Samsung HT-DB660 User Manual
DIGITAL HOME
THEATER SYSTEM
HT-DB660
TV DVD RECEIVER
OPEN/CLOSE
DISC SKIP TUNER AUX
EZ VIEW
SLOW
TUNING/CH
PL II MODE PL II EFFECT
R
E
T
U
R
N
M
E
N
U
I
N
F
O
M
U
T
E
SURR.
PLUS
V-H/P
SUPER 5.1
ENTER
SOUND EDIT
TEST TONE
SLEEP
LOGO REPEAT
CANCEL ZOOM
P.SCAN
REMAIN
TUNER
MEMORY
VOLUME
DVD
RRSSLSM +
LSM –
BAND
MO/ST
TV/VIDEO MODE
DIMMER
V I D E O
COMPACT
DIGITAL AUDIO
COMPACT
DIGITAL VIDEO
Instruction Manual
SAMSUNG ELECTRONICS AMERICA, INC.
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
www.samsungusa.com
12
Safety Warnings
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which can cause electric shock is present inside
this unit.
This symbol alerts you to important operating and maintenance instructions accompanying
the unit.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE REAR COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
Note to CATV system installer :
This reminder is provided to call the CATV system
installer’s attention to Section 820~40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical
Precautions
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply,
remove the main plug from the wall outlet, especially when left unused for a long period of time.
Protect the player from moisture(i.e. vases) , and excess
heat(e.g.fireplace) or equipment creating strong magnetic or electric
fields (i.e.speakers...). Disconnect the power cable from the AC supply if
the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household trash.
PREPARATION
4
Safety Instructions
3
READ INSTRUCTIONS
All the safety and operating instructions should be
read before the appliance is operated.
RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
HEED WARNINGS
All warnings on the appliance and in the operating
instructions should be adhered to.
FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
WATER AND MOISTURE
Do not use this video product near waterforexample, near a bathtub, wash bowl,
kitchen sink, or laundry tub, in a wet basement,
or near a swimming pool, and the like.
OVERLOADING
Do not overload wall outlets and extension cords as
this can result in the risk of fire
or electric shock.
VENTILATION
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
video product and to protect it from overheating
these openings must not be blocked or covered.
The openings should never be blocked
by placing the video product on a bed, sofa, rug, or
other similar surface. This video product
should never be placed near or over a radiator or
heat register.
This video product should not be placed
in a built-in installation such as a bookcase
or rack unless proper ventilation is provided
or the manufacturer's instructions have been
followed.
POWER CORD PROTECTION
Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them paying
particular attention to cords at plugs,
convenience receptacles, and the point where
they exit from the appliance.
CLEANING
Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
LIGHTNING
For added protection of this video product
receiver during a lightning storm, or when
it is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system.
This will prevent damage to the video product
due to lightning and power-line surges.
OBJECT AND LIQUID ENTRY
Never push objects of any kind into this
product through openings as they may touch
dangerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the video
product.
ACCESSORIES
Do not place this video product on an unstable cart,
stand, tripod, bracket, or table.
The video product may fall, causing serious injury to
a child or adult, and serious damage
to the appliance.
Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer,
or sold with the video product. Any mounting
of the appliance should follow the manufacturer's
instructions and should use a mounting accessory
recommended by the manufacturer.
CART
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.
POWER SOURCES
This video product should be operated only from the
type of power source indicated
on the marking label. If you are not sure
of the type of supply to your home, consult your
appliance dealer or local power company.
For video products intended to be operated from
battery power, or other sources, refer
to the operating instructions.
POWER LINES
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits,
or where it can fall into such power lines
or circuits. When installing an outside antenna
system, extreme care should be taken to keep from
touching such power lines or circuits as contact with
them might be fatal.
POLARIZATION
This video product is equipped with a polarized
alternating current line plug (a plug having one blade
wider than the other.) This plug will fit into the power
outlet only one way.
This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing
the
plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
OUTDOOR ANTENNA GROUNDING
•
If an outside antenna is connected to the
antenna terminal, be sure the antenna system
is grounded so as to provide some protection
against voltage surges and built-up static
charges.
•
In the U.S.A section 810 of the National
Electrical Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
See the figure below.
ATTACHMENTS
Do not use attachments not recommended
by the video product manufacturer as they may
cause hazards.
SERVICING
•
Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
•
Refer all servicing to qualified service personnel.
REPLACEMENT PARTS
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or having the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
SAFETY CHECK
Upon completion of any service or repairs
to this video product, ask the service technician to
perform safety checks to determine that the video
product is in proper operating condition.
DAMAGE REQUIRING SERVICE
Unplug this video product from the wall outlet
and
refer servicing to qualified service personnel
under the
following conditions.
a.
When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have
fallen into the video product.
c. If the video product has been exposed to rain
or water
d.
If the video product does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as an improper
adjustment of other controls may result
in damage and will often require extensive
work by a qualified technician to restore
the video product to its normal operation.
e. If the video product has been dropped
or the cabinet has been damaged.
f. When the video product exhibits a distinct
change in performance - this indicates
a need for service.
HEAT
This video unit should be situated away from heat
sources such as radiators, stoves, or other products
(including amplifiers) that propduce heat.
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION. 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
PREPARATION
6
Features
5
PREPARATION
Contents
PREPARATION
Safety Warnings..................................................................................................................................................................1
Precautions .........................................................................................................................................................................2
Safety Instructions ..............................................................................................................................................................3
Features..............................................................................................................................................................................5
Notes on Discs....................................................................................................................................................................7
Description ..........................................................................................................................................................................9
CONNECTIONS
Connecting the Speakers....................................................................................................................................................13
Mounting the Speakers to a Wall ........................................................................................................................................15
Connecting the Video to TV ................................................................................................................................................16
P.SCAN(Progressive Scan) Function .................................................................................................................................17
Connecting the Antennas....................................................................................................................................................18
Connecting External Components ......................................................................................................................................19
Before Using Your DVD Player...........................................................................................................................................21
OPERATION
Disc Playback .....................................................................................................................................................................23
Selecting a Disc in the Disc changer ..................................................................................................................................24
Displaying Disc Information ................................................................................................................................................25
Checking the Remaining Time............................................................................................................................................26
Fast/Slow Playback.............................................................................................................................................................27
Skipping Scenes/Songs ......................................................................................................................................................28
Repeat Playback.................................................................................................................................................................29
A-B Repeat Playback..........................................................................................................................................................30
Angle Function ....................................................................................................................................................................31
Zoom Function ....................................................................................................................................................................32
Selecting Audio/Subtitle Language .....................................................................................................................................33
Moving Directly to a Scene/Song........................................................................................................................................34
Using Disc Menu.................................................................................................................................................................35
Using the Title Menu ...........................................................................................................................................................36
SETUP
Setting the Language..........................................................................................................................................................37
Setting TV Screen type .......................................................................................................................................................39
Setting Parental Controls (Rating Level).............................................................................................................................41
Setting the Password ..........................................................................................................................................................43
Setting the Wallpaper..........................................................................................................................................................45
Setting the Speaker Mode ..................................................................................................................................................47
Setting the Test Tone..........................................................................................................................................................48
Setting the Delay Time........................................................................................................................................................49
Setting the Audio Quality ....................................................................................................................................................51
Setting the DRC (Dynamic Range Compression)...............................................................................................................53
Dolby Pro Logic II Mode......................................................................................................................................................55
Dolby Pro Logic II Effect .....................................................................................................................................................56
Setting the RRSS(Rear Reflecting Surround System)........................................................................................................57
Rear Reflecting Surround System ......................................................................................................................................59
Live Surround Mode ...........................................................................................................................................................60
SURR. PLUS / Virtual Headphone......................................................................................................................................61
SUPER 5.1..........................................................................................................................................................................62
RADIO OPERATION
Listening to Radio ...............................................................................................................................................................63
Presetting Stations..............................................................................................................................................................64
MISCELLANEOUS
Convenient Functions .........................................................................................................................................................65
Operating the TV with the Remote Control .........................................................................................................................67
Before Calling for Service ...................................................................................................................................................69
Cautions on Handling and Storing Discs ............................................................................................................................71
Specifications......................................................................................................................................................................72
Notes on Terminology.........................................................................................................................................................73
Warranty .............................................................................................................................................................................74
Multi-Disc Playback & AM/FM Tuner
The HT-DB660 combines the convenience of multi-disc playback capability, including DVD, VCD, CD,
MP3-CD, CD-R, CD-RW, and DVD-RW, with a sophisticated AM/FM tuner, all in a single player.
Super Digital Sound Master
Equipped with new digital audio technology (auto sound calibration, magic sound
field, and magic headphone) developed in cooperation with DiMagic Co., Ltd., you
will enjoy a more spacious sound wityh better control.
Built-in 5.1-Channel Amplifier
The HT-DB660 comes with a built-in 5.1-channel amplifier, allowing you to enjoy dynamic sound.
Sound Logo
When power is turned on, a sound logo is output from speakers to notify the user that the unit is
optimized for disc playback.
Power Saving Function
The HT-DB660 automatically shuts itself off after 20 minutes in the stop or pause mode.
TV Screen Saver Function
The HT-DB660 automatically brightens and darkens the brightness of the TV screen after 2 minutes
in the stop or pause mode.
Customized TV Screen Display
The HT-DB660 allows you to select your favorite image during JPEG, DVD, or VCD playback and set
it as your background wallpaper.
RRSS (Rear Reflecting Surround System)
The sound from the rear speaker is reflected against the side and rear walls before reaching the
listener to produce realistic sound as if you have installed an actual 5.1-channel speaker system.
Auto Sound Calibration
By setting the auto sound calibration function just once when you relocate or install the unit, you can
have the unit automatically recognize the distance between speakers, levels between channels, and
frequency characteristics to create a 5.1-channel sound field optimized for the listener's environment.
CD-R Discs
•
Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs
may not be playable.
•
Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.
•
If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
•
Only the CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
CD-R JPEG Discs
•
Only files with the ".jpeg" and ".JPEG" extensions can be played.
•
If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
•
Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
•
JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
•
Only a consecutively written multi session disc can be played. If there is a blank segment in the multi session disc, the
disc can be played only up to the blank segment.
•
A maximum of 9,999 images can be stored on a single CD.
•
When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
•
Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
Disc Recording Format
8
CD-R MP3 Discs
•
Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
•
MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
•
Use discs recorded with a compression/decompression data rate greater than 128Kbps.
•
Only files with the ".mp3" and ".MP3" extensions can be played.
•
Only a consecutively written Multi session disc can be played. If there is a blank segment in the Multi session disc,
the disc can be played only up to the blank segment.
•
If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
•
For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate
(e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
•
If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
•
If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.
What is MP3?
MP3 is short for MPEG-1 Audio Layer 3 and MPEG is an acronym for Moving Pictures Experts
Group. MP3 is a file format with compression ratio of 1:12 (128 Kbps*) That is, you can use MP3
format to record about 12 times the usual amount of data on a regular CD.
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
V I D E O
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
1 6
~
Mark (Logo)
Audio + Video
DVD
VIDEO-CD
AUDIO-CD
5"
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
74 min.
20 min.
74 min.
20 min.
3 1/2"
5"
3 1/2"
5"
3 1/2"
Audio + Video
Audio
Recorded Signals
Disc Type Disc Size Max. Playing Time
•
LD, CD-G, CD-I, CD-ROM and DVD-ROM cannot be played on this player.
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
•
DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
7
Notes on Discs
DIGITAL
SOUND
NTSC
STEREO
Dolby Digital
disc
DTS disc Digital Audio
disc
Stereo disc
NTSC video format
NTSC is used in all of North
America, the Philippines,
South Korea and Japan.
MP3 disc
Playable Discs
Do not use the following types of disc!
•
Many DVD discs are encoded with copy protection. Because of this, you should only connect your
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
•
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Copy Protection
PREPARATION
V I D E O
COMPACT
DIGITAL VIDEO
COMPACT
DIGITAL AUDIO
—Rear Panel—
—Front Panel—
TITLE
PRGM
CHAP TUNED
REPEAT 1
ALL DISC
5.1
CH
TITLE PBC
CHAP
PRGM
RDS
RT
TA
EX
CMX
L C R
SW
LS S RS
ST
kHz
MHz
LINEAR PCM
PBC
SURROUND
A B
DSP
DOLBY DIGITAL indicator
PRO LOGIC indicator
P.SCAN indicator
SURROUND indicator
TITLE indicator
PRGM indicator
CHAPTER indicator
DISC(1~5) indicator
5.1CH indicator
REPEAT indicator
DISC indicator
TUNER indicator
DSP indicator
9
Description
Power ( ) button
Standby indicator
Function button
Rear Reflecting Surround System
Headphone Jack
SURROUND button /
Virtual Headphone button
RRSS MIC Input Jack
Disc Tray
Open/Close button
Direct Play button
Volume control
Disc Change button
Tuning Down & Skip ( ) buttons
Tuning Up & Skip ( ) buttons
Play/Pause ( ) button
Stop ( ) button
AM Antenna
Connector
FM Antenna
Connector
External Video Component
Input Connectors
External Audio Component
Input Connector
5.1 Channel Speaker
Output Terminals
COMPONENT VIDEO
OUTPUT/INPUT jacks
Connect a TV with component
video inputs to these jacks.
S-Video Output Connector
If the TV is equipped with an S-Video input
connector (S-VIDEO IN), connect it to the
player's S-Video output jack.
Video Output Connector
Connect the TV's video input jacks
(VIDEO IN) to the VIDEO OUT connector.
External Digital Component Input
Connector
Use this to connect external equipment
capable of digital output.
RADIO FREQUENCY
indicator
System Status Display
SPEAKER indicator
DTS Disc indicator
LINEAR PCM indicator
PBC indicator
PREPARATION
Audio Cable / Video Cable
(AH39-40001U) / (AH39-40001V)
FM Antenna
(AH42-00004A)
Remote Control
(AH59-01225H)
RRSS Microphone
(AH59-01183D)
User's Manual
(AH68-01328R)
AM Antenna
(AH42-20001P)
Speaker Bracket
Accessories
Live Surround Mode button
10
To open the remote control cover, push the
top of the cover, then slide downward.
12
Insert Remote Batteries
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
Range of Operation of the Remote Control
Remove the battery
cover on the back of
the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
1
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
2
Replace the battery
cover.
3
Follow these precautions to avoid leaking or cracking cells:
•
Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
•
Use the correct type of batteries.Batteries that look similar may differ in voltage.
•
Always replace both batteries at the same time.
•
Do not expose batteries to heat or flame.
11
Description
Caution
PREPARATION
TV DVD RECEIVER
OPEN/CLOSE
DISC SKIP TUNER AUX
EZ VIEW
SLOW
TUNING/CH
PL II MODE PL II EFFECT
RETURN
MENU
INFO
MUTE
SURR.
PLUS
V-H/P
SUPER 5.1
ENTER
SOUND EDIT
TEST TONE
SLEEP
LOGO REPEAT
CANCEL ZOOM
P.SCAN
REMAIN
TUNER
MEMORY
VOLUME
DVD
RRSSLSM +
LSM –
BAND
MO/ST
TV/VIDEO MODE
DIMMER
PL II MODE button
TUNING/CH button
MENU button
DVD POWER button
OPEN/CLOSE button
SURR. PLUS button /
Virtual Headphone button
Live Surround Mode –, + button
RETURN button
Number(0~9) buttons
SLEEP button
EZ VIEW button
LOGO button
TV indicator
DVD RECEIVER indicator
TV/VIDEO, DIMMER button
MODE button
Direction/Enter button
REPEAT button
REMAIN button
CANCEL button
ZOOM button
TUNER MEMORY, P.SCAN button
SOUND EDIT button
TEST TONE button
MUTE button
INFO button
VOLUME button
SUPER 5.1 button
RRSS button
SLOW, MO/ST button
PL II EFFECT button
—Remote Control—
DISC SKIP button
Play/Pause button
Tuning Preset/CD Skip button
Stop button
AUX button
TUNER BAND button
Front/Rear Speaker (L)
Blue
Gray
Red
Green White
Purple
Center Speaker
Subwoofer
Front/Rear Speaker (R)
Back of the Main Unit
Black
Press down the terminal
tab on the back of the
speaker.
1
Insert the black wire into the
back terminal (–) and the gray
wire into the gray (+) terminal,
and then release the tab.
2
Connect the wires to the output jacks of
the same color on the back of the main
unit, making sure that the polarity (+/–)
is correct.
Example: Connect the center speaker's green
wire to the center speaker output jack
(green) on the back of the main unit.
3
Gray
14
Back of the Speaker Back of the Main Unit
Subwoofer
•
The position of the subwoofer is not so critical.
Place it anywhere you like.
•
Usually, it is placed by a corner near the front speakers.
Front/Rear Speakers /
•
Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
•
Place the speakers so that their tweeters will be at
the same height as your ear.
•
Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
Center Speaker
•
It is best to install it at the same height as the front
speakers.
•
You can also install it directly over or under the TV.
Position of the DVD Player
•
Place it on a stand or cabinet shelf, or under
the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
13
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
•
Connect the front/rear, center, and subwoofer speakers to the speaker terminals on the back of the main unit.
CONNECTIONS
R
LS
RS
L
C
SW
•
Do not let children play with the speakers.
They could get hurt if a speaker falls.
•
When connecting the speaker wires to the speakers,
make sure that the polarity (+/) is correct.
•
Never touch the speaker terminal while the power is on.
Doing so may result in a risk of electric shock.
Caution
•
If you place a speaker near your TV set,
screen color may be distorted because of
the magnetic field generated by the
speaker. In this case, place the speaker
away from your TV set.
Note
Connecting the Video to TV
Composite Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system
to the VIDEO IN jack on your television.
S-Video (Better Quality)
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
Component Video (Best Quality)
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
Composite
Video
Component
Video
S-Video
TV
•
When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed
any signals. See page 17 to select Progressive Scan.
*
Depending on your TV, Component Video input connectors may be marked as DVD Video input connectors.
Note
CONNECTIONS
Mounting the Speakers to a Wall
1
Attach the wall bracket holders (A) to the wall and fasten the holder
screws (B) as shown in the illustration.
•
For an optimal sound field, the distance between the speakers should be 40 inches, and each
speaker should be at least 20 inches away from the side wall.
2
Check the left and right speakers, fasten the speaker to the bracket (C)
using the fixing screw (D), and then insert the bracket into the holder as
shown in the illustration. (Insert the speaker cords before inserting the
bracket into the holder.)
3
Complete the speaker setup as shown in the illustration.
1615
B
A
T V
T V
D
C
Left Speaker
Right Speaker
•
If the wall is concrete, purchase and use anchor bolts.
1817
CONNECTIONS
P.SCAN(Progressive Scan) Function
Unlike a regular Interlace Scan in which two fields of picture information are alternated to
create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one
field of information (all lines displayed in one pass) to create a clear and detailed picture
without visible scan lines.
Hold the P.SCAN button down for longer than 1 second.
•
The selection switches back and forth between "P.SCAN" and "I.SCAN" each time the button is held
down for a minimum of 1 second.
•
The previous mode is indicated in the display first, followed by the selected mode in about a second.
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are
displayed every 1/60th of a second each.
The interlaced scanning method is intended for capturing
a still object.
Interlaced Scan (1 FRAME = 2 FIELDS)
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
As opposed to the interlaced scanning process by which a
video image is drawn in a series of passes, you get an
entire image drawn at one time.
The progressive scanning method is desirable for dealing
with moving objects. A camera that has the ability to
capture moving objects is called a "full frame shutter
camera".
Progressive Scan (FULL FRAME)
What is Progressive (or Non-Interlaced) Scanning?
•
This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support Progressive
Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive scan TVs.)
•
Depending on the brand and model of your TV, this function may not work.
•
This unit only outputs 480i and 480p in progressive scan mode.
Note
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.
Please observe the following cautions for your safety.
•
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
•
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
Cooling Fan
Connecting the Antennas
Connect the FM antenna supplied to the
FM 75Ω COAXIAL terminal as a
temporary measure.
Slowly move the antenna wire around
until you find a location where reception
is good, then fasten it to a wall or other
rigid surface.
• If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard type connector),
disconnect the supplied FM antenna.
FM antenna connection
123
1
2
Connect the AM loop antenna supplied
to the AM and terminals.
If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
AM(MW) antenna connection
1
2
FM Antenna (supplied)
Snap the tabs on the loop
into the slots of the base to
assemble the AM loop
antenna.
AM Loop Antenna
(supplied)
If AM reception is poor, connect an outdoor AM
antenna(not supplied).
2019
CONNECTIONS
Press AUX on the remote control to select ‘DIGITAL IN’.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
Connecting External Components
Connect Video Out on the DVD player to Video In on the TV.
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external
digital component.
2
3
Example: Digital signal components such as a DVD or CD Recorder.
Connecting an External Digital Component
Optical Cable
(not included)
Press AUX on the remote control to select AUX 1
or AUX 2.
•
Each time the button is pressed, the selection changes as
follows: DIGITAL IN AUX 1 AUX 2.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝
AUX1 ➝ AUX2 ➝ FM ➝ AM.
•
If you have connected an external digital
component and Video In (1, 2) at the
same time, there will be video from AUX 1
even when you select DIGITAL IN.
•
If you have connected Audio In (L, R) to
1, connect Video In to 1 as well, and if
you have connected Audio In (L, R) to 2,
connect Video In to 2 also.
Connect Audio In on the DVD player to Audio Out
on the external analog component.
•
Be sure to match connector colors.
Connect Video Out on the DVD player to Video
In on the TV.
1
Connect Video In on the DVD player to Video
Out on the external analog component.
2
3
4
Example: Analog signal components such as a VCR, Camcorder, and TV.
Connecting an External Analog Component
Video Cable
Audio Cable
If the external
analog component
has only one Audio
Out, connect either
left or right.
Note
VIDEO IN
DIGITAL OUTVIDEO OUT
L
R
VIDEO IN
VIDEO OUT
22
•
Each time the Mode button is pressed, the TV indicator (red) and the DVD RECEIVER indicator (green) will flash alternately.
•
You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
•
Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
•
By default, the remote control is set to work with Samsung TVs.
See page 67 for more information on the operation of the remote control.
Press MODE button.
To Operate the TV and DVD Player with a Single Remote Control
23
Press the MODE button so
that the TV indicator on the
remote control flashes.
TV
DVD RECEIVER
TV
DVD RECEIVER
Press the POWER button to
turn on the TV.
56
Press the MODE button so
that the DVD RECEIVER
indicator on the remote
control flashes.
Press FUNCTION button on
the main unit to select
DVD/CD mode.
Before Using Your DVD Player
Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc
you are using, these instructions may vary slightly. Read the instructions carefully before using.
21
1
Plug the power cord into the
AC power supply.
4
Press TV/VIDEO button to
select VIDEO mode.
CONNECTIONS
•
This device is designed to work with the NTSC video format.
•
For normal playback, the video format a DVD disc is recorded in
must coincide with your TV's video format.
TV Broadcast System
Loading...