settings > System > Setup in the Home screen or select the Reset option.
(See page 22)
The Home Screen
Movies & TV Shows
1
2
Add App Add App Add App Web Browser Settings
3
Movies & TV Shows : Download movies and TV Shows from the Internet.
1
| NOTES |
Depending on your country, this menu
function may not be supported.
Recommended Apps : A list of useful and
2
popular apps we recommend you download.
Web Browser : You can access the Internet
3
using the Web Browser application.
Apps : Download/Access various for pay or
4
free-of-charge applications.
Apps Photos,
Videos & Music
Samsung Account d Screen Mirroring
a
Photos, Videos & Music : Play photos, videos or music content from Disc, USB, PC or mobile
5
devices.
Settings : Set various functions to suit your
6
personal preferences.
RED (A) : Press the RED (A) button on your remote to create and/or log in to your personal Samsung account.
7
BLUE (D) : Set up the wireless mirroring function between the home theater and a smart phone or tablet.
Selecting an Option on the Home Screen
1. To select an option on the Home screen, move the
cursor using the
buttons until it highlights
▲▼◄►
the option of your choice, and then press the E button.
| NOTES |
If you leave the product in the stop mode for more
than 5 minutes without using it, a screen saver will appear on your TV. If the product is left in the screen saver mode for more than 20 minutes, the power will automatically turn off.
Accessing the Settings Screen
4
1. Select Settings on the Home screen, and then
press E. The Settings screen appears.
5
6
7
Display
Audio
Network
Smart Features
System
Support
2. To access the menus, sub-menus, and options
on the Settings screen, please refer to the remote control illustration on the next page.
Display
3D Settings TV Aspect Ratio
16:9 Original BD Wise On Resolution Auto Movie Frame (24Fs) Auto DVD 24Fs Conversion Off Smart Hub Screen Size Size 3
04 Settings
English 19
|
Settings
FULL SCREEN REPEAT
TOOLS
RETURN
EXIT
INFO
MO/ST
TUNER
MEMORY
HOME
Buttons on the Remote Control Used for the Settings Menu
1
24
HOME Button : Press to move to the Home
1
screen.
RETURN Button : Return to the previous menu.
2
(Enter) / DIRECTION Button :
E
• Press an item.
3
• Press the E button to activate the currently selected item or confirm a setting.
EXIT Button : Press to exit the current menu.
4
to move the cursor or select
▲▼◄►
Detailed Function Information
Each Settings function, menu item, and individual option is explained in detail on-screen. To view an explanation, use the ▲▼◄►buttons to select the function, menu item, or option. The explanation will usually appear on the right of the screen.
A short description of each Settings function starts on this page. Additional information on some of the functions is also in the Appendix of this manual.
Settings Menu Functions
Display
Set up the 3D related functions.
3D Blu-ray Playback Mode: Select whether to play a Blu-ray Disc with 3D contents in 3D Mode. If you move to the Home or Smart
3D Settings
Hub Home menu while in 3D mode, the product will switch to 2D automatically.
Screen Size: Enter the size of the
TV attached to the product. The product will automatically adjust the 3D output to the screen size of the TV.
3
TV Aspect
Ratio
BD Wise
Resolution
Movie Frame
(24Fs)
DVD 24Fs
Conversion
Smart Hub
Screen Size
HDMI Color
Format
HDMI Deep
Color
Lets you adjust the output of the product to the screen size of your TV. See page 51.
BD Wise is Samsung’s latest inter­connectivity feature. When you connect a Samsung product and a Samsung TV with BD Wise to each other via HDMI, and BD Wise is on in both the product and TV, the product outputs video at the video resolution and frame rate of the Blu-ray/DVD Disc.
Lets you set the output resolution of the HDMI video signal to
BD Wise, Auto, 1080p, 1080i, 720p, 480p. The number indicates
the number of lines of video per frame. The i and p indicate interlaced and progressive scan, respectively. The more lines, the higher quality.
Setting the Movie Frame (24Fs) feature to Auto lets the product adjust its HDMI output to 24 frames per second automatically for improved picture quality if attached to a 24Fs compatible TV.
• You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate.
• Movie Frame is only available when the product is in the HDMI 1080p output resolution modes.
Converts DVD playback to 24 frames per second and outputs it via HDMI. This option is only available when Movie Frame (24Fs) is set to on.
Lets you select the optimal size for the Smart Hub Screen.
Lets you set the color space format for the HDMI output to match the capabilities of the connected device (TV, monitor, etc).
Lets you set the product to output video from the HDMI OUT jack with Deep Color. Deep Color provides more accurate color reproduction with greater color depth.
|
20 English
Progressive
Mode
Simple
Speaker
Setup
Speaker Settings
Equalizer
Smart Volume
Lets you improve picture quality when viewing DVDs.
Audio
Lets you configure the settings of the speakers you have connected to obtain the best possible surround sound.
Normal Mode
have set up your speakers in the recommended speaker layout with the surround speakers next to or behind the listening positions.
Simple Mode
put your surround speakers in front of the listening position. Downmixes the front sound to the surround sound speakers.
| NOTES |
DPLII, SFE, Virtual 7.1 will not
operate when the simple mode is on.
Lets you adjust the following speaker settings and turn the test tone on and off so you can test the speakers.
Level
loudness of each speaker from 6db to -6db. For example, if you like deep bass, you can increase the loudness of the subwoofer by 6db.
Distance
relative distance of each speaker from the listening position up to 30 feet. The farther the distance, the louder the speaker will be.
Test Tone
Tone function so you can test your adjustments. Setting Test Tone to On turns the Test Tone on. Setting it to Off turns it off.
Lets you configure the Equalizer settings manually.
Lets you set the product so that the volume remains stable when a scene change occurs or when you change the channel.
: Select if you
: Select if you have
: Lets you adjust the relative
: Lets you adjust the
: Lets you run the Test
Speaker
Selection
Audio Return
Channel
Digital Output
Dynamic
Range
Control
Downmixing
Mode
Lets you select which speakers you want active, either the TV's speakers or the Home theater's speakers.
Lets you direct the sound from the TV to the Home Theater speakers. Requires an HDMI connection and an Audio Return Channel (ARC) compatible TV.
• If Audio Return Channel is set to on and you are using an HDMI cable to connect the product to the TV, digital optical input will not work.
• If Audio Return Channel is set to auto and you are using an HDMI cable to connect the product to the TV, ARC or digital optical input is selected automatically.
Lets you set the Digital Output to match the capabilities of the AV receiver you’ve connected to the product. For more details, please refer to the digital output selection table. (See page 53)
Lets you apply dynamic range control to Dolby Digital, Dolby
Digital Plus, and Dolby TrueHD audio.
Auto: Automatically controls the dynamic range of Dolby TrueHD audio, based on information in the Dolby TrueHD soundtrack. Also turns dynamic range control off for Dolby Digital and Dolby Digital Plus.
Off: Leaves the dynamic range
uncompressed, letting you hear the original sound.
On: Turns dynamic range control on
for all three Dolby formats. Quieter sounds are made louder and the volume of loud sounds is reduced.
Lets you select the multi-channel downmix method that is compatible with your stereo system. You can choose to have the product downmix to normal stereo or in surround compatible stereo.
04 Settings
English 21
|
Settings
Audio Sync
Network
Status
Network Settings
Wi-Fi Direct
AllShare Settings
Device Name
BD-Live
Settings
|
22 English
When the product is attached to a digital TV, lets you adjust the audio delay so that the audio syncs with the video. You can set the delay between 0 and 300 milliseconds.
Network
Lets you check the current network and Internet status.
Configure the network connection so you can enjoy various features such as Internet services or AllShare Wi-Fi functionality, and perform software upgrades.
Lets you connect a Wi-Fi Direct device to the product using a peer­to-peer network, without the need for a wireless router. Note that if the product is connected to a wireless network, it may be disconnected when you use Wi-Fi Direct.
| NOTES |
Text files, such as files with a .TXT
or .DOC extension, will not display when you are using the Wi-Fi Direct function.
Lets you control which devices on your network, such as smart phones and tablets, can share content with your TV.
Lets you assign an identifying name to the product. You use this name to identify the product when you are connecting external Wi-Fi devices (smart phones, tablets, etc.) to it.
Set various BD-Live functions. BD-Live allows you to access extra features available on some Blu-ray Discs if you are connected to the Internet.
BD-Live Internet Connection : Lets you fully allow, partly allow, or prohibit a BD-Live Internet connection.
BD Data Management : Manage
BD data downloaded from a BD­Live service or Blu-ray Disc.
Apps Settings
VOD Rating
Lock
Terms &
Conditions,
Privacy Policy
Reset Smart
Hub
Setup
Language
Device
Manager
Smart Features
Lets you configure App notification settings and view basic info about your Apps.
Push Notification Settings : Receive notifications from selected services.
Properties : See basic info about
Apps.
You can lock access to Video on Demand (VOD) content based on its rating.
| NOTES |
The default security PIN is 0000
Depending on your country,
this menu function may not be supported.
Lets you view the Smart Hub Terms and Conditions and Privacy Policy.
Resets all Smart Hub settings to their default settings.
| NOTES |
The default security PIN is 0000.
System
Lets you re-run the Initial Settings procedure.
You can select the language you prefer for the On-Screen menu, disc menu, subtitles, etc.
• The language you select for the disc menu, disc audio, or subtitles will only appear if it is supported on the disc.
You can connect a wireless USB keyboard or mouse to the USB port on the front of the product.
Keyboard Settings: Lets you configure a wireless USB keyboard connected to the product.
| NOTES |
You can use the keyboard only
when a QWERTY keyboard screen or window appears in the Web Browser.
Mouse Settings : Lets you configure a wireless USB mouse connected to the product. You can use the mouse in the product's menu in the same way you use a mouse on your PC.
Security
To use a mouse with the
product's menu :
1. Connect the USB mouse to
product
the
2. Click the primary button you
selected in Mouse Settings. The Simple Menu appears.
3. Click the menu options you
want.
| NOTES |
Some USB HID keyboards and
mice may not be compatible with your product. Some HID keyboard keys may
not work. Wired USB keyboards are not
supported. Some applications may not be
supported. If a wireless HID Keyboard does not
operate because of interference, move the keyboard closer to the product.
The default security PIN is 0000. Enter the default PIN to access the security function if you haven't created your own PIN.
BD Parental Rating: Prevents playback of Blu-ray Discs with a rating equal to or above a specific age rating you enter unless the PIN is entered.
DVD Parental Rating: Prevents
playback of DVDs with a rating above a specific numerical rating you select unless the PIN is entered.
Change PIN: Changes the 4-digit
PIN used to access security functions.
If you forget your PIN
1. Remove any disc or USB
storage device.
2. Press and hold the 5 button
on the front panel for 5 seconds or more. All settings will revert to the factory settings.
| NOTES |
When the factory default settings
are restored, all the user stored BD data will be deleted.
.
General
Anynet+
(HDMI-CEC)
Remote
Management
Software
Update
Use Mode
Contact
Samsung
You can specify the display brightness and time zone.
Front Display: Lets you change the
brightness of the front panel.
Time Zone: You can specify the
time zone that is applicable to your area.
Menu Transparency: Adjust the
transparency of the menu box.
Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature and lets you control those products with one Samsung TV remote. To operate this function, you must connect this product to an Anynet+ Samsung TV using an HDMI cable.
If you want to use an Anynet+ (HDMI-CEC) function, please follow the instructions below.
Connect the product to an
1)
Anynet+ (HDMI-CEC)-compliant Samsung TV using HDMI Cable.
Set the Anynet+ (HDMI-CEC)
2)
feature to On in both the TV and the product.
Search for and then select the
3)
product in the TV's Anynet+ (HDMI-CEC) list. For more exact instructions, see the Anynet+ section of the TV's user's manual.
Support
When activated, lets Samsung Call Center agents diagnose and fix problems with the product remotely. Requires an active Internet connection. Remote Management service might not be available in some countries.
For more information about the Software Update function, see "Upgrading Software" on page 27.
Lets you set the Use mode. If you are using the home theater at home, always select Home. Store is for retail display settings only.
Provides contact information for assistance with your product.
04 Settings
English 23
|
Settings
Reverts all settings to their defaults except for the network and Smart
Reset
Hub settings, and then starts the Setup function. Requires that you enter your security PIN. The default security PIN is 0000
Networks and the Internet
When you connect this product to a network, you can use network based applications and functions such as Smart Hub and BD-LIVE, and upgrade the product's software through the network connection. For more information about accessing and using Internet services, see the Network Services chapter of this manual on pages 42~50. Instructions for configuring the network connection start below.
Configuring your Network Connection
If you didn't configure your network connection during the initial settings procedure or you need to reset the network connection, follow the directions below.
Before you begin, contact your Internet Service Provider to find out if your IP address is static or dynamic. If it is dynamic, and you have a wired or wireless network, we recommend using the Automatic configuration procedures described below.
If you are connecting to a wired network, connect the product to your router using a LAN cable before you start the configuration procedure.
To begin configuring your network connection, follow these steps:
1. In the Home screen, select Settings, and then
press the E button.
2. Select Network, and then press the E button.
3. Select Network Settings, and then press the E
button.
4. Go to the instructions for Wired networks starting
below or the instructions for Wireless networks starting on page 25.
Wired Network
Wired – Automatic
After following Steps 1 to 3 above:
1. In the Network Settings screen, change Network type to Wired. Then, select Connect and press
the E button. The product detects the wired connection, verifies the network connection and then connects to the network.
2. When it is done, highlight OK, and then press E
button.
Wired - Manual
If you have a static IP address or the automatic procedure does not work, you'll need to set the Network Settings values manually.
After following Steps 1 to 3 above:
1. In the Network Settings screen, change Network type to Wired. Then, select Connect and press the
E
button. The product searches for a network, and then displays the connection failed message.
| NOTES |
If it is possible to connect the home theater to your
network wirelessly, select Change Network at this point, change the Network Type to Wireless, and then go to the instructions for wireless networks on page 25.
Network Settings
Wired network connection failed.
Unable to connect to the network. Try the following: check if your IP address is set correctly in IP Settings. Contact your Internet Service Provider for more information.
MAC Address XX:XX:XX:XX:XX:XX IP Address 0. 0. 0. 0 Subnet Mask 0. 0. 0. 0 Gateway 0. 0. 0. 0 DNS Server 0. 0. 0. 0
IP SettingsChange Network Retry Close
2. Use the ◄► buttons to select IP Settings, and
then press the E button. The IP Settings screen appears.
3. Select the IP Setting field, and then set it to Enter manually.
4. Select a value to enter (IP Address, for example),
and then press E. Use the number keypad on your remote control to enter the numbers for the value. You can also enter numbers using the ▲▼ buttons. Use the ◄► buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the E button.
5. Press the ▲ or ▼ button to move to another value, and then enter the numbers for that value following the instructions in Step 4.
6. Repeat Steps 4 and 5 until you have filled in all values.
|
24 English
| NOTES |
You can get the Network values from your Internet
provider.
7. When finished entering all the values, select OK,
and then press the E button. The home theater verifies the network connection and then connects to the network.
Wireless Network
You can setup a wireless network connection in three ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
Before you configure the wireless network connection, disconnect any wireless network device currently connected to the product or, if applicable, the product's current wired connection.
Wireless - Automatic
After following Steps 1 to 3 in "Configuring Your Network Connection" on page 24:
1. In the Network Settings screen, change Network type to Wireless. Then, select Connect and press
the E button. The product searches for and then displays a list of the available networks.
Select your network type.
Network type Wireless
Wireless Network
si-ap iptime iptime5G KIMING_VTOWER TIAS
2. Select the desired network, and then press the E button.
3. On the Security screen, enter your network's security code or pass phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with ▲▼◄► buttons, and then pressing E button.
4. When finished, select Done, and then press the E button. The product verifies the network connection and then connects to the network.
Network Settings
WPS(PBC) Refresh
You can connect your TV to the internet. Please select which wireless network to use.
Please select your preference.
| NOTES |
You should be able to find the security code or pass
phrase on one of the set up screens you used to set up your router or modem.
Wireless - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
After following Steps 1 to 3 in "Configuring Your Network Connection" on page 24:
1. In the Network Settings screen, change Network type to Wireless. Then, select Connect and press
the E button. The product searches for and then displays a list of the available networks.
2. Scroll through the list, select the desired network or Add Network, and then press the E button.
3. If you selected a network in Step 2, go to Step 6. If you selected Add Network, go to Step 4.
4. Enter your wireless network or wireless router's
name.
• Enter numbers directly using the number buttons
on your remote control.
• Enter letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the E button.
• To display capital letters (or redisplay small letters
if capital letters are displayed), select
, and
then press the E button.
• To display symbols and punctuation, select
123#&, and then press the E button. To redisplay letters, select 123#&, and then press the E button.
When finished, select Done, and then press the
button.
E
5. On the Security type screen that appears, use the ▲▼buttons to select the network's Security type, and then press the E button. On the next screen, enter your network's security code or pass phrase.
• Enter numbers directly using the number buttons
on your remote control.
• Enter letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the E button.
When finished, select Done, and then press the
button. The product searches for the network.
E
6. The Network connection fail screen appears. Use ◄► buttons to select IP Settings, and then press the E button.
04 Settings
English 25
|
Settings
7. Select the IP Setting field, and then set it to Enter manually.
8. Select a network value to enter (IP Address, for
example), and then press E button. Use the number keypad on your remote control to enter the numbers for the value. You can also enter numbers using the ▲▼ buttons. Use the ◄► buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the
E
button.
9. Press the ▲ or ▼ button to move to another value, and then enter the numbers for that value following the instructions in Step 8.
10. Repeat Steps 8 and 9 until you have filled in all values.
| NOTES |
You can get the Network values from your Internet
provider.
11. When finished, select OK, and then press the E button. The Security Screen appears.
12. On the Security screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.
13. When finished, select Done at the right of the screen, and then press the E button. The product verifies the network connection and then connects to the network.
14. After the home theater verifies the network, select OK, and then press the E button.
| NOTES |
You can also begin the Manual Network setting by
going to Settings >Network > Network Status.
WPS(PBC)
One of the easiest ways to set up the wireless network connection is using the WPS(PBC) function. If your wireless router has a WPS(PBC) button, follow these steps:
After following Steps 1 to 3 in "Configuring Your Network Connection" on page 24:
1. In the Network Settings screen, change Network type to Wireless. Then, select Connect and press
the E button. The product searches for and then displays a list of the available networks.
2. Scroll the list down, select WPS(PBC), and then
press the E button.
3. Press the WPS(PBC) button on your router within
two minutes. Your product automatically acquires all the network settings values it needs and connects to your network. The product connects to the network after the network connection is verified.
4. When it is done, highlight OK, and then press E
button.
| NOTES |
For WPS connection, set your wireless router’s
security encryption to AES. Setting to WEP security encryption does not support WPS connection.
Wi-Fi Direct
The Wi-Fi Direct function allows you to connect Wi-Fi Direct devices to the product and each other using a peer-to-peer network, without a wireless router.
| NOTES |
Some Wi-Fi Direct devices may not support the
AllShare function if connected via Wi-Fi Direct. If this is the case, change the network connection method you used to connect the device to the home theater. Wi-Fi Direct transmissions can interfere with the
Bluetooth signal. Before you use the Bluetooth function, we strongly recommend that you turn off the Wi-Fi Direct function on any device in which it is currently on.
1. Turn on the Wi-Fi direct device and activate its Wi-Fi
Direct function.
2. In the Home screen, select Settings, and then
press the E button.
3. Select Network, and then press the E button.
4. Select Wi-Fi Direct, and then press the E button.
The Wi-Fi Direct devices that you can connect appear.
Device Name : [HTS]-F6530 Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX Disconnected
Wi-Fi Direct
Refresh
Close
|
26 English
5. You have three ways to complete the Wi-Fi
connection:
• Through the Wi-Fi device.
• Through the product using PBC.
• Through the product using a PIN. Each is covered below.
Through the Wi-Fi Device
1. On the Wi-Fi device, follow the device's procedure
for connecting to another Wi-Fi Direct device. See the device's user manual for instructions.
2. When you have completed the procedure, you
should see a pop-up on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Select OK, and then press the E button to accept.
3. The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.
• The PBC and PIN procedures connect devices automatically.
Through the Product Using PBC
1. Select the Wi-Fi Direct device you want to connect
to this product, and then press the E button.
2. The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.
Through the Product Using a PIN
1. Select the Wi-Fi Direct device you want to connect
to this product, and then press the E button.
2. The PIN pop-up appears.
3. Note the PIN code in the pop-up, and then enter it
into the appropriate field in the Wi-Fi Direct device you want to connect.
4. The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.
| NOTES |
The current wired or wireless network connection
will be disconnected when you use the Wi-Fi Direct function. Text files, such as files with a .TXT or .DOC extension,
will not display when you are using the Wi-Fi Direct function.
Upgrading Software
The Software Update menu allows you to upgrade the product’s software for performance improvements or additional services.
• Never turn the product off or back on manually during the update process.
1. In the Home menu, select Settings, and then press
the E button.
2. Select Support, and then press the E button.
3. Select Software Update, and then press the E
button.
4. To download update software and update now, select Update now, and then press the E button. See "Update now" on this page for details.
5. To let the product download update software automatically when available, select Auto Update, and then press the E button. See "Auto Update" on the next page for details.
| NOTES |
The upgrade is complete when the product turns off,
and then turns on again by itself. Samsung Electronics takes no legal responsibility for
product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade. If you want to cancel the upgrade while the upgrade
software is downloading, press the E button. When a system upgrade is in progress, "UPDATE" is
displayed on the front panel.
Update now
You can use Update now to update the software through your network connection or by using a USB flash drive. The network instructions are below. The USB flash drive instructions are on the next page.
1. Select Update now, and then press the E button. The Update now pop-up appears.
2. The product searches on line for the latest software version.
3. If it does not find an update, the "There are no new updates for you at the moment." pop-up appears. Press the E button to exit.
4. If it finds a new version, the Update Request pop­up appears.
5. Select OK. The product upgrades the software, turns off, and then turns on automatically.
04 Settings
English 27
|
Settings
6. If you do not select OK or Cancel in one minute,
the product stores the new upgrade software. You can upgrade the software later using Auto Update.
7. If you select Cancel, the product cancels the
upgrade.
| NOTES |
When the system upgrade is done, check the
software details in the Product Information section of the Contact Samsung screen. Do not turn off the product during the software
upgrade. It may cause the product to malfunction.
Auto Update
You can set the Auto Update function so that the product downloads new upgrade software when it is in Auto Update mode.
In Auto Update mode, the product is off, but its Internet connection is active. This allows the product to download upgrade software automatically, when you are not using it.
1. Press the ▲▼ buttons to select Auto Update Mode, and then press the E button.
2. Select On or Off.
If you select On, the product will automatically download new upgrade software when it is in Auto Update mode with the power off. If it downloads new upgrade software, the product will ask you if you want to install it when you turn the product on.
| NOTES |
To use the Auto Update function, your product must
be connected to the Internet.
Update by USB
1. Visit www.samsung.com.
2. Click SUPPORT on the top right of the page.
3. Enter the product's model number into the search
field. As you enter the model number, a drop down will display products that match the model number.
4. Left click your product's model number in the drop down list.
5. On the page that appears, scroll down to and then click Firmware Manuals & Downloads.
6. Click Firmware in the center of the page.
7. Click the ZIP button in the File column on the right
side of the page.
8. Click Send in the first pop-up that appears. Click OK in the second pop-up to download and save the firmware file to your PC.
9. Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file.
10. Copy the folder to a USB flash drive.
11. Make sure no disc is inserted in the product, and
then insert the USB flash drive into the USB port of the product.
12. In the product’s menu, go to Settings > Support > Software Update.
13. Select Update now.
14. The product searches for the software on the
USB drive. When it finds the software,the Update Request pop-up appears.
15. Select OK. The product upgrades the software, turns off, and then turns on automatically.
| NOTES |
There should be no disc in the product when you
upgrade the software using the USB jack. When the system upgrade is done, check the
software details in the Product Information section of the Contact Samsung screen. Do not turn off the product during the software
upgrade. It may cause the product to malfunction. Software upgrades using the USB jack must be
performed with a USB flash drive only.
|
28 English
Apps
Phot
V
us
Phot
o
i
Media Play
Your home theater can play content located on Blu-ray/ DVD/CD discs, USB devices, PCs, smart phones, tablets, and on the Web.
To play content located on your PC or a mobile device, you must connect the PC or mobile device and the product to your network. To play content on your PC, you must also download and install AllShare network software or already have DNLA network software on your PC.
| NOTES |
PCs running Windows 7 and Windows 8 have DLNA
software (Play To) built in.
The All Content Screen
For all media, the All Content screen or one of its sub screens is your primary means of accessing and playing contents saved on a variety of devices, either connected directly or using your network.
Using the All Content Screen
To access the All Content screen, select Photos, Videos & Music on the Home screen, and then press the E button.
Playing Commercial Discs
1. Press the  button to open the disc tray.
2. Place a disc gently into the disc tray with the disc’s
label facing up.
3. Press the  button to close the disc tray.
Playback starts automatically.
4. If playback does not start automatically, press the
button on the remote or see “The All Content
6
Screen” above.
Playing Files on a USB Device
There are two methods you can use to play or view multimedia files located on a USB device through your product.
Method 1
1. Turn the product on.
2. Connect the USB device to the USB port on
the front panel of the product. The New Device Connected pop-up appears.
Movies & TV Shows
Add App Add App Add App Web Browser Settings
|
NOTES
|
If the pop-up does not appear, go to Method 2.
3. Use the ▲▼ buttons to select Videos, Photos, Music or All, and then press the E button.
Depending on how the contents are arranged, you will see either folders, individual files, or both.
| NOTES |
Even though the product will display folders for all
content types, it will only display files of the Content Type you selected in Step 3. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the All Share Play screen, and then going to Step 4 in Method 2 below.
4. If necessary, use the ▲▼◄► buttons to select a folder, and then press the E button.
5. Select a file to view or play, and then press the E button.
6. Press the RETURN button to exit a folder or the Exit button to return to the Home screen.
7. Go to pages 31~39 for instructions that explain how
to control playback of videos, music, and pictures on a USB device.
Apps Photos,
New device connected.
USB Flash Disk
Videos Photos Music All
Videos &
ide
Music
M
Method 2
1. Turn the product on.
2. Connect the USB device to the USB port on the
front panel of the product.
3. Select Photos, Videos & Music on the Home screen, and then press the E button.
4. Select Photos, Videos, Music or All Content, and then press the E button. Depending on how the contents are arranged, you will see either folders, individual files, or both.
05 Media Play
English 29
|
Media Play
| NOTES |
Even though the product will display folders for all
content types, it will only display files of the Content Type you selected in Step 4. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the All Share Play screen and repeating Step 4.
5. Use the ◄► buttons to select the desired device
and then press the E button.
6. If necessary, use the ▲▼◄► buttons to select a
folder, and then press the E button.
7. Press the RETURN button to exit a folder or the Exit button to return to the Home screen.
8. Go to pages 31~39 for instructions that explain how
to control playback of videos, music, and pictures on a USB device.
| NOTES |
If you insert a disc when playing a USB device
or phone, the device mode changes to "Disc" automatically. If your cellular phone is DLNA compatible, you can
play contents without connecting a USB cable. See "Using the AllShare Network Function" on page 30.
Playing a Disc with User Recorded Content
You can play multimedia files you have recorded on Blu­ray, DVD, or CD discs.
1. Place a user recorded disc into the disc tray with the disc’s label facing up, and then close the tray. The Device Connected pop-up appears.
2. Use the ▲▼ buttons to select the type of content you want to view or play - Videos, Photos, or Music
- and then press the E button.
| NOTES |
Even though the product will display folders for all
content types, it will only display files of the Content Type you selected in Step 2. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the Home screen and repeating Step 2.
3. A screen appears listing the contents of the disc. Depending on how the contents are arranged, you will see either folders, individual files, or both.
4. If necessary, use the ▲▼◄►buttons to select a folder, and then press the E button.
5. Use the ▲▼◄► buttons to select a file to view or
play, and then press the E button.
6. Press the RETURN button one or more times to
exit a current screen, exit a folder, or to return to the Home screen. Press the Exit button to return directly to the Home Screen.
7. Go to pages 31~39 for instructions that explain how
to control playback of videos, music, and pictures on a disc.
Using the AllShare Network Function
AllShare lets you play Videos, Photos, or Music located on your PC or your DLNA compatible device through the product using a wireless network connection.
To Download the AllShare Software
To use AllShare with your PC, you must install AllShare software on your PC. You can download the PC software and get detailed instructions for using AllShare from the Samsung.com website.
1. Go to www.samsung.com.
2. Click Support at the top of the page.
3. On the Support page, enter the model number of
your product into the Model Number field, and then press the E button.
4. On the page that appears, click See All Downloads
on the left side of the screen under Downloads. The Download Tab appears.
5. On the Download Tab, click Software.
6. In the list of software, click the EXE button on the
right side of the AllShare line.
7. In the pop-up that appears, click the Send button.
8. In the next pop-up, click Save File.
9. Find the AllShare install file on your disk, and then
double click the file.
10. In the pop-up that appears, click Run, and then
follow the directions that appear on your screen.
Download the AllShare Installation/Instruction manual from the same Software Tab by clicking the corresponding PDF file symbol in the File column on the right. The file, in PDF format, will download and open. You can view and/ or save the file.
|
30 English
Loading...
+ 88 hidden pages