Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Important Safety Precautions
Travel Adapter
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on, especially the phone is in
service.
Emergency Call
Ensure the phone is switched on and in service. Key
in the emergency number for your present location,
then press the key. If certain features are in
use, deactivate those features before you can make
an emergency call. Give all the necessary
information as accurately as possible. Do not cut off
the call until given permission to do so.
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries.
Qualified Service
Only qualified service personnel may install or
repair your phone.
For more detailed safety information, see “Health
and Safety Information” on page 160.
Unpacking
Your package contains the following items:
Phone
Battery
Owner’s Manual
Note
: The items supplied with your phone may be
different depending on the country.
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
• Battery charger
•Simple hands-free kit
•Cigarette lighter adapter
• Data kit
Hand Strap
Wearable
Ear-Microphone
8
9
Your Phone
Phone Layout
The following illustrations show the main elements
of your phone:
Open View
Closed View
Camera
External
display
Your Phone
Camera key
Folder
Soft key (left)
Ear-microphone
Volume/Menu
browse keys
Dial/Menu
confirmation key
Cancel/Back/
Correction key
IrDA port
Special
function keys
10
jack
Earpiece
Key(s)Description
Perform the functions indicated by the
text above them, on the bottom line of
Main display
(soft keys)
the display.
In Menu Mode, scroll through the
1
menu options.
In Idle Mode, the Left key enters the
Navigation keys
(Up/Down/Left/
Right)
1
Soft key (right)
WAP Browser
key
Power On/Off /
Menu exit key
Alphanumeric
keys
New SMS message writing
the Right key enters the
call’s melody setting
Up key enters the
Calendar
The Down key enters the
menu, when pressed and held it
switches the phone to the capture
mode.
In Idle Mode, launches the WAP
(Wireless Application Protocol) browser
screen,
Incoming
menu and the
menu.
Camera
directly.
Microphone
11
Your Phone
Your Phone
Key(s)Description
Makes or answers a call.
In Idle Mode, accesses the call log list.
In Menu Mode, selects a menu function
or stores information that you have
entered, such as a name in the phone
or SIM memory.
Deletes characters from the display.
When pressed and held in Idle Mode,
quickly accesses the
screen.
In Menu Mode, returns to previous
menu.
Ends a call.
When pressed and held, switches the
phone on or off.
In Menu Mode, cancells your input and
returns to Idle Mode.
When pressed and held in Idle Mode,
quickly accesses your voice mail
server.
Enter numbers, letters and some
special characters.
Used for various purposes in different
functions.
When pressed and held while entering
a phone number, the key enters a
pause.
When pressed and held in Idle Mode,
the key enters or exits the Quiet
12
Mode.
(continued)
New memo
Key(s)Description
(continued)
(on the left side of the phone)
During a call, adjust the earpiece
volume.
In Idle Mode with the phone open,
adjust the key tone volume.
When pressed and held at an incoming
call with the folder closed, reject the
call or silence the ring tone. See
page 105.
(on the right side of the phone)
Turns the camera capture mode on.
In capture mode, works as a camera
shutter.
Displays
Main Display Layout
The display has three areas:
Icons
Text and
graphic area
Menu Phonebook
Soft keys
Indications
13
Your Phone
Your Phone
AreaDescription
First lineDisplays various icons. See
page 14.
Middle linesDisplay messages, instructions
and any information that you
enter, such as number to be
dialled.
Last lineShows the functions currently
assigned to the two soft keys.
Icons
IconDescription
Shows the received signal strength. The
more the number of bars, the stronger
the signal.
Appears when a call is in progress. When
your SIM card supports ALS (Alternate
Line Service), this icon may appears with
the number 1, 2, or both.
For example: , , .
Appears when you are out of a service
area. When it displays, you cannot make
or receive calls.
Appears when you have new or
unchecked voice messages. When your
SIM card supports ALS (Alternate Line
Service), this icon may appears like ,
, .
IconDescription (continued)
Appears when you have new or unread
messages.
Appears when you have new or
unchecked multimedia messages.
Appears when you are retrieving a
multimedia message.
Appears when you set the alarms to ring
at a specified time.
Appears when the IrDA port is active. For
details, see page 106.
Appears when you connect the phone to
the computer by the IrDA port.
Appears when you are connected to the
GPRS network.
Appears when the Call diverting feature is
activated.When your SIM card supports
ALS (Alternate Line Service), this icon
may appears with the number 1, 2, or
both.For example: , , .
Appears when you are at the home zone.
May be shown only if your service provider
(
supports this feature)
Appears when your are at the office zone.
(
May be shown only if your service provider
supports this feature)
14
15
Your Phone
Your Phone
IconDescription (continued)
Appears when you set the alert type for
incoming calls to Vibration or Vibration then melody. For further details, see
page 94.
Appears when the Quiet Mode is active.
Shows the level of your battery. The more
bars you see, the more power you have
left.
Main Display Off Mode
If you don’t press any key in a minute after
dimming of the main display, the main display goes
into the Off Mode to save the power. Press any key
to awake the main display from the Off Mode.
External Display
Your phone has an external display on the folder.
It indicates that you have an incoming call or
message, and notifies you at the specified time
when you set an alarm.
It is also an service available indicator. When you
set the Service light option (Menu 4.2.5.3) to
Type 1 or Type 2, it works. But the phone is no
service area, it doesn’t work.
When you press and hold one of the volume keys
with the folder closed, the external display’s
backlight illuminates.
When the ear-microphone is connected to the
phone, you can also use the button on it to turn it
on.
After the backlight turns off, if no key is pressed
within a given period of time, depending on the
Light time menu option (Menu 4.2.5.2), the
external display goes into the Off Mode to save the
power. Press and hold one of the volume keys to
awake the external display from the Off Mode.
Backlight
The main display and the keypad are illuminated by
a backlight. When you press any key or open the
folder, the backlight illuminates. It turns off if no
key is pressed within a given period of time,
depending on the Backlight menu option. For
further details, see page 100.
Note
: The backlight remains on at all times when the
phone is connected to an optional car kit.
Built-in Antenna
Your phone has a built-in antenna. As with other
mobile radio transmitting equipment, do not touch
the antenna unnecessarily when the phone is
switched on. Contact with the antenna affects call
quality and may cause the phone to operate at a
higher power level than needed.
16
17
Getting Started
Inserting/Removing the SIM Card
When you subscribe to a cellular network, you are
provided with a SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
•Keep all miniature SIM cards out of the reach of
small children.
• The SIM card and its data can be easily damaged
by scratches or bending, so be careful when
handling, inserting or removing the card.
• When installing the SIM card, always make sure
that the phone is switched off before you remove
the battery.
Inserting the SIM Card
1. If necessary, remove the battery by referring to
page 19.
2. Insert and slide the SIM card under the two
tabs, ensuring that the notched corner is top left
and the gold contacts of the card face into the
phone.
Getting Started
Removing the SIM Card
To remove the SIM card, slide the card out of the
holder, as shown.
Installing/Removing/Charging the
Battery
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
Note
: You must fully charge the battery before using
your phone for the first time. A discharged
standard battery is fully recharged in
approximately 130 minutes.
Installing the Battery
1. Insert the teeth on the bottom of the battery
into the corresponding slots on the phone.
18
19
Getting Started
Getting Started
2. Press the battery against the back of the phone
until it clicks into place.
Removing the Battery
1. Switch off the phone by pressing and holding the
key.
2. To remove the battery, pull the battery catch
toward the top of the phone and hold it in that
position. Lift the battery away from the phone.
Charging the Battery by Using the Travel
Adapter
Note
: The phone can be used while the battery is
being charged, but this causes the battery to
charge more slowly.
1. Plug the connector of the travel adapter into the
jack at the bottom of the phone.
Check that the arrow on the connector is facing
towards the front of the phone.
2. Plug the adapter into a standard AC wall outlet.
While charging, the battery icon at the top righthand corner of the displays repeatedly fills to
show that the battery is charging.
20
21
Getting Started
Menu Phonebook
Getting Started
3. When charging is finished and the battery icon
becomes solid and “Fully charged” message is
displayed, disconnect the adapter from the
power outlet and from the phone by pressing
the grey tabs on both sides of the connector and
pulling the connector out.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, the battery sensor informs you in
the following ways: an empty battery icon flashes
(), you hear a warning tone and a message
repeats at regular intervals on the display.
When the battery becomes too weak for the phone
to operate, it switches off automatically.
Switching the Phone On or Off
To switch the phone on:
1. Open the folder.
2. Hold down the key until the phone
switches on.
3. If the phone asks for a PIN, enter the PIN and
press the Ok soft key. For further details, see
page 157.
The phone searches for your network and the
current date and time appear on the main and
external displays. After finding it, you can make
or receive a call.
Service Provider
Wed 17 Sep 03
12:53
Note
: To change the language, use the
Language
menu option (
For further details, see page 101.
To switch the phone off:
Hold down the key until the power-off
animation displays.
12:53
Wed 17/09
Menu 4.3
).
22
23
Getting Started
Getting Started
Selecting Functions and Options
Your phone offers a set of functions that allow you
to customise your phone. These functions are
arranged in menus and sub-menus, accessed via
the two soft keys marked and . Each menu
and sub-menu allows you to view and alter the
settings of a particular function.
The roles of the soft keys vary according to the
current context; the labels or icons on the bottom
line of the display and just above the soft keys
indicate their current roles.
Example
:
Service Provider
Wed 17 Sep 03
12:53
MenuPhonebook
1
To view various functions/options available or select
the one is required:
1. Press the appropriate soft key.
2. ToPress the
select the:
Select soft key.
• function displayed
• option highlighted
view the next function or
Down key.
highlight the next option
on a list
move back to the
Up key.
previous function or
option on a list
move back up one level
in the structure
(or Back) soft
key or C key.
return to Idle Mode key.
In some functions, you may be asked for a
password or PIN. Enter the required code and press
the Ok soft key.
Press the left soft
key to access the
menu functions.
24
Press the right soft
key to access the
Phonebook feature.
25
Call Functions
Making a Call
Using the Number Keypad
When the idle screen is displayed, enter the area
code and phone number, and press the key.
Note:
If you have set the
4.5
) to On, the number is redialled
automatically up to ten times if the person you
called does not answer or the line is busy. For
further details, see page 105.
Correcting the Number
Auto redial
option (
Menu
Call Functions
Making an International Call
1. Press and hold the 0 key for the international
prefix. The + character appears.
2. Enter the country code, area code and phone
number and press the key.
Making a Call from Phonebook
You can store the names and phone numbers called
regularly in the SIM card and phone’s memory,
which are jointly called the Phonebook. You then do
not need to remember all your numbers; simply
select the required name to recall the associated
number.
For further details about the Phonebook feature,
see page 53.
To clearPress the
the last digit
displayed
any other digit in
the number
the all digits
displayed
26
C key.
Left or Right key until the
cursor (|) is immediately to
the right of the digit to be
cleared and press the C key.
You can also insert a missing
digit simply by pressing the
appropriate key.
C key and hold it down for
more than one second.
Using the Call Logs
The phone stores up to 20 calls dialled, received or
missed chronologically. The last call is saved in the
first position. If the same number occurs more than
once, only the latest occurrence is saved.
To recall any of these numbers:
1. Press the key in Idle Mode to access the Call
log list.
2. Use the Up and Down keys to scroll through the
list until the number you want highlights.
The call logs are listed with the following icons:
• : Dialled calls
• : Received calls
• : Missed calls
27
Call Functions
Call Functions
3. To dial the number, press the key.
To view each call record, see “Call Records” on
page 90.
Viewing Missed Calls
If you have a subscription that includes the Caller
Line Identification (CLI) feature and you are unable
to answer a call for any reason, you can find out
who was calling you so that you can call the person
back.
The number of missed calls displays on the idle
screen immediately after a call was missed.
To view the missed calls immediately:
1. If the folder is closed, open it.
2. Press the Missed soft key.
The list of the missed calls displays.
3. If necessary, scroll to the number you want by
pressing the Up or Down key.
4. To dial the number, press the key.
To use the missed call options, see “Missed Calls”
on page 90.
Note
: To clear the missed call notification on the
display, press the key. When you also
have voice mails, short messages or
multimedia messages and multi CBs, the right
soft key indication changes in the following
Missed, Connect, View, CB
order:
Phonebook
.
and
Speed-dialling from Phonebook
Once you have stored numbers in the Phonebook,
you can dial a number simply by pressing one or
two keys. For further details, see page 57.
Ending a Call
When you want to finish your call, briefly press the
key or close the folder.
Answering a Call
When somebody calls you, the phone rings and
displays the incoming call animation.
If the caller can be identified, the caller’s phone
number, or name if stored in your Phonebook,
displays.
To answer a call, open the folder. If it is already
open, press the key or Accept soft key.
Note
: You can answer a call while using Phonebook or
menu features. The current operation stops.
Rejecting a Call
To reject an incoming call, press the key or
Reject soft key.
If the Side key option is set to Reject, you can
press and hold one of the volume keys on the left
side of the phone to reject an incoming call; see
page 105.
28
29
Call Functions
Call Functions
Adjusting the Volume
During a call, if you wish to adjust the earpiece
volume, use the volume keys on the left side of the
phone.
When you hear a sound, such as ringtone, you can
also adjust the earpiece volume. But it is not fixed.
Press the key to increase the volume level and
the key to decrease it.
1
In Idle Mode with the folder open, you can adjust
the key tone volume using the and keys.
Note
: When a call comes in, you can reject the call or
mute the call ringer by pressing and holding
one of the volume keys, depending on your
setting of the
4.6
). For further details, see page 105.
Side key
menu option (
Menu
Accessing Options During a Call
Your phone provides a number of control functions
that you can use during a call.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s
microphone off so that the other person cannot
hear you.
Example
: You may wish to say something to
another person in the room but do not
want the calling person to hear you.
1. Press the Options soft key.
2. When Mute highlights, press the Select soft
key.
The Mute icon () appears on the bottom line
of the display and your correspondent can no
longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. When Unmute highlights, press the Select soft
key.
The Mute icon disappears and your
correspondent can hear you.
Muting/Sending Key Tones
You can turn the key tones off or on during a call.
When the Mute keys option is selected, your phone
does not transmit the key tones. It allows you to
press keys without hearing annoying key tones
during a call.
To communicate with answering machines or
computerised telephone systems, the Send keys
option must be selected.
30
31
Call Functions
Call Functions
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can switch between the
calls.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want
by pressing the Retrieve soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you want to dial or
look it up in the Phonebook.
2. Press the key to dial the second call.
The first call is automatically put on hold.
Or alternatively:
1. Put the current call on hold by pressing the Hold
soft key.
2. Make the second call in the normal way.
To switch between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
To end the call on hold, press the Options soft key
and select the End held call option.
When you want to finish, end each call normally by
pressing the key.
Answering a Second Call
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have activated the Call waiting
option (see page 127). You will be notified of an
incoming call by a call waiting tone.
To answer a call while you have another call in
progress:
1. Press the key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the Swap
soft key.
3. To end the call on hold, press the Options soft
key and select the End held call option.
To end the current call, press the key.
The call on hold is automatically reconnected to
you.
Transferring a Call
You can transfer the current call to the call on hold
if this service is supported by the network, so that
the callers can talk to each other. You are
disconnected from both of them.
1. During a call, answer or make a call in the
normal way, and press the Options soft key.
2. Press the Up or Down key to select the Transfer
option and press the Select soft key.
The two people are connected to each other.
32
33
Call Functions
Call Functions
Searching for a Number in Phonebook
You can search for a number in your Phonebook
during a call.
1. Press the Options soft key.
2. If necessary, press the Up or Down key to
highlight the Phonebook option. Press the
Select soft key.
3. Select the Find name option and press the
Select soft key.
The Phonebook entries are listed.
4. Enter the first a few letters of the name that you
want to find.
The Phonebook entries are listed starting with
the first entry matching your input.
Note
: You can also scroll through Phonebook from
the beginning, by pressing
key
.
the Up or Down
5. To view the highlighted entry, press the Ok soft
key.
For further details about the Phonebook feature,
see page 53.
Using the Message Service
You can read or write a new message during a call.
1. Press the Options soft key.
2. Press the Up or Down key to highlight the
Message option. Press the Select soft key.
3. To read a received message, select the Step
option, and then scroll to the message that you
want to read.
To write a new message, select the New message option.
4. Press the Select soft key.
For further details about the SMS feature, see
page 66.
Making a Multi-party Call
A multi-party call feature is a network service that
allows up to six people to take part simultaneously
in a multi-party or conference call. For more
information, contact your service provider.
Setting up the Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. To join the first participant to the multi-party
call, press the Options soft key and select the
Join option. Press the Select soft key.
4. To add a new person to the multi-party call, call
the person in the normal way. Then press the
Options soft key and select the Join option.
Press the Select soft key.
You can add incoming callers by answering the call
and selecting the Join option. Repeat as needed.
34
35
Call Functions
Call Functions
Having a Second Call During a Multi-party Call
To answer or make a call when you have the multiparty call:
1. To place the multi-party call on hold, press the
Hold soft key.
2. Answer or make a call in the normal way.
3. You can reactivate the multi-party call on hold
by pressing the Retrieve soft key.
To end the multi-party call on hold, press the
Options soft key and select the End held
multiparty option.
To answer an incoming call when you have the
multi-party call in progress and another call on
hold:
1. Press the Accept soft key.
2. Select the End held option to end the call on
hold.
Or, select the End current option to end the call
in progress.
3. Answer the new call by pressing the key.
Having a Private Conversation With One
Participant
1. Press the Options soft key and select the Split
option. Press the Select soft key.
2. Press the Up or Down key to highlight a
participant and press the Select soft key.
Now you can talk privately with that person. The
other participants can continue to converse with
each other
3. To return to the multi-party call, press the
Options soft key and select the Join option.
4. Press the Select soft key.
All of the multi-party call participants can now
hear each other.
Removing One Participant
1. Press the Options soft key and select the
Remove option.
2. Press the Up or Down key to highlight a
participant and press the Select soft key.
The call ends with that participant, but you can
continue to talk with the other participants.
3. End the multi-party call by closing the folder or
pressing the key.
36
37
Call Functions
Using the Ear-microphone
With the ear-microphone, you can make or answer
a call without holding the phone.
When you connect the ear-microphone to the jack
at the left side of the phone, the button on the
ear-microphone works as listed below:
ToPress
redial the last call the button twice in Idle Mode.
answer a call and hold the button when
you receive the call.
end a call and hold the button when
you have finished the call.
Entering Text
At many times while you are using your phone, you
need to enter text, such as when storing a name in
the Phonebook, writing a new message, creating
your personal greeting or scheduling events on your
calendar.
You are provided with the following text input
modes:
• T9 mode
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter – when you press the 5
key once, J, K or L may be displayed. The T9
mode automatically compares your keystrokes
with an internal linguistic dictionary to determine
the correct word, thus requiring far fewer
keystrokes than the traditional ABC mode.
• ABC mode
This mode allows you to enter letters by pressing
the key labelled with the required letter once,
twice, three or four times until the letter displays.
• Number mode
This mode allows you to enter numbers.
• Symbolic mode
This mode allows you to enter special characters.
*
38
*
is a registered trademark of Tegic Communications,
Inc. and is licensed under U.S. Patent 5,818,437/
5,953,541/ 6,011,554.
39
Entering Text
Entering Text
Changing the Text Input Mode
When you are in a field that allows characters to be
entered, you will see the text input mode indicator
at the bottom of the display.
Example
: Entering a name in the Phonebook
Enter name
16
Ok
To change to another text input mode:
1. Press the right soft key indicating the current
text input mode.
2. Scroll to the mode you want to use by pressing
the Up or Down key.
The Language select option allows you to
change the text input language.
You can use the Add word option to add new
words into the T9 dictionary. See page 42.
: If you want to exit the menu without
Note
changing the mode, press the soft key or
key.
3. Press the Select soft key to confirm the
highlighted text input mode.
Text input mode indicator:
Eng
T9 English mode
Quickly Changing the Text Input Mode
To switch between thePress and hold the
Number and previous mode key.
Symbol and previous mode key.
ABC and T9 moderight soft key.
Using the T9 Mode
To type a word in the T9 mode:
1. Start entering the word by pressing keys 2 to 9.
Press each key only once for each letter.
Example
: To enter “hello” in the T9 mode, press
the 4, 3, 5, 5, and 6 keys.
The word you are typing appears on the display.
It may change with each key that you press.
2. Enter the whole word before editing or deleting
any keystrokes.
3. If the word is correct, start entering the next
word. Otherwise, press the 0 key repeatedly to
display alternative word choices for the keys
that you have pressed.
Example
: Both “of” and “me” have the sequence
of 6 and 3. The phone displays the
most commonly used choice first.
4. Insert a space between words by pressing the
key.
5. Continue entering the next word.
40
41
Entering Text
Entering Text
If Spell appears above the left soft key while you
are entering text, the word does not exist in the T9
dictionary. To type words not found in the T9 mode,
change the text input mode to the ABC mode, or
proceed as follows:
1. Press the Spell soft key, or press the right soft
key and select the Add word option.
2. Enter the word you want to add using the ABC
mode (see page 43) and press the Ok soft key.
The word is saved in the T9 dictionary and
inserted in the input field.
3. Continue entering other words in the T9 mode.
Smart Punctuation
To enter periods, hyphens or apostrophes, press the
1 key. The T9 mode applies rules of grammar to
insert the correct punctuation.
Example
: The 1 key is used twice to display two
punctuation marks.
l e t ‘ s e a t .
Changing the Case
To change the case of the next letter(s) that you
type, press the key. There are three cases:
• Lower Case (no indicator)
• Initial Capital ()
• Capital Lock ()
Inserting a Space
To insert a space between words, press the key.
42
Entering a Number directly
To enter a number, press and hold the number key.
Scrolling
To move the cursor to the left or right within the
text, press the Left or Right key.
Clearing Letters and Words
To clear the letter to the left of the cursor, press the
C key. You can clear all of the letters on the display
by pressing and holding the C key.
Returning to the Previous Screen
When the text input field is cleared, press and hold
the C key to return to the previous screen.
Using the ABC Mode
When typing in the ABC mode, press the key
labelled with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
Example
: To display the letter “C”, quickly press the
2 key three times. To display the letter
“K”, press the 5 key twice. This method is
called Multi-tap typing.
Note
: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
press the Right key or wait a few seconds for
the cursor to move to the right automatically,
and then enter the next letter.
Refer to the table for more information about the
characters available. The characters vary,
43
Entering Text
Entering Text
depending on the text input language. You can
select the language by setting one of the following
options:
• Language select; see page 40
• Input mode (Menu4.3.2); see page 101
List of the characters available
KeyCharacters in the Order Displayed
1. , - ? ! ‘ @ : 1
2A B C 2
3D E F 3
4G H I 4
5J K L 5
6M N O 6
7P Q R S 7
8T U V 8
9W X Y Z 9
00
(Capital Lock mode in English
Changing the Case
To change the case of the next letter(s) that you
type, press the key. There are three cases:
• Lower Case (no indicator)
• Initial Capital ()
• Capital Lock ()
Inserting a Space
To insert a space between words, press the key.
44
Entering a Number directly
To enter a number, press and hold the number key.
Scrolling
To move the cursor to the left or right within the
text, press the Left or Right key.
Clearing Letters and Words
To clear the letter to the left of the cursor, press the
C key. You can clear all of the letters on the display
by pressing and holding the C key.
Returning to the Previous Screen
When the text input field is empty, press and hold
the C key to return to the previous screen.
Using the Symbolic Mode
The Symbolic mode enables you to enter symbols in
your text.
ToPress the
)
display more
symbols
enter a symbolcorresponding number key.
return to the
previous text input
mode
Up or Down key.
Ok or soft key.
Using the Number Mode
The Number mode enables you to enter numbers in
your text. Press the keys corresponding to the
digits you want to enter.
45
Using the Menus
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions
are arranged in menus and sub-menus.
Using the Menus
Example: To access the Voice mail menu option,
press the Menu soft key, 1, 3 in Idle Mode.
List of Menu Functions
Accessing a Menu Function
The menus and sub-menus can be accessed by
pressing the Menu or Phonebook soft key in Idle
Mode, then scrolling with the navigation keys.
1. In Idle Mode, press the Menu soft key to access
the main menu or press the Phonebook soft
key to access Phonebook menu.
2. Scroll through the menus using the Left or Right
key.
3. Find the sub-menu that you wish to use by
scrolling with the Up or Down key.
4. Press the Select soft key to access the submenu.
If the menu that you have selected contains
further sub-menus, repeat steps 3 and 4.
5. Scroll to the option you want to choose with the
Up or Down key.
6. Press the Select soft key to choose the setting.
Note
: You can return to the previous menu level by
pressing the soft key.
You can also access the menus and sub-menus by
quickly entering the corresponding menu number.
Various menus let you check or change your phone
settings. The following list shows the menu
structure.
The numbers assigned to each menu option may
not match the menu number on the phone. It
depends on the services supported by your SIM
card.
Phonebook Menu
1. Phonebook
1.1 Find name
1.2 Add entry
1.3 Speed list
1.4 Copy all to phone
1.5 Send all via infrared
1.6 Delete all
2. Management
2.1 Own number
2.2 Group setting
2.3 Memory status
3. Services
3.1 Service directory
(see page 53)
(see page 63)
(see page 65)
46
47
Using the Menus
Using the Menus
Main Menu
1. Messages
1.1 Short message
1.2 Multimedia message
1.3 Voice mail
1.4 Preset messages
1.5 Broadcast
1.6 Settings
1.7 Memory status
(see page 66)
1.1.1 Inbox
1.1.2 New message
1.1.3 Outbox
1.1.4 Delete all
1.2.1 Inbox
1.2.2 New message
1.2.3 Outbox
1.2.4 Draft
1.2.5 My folder
1.2.6 Delete all
1.3.1 Connect to voice mail
1.3.2 Voice server number
1.5.1 Read
1.5.2 Receive
1.5.3 Channel
1.5.4 Language
1.6.1 Short message
1.6.2 Multimedia message
1.7.1 Short message
1.7.2 Multimedia message
2. Call records
2.1 Missed calls
2.2 Received calls
2.3 Dialled calls
2.4 Delete all
(see page 90)
2.5 Call time
2.5.1 Last call time
2.5.2 Total sent
2.5.3 Total received
2.5.4 Reset timers
2.6 Call costs
*
2.6.1 Last call cost
2.6.2 Total cost
2.6.3 Max cost
2.6.4 Reset counters
2.6.5 Set max cost
2.6.6 Price/Unit
3. Sound settings
3.1 Incoming calls
3.1.1 Default melodies
3.1.2 My sounds
3.1.3 Ring volume
3.1.4 Alert type
3.2 Messages
3.2.1 Short message
3.2.2 Multimedia message
3.3 Power on/off
3.4 Connection tone
3.5 Key tone
3.6 Minute minder
3.7 Quiet mode
4. Phone settings
4.1 Greeting message
4.2 Display
4.2.1 Wallpaper
4.2.2 Skin
4.2.3 Backlight
4.2.4 LCD brightness
4.2.5 Front LCD
4.3 Language
4.3.1 Text language
4.3.2 Input mode
(see page 94)
(see page 98)
48
* Shown only if supported by your SIM card.
49
Using the Menus
Using the Menus
4.4 Security
4.4.1 PIN check
4.4.2 Change PIN
4.4.3 Phone lock
4.4.4 Change password
4.4.5 Privacy
4.4.6 SIM lock
4.4.7 FDN mode
*
4.4.8 Change PIN2*
4.5 Auto redial
4.6 Side key
4.7 Fax mode
4.8 Infrared activation
4.9 Reset settings
4.9.1 Sound settings
4.9.2 Phone settings
4.9.3 All settings
5. Organiser
(see page 108)
5.1 New memo
5.2 Calendar
5.3 To do list
5.4 Clock
5.4.1 Set time
5.4.2 Set date
5.4.3 Set world time
5.4.4 Set format
5.5 Alarm
5.6 Calculator
5.7 Conversion
5.7.1 Currency
5.7.2 Length
5.7.3 Weight
5.7.4 Volume
5.7.5 Area
5.7.6 Temperature
5.8 Timer
5.9 Stopwatch
* Shown only if it is supported by your SIM card.
50
6. Network services
(see page 122)
6.1 Call diverting
6.1.1 Divert always
6.1.2 Busy
6.1.3 No reply
6.1.4 Unreachable
6.1.5 Cancel all
6.2 Call barring
6.2.1 All outgoing
6.2.2 International
6.2.3 International except to home
6.2.4 All incoming
6.2.5 Incoming while abroad
6.2.6 Cancel all
6.2.7 Change barring password
6.3 Call waiting
6.4 Network selection
6.5 Caller ID
6.6 Active line
7. Fun box
7.1 WWW Services
*
(see page 130)
**
7.1.1 Home
7.1.2 Bookmark
7.1.3 Go to URL
7.1.4 Clear cache
7.1.5 Proxy settings
7.1.6 Current proxy
7.1.7 Push messages
7.2 Media box
7.2.1 Photos
7.2.2 Images
7.2.3 Sounds
7.2.4 Delete all
7.2.5 Memory status
*
Shown only if it is supported by your SIM card
** May not be shown or supported by your network service
provider.
51
Using the Menus
7.3 JAVA world
8. Camera
(see
8.1 Take photos
8.2 My photos
8.3 My albums
8.4 Delete all
8.5 Settings
8.6 Memory status
7.3.1 Downloads
7.3.2 DNS setting
7.3.3 Memory status
page 144
)
Phonebook Menu
Phonebook offers the following features:
• Phonebook: allows you to find, create or set up
the speed-dialling feature and manage
Phonebook entries.
• Management: allows you to create or remove
your own number, set up caller groups and check
the memory status.
• Services: allows you to use the service directory
depending on your SIM card.
9. SIM AT(Application Toolkit)*
*
Shown only if it is supported by your SIM card.
52
Find Name
To search for a number in the phonebook, proceed
as follows.
1. Enter a letter(s) of the name that you want to
find.
The Phonebook entries are listed, highlighting
the entry matching your input.
2. If necessary, press the Up or Down key to scroll
to the entry you want.
3. Once you have found the entry, press the Ok
soft key.
4.
ToPress the
dial the displayed
number
change the
Phonebook entries
(Phonebook 1.1)
Options soft key. For
further details, see
page 54.
key.
53
Loading...
+ 65 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.