Samsung HT-D6530 User Manual

HT-D6530

5.1CH Blu-ray™

Home Entertainment System

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

HT-D6530_XAC_0302.indd 1HT-D6530_XAC_0302.indd 1 2011-03-02 ¿ÀÈÄ 2:27:172011-03-02 ¿ÀÈÄ 2:27:17

Safety Information

Safety Warnings

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lighting ﬂ ash and Arrowhead within Triangle Is awarning sign alerting you of dangerous voltage Inside the product.

CAUTION :

SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

TO REDUCE THE RISK OF ELECTRIC

The explanation point within the triangle is a warning sign alerting you of important instructions accompanying the product.

WARNING

To reduce the risk of ﬁ re or electric shock, do not

•

expose this appliance to rain or moisture.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

CAUTION

Apparatus shall not be exposed to dripping or splashing and

•

no objects ﬁ lled with liquids, such as vases, shall be placed on the apparatus.

DANGER

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)

CAUTION

CLASS 1 LASER PRODUCT

This product is classiﬁ ed as a CLASS 1 LASER

•

product. Use of controls, adjustments or performance of procedures other than those speciﬁ ed herein may result in hazardous radiation exposure.

CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION

•

WHEN OPEN. AVOID EXPOSURE TO THE BEAM (IEC 60825-1)

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS

•

OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

Note to CATV system installer

This reminder is provided to call the CATV system installer’s attention to Section 820~40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

2 English

HT-D6530_XAC_0302.indd 2HT-D6530_XAC_0302.indd 2 2011-03-02 ¿ÀÈÄ 2:27:412011-03-02 ¿ÀÈÄ 2:27:41

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

1) Read these instructions.

2) Keep these Instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁ ers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not ﬁ t into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachment/accessories speciﬁ ed by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table speciﬁ ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualiﬁ ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

English 3

HT-D6530_XAC_0302.indd 3HT-D6530_XAC_0302.indd 3 2011-03-02 ¿ÀÈÄ 2:27:412011-03-02 ¿ÀÈÄ 2:27:41

Safety Information

Precautions

Ensure that the AC power supply in your house complies with the identiﬁ cation sticker located on the back of

•

your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation

•

(7.5~10cm). Do not place the product on ampliﬁ ers or other equipment which may become hot.

•

Make sure the ventilation slots are not covered. Do not stack anything on top of the product.

•

Before moving the product, ensure the Disc Insert Hole is empty.

•

To disconnect the product completely from the power supply, remove the mains plug from the wall outlet.

•

- If you leave the product unused for a long period of time, disconnect the plug from the wall outlet. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage

•

the product. Do not expose the product to direct sunlight or other heat sources. This could lead to overheating and

•

malfunction of the product. Protect the product from moisture, excess heat, and equipment creating strong magnetic or electric ﬁ elds (i.e.

•

speakers.). Disconnect the power cable from the AC supply if the product malfunctions.

•

Your product is not intended for industrial use. Use of this product is for personal use only.

•

Condensation may occur if you store your product or a disc in cold temperatures. If transporting the product

•

during the winter, wait approximately 2 hours until the product has reached room temperature before using. The batteries used with this product contain chemicals that are harmful to the environment.

•

Do not dispose of batteries in the general household trash.

Viewing TV using the 3D function

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the TV’s 3D function.

WARNING

Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea and headaches. If you

•

experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest. Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D

•

TV, remove your 3D Active Glasses, and rest. A responsible adult should frequently check on children who are using the 3D function. If there are any reports of

•

tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest. Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective

•

goggles, etc.) Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D

•

Active Glasses while moving around may result in injuries caused by running into objects, tripping, and/or falling.

4 English

HT-D6530_XAC_0302.indd 4HT-D6530_XAC_0302.indd 4 2011-03-02 ¿ÀÈÄ 2:27:412011-03-02 ¿ÀÈÄ 2:27:41

Cautions on Handling and Storing Discs

Small scratches on the disc may reduce sound and picture quality or cause skipping.

Be especially careful not to scratch discs when handling them.

Holding discs

Do not touch the playback side of the disc.

•

Hold the disc by the edges so that

•

ﬁ ngerprints will not get on the surface. Do not stick paper or tape on the disc.

•

Disc Storage

Do not keep in direct sunlight

•

Keep in a cool ventilated area

•

Keep in a clean Protection jacket.

•

Store vertically.

NOTE

✎

Do not allow the discs to become contaminated with



dirt. Do not load cracked or scratched discs.



Handling and Storing Discs

If you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

When cleaning, wipe gently from the inside to

•

the outside of the disc

NOTE

✎

Condensation may form if warm air comes into



contact with cold parts inside the product. When condensation forms inside the product, it may not operate correctly. If this occurs, remove the disc and let the product stand for 1 or 2 hours with the power on.

Dolby and the double-D symbol are registered trademarks of Dolby

•

Laboratories. "ABOUT DIVX VIDEO: DivX® is a digital video format

•

created by DivX, Inc. This is an ofﬁ cial DivX Certiﬁ ed® device that plays DivX video. Visit www.divx.com for more information and software tools to convert your ﬁ les into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certiﬁ ed® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

DivX Certiﬁ ed® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certiﬁ ed® and associated logos are trademarks of DivX, Inc. and are used under license."

•

HDMI, the HDMI Logo, and High-Deﬁ nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

•

Oracle and Java are registered trademarks of Oracle and/or its afﬁ liates. Other names may be trademarks of their respective owners.

•

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

•

Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association.

•

iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc.

< Open Source License Notice >

•

In the case of using open source software, Open Source Licenses are available on the product menu.

License

English 5

HT-D6530_XAC_0302.indd 5HT-D6530_XAC_0302.indd 5 2011-03-02 ¿ÀÈÄ 2:27:412011-03-02 ¿ÀÈÄ 2:27:41

Contents

SAFETY INFORMATION

GETTING STARTED

CONNECTIONS

SETUP

2 Safety Warnings 3 Important Safety Instructions 4 Precautions 5 Cautions on Handling and Storing Discs 5 License 5 Copyright

8 Key features of your new Blu-ray Home Theater 9 Icons that will be used in manual 10 Disc Types and Characteristics 14 Accessories 15 Description 15 Front Panel 16 Rear Panel 17 Remote Control

19 Connecting the Speakers 22 Connecting the Optional Wireless Receiver Module 24 Connecting External Devices/your TV via HDMI 25 Connecting the FM Antenna 27

Connecting Audio from External Components

28 Connecting to the Network

30 Initial Settings 31 Accessing the Settings Menu 32 Display 32 3D Settings 33 TV Aspect 33 Smart Hub Screen Size 33 BD Wise (Samsung Products only) 33 Resolution 35 HDMI Color Format 35 Movie Frame (24 Fs) 35 HDMI Deep Color 35 Still Mode 35 Progressive Mode 36 Audio 36 Speaker Settings 37 Musical Room Calibration 37 User EQ 38 HDMI Audio 38 Audio Return Channel 38 Digital Output 39 Dynamic Range Control 40 Audio Sync 40 Network 40 Network Settings 43 Network Status 43 BD-LIVE Internet Connection 44 System 44 Initial Settings 44 Anynet+ (HDMI-CEC) 44 BD Data Management 44 Time Zone 44 DivX® Video On Demand 44 Reset 45 Language

6 English

HT-D6530_XAC_0302.indd 6HT-D6530_XAC_0302.indd 6 2011-03-02 ¿ÀÈÄ 2:27:412011-03-02 ¿ÀÈÄ 2:27:41

SETUP

45 Security 45 BD Parental Rating 45 DVD Parental Rating 45 Change Password 45 General 45 Front Display 45 Light Effect 46 Network Remote Control 46 Support 46 Software Upgrade 48 Contact Samsung

BASIC FUNCTIONS

NETWORK SERVICES

49 Playing a Disc 49 Using the Disc menu / Title menu / Popup menu 50 Using the Search and Skip Functions 51 Slow Motion Play/Step Motion Play 51 Repeat Playback 52 Using the TOOLS button 54 Listening to Music 56 Sound Mode 57 Playing back a Picture 58 Playing back a USB Storage Device 59 Listening to Radio 59 Connecting iPod/iPhone Using the USB Cable 59 Connecting iPod/iPhone Using the Dock 60 Use iPod/iPhone with a Wireless Dock Cradle (sold

separately) for iPod/iPhone 61 iPod/iPhone Models You Can Use with This Product 62 How to Link the Wireless Transmitter with the Main Unit

63 Using Smart Hub 70 Samsung Apps 72 BD-LIVE™ 72 Using the AllShare Function

OTHER INFORMATION

73 Troubleshooting 76 Index 77 Speciﬁ cations

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product

• appearance.

An administration fee may be charged if either

•

an engineer is called out at your request and there is no defect in the product

(i.e. where you have failed to read this user manual) you bring the unit to a repair center and there is no defect in the product

(i.e. where you have failed to read this user manual).

The amount of such administration charge will be advised to you before any work or home visit is carried out.

•

ENGLISH

English 7

HT-D6530_XAC_0302.indd 7HT-D6530_XAC_0302.indd 7 2011-03-02 ¿ÀÈÄ 2:27:412011-03-02 ¿ÀÈÄ 2:27:41

Getting Started

Key features of your new Blu-ray Home Theater

Product Features

This product can play 3D contents through an HDMI cable. To implement the 3D effect, connect a 3D device (3D-compliant AV receiver, 3D-compliant TV) to the product using an HDMI cable, and play the 3D content while wearing 3D vision glasses.

Wireless receiver module

Samsung ’s rear-channel wireless receiver module does away with cables running between the product and rear-channel speakers. Instead, the rear speakers connect to a compact wireless receiver module that communicates with the product.

Smart Hub

You can download various chargeable or free-of charge applications through network connection. Various internet service and contents will be provided, which include news, weather forecast, stock market, games, movies and music.

AllShare

You can play videos, music and photos saved on your devices (such as your PC, mobile phones or NAS) through a network connection.

Audio Sync function

Video may lag behind the audio if the product is connected to a digital TV. To compensate for this, you can adjust the audio delay time to sync up with the video.

iPod Sync function

If the video signal in iPod player lags behind the audio signal during playback, set the audio delay time as required to match both.

iPod & iPhone support

If the system is connected to iPod player using the iPod/iPhone specific USB cable, you can play the music files in iPod/iPhone through the connected speakers. You can play video files as well as music using the iPod-specific dock, and also enjoy iPod music using the wireless transmitter (sold separately).

BD Wise

BD Wise automatically adjusts BD Wise-compliant Samsung products to the optimal settings between them. This feature is enabled only if BD Wise-compliant Samsung products are connected to each other using an HDMI cable.

3D Sound

You can enjoy much natural and vivid surround sound with enriched tones of sound.

ARC (Audio Return Channel)

You can enjoy TV sound from the Home Theater speakers by using just one HDMI cable.

8 English

HT-D6530_XAC_0302.indd 8HT-D6530_XAC_0302.indd 8 2011-03-02 ¿ÀÈÄ 2:27:412011-03-02 ¿ÀÈÄ 2:27:41

Icons that will be used in manual

Make sure to check the following terms before reading the user manual.

Term Logo Icon Definition

01 Getting Started

BD-ROM

BD-RE/-R

DVD-VIDEO

DVD-RW(V)

DVD-R

DVD+RW

DVD+R

Audio CD

MP3

WMA

JPEG

DivX MKV MP4

USB storage

device

CAUTION

NOTE

Shortcut Key

DivX

h z Z

o w G

This involves a function available on a BD-ROM.

This involves a function available on a BD-RE/-R disc recorded in the BD-RE format.

This involves a function available on a DVD-VIDEO.

This involves a function available on recorded DVD+RW or DVD-RW(V)/ DVD-R/+R discs that have been recorded and ﬁ nalized.

This involves a function available on an audio CD-RW/-R (CD-DA format).

This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage media containing MP3 or WMA contents.

This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage media containing JPEG contents.

This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage media containing DivX contents.

This involves a function available on a USB storage device.

This involves a situation where a function does not operate or settings may

be cancelled.

This involves tips or instructions on the page that help each function

✎

operate.

This function provides direct and easy access pressing the button on the remote control.

This product is compatible with the NTSC color system only.

•

PAL discs will not play.

•

English 9

HT-D6530_XAC_0302.indd 9HT-D6530_XAC_0302.indd 9 2011-03-02 ¿ÀÈÄ 2:27:422011-03-02 ¿ÀÈÄ 2:27:42

Getting Started

Disc Types and Characteristics

Blu-ray Disc Compatibility

Blu-ray is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Disc Types and Characteristics section of this Manual.

NOTE

✎

Playback may not work for some types of discs, or



when speciﬁ c operations, such as angle change and aspect ratio adjustment, are being performed. Information about the discs is written in detail on the box. Please refer to this if necessary. Do not allow the disc to become dirty or scratched.



Fingerprints, dirt, dust, scratches or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for playback. When a BD-Java title is played, loading may take



longer than a normal title, or some functions may perform slowly.

Discs that cannot be played

HD DVD Disc

•

DVD-RAM

•

3.9 GB DVD-R Disc for Authoring.

•

DVD-RW(VR mode)

•

Super Audio CD(except CD layer)

•

DVD-ROM/PD/MV-Disc, etc CVD/CD-ROM/

•

CDV/CD-G/CD-I/LD CDGs play audio only, not graphics.

•

Logos of Discs that can be played

Blu-ray Disc 3D Blu-ray Disc

NTSC broadcast system in

Dolby Digital Plus

Dolby TrueHD

Java

U.S.A, Canada, Korea,

Japan

DTS-HD High Resolution

Audio

DTS-HD Master Audio |

Essential

NOTE

✎

Some commercial discs and DVD discs purchased



outside your region may not be playable with this product. If a DVD-R/-RW disc has not been recorded properly



in DVD video format, it will not be playable.

BD-LIVE

10 English

HT-D6530_XAC_0302.indd 10HT-D6530_XAC_0302.indd 10 2011-03-02 ¿ÀÈÄ 2:27:432011-03-02 ¿ÀÈÄ 2:27:43

01 Getting Started

Region Code

Both the product and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play.

Disc Type

Blu-ray

DVD-VIDEO

Region

Code

North America, Central America, South America, Korea, Japan,

Taiwan, Hong Kong and South East Asia.

Europe, Greenland, French territories, Middle East, Africa,

Australia and New Zealand.

India, China, Russia, Central and

South Asia.

The U.S., U.S. territories and

Canada

Europe, Japan, the Middle East,

Egypt, South Africa, Greenland

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

Mexico, South America, Central America, Australia, New Zealand,

Paciﬁ c Islands, Caribbean

Russia, Eastern Europe, India, most of Africa, North Korea,

Mongolia

China

Area

Disc Types

BD-ROM

This Blu-ray disc can only be played back. This product can play back pre-recorded commercial BD-ROM discs.

BD-RE/-R

This Blu-ray disc can be recorded and played back. This product can play back a BD-RE/-R disc recorded by other compatible Blu-ray disc recorders.

DVD-VIDEO

This product can play back pre-recorded commercial

•

DVD discs (DVD-VIDEO discs) with movies. When switching from the ﬁ rst layer to the second

•

layer of a dual-layered DVD-VIDEO disc, there may be momentary distortion in the image and

product

sound. This is not a malfunction of the

DVD-RW/-R/+R

This

product recorded and ﬁ nalized with a DVD video recorder. Ability to play back may depend on recording conditions.

DVD+RW

•

This product can play back a DVD+RW disc recorded with a DVD Video recorder. Ability to play back may depend on recording conditions.

Audio CD (CD-DA)

•

This CD-RW/-R discs.

•

The product may not be able to play some CDRW/-R discs due to the condition of the recording.

CD-RW/-R

•

Use a 700MB(80 minutes) CD-RW/-R disc. If possible, do not use a 800MB(90 minutes) or above disc, as the disc may not play back.

If the CD-RW/-R disc was not recorded as a

•

closed session, you may experience delays when playing back the beginning of the disc or all recorded ﬁ les may not play.

•

Some CD-RW/-R discs may not be playable with this product, depending on the device which was used to burn them. For contents recorded on CDRW/-R media from CDs for your personal use, playability may vary depending on contents and discs.

can play back a DVD-RW/-R/+R disc

product

can play back CD-DA format audio

English 11

HT-D6530_XAC_0302.indd 11HT-D6530_XAC_0302.indd 11 2011-03-02 ¿ÀÈÄ 2:27:442011-03-02 ¿ÀÈÄ 2:27:44

Getting Started

Disc Format

Using JPEG disc

CD-R/-RW, DVD-RW/-R recorded with UDF or JOLIET format can be played back.

•

Only JPEG ﬁ les with the ".jpg", ".JPG", ".jpeg" or "JPEG" extension can be displayed.

•

Progressive JPEG is supported.

•

DVD-RW/-R (V)

•

This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played by this product once it has been ﬁ nalized.

•

If a disc that has been recorded in Video Mode by a different maker’s recorder but has not been ﬁ nalized, it cannot be played by this product.

Supported File Formats

Video File Support

File Extension Container Video Codec Audio Codec Resolution

1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080

1920x1080 1920x1080 1920x1080

1920x1080

*.avi

*.mkv

*.asf

*.wmv

*.mp4

*.3gp

DivX 3.11/4.x/5.1/6.0

XviD

AVI

MKV

ASF

ASF Window Media Video v9

MP4

3GPP

H.264 BP/MP/HP

MPEG4 SP/ASP

Motion JPEG

DivX 3.11/4.x/5.1/6.0

XviD

H.264 BP/MP/HP

MPEG4 SP/ASP

Motion JPEG

DivX 3.11/4.x/5.1/6.0

XviD

H.264 BP/MP/HP

MPEG4 SP/ASP

Motion JPEG

H.264 BP/MP/HP

MPEG4 SP/ASP

XVID

H.264 BP/MP/HP

MPEG4 SP/ASP

MP3 AC3

LPCM

ADPCM

DTS Core

MP3 AC3

LPCM

ADPCM

DTS Core

MP3 AC3

LPCM

ADPCM

WMA

WMA 1920x1080

MP3

ADPCM

AAC

ADPCM

AAC

HE-AAC

12 English

HT-D6530_XAC_0302.indd 12HT-D6530_XAC_0302.indd 12 2011-03-02 ¿ÀÈÄ 2:27:442011-03-02 ¿ÀÈÄ 2:27:44

File Extension Container Video Codec Audio Codec Resolution

*.vro

*.mpg

*.mpeg

*.ts *.tp

*.trp

VRO VOB

MPEG2

MPEG1

MPEG1 MPEG2

H.264

MPEG2

H.264

VC1

AC3 MPEG LPCM

AAC

AC3

AAC

MP3

DD+

HE-AAC

1920x1080

352x288

1920x1080

1920x1080 1920x1080

1920x1080

Restrictions

Some of the Codecs above listed are not supported if having a problem with the contents.

• Video source with incorrect container information or if corrupt will not be played properly.

• AV source with more than the standard bit rate or frame rate may not be played properly.

• If the index table is corrupt, the Seek (Jump) function will not be supported.

• If you play a video via the network, it may not be played properly depending on the network status.

•

Video decoder

Up to H.264 Level 4.1 supported.

• H.264 FMO/ASO/RS, VC1 SP/MP/AP L4, AVCHD not supported.

• XVID, MPEG4 SP, ASP :

•

- Below 1280 x 720: 60 frame max

- Above 1280 x 720: 30 frame max GMC 2 or higher not supported.

•

01 Getting Started

Audio decoder

Up to WMA 7,8,9 supported.

• WMA 9 PRO with more than two channels (multi-channel) not supported.

• WMA 9 Lossless, Voice not supported.

• WMA sampling rate at 22050Hz mono not supported.

•

Music File Support

File Extension Container Audio Codec Support Range

*.mp3

*.wma

MP3

WMA

MP3 -

Compliant with WMA version 10

WMA

* Sampling rates (in kHz) - 8, 11, 16, 22, 32,

44.1, 48

* Bit rates - All bit-rates in the range 5kbps to

384kbps

English 13

HT-D6530_XAC_0302.indd 13HT-D6530_XAC_0302.indd 13 2011-03-02 ¿ÀÈÄ 2:27:442011-03-02 ¿ÀÈÄ 2:27:44

Getting Started

Notes on USB connection

Supported devices:

USB storage media, MP3 player, digital camera, USB card reader

Does not support if a folder or ﬁ le name is longer than 125 characters.

A subtitle ﬁ le bigger than 300 KB may not be properly displayed.

A certain USB/digital camera device may not be compatible with the product.

FAT16 and FAT32 ﬁ le systems are supported.

Photo (JPEG), music (MP3) and video ﬁ le should have their names in Korean or English. Otherwise, the ﬁ le may not played.

Accessories

Check for the supplied accessories below.

Connect directly to the product's USB port.

6) Connecting through another cable may raise problems with USB compatibility.

Inserting more than one memory device to a

7) multi-card reader may not operate properly.

PTP protocol for digital camera is not

8) supported.

Do not disconnect USB device during a

9) "loading" process.

Bigger the image resolution, the longer the

10)

delay to displaying.

11)

DRM applied MP3 ﬁ les downloaded from a

commercial site are not played back.

Video Cable FM Antenna Soft Cloth User's Manual

FUNCTION

POWER

TV SOURCE

RECEIVER SLEEP

BD TV

123

456

7809

REPEATFULL SCREEN

MUTE

TUNING

VOL

/CH

SFE MODE

DISC MENU MENU TITLE MENU

POPUP

TOOLS

INFO

RETURN

EXIT

TUNER MEMORY

iPod SYNC

MO/ST

SMART

SEARCH 2D→3D

NETFLIX

HUB

3D SOUND

DSP

Remote Control/Batteries (AAA size)

ASC Microphone iPod Dock

Wireless Dock Cradle for iPod/iPhone : HT-WDC10 (sold separately)

L IN

STANDB

CHARGE

Wireless Transmitter Charging Cradle DC Power Cord DC Power Adapter

14 English

HT-D6530_XAC_0302.indd 14HT-D6530_XAC_0302.indd 14 2011-03-02 ¿ÀÈÄ 2:27:452011-03-02 ¿ÀÈÄ 2:27:45

Front Panel

ASC IN

5V 500mA

01 Getting Started

Description

1 32 4 5

POWER BUTTON ( )

FUNCTION BUTTON

DISPLAY

STOP BUTTON

PLAY/PAUSE BUTTON

ENTER BUTTON

EJECT BUTTON

DISC SLOT

REMOTE CONTROL SENSOR

ASC IN JACK

7128 9

Turns the product on and off. The mode switches as follows :

BD/DVD  D. IN  AUX  R. IPOD  W. IPOD  H. IN1  H. IN2  FM Displays the playing status, time, etc.

Stops disc playback.

Plays a disc or pauses playback.

Selects menu items or starts a Blu-ray disc. (It will not start a DVD disc.)

Ejects a Disc.

Insert disc here.

Detects signals from the remote control.

Used to connect the ASC Microphone for setting up MRC (Musical Room Calibration).

10 11

VOLUME CONTROL

USB PORT

NOTE

✎

You can perform software upgrades using the USB Host jack with a USB memory ﬂ ash stick only.



When the product displays the Blu-ray disc menu, you cannot start the movie by pressing the PLAY button on the



product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the ENTER button.

HT-D6530_XAC_0302.indd 15HT-D6530_XAC_0302.indd 15 2011-03-02 ¿ÀÈÄ 2:27:462011-03-02 ¿ÀÈÄ 2:27:46

Volume adjustment. You can connect a USB memory ﬂ ash stick here and use it as storage when the product is

connected to BD-LIVE. You can also use the USB Host for software upgrades and MP3/JPEG/ DivX/MKV/MP4 playback. And also it is possible to use R. IPOD when iPod is connected.

English 15

Getting Started

FM ANT

WIRELESS

VIDEO OUTAUX IN

LAN iPod HDMI OUT

DIGITAL AUDIO IN

OPTICAL

COMPONENT OUT

HDMI IN

FRONT

SPEAKERS OUT

SUBWOOFER

CENTER FRONT SURROUND

SURROUND

SPEAKER IMPEDANCE : 3

Rear Panel

1 2 3 4 6 7 8

LAN TERMINAL

iPod JACK

EXTERNAL DIGITAL AUDIO IN JACK

(OPTICAL)

HDMI OUT JACK

HDMI IN JACKS

FM ANTENNA JACK

TX CARD CONNECTION (WIRELESS)

AUX IN JACKS

COMPONENT VIDEO OUT JACKS

VIDEO OUT JACK

Can be used for network based services (see pages 63~70), BD-LIVE and software upgrade under the network connection.

Connect the iPod dock connector here.

Use this to connect external equipment capable of digital output.

Use an HDMI cable, connect this HDMI output terminal to the HDMI input terminal on your TV for the best quality picture.

Receives digital video and audio signals simultaneously using an HDMI cable.

Connect the FM antenna.

The TX card enables communication between the product and the wireless receiver module.

Connect to the 2CH analog output of an external device (such as a VCR)

Connect a TV with Component video inputs to these jacks.

Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT Jack on this product.

9 10 11 12

SPEAKER OUTPUT CONNECTORS

COOLING FAN

CAUTION

Ensure a minimum of 4 inches of clear space on all sides of the cooling fan when installing the product.



Do not obstruct the cooling fan or ventilation holes.



16 English

HT-D6530_XAC_0302.indd 16HT-D6530_XAC_0302.indd 16 2011-03-02 ¿ÀÈÄ 2:27:472011-03-02 ¿ÀÈÄ 2:27:47

Connect the front, center, surround, subwoofer speakers.

The cooling fan supplies cool air to the product to prevent overheating and always revolves when the power is on.

Tour of the Remote Control

01 Getting Started

Remote Control

Turn the product on and off.

If you want to change to TV mode,

press the TV button.

If you want to change to Home Theater,

press the BD button.

Press numeric buttons to operate options.

Press this to see the full screen on a TV.

Press to skip backwards or forwards.

Press to stop/play a disc.

Cut off the sound temporarily.

Adjust the volume.

Press this to move to the home menu.

Press to view the disc menu.

Press this to use the Tools menu.

Select on-screen menu items and

change menu value.

Return to the previous menu.

Correct the audio synchronization

when playing the iPod video content.

These buttons are used both for menus

on the product and also several

Blu-ray Disc functions.

Press this to use the Netflix.

Press to apply 3D Sound effect.

Press this to use the Smart Hub.

Select the desired Dolby Pro

Logic II audio mode.

POWER

RECEIVER SLEEP

BD TV

FUNCTION

TV SOURCE

123

456

7809

REPEATFULL SCREEN

MUTE

VOL

DISC MENU MENU TITLE MENU

TOOLS

RETURN

iPod SYNC

SMART SEARCH

NETFLIX

HUB

3D SOUND

TUNING

SFE MODE

/CH

POPUP

INFO

EXIT

TUNER

MO/ST

MEMORY

2D→3D

DSP

This is mode selection button. or Press to select TV's video mode.

Set a Sleep time to shut off the product.

To eject the disc.

Allows you to repeat a title, chapter, track or disc.

Press to search backwards or forwards.

Press to pause a disc.

Search for active FM stations and change channels.

You can set the SFE(Sound Field Effect) mode best suited for the type of music you are listening to.

Use this to enter the popup menu/title menu.

Use this to display the playback information when playing a Blu-ray/DVD disc.

Press this to exit the menu.

Used to set a preset radio frequency. Select MONO or STEREO for radio

broadcasting. Press to enjoy an ordinary 2D video

in 3D mode. This button is not available to use.

Press this to search a contents. Regulate and stabilize the volume

level. (Digital Signal Processor)

English 17

HT-D6530_XAC_0302.indd 17HT-D6530_XAC_0302.indd 17 2011-03-02 ¿ÀÈÄ 2:27:472011-03-02 ¿ÀÈÄ 2:27:47

Getting Started

Installing batteries in the Remote Control

* Battery size: AAA

NOTE

✎

Make sure to match the “+” and “–” ends of



the batteries with the diagram inside the compartment.



Assuming typical TV usage, the batteries last for about one year. The remote control can be used up to



approximately 23 feet (7 meters) in a straight line.

Setting the Remote Control

You can control certain functions of your TV with this remote control.

When operating a TV with the remote control

Press the TV button to set the remote control

to TV mode.

Press the POWER button to turn on the TV.

While holding down the POWER button, enter the code corresponding to your brand of TV.

•

If there is more than one code listed for your TV in the table, enter one at a time to determine which code works.

•

Example : For a Samsung TV

While holding down the POWER button, use the number buttons to enter 00, 15, 16, 17 and 40.

If the TV turns off, the setting is complete.

You can use the TV POWER, VOLUME,

•

CHANNEL, and Numeric buttons (0~9).

NOTE

✎

The remote control may not work on some



brands of TV's. Also, some operations may not be possible, depending on your brand of TV.



The remote control will work with Samsung TVs by default.

TV Brand Code List

Brand Code

Admiral

(M.Wards)

A Mark

Anam

AOC

Bell & Howell

(M.Wards)

Brocsonic

Candle

Cetronic

Citizen

Cinema

Classic

Concerto

Contec

Coronado

Craig

Croslex

Crown

Curtis

Mates

CXC

Daewoo

Daytron Dynasty

Emerson

Fisher

Funai

Futuretech

General

Electric (GE)

Hall Mark

Hitachi

Inkel

JC Penny

JVC KTV

KEC KMC

(Goldstar)

Luxman

LXI

(Sears)

Magnavox

Marantz

Matsui

MGA

56, 57, 58

01, 15

01, 02, 03, 04, 05, 06, 07, 08, 09, 10,

11, 12, 13, 14

01, 18, 40, 48

57, 58, 81

59, 60

18 03

03, 18, 25

97 03 18 46 15

03, 05, 61, 82, 83, 84

62 03

59, 61, 63

02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32,

34, 35, 36, 48, 59, 90

40 03

03, 15, 40, 46, 59, 61,

64, 82, 83, 84, 85

19, 65

03 03

06, 40, 56, 59,

66, 67, 68

15, 18, 50, 59, 69

56, 59, 67, 86

59, 61, 87, 88

03, 15, 40

01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44

19, 54, 56, 59,

60, 62, 63, 65, 71

15, 17, 18, 48, 54, 59, 60, 62, 72, 89

40, 54

18, 40

Brand Code

Mitsubishi/

MGA MTC NEC Nikei

Onking

Onwa

Panasonic

Penney

Philco

Philips

Pioneer

Portland

Proton

Quasar

Radio

Shack

RCA/

Proscan

Realistic

Sampo

Samsung

Sanyo

Scott Sears Sharp

Signature

2000

(M.Wards)

Sony Soundesign Spectricon

SSS

Sylvania

Symphonic

Tatung

Techwood

Teknika

TMK

Toshiba Vidtech

Videch

Wards

Yamaha

York

Yupiteru

Zenith Zonda

Dongyang

18, 40, 59, 60, 75

18, 19, 20, 40, 59, 60

06, 07, 08, 09, 54,

66, 67, 73, 74

03, 15, 17, 18, 48, 54, 59, 62, 69, 90

15, 17, 18, 40,

48, 54, 62, 72 63, 66, 80, 91

15, 18, 59

06, 66, 67

17, 48, 56, 60,

61, 75

18, 59, 67, 76, 77,

78, 92, 93, 94

03, 19

00, 15, 16, 17, 40, 43, 46, 47, 48, 49,

59, 60, 98

19, 61, 65

03, 40, 60, 61

15, 18, 19 15, 57, 64

57, 58

50, 51, 52, 53, 55

03, 40

18, 40, 48, 54,

59, 60, 62 61, 95, 96

03, 15, 18, 25

18, 40

19, 57, 63, 71

59, 60, 69

15, 17, 18, 40,

48, 54, 60, 64

58, 79

03, 54

03 03 03

01 18

06 18

18 40 03

18 English

HT-D6530_XAC_0302.indd 18HT-D6530_XAC_0302.indd 18 2011-03-02 ¿ÀÈÄ 2:27:482011-03-02 ¿ÀÈÄ 2:27:48

02 Connections

Connections

This section involves various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Position of the product

Place it on a stand or cabinet shelf, or under the TV stand.

Selecting the Listening Position

The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example : For 32" TV's 6.56 ~ 7.87 feet(2~2.4m)

For 55" TV's 11.5 ~ 13.1 feet(3.5~4m)

Place these speakers in front of your listening position, facing inwards (about 45°)

Front Speakers

Center Speaker

Surround Speakershj

Subwoofer

HT-D6530_XAC_0302.indd 19HT-D6530_XAC_0302.indd 19 2011-03-02 ¿ÀÈÄ 2:27:492011-03-02 ¿ÀÈÄ 2:27:49

toward you. Place the speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers.

It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV.

Place these speakers to the side of your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 2 to 3 feet (60 to 90cm) above your ear, facing slightly downward.

Unlike the front and center speakers, the surround speakers are used to

handle mainly sound effects and sound will not come from them all the time.

The position of the subwoofer is not so critical. Place it anywhere you like.

English 19

Connections

Speaker Components Assembled Speakers

(L) (R)

FRONT

(L) (R)

SURROUND

STAND

STAND BASE

SCREW (5X15): 2EA

SCREW (4X20): 8EA

CENTRE

SUBWOOFER

SPEAKER

CABLE

FRONT

SPEAKER

Installing the Speakers on the Tallboy Stand

Turn the Stand Base upside-down and connect it to

the Stand. Insert small screws (4x20, For connecting Stand &

Stand Base) clockwise into the four holes marked using a screwdriver as shown in the illustration.

CAUTION

When you use a torque screwdriver, be careful not



to put excessive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below 15 kg.f.cm)

Connect the upper Speaker to the assembled Stand.

Insert another large screw (5x15, For connecting Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver.

This is the appearance after the speaker is installed. Follow this steps to install other speaker.

SURROUND

SPEAKER

Stand Base

Stand

Speaker

Stand

CENTRE SPEAKER

SUBWOOFER

20 English

HT-D6530_XAC_0302.indd 20HT-D6530_XAC_0302.indd 20 2011-03-02 ¿ÀÈÄ 2:27:492011-03-02 ¿ÀÈÄ 2:27:49

Connecting The Speakers

VIDEO OUTAUX IN

COMPONENT OUT

OUT

AUX IN

FRONT

SPEAKERS OUT

SUBWOOFER

CENTER FRONT SURROUND

SURROUND

SPEAKER IMPEDANCE : 3

FRONT

SPEAKERS OUT

SUBWOOFER

CENTER FRONT

SURROUND

SPEAKER IMPEDANCE : 3

Press down the terminal tab on the back of the speaker.

Insert the black wire into the black terminal (–) and the red wire into the

red terminal (+), and then release the tab.

Connect the connecting plugs to the back of the product by matching the colors of the speaker plugs to the speaker jacks.

Front Speaker (L)

Center Speaker

Black

Red

Surround Speaker (L)

Surround Speaker (R)

02 Connections

Front Speaker (R)

Subwoofer

IDEO

English 21

HT-D6530_XAC_0302.indd 21HT-D6530_XAC_0302.indd 21 2011-03-02 ¿ÀÈÄ 2:28:022011-03-02 ¿ÀÈÄ 2:28:02

Connections

VIDEO OUTAUX IN

COMPONENT OUT

FRONT

SPEAKERS OUT

SUBWOOFER

CENTER FRONT SURROUND

SURROUND

SPEAKER IMPEDANCE : 3

FRONT

SPEAKERS OUT

SUBWOOFER

CENTER FRONT SURROUND

SURROUND

SPEAKER IMPEDANCE : 3

AUX IN

COMPO

OUT

Connecting the Optional Wireless Receiver Module

To connect the surround speakers wirelessly, you have to purchase the wireless receiver module and TX card from your Samsung retailer.

This product should be connected with the SWA-5000 only.

•

Front Speaker (L)

Center Speaker

Front Speaker (R)

Surround Speaker (L)

Wireless Receiver Module

This product should be connected with the SWA-5000 only.

Subwoofer

Surround Speaker (R)

VIDEO OU

Wireless Receiver Module (SWA-5000)

Press down the terminal tab on the back of the speaker.

Insert the black wire into the black terminal (–) and the red wire into the red terminal (+), and then release the tab.

Connect the connecting plugs to the back of the product by matching

Black

Red

the colors of the speaker plugs to the speaker jacks.

With the product turned off, insert the TX card into the TX Card Connection (WIRELESS) on the back of the product.

COMPONENT OUT

•

Hold the TX card so that the label "WIRELESS" faces upward and

FM ANT

NENT

insert the card into the port.

•

The TX card enables communication between the product and the wireless receiver module.

Connect the left and right surround speakers to the wireless Receiver module.

Plug the power cord of the wireless Receiver module in the wall outlet .

WIRELESS

AUX IN

TX card

VIDE

IDE

22 English

HT-D6530_XAC_0302.indd 22HT-D6530_XAC_0302.indd 22 2011-03-02 ¿ÀÈÄ 2:28:042011-03-02 ¿ÀÈÄ 2:28:04

CAUTION

Do not insert any other card except the TX card dedicated to the product.



If a different TX card is used, the product may be damaged or the card may not be removed easily.



Do not insert the TX card upside down or in the reverse direction.



Insert the TX card when the product is turned off. Inserting the card when it is turned on may cause a problem.



The wireless receiving antenna is built into the wireless receiver module. Keep it away from water and moisture.



For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any obstructions.



If no sound is heard from the wireless surround speakers, switch the mode to Dolby Pro Logic II.



In 2-CH mode, no sound will be heard from the wireless surround speakers.

NOTE

✎

Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is



too close to the product, some sound interruption may be heard due to interference.



If you use a device such as a microwave oven, wireless LAN Card or any other device that uses the same frequency (2.4/5.8GHz) near the product, some sound interruption may be heard due to interference.



The transmission distance from the product to the wireless receiver module is about 33 feet (10m), but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the product and the wireless receiver module, the system may not operate at all, because the radio wave cannot penetrate metal.



If the product doesn't make wireless connection, the system needs ID Setting between the product and wireless receiver module. With the product turned off, press the remote control's number buttons "0"J"1"J"3"J"5". With the wireless receiver module turned on, press "ID SET" button on the back of the wireless receiver module for 5 seconds. And then power on the product (HT-D6530).

02 Connections

English 23

HT-D6530_XAC_0302.indd 23HT-D6530_XAC_0302.indd 23 2011-03-02 ¿ÀÈÄ 2:28:062011-03-02 ¿ÀÈÄ 2:28:06

Connections

FM ANT

iPod

COMPO

OUT

Connecting External Devices/your TV via HDMI

HDMI is the standard digital interface for connecting to devices such as a TV, projector, DVD player, Blu-ray player, set top box, and more.

Because HDMI is all digital, you'll enjoy digital quality video and sound as it was originally created, without the distortions that can be caused when digital content is converted to analog.

DVD or Blu-ray Player SAT(Satellite/Set top box)

HDMI IN

COMPONENT OUT

NENT OUT

SPEAKERS OUT

IDEO OU

VIDEO OUTAUX IN

PEAKERS

CENTER FRONT SURROUND

SUBWOOFER

FRONT

SPEAKER IMPEDANCE : 3

PEAKER IMPEDANCE :

SURROUND

IGITAL

DIGITAL

LAN iPod HDMI OUT

AUDIO IN

AUDIO I

OPTICAL

HDMI IN

HDMI OUT

FM ANT

WIRELES

WIRELESS

AUX IN

HDMI OUT :

Connecting to a TV with an HDMI Cable (BEST QUALITY)

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

NOTE

✎

Certain HDMI output resolutions may not work, depending on your TV.



After making the video connection, set the Video input source on your TV to match the corresponding Video



output (HDMI, Component or Composite) on your product. See your TV owner's manual for more information on how to select the TV's Video Input source. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote



control and select HDMI as the external source of the TV. You must have an HDMI connection to enjoy videos with 3D technology.



A long HDMI cable may cause a screen noise. If this is the case, set Deep Color to Off in the menu.



24 English

HT-D6530_XAC_0302.indd 24HT-D6530_XAC_0302.indd 24 2011-03-02 ¿ÀÈÄ 2:28:062011-03-02 ¿ÀÈÄ 2:28:06

02 Connections

HDMI IN :

Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack

Connecting to an External Component with an HDMI Cable

on your digital device. Press the FUNCTION button to select H. IN1 or H. IN2 input.

The mode switches as follows :

BD/DVD  D. IN  AUX  R. IPOD  W. IPOD  H. IN1  H. IN2  FM

HDMI Auto Detection Function

If you have connected your home theater by HDMI cable, the home theater's video output automatically switches to the HDMI mode when you turn it on. For available HDMI video resolutions, see page 34.

•

This function is not available if the HDMI cable does not support CEC.

•

HDMI connection description

- HDMI outputs only a pure digital signal to the TV.

- If your TV does not support HDCP, random noise appears on the screen.

•

What is the HDCP?

HDCP (High-band width Digital Content Protection) is a system for preventing BD/DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.

CAUTION

The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of the



product.

Connecting the FM Antenna

FM Antenna (supplied)

Connect the FM antenna supplied to the FM

ANTENNA Jack. Slowly move the antenna wire around until you ﬁ nd a

location where reception is good, then fasten it to a

FM ANT

WIRELESS

WIRELES

wall or other rigid surface.

NOTE

✎

This product does not receive AM broadcasts.



English 25

HT-D6530_XAC_0302.indd 25HT-D6530_XAC_0302.indd 25 2011-03-02 ¿ÀÈÄ 2:28:072011-03-02 ¿ÀÈÄ 2:28:07

Connections

Red

Blue Green

METHOD 1

COMPONENT OUT

AUX IN

VIDEO OUTAUX IN

Yellow

SPEAKERS OUT

CENTER FRONT

SUBWOOFER

FRONT

SPEAKER IMPEDANCE : 3

PEAKER IMPEDANCE :

SURROUND

METHOD 2

SURROUND

METHOD 1 : Component Video (BETTER QUALITY)

If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) from the Component Video Output (Pr, Pb and Y) Jacks on the back of the product to the Component Video Input Jacks on your TV.

NOTE

✎

You can select from a variety of resolution settings such as 1080i, 720p, 480p and 480i, depending on the



disc type. (See page 34)



The actual resolution may differ from the setting in the Setup menu if both Component and HDMI cables are connected. The resolution may also be different depending on the disc. (See page 34)



After making the video connection, set the Video input source on your TV to match the corresponding Video output (HDMI, Component or Composite) on your product. See your TV owner's manual for more information on how to select the TV's Video Input source.



If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control and select COMPONENT as the external source of the TV.



In DVD playback, if both HDMI and Component jacks are connected and you select the Component 1080p, 1080i, 720p or 480p mode, the Display Setup menu will show the output resolution as 1080p, 1080i, 720p or 480p in the menu. The resolution is actually 480i.

METHOD 2 : Composite Video

(GOOD QUALITY)

Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack on your TV.

NOTE

✎

The VIDEO source is always output in 480i resolution regardless of the resolution set in the Setup



menu. (See page 34)



the remote control and select VIDEO as the external source of the TV.

CAUTION

Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by



TV SOURCE

button on

26 English

HT-D6530_XAC_0302.indd 26HT-D6530_XAC_0302.indd 26 2011-03-02 ¿ÀÈÄ 2:28:092011-03-02 ¿ÀÈÄ 2:28:09

Connecting Audio from External Components

This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.

FM ANT

WIRELESS

VIDEO OUTAUX IN

HDMI OUT

DIGITAL

AUDIO IN

OPTICAL

COMPONENT OUT

HDMI IN

VIDEO OUT

WIRELESS

FM ANT

HDMI OUT

COMPONENT OUT

02 Connections

Optical Cable

(not supplied)

Audio Cable

(not supplied)

If the external analog

component has only one

Set-Top Box

Audio Out, connect either

left or right.

OPTICAL AUX

OPTICAL : Connecting an External Digital Component

Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).

Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital

component. Press the FUNCTION button to select D.IN input.

•

The mode switches as follows : BD/DVD  D. IN  AUX  R. IPOD  W. IPOD  H. IN1  H. IN2  FM

NOTE

✎

To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV.



This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.



This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be supported.



AUX : Connecting an External Analog Component

Analog signal components such as a VCR.

Connect AUX IN (Audio) on the product to the Audio Out of the external analog component.

Be sure to match connector colors.

•

Press the FUNCTION button to select AUX input.

The mode switches as follows : BD/DVD  D. IN  AUX  R. IPOD  W. IPOD  H. IN1  H. IN2  FM

•

VCR

Red

White

NOTE

✎

You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of



the VCR to this product.

English 27

HT-D6530_XAC_0302.indd 27HT-D6530_XAC_0302.indd 27 2011-03-02 ¿ÀÈÄ 2:28:102011-03-02 ¿ÀÈÄ 2:28:10

Connections

iPod

Connecting to the Network

This product enables you to view network based services (See pages 63~70) such as Smart Hub and BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend using an Wireless router or IP router for the connection. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance.

Cable Network

Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the product to the LAN

1. terminal of your modem.

Set the network options. (See page 40)

DIGITAL

LAN iPod HDMI OUT

IGITAL

AUDIO IN

UDIO I

OPTICAL

HDMI OU

HDMI IN

Router

Broadband

service

Broadband modem

(with integrated router)

Broadband modem

Broadband

service

Networking with PC for

AllShare function

(See page 72)

NOTE

✎

Internet access to Samsung’s software update server may not be allowed, depending on the router you use or the



ISP’s policy. For more information, contact your ISP (Internet Service Provider). For DSL users, please use a router to make a network connection.



For the AllShare function, a PC must be connected in the network as shown in the ﬁ gure.



28 English

HT-D6530_XAC_0302.indd 28HT-D6530_XAC_0302.indd 28 2011-03-02 ¿ÀÈÄ 2:28:112011-03-02 ¿ÀÈÄ 2:28:11

02 Connections

Wireless Network

You can connect to your network with a Wireless IP sharer. A wireless AP/IP router is required to make a wireless network connection. To set the network conﬁ guration options. see page 40.

Broadband

service

Wireless IP sharer

5V 500mA

ASC IN

Networking with PC for AllShare function

(See page 72)

NOTE

✎

To use a wireless network, your product must be connected to a wireless IP sharer. If the wireless IP sharer



supports DHCP, your product can use a DHCP (dynamic) or static IP address to connect to the wireless network.



This product supports IEEE 802.11b,g and n. We recommend using IEEE 802.11n. When you play video over a IEEE 802.11b or g connection, the video may not play smoothly.

Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP



sharer is currently being used by another device nearby, this will result in interference and communication failure.



If you select the Pure High-throughput (Greenﬁ eld) 802.11n mode and set your AP's Security Encryption type to WEP, TKIP or TKIPAES (WPS2Mixed), your Samsung home theater will not support the connection in compliance with new Wi-Fi certiﬁ cation speciﬁ cations.



If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Conﬁ guration) or PIN (Personal Identiﬁ cation Number). WPS will automatically conﬁ gure the SSID and WPA key in either mode.



Connection Methods : You can setup the wireless network connection 3 ways:

- WPS(PBC)

- Auto Setup (Using the Auto Network Search function)

- Manual Setup



Wireless LAN, by its nature, may cause interference, depending on the operating conditions. (AP performance, distance, obstacles, interference by other radio devices, etc).



Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.



When applying the security key for the AP (wireless IP sharer), only the following security protocols are supported:

Authentication Mode : WEP, WPAPSK, WPA2PSK

Encryption Type : WEP, AES



To use the AllShare function, you must connect your PC to your network as shown in the ﬁ gure. The connection can be wired or wireless.

English 29

HT-D6530_XAC_0302.indd 29HT-D6530_XAC_0302.indd 29 2011-03-02 ¿ÀÈÄ 2:28:132011-03-02 ¿ÀÈÄ 2:28:13

Setup

Initial Settings

Turn on your TV after connecting the product.

When you connect and turn on the product to a TV for the ﬁ rst time, the Initial Settings screen appears.

Initial Settings | On-Screen Language

Select a language for the on-screen displays.

Български Hrvatski Čeština Dansk Nederlands English Eesti Suomi Français Deutsch Indonesia Italiano

Press the ▲▼◄► buttons to select the desired language, and then press the ENTER button.

Press the ENTER button to select Start.

Press the ▲▼ buttons to select the desired TV Aspect Ratio, and then press the ENTER button. (See page 33) Musical Room Calibration screen will be displayed.

Plug the ASC microphone into the ASC IN jack on the product. (See page 37)

Press the ENTER button to select Start button. Setting the Musical Room Calibration function takes about 3 minutes.

Press the ▲▼ buttons to select the desired Network Settings : Wired, Wireless

(General), WPS(PBC) or One Foot Connection, and then press the ENTER

button. If you do not know the details of your Network Settings, press the BLUE (D) button on your remote instead to skip Network Settings here, ﬁ nish the Initial Settings, and go to the Home menu. If you selected a Network Settings, go to pages 40~43 for more information about the Network settings. When done, go to Step 8.

The Home menu appears. (For more information about the Home menu, please see page 31.)

Ελληνικά Magyar

한국어

Move " Enter

•

Home Menu

My Contents

Videos

Photos

Music

My Devices Internet Settings

Function

d WPS(PBC)

NOTE

✎

The Home menu will not appear if you do not



conﬁ gure the initial settings except as noted below.



If you press the BLUE (D) button during the Musical Room Calibration/network setup, you can access the Home menu even if the network setup is not completed yet.



If you want to display the Initial Setting screen again to make changes, select the Reset option. (See page 44)



If you use an HDMI cable to connect the product to an Anynet+(HDMI-CEC)compliant Samsung TV and 1.) You have set the Anynet+(HDMI-CEC) feature to On in both the TV and the product and 2.) You have set the TV to a language supported by the product, the product will select that language as the preferred language automatically.

If you leave the product in the stop mode for



more than 5 minutes without using it, a screen saver will appear on your TV. If the product is left in the screen saver mode for more than 20 minutes, the power will automatically turn off.

30 English

HT-D6530_XAC_0302.indd 30HT-D6530_XAC_0302.indd 30 2011-03-02 ¿ÀÈÄ 2:28:152011-03-02 ¿ÀÈÄ 2:28:15

+ 132 hidden pages