Samsung HT-D6500 User Manual

HT-D6500

5.1CH Blu-ray™

Home Entertainment System

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

HT-D6500_ELS_0315.indd 1HT-D6500_ELS_0315.indd 1 2011-03-17 ¿ÀÈÄ 1:35:032011-03-17 ¿ÀÈÄ 1:35:03

Safety Information

Safety Warnings

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates “dangerous
voltage” inside the product that presents
a risk of electric shock or personal injury.

CAUTION :

SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.

WARNING

To reduce the risk of fi re or electric shock, do

•

not expose this appliance to rain or moisture.

CAUTION

Apparatus shall not be exposed to dripping or splashing

•

and no objects fi lled with liquids, such as vases, shall be
placed on the apparatus.

•

The Mains plug is used as a disconnect device and shall
stay readily operable at any time.

•

This apparatus shall always be connected to a AC outlet
with a protective grounding connection.

•

To disconnect the apparatus from the mains, the plug
must be pulled out from the mains socket, therefore the
mains plug shall be readily operable.

TO PREVENT ELECTRIC

CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1

CLASS 1 LASER PRODUCT

This Compact Disc player is classifi ed as a
CLASS 1 LASER product.
Use of controls, adjustments or performance of
procedures other than those specifi ed herein
may result in hazardous radiation exposure.

CAUTION

INVISIBLE LASER RADIATION WHEN OPEN AND

•

INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.

This symbol indicates important
instructions accompanying the
product.

Wiring the Main Power Supply Plug (UK Only)

IMPORTANT NOTICE

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated
on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of
the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug is not
suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a
suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cutting
off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains socket as there is
a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a mains socket. A
plug and fuse must be used at all times.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN
= LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug,
proceed as follows:–The wire coloured BLUE must be connected to the terminal marked with the letter N or
coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the let­ter L or coloured BROWN or RED.

WARNING :

DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH LETTER E OR

BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

2 English

HT-D6500_ELS_0315.indd 2HT-D6500_ELS_0315.indd 2 2011-03-17 ¿ÀÈÄ 1:35:452011-03-17 ¿ÀÈÄ 1:35:45

Precautions

Ensure that the AC power supply in your house complies with the identifi cation sticker located on the back of

•

your product.
Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation

•

(7.5~10cm).
Do not place the product on amplifi ers or other equipment which may become hot.

•

Make sure the ventilation slots are not covered.
Do not stack anything on top of the product.

•

Before moving the product, ensure the Disc Insert Hole is empty.

•

To disconnect the product completely from the power supply, remove the mains plug from the wall outlet.

•

- If you leave the product unused for a long period of time, disconnect the plug from the wall outlet.
During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage

•

the product.
Do not expose the product to direct sunlight or other heat sources. This could lead to overheating and

•

malfunction of the product.
Protect the product from moisture, excess heat, and equipment creating strong magnetic or electric fi elds (i.e.

•

speakers.).
Disconnect the power cable from the AC supply if the product malfunctions.

•

Your product is not intended for industrial use. Use of this product is for personal use only.

•

Condensation may occur if you store your product or a disc in cold temperatures. If transporting the product

•

during the winter, wait approximately 2 hours until the product has reached room temperature before using.
The batteries used with this product contain chemicals that are harmful to the environment.

•

Do not dispose of batteries in the general household trash.

Viewing TV using the 3D function

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and
understand the following safety information before using the TV’s 3D function.

WARNING

Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea and headaches. If you

•

experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest.
Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D

•

TV, remove your 3D Active Glasses, and rest.
A responsible adult should frequently check on children who are using the 3D function. If there are any reports of

•

tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.
Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective

•

goggles, etc.)
Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D

•

Active Glasses while moving around may result in injuries caused by running into objects, tripping, and/or falling.

English 3

HT-D6500_ELS_0315.indd 3HT-D6500_ELS_0315.indd 3 2011-03-17 ¿ÀÈÄ 1:35:452011-03-17 ¿ÀÈÄ 1:35:45

Safety Information

Cautions on Handling and Storing Discs

Small scratches on the disc may reduce sound
and picture quality or cause skipping.

Be especially careful not to scratch discs when
handling them.

Holding discs

Do not touch the playback side of the disc.

•

Hold the disc by the edges so that

•

fi ngerprints will not get on the surface.
Do not stick paper or tape on the disc.

•

Disc Storage

Do not keep in direct sunlight

•

Keep in a cool ventilated area

•

Keep in a clean Protection jacket.

•

Store vertically.

NOTE

✎

Do not allow the discs to become contaminated with



dirt.
Do not load cracked or scratched discs.



Handling and Storing Discs

If you get fingerprints or dirt on the disc, clean it with a
mild detergent diluted in water and wipe with a soft cloth.

When cleaning, wipe gently from the inside to

•

the outside of the disc

NOTE

✎

Condensation may form if warm air comes into



contact with cold parts inside the product. When
condensation forms inside the product, it may not
operate correctly. If this occurs, remove the disc
and let the product stand for 1 or 2 hours with the
power on.

Dolby and the double-D symbol are registered trademarks of Dolby

•

Laboratories.
"ABOUT DIVX VIDEO: DivX® is a digital video format

•

created by DivX, Inc. This is an offi cial DivX
Certifi ed® device that plays DivX video. Visit www.divx.com for more
information and software tools to convert your fi les into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certifi ed® device must be
registered in order to play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate the DivX VOD section in
your device setup menu. Go to vod.divx.com for more information on
how to complete your registration.

DivX Certifi ed® to play DivX® video up to HD 1080p, including
premium content.
DivX®, DivX Certifi ed® and associated logos are trademarks of DivX,
Inc. and are used under licence."

Covered by one or more of the following U.S. patents : 7,295,673;
7,460,668; 7,515,710; 7,519,274

•

HDMI, the HDMI Logo, and High-Defi nition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC in the United States and other countries.

•

Oracle and Java are registered trademarks of Oracle and/or its
affi liates. Other names may be trademarks of their respective owners.

•

This item incorporates copy protection technology that is protected by
U.S. patents and other intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are prohibited.

•

Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray
Disc Association.

•

iPod is a trademark of Apple Inc.,
registered in the U.S. and other
countries. iPhone is a trademark of
Apple Inc.

< Open Source Licence Notice >

•

In the case of using open source software, Open Source
Licenses are available on the product menu.

© 2011 Samsung Electronics Co., Ltd. All rights reserved.

Licence

Copyright

4 English

HT-D6500_ELS_0315.indd 4HT-D6500_ELS_0315.indd 4 2011-03-17 ¿ÀÈÄ 1:35:452011-03-17 ¿ÀÈÄ 1:35:45

Contents

SAFETY INFORMATION

2

GETTING STARTED

7

CONNECTIONS

17

SETUP

27

2 Safety Warnings
3 Precautions
4 Cautions on Handling and Storing Discs
4 Licence
4 Copyright

7 Icons that will be used in manual
8 Disc Types and Characteristics
12 Accessories
13 Description
13 Front Panel
14 Rear Panel
15 Remote Control

17 Connecting the Speakers
19 Connecting the Optional Wireless Receiver Module
21 Attaching the Toroidal Ferrite Core to the Power Cord of

the Main Unit
21 Connecting External Devices/your TV via HDMI
22 Connecting the FM Antenna
24 Connecting Audio from External Components
25 Connecting to the Network

27 Initial Settings
28 Accessing the Settings Menu
29 Display
29 3D Settings
30 TV Aspect
30 Smart Hub Screen Size
30 BD Wise (Samsung Products only)
30 Resolution
32 HDMI Color Format
32 Movie Frame (24 Fs)
32 HDMI Deep Color
32 Still Mode
32 Progressive Mode
33 Audio
33 Speaker Settings
34 Musical Auto Calibration
34 User EQ
35 HDMI Audio
35 Audio Return Channel
35 Digital Output
36 Dynamic Range Control
37 Audio Sync
37 Network
37 Network Settings
40 Network Status
40 BD-LIVE Internet Connection
41 System
41 Initial Settings
41 Anynet+ (HDMI-CEC)
41 BD Data Management
41 Time Zone
41 DivX® Video On Demand
41 Reset
42 Language

ENGLISH

English 5

HT-D6500_ELS_0315.indd 5HT-D6500_ELS_0315.indd 5 2011-03-17 ¿ÀÈÄ 1:35:462011-03-17 ¿ÀÈÄ 1:35:46

Contents

SETUP

42

BASIC FUNCTIONS

45

NETWORK SERVICES

61

42 Security
42 BD Parental Rating
42 DVD Parental Rating
42 Change Password
42 General
42 Front Display
42 Network Remote Control
43 Support
43 Software Upgrade
44 Contact Samsung

45 Playing a Disc
45 Using the Disc menu / Title menu / Popup menu
46 Using the Search and Skip Functions
47 Slow Motion Play/Step Motion Play
47 Repeat Playback
48 Using the TOOLS button
50 Listening to Music
52 Sound Mode
53 Playing back a Picture
54 Playing back a USB Storage Device
55 Listening to Radio
57 Connecting iPod/iPhone Using the USB Cable
57 Connecting iPod/iPhone Using the Dock
58 Use iPod/iPhone with a Wireless Dock Cradle (sold

separately) for iPod/iPhone
59 iPod/iPhone Models You Can Use with This Product
60 How to Link the Wireless Transmitter with the Main Unit

61 Using Smart Hub
68 Samsung Apps
70 Using vTuner Function
70 BD-LIVE™
70 Using the AllShare Function

OTHER INFORMATION

71 Troubleshooting
74 Specifi cations

71

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product

•
appearance.

An administration fee may be charged if either

•

an engineer is called out at your request and there is no defect in the product

a.

(i.e. where you have failed to read this user manual)
you bring the unit to a repair centre and there is no defect in the product

b.

(i.e. where you have failed to read this user manual).

The amount of such administration charge will be advised to you before any work or home visit is carried out.

•

6 English

HT-D6500_ELS_0315.indd 6HT-D6500_ELS_0315.indd 6 2011-03-17 ¿ÀÈÄ 1:35:462011-03-17 ¿ÀÈÄ 1:35:46

Getting Started

Icons that will be used in manual

Make sure to check the following terms before reading the user manual.

Term Logo Icon Definition

01 Getting Started

BD-ROM

BD-RE/-R

DVD-VIDEO

DVD-RW(V)

DVD-R

DVD+RW

DVD+R

Audio CD

MP3

WMA

JPEG

DivX
MKV
MP4

USB storage

device

CAUTION

NOTE

Shortcut Key

-

-

DivX

-

-

-

-

h
z
Z

y

o
w
G

x

F

This involves a function available on a BD-ROM.

This involves a function available on a BD-RE/-R disc recorded in the
BD-RE format.

This involves a function available on a DVD-VIDEO.

This involves a function available on recorded DVD+RW or DVD-RW(V)/
DVD-R/+R discs that have been recorded and fi nalized.

This involves a function available on an audio CD-RW/-R (CD-DA format).

This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a
USB storage media containing MP3 or WMA contents.

This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a
USB storage media containing JPEG contents.

This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a
USB storage media containing DivX contents.

This involves a function available on a USB storage device.

This involves a situation where a function does not operate or settings may

!

be cancelled.

This involves tips or instructions on the page that help each function

✎

operate.

This function provides direct and easy access pressing the button on
the remote control.

This product is compatible with the PAL colour system only.

•

NTSC discs will not play.

•

English 7

HT-D6500_ELS_0315.indd 7HT-D6500_ELS_0315.indd 7 2011-03-17 ¿ÀÈÄ 1:35:462011-03-17 ¿ÀÈÄ 1:35:46

Getting Started

Disc Types and Characteristics

Blu-ray Disc Compatibility

Blu-ray is a new and evolving format. Accordingly, disc
compatibility issues are possible. Not all discs are
compatible and not every disc will play back. For
additional information, refer to the Disc Types and
Characteristics section of this Manual.

NOTE

✎

Playback may not work for some types of discs, or



when specifi c operations, such as angle change
and aspect ratio adjustment, are being performed.
Information about the discs is written in detail on
the box. Please refer to this if necessary.
Do not allow the disc to become dirty or scratched.



Fingerprints, dirt, dust, scratches or deposits of
cigarette smoke on the recording surface may
make it impossible to use the disc for playback.
When a BD-Java title is played, loading may take



longer than a normal title, or some functions may
perform slowly.

Discs that cannot be played

HD DVD Disc

•

DVD-RAM

•

3.9 GB DVD-R Disc for Authoring.

•

DVD-RW(VR mode)

•

Super Audio CD(except CD layer)

•

DVD-ROM/PD/MV-Disc, etc CVD/CD-ROM/

•

CDV/CD-G/CD-I/LD
CDGs play audio only, not graphics.

•

Logos of Discs that can be played

Blu-ray Disc 3D Blu-ray Disc

Dolby Digital Plus

Dolby TrueHD

Java

PAL broadcast system in

U.K, France, Germany, etc.

DTS-HD High Resolution

Audio

DTS-HD Master Audio |

Essential

NOTE

✎

Some commercial discs and DVD discs purchased



outside your region may not be playable with this
product.
If a DVD-R/-RW disc has not been recorded properly



in DVD video format, it will not be playable.

BD-LIVE

8 English

HT-D6500_ELS_0315.indd 8HT-D6500_ELS_0315.indd 8 2011-03-17 ¿ÀÈÄ 1:35:472011-03-17 ¿ÀÈÄ 1:35:47

01 Getting Started

Region Code

Both the product and the discs are coded by
region. These regional codes must match in
order to play the disc. If the codes do not match,
the disc will not play.

Disc Type

Blu-ray

DVD-VIDEO

Region

Code

North America, Central America,
South America, Korea, Japan,

A

Taiwan, Hong Kong and South
East Asia.

Europe, Greenland, French
territories, Middle East, Africa,

B

Australia and New Zealand.

India, China, Russia, Central and

C

South Asia.

The U.S., U.S. territories and

1

Canada

Europe, Japan, the Middle East,

2

Egypt, South Africa, Greenland

Taiwan, Korea, the Philippines,

3

Indonesia, Hong Kong

Mexico, South America, Central
America, Australia, New Zealand,

4

Pacifi c Islands, Caribbean

Russia, Eastern Europe, India,
most of Africa, North Korea,

5

Mongolia

China

6

Area

Disc Types

BD-ROM

This Blu-ray disc can only be played back.
This product can play back pre-recorded
commercial BD-ROM discs.

BD-RE/-R

This Blu-ray disc can be recorded and played back.
This product can play back a BD-RE/-R disc
recorded by other compatible Blu-ray disc
recorders.

DVD-VIDEO

This product can play back pre-recorded commercial

•

DVD discs (DVD-VIDEO discs) with movies.
When switching from the fi rst layer to the second

•

layer of a dual-layered DVD-VIDEO disc, there
may be momentary distortion in the image and

product

sound. This is not a malfunction of the

DVD-RW/-R/+R

This

product
recorded and fi nalized with a DVD video recorder.
Ability to play back may depend on recording
conditions.

DVD+RW

•

This product can play back a DVD+RW disc
recorded with a DVD Video recorder. Ability to
play back may depend on recording conditions.

Audio CD (CD-DA)

•

This
CD-RW/-R discs.

•

The product may not be able to play some CD­RW/-R discs due to the condition of the
recording.

CD-RW/-R

•

Use a 700MB(80 minutes) CD-RW/-R disc.
If possible, do not use a 800MB(90 minutes) or
above disc, as the disc may not play back.

If the CD-RW/-R disc was not recorded as a

•

closed session, you may experience delays when
playing back the beginning of the disc or all
recorded fi les may not play.

•

Some CD-RW/-R discs may not be playable with
this product, depending on the device which was
used to burn them. For contents recorded on CD­RW/-R media from CDs for your personal use,
playability may vary depending on contents and
discs.

can play back a DVD-RW/-R/+R disc

product

can play back CD-DA format audio

.

English 9

HT-D6500_ELS_0315.indd 9HT-D6500_ELS_0315.indd 9 2011-03-17 ¿ÀÈÄ 1:35:482011-03-17 ¿ÀÈÄ 1:35:48

Getting Started

Disc Format

Using JPEG disc

CD-R/-RW, DVD-RW/-R recorded with UDF or JOLIET format can be played back.

•

Only JPEG fi les with the ".jpg", ".JPG", ".jpeg" or "JPEG" extension can be displayed.

•

Progressive JPEG is supported.

•

DVD-RW/-R (V)

•

This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played by this
product once it has been fi nalized.

•

If a disc that has been recorded in Video Mode by a different maker’s recorder but has not been fi nalized, it
cannot be played by this product.

Supported File Formats

Video File Support

File Extension Container Video Codec Audio Codec Resolution

1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080

1920x1080
1920x1080
1920x1080

1920x1080

1920x1080

*.avi

*.mkv

*.asf

*.wmv

*.mp4

*.3gp

DivX 3.11/4.x/5.1/6.0

XviD

AVI

MKV

ASF

ASF Window Media Video v9

MP4

3GPP

H.264 BP/MP/HP

MPEG4 SP/ASP

Motion JPEG

DivX 3.11/4.x/5.1/6.0

XviD

H.264 BP/MP/HP

MPEG4 SP/ASP

Motion JPEG

DivX 3.11/4.x/5.1/6.0

XviD

H.264 BP/MP/HP

MPEG4 SP/ASP

Motion JPEG

H.264 BP/MP/HP

MPEG4 SP/ASP

XVID

H.264 BP/MP/HP

MPEG4 SP/ASP

MP3
AC3

LPCM

ADPCM

DTS Core

MP3
AC3

LPCM

ADPCM

DTS Core

MP3
AC3

LPCM

ADPCM

WMA

WMA 1920x1080

MP3

ADPCM

AAC

ADPCM

AAC

HE-AAC

10 English

HT-D6500_ELS_0315.indd 10HT-D6500_ELS_0315.indd 10 2011-03-17 ¿ÀÈÄ 1:35:492011-03-17 ¿ÀÈÄ 1:35:49

File Extension Container Video Codec Audio Codec Resolution

*.vro

*.mpg

*.mpeg

*.ts

*.tp

*.trp

VRO
VOB

PS

TS

MPEG2

MPEG1

MPEG1
MPEG2

H.264

MPEG2

H.264

VC1

AC3
MPEG
LPCM

AC3
MPEG
LPCM

AAC

AC3

AAC

MP3
DD+

HE-AAC

1920x1080

352x288

352x288

1920x1080

1920x1080

1920x1080
1920x1080

1920x1080

Restrictions

Some of the Codecs above listed are not supported if having a problem with the contents.

•
Video source with incorrect container information or if corrupt will not be played properly.

•
AV source with more than the standard bit rate or frame rate may not be played properly.

•
If the index table is corrupt, the Seek (Jump) function will not be supported.

•
If you play a video via the network, it may not be played properly depending on the network status.

•

Video decoder

Up to H.264 Level 4.1 supported.

•
H.264 FMO/ASO/RS, VC1 SP/MP/AP L4, AVCHD not supported.

•
XVID, MPEG4 SP, ASP :

•

- Below 1280 x 720: 60 frame max

- Above 1280 x 720: 30 frame max
GMC 2 or higher not supported.

•

01 Getting Started

Audio decoder

Up to WMA 7,8,9 supported.

•
WMA 9 PRO with more than two channels (multi-channel) not supported.

•
WMA 9 Lossless, Voice not supported.

•
WMA sampling rate at 22050Hz mono not supported.

•

Music File Support

File Extension Container Audio Codec Support Range

*.mp3

*.wma

MP3

WMA

MP3 -

Compliant with WMA version 10

WMA

* Sampling rates (in kHz) - 8, 11, 16, 22, 32,

44.1, 48

* Bit rates - All bit-rates in the range 5kbps to

384kbps

English 11

HT-D6500_ELS_0315.indd 11HT-D6500_ELS_0315.indd 11 2011-03-17 ¿ÀÈÄ 1:35:492011-03-17 ¿ÀÈÄ 1:35:49

Getting Started

Notes on USB connection

Supported devices:

USB storage media, MP3 player, digital camera,
USB card reader

1)

Does not support if a folder or fi le name is
longer than 125 characters.

2)

A subtitle fi le bigger than 300 KB may not be
properly displayed.

3)

A certain USB/digital camera device may not
be compatible with the product.

4)

FAT16 and FAT32 fi le systems are
supported.

5)

Photo (JPEG), music (MP3) and video fi le
should have their names in Korean or English.
Otherwise, the fi le may not played.

Accessories

Check for the supplied accessories below.

Connect directly to the product's USB port.

6)
Connecting through another cable may raise
problems with USB compatibility.

Inserting more than one memory device to a

7)
multi-card reader may not operate properly.

PTP protocol for digital camera is not

8)
supported.

Do not disconnect USB device during a

9)
"loading" process.

Bigger the image resolution, the longer the

10)

delay to displaying.

11)

DRM applied MP3 fi les downloaded from a

commercial site are not played back.

Video Cable FM Antenna iPod Dock User's Manual

FUNCTION

POWER

TV SOURCE

RECEIVER SLEEP

TV

BD

TARDS DISPLAY

123

PTY- PTY SEARCH PTY+

456

7809

REPEATFULL SCREEN

MUTE

TUNING

VOL

/CH

SFE MODE

DISC MENU MENU TITLE MENU

POPUP

TOOLS

INFO

RETURN

EXIT

TUNER

MO/ST

iPod SYNC

MEMORY

AB

CD

S/W LEVEL

SMART SEARCH

2D→3D

HUB

DSP

vTuner

3D SOUND

PL

Remote Control/

Batteries (AAA size)

ASC Microphone Soft Cloth Toroidal Ferrite Core

(For Power cord)

Wireless Dock Cradle for iPod/iPhone : HT-WDC10 (sold separately)

L
IN
K

STANDB

Y

CHARGE

Wireless Transmitter Charging Cradle DC Power Cord DC Power Adapter

12 English

HT-D6500_ELS_0315.indd 12HT-D6500_ELS_0315.indd 12 2011-03-17 ¿ÀÈÄ 1:35:492011-03-17 ¿ÀÈÄ 1:35:49

Front Panel

ASC IN

5V
500mA

01 Getting Started

Description

1 32 4 5

1

POWER BUTTON ( )

FUNCTION BUTTON

2

DISPLAY

3

STOP BUTTON

4

PLAY/PAUSE BUTTON

5

ENTER BUTTON

6

EJECT BUTTON

7

6

7128 9

Turns the product on and off.
The mode switches as follows :

BD/DVD  D. IN  AUX  R. IPOD  W. IPOD  H. IN1  H. IN2  FM

Displays the playing status, time, etc.

Stops disc playback.

Plays a disc or pauses playback.

Selects menu items or starts a Blu-ray disc. (It will not start a DVD disc.)

Ejects a Disc.

10 11

DISC SLOT

8

REMOTE CONTROL SENSOR

9

ASC IN JACK

10

VOLUME CONTROL

11

USB PORT

12

NOTE

✎

You can perform software upgrades using the USB Host jack with a USB memory fl ash stick only.



When the product displays the Blu-ray disc menu, you cannot start the movie by pressing the PLAY button on the



product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the
ENTER button.

HT-D6500_ELS_0315.indd 13HT-D6500_ELS_0315.indd 13 2011-03-17 ¿ÀÈÄ 1:35:512011-03-17 ¿ÀÈÄ 1:35:51

Insert disc here.

Detects signals from the remote control.

Used to connect the ASC Microphone for setting up MAC (Musical Auto Calibration).

Volume adjustment.
You can connect a USB memory fl ash stick here and use it as storage when the product is

connected to BD-LIVE. You can also use the USB Host for software upgrades and MP3/JPEG/
DivX/MKV/MP4 playback. And also it is possible to use R. IPOD when iPod is connected.

English 13

Getting Started

FM ANT

WIRELESS

VIDEO OUTAUX IN

LAN iPod HDMI OUT

DIGITAL
AUDIO IN

OPTICAL

COMPONENT OUT

HDMI IN

FRONT

SPEAKERS OUT

SPEAKER IMPEDANCE : 3

SURROUND

SUBWOOFER

CENTER FRONT

SURROUND

Rear Panel

1 2 3 4 5 6 7 8

LAN TERMINAL

1

iPod JACK

2

EXTERNAL DIGITAL AUDIO IN JACK

3

(OPTICAL)

HDMI OUT JACK

4

HDMI IN JACKS

5

FM ANTENNA JACK

6

TX CARD CONNECTION (WIRELESS)

7

AUX IN JACKS

8

COMPONENT VIDEO OUT JACKS

9

VIDEO OUT JACK

10

5.1 CHANNEL SPEAKER OUTPUT

11

CONNECTORS

COOLING FAN

12

9 10 11 12

Can be used for network based services (see pages 61~70),
BD-LIVE and software upgrade under the network connection.

Connect the iPod dock connector here.

Use this to connect external equipment capable of digital output.

Use an HDMI cable, connect this HDMI output terminal to the HDMI
input terminal on your TV for the best quality picture.

Receives digital video and audio signals simultaneously using an
HDMI cable.

Connect the FM antenna.

The TX card enables communication between the product and the
optional wireless receiver module.

Connect to the 2CH analogue output of an external device
(such as a VCR)

Connect a TV with Component video inputs to these jacks.

Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT
Jack on this product.

Connect the front, centre, surround, subwoofer speakers.

The cooling fan supplies cool air to the product to prevent overheating
and always revolves when the power is on.

CAUTION

!

Ensure a minimum of 10 cm of clear space on all sides of the cooling fan when installing the product.



Do not obstruct the cooling fan or ventilation holes.



14 English

HT-D6500_ELS_0315.indd 14HT-D6500_ELS_0315.indd 14 2011-03-17 ¿ÀÈÄ 1:35:512011-03-17 ¿ÀÈÄ 1:35:51

Tour of the Remote Control

01 Getting Started

Remote Control

Turn the product on and off.

If you want to change to TV mode,

press the TV button.

If you want to change to Home Cinema,

press the BD button.

Press numeric buttons to operate options.

Press this to see the full screen on a TV.

Press to skip backwards or forwards.

Press to stop/play a disc.

Cut off the sound temporarily.

Adjust the volume.

Press this to move to the home menu.

Press to view the disc menu.

Press this to use the Tools menu.

Select on-screen menu items and

change menu value.

Return to the previous menu.

Correct the audio synchronization

when playing the iPod video content.

These buttons are used both for menus

on the product and also several

Blu-ray Disc functions.

Press this to use the Smart Hub.

Press to apply 3D Sound effect.

Press this to search a contents.

Select the desired Dolby Pro

Logic II audio mode.

POWER

RECEIVER SLEEP

BD TV

RDS DISPLAY

FUNCTION

TV SOURCE

TA

123

PTY+PTY SEARCHPTY-

456

7809

REPEATFULL SCREEN

MUTE

VOL

DISC MENU MENU TITLE MENU

TOOLS

RETURN

iPod SYNC

AB

HUB

TUNING

SFE MODE

/CH

POPUP

INFO

TUNER

MEMORY

CD

S/W LEVEL

2D→3DSMART SEARCH

DSP

EXIT

MO/ST

vTuner3D SOUND

This is mode selection button.
or
Press to select TV's video mode.

Set a Sleep time to shut off the
product.

To eject the disc.

Use the RDS function to receive
FM stations.

Allows you to repeat a title, chapter,
track or disc.

Press to search backwards or
forwards.

Press to pause a disc.

Search for active FM stations and
change channels.

You can set the SFE(Sound Field
Effect) mode best suited for the
type of music you are listening to.

Use this to enter the popup
menu/title menu.

Use this to display the playback
information when playing
a Blu-ray/DVD disc.

Press this to exit the menu.

Used to set a preset radio frequency.
Select MONO or STEREO for radio

broadcasting.

Press to enjoy an ordinary 2D video
in 3D mode.

Press this to use the vTuner.
Used to adjust the level of the

subwoofer.
Regulate and stabilize the volume

level. (Digital Signal Processor)

English 15

HT-D6500_ELS_0315.indd 15HT-D6500_ELS_0315.indd 15 2011-03-17 ¿ÀÈÄ 1:35:522011-03-17 ¿ÀÈÄ 1:35:52

Getting Started

Installing batteries in the Remote Control

* Battery size: AAA

NOTE

✎

Make sure to match the “+” and “–” ends of



the batteries with the diagram inside the
compartment.



Assuming typical TV usage, the batteries last
for about one year.
The remote control can be used up to



approximately 7 meters in a straight line.

Setting the Remote Control

You can control certain functions of your TV with
this remote control.

When operating a TV with the remote control

Press the TV button to set the remote control

1.

to TV mode.

2.

Press the POWER button to turn on the TV.

3.

While holding down the POWER button, enter
the code corresponding to your brand of TV.

•

If there is more than one code listed for
your TV in the table, enter one at a time to
determine which code works.

•

Example : For a Samsung TV

While holding down the POWER button, use the
number buttons to enter 00, 15, 16, 17 and 40.

If the TV turns off, the setting is complete.

4.

You can use the TV POWER, VOLUME,

•

CHANNEL, and Numeric buttons (0~9).

NOTE

✎

The remote control may not work on some



brands of TV's. Also, some operations may not
be possible, depending on your brand of TV.



The remote control will work with Samsung TVs
by default.

TV Brand Code List

Brand Code

Admiral

(M.Wards)

A Mark

Anam

AOC

Bell &
Howell

(M.Wards)

Brocsonic

Candle

Cetronic

Citizen
Cinema
Classic

Concerto

Contec

Coronado

Craig

Croslex

Crown

Curtis

Mates

CXC

Daewoo

Daytron
Dynasty

Emerson

Fisher

Funai

Futuretech

General

Electric (GE)

Hall Mark

Hitachi

Inkel

JC Penny

JVC

KTV
KEC
KMC

LG

(Goldstar)

Luxman

LXI

(Sears)

Magnavox

Marantz

Matsui

MGA

56, 57, 58

01, 15

01, 02, 03, 04, 05,
06, 07, 08, 09, 10,

11, 12, 13, 14

01, 18, 40, 48

57, 58, 81

59, 60

18
03

03, 18, 25

97
03
18
46
15

03, 05, 61, 82, 83, 84

62
03

59, 61, 63

03

02, 03, 04, 15, 16,
17, 18, 19, 20, 21,
22, 23, 24, 25, 26,
27, 28, 29, 30, 32,

34, 35, 36, 48, 59, 90

40
03

03, 15, 40, 46, 59, 61,

64, 82, 83, 84, 85

19, 65

03
03

06, 40, 56, 59,

66, 67, 68

40

15, 18, 50, 59, 69

45

56, 59, 67, 86

70

59, 61, 87, 88

03, 15, 40

15

01, 15, 16, 17, 37, 38,
39, 40, 41, 42, 43, 44

18

19, 54, 56, 59,

60, 62, 63, 65, 71

15, 17, 18, 48, 54,
59, 60, 62, 72, 89

40, 54

54

18, 40

Brand Code

Mitsubishi/

MGA
MTC
NEC
Nikei

Onking

Onwa

Panasonic

Penney

Philco

Philips

Pioneer

Portland

Proton
Quasar

Radio
Shack

RCA/

Proscan
Realistic

Sampo

Samsung

Sanyo
Scott
Sears
Sharp

Signature

2000

(M.Wards)

Sony
Soundesign
Spectricon

SSS

Sylvania

Symphonic

Tatung

Techwood

Teknika

TMK

Toshiba

Vidtech

Videch

Wards

Yamaha

York

Yupiteru

Zenith
Zonda

Dongyang

18, 40, 59, 60, 75

18, 19, 20, 40, 59, 60

06, 07, 08, 09, 54,

66, 67, 73, 74

03, 15, 17, 18, 48,
54, 59, 62, 69, 90

15, 17, 18, 40,

48, 54, 62, 72
63, 66, 80, 91

15, 18, 59

06, 66, 67

17, 48, 56, 60,

61, 75

18, 59, 67, 76, 77,

78, 92, 93, 94

03, 19

00, 15, 16, 17, 40,
43, 46, 47, 48, 49,

59, 60, 98

19, 61, 65

03, 40, 60, 61

15, 18, 19
15, 57, 64

57, 58

50, 51, 52, 53, 55

03, 40

18, 40, 48, 54,

59, 60, 62
61, 95, 96

03, 15, 18, 25

18, 40

19, 57, 63, 71

59, 60, 69

15, 17, 18, 40,

48, 54, 60, 64

58, 79

03, 54

18

03
03
03

18

40

40

01
18

06
18

18

18
40
03

01

16 English

HT-D6500_ELS_0315.indd 16HT-D6500_ELS_0315.indd 16 2011-03-17 ¿ÀÈÄ 1:35:522011-03-17 ¿ÀÈÄ 1:35:52

02 Connections

Connections

This section involves various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Position of the product

Place it on a stand or cabinet shelf, or under the TV
stand.

Selecting the Listening Position

The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from
the TV.
Example : For 32" TV's 2~2.4m

For 55" TV's 3.5~4m

Front Speakers

ei

SW

Place these speakers in front of your listening position, facing inwards (about 45°)
toward you. Place the speakers so that their tweeters will be at the same height
as your ear. Align the front face of the front speakers with the front face of the
centre speaker or place them slightly in front of the centre speakers.

Centre Speaker

Surround Speakershj

Subwoofer

CAUTION

!

Do not let children play with or near the speakers. They could get hurt if a speaker falls.



When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.



Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien substances



into the duct (hole) of the subwoofer speaker.
Do not hang the subwoofer on the wall through the duct (hole).



NOTE

✎

If you place a speaker near your TV set, screen colour may be distorted because of the magnetic fi eld generated by the



speaker. If this occurs, place the speaker away from your TV set.

f

g

It is best to install it at the same height as the front speakers. You can also install it
directly over or under the TV.

Place these speakers to the side of your listening position. If there isn't enough
room, place these speakers so they face each other. Place them about 60 to
90cm above your ear, facing slightly downward.

Unlike the front and centre speakers, the surround speakers are used to

*

handle mainly sound effects and sound will not come from them all the time.

The position of the subwoofer is not so critical. Place it anywhere you like.

English 17

HT-D6500_ELS_0315.indd 17HT-D6500_ELS_0315.indd 17 2011-03-17 ¿ÀÈÄ 1:35:532011-03-17 ¿ÀÈÄ 1:35:53

Connections

FRONT

SPEAKERS OUT

SPEAKER IMPEDANCE : 3

VIDEO OUT

SURROUND

SUBWOOFER

CENTER FRONT

SURROUND

ONENT OUT

VIDEO OUT

NT OUT

FRONT

SPEAKERS OUT

SPEAKER IMPEDANCE : 3

SURROUND

SUBWOOFER

CENTER FRONT

SURROUND

Speaker Components

(L)

(R)

(L) (R)

FRONT

SURROUND

CENTRE

SUBWOOFER

Connecting The Speakers

Press down the terminal tab on the back of the speaker.

1.

Insert the black wire into the black terminal (–) and the red wire into the

2.

red terminal (+), and then release the tab.

3.

Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks.

Surround Speaker (L)

Front Speaker (L)

Centre Speaker

Subwoofer

SPEAKER CABLE

Black

Front Speaker (R)

Surround Speaker (R)

Red

18 English

HT-D6500_ELS_0315.indd 18HT-D6500_ELS_0315.indd 18 2011-03-17 ¿ÀÈÄ 1:35:532011-03-17 ¿ÀÈÄ 1:35:53

FRONT

SPEAKERS OUT

SPEAKER IMPEDANCE : 3

VIDEO OUT

SURROUND

SUBWOOFER

CENTER FRONT

SURROUND

ONENT OUT

VIDEO OUT

NT OUT

FRONT

SPEAKERS OUT

SPEAKER IMPEDANCE : 3

SURROUND

SUBWOOFER

CENTER FRONT

SURROUND

Removing/Installing the speaker on the stand

* Front Speakers only

How to remove the speaker

If you attach the speaker on the wall, remove the stand
before using it.

Pull out the stand in the arrow direction as shown.

1.

Be careful not to put excessive force when removing it.

•

Otherwise, it can be damaged.

This is the appearance after the stand is removed.

2.

How to install the speaker

Connect the stand in the arrow direction so that it fi ts the

1.

corresponding holes (x4) on the speaker.

Fully insert the stand in the arrow direction as shown.

2.

This is the appearance after the speaker unit is installed.

3.

02 Connections

Connecting the Optional Wireless Receiver Module

To connect the surround speakers wirelessly, you have to purchase the wireless receiver module and
TX card from your Samsung retailer.

This product should be connected with the SWA-5000 only.

•

Surround
Speaker (L)

Centre Speaker

Subwoofer

Surround
Speaker (R)

Front Speaker (L)

Front Speaker (R)

Wireless Receiver Module

HT-D6500_ELS_0315.indd 19HT-D6500_ELS_0315.indd 19 2011-03-17 ¿ÀÈÄ 1:35:572011-03-17 ¿ÀÈÄ 1:35:57

English 19

Connections

E

T

VIDE

AUX IN

T

Wireless Receiver Module (SWA-5000)

Press down the terminal tab on the back of the speaker.

1.

Insert the black wire into the black terminal (–) and the red wire into the

2.

red terminal (+), and then release the tab.
Connect the connecting plugs to the back of the product by matching the

3.

colours of the speaker plugs to the speaker jacks.
With the product turned off, insert the TX card into the

4.

TX Card Connection (WIRELESS) on the back of the product.

Hold the TX card so that the label "WIRELESS" faces upward

•

and insert the card into the port.
The TX card enables communication between the product and

•

the wireless receiver module.

Connect the left and right surround speakers to the wireless Receiver

5.

module.
Plug the power cord of the wireless Receiver module in the wall

6.

outlet .

CAUTION

!

Do not insert any other card except the TX card dedicated to



the product.
If a different TX card is used, the product may be damaged or
the card may not be removed easily.



Do not insert the TX card upside down or in the reverse direction.



Insert the TX card when the product is turned off. Inserting the card when it is turned on may
cause a problem.



The wireless receiving antenna is built into the wireless receiver module. Keep it away from water
and moisture.



For optimal listening performance, make sure that the area around the wireless receiver module
location is clear of any obstructions.



If no sound is heard from the wireless surround speakers, switch the mode to Dolby Pro
Logic II.



In 2-CH mode, no sound will be heard from the wireless surround speakers.

Black

FM ANT

WIRELESS

Red

COMPONENT OU

COMPONENT OU

AUX IN

TX card

VID

NOTE

✎

Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is



too close to the product, some sound interruption may be heard due to interference.
If you use a device such as a microwave oven, wireless LAN Card or any other device that uses



the same frequency (2.4/5.8GHz) near the product, some sound interruption may be heard due
to interference.

The transmission distance from the product to the wireless receiver module is about 10m, but may



vary depending on your operating environment. If a steel-concrete wall or metallic wall is between
the product and the wireless receiver module, the system may not operate at all, because the radio
wave cannot penetrate metal.

If the product doesn't make wireless connection, the system needs ID Setting between the



product and wireless receiver module.
"0"J"1"J"3"J"5" number buttons and then turn on the unit.

With the main unit turned off, press the remote control's

With the wireless receiver module
turned on, press "ID SET" button on the back of the wireless receiver module for 5 seconds.
And then power on the product (HT-D6500).

20 English

HT-D6500_ELS_0315.indd 20HT-D6500_ELS_0315.indd 20 2011-03-17 ¿ÀÈÄ 1:36:012011-03-17 ¿ÀÈÄ 1:36:01

T

W

S

V

T

AUX IN

LAN

iPod

D

L

COMPO

S

S

3

Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit

O

02 Connections

If you attach a Toroidal ferrite core to the power
cord of the man unit, it will help to prevent RF
interference from radio signals.

Pull the fi xing tab of the Toroidal ferrite core to

1.

UT

FM ANT

HDMI IN

WIRELESS

COMPONENT OUT

SPEAKERS OUT

CENTER FRONT

SURROUND

SUBWOOFER

FRONT

SURROUND

SPEAKER IMPEDANCE : 3

VIDEO OUTAUX IN

open it.
Make a loop twice in the main unit power cord.

2.

Attach the Toroidal ferrite core to the main unit power

3.

cord as the fi gure shows and press it until it clicks.

Connecting External Devices/your TV via HDMI

HDMI is the standard digital interface for connecting to devices such as a TV, projector, DVD player,
Blu-ray player, set top box, and more.

Because HDMI is all digital, you'll enjoy digital quality video and sound as it was originally created,
without the distortions that can be caused when digital content is converted to analogue.

DVD or Blu-ray Player SAT(Satellite/Set top box)

HDMI IN

COMPONENT OUT

NENT OUT

SPEAKERS OUT

VIDEO OUTAUX IN

IDEO OU

PEAKERS OUT

CENTER FRONT

SUBWOOFER

FRONT

SPEAKER IMPEDANCE : 3

PEAKER IMPEDANCE :

SURROUND

SURROUND

IGITA

DIGITAL

LAN iPod HDMI OUT

AUDIO IN

AUDIO IN

OPTICAL

FM ANT

FM AN

HDMI IN

WIRELESS

IRELES

HDMI OUT

English 21

HT-D6500_ELS_0315.indd 21HT-D6500_ELS_0315.indd 21 2011-03-17 ¿ÀÈÄ 1:36:022011-03-17 ¿ÀÈÄ 1:36:02

Connections

R

HDMI OUT :

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your TV.

NOTE

✎

Certain HDMI output resolutions may not work, depending on your TV.




After making the video connection, set the Video input source on your TV to match the
corresponding Video output (HDMI, Component or Composite) on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.



If you have set the product's remote control to operate your TV, press the TV SOURCE button
on the remote control and select HDMI as the external source of the TV.



You must have an HDMI connection to enjoy videos with 3D technology.
A long HDMI cable may cause a screen noise. If this is the case, set Deep Colour to Off in the menu.



HDMI IN :

Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the

1.

HDMI OUT jack on your digital device.
Press the FUNCTION button to select H. IN1 or H. IN2 input.

2.

The mode switches as follows : BD/DVD  D. IN  AUX  R. IPOD  W. IPOD  H. IN1  H. IN2  FM

HDMI Auto Detection Function

If you have connected your home cinema by HDMI cable, the home cinema's video output automatically
switches to the HDMI mode when you turn it on. For available HDMI video resolutions, see page 31.

This function is not available if the HDMI cable does not support CEC.

•

HDMI connection description

•

- HDMI outputs only a pure digital signal to the TV.

- If your TV does not support HDCP, random noise appears on the screen.

What is the HDCP?

•

HDCP (High-band width Digital Content Protection) is a system for preventing BD/DVD content outputted
via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.

Connecting to a TV with an HDMI Cable (BEST QUALITY)

Connecting to an External Component with an HDMI Cable

CAUTION

!

The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of



the product.

Connecting the FM Antenna

FM Antenna (supplied)

FM ANT

WIRWI

Connect the FM antenna supplied to the FM

1.

ANTENNA Jack.
Slowly move the antenna wire around until you

2.

fi nd a location where reception is good, then
fasten it to a wall or other rigid surface.

NOTE

✎

This product does not receive AM broadcasts.



22 English

HT-D6500_ELS_0315.indd 22HT-D6500_ELS_0315.indd 22 2011-03-17 ¿ÀÈÄ 1:36:042011-03-17 ¿ÀÈÄ 1:36:04

T

S

3

Red

Blue

02 Connections

Green

COMPONENT OUT

S

AUX IN

Yellow

VIDEO OUTAUX IN

SPEAKERS OUT

SPEAKERS OU

CENTER FRONT

SUBWOOFER

FRONT

SPEAKER IMPEDANCE : 3

PEAKER IMPEDANCE :

SURROUND

SURROUND

METHOD 1

METHOD 2

METHOD 1 : Component Video (BETTER QUALITY)

If your television is equipped with Component Video inputs, connect a Component video cable (not
supplied) from the Component Video Output (Pr, Pb and Y) Jacks on the back of the product to the
Component Video Input Jacks on your TV.

NOTE

✎

You can select from a variety of resolution settings such as 1080i, 720p, 576p/480p and 576i/480i,



depending on the disc type. (See page 30)



The actual resolution may differ from the setting in the Setup menu if both Component and HDMI cables are
connected. The resolution may also be different depending on the disc. (See page 30)



After making the video connection, set the Video input source on your TV to match the corresponding Video
output (HDMI, Component or Composite) on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.



If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote
control and select COMPONENT as the external source of the TV.



In DVD playback, if both HDMI and Component jacks are connected and you select the Component 1080p,
1080i, 720p or 576p/480p mode, the Display Setup menu will show the output resolution as 1080p, 1080i,
720p or 576p/480p in the menu. The resolution is actually 576i/480i.

METHOD 2 : Composite Video

(GOOD QUALITY)

Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO
IN jack on your TV.

NOTE

✎

The VIDEO source is always output in 576i/480i resolution regardless of the resolution set in the Setup



menu. (See page 30)



After making the video connection, set the Video input source on your TV to match the corresponding
Video output (HDMI, Component or Composite) on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.
If you have set the product's remote control to operate your TV, press the



TV SOURCE

button on

the remote control and select VIDEO as the external source of the TV.

CAUTION

!

Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by



copyright protection systems and the picture will be distorted on the television.

English 23

HT-D6500_ELS_0315.indd 23HT-D6500_ELS_0315.indd 23 2011-03-17 ¿ÀÈÄ 1:36:052011-03-17 ¿ÀÈÄ 1:36:05

Connections

This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.

U

V

U

S

F

T

H

OUT

T

H

N

Connecting Audio from External Components

FM ANT

M AN

COMPONENT OUT

COMPONENT OU

DIGITAL

AUDIO IN

OPTICAL

HDMI OUT

DMI

HDMI IN

DMI I

WIRELESS

WIRELES

AUX IN

IDEO O

VIDEO O

WhiteRed

Optical Cable

(not supplied)

Audio Cable

(not supplied)

If the external analogue

component has only one

Set-Top Box

OPTICAL

Audio Out, connect either

left or right.

VCR

AUX

OPTICAL : Connecting an External Digital Component

Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).

1.

Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital
component.

2.

Press the FUNCTION button to select D.IN input.

•

The mode switches as follows :

NOTE

✎

To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV.



This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.



This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be supported.



BD/DVD  D. IN  AUX  R. IPOD  W. IPOD  H. IN1  H. IN2  FM

AUX : Connecting an External Analogue Component

Analogue signal components such as a VCR.

Connect AUX IN (Audio) on the product to the Audio Out of the external analogue component.

1.

Be sure to match connector colours.

•

Press the FUNCTION button to select AUX input.

2.

The mode switches as follows :

•

NOTE

✎

You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of



BD/DVD  D. IN  AUX  R. IPOD  W. IPOD  H. IN1  H. IN2  FM

the VCR to this product.

24 English

HT-D6500_ELS_0315.indd 24HT-D6500_ELS_0315.indd 24 2011-03-17 ¿ÀÈÄ 1:36:062011-03-17 ¿ÀÈÄ 1:36:06

Connecting to the Network

L

iPod

This product enables you to view network based services (See pages 61~70) such as Smart Hub and
BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend
using an Wireless router or IP router for the connection.
For more information on router connection, refer to the user manual of the router or contact the router
manufacturer for technical assistance.

Cable Network

Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the product to the LAN

1.
terminal of your modem.

Set the network options. (See page 37)

2.

DIGITAL

LAN iPod HDMI OUT

DIGITA

AUDIO IN

AUDIO IN

OPTICAL

HDMI OUT

HDMI IN

02 Connections

Router

Broadband

service

Broadband modem

(with integrated router)

Or

Broadband modem

Broadband

service

Networking with PC for

AllShare function

(See page 70)

NOTE

✎

Internet access to Samsung’s software update server may not be allowed, depending on the router you use or the



ISP’s policy. For more information, contact your ISP (Internet Service Provider).
For DSL users, please use a router to make a network connection.



For the AllShare function, a PC must be connected in the network as shown in the fi gure.



English 25

HT-D6500_ELS_0315.indd 25HT-D6500_ELS_0315.indd 25 2011-03-17 ¿ÀÈÄ 1:36:072011-03-17 ¿ÀÈÄ 1:36:07

Connections

Wireless Network

You can connect to your network with a Wireless IP sharer. A wireless AP/IP router is required to make
a wireless network connection. To set the network confi guration options. see page 37.

Broadband

service

Wireless IP sharer

PC

5V
500mA

ASC IN

Networking with PC for
AllShare function

(See page 70)

NOTE

✎

To use a wireless network, your product must be connected to a wireless IP sharer. If the wireless IP sharer



supports DHCP, your product can use a DHCP (dynamic) or static IP address to connect to the wireless network.



This product supports IEEE 802.11b,g and n. We recommend using IEEE 802.11n. When you play video
over a IEEE 802.11b or g connection, the video may not play smoothly.

Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP



sharer is currently being used by another device nearby, this will result in interference and communication failure.



If you select the Pure High-throughput (Greenfi eld) 802.11n mode and set your AP's Security Encryption type
to WEP, TKIP or TKIPAES (WPS2Mixed), your Samsung home cinema will not support the connection in
compliance with new Wi-Fi certifi cation specifi cations.



If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
Confi guration) or PIN (Personal Identifi cation Number). WPS will automatically confi gure the SSID and WPA
key in either mode.



Connection Methods : You can setup the wireless network connection 3 ways:

- WPS(PBC)

- Auto Setup (Using the Auto Network Search function)

- Manual Setup



Wireless LAN, by its nature, may cause interference, depending on the operating conditions.
(AP performance, distance, obstacles, interference by other radio devices, etc).



Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.



When applying the security key for the AP (wireless IP sharer), only the following security protocols are
supported:

1)

Authentication Mode : WEP, WPAPSK, WPA2PSK

2)

Encryption Type : WEP, AES



To use the AllShare function, you must connect your PC to your network as shown in the fi gure.
The connection can be wired or wireless.

26 English

HT-D6500_ELS_0315.indd 26HT-D6500_ELS_0315.indd 26 2011-03-17 ¿ÀÈÄ 1:36:092011-03-17 ¿ÀÈÄ 1:36:09

Setup

Initial Settings

Turn on your TV after connecting the product.

1.

When you connect and turn on the product to a
TV for the fi rst time, the Initial Settings screen
appears.

Initial Settings | On-Screen Language

Select a language for the on-screen displays.

Български Hrvatski Čeština
Dansk Nederlands English
Eesti Suomi Français
Deutsch
Indonesia Italiano

2.

Press the ▲▼◄► buttons to select the desired
language, and then press the ENTER button.

3.

Press the ENTER button to select Start.

4.

Press the ▲▼ buttons to select the desired TV
Aspect Ratio, and then press the ENTER button.
(See page 30)
Musical Auto Calibration screen will be displayed.

Plug the ASC microphone into the ASC IN jack

5.

on the product. (See page 34)

6.

Press the ENTER button to select Start button.
Setting the Musical Auto Calibration function
takes about 3 minutes.

7.

Press the ▲▼ buttons to select the desired
Network Settings : Wired, Wireless

(General), WPS(PBC) or One Foot
Connection, and then press the ENTER

button. If you do not know the details of your
Network Settings, press the BLUE (D) button
on your remote instead to skip Network
Settings here, fi nish the Initial Settings, and
go to the Home menu.
If you selected a Network Settings, go to
pages 37~40 for more information about the
Network settings. When done, go to Step 8.

8.

The Home menu appears. (For more
information about the Home menu, please
see page 28.)

Ελληνικά Magyar

한국어

m

Move " Enter

•

Home Menu

My Contents

Videos

Photos

Music

My Devices Internet Settings

Function

d WPS(PBC)

NOTE

✎

The Home menu will not appear if you do not



confi gure the initial settings except as noted
below.



If you press the BLUE (D) button during the
Musical Auto Calibration/network setup, you
can access the Home menu even if the
network setup is not completed yet.



If you want to display the Initial Setting screen
again to make changes, select the Reset
option. (See page 41)



If you use an HDMI cable to connect the
product to an Anynet+(HDMI-CEC)­compliant Samsung TV and 1.) You have set
the Anynet+(HDMI-CEC) feature to On in
both the TV and the product and 2.) You have
set the TV to a language supported by the
product, the product will select that language
as the preferred language automatically.

If you leave the product in the stop mode for



more than 5 minutes without using it, a screen
saver will appear on your TV. If the product is
left in the screen saver mode for more than 20
minutes, the power will automatically turn off.

03 Setup

English 27

HT-D6500_ELS_0315.indd 27HT-D6500_ELS_0315.indd 27 2011-03-17 ¿ÀÈÄ 1:36:102011-03-17 ¿ÀÈÄ 1:36:10

Setup

U

U

T

S

INFO

POPU

Accessing the Settings Menu

DISC MENU MENU TITLE MENU

DISC MEN

1

2

1

2

3

4

TOOLS

OOL

RETURN

MENU Button : Press to move to the Home menu.

RETURN Button : Return to the previous menu.

ENTER / DIRECTION Button :

Move the cursor or select an item.
Activate the currently selected item.
Confi rm a setting.

EXIT Button : Press to exit the current menu.

To access the Settings menu and sub-menus,
follow these steps:

1.

Press the POWER button.
The Home Menu appears.

Home Menu

•

TITLE MEN

POPUP

P

INFO

EXIT

3

4

Press the ◄► buttons to select Settings,

2.

and then press the ENTER button.
Press the ▲▼ buttons to select the desired

3.

submenu, and then press the ENTER
button.

Press the ▲▼ buttons to select the desired

4.

item, and then press the ENTER button.
Press the EXIT button to exit the menu.

5.

NOTE

✎

When the product is connected to a network,



select Internet from the Home menu.
Download the desired content from Samsung
Apps. (See pages 68~70)



The access steps may differ depending on the
menu you selected.

The OSD (On Screen Display) may change in



this product after you upgrade the software
version.

My Contents

Videos

1

Function

My Devices Internet Settings

2

Selects My Devices.

1

Selects Function.

2

Selects My Contents.

3

Selects Internet.

4

Selects Settings.

5

Displays the buttons available.

6

Photos

Music

d

WPS(PBC)

3
4

5

6

28 English

HT-D6500_ELS_0315.indd 28HT-D6500_ELS_0315.indd 28 2011-03-17 ¿ÀÈÄ 1:36:132011-03-17 ¿ÀÈÄ 1:36:13

Display

You can confi gure various display options such as
the TV Aspect Ratio, Resolution, etc.

3D Settings

Select whether to play a Blu-ray Disc with 3D
contents in 3D Mode.

Settings

Display

Audio
Network
System
Language
Security
General
Support

3D Blu-ray Playback Mode

3D Blu-ray Discs are available in two formats:
Blu-ray 3D and 3D only. You can choose to
watch a Blu-ray 3D disc in 3D or 2D mode before
playing the disc.

Auto : Automatically detect if a connected TV has

•

3D capability and play a Blu-ray 3D disc in 3D or
2D accordingly or a 3D only disc in 3D if the TV
supports 3D.3D only discs will not be played if
your TV does not support 3D.

3D  3D : Play 3D only and Blu-ray 3D discs in

•

3D mode at all times.
3D  2D : Play Blu-ray 3D discs in 2D mode at all

•

times. 3D only discs will not be played.

NOTE

✎

To stop a movie during 3D playback, press the



STOP

3D mode option is de-activated.
To change a 3D option selection when you are
playing a 3D movie, press the STOP
once. The Blu-ray menu appears. Press the

STOP

Settings in the Blu-ray menu.

3D Settings

3D Settings

3D Blu-ray Playback Mode : Auto
Screen Size :

HDMI Deep Color : Auto

()

button once. The movie stops and the

55

inch

>

Move " Enter ' Return

()

button

() button again, then select 3D

Depending on the content and the position of



the picture on your TV screen, you may see
vertical black bars on the left side, right side, or
both sides.

Screen Size

Lets you enter the actual screen size of your TV so
that the product can adjust the image according to
the screen size and display an optimal 3D image.
(The maximum allowed screen size is 116 inches for
this product.)

CAUTION

!

If you want to enjoy 3D content, connect a



3D device (3D compliant AV receiver or TV)
to the product’s HDMI OUT port using a
high-speed HDMI cable. Put on 3D glasses
before playing the 3D content.



The product outputs 3D signals only through
HDMI cable connected to the HDMI OUT
port.



As the video resolution in 3D play mode is
fi xed according to the resolution of the
original 3D video, you can not change the
resolution to your preference.



Some functions such as BD Wise, screen
size adjustment, and resolution adjustment
may not operate properly in 3D play mode.



Stay at least three times the width of the
screen from the TV when watching 3D
images. For example, if you have a 46 inch
screen, stay 138 inches (3.5 meters) from
the screen.

- Place the 3D video screen at eye level for
the best 3D picture.



When the product is connected to some 3D
devices, the 3D effect may not function
properly.

03 Setup

English 29

HT-D6500_ELS_0315.indd 29HT-D6500_ELS_0315.indd 29 2011-03-17 ¿ÀÈÄ 1:36:152011-03-17 ¿ÀÈÄ 1:36:15

Setup

TV Aspect

Depending on the type of television you have, you
may want to adjust the screen size setting.

16:9 Original : Select when you connect the

•

product to a 16:9 TV screen. The product will
display all content in its original aspect ratio.
Content formatted in 4:3 will be displayed with
black bars on the left and right.

16:9 Full : Select when you connect the product

•

to a 16:9 TV screen. All content will fi ll the full
screen. Content formatted in 4:3 will be stretched.

4:3 Letter Box : Select when you connect the

•

product to a 4:3 TV screen. The product will
display all content in its original aspect ratio.
Content formatted in 16:9 will be displayed with
black bars on the top and bottom.

4:3 Pan-Scan : Select when you connect the

•

product to a 4:3 TV screen. 16:9 content will have
the extreme left and right portions cut off.

NOTE

✎

Depending on the disc type, some aspect ratios



may not be available.



If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
then the picture might appear to be distorted.



If you select the 16:9 Original, your TV may
display 4:3 Pillarbox (black bars on sides of
picture).

Smart Hub Screen Size

Set the Smart Hub Screen to the optimal size.

Size 1 : Smart Hub screen size will be smaller than

•

default. You may see some black on sides of
screen.

Size 2 : This is the default setting for Smart Hub.

•

The product displays the normal Smart Hub
screen size.

Size 3 : This will display a larger Smart Hub screen

•

size. The image may be too large for your TV
screen.

BD Wise (Samsung Products only)

BD Wise is Samsung’s latest inter-connectivity
feature.

When you connect a Samsung product and a
Samsung TV with BD Wise to each other via HDMI,
and BD Wise is on in both the product and TV, the
product outputs video at the video resolution and
frame rate of the BD/DVD disc.

Off : The output resolution stays fi xed at the

•

resolution you set previously in the Resolution
menu, regardless of the resolution of the disc.
See Resolution below.

•

On : The product outputs video at the original
resolution and frame rate of the BD/DVD disc.

NOTE

✎

When BD Wise is on, the Resolution setting



automatically defaults to BD Wise and BD
Wise appears in the Resolution menu.



If the product is connected to a device that
does not support BD Wise, you can not use
the BD Wise function.

For proper operation of BD Wise, set the BD



Wise menu of both the product and the TV to On.

Resolution

Lets you set the output resolution of the
Component and HDMI video signal to Auto,
1080p, 1080i, 720p, 576p/480p, or 576i/480i.
The number indicates the number of lines of
video per frame. The i and p indicate interlaced
and progressive scan, respectively. The more
lines, the higher the quality.

•

Auto : Automatically sets the output resolution
to the connected TV’s maximum resolution.

•

BD Wise : Automatically sets the resolution to
the resolution of the BD/DVD disc if you have
connected the product via HDMI to a TV with
the BD Wise feature. (The BD Wise menu item
appears only if BD Wise is set to On. See BD
Wise above.)

•

1080p : Outputs 1080 lines of progressive

video. (HDMI only)

•

1080i : Outputs 1080 lines of interlaced video.

•

720p : Outputs 720 lines of progressive video.

•

576p/480p : Outputs 576/480 lines of

•

576i/480i : Outputs 576/480 lines of interlaced

progressive video.

video. (VIDEO only)

30 English

HT-D6500_ELS_0315.indd 30HT-D6500_ELS_0315.indd 30 2011-03-17 ¿ÀÈÄ 1:36:162011-03-17 ¿ÀÈÄ 1:36:16