Samsung HTDB650TH-XAX User Manual

DIGITAL HOME THEATER SYSTEM
HT-DB650
TV DVD RECEIVER
OPEN/CLOSE
DVD TUNER AUX
NTSC/PAL
SLOW DISC SKIP
ASC
TUNING/CH
PL II
RETURN
M
E
N
U
IN F
O
M U
T E
MODE
ENTER
SOUND EDIT
TEST TONE
SLEEP
LOGO REPEAT
CANCEL ZOOM
P.SCAN
REMAIN
TUNER MEMORY
PL II EFFECT
VOLUME
LSM
V-H/P
MOVIEMUSIC
SUPER5.1
BAND
MO/ST
TV/VIDEO MODE DIMMER
V I D E O
COMPACT
DIGITAL AUDIO
COMPACT
DIGITAL VIDEO
Instruction Manual
AH68-01328L
12

Safety Warnings

CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1 LASER product.
Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit.
This symbol alerts you to important operating and maintenance instructions accompanying the unit.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION

Precautions

Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.
Protect the player from moisture(i.e. vases) , and excess heat(e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only. Condensation may occur if your player or disc have been stored in cold
temperatures. If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
During thunderstorms, disconnect AC main plug from the wall outlet. Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat sources.
This could lead to overheating and malfunction of the unit.
The battery used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash.
PREPARATION
Phones
4

Features

3
PREPARATION

Contents

PREPARATION
Safety Warnings..................................................................................................................................................................1
Precautions.........................................................................................................................................................................2
Features..............................................................................................................................................................................3
Notes on Discs....................................................................................................................................................................5
Description..........................................................................................................................................................................7
CONNECTIONS
Connecting the Speakers....................................................................................................................................................11
Connecting the Video to TV................................................................................................................................................13
P.SCAN(Progressive Scan) Function.................................................................................................................................14
Connecting External Components......................................................................................................................................15
Connecting the Antennas....................................................................................................................................................17
Before Using Your DVD Player...........................................................................................................................................19
OPERATION
Disc Playback .....................................................................................................................................................................21
Selecting a Disc in the Disc changer ..................................................................................................................................22
Displaying Disc Information ................................................................................................................................................23
Checking the Remaining Time............................................................................................................................................24
Fast/Slow Playback.............................................................................................................................................................25
Skipping Scenes/Songs......................................................................................................................................................26
Repeat Playback.................................................................................................................................................................27
A-B Repeat Playback..........................................................................................................................................................28
Angle Function....................................................................................................................................................................29
Zoom Function....................................................................................................................................................................30
Selecting Audio/Subtitle Language.....................................................................................................................................31
Moving Directly to a Scene/Song........................................................................................................................................32
Using Disc Menu.................................................................................................................................................................33
Using the Title Menu...........................................................................................................................................................34
SETUP
Setting the Language..........................................................................................................................................................35
Setting TV Screen type.......................................................................................................................................................37
Setting Parental Controls (Rating Level).............................................................................................................................39
Setting the Password..........................................................................................................................................................41
Setting the Wallpaper..........................................................................................................................................................43
Setting the Speaker Mode ..................................................................................................................................................45
Setting the Test Tone..........................................................................................................................................................46
Setting the Delay Time........................................................................................................................................................47
Setting the Audio Quality........................................................................................................................................................................49
Setting the DRC (Dynamic Range Compression)...............................................................................................................51
Auto Sound Calibration Setup.............................................................................................................................................53
Live Surround Mode............................................................................................................................................................55
Dolby Pro Logic II Mode......................................................................................................................................................57
Dolby Pro Logic II Effect .....................................................................................................................................................58
RADIO OPERATION
Listening to Radio...............................................................................................................................................................59
Presetting Stations..............................................................................................................................................................60
MISCELLANEOUS
Convenient Functions.........................................................................................................................................................61
Operating the TV with the Remote Control.........................................................................................................................63
Before Calling for Service...................................................................................................................................................65
Cautions on Handling and Storing Discs ............................................................................................................................67
Specifications......................................................................................................................................................................68
Notes on Terminology.........................................................................................................................................................69
Memo..................................................................................................................................................................................70
Multi-Disc Playback & AM/FM Tuner
The HT-DB650 combines the convenience of multi-disc playback capability, including DVD, VCD, CD, MP3-CD, CD-R, CD-RW, and DVD-RW, with a sophisticated AM/FM tuner, all in a single player.
Super Digital Sound Master
Equipped with a new digital audio technology (auto sound calibration, magic sound field, and magic headphone) developed in cooperation with DiMagic Co., Ltd. in Japan, you can enjoy a more lively and high-sensitive sound.
Built-in 5.1-Channel Amplifier
The HT-DB650 comes with a built-in 5.1-channel amplifier, allowing you to enjoy dynamic sound.
Sound Logo
When power is turned on, a sound logo is output from speakers to notify the user that the unit is optimized for disc playback.
Power Saving Function
The HT-DB650 automatically shuts itself off after 20 minutes in the stop or pause mode.
TV Screen Saver Function
The HT-DB650 automatically brightens and darkens the brightness of the TV screen after 2 minutes in the stop or pause mode. The HT-DB650 automatically switches itself into the power saving mode after 20 minutes in the screen saver mode.
Customized TV Screen Display
The HT-DB650 allows you to select your favorite image during JPEG, DVD, or VCD playback and set it as your background wallpaper.
Auto Sound Calibration
By setting the auto sound calibration function just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5.1-channel sound field optimized for the listener's environment.
CD-R Discs
Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs may not be playable.
Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.
If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
Only the CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not be able to fully play the disc.
CD-R JPEG Discs
Only files with the ".jpeg" and ".JPEG" extensions can be played.
If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
Only a consecutively written multi session disc can be played. If there is a blank segment in the multi session disc, the disc can be played only up to the blank segment.
A maximum of 9,999 images can be stored on a single CD.
When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
Disc Recording Format
6
CD-R MP3 Discs
Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
If the name of a file is in Korean, the name will be displayed on the TV screen in Korean and * will be shown in the display of the main unit.
Use discs recorded with a compression/decompression data rate greater than 128Kbps.
Only files with the ".mp3" and ".MP3" extensions can be played.
Only a consecutively written Multi session disc can be played. If there is a blank segment in the Multi session disc, the disc can be played only up to the blank segment.
If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.
What is MP3?
MP3 is short for MPEG-1 Audio Layer 3 and MPEG is an acronym for Moving Pictures Experts Group. MP3 is a file format with compression ratio of 1:12 (128 Kbps*) That is, you can use MP3 format to record about 12 times the usual amount of data on a regular CD.
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
surround sound and MPEG-2 video compression technology. Now you can enjoy these realistic effects in the home, as if you were in a movie theater or concert hall.
V I D E O
DVD players and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
1 6
~
LD, CD-G, CD-I, CD-ROM and DVD-ROM cannot be played on this player. If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
DVD discs purchased abroad may not play on this player. If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
5

Notes on Discs

Do not use the following types of disc!
Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Copy Protection
PREPARATION
DIGITAL SOUND
NTSC
STEREO
Dolby Digital
disc
DTS disc Digital Audio
disc
Stereo disc
NTSC video format
NTSC is used in all of North
America, the Philippines, South Korea and Japan.
MP3 disc
Mark (Logo)
Audio + Video
DVD
VIDEO-CD
AUDIO-CD
12cm
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
74 min. 20 min. 74 min. 20 min.
8cm
12cm
8cm
12cm
8cm
Audio + Video
Audio
Recorded Signals
Disc Type Disc Size Max. Playing Time
Playable Discs
V I D E O
DIGITAL VIDEO
DIGITAL AUDIO
COMPACT
COMPACT
8
—Front Panel—
TITLE
PRGM CHAP TUNED
REPEAT 1 ALL DISC
5.1 CH
TITLE PBC
CHAP
PRGM
RDS
RT
TA
EX
CMX
L C R
SW
LS S RS
ST
kHz
MHz
LINEAR PCM
PBC
SURROUND
A B DSP
DOLBY DIGITAL indicator
PRO LOGIC indicator
P.SCAN indicator
SURROUND indicator
TITLE indicator
PRGM indicator
CHAPTER indicator
DISC(1~5) indicator
5.1CH indicator
REPEAT indicator
DISC indicator
TUNER indicator
DSP indicator
7

Description

Power ( ) button
Standby indicator
Function button
Auto Sound Calibration button
Headphone Jack
Virtual Headphone button
Auto Sound Calibration Input Jack
Disc Tray
Open/Close button
Direct Play button
Volume control
Disc Change button
Tuning Down & Skip ( ) buttons
Tuning Up & Skip ( ) buttons
Play/Pause ( ) button
Stop ( ) button
RADIO FREQUENCY
indicator
System Status Display
SPEAKER indicator
DTS Disc indicator
LINEAR PCM indicator
PBC indicator
PREPARATION
Audio Cable / Video Cable
FM Antenna
Remote Control
Auto Sound Calibration Microphone
User's Manual
AM Antenna
Accessories
Live Surround Mode button
VOLTAGE SELECTOR
Rear Panel
AM Antenna Connector
FM Antenna
Connector
External Video Component Input Connectors
External Audio Component Input Connector
5.1 Channel Speaker Output Terminals
COMPONENT VIDEO
OUTPUT/INPUT jacks
Connect a TV with component
video inputs to these jacks.
S-Video Output Connector
If the TV is equipped with an S-Video input connector (S-VIDEO IN), connect it to the player's S-Video output jack.
Video Output Connector
Connect the TV's video input jacks
(VIDEO IN) to the VIDEO OUT connector.
External Digital Component Input
Connector
Use this to connect external equipment
capable of digital output.
Voltage Selector(option)
To open the remote control cover, push the top of the cover, then slide downward.
10
Insert Remote Batteries
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.
Range of Operation of the Remote Control
Remove the battery cover on the back of the remote by pressing down and sliding the cover in the direction of the arrow.
1
Insert two 1.5V AAA batteries, paying attention to the correct polarities (+ and –).
2
Replace the battery cover.
3
Follow these precautions to avoid leaking or cracking cells:
Place batteries in the remote control so they match the polarity:(+) to (+)and ()to (–).
Use the correct type of batteries.Batteries that look similar may differ in voltage.
Always replace both batteries at the same time.
Do not expose batteries to heat or flame.
9
Description
Caution
PREPARATION
TV DVD RECEIVER
OPEN/CLOSE
DVD TUNER AUX
EZ VIEW
NTSC/PAL
SLOW DISC SKIP
ASC
TUNING/CH
PL II
R
E
T
U
R
N
MENU
INFO
MUTE
MODE
ENTER
SOUND EDIT
TEST TONE
SLEEP
LOGO REPEAT
CANCEL ZOOM
P.SCAN
REMAIN
TUNER
MEMORY
PL II
EFFECT
VOLUME
LSM
V-H/P
MOVIEMUSIC
SUPER5.1
BAND
MO/ST
TV/VIDEO MODE
DIMMER
PL II MODE button
TUNING/CH button
MENU button
DVD POWER button
OPEN/CLOSE button
SUPER 5.1 button
Live Surround Mode button/
Virtual Headphone button
Auto Sound Calibration button
RETURN button
Number(0~9) buttons
SLEEP button
EZ VIEW, NTSC/PAL button
LOGO button
TV indicator DVD RECEIVER indicator
TV/VIDEO, DIMMER button
MODE button
Direction/Enter button
REPEAT button
REMAIN button
CANCEL button
ZOOM button
TUNER MEMORY, P.SCAN button
SOUND EDIT button
TEST TONE button
MUTE button
INFO button
VOLUME button
MOVIE button
SLOW, MO/ST button
DISC SKIP button
PL II EFFECT button
Remote Control
DVD button
Play/Pause button
Tuning Preset/CD Skip button
Stop button
AUX button
TUNER BAND button
RSLS
C
L
SW
R
Make sure the colors of the speaker terminals match the colors of the connecting jacks.
Make sure the polarities (+ and -) are correct.
Insert the black wire into the black (–) terminal and the gray wire into the gray (+) terminal.
Make sure the polarities (+ and –) are correct.
Black
Press down the terminal tab on the back of the speaker.
1
Insert the wire into the terminal and release the terminal tab.
2
Connect the connecting jacks (6) to the back of the DVD player.
3
Gray
12
Back of the Speakers Back of the Main Unit
Rear Speakers
Place these speakers behind your listening position.
If there isn't enough room, place these speakers so they face each other.
Place them about 60 to 90cm (2 to 3feet) above your ear, facing slightly downward.
*
Unlike the front and center speakers, the rear speakers are used to mainly handle sound effects and sound will not come from them all the time.
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
Usually, it is placed by a corner near the front speakers.
Front Speakers
Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at the same height as your ear.
Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers.
Center Speaker
It is best to install it at the same height as the front speakers.
You can also install it directly over or under the TV.
Position of the DVD Player
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
11

Connecting the Speakers

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
CONNECTIONS
R
L
C
RS
LS
SW
Rear Speaker (L)
Rear Speaker (R)
Subwoofer
Center Speaker
Front Speaker (L)
Front Speaker (R)
Blue
Gray
Purple
White
Red
Green
VOLTAGE SELECTOR
14

Connecting the Video to TV

13
Composite Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO IN jack on your television.
S-Video (Better Quality)
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied) from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on your television.
Component Video (Best Quality)
If your television is equipped with Component Video inputs, connect a component video cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding jacks on your television.
Composite
Video
Component
Video
S-Video
TV
VOLTAGE SELECTOR
When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed any signals. See page 16 to select Progressive Scan.
*
Depending on your TV, Component Video input connectors may be marked as DVD Video input connectors.
Note
CONNECTIONS

P.SCAN(Progressive Scan) Function

Unlike a regular Interlace Scan in which two fields of picture information are alternated to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.
While the player is in the Stop mode, hold the P.SCAN button down for longer than 1 second.
The selection switches back and forth between "P.SCAN" and "I.SCAN" each time the button is held down for a minimum of 1 second.
The previous mode is indicated in the display first, followed by the selected mode in about a second.
In interlaced-scan video, a frame consists of two interlaced fields (odd and even), where each field contains every other horizontal line in the frame. The odd field of alternating lines is displayed first, and then the even field is displayed to fill in the alternating gaps left by the odd field to form a single frame. One frame, displayed every 1/30th of a second, contains two interfaced fields, thus a total of 60 fields are displayed every 1/60th of a second each. The interlaced scanning method is intended for capturing a still object.
Interlaced Scan (1 FRAME = 2 FIELDS)
The progressive scanning method scans one full frame of video consecutively down the screen, line by line. As opposed to the interlaced scanning process by which a video image is drawn in a series of passes, you get an entire image drawn at one time. The progressive scanning method is desirable for dealing with moving objects. A camera that has the ability to capture moving objects is called a "full frame shutter camera".
Progressive Scan (FULL FRAME)
What is Progressive (or Non-Interlaced) Scanning?
This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive scan TVs.)
Depending on the brand and model of your TV, this function may not work.
Note
Press AUX on the remote control to select AUX 1 or AUX 2.
Each time the button is pressed, the selection changes as follows: DIGITAL IN AUX 1 AUX 2.
You can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD DIGITAL IN AUX1 AUX2 FM AM.
If you have connected an external digital component and Video In (1, 2) at the same time, there will be video from AUX 1 even when you select DIGITAL IN.
If you have connected Audio In (L, R) to 1, connect Video In to 1 as well, and if you have connected Audio In (L, R) to 2, connect Video In to 2 also.
Connect Audio In on the DVD player to Audio Out on the external analog component.
Be sure to match connector colors.
Connect Video Out on the DVD player to Video In on the TV.
1
Connect Video In on the DVD player to Video Out on the external analog component.
2 3
4
16
Example: Analog signal components such as a VCR, Camcorder, and TV.
Connecting an External Analog Component
Press AUX on the remote control to select DIGITAL IN’.
Each time the button is pressed, the selection changes as follows: DIGITAL IN AUX 1 AUX 2.
You can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD DIGITAL IN AUX1 AUX2 FM AM.

Connecting External Components

Connect Video Out on the DVD player to Video In on the TV.
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
2 3
15
Example: Digital signal components such as a DVD or CD Recorder.
Connecting an External Digital Component
Note
CONNECTIONS
Optical Cable
(not included)
Video Cable
Audio Cable
If the external analog component has only one Audio Out, connect either
left or right.
The AC Cord must be plugged into an appropriate socket.
Before plugging your system into an AC outlet, you must check the voltage. Check the position of the voltage selector on the rear of the system (OPTIONAL).
1. Plug the AC Cord on the rear of the system into an appropriate outlet.
2. Press the On/Standby button to switch your DVD Player system on.
VIDEO IN
DIGITAL OUTVIDEO OUT
VOLTAGE SELECTOR
R
L
VOLTAGE SELECTOR
VIDEO OUT
VIDEO IN
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated normally. The cooling fan is activated automatically to supply cool air to the unit.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)
Cooling Fan
18

Connecting the Antennas

17
Connect the FM antenna supplied to the FM 75COAXIAL terminal as a temporary measure.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
If reception is poor, connect an outdoor antenna. Before attaching a 75coaxial cable (with a standard type connector), disconnect the supplied FM antenna.
CONNECTIONS
FM antenna connection
VOLTAGE SELECTOR
1 2
Connect the AM loop antenna supplied to the AM and terminals.
If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected).
AM(MW) antenna connection
123
VOLTAGE SELECTOR
1 2
FM Antenna (supplied)
Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.
AM Loop Antenna (supplied)
If AM reception is poor, connect an outdoor AM antenna(not supplied).
20
Each time the Mode button is pressed, the TV indicator (red) and the DVD RECEIVER indicator (green) will flash alternately.
You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
By default, the remote control is set to work with Samsung TVs. See page 63 for more information on the operation of the remote control.
Press MODE button.
To Operate the TV and DVD Player with a Single Remote Control
23
Press the MODE button so that the TV indicator on the remote control flashes.
TV
DVD RECEIVER
TV
DVD RECEIVER
Press the POWER button to turn on the TV.
56
Press the MODE button so that the DVD RECEIVER indicator on the remote control flashes.
Press DVD button to select DVD/CD mode.

Before Using Your DVD Player

Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using.
19
By default, the video format is set to "NTSC".
Each time the button is pressed, the video format switches between "NTSC" and "PAL".
Each country has a different video format standard.
For normal playback, the video format of the disc must be the same as the video format of your TV.
Turn off the main unit and then press NTSC/PAL.
Selecting the Video Format
1
Plug the power cord into the AC power supply.
4
Press TV/VIDEO button to select VIDEO mode.
CONNECTIONS
TV
DVD RECEIVER
Loading...
+ 25 hidden pages