-35~25.7 dBm-35 ~25.7 dB m-35~25.7 dBm-35~25.7 dBm-35~25.7 dB m-35~25.7 dBm
-94 dBm-92 dBm-92 dBm-95dBm-95dBm-94dBm
>5Km>5Km>5Km>5Km>5 Km>5Km
1.4/3/5/10/15/20
MHz
1.4/3/5/10 MHz 5/10/15/20 MHz 1.4/3/5/10MHz 5/10/1 5/20 M Hz
2-3
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
3. Operation Instruction and Installation
Main Function
ItemDescription
OSAndroid V5.1 (Lolipop)
RFLTE Cat.4 (150/50Mbps)
Battery2,600mAh
Base Band1.2GHz Quad
Other RFA-GPS, Glonass, BT 4.0, USB 2.0, NFC, WIFI 802.11 b/g/n
Camera8MP A/F,(Main) with LED Flash, 5MP(Front)
LCD5.0" 540 x 960 qHD LCD
RAM1GB
SensorAccelerometer, Proximity, Magnetic
Charger: 5V/1A
Accessory
Data cable: 3pi, 0.8m
Ear phone: 3.5pi, 4pin
3-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
9. Reference Abbreviate
Reference Abbreviate
AAC
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
: Advanced Audio Coding.
AVC
: Advanced Video Coding.
BER
: Bit Error Rate
BPSK
: Binary Phase Shift Keying
CA
: Conditional Access
CDM
: Code Division Multiplexing
C/I
: Carrier to Interference
DMB
: Digital Multimedia Broadcasting
EN :
European Standard
ES :
Elementary Stream
ETSI
: European Telecommunications Standards Institute
MPEG
: Moving Picture Experts Group
PN
: Pseudo-random Noise
PS
: Pilot Symbol
QPSK
: Quadrature Phase Shift Keying
RS
: Reed-Solomon
SI
: Service Information
TDM
: Time Division Multiplexing
TS :
Transport Stream
9-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
1. Safety Precautions
1-1. Repair Precaution
Before attempting any repair or detailed tuning, shield the device from RF noise or static
electricity discharges.
Use only demagnetized tools that are specifically designed for small electronic repairs,
as most electronic parts are sensitive to electromagnetic forces.
Use only high quality screwdrivers when servicing products. Low quality screwdrivers can
easily damage the heads of screws.
Use only conductor wire of the properly gauge and insulation for low resistance, because of
the low margin of error of most testing equipment.
We recommend 22-gauge twisted copper wire.
Hand-soldering is not recommended, because printed circuit boards (PCBs) can be easily
damaged, even with relatively low heat. Never use a soldering iron with a power rating of
more than 100 watts and use only lead-free solder with a melting point below 250°C (482°F).
Prior to disassembling the battery charger for repair, ensure that the AC power is disconnected.
Always use the replacement parts that are registered in the SEC system. Third-party replac
ement parts may not function properly.
1-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Many semiconductors and ESDs in electronic devices are particularly sensitive to static discha
rge and can be easily damaged by it. We recommend protecting these components with cond
uctive anti-static bags when you store or transport them.
Always use an anti-static strap or wristband and remove electrostatic buildup or dissipate
static electricity from your body before repairing ESDs.
Ensure that soldering irons have AC adapter with ground wires and that the ground wires are
properly connected.
Use only desoldering tools with plastic tips to prevent static discharge.
Properly shield the work environment from accidental electrostatic discharge before opening
packages containing ESDs.
The potential for static electricity discharge may be increased in low humidity environments,
such as air-conditioned rooms. Increase the airflow to the working area to decrease the
chance of accidental static electricity discharges.
1-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
6-1. S/W installation
6-1-1. Required items in order to install S/W
Installation program: Downloader Program (
Mobile Phone
Data Cable
Mobile device specific S/W: Binary files
Settings
※
Odin3 v3.09.exe)
Data Cable : GH39-01710A
6-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6-1-2. S/W Installation Program (Downloader program)
Level 1 Repair
Open up the S/W Installation Program by executing the
"Odin3 v3.10.6.exe"
6-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Loading...
+ 20 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.