Samsung HM3300 User Manual

Bluetooth

HEADSET

HM3300

Please read this manual before operating your headset, and keep it for future refer ence.
Understand all safety precautions before using your headset to ensure safe and pr oper use.
Graphics used in this manual are for illustration purposes. The actual products may vary.

Safety precautions

•• When using your headset while driving, follow local regulations in the region you are in.

•• Never disassemble or modify your headset for any reason. Doing this may cause t he
headset to malfunction or become combustible. Bring the headset to an authorise d
service centre to repair it.

•• Keep your device and all accessories out of the reach of small children or animals.
Small parts may cause choking or serious injury if swallowed.

•• Avoid exposing your device to very cold or very hot temperatures (below 0 °C o r above 45 °C).
Extreme temperatures can cause the deformation of the device and reduce the
charging capacity and life of your device.

•• Do not allow your device to get wet — liquids can cause serious damage. Do not handle y our
device with wet hands. Water damage to your device can void your manufacturer’ swarranty.

•• Avoid using your device’s light close to the eyes of children or animals.

•• Do not use the device during a thunderstorm. Thunderstorms can cause the de vice
to malfunction and increase the risk of electric shock.

Instructional icons

Before you start, familiarise yourself with the icons you will see in this manual:

Excessive exposure to loud sounds can cause hearing damage. Exposure to
loud sounds while driving may distract your attention and cause an accident.
Use only the minimum volume setting necessary to hear your conversation.

Warning—situations that could cause injury to yourself or others

Note—notes, usage tips, or additional information

Getting started

Turning the headset on or off

To turn the headset on

Slide the Power switch on. The blue indicator light flashes 4 times.

To turn the headset off

Slide the Power switch off. The indicator light flashes blue and red then turns off.

Charging the headset

This headset has a rechargeable internal battery which is non-removable. Ensure t hat you fully
charge the battery before using the headset for the first time.

1 Connect the travel adatper to the charging socket on the headset.
2 Plug the travel adatper in to the wall outlet. During charging, the indicator light will t urn red. If

charging does not begin, unplug the travel adapter and plug it in again.
3 When the headset is fully charged, the red indicator light changes to blue.
Unplug the travel adapter from the wall outlet and the headset.

Turning the headset on for the first time, it will automatically enter pairing mode
for approx. 3 minutes.

Use only Samsung-approved chargers. Unauthorised or Non-Samsung chargers
may cause an explosion or damage to the headset and could invalidate any
warranty on the product.

• Repeatedly charging and discharging of the headset, over time will cause the
battery performance to diminish. This is normal for all rechargeable batteries.

• Never make or receive calls while charging, always disconnect your headset from

Checking the battery level

the charger and answer the call.

To check the battery level, press and hold the Volume down button and the Talk butt on at the
same time. Depending on the battery level, the indicator light flashes 5 times in one of t he
following colors:

Battery level Indicator light color

Above 80% Blue

80 ~20% Violet

Below 20% Red

When the battery power is low

The headset beeps and the indicator light flashes red. If the headset powers of f during a call, the
call will be automatically transferred to the phone.

Wearing the headset

Depending on which ear you are going to wear the headset, simply adjust the ear hoo k
accordingly.

You can also use the optional ear rubbers instead of the ear hook. Remove
the earpiece cover and attach the ear rubber. Then, rotate the ear rubber le ft or
right slightly depending on which ear you are going to wear the headset.

Turning the indicator light on or off

You cannot switch the indicator off while in pairing mode.

The Headset status light is there to show you the current status of your headset, but if it bothers
you at night, you can turn it off.

• Press and hold both Volume buttons simultaneously to t urn the indicator light on or off.

•

• The indicator light will always work when the headset is t urned on or off, when

a call is received, in Pairing mode and when the battery is low.

Using your headset

• Activated functions and features may differ depending on the phone type.

• Some devices, especially those that are not tested or approved by Bluetooth SIG,
may be incompatible with your headset.

To ensure you get the best performance from your headset.

• Keep the distance between your headset and device as small as possible and avoid placing your

body or other objects in the signals path.

• If you usually use your mobile phone with your right hand, wear the headset on your right e ar.

• Covering your headset or device could effect its performance so keep contact to a minimum.

Pairing and connecting the headset

Pairing means unique and encrypted wireless connection between two Bluetooth de vices when
they agree to communicate with each other.

In Pairing mode, two devices should be placed close enough to each other.

Pairing and connecting the headset with a phone

NFC(N ear Field Comm unica tion ) Pairi ng

With NFC-enabled Samsung phone,pairing is simple.

1. Activate the NFC feature on your phone.

• Make sure your phone is unlock mode.

2. With the headset turned on, touch your headset’s front side to the phone’s NFC antenna.

3. Hold the headset to the phone until NFC pairing completes.

Manua l Pairin g

1 Enter Pairing mode. (The blue indicator light stays lit and stays for 3 minutes.)

• With the headset turned on, press and hold the Talk button for 3 seconds.

2 Activate the Bluetooth feature on your phone and search for the headset (see your phone’s user

3 Select the headset (HM3300) from the list of devices found by your phone.

4 If requested, enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the h eadset to your

phone. Once pairing is completed, the headset will attempt to reconnect each time you turn it on.

• Some NFC-enabled devices couldn’t compatible with HM3300.

• For details on NFC, see your phone’s user manual.

manual).

Your headset supports the Simple Pairing feature which allows the headset to be

The Bluetooth phone you want to connect with must n

ot be paired

with other

paired with a Bluetooth device without requesting a PIN. This feature is available

Activ e Pairi ng

With the Active pairing feature, your headset automatically looks for a Bluetooth d evice
within range and tries to make a connection with it.
Make sure the phone’s Bluetooth visibility option is set on.

• In Pairing mode, press and hold the Talk button on the hea dset. The indicator light

color changes to violet from blue. The headset will attempt active paring for up to
20 seconds.

Connecting with two Bluetooth phones

With the Multi-point feature activated, your headset can be connected with two
Bluetooth phones at the same time.

To turn Multi-point feature on

In Pairing mode, press and hold the
Volume up button. The blue indicator
light flashes twice.

1 After connecting with the first Bluetooth phone, enter Pairing mode again.
2 Activate the Bluetooth feature on the second Bluetooth phone and search for t he headset

(see your phone’s user manual).

for devices that are compliant with Bluetooth version 2.1 or higher.

•

devices. If the phone is already connected to another device, end the connection
and restart the Active pairing feature.

• This feature may not be supported on some devices.

To turn Multi-point feature off

In Pairing mode, press and hold the
Volume down button. The red indicator
light flashes twice.