Samsung GH68-07973A User Manual

Page 1

X200.book Page 1 Friday, October 14, 2005 10:31 AM

Depending on the software installed or your service provider or country, some of the descriptions in this guide may not match your phone exactly.

* Depending on your country, your phone and accessories may appear

different from the illustrations in this guide.

World Wide Web http://www.samsungmobile.com

Printed in India

Code No.:GH68-07973A

English. 10/2005. Rev 1.0

Page 2

X200.book Page 2 Friday, October 14, 2005 10:31 AM

SGH-X200 User’s Guide

Page 3

X200.book Page 3 Friday, October 14, 2005 10:31 AM

Important

safety

precautions

Failure to comply with the following precautions may be dangerous or illegal.

Drive safely at all times

Do not use a hand-held phone while driving. Park the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service station) or near fuels or chemicals.

Switch off in an aircraft

Wireless phones can cause interference. Using them in an aircraft is both illegal and dangerous.

Switch off the phone near all medical equipment

Hospitals or health care facilities may be using equipment that could be sensitive to external radio frequency energy . F ollow any regulations or rules in force.

Page 4

X200.book Page 1 Friday, October 14, 2005 10:31 AM

Interference

All wireless phones may be subject to interference, which could affect their performance.

Be aware of special regulations

Meet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.

Water resistance

Your phone is not water -resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on.

Emergency calls

Key in the emergency number for your present location, then press .

Keep your phone away from small children

Keep the phone and all its parts, including accessories, out of the reach of small children.

Accessories and batteries

Use only Samsung-approved accessories and batteries. Use of any unauthorised accessories could damage your phone and may be dangerous.

• The phone could explode if the battery is replaced with an incorrect type.

• Dispose of used batteries according to the manufacturer’s instructions.

Qualified service

Only qualified service personnel may repair your phone.

For more detailed safety information, see "Health and safety information" on page 60.

Important safety precautions

Page 5

X200.book Page 2 Friday, October 14, 2005 10:31 AM

About this Guide

This User’s Guide provides you with condensed information about how to use your phone. To quickly learn the basics for your phone, please refer to “Get started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Indicates that you need to pay careful attention to the subsequent information regarding safety or phone features.

Indicates that you can get more information on the referenced page.

Indicates that you need to press the Navigation keys to scroll to the specified option and then select it.

Indicates a key on the phone. For example, []

Indicates a soft key, whose function is displayed on the phone screen. For example, <



→

[ ]

< >

• Tri-band operation

Use your phone in worldwide GSM networks, in any of 900, 1800, and 1900 bands.

Special

• Simple, compact design with Intenna

Samsung’s powerful intenna technology allows the best call quality without an annoying external antenna.

features of your phone

•IrDA

Send and receive Phonebook data via an infrared port.

Page 6

X200.book Page 3 Friday, October 14, 2005 10:31 AM

• Web browser

Access the wireless web to get current information and up-tothe-minute a wide variety of media content.

•Java

Enjoy Java™-based embedded games and download new games.

• Phonebook

Store home, office, or cellular phone numbers for your entries.

• Multimedia Message Service (MMS)

Send and receive MMS messages with a combination of text, images, and sounds.

• Calendar and to do list

Keep track of your daily and monthly schedules and tasks.

•Alarm

Use your phone as an alarm clock to wake you up in the morning or notify you to an event.

•Calculator

Perform basic calculations and do currency conversions.

• Voice recorder

Record memos or sounds.

Special features of your phone

Page 7

X200.book Page 4 Friday, October 14, 2005 10:31 AM

Contents

Unpack 6

Your phone 6

Buttons, features, and locations

Get started 7

First steps to operating your phone

Install and charge the phone..................................... 7

Power on or off........................................................ 8

Keys and display ..................................................... 9

Access menu functions ............................................ 11

Customise your phone............................................. 12

Make/Answer calls .................................................. 14

Step outside the phone 14

Begin with games, web, messages, and other special features

Play games............................................................ 14

Browse the web...................................................... 15

Use Phonebook....................................................... 16

Send messages...................................................... 16

View messages....................................................... 18

Enter text 19

ABC, T9, Number, and Symbol mode

Call functions 22

Advanced calling features

Menu functions 27

All menu options listed

Solve problems 58

Help and personal needs

Health and safety information 60

Index 67

Page 8

X200.book Page 5 Friday, October 14, 2005 10:31 AM

Overview of menu functions

To access Menu mode, press <

1 SIM AT 2 2 Call records

1 Missed calls 2 Received calls 3 Dialled calls 4 Delete all 5 Call time 6 Call cost

3 Network servicesp. 29

1 Call diverting 2 Call barring 3 Call waiting 4 Network selection 5 Caller ID 6 Closed user group 7 Band selection

> in Idle mode.

p. 27

p. 27 p. 28 p. 28 p. 28 p. 28 p. 28

p. 29 p. 30 p. 30 p. 30 p. 31 p. 31 p. 31

4 Sound settings

1 Ring tone 2 Ring volume 3 Alert type 4 Keypad tone 5 Message tone 6 Alert on call 7 Folder tone 8 Power on/off 9 Extra tones

5 Messages

1 Te xt messages 2 Multimedia

messages

3 Push messages



     

      



p. 32

6 Funbox



p. 32

       



 



1 WAP browser

p. 32

2 Games

p. 32

3 Sounds

p. 32

4 Images

p. 32

5 Delete all

p. 33

6 Memory status

p. 33

7 Organiser

p. 33 p. 33

1 Alarm 2 Calendar

p. 33

3 Time & Date

p. 33

4 Calculator

p. 37

5 To do list 6 Voice memo

p. 41

7 Currency exchange



p. 42

8 Phonebook



p. 42

    



      

1 Search

p. 44

2 New entry

p. 45

3 Group search

p. 45

4 Edit group

p. 45

5 Speed dial

p. 45

6 Delete all 7 Memory status

p. 46

8 SDN*

p. 46

9 Phone settings

p. 46 p. 47

1 Infrared activate

p. 48

2 Display settings

p. 48

3 Greeting message

p. 49

4 Own number

p. 49

5 Language 6 Security 7 Extra settings 8 Short cut 9 Reset settings

*Shows only if supported by your

SIM card.



p. 50



p. 50



p. 50



p. 51



p. 51



p. 51



p. 52



p. 52



p. 52



p. 53



p. 53



p. 54



p. 55



p. 55



p. 55



p. 55



p. 57



p. 57



p. 57

Page 9

X200.book Page 6 Friday, October 14, 2005 10:31 AM

Unpack

Make sure you have each item

Phone

Battery

You can obtain various accessories from your local Samsung dealer.

The items supplied with your phone and the accessories at your Samsung dealer may vary, depending on your country or service provider.

Travel adapter

User’s guide

Your phone

Buttons, features, and locations

Navigation keys (Up/Down/Left/

Right)

Headset jack

Left soft key

Volume keys

Dial key

Alphanumeric

keys

Infrared port

Earpiece

Display

Web access/ Confirm key

Right soft key Power on/off/

Menu exit key

Cancel/Correct key

Special function keys

Microphone

Page 10

X200.book Page 7 Friday, October 14, 2005 10:31 AM

Get started

First steps to operating your phone

SIM card information

When you subscribe to a cellular network, you receive a plug-in SIM (Subscriber Identity Module) card loaded with your subscription details, such as your PIN, and available optional services.

Install and charge the phone

Remove the battery

cover.

If the

phone is already on, first turn it off by holding [ ].

Insert the SIM card.

Make sure that the gold-coloured contacts on the card face down into the phone.

Install the battery. Replace the cover.

Plug the travel adapter

into the phone.

Plug the adapter into

a standard AC wall outlet.

Page 11

X200.book Page 8 Friday, October 14, 2005 10:31 AM

Get started

When the phone is completely charged (the

battery icon becomes still), unplug the adapter from the power outlet.

Power on or off

Power on

1. Open the phone.

Remove the adapter from the phone.

Low battery indicator

When the battery is low:

•a warning tone sounds,

• the battery low message displays, and

• the empty battery icon blinks. If the battery level becomes too low, the phone

automatically turns off. Re c h arge your battery.

Do not turn on the phone when mobile phone use is prohibited.

Power off

2. Press and hold [ ] to turn on the phone.

3. If necessary , enter the PIN and press <OK>.

1. Open the phone.

2. Press and hold [ ].

Page 12

X200.book Page 9 Friday, October 14, 2005 10:31 AM

Keys and display

Keys

Perform the function indicated on the bottom line of the display.

In Idle mode, access your favourite menus directly.



In Menu mode, scroll through menu options.

In Idle mode, launch the web browser. In Menu mode, select the highlighted menu option or confirm input.

Make or answer a call. In Idle mode, retrieve the recent numbers dialled, missed, or received.

Delete characters from the display. In Menu mode, return to the previous menu level.

p. 57

End a call. Press and hold to switch the phone on or off. In Menu mode, cancel input and return the phone to Idle mode.

Enter numbers, letters, and some special characters. In Idle mode, press and hold your voicemail server. Press and hold [ enter an international call prefix.

Enter special characters. In Idle mode, press and hold or deactivate Silent mode. Press and hold

[]

to enter a pause between numbers.

Adjust the phone volume. In Idle mode, adjust the keypad tone volume.

[1]

to access

[]

] to

to activate

Get started

Page 13

X200.book Page 10 Friday, October 14, 2005 10:31 AM

Get started

Display

Layout

Icons

Menu Phonebook

Received signal strength Call in progress Out of your service area; you

cannot send or receive calls

GPRS network Call diverting feature active



p. 29

Icons

display various icons.

Text and graphics

display messages, instructions, and information you enter.

Soft key function indicators

show the current functions assigned to the two soft keys.

Icons

(continued)

IrDA feature activep. 53

Roaming

New text message New voicemail message New multimedia message Active Silent mode or call ringer set

to vibrate Mute mode



p. 13, p. 32



p. 25 Alarm set Battery power level

Page 14

X200.book Page 11 Friday, October 14, 2005 10:31 AM

Access menu functions

Use the soft keys

The roles of the soft keys vary depending on the function you are using. The bottom line of the display indicates their current role.

Menu Phonebook

Press the left soft key to access Menu mode.

Press the right soft key to access the

Phonebook

menu.

Select an option

Use shortcuts

1. Press the appropriate soft key.

2. Press the Navigation keys to move to the next or previous option.

3. Press <

Select

>, <OK>, or [] to confirm the function displayed or option highlighted.

4. To exit, choose either of the following methods:

•Press <> or [C] to move

up one level.

• Press [ ] to return to Idle

mode.

Press the number key corresponding to the option you want.

Get started

Page 15

X200.book Page 12 Friday, October 14, 2005 10:31 AM

Get started

Customise your phone

Display language

Call ringer melody and volume

1. In Idle mode, press < and select

Language

2. Select a language.

1. In Idle mode, press < and select

Ring tone

2. Select a ringtone.

3. Select

4. Adjust the volume level.

5. Press <OK>.

Phone settings

Sound settings

Ring volume

→

Idle mode wallpaper

You can set wallpaper for the idle screen.

1. In Idle mode, press < and select

Display settings Wallpaper →

2. Select the image you want.

3. Press <

Phone settings

Select

→

Wallpaper list

→

Page 16

X200.book Page 13 Friday, October 14, 2005 10:31 AM

Menu shortcuts

Silent mode

You can set the Navigation keys as shortcuts to access your favourite menus.

1. In Idle mode, press < and select

Short cut

2. Select a key.

3. Select a menu to be assign to the key.

You can switch the phone to Silent mode to avoid disturbing other people with your phone sounds.

Press and hold [ ] in Idle mode.

Phone settings

→

Phone lock

You can protect the phone against unauthorised use with a phone password. The phone will require the password on power-up.

1. In Idle mode, press < and select

Security password

2. Enter the default password,

00000000

3. Enter a new 4- to 8-digit password and press <OK>.

4. Enter the new password again and press <OK>.

5. Select

6. Select

7. Enter the password and press <OK>.

Phone settings

→

Change

, and press <OK>.

Phone lock Enable

→

Get started

Page 17

X200.book Page 14 Friday, October 14, 2005 10:31 AM

Make/Answer calls

Make a call

Answer a call

Adjust the volume during a call

1. Enter an area code and phone

2. Press [ ].

3. To end the call, press [ ].

1. When the phone is ringing,

2. To end the call, press [ ].

Press [ / ].

number.

press [ ].

Step outside the phone

Begin with games, web, messages, and other special features

Play games

Launch a game

1. In Idle mode, press < and select

→

a game.

2. Select

3. Select a game mode or press any key to start the game.

Funbox

START GAME

→

Games

Page 18

X200.book Page 15 Friday, October 14, 2005 10:31 AM

Play BubbleSmile

Play Fun2Link

1. Press the Navigation keys to move the selection.

2. Press [1] or [3] to make a horizontal or vertical line of three identical bubbles.

1. Press the Navigation keys to move the selection to the position you want to connect the pipe.

2. Press [ ] to insert a pipe.

3. Repeat until you complete the pipeline.

Browse the web

Using a built-in web browser, you can get easy access to the wireless web to get a variety of up-to-date services and information and to enjoy downloads of web content.

Launch the web browser

Navigate the browser

In Idle mode, press [ ].

• T o scroll through browser items, press [Up] or [Down].

• To select an item, press [ ].

• To return to the previous page, press [C].

• To access browser options, press and hold [ ].

Step outside the phone

Page 19

X200.book Page 16 Friday, October 14, 2005 10:31 AM

Step outside the phone

Use Phonebook

Add an entry

To the phone’s memory:

1. In Idle mode, enter a phone number and press <

2. Select a number type.

3. Select

4. Enter a name and press <OK>.

5. Press <OK> to save the entry.

To the SIM card:

1. In Idle mode, enter a phone

2. Select a number type.

3. Select

4. Enter a name and press <OK>.

5. Press <OK> to save the entry.

Phone

number and press <

SIM

Save

Find an entry

1. In Idle mode, press

2. Select an entry.

3. Scroll to a number and press

Send messages

Send a text message (SMS)

1. In Idle mode, press <

2. Enter the message text.

3. Press <

4. If you selected

5. Enter a destination number and

Phonebook>

[ ] to dial, or press <

Options

and select

messages

Options

Save and send

select a memory location.

press <OK>.

and select

> to access options.

Messages

→

Write new

> and select

Send only

Save and send

Text

Page 20

X200.book Page 17 Friday, October 14, 2005 10:31 AM

Send a multimedia message (MMS)

1. In Idle mode, press < and select

Multimedia messages Write new

2. Enter the message subject press <OK>.

3. Select message contents.

4. When you have finished, press <

Options

5. Select a destination type.

6. Select one of

E-mail address Phonebook

Messages

Add here

> and select

→

and add

Send

Phone number

, or

7. Enter a destination number or address, or select a number from Phonebook and press <OK>.

8. To add other destinations, select

Add destination

repeat from step 6.

9. To add destinations of other types, press < > and repeat from step 5.

10.When you have finished, select

Send message

and

Step outside the phone

Page 21

X200.book Page 18 Friday, October 14, 2005 10:31 AM

Step outside the phone

View messages

View a text message

When a notification appears:

1. Press <

2. Select a message from the

From the Inbox:

1. In Idle mode, press <

2. Select the message.

View

Inbox.

and select

messages

Messages

→

Inbox

→

Text

View a multimedia message

When a notification appears:

1. Press <

2. Press <

3. Select a message from the

From the Inbox:

1. In Idle mode, press <

2. Select the message.

View

Options

Retrieve

Inbox.

and select

Multimedia messages Inbox

> and select

Messages

→

Page 22

X200.book Page 19 Friday, October 14, 2005 10:31 AM

Enter text

ABC, T9, Number, and Symbol mode

You can enter text for some features such as messaging, Phonebook, or Organiser, using ABC mode, T9 mode, Number mode, and Symbol mode.

Changing the text input mode

The text input mode indicator displays when the cursor is in a text field.

Write new

Options

Press the right soft key to change the input mode:

•: ABC mode

• : T9 mode

Text input mode indicator

• : Number mode

•None: Symbol mode

Using ABC mode

Press the appropriate key until the character you want appears on the screen.

Key

space

Characters in order displayed

Upper case Lower case

Page 23

X200.book Page 20 Friday, October 14, 2005 10:31 AM

Enter text

Tips for using ABC mode

• To enter the same letter twice or to enter a different letter on the same key , wait for the cu rsor to move to the right automatically or press [Right]. Then, enter the next letter.

• Press [ ] to insert a space.

• Press [ ] to change case. Initial capital ( ), Capital lock ( ), and Lower case ( ) are available.

• Press the Navigation keys to move the cursor.

•Press [C] to delete characters one by one. Press and hold [C] to clear the display.

Using T9 mode

T9 is a predictive text input mode that allows you to key in any character using single keystrokes.

Entering a word in T9 mode

1. Press [2] to [9] to start entering a word. Press each key once for each letter.

For example, press [4], [3], [5], [5], and [6] to enter Hello in T9 mode.

T9 predicts the word that you are typing, and it may change with each key that you press.

2. Enter the whole word before editing or deleting characters.

3. When the word displays correctly, go to step 4. Otherwise, press [0] to display alternative word choices for the keys that you have pressed.

For example, Of and Me use [6] and [3].

4. Press [ ] to insert a space and enter the next word.

Page 24

X200.book Page 21 Friday, October 14, 2005 10:31 AM

Tips for using T9 mode

•Press [1] to enter periods or apostrophes automatically.

• Press [ ] to change case. Initial capital ( ), Capital lock ( ), and Lower case ( ) are available.

• Press [Left] or [Right] to move the cursor.

•Press [C] to delete characters one by one. Press and hold [C] to clear the display.

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

2. Press [0] to display alternative words for your key presses. When there are no more alternative words,

Add

displays on the bottom line.

3. Press <

4. Enter the word you want using ABC mode and

Add

press <OK>.

Using Number mode

Number mode enables you to enter numbers. Press the keys corresponding to the digits you want.

Using Symbol mode

Symbol mode enables you to insert symbols.

To Press

display more symbols [Up] or [Down]. select a symbol the corresponding

number key. clear the symbol(s) [C]. insert the symbol(s) <OK>.

Enter text

Page 25

X200.book Page 22 Friday, October 14, 2005 10:31 AM

Call functions

Advanced calling features

Making a call

1. In Idle mode, enter the area code and phone number.

2. Press [ ].

• Press [C] to clear the last digit or press and hold [C] to clear the whole display. You can move the cursor to edit an incorrect digit.

• Press and hold [ ] to enter a pause between numbers.

Making an international call

1. In Idle mode, press and hold [0]. The + character appears.

2. Enter the country code, area code, and phone number, then press [ ].

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of recent numbers.

2. Scroll to the number you want and press [ ].

Making a call from Phonebook

Once you have stored a number in Phonebook, you can dial the number by selecting it from Phonebook.p. 50

You can also use the speed dial feature to assign your most frequently called numbers to specific number keys.p. 51

Dialling a number from the phone’s memory

1. In Idle mode, press and hold [0]. A + appears.

2. Enter the location number for the phone number you want and press [ ].

3. Press [Up] or [Down] to scroll through other numbers.

4. Press <

Dial

> or [ ] to dial the number you want.

Page 26

X200.book Page 23 Friday, October 14, 2005 10:31 AM

Dialling a number from the SIM card

1. In Idle mode, enter the location number for the phone number you want and press [ ].

2. Press [Up] or [Down] to scroll through other numbers.

3. Press <

Dial

> or [ ] to dial the number you want.

Ending a call

Close the phone or press [ ].

Answering a call

When you receive an incoming call, the phone rings and displays the incoming call image.

Press <

> or [ ] to answer the call.

Tips for answering a call

• When

Anykey answer

any key to answer a call, except for < [].p. 57

is active, you can press

Reject

> or

• When

•Press <

Active folder

the phone.p. 57

Reject

> or [ ] to reject a call.

is active, you can simply open

Viewing missed calls

If you have missed calls, the screen displays how many calls you have missed.

1. Press <

2. If necessary, scroll through the missed calls.

3. Press [ ] to dial the number you want.

View

Using the headset

Use the headset to make or answer calls without holding the phone.

Connect the headset to the jack on the left side of the phone.

Call functions

Page 27

X200.book Page 24 Friday, October 14, 2005 10:31 AM

Call functions

The button on the headset works as listed below:

To Press

redial the last call the button twice. answer a call the button. end a call the button.

Options during a call

You can access a number of functions during a call.

Adjusting the volume during a call

Use [ / ] to adjust the earpiece volume during a call. Press [ ] to increase the volume level and [ ] to

decrease the volume level.

Placing a call on hold/Retrieving

Press <

Hold

> or <

Unhold

or retrieve the call.

> to place the call on hold

Making a second call

You can make another call if your network supports it.

1. Press <

2. Make the second call in the normal way.

3. Press <

4. Press <

5. To end the current call, press [ ].

Hold

> to put the call on hold.

Swap

> to switch between the calls.

Options

the call on hold.

> and select

End held call

to end

Answering a second call

You can answer an incoming call, if your network supports it and you have activated the call waiting feature.p. 30

1. Press [ ] to answer the call. The first call is automatically put on hold.

2. Press <

3. Press <

4. To end the current call, press [ ].

Swap

> to switch between the calls.

Options

the call on hold.

> and select

End held call

to end

Page 28

X200.book Page 25 Friday, October 14, 2005 10:31 AM

Using the Speakerphone feature

Use your phone as a speaker phone to talk and listen with the phone a short distance away.

Press <

Options

> and select

Speaker ON/Normal

Transferring a call

You can transfer the currently activ e call to a caller on hold, if your network supports it. With this option, the two callers can talk to each other, but you are disconnected from the call.

Press <

Options

> and select

Transfer

Using the menu functions

Press <

Options

Switching off the microphone

You can temporarily switch off your phone’s microphone so that the other person on the phone cannot hear you.

Press <

Options

> and select

Mute

(

Mute mode

Unmute

)

Muting or sending key tones

You can turn the key tones off or on. Press <

Options

keys

To communicate with answering machines or computerised telephone systems, be selected.

> and select

Mute keys

Send keys

Send

must

Sending a sequence of DTMF tones

Dual tone multi-frequency (DTMF) tones are the tones used in phones for tone dialling.

You can send DTMF tones as a group after entering the entire number you need to send or retrieving a number from Phonebook. This feature is helpful for entering a password or an account number when you call an automated system, like a banking service.

1. When connected with a teleservice system, press <

Options

2. Enter the number you need to send and press <OK>.

> and select

Send DTMF

Call functions

Page 29

X200.book Page 26 Friday, October 14, 2005 10:31 AM

Call functions

Using Phonebook

You can access the store entries.p. 50

Press <

Options

Phonebook

> and select

menu to locate or

Phonebook

Making a multi-party call

Use this feature to allow as many as six people to join a multi-party call, or conference call.

Your service provider must support multi-party calls for you to use this feature.

Setting up a multi-party call

1. Call the first participant.

2. Call the second participant. The first call is automatically put on hold.

3. Press <

4. If desired, call another person or answer an

5. Press <

6. Repeat steps 4 and 5 as desired.

Options

participant is added to the multi-party call.

incoming call.

Options

> and select

Join

. The first

Having a private conversation with one participant

1. Press <

2. Select a name or number from the participant list.

3. Select

4. T o return to the multi-party call, press <

Options

Private

You can talk privately with that person, while the other participants converse with each other.

and select

> and select

Join

Select one

Options

Disconnecting one participant

1. Press <

2. Select a name or number from the participant list.

3. Select

4. Press [ ] to end the multi-party call.

Options

Remove

The participant is dropped from the call, but the call continues with the other parties.

> and select

Select one

Page 30

X200.book Page 27 Friday, October 14, 2005 10:31 AM

Menu functions

All menu options listed

SIM AT

This menu is available if you use a SIM AT card that provides additional services, such as news, weather, sports, entertainment, and location services. Available services may vary, depending on your service provider’s plans.

For details, see your SIM card instructions or contact your service provider.

To access this menu, press < select

(Menu 1)

SIM AT

> in Idle mode and

Call records

Use this menu to view the calls you have dialled, received, or missed, the length of your calls, and the cost of your calls.

To access this menu, press < select

Call records

Missed calls

This menu displays the most recently received calls that you did not answer.

(Menu 2)

(Menu 2.1)

> in Idle mode and

Accessing a call record

1. Select a call record.

2. Press [Up] or [Down] to move to another call record.

3. Press [ ] to dial or, < record options.

Options

> to access call

Page 31

X200.book Page 28 Friday, October 14, 2005 10:31 AM

Menu functions

Using call record options

While viewing call details, press < the following options:

•

Edit

: change the number of the selected call

record.

•

Delete

: delete the selected call record.

Received calls

This menu displays the most recent calls you have received.

Dialled calls

This menu displays the most recent calls you have dialled.

Delete all

Use this menu to delete all of the records in each call type.

1. Press [ ] to select the call types to be cleared.

2. Press <

3. Press <

(Menu 2.2)

(Menu 2.3)

(Menu 2.4)

Delete Yes

> twice to confirm the deletion.

Options

> to access

Call time

This menu displays the time log for calls made and received. The actual time invoiced by your service provider will vary.

•

Call cost

This network feature displays the cost of calls. This menu is available only if your SIM card supports this feature. Note that this is not intended to be used for billing purposes.

•

(Menu 2.5)

Last call time Total sent

you have dialled.

Total received

calls you have received.

Reset timers

enter the phone password.

The password is preset to change this password.p. 56

(Menu 2.6)

Last call cost

: check the length of your last call.

: check the total length of all the calls

: check the total length of all the

: reset the call timers. You need to

: check the cost of your last call.

00000000

. You can

Page 32

X200.book Page 29 Friday, October 14, 2005 10:31 AM

•

Total cost

If the total cost exceeds the maximum cost set in

Set max cost

you can make another call.

•

Max cost Set max cost

•

Reset counters

•

Set max cost

for your calls.

•

Price/Unit

when the cost of your calls is calculated.

Network services

Use this menu to access network services. Please contact your service provider to check their availability and subscribe to them, if you wish.

To access this menu, press < select

: check the total cost of all of your calls.

, you must reset the counter before

: check the maximum cost limit set in

: reset the cost counters.

: set the maximum cost authorised

: set the price per unit that is applied

(Menu 3)

Network services

> in Idle mode and

Call diverting

This network service reroutes incoming calls to a phone number that you specify.

1. Select a call diverting option:

•

Divert always

•

Busy

call.

•No

the phone.

•

Unreachable

an area covered by your service provider or when your phone is switched off.

•

Cancel all

2. Select the type of calls to be diverted.

3. To activate call diverting, press < Otherwise, press <

4. Enter the number to which calls are to be diverted and press <OK>.

(Menu 3.1)

: divert calls when you are on another

: divert all calls.

: divert calls when you do not answer

: divert calls when you are not in

: cancel all call diverting options.

Options

Activate

> and select

Remove

Menu functions

Network services

Page 33

X200.book Page 30 Friday, October 14, 2005 10:31 AM

Menu functions

5. If you selected the network delays before diverting a call and press <

Call barring

This network service allows you to restrict your calls.

1. Select a call barring option:

•

All outgoing

•

International

•

International except home

to numbers within the current country when you are abroad, and to your home country.

•

All incoming

•

Incoming while abroad

calls when you use your phone outside of your home country .

•

Cancel all

allowing calls to be sent and received normally.

•

Change barring password

barring password obtained from your service provider.

No reply

Select

(Menu 3.2)

: cancel all call barring settings,

, select the length of time

: prohibit all outgoing calls.

: prohibit international calls.

: prohibit incoming calls.

: prohibit incoming

: change the call

: only allow calls

2. Select the type of calls to be barred.

3. Press <

4. Enter the call barring password supplied by your

Call waiting

This network service informs you when someone is trying to reach you while you are on another call.

1. Select the type of calls to which the call waiting

2. Press <

Network selection

This network service allows you to either automatically or manually select the network used when roaming outside of your home area.

You can select a network other than your home network only if there is a valid roaming agreement between the two.

Activate

press <

Deactivate

service provider and press <OK>.

option will apply.

Activate

press <

Deactivate

>. To deactivate call barring,

(Menu 3.3)

>. To deactivate call waiting,

(Menu 3.4)

Page 34

X200.book Page 31 Friday, October 14, 2005 10:31 AM

•

Automatic

: connect to the first available network

when roaming.

•

Manual

: select the network you want.

Caller ID

(Menu 3.5)

This network service allows you to prevent your phone number from being displayed on the phone of the person being called. However, some networks do not allow the user to change this setting.

•

Default

: use the default setting provided by the

network.

•

Hide number

: ensure your number does not

display on the other person’s phone.

•

Send number

: send your number each time you

make a call.

Closed user group

(Menu 3.6)

Use this menu to set incoming and outgoing calls to be restricted to a selected user group. For details about how to create a closed user group, contact your service provider.

•

Index list

numbers. Press <

: list, add, or delete CUG index

Options

> to access the options

for setting up an index list.

•

Outside access

: enable calls to numbers other than those in the Closed user group. This feature depends on the nature of your CUG subscription.

•

Default group

: enable the default CUG, if you have set one with your service provider. When making a call, you are given the option of using your default CUG, instead of selecting one from the list.

Band selection

(Menu 3.7)

For the phone to make and receive phone calls, it must register with an available network. Your phone can handle any of the following types of networks: GSM 1900 and Combined GSM 900/1800.

The country where you purchased your phone determines the default band that it uses. When you travel abroad, you must remember to change to an appropriate band.

Menu functions

Network services

Page 35

X200.book Page 32 Friday, October 14, 2005 10:31 AM

Menu functions

Sound settings

Use this menu to customise various sound settings. To access this menu, press <

select

Sound settings

Ring tone

Use this menu to select a ringtone for the call ringer. You can select one of the default ring melodies or downloaded sounds.

Ring volume

Use this menu to adjust the ringtone volume.

Alert type

Use this menu to specify how you are to be informed of incoming calls.

•

Light only

neither rings nor vibrates.

•

Melody

ringtone.

•

Vibration

(Menu 4.1)

(Menu 4.3)

: the phone rings using the selected

: the phone vibrates but not rings.

(Menu 4)

(Menu 4.2)

: the service light flashes; the phone

> in Idle mode and

•

Vibra+melody

and then starts ringing.

Keypad tone

Use this menu to select the tone that the phone sounds when you press a key.

You can adjust the keypad tone volum e using in Idle mode.

Message tone

Use this menu to change the sound settings for incoming SMS messages, MMS messages, and CB messages individually.

•

SMS tone

SMS messages.

•

SMS-CB tone

new cell broadcast (CB) messages.

•

MMS tone

MMS messages.

•

Repetition

of new messages.

: the phone vibrates three times

(Menu 4.4)

[/]

(Menu 4.5)

: specify how you are informed of new

: specify how you are informed of

: specify how you are informed of new

: set how often the phone informs you

Page 36

X200.book Page 33 Friday, October 14, 2005 10:31 AM

Alert on call

Use this menu to select whether or not the phone informs you when you receive a new message or when the time for an alarm comes during a call.

Folder tone

Use this menu to select the tone that the phone sounds when you open or close the phone.

Power on/off

Use this menu to select the melody that the phone plays when it is switched on or off.

Extra tones

Use this menu to customise additional tones for the phone.

•

Error tone

a mistake.

•

Minute minder

minute during an outgoing call to keep you informed of the length of your call.

(Menu 4.6)

(Menu 4.7)

(Menu 4.8)

(Menu 4.9)

: set the phone to beep when you make

: set the phone to beep every

•

Connect tone

outgoing call is connected to the system.

Messages

Use the

Messages

messages, and multimedia messages. You can also use push message, voicemail, and cell broadcast message features.

To access this menu, press < select

Messages

Text messages

Short Message Service (SMS) allows you to send or receive text messages including simple pictures, melodies, and animated images.

: set the phone to beep when an

(Menu 5)

menu to send and receive short

(Menu 5.1)

> in Idle mode and

Menu functions

Messages

(Menu 5)

Page 37

X200.book Page 34 Friday, October 14, 2005 10:31 AM

Menu functions

Inbox

(Menu 5.1.1)

Use this menu to view received text messages. While viewing a message, press <

the following options:

•

Delete

: delete the message.

•

Send

: forward the message to other people.

•

Text reply

•

Call back

•

Cut address

phone numbers from the message.

•

Move to phone

card to the phone’s memory.

•

Move to SIM

phone’s memory to the SIM card.

•

Select objects

message into your phone.

: reply to the sender.

: call the sender.

: extract URLs, e-mail addresses, or

: move the message from the SIM

: move the message from the

: save images or sounds from the

Options

> to access

Outbox

Use this menu to view sent or saved text messages. While viewing a message, press <

the following options:

•

(Menu 5.1.2)

Delete

: delete the message.

Send

: forward the message to other people.

Cut address

phone numbers from the message.

Move to phone

card to the phone’s memory.

Move to SIM

phone’s memory to the SIM card.

Select objects

message into your phone.

: extract URLs, e-mail addresses, or

: move the message from the SIM

: move the message from the

: save images or sounds from the

Options

> to access

Page 38

X200.book Page 35 Friday, October 14, 2005 10:31 AM

Write new

(Menu 5.1.3)

Use this menu to create and send text messages.

1. Enter your message. The maximum number of characters allowed in

a short message varies by service provider. If your message exceeds the maximum number of characters, the phone will split the message.

2. Press <

•

Add objects

Options

> to access the following options:

: add a sound, melody , picture, or

animated image to the message.

•

Add templates

•

Add emoticon

•

Add phonebook

•

Add bookmark

3. Press <

Options

and send

4. If you select

: retrieve a text template.

: retrieve an emoticon.

: add a Phonebook entry.

: add a web page’s address.

> and select

Save only

Save and send

Send only, Save

Save only

, select

a memory location.

5. Enter a destination number.

6. Press <OK> to send the message.

Templates

(Menu 5.1.4)

Use this menu to create SMS templates with the sentences you use frequently so that you can retrieve and insert them when composing an SMS message.

While viewing the templates list, press <

Options

> to

access the following options:

•

Edit

: edit the template.

•

Send message

: send the template as an SMS

message.

•

Delete

: delete the template.

Emoticon templates

(Menu 5.1.5)

Your phone provides preset emoticons so that you can use when writing a message. Use this menu to create or edit emoticons.

While viewing the emoticon list, press <

Options

> to

access the following options:

•

Add

: add a new emoticon.

•

Edit

: edit the selected emoticon.

•

Send

: send a message using the emoticon.

•

Delete

: delete the emoticon.

Menu functions

Messages

(Menu 5)

Page 39

X200.book Page 36 Friday, October 14, 2005 10:31 AM

Menu functions

Settings

Use this menu to customise the SMS settings.

•

(Menu 5.1.6)

The setting options available in this menu may v ary depending on your service provider.

Setting x

each group has its own submenu.

Service centre

your message centre.

Default destination

number.

Default type Default validity

messages are stored in the SMS server.

Setting name

group.

Common setting

available:

Reply path

through your message centre.

(where x is the setting group number):

: store or changes the number of

: store a default destination

: set the default message type.

: set the length of time your

: change the name of the setting

: the following options are

: allow the recipient to reply to you

Delivery reports

when your message has been delivered.

Bearer selection preferred

Delete all

Use this menu to delete all of SMS messages in each message box.

1. Press [ ] to select the message boxes to be

2. Press <

3. Press <

(Menu 5.1.7)

cleared.

Delete Yes

Memory status

Use this menu to check the number of SMS messages you have stored and total number of SMS messages you can store in each memory type.

: set the network to inform you

: select the

bearer type.

> twice to confirm the deletion.

(Menu 5.1.8)

GSM

GPRS

Page 40

X200.book Page 37 Friday, October 14, 2005 10:31 AM

Voice mail

(Menu 5.1.9)

Use this menu to store the number of the voicemail server and access your voicemails.

You must enter the voice serv er number before you can access your voicemails. Yo ur service provider can give the voice server number.

•

Connect to voice server

: connect to the voice server to allow you to listen to your messages. You can also connect to the voicemail server by pressing and holding [1] in Idle mode.

•

Voice server number

: change the voicemail

server number.

Broadcast

(Menu 5.1.0)

The Cell Broadcast service delivers short messages on various topics such as the weather or traffic.

Use this menu to change the settings for the service and access broadcast messages.

•

Read

: open received messages.

The

Volatile

box saves network messages until

the phone is switched off.

The

Archive

box.

: select to receive broadcast messages, or

not.

•

Channel list

: specify the channels from which you

receive broadcast messages.

•

Language

: select the preferred languages in

which broadcast messages display.

Please contact your service provider for details.

Multimedia messages

(Menu 5.2)

Multimedia Message Service (MMS) delivers messages containing a combination of text, picture, and sound, from phone to phone or from phone to e-mail.

Inbox

(Menu 5.2.1)

This menu displays MMS messages that you have received. The following icons tell you the message status:

Menu functions

Messages

(Menu 5)

Page 41

X200.book Page 38 Friday, October 14, 2005 10:31 AM

Menu functions

• Unread notification

• Read notification

• Retrieving from the server

• Processing your request

• Failed to send

• Read

• Unread While viewing a message, press <

the following message options:

•

Delete

: delete the message.

•

: reply to the sender.

•

Callback

•

Cut address

phone numbers from the message.

•

Forward

•

Save picture

into the

•

Save sound

the

: call the sender.

: extract URLs, e-mail addresses, or

: forward the message to other people.

: save an image from the message

Images

folder.

Sounds

: save a sound from the message into

folder.

Options

> to access

•

Properties

When you select a notification, you can access

Retrieve

server.

Outbox

This menu displays MMS messages that you have sent. The following icons tell you the message status:

• Being sent

• Sent

• Failed to send

• To be sent While viewing a message, press <

the following options:

•

Delete

•

Cut address

phone numbers from the message.

•

Send

•

Edit message

•

Properties

: access the message properties.

to retrieve the message from the MMS

(Menu 5.2.2)

Options

: delete the message.

: extract URLs, e-mail addresses, or

: send or resend the message.

: edit the message.

: access the message properties.

> to access

Page 42

X200.book Page 39 Friday, October 14, 2005 10:31 AM

Draft

(Menu 5.2.3)

After creating a multimedia message, you can store it in this message box for sending later.

You can view a message and use the options the same as in

Outbox

Write new

(Menu 5.2.4)

You can create and send an MMS message.

1. Enter the message subject and press <OK>.

2. Press <

Options

> and add message contents using

one of the following options:

•

Add text

•

Add picture

•

Add sound

•

Save Templates

•

Settings

•

Add destination

: add message text.

: add a picture to the message.

: add a sound clip to the message.

: save the message in the

Draft

box.

: change the message settings.

: enter destination numbers

or addresses.

•

Preview

: view the message you created.

The maximum size allowed for a message can differ, depending on your service provider.

3. If you want to change the added items, highlight one and press <

Options

> to access the following

options:

•

Edit text/Edit picture/Edit sound

: edit the

text, picture, or sound.

•

Add page

: add pages. Move to each page by pressing [Left] or [Right] on the message screen.

•

Delete

•

: delete the item from your message.

Duration

: set how long one page displays. After the specified time, the display automatically scrolls to the next page.

4. When you have finished, select

Send

from the

options.

5. Select a destination type (To, Cc, Bcc).

6. Select one of

Phonebook

Phone number, E-mail address

, or

Menu functions

Messages

(Menu 5)

Page 43

X200.book Page 40 Friday, October 14, 2005 10:31 AM

Menu functions

7. Enter a phone number or an e-mail address, or select a number from Phonebook and press <OK>.

8. T o add more destinations, select and repeat from step 6.

9. To enter additional numbers or addresses to other destination types, press < >and repeat from step

10.When you have finished, select

Templates

Use this menu to store MMS messages you saved as templates so that you can use them to create new messages.

While viewing a message template, press <OK> to access the following options:

•

Edit message

template.

•

Delete

Delete all

Use this menu to delete all of MMS messages in each message box.

(Menu 5.2.5)

: send the message using the

: delete the template.

(Menu 5.2.6)

Add destination

Send message

1. Press [ ] to select the message boxes to be cleared.

2. Press <

3. Press <

Memory status

Use this menu to view the amount of memory

available for MMS messages and memory currently in use in each message box.

Setup

You can customise the settings for sending and receiving MMS messages.

•

Delete

Yes

> twice to confirm the deletion.

(Menu 5.2.7)

(Menu 5.2.8)

Delivery report

when your message has been delivered.

Read reply Auto download

retrieves new incoming messages from the MMS server without notifications.

Message acceptance

messages you want to receive.

: set the network to inform you

: request a reply from the recipient.

: set whether or not your phone

: select the category of

Page 44

X200.book Page 41 Friday, October 14, 2005 10:31 AM

•

Hide ID

: hide your phone number on the

recipient’s phone.

•

Expiry date

: set the length of time your messages

are stored in the message centre.

•

Delivery time

: set the time delay before

messages are sent.

•

Priority

•

Report allowed

: set the priority level of your messages.

: send a delivery report from the

network to the sender.

•

Page duration

: set how long one page in your outgoing messages displays. After a specified time, the display automatically scrolls to the next page.

MMS profile

(Menu 5.2.9)

You can configure required network settings for MMS. The last profile accessed is automatically activated for sending or receiving subsequent messages.

Check with your service provider before you change any MMS settings on your phone.

•

Profile name

: assign a name to the MMS profile.

•

Connection URL

: enter the address of your MMS

server.

•

Security

•

IP address

•

User name

•

Password

•

APN

: select a data transmission mode.

: enter the gateway address. : enter the user ID.

: enter the password.

: enter the access point name used for the

address of the MMS server.

Push messages

(Menu 5.3)

Use this menu to access messages from the web server.

•

Inbox

: view push messages you have received.

•

Receive

: determine whether or not your phone

receives push messages.

Never

: the phone rejects push messages.

Always

: the phone receives all push messages.

•

Delete all

: delete all push messages.

Menu functions

Messages

(Menu 5)

Page 45

X200.book Page 42 Friday, October 14, 2005 10:31 AM

Menu functions

Funbox

The play Java games, and access images and sounds stored in the phone’s memory.

To access this menu, press < select

WAP browser

The Wireless Application Protocol (WAP) browser on your phone allows you to access the wireless web.

From the wireless web, you can access up-to-date information and a wide variety of media content, such as games, wallpapers, and ringtones.

Home

Use this menu to connect your phone to the network and load the homepage of the wireless web service provider. You can also press [ ] in Idle mode.

(Menu 6)

Funbox

menu allows you to use the web browser,

Funbox

(Menu 6.1.1)

(Menu 6.1)

> in Idle mode and

Navigating with the web browser

To Press

scroll through browser items [Up] or [Down]. select a browser item [ ]. return to the previous page [C].

Using page options

From any web page, press and hold [ ] to access the following options:

•

Reload

: reload the current page with updated

information.

•

Home

: return to the homepage.

•

Go to URL

•

Show URL

web page.

•

Edit home

homepage.

•

Clear cache

cache.

: enter a URL address manually. : view the URL address of the current

: change the page to be used for your

: delete information stored in the

Page 46

X200.book Page 43 Friday, October 14, 2005 10:31 AM

•

Inbox

: read messages received from a web

server.

Exiting the web browser

Press [ ] to exit the browser.

Favorite

(Menu 6.1.2)

Use this menu to save URL addresses in order to quickly access web pages.

Adding a bookmark

1. Select an empty location.

2. Enter a URL address and press <

3. Enter a title for the bookmark and press <

Enter

Accessing a bookmarked page

Selecting a bookmark item launches the web browser and accesses the associated web page.

Using bookmark options

After saving an item, press <

Options

> to access the

following options:

•Go

to URL

: access the website.

•

Edit

: edit the URL address and title of the

bookmark.

•

Delete

: delete the bookmark.

http://

(Menu 6.1.3)

Use this menu to manually enter a URL address and access the associated web page.

Settings

(Menu 6.1.4)

Use this menu to set up servers for the web browser. Contact your service provider for details about your settings options.

For each server, the following options are available:

•

Profile name

•

Homepage URL

: assign a name to the server profile.

: set the address of your

homepage.

•

Security

•

Bearer

address accessed;

When the bearer is set to

•

IP address

: select a data transmission mode.

: select a bearer for each type of network

GPRS

Data

GPRS

: enter the web gateway address.

Menu functions

Funbox

(Menu 6)

Page 47

X200.book Page 44 Friday, October 14, 2005 10:31 AM

Menu functions

•

User name

•

Password

•

APN

network gateway.

When the bearer is set to

•

IP address

•

Password

•

Dial-up number

number.

•

Data call type

Clear cache

Use this menu to clear the cache, which is the temporary memory that stores the web pages you have recently accessed.

: enter the user ID.

: enter the password.

: enter the access point name of the GPRS

Data

: enter the web gateway address.

: enter the user ID.

: enter the password.

: enter the PPP server phone

: select a data call type.

(Menu 6.1.5)

Games

You can download Java applications from various sources using the web browser , and store them in y our phone.

(Menu 6.2)

Java services may not available, depending on your service provider.

Launching a game

1. Select the game you want on the Games list.

2. On the startup screen of the game, you can access the following options:

•

START GAME

•

CONTINUE

played.

•

HIGH SCORE

option may not be available for some games.

•

HOW TO PLAY

and the key functions for the game.

•

OPTION

3. Press [ ] to confirm your selection.

: start a new game.

: continue the last game you

: view the high score table. This

: view how to play the game

: switch on or off the game sound.

Page 48

X200.book Page 45 Friday, October 14, 2005 10:31 AM

Viewing game information

Scroll to the game you want and press <

Info

Changing the DNS settings

You may need to change the DNS setting of the Java server at your service provider’s instructions.

1. Select

2. Enter the primary DNS address and press <OK>.

3. Enter the secondary DNS address and press

Sounds

This menu displays sounds downloaded from the wireless web or received in messages.

While accessing a sound, press < the following options:

•

Setting

on the Games list.

<OK>.

(Menu 6.3)

Rename Delete Set as ring tone

: change the sound name.

: delete the sound.

Options

: set the sound as your ringtone.

> to access

Images

This menu displays images downloaded from the wireless web or received in messages.

While accessing an image, press < the following options:

•

Delete all

Use this menu to delete all of the downloaded items in the

1. Press [ ] to select the folders to be cleared.

2. Press <

3. Press <

Memory status

Use this menu to check the total amount of memory for media items and the amount of memory currently in use in each media box.

(Menu 6.4)

Rename Delete Set as wallpaper

wallpaper for the idle screen.

Games, Sounds

: change the image name.

: delete the image.

: set the image as your

(Menu 6.5)

, and

Images

Delete

Yes

> twice to confirm the deletion.

(Menu 6.6)

Options

folders.

> to access

Menu functions

Funbox

(Menu 6)

Page 49

X200.book Page 46 Friday, October 14, 2005 10:31 AM

Menu functions

Organiser

The Organiser feature enables you to keep track of your schedule and tasks, and to record voice memos. You can also set the time and date and use convenient features, such as an alarm clock, a calculator, and a currency converter.

To access this menu, press < select

Organiser

Alarm

Use this menu to set alarms to ring at a specific time.

Setting an alarm

1. Select the type of alarm.

2. Enter the time for the alarm to sound and press [].

3. Select AM or PM in 12-hour time format.

4. If you selected

Monday to friday

(Menu 7)

(Menu 7.1)

Morning call

Monday to saturday

> in Idle mode and

in step 1, choose

Stopping an alarm

• When the alarm sounds, press any key.

• To remove an alarm set, access it, press <

Options

• To remove all alarm sets, select from the Alarm screen.

> and select

Remove alarm

Setting the alarm to ring even if the phone is off

From the Alarm screen, select If the phone is off when it is time for the alarm to ring,

the phone switches on and sounds the alarm.

Calendar

Use this menu to consult the calendar, write memos, or set alarms to act as a reminder.

(Menu 7.2)

Autopower

→

Enable

Writing a memo

1. Select a date on the calendar.

2. Enter your memo and press <OK>.

Page 50

X200.book Page 47 Friday, October 14, 2005 10:31 AM

3. Press [ ] to set an alarm to ring on the chosen day.

Otherwise, press <

Skip

4. Enter the time for the alarm and press [ ]. To select an alarm melody, press <

Melody

5. Select AM or PM in 12-hour format. The colour of the date on the calendar changes to

pink to indicate that a memo exists for that date.

Viewing a memo

1. Select a date which has memos from the calendar.

2. Press [Up] or [Down] to view other memos scheduled for that day.

Using calendar memo options

On the calendar screen, press <

Options

> to access

the following options:

•

Search all

•

Delete all

•

Go to date

•

Exit

: view all of the memos you created.

: delete all memos.

: go to a specific date.

: exit the

Calendar

menu.

While viewing a memo, press <

Options

> to access

the following options:

•

New

: add a new memo.

•

Edit

: edit the memo.

•

Alarm

: set an alarm for the memo.

•

Delete

: delete the memo.

•

Copy to

: copy the memo to another date.

•

Move to

Time & Date

: change the date of the memo.

(Menu 7.3)

Use this menu to change the time and date displayed on your phone. Before setting the time and date, specify your time zone in

•

Set time

•

Set date

•

World time

: enter the current time. : enter the current date.

: set your local time zone and find out

World time

what time it is in another part of the world.

•

Time format

: select 12-hour or 24-hour time

format.

Menu functions

Organiser

(Menu 7)

Page 51

X200.book Page 48 Friday, October 14, 2005 10:31 AM

Menu functions

Calculator

Use this menu to perform basic arithmetic functions such as addition, subtraction, multiplication, and division.

1. Enter the first number.

• Press <

•

2. Press the Navigation keys to access the math function you want.

3. Enter the second number.

4. Press [ ] to view the result.

5. If necessary, repeat from step 2 to continue the calculation.

To do list

Use this menu to create tasks and manage them.

Creating a task

1. Press <

2. Enter the first task and press <OK>.

3. Select a priority level.

(Menu 7.4)

.()

bracket. Press [] or [ ] to move the cursor.

> to insert a decimal point or a

(Menu 7.5)

New

4. Enter your deadline and press [ ].

Viewing the task

When you select the T o do list menu, the tasks displa y with a check mark, if the task has been done, and a priority level indicator; for High, for Normal, and for Low.

To change the status of a specific task, press [].

While viewing a task or the task list, press < to access the following options:

•

New

: add a new task.

•

Mark

: change the status of the task.

•

Edit

: edit the task.

•

Sort

: sort the task by priority or status.

•

Copy

: copy the task.

•

Copy to calendar

as a memo.

•

Delete

: delete the task.

•

Delete all

•

Exit

: exit the

: copy the task to the calendar

: delete all tasks.

To do list

menu.

Options

Page 52

X200.book Page 49 Friday, October 14, 2005 10:31 AM

Voice memo

(Menu 7.6)

Use this menu to record voice memos. A voice memo can be up to 30 seconds.

Voice record

1. Press <

(Menu 7.6.1)

Record

> to start recording.

2. Speak into the microphone.

3. When you press <

Stop

>, or if the recording time

expires, the following options display:

•

Replay

•

: play back your memo.

Re-record

: discard the memo and record

another one.

•

Save

: save the memo.

•

Quit memo

4. Select

: cancel your recording and exit the

menu.

Save

to save the voice memo.

Voice

5. Enter a name of the voice memo and press <OK>.

Memo list

(Menu 7.6.2)

Use this menu to access the list of voice memos you have recorded.

Press <

•

Play

•

Send

•

Rename

•

Properties

Options

> to access the following options:

: play back your voice memo.

: send the voice memo via MMS.

: change the name of the voice memo.

: access the properties of the voice

memo.

•

Delete

: delete the voice memo.

Delete all

(Menu 7.6.3)

Use this menu to delete all of the voice memos you have recorded at one time.

Memory status

(Menu 7.6.4)

You can check the total amount of memory and the amount of memory currently in use for voice memos.

Currency exchange

(Menu 7.7)

Use this menu to do currency conversions.

1. Enter the rate of foreign currency and press <OK>.

Menu functions

Organiser

(Menu 7)

Page 53

X200.book Page 50 Friday, October 14, 2005 10:31 AM

Menu functions

2. Enter the amount of the source currency you want to convert and press <OK>.

The amount you entered and its equivalent value in the foreign currency display.

Phonebook

You can store phone numbers on your SIM card and in your phone’s memory. The SIM card and phone’s memory are physically separate, but they are used as a single entity called Phonebook.

To access this menu, press < select

Phonebook

Use this menu to search for numbers in Phonebook.

Finding an entry

1. Enter the first few letters of the name that you want to find.

2. Select an entry from the Phonebook list.

(Menu 8)

(Menu 8.1)

, or press <

> in Idle mode and

Phonebook

3. Scroll to a number and press [ ] to dial, or press <

Options

> to access Phonebook options.

Using Phonebook options

While viewing an entry, press < the following options:

•

Paste

: paste the number into the normal dialling

mode.

•

Edit

: edit entry information.

•

Delete

: delete the number.

•

Copy

: copy the number to the phone’s memory or

SIM card.

•

Caller group

•

Add entry

•

Send via IrDA

New entry

Use this menu to add a new entry to Phonebook.

: assign a caller group.

: add a new entry .

: send the entry via infrared port.

(Menu 8.2)

Options

> to access

Storing an entry in the phone’s memory

1. Select a number type.

Page 54

X200.book Page 51 Friday, October 14, 2005 10:31 AM

2. Select

3. Enter a name and press <OK>.

4. Enter a number or an e-mail address and press

5. Change the location number, if you want, and

Phone

Save

press <OK>.

Storing an entry on the SIM card

1. Select a number type.

2. Select

3. Enter a name and press <OK>.

4. Enter a number and press <

5. Change the location number, if you want, and

Group search

Use this menu to search your entries in Phonebook in caller groups.

1. Enter the first few letters of the group name.

2. Select a group and press <

SIM

press <OK>.

(Menu 8.3)

Save

View

3. Select the name you want.

4. Press [ ] to dial the number or < access Phonebook options.

Edit group

Use this menu to edit your caller groups’ properties. From the group list, press <

following options:

•

Call ring tone

from the group.

•

SMS tone

from the group.

•

Graphic

the group.

•

Group name

Speed dial

Use this menu to assign speed dial numbers (2 to 9) to eight of your most frequently called numbers.

(Menu 8.4)

Options

: set a ringtone for incoming calls

: set a ringtone for incoming messages

: set a graphic icon for incoming calls from

: assign a name to the group.

(Menu 8.5)

Options

> to access the

> to

Menu functions

Phonebook

(Menu 8)

Page 55

X200.book Page 52 Friday, October 14, 2005 10:31 AM

Menu functions

Assigning speed dial entries

1. Select a key location from 2 to 9. Key 1 is reserved for your voicemail server.

2. Select an entry from the Phonebook list.

3. Select a number, if the entry has more than one number.

Managing speed dial entries

While viewing the Speed dial screen, press <

Options

•

Dialling speed dial entries

Press and hold the appropriate key in Idle mode.

> to access the following options:

Change

: assign a different number to a key.

Delete

: delete the speed dial setting for a key.

Delete all

keys.

Number

a key.

: delete the speed dial settings for all

: check the name and number assigned to

Delete all

Use this menu to delete all of the entries from Phonebook.

1. Press [ ] to select the locations to be cleared.

2. Press <

3. Enter the phone password and press <OK>.

4. Press <

Memory status

Use this menu to check the total number of entries you can store and the number of the entries you have stored in the phone’s memory or on the SIM card.

SDN

This menu is available if your SIM card supports Service Dialling Numbers (SDN). Use this menu to view the list of SDNs assigned by your service provider, including emergency numbers, directory enquiries, and voicemail numbers.

Scroll to the number you want and press < [].

(Menu 8.6)

Delete

Yes

(Menu 8.8)

> twice to confirm the deletion.

(Menu 8.7)

Dial

> or

Page 56

X200.book Page 53 Friday, October 14, 2005 10:31 AM

Phone settings

Use this menu to customise your phone settings. You can also reset the settings to their default values.

To access this menu, press < select

Phone settings

Infrared activate

Use this menu to send or receive data to or from IrDAcompatible computers or phones through the infrared port.

With PC

Use this menu to use the infrared feature with a computer.

To use an infrared connection, you must:

• configure and activate an IrDA-compliant infrared

• activate the infrared feature on the phone; the

(Menu 9.1.1)

port on your PC.

IrDA icon ( ) appears on the top line of the display.

(Menu 9)

(Menu 9.1)

> in Idle mode and

• align the IrDA port on the phone with the IrDA port on your phone computer or another phone.

The connection is ready for data transmission. If there is no communication between your phone and

the IrDA-compliant device within 30 seconds activating the feature, it is automatically deactivated.

With other phone

Use this menu to send or receive Phonebook entries from another compliant phone.

(Menu 9.1.2)

Menu functions

Phone settings

(Menu

Page 57

X200.book Page 54 Friday, October 14, 2005 10:31 AM

Menu functions

Receiving data from another phone

1. Align the IrDA ports on both phones with each other.

2. When the list of the received data displays, select one of the two options:

To save an individual item:

1. Select the item you want from the list.

2. Press <

To save all data:

1. From the item list, press <

2. When FDN (Fixed Dialling Number) mode is

3. Press <

Options

data. Otherwise, select

one of the following options:

•

Save all vCard

•

Discard all vCard

entries.

enabled on your phone, enter the PIN2 and press <OK>.

Save

> and select

Discard

: save all Phonebook entries.

> to save the entries.

Save

to delete the data.

Options

: delete all Phonebook

to save the

> to select

Sending your Phonebook

You can send Phonebook entries via IrDA connection.

Display settings

Use this menu to change settings for the display and light.

Wallpaper

You can change the background image and the settings for the text of Idle mode.

•

Wallpaper list

•

Text display

time and date.

•

Text colour

Brightness

You can adjust the brightness of the display for varying lighting conditions.

Contrast

You can adjust the contrast of the display for varying lighting conditions.

(Menu 9.2.3)

(Menu 9.2)

(Menu 9.2.1)

: select a background image.

: determine the phone displays the

: select a text colour.

(Menu 9.2.2)

Page 58

X200.book Page 55 Friday, October 14, 2005 10:31 AM

Backlight

You can select the length of time the backlight and the display stay on.

•

Backlight on

backlight stays on.

•

Backlight dim

display is in Dimming mode after the backlight turns off. After a specified time, the display turns off.

Service light

The service LED on the front of the phone indicates when service is available on the phone. Use this menu to set whether or not the service light is used.

Graphic logo

Use this menu to display your service provider’s logo instead of its name.

Dialling font colour

Use this menu to select a font colour for the numbers entered while dialling.

(Menu 9.2.4)

: select the length of time the

(Menu 9.2.5)

(Menu 9.2.6)

(Menu 9.2.7)

Greeting message

Use this menu to enter the greeting that is displayed briefly when the phone is switched on.

Own number

Use this feature to check your phone numbers, or to assign a name to each of the numbers. Changes made here do not affect the actual subscriber numbers on your SIM card.

Language

Use this menu to select one of several languages for the display text.

Security

Use this menu to protect the phone against unauthorised use by managing the several access codes of your phone and SIM card.

(Menu 9.5)

(Menu 9.6)

If you enter an incorrect PIN/PIN2 three times in succession, the SIM card is blocked. To unblock it you need to enter your PUK/PUK2 (Personal Unblocking Key). The codes are supplied by your network operator.

(Menu 9.3)

(Menu 9.4)

Menu functions

Phone settings

(Menu

Page 59

X200.book Page 56 Friday, October 14, 2005 10:31 AM

Menu functions

PIN check

The 4-to 8-digit PIN (Personal Identification Number) protects your SIM card against unauthorised use. When this feature is enabled, the phone requires your PIN each time it is switched on.

Change PIN

Use this menu to change your PIN. The PIN check feature must be enabled to use this feature.

Phone lock

The Phone lock feature locks the phone from unauthorised use.

When this feature is enabled, you must enter a 4- to 8-digit phone password each time the phone is switched on.

The password is preset to password, use the

Change password

Use this menu to change your phone password.

(Menu 9.6.1)

(Menu 9.6.2)

(Menu 9.6.3)

Change password

(Menu 9.6.4)

00000000

. To change the

menu.

Privacy

Use this menu to lock your media contents, including MMS messages, voice memos, images, and sounds.

1. Press [ ] to select the items to be locked.

2. Press <OK> to lock the marked items.

3. Enter the phone password and press <OK>. To access a locked item, you need to enter the phone

password.

SIM lock

The SIM lock feature allows your phone to work only with the current SIM by assigning a SIM lock code. You must enter the SIM lock code to use a different SIM card.

FDN mode

If supported by your SIM card, Fixed Dialling Number (FDN) mode restricts your outgoing calls to a limited set of phone numbers. When this feature is enabled, you can make calls only to phone numbers stored on the SIM card.

(Menu 9.6.5)

(Menu 9.6.6)

(Menu 9.6.7)

Page 60

X200.book Page 57 Friday, October 14, 2005 10:31 AM

Change PIN2

(Menu 9.6.8)

If supported by your SIM card, the Change PIN2 feature changes your current PIN2.

Extra settings

(Menu 9.7)

You can turn the automatic redialling or answering feature on or off.

•

Auto redial

: set the phone to make up to ten attempts to redial a phone number after an unsuccessful call.

•

Active folder

: answer an incoming call by opening

the phone.

•

Anykey answer

pressing any key, except <

Short cut

: answer an incoming call by

Reject

(Menu 9.8)

> or [ ].

You can use the Navigation keys as shortcut keys to access specific menus directly from Idle mode. Use this menu to change the shortcut assignments for the keys.

1. Select a key to be used as a shortcut key.

2. Select a menu to be assigned to the key.

Reset settings

(Menu 9.9)

Use this menu to reset the phone’s settings you have changed.

Enter the 4- to 8-digit phone password and press <OK>.

The password is preset to

00000000

. You can

change this password.p. 56

Menu functions

Phone settings

(Menu

Page 61

X200.book Page 58 Friday, October 14, 2005 10:31 AM

Solve problems

Help and personal needs

To save the time and expense of an unnecessary service call, perform the simple checks in this section before contacting a service professional.

When you switch on your phone, the following messages may appear:

“Insert SIM card”

• Be sure that the SIM card is correctly installed. “Phone locked Enter password”

• The automatic locking function has been enabled. You must enter the phone’s password before you can use the phone.

“Enter PIN”

• You are using your phone for the first time. You must enter the PIN supplied with the SIM card.

• The PIN check feature is enabled. Every time the phone is switched on, the PIN has to be entered. To disable this feature, use the

PIN check

menu.

“Enter PUK”

• The PIN code has been entered incorrectly three times in succession, and the phone is now blocked. Enter the PUK supplied by your service provider.

“No service,” “Network failure,” or “Not done” displays

• The network connection has been lost. You may be in a weak signal area. Move and try again.

• You are trying to access an option for which you have no subscription with your service provider. Contact the service provider for further details.

You have entered a number but it was not dialled

• Be sure that you have pressed [ ].

• Be sure you have accessed the right cellular network.

• Be sure that you have not set an outgoing call barring option.

Page 62

X200.book Page 59 Friday, October 14, 2005 10:31 AM

Your correspondent cannot reach you

•Be sure your phone is switched on. ([ ] pressed for more than one second.)

• Be sure you are accessing the correct cellular network.

• Be sure that you have not set an outgoing call barring option.

Your correspondent cannot hear you speaking

• Be sure you have switched off the microphone.

• Be sure you are holding the phone close enough to your mouth. The microphone is located at the bottom of the phone.

The phone starts beeping and “Warning Low battery” flashes on the display

• Your battery is insufficiently charged. Recharge the battery .

The audio quality of the call is poor

• Check the signal strength indicator on the display ( ). The number of bars indicates the signal strength from strong ( ) to weak ( ).

• T ry moving the phone slightly or moving closer to a window if you are in a building.

No number is dialled when you re-call a Phonebook entry

•Use the

• Re-store the number, if necessary.

been stored correctly.

menu to ensure the number has

The battery doesn’t charge properly or the phone sometimes turns itself off

• Wipe the charging contacts both on the phone and on the battery with a clean soft cloth.

If the above guidelines do not help you to solve the problem, take note of:

• The model and serial numbers of your phone

• Your warranty details

• A clear description of the problem

Then contact your local dealer or Samsung after-sales service.

Page 63

X200.book Page 60 Friday, October 14, 2005 10:31 AM

Health and safety information

SAR certification information

This phone meets European Union (EU) requirements concerning exposure to radio waves.

Your mobile phone is a radio tr ansmitter and receiver. It is designed and manufactured to not exceed the limits for exposure to radio-frequency (RF) energy, as recommended by the EU Council. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines were developed by independent scientific organisations through the periodic and thorough evaluation of scientific studies. The limits include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health.

The exposure standard for mobile phones employs a unit of measurement known as Specific Absorption Rate (SAR). The SAR limit recommended by the EU Council is 2.0W/

kg. The highest SAR value for this model phone was 0.74W/kg.

SAR tests are conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station, the lower the power output of the phone.

Before a new model phone is available for sale to the public, compliance with the European R&TTE Directive must be shown. This directive includes as one of its essential requirements the protection of the health and safety of the user and any other person.

* The SAR limit for mobile phones used by the public is 2.0 watts/

kilogram (W/kg) averaged over ten grams of body tissue. The limit incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. The SAR values may vary, depending on national reporting requirements and the network band.

Page 64

X200.book Page 61 Friday, October 14, 2005 10:31 AM

Precautions when using batteries

• Never use a charger or battery that is damaged in any way.

• Use the battery only for its intended purpose.

• If you use the phone near the network’s base station, it uses less power. Talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator.

• Battery charging time depends on the remaining battery charge, the type of battery, and the charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time is noticeably shorter than normal, it is time to buy a new battery.

• If left unused, a fully charged battery will discharge itself over time.

• Use only Samsung-approved batteries, and recharge your battery only with Samsung-approved chargers. Disconnect the charger from the power source when it is not in use. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life.

• Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first.

• Do not leave the battery in hot or cold places because the capacity and lifetime of the battery will be reduced. T ry to keep the battery at room temperature. A phone with a hot or cold battery may not work temporarily , even when the bat tery is fully charged. Liion batteries are particularly affected by temperatures below 0°C (32°F).

• Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object like a coin, clip or pen causes a direct connection between the + and – terminals of the battery (metal strips on the battery). For example, do not carry a spare battery in a pocket or bag where the battery may contact metal objects. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting.

• Dispose of used batteries in accordance with local regulations. Always recycle. Do not dispose of batteries in a fire.

Page 65

X200.book Page 62 Friday, October 14, 2005 10:31 AM

Health and safety information

Road safety

Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold.

When driving a car, driving is your first responsibility. When using your wireless phone while driving, follow local regulations in the country or region you are in.

Operating environment

Remember to follow any special regulations in force in the area you are in, and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.

When connecting the phone or any accessory to another device, read its user’s guide for detailed safety instructions. Do not connect incompatible products.

As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder).

Electronic devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives.

Pacemakers

Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research and recommendations of Wireless Technology Research. If you have any reason to suspect that interference is taking place, switch off your phone immediately .

Hearing aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives.

Page 66

X200.book Page 63 Friday, October 14, 2005 10:31 AM

Other medical devices

If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy.

Your physician may be able to assist you in obtaining this information.

Switch off your phone in health care facilities when regulations posted in these areas instruct you to do so.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle.

You should also consult the manufacturer of any equipment that has been added to your vehicle.

Posted facilities

Switch off your phone in any facility where posted notices require you to do so.

Potentially explosive environments

Switch off your phone when in any area with a potentially explosive atmosphere, and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Users are advised to switch off the phone while at a refuelling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants, or where blasting operations are in progress.

Areas with a potentially explosive atmosphere are often but not always clearly marked. They include the areas below decks on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas, such as propane or butane, areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine.

Health and safety information

Page 67

X200.book Page 64 Friday, October 14, 2005 10:31 AM

Health and safety information

Emergency calls

This phone, like any wireless phone, operates using radio signals, wireless, and landline networks as well as userprogrammed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications like medical emergencies.

To make or receive calls, the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present location. Emergency numbers vary by location.

3. Press [ ].

Certain features like Call Barring may need to be deactivated before you can make an emergency call. Consult this document and your local cellular service provider.

Other important safety information

• Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device.

• Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.

• Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the phone, its parts, or accessories.

• For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. Improperly installed wireless equipment could result in serious injury if the air bag inflates.

• Switch off your phone before boarding an aircraft. It is dangerous and illegal to use wireless phones in an aircraft because they can interfere with the operation of the aircraft.

• Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.

Page 68

X200.book Page 65 Friday, October 14, 2005 10:31 AM

Care and maintenance

Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years.

• Keep your phone and all its parts and accessories out of the reach of small children and pets. They may inadvertently damage these things or choke on small parts.

• Keep the phone dry. Precipitation, humidity, and liquids contain minerals that corrode electronic circuits.

• Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone.

• Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged.

• Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone’s electronic circuit boards.

• Do not drop, knock, or shake the phone. Rough handling can break internal circuit boards.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution.

• Do not paint the phone. Paint can clog the device’s moving parts and prevent proper operation.

• Do not put the phone in or on heating devices, such as a microwave oven, stove, or radiator. The phone may explode when overheated.

• When the phone or battery gets wet, the label indicating water damage inside the phone changes colour. In this case, phone repairs are no longer guaranteed by the manufacturer's warranty, even if the warranty for your phone has not expired.

• If your phone has a flash or light, do not use it too close to the eyes of people or animals. This may cause damage to their eyes.

Health and safety information

Page 69

X200.book Page 66 Friday, October 14, 2005 10:31 AM

Health and safety information

• Use only the supplied or an approved replacement antenna. Unauthorised antennas or modified accessories may damage the phone and violate regulations governing radio devices.

• If the phone, battery, charger, or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service.

Page 70

X200.book Page 67 Friday, October 14, 2005 10:31 AM

Index

ABC mode, text input • 19 Active folder • 57 Alarm • 46 Answering

call • 23

second call • 24 Anykey answer • 57 Auto redial • 57

Background image • 54 Backlight time, set • 55 Band selection • 31 Barring, calls • 30 Battery

charging • 7

low indicator • 8

precautions • 61 Broadcast messages • 37 Browser, web • 42

Calculator • 48 Calendar • 46

Call cost • 28 Call records

dialled • 28 missed • 27

received • 28 Call time • 28 Caller ID • 31 Calls

answering • 23

barring • 30

holding • 24

redialling • 22

rejecting • 23

transferring • 25

waiting • 30 CB (Cell Broadcast) messages • 37 Characters, enter • 19 Connection tone • 33 Converter • 49 Creating messages

MMS • 39

SMS • 35 CUG (Closed User Group) • 31

Date, set • 47 Deleting

call records • 27 MMS • 38, 40 phonebook • 52

SMS • 34, 40 Delivery reports, message • 40 Dialled calls • 28 Dialling font, set • 55 Display

backlight, set • 55

brightness • 54

contrast • 54

icons • 10

language • 55

layout • 10

service light, set • 55

settings • 54 Diverting calls • 29 DTMF tones, send • 25

Emergency calls • 64

FDN (Fixed Dialling Number) mode • 56 Folder tone • 33 Funbox • 42

Games • 44 Greeting message • 55

Health and safety • 60 Holding, call • 24

Icons, description • 10 Images, downloaded • 45 Inbox, messages

MMS • 37

SMS • 34 Infrared port • 53 International calls • 22 Internet • 42

Java applications • 44

Page 71

X200.book Page 68 Friday, October 14, 2005 10:31 AM

Index

Keypad tones

selecting • 32 sending/muting • 25 volume • 32

Language, select • 55 Last number, redial • 22 Locking

menu functions • 56 phone • 56 SIM card • 56

Low battery indicator • 8

Memory status

downloaded items • 45 messages • 40

phonebook • 52 Message tone • 32 Messages

cell broadcast • 37

greeting • 55

MMS • 37

push • 41

SMS • 33

voice • 37

Minute minder • 33 Missed calls • 27 MMS messages

creating/sending • 39 deleting • 38 setting • 40 viewing • 37

Multiparty-calls • 26

Names

entering • 19

searching • 50 Network band, selection • 30 Network services • 29

Organiser • 46 Outbox, messages

MMS • 38

SMS • 34

Password

call barring • 30

phone • 56 Phone

care and maintenance •

display • 10 icons • 10 locking • 13, 56 password • 56 resetting • 57 switching on/off • 8 unpacking • 6

Phonebook

adding • 50 deleting • 52 finding • 50 options • 50

speed dialling • 51 PIN, change • 56 PIN2, change • 57 Power on/off tone • 33 Privacy • 56 Problems, solve • 58 Push messages • 41

Received calls • 28 Recording, voice memos • 49 Redialling

automatically • 57

manually • 22

Resetting phone • 57 Ringer

incoming calls • 32

messages • 32 Road safety • 62 Roaming • 30

Safety

information • 60 SDN (Service Dialling Numbers) • 52 Security, calls • 55 Sent messages

MMS • 37, 38

SMS • 34 Service light • 55 Shortcut • 13, 57 Silent mode • 13 SIM card

inserting • 7

locking • 56 SMS messages

creating/sending • 35

deleting • 36

setting • 36

viewing • 34

Page 72

X200.book Page 69 Friday, October 14, 2005 10:31 AM

Sound settings • 32 Sounds, downloaded • 45 Speakerphone • 25 Speed dial • 51 Switching on/off

microphone • 25 phone • 8

T9 mode, text input • 20 Templates

MMS • 39

SMS • 35 Text, enter • 19 Time, set • 47

Voice memos • 49 Voicemail server • 37

Waiting call • 30 Wallpaper • 54 Web browser

access • 42

bookmarks • 43 World time • 46

Index

Samsung GH68-07973A User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual