Warning! This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to
(the “Phone System”) , is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade
secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not
(and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to
you. All applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Open Source Software
Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser General Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To
obtain the source code covered under the open source licenses, please visit: http://opensource.samsung.com.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR
IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE;
THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT
WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT
OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Modification of Software
SAMSUNG IS NOT LIABLE FOR PERFORMANCE ISSUES OR INCOMPATIBILITIES CAUSED BY YOUR EDITING OF REGISTRY SETTINGS, OR YOUR MODIFICATION OF OPERATING SYSTEM SOFTWARE.
USING CUSTOM OPERATING SYSTEM SOFTWARE MAY CAUSE YOUR DEVICE AND APPLICATIONS TO WORK IMPROPERLY. YOUR CARRIER MAY NOT PERMIT USERS TO DOWNLOAD CERTAIN SOFTWARE, SUCH AS CUSTOM
OS.
SAFE™ (Samsung Approved For Enterprise)
SAFE™: “SAFE™” (Samsung for Enterprise) is a mark for a Samsung device which has been tested against Samsung’s own internal criteria for interoperability with certain third party security-related solutions for MDM and VPN. The
testing includes field testing with local network connection and menu tree testing which tests functionality of the solutions in conjunction with the Samsung device. During the testing, the device is tested with the security solutions to see
if the solutions work with the device as described by the third party security solution providers. The testing, for example, includes field testing with local network connection and menu tree testing which tests functionality of the solutions
in conjunction with the Samsung device. For more information about Samsung’s SAFE™ program, please refer to www.samsung.com/us/safe.
Disclaimer of Warranties: EXCEPT AS OTHERWISE PROVIDED IN THEIR STANDARD END USER LICENSE AND WARRANTY, TO THE FULL EXTENT PERMITTED BY LAW SAMSUNG ELECTRONICS CO., LTD., SAMSUNG
TELECOMMUNICATIONS AMERICA, LLC, AND THEIR AFFILIATES (COLLECTIVELY REFERRED TO HEREIN AS THE “SAMSUNG ENTITIES”) EXPRESSLY DISCLAIM ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, INTEROPERABILITY OR NON-INFRINGEMENT, WITH RESPECT TO INFORMATION TECHNOLOGY SECURITY PROTECTION, SAFE™ DEVICES AND
APPLICATIONS TESTED WITH SAFE™ DEVICES. IN NO EVENT SHALL THE SAMSUNG ENTITIES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES OF ANY KIND WHATSOEVER
WITH RESPECT TO INFORMATION TECHNOLOGY SECURITY PROTECTION, SAFE™ DEVICES OR APPLICATIONS TESTED WITH SAFE™ DEVICES. In addition, information technology security protection will be affected by features
or functionality associated with, among other things the e-mail platform, master data management, and virtual private network solutions selected by the software provider, solution provider or user. Choice of an e-mail, master data
management, and virtual private network solution is at the sole discretion of the software provider, solution provider or user and any associated effect on information technology security protection is solely the responsibility of the
software provider, solution provider or user. For complete statement of limited warranty, please refer to www.samsung.com/us/safe, available on the web and where Samsung smartphones and mobile devices are sold. [051214]
G386T1_UM_English_NH3_TN_090214_F2
Samsung Telecommunications America (STA), LLC
Address:
1301 E. Lookout Drive
Richardson, TX 75082
2014 Samsung Telecommunications America, LLC. Samsung is a registered trademark of Samsung Electronics Co., Ltd.
Do you have questions about your Samsung Mobile Device?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at: www.samsung.com/us/support.
The actual available capacity of the internal memory is less than the specified capacity because the operating system and default applications occupy part of the memory. The available capacity may change when you upgrade the
device.
Nuance®, VSuite™, T9® Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc., or its affiliates in the United States and/or other countries.
ACCESS® and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries.
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered trademarks and are wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card Association.
Openwave® is a registered Trademark of Openwave, Inc.
Google, the Google logo, Android, the Android logo, Google Play, Gmail, Google Mail, Google Maps, Google Music, Google Hangouts, Picasa, Play Newsstand, YouTube and other marks are trademarks of Google Inc.
Wi-Fi is a registered trademark of the Wireless Fidelity Alliance, Inc.
Your phone is equipped with an advanced voice processing chip that delivers clear mobile calls by suppressing background noise, intermittent sounds (like a siren or nearby conversation), and echoes, allowing you to hear and be heard
nearly anywhere.
How Does It Work?
Based on the intelligence of the human hearing system, the technology:
● Captures, evaluates and distinguishes all the sound signals surrounding your phone, and the person you're speaking with.
● Then isolates the primary voice in conversation and filters out the background noise - so the person you're calling hears only your voice, without disturbing background noise.
● Dynamically equalizes and adjusts voice volume to optimize your calling experience, so you can hear clearly and don't need to speak louder to overcome surrounding noise.
The noise suppression technology is built-in and already enabled in your new mobile phone. So it's ready to provide unsurpassed voice clarity with every call.
Legal Information
The online version of the Health/Safety and Warranty guide for your device can be found at:
S Voice Settings ................................................................................. 82
Section 10: Index .............................................................................83
v
Section 1: Getting Started
This section explains how to get started with your phone by installing and charging the battery, installing the
micro SIM card and optional memory card, and setting up your voice mail.
Before using your device for the first time, you’ll need to install and charge the battery and install the micro
SIM card. The micro SIM card is loaded with your subscription details, such as your PIN, available optional
services, and many other features. If desired, you can also install an SD card to store media for use with your
device.
Understanding this User Manual
The sections of this manual generally follow the features of your device.
This manual provides navigation instructions according to the default display settings. If you select other
settings, navigation may be different.
Unless otherwise specified, all instructions in this manual assume you are starting from the Home screen and
using the available keys.
Note: Instructions in this manual are based on default settings, and may vary from your device, depending on
the software version on your device, and any changes to the device’s Settings.
Unless stated otherwise, instructions in this User Manual start with the device unlocked, at the Home
screen.
All screen images in this manual are simulated. Actual displays may vary, depending on the software
version of your device and any changes to the device’s Settings.
Special Text
Throughout this manual, you’ll find text that is set apart from the rest. These are intended to point out
important information, share quick methods for activating features, to define terms, and more. The definitions
for these methods are as follows:
Removing the Battery Cover
The battery, micro SIM card and SD card are installed under the battery cover.
Important! Before removing or replacing the battery cover, make sure the device is switched off.
To turn the device off, hold down the Power/Lock key until the Device options pop up
displays, then tap Power off.
Caution! Do not bend or twist the back cover excessively during installation or removal. Doing so may damage
the cover.
To remove the battery cover:
► Hold the device firmly and locate the cover release latch (1) and carefully remove the cover off the device (2).
Release Latch
● Caution! Brings to your attention information that should be noted to avoid danger or mistakes.
● Important! Points out important information about the current feature that could affect performance.
● Notes: Presents alternative options for the current feature, menu, or sub-menu.
● Tips: Provides quick or innovative methods, or useful shortcuts.
● Warning! Brings to your attention important information to prevent loss of data or functionality, or even
prevent damage to your phone.
Text Conventions
This manual provides condensed information about how to use your phone. To make this possible, the
following text conventions are used to represent often-used steps:
>Arrows are used to represent the sequence of selecting successive options in longer,
or repetitive, procedures.
Example: From the Home screen, tap
Apps >Settings >Bluetooth.
Installing and Removing the SIM card
This device uses a different type of SIM card called a “micro SIM”. Other larger SIM cards will not function or
fit within this slot.
SIM Card Overview
Important! Before removing or replacing the micro SIM card, make sure the device is switched off.
To turn the phone off, hold down the Power/Lock key until the Device options pop up
displays, then tap Power off.
The micro SIM card is loaded with your subscription details such as your telephone number, PIN, available
optional services, and many other features.
Important! The micro SIM card and its information can be easily damaged by scratching or bending, so be
careful when handling, inserting, or removing the card. Keep all SIM cards out of reach of small
children.
Some features on your device (such as Wi-Fi Calling) can be unlocked by using the new micro SIM card.
To use this new micro SIM card, call or contact customer service for more information.
This card contains the necessary information for identifying and authenticating the user to the IMS
(IPMultimedia Subsystem).
Section 1: Getting Started
1
To install the SIM card:
1. Carefully slide the micro SIM card into the SIM card socket until it clicks into place.
Micro SIM Card
2. Make sure that the card’s gold contacts face into the device and that the upper-left angled corner of the
card is positioned as shown.
To remove the micro SIM card:
1. Remove the battery cover.
2. Carefully place your fingernail into the end of the micro SIM slot and push the card slightly out.
3. Carefully slide the card out of the micro SIM card socket.
To remove the microSD Memory Card:
1. Remove the battery cover.
2. Firmly press the card into the slot and release it. The card should pop partially out of the slot.
3. Remove the card from the slot.
4. Replace the battery cover.
Installing the Battery
Before using your device for the first time, install the battery and charge it fully.
Note: If the card is not inserted correctly, the device will not detect it and no service will be available. If this
happens, turn off the device, remove the card, and reinstall the card in the correct orientation.
Installing the microSD Memory Card
Your device supports an optional (external) microSD™ memory cards for storage of media such as music,
pictures, video and other files. The SD card is designed for use with this mobile device and other devices.
Note: This device supports an expandable memory card.
1. Remove the battery cover.
2. Locate the microSD card slot on the inside of the device.
3. Orient the card with the gold strips facing down.
4. Carefully slide the microSD card into the card socket until it clicks into place.
Important! Be sure to align the gold contact pins on the card with the device’s contact pins.
Note: MicroSD cards should be formatted within the Storage menu. Using an older or slow microSD card can
affect camera performance, especially for video recording.
Important! Before removing or replacing the battery, make sure the device is switched off.
To turn the device off, hold down the Power/Lock key until the Device options pop up
displays, then tap Power off.
To install the battery:
1. Slide the battery into the compartment (1) so that the tabs on the end align with the slots at the bottom of the
phone, making sure the connectors align.
2. Gently press down to secure the battery (2).
To remove the battery:
► Grip the battery at the top end and lift it up and out of the battery compartment.
Installing Battery
2
Replacing the Battery Cover
► Position the battery cover over the battery compartment and securely press down around the edges until you
hear clicking.
Important! It is recommended you fully charge the battery before using your device for the first time.
Caution! When replacing the battery cover, do not apply pressure to the screen (“squeeze”) as this can damage
the screen.
Charging the Battery
Your device is powered by a rechargeable Li-ion battery. A wall charger, which is used for charging the
battery, is included with your device. Use only approved batteries and chargers. Ask your local Samsung
dealer for further details.
Before using your device for the first time, you must fully charge the battery.
Charging Head
USB
Cable
Note: If the charger is incorrectly connected, damage to the accessory port will occur therefore voiding the
device’s warranty.
To connect a USB cable to the device:
1. Connect the USB cable to the charging head.
2. Locate the Charger/Accessory jack and insert the USB cable into the appropriate jack.
Note: Verify that the battery is installed prior to connecting the wall charger. If both the wall charger is
connected and the battery is not installed, the handset will power cycle continuously and prevent proper
operation. Failure to unplug the wall charger before you remove the battery, can cause the device to
become damaged.
3. Plug the charging head into a standard AC power outlet. The device turns on with the screen locked and
indicates both its charge state and percent of charge.
Warning! While the device is charging, if the touch screen does not function due to an unstable power supply
unplug the USB power adapter from the power outlet or unplug the USB cable from the device.
4. When charging is finished, first unplug the charger’s power plug from the AC wall outlet, then disconnect
the charger’s connector from the device.
5. When charging is finished, first unplug the charger’s power plug from the AC wall outlet, then disconnect
the charger’s connector from the phone.
Important! If your handset has a touch screen display, please note that a touch screen responds best to a light
touch from the pad of your finger or a non-metallic stylus. Using excessive force or a metallic object
when pressing on the touch screen may damage the tempered glass surface and void the warranty.
Section 1: Getting Started
3
Extending Your Battery Life
Active applications, light levels, Bluetooth usage, and GPS functionality all act to drain your battery. The
following is a list of helpful tips that can help conserve your battery power:
● Reduce the time your backlight stays on.
● Turn Bluetooth off when not in use.
● Turn Wi-Fi off when not in use.
Initial Device Configuration
1. Select a language from the associated field. English is the default language.
Note: If you are visually impaired or have difficulty hearing, tap Accessibility to configure the accessibility
settings.
2. Tap Start and follow the onscreen setup instructions.
● Deactivate your GPS functionality when not needed. Most applications using this function will periodically
query the GPS satellites for your current location; each query drains your battery.
● Do not wait until your battery is completely depleted before charging your device. Repeating this process
of a complete discharge and recharge can over time reduce the storage capacity of any battery.
● Use the Power Saving feature to deactivate some hardware and interface functions.
● Check the Battery use screen to review what features or functions have been consuming your battery
resources.
● Check the Running Services and close any unnecessary applications.
● Use the Task Manager feature to end/shutdown background applications that are still running. These
minimized applications can, over time, cause your device to “slow down”.
● Animated wallpapers use processing power, memory, and more power. Change your Live Wallpaper to a
non-animated Wallpaper gallery or Gallery image.
Switching the Device On or Off
Once the device has been configured, you will not be prompted with setup screens again.
To turn the device on:
► Press and hold Power/Lock until the device switches on.
The device searches for your network and after finding it, you can make or receive calls.
Note: The display language is preset to English at the factory. To change the language, use the Language
menu. For more information, refer to “Language and Input” on page 74.
Note: You may be prompted with a notification that your activation is completed. Enabling Google location
services can drain battery power.
For more information, refer to “Creating a Samsung Account” on page 72.
Note: Read the onscreen Dropbox set up and registration information regarding new services.
3. Enter a unique device name and tap Finish to complete the setup process.
Important! The device name is also used to provide an identification for your device’s Bluetooth and
Wi-Fi Direct names.
4. Read the onscreen Collect diagnostics information.
Note: This software collects only diagnostic data from your device so that customer service technicians can
better troubleshoot issues with your device.
5. Select either More info... (to read additional information) or Close to close the message screen.
Important! Selecting Close only closes the current description screen and does not disable data collection.
To disable data collection, go to Settings > Backup and reset > Collect diagnostics and turn off the
Allow Diagnostics feature. For more information, refer to “Collect Diagnostics” on page 74.
Restarting the Device
1. Press and hold Power/Lock until the Device options screen appears.
2. Tap Restart.
To turn the device off:
1. Press and hold Power/Lock until the Device options screen appears.
2. Tap Power off.
4
Locking and Unlocking the Device
By default, the device screen locks when the backlight turns off.
► Place your finger on the screen and swipe the glass in any of the directions shown unlock the device.
Note: You can choose to configure lock settings to prevent unauthorized use of your device. For more
information, refer to “Security” on page 76.
Voicemail
Setting Up Your Voicemail
Your device automatically transfers all unanswered calls to voicemail, even if your device is in use or turned
off. As soon as your battery is charged and the micro SIM card inserted, activate your voicemail account.
Important! Always use a password to protect against unauthorized access.
For new users, follow the instructions below to set up voicemail:
Note: Voicemail setup may be different depending on your network.
1. From the Home screen, tap Phone and then touch and hold the key until the device dials your
voicemail service.
You may be prompted to enter a password.
2. Follow the tutorial to create a password, a greeting, and a display name.
Accessing Your Voicemail
You can access your Voicemail by either pressing and holding on the keypad, or by using the device’s
Application icon, then tapping the Voicemail application. To access Voice Mail using the menu:
1. From the Home screen, tap Phone and then touch and hold until the device dials voicemail.
Note: Touching and holding will launch the voicemail application.
2. When connected, follow the voice prompts from the voicemail center.
Accessing Your Voicemail From Another Phone
1. Dial your wireless phone number.
2. When you hear your voicemail greeting, press the asterisk key on the phone you are using.
3. Enter your passcode.
Section 1: Getting Started
5
Section 2: Understanding Your Device
This section outlines key features of your device. It also describes the device’s keys, screen and the icons
that display when the device is in use.
Features of Your Device
Your device is lightweight, easy-to-use and offers many significant features. The following list outlines a few of
the features included in your device.
● Touch screen with virtual (onscreen) QWERTY keyboard
● Brilliant 4.5" qHD screen (960x540)
● Quad-core processor
● 4G LTE and High Speed Packet Access Plus (HSPA+).
● Android 4.4.2, Kit Kat OS Platform
● Galaxy Gear™ compliant. For a list of compatible smartphones, please visit:
www.samsung.com/us/galaxygearsupport.
● Smart Switch™ compliant. For more information, see www.samsungsmartswitch.com
● Support for Motions and Gestures.
● Wi-Fi® Capability @ both 2.4GHz and 5GHz
● Apps available to download from the Google Play™ Store and Samsung Apps
● 5 Megapixel Camera and Camcorder with autofocus with smart stabilization and LED flash.
● 1.3 Megapixel Front Facing camera for Video Chat
Front View
7
16
15
14
1
13
12
2
11
3
10
● S-Beam file transfer technology
● NFC-compatible
● Bluetooth 4.0 enabled
● Full Integration of Google Mobile™ Services (Gmail, Google Maps, Google Hangouts, etc.)
● Multiple Messaging Options: Text/Picture/Video Messaging and Google Hangouts
● Corporate and Personal Email
● Music Player with multitasking features
● Pre-loaded e-reader applications such as: Play Books™ and Play Newsstand
● Assisted GPS Navigation
● Expandable memory slot
● Mobile HotSpot and USB Tethering-capability
● Video Chat via Google Hangouts
● Google Play™ Music
● Wi-Fi® Calling
™
™
4
59
76
8
1. Volume key allows you to adjust the ringer volume in standby mode (with the phone open) or adjust the voice
volume during a call. When receiving an incoming call:
● Pressing the volume key down mutes the ring tone.
2. Widgets are self-contained onscreen applications (not shortcuts). These can be placed onto any of the
available screens (Home or extended).
3. Application icons are shortcuts to your favorite applications on the Home screen.
4. Primary Shortcuts allow quick access to important features such as Phone, Contacts, Messages, Internet,
and Apps.
5. Recent key displays a list of recently opened apps. Press and hold to access the Home screen options
menu (page 10).
● Tap to go to the Task manager.
● Tap
6. Home key displays the Home screen when pressed. Press and hold to launch Google search.
to delete the record of all recently used applications.
6
7. Microphones are used during phone calls and allow other callers to hear you clearly when you are
speaking to them. There are two microphones on the device:
● Bottom microphone: used during handset mode.
● Top microphone: used while an active call is in the speaker phone mode and assists in noise cancellation
(2 microphone solution).
8. USB Power/Accessory connector allows you to connect a power cable or optional accessories such as a
USB/data cable.
9. Back key redisplays the previous screen or clears entries.
10. Home screen indicator shows which Home screen is presently displayed.
11. Google Quick Search bar provides a shortcut to Google Search that allows you to search for items on the
Internet.
12. Power/Lock key ends a call or switches the phone off and on. Press and hold for two seconds to:
● Access the audio modes for the device. Tap an on-screen selection (Mute, Vibrate, or Sound).
Back View
123
6
● Turn the device On or Off (
● Emergency mode (
Important! Emergency mode is primarily intended to be a battery saving mode that provides access to limited
functionality. For Emergency functionality, including notification of emergency contacts with GPS
location and images, see “Safety Assistance” on page 75.
13. Indicator icons shows the information needed to operate your phone, such as the received signal strength,
phone battery level, time, unread Emails, missed calls, etc.
14. Front Facing Camera allows you to take pictures while facing the screen and allows you to video
conference.
15. Sensors lets you use the detect proximity.
The Proximity Sensor detects how close an object is to the surface of the screen. This is typically used to
detect when your face is pressed up against the screen, such as during a phone call.
● While talking on the phone, the sensor detects talk activity and locks the keypad to prevent accidental key
presses.
16. Receiver allows you to hear the other caller.
).
), activate/deactivate Airplane mode (), or Restart the device ().
45
1. Flash is used to take photos in low-light conditions.
2. microSD Card Slot (internal) allows you use a microSD card to expand the memory of your device.
5. External speaker allows you to hear ringers, music, and other sounds offered by your phone.
6. Headset jack allows you to connect a hands-free headset so you can listen to music.
Section 2: Understanding Your Device
7
Status Bar
The Status Bar shows information about the connection status, signal strength, battery level, and time, and
displays additional notifications information.
This list identifies the icons you see on your device’s display screen:
Shows your current battery only has up to 4% power remaining and will soon
shutdown. (Charge: ~4% - 1%) .
Displays when connected to the EDGE network.
Indicator Icons
This list identifies the symbols you’ll see on your device’s display and Indicator area:
Note: Some Notification icons can be hidden manually by toggling the status of the Notification panel function.
For more information, refer to “Accessing Additional Screen Functions” on page 10.
Displays your current signal strength. The greater the number of bars, the
stronger the signal.
Indicates that the Airplane Mode is active. You cannot send or receive any
calls or access online information.
Indicates there is no signal available.
Displays when there is no SIM card in the phone.
Displays when there is a system error or alert.
Displays to indicate a security warning. You are prompted to set a screen lock
password.
Displays when a call is in progress. Icon is displayed in the Status bar area.
Displays when connected to the 3G network.
Displays when connected to the HSPA+ network.
Displays when your phone is communicating with the 4G LTE network.
Displays when the Download Booster feature is enabled and communicating.
Displays when the phone has detected an active USB connection and is in a
USB Debugging mode.
Displays when there is a new text message.
Displays when an outgoing text message has failed to be delivered.
Displays when an incoming text message content has failed to be
downloaded.
Displays when there is a new voicemail message.
Displays when a call is on hold. Icon is displayed in the Status bar area.
Displays when an active call is routed through a Bluetooth headset. Icon is
displayed in the Status bar area.
Displays when you have missed an incoming call.
Displays when you device is set to automatically reject all incoming calls.
The All numbers option is enabled from within Settings >Call >Call rejection>Auto reject mode menu.
Displays when the speaker phone is on. Icon is displayed in the Status bar
area.
Displays when the microphone is muted. Icon is displayed in the Status bar
area.
Displays when Call forwarding is set to Always forward. Displayed in the
Status bar when the current call is minimized.
Displays your current battery charge level. Icon shown is fully charged.
Displays your battery is currently charging.
Displays when there is a new visual voicemail message.
Displays in the notifications window when there is a new Email message.
Displays in the notifications window when there is a new Gmail message.
Displays when the user is prompted with a Lookout Security notification.
Displays when the time and date for a Calendar Event has arrived. For more
information, refer to “Calendar” on page 44.
Displays when an alarm is set. For more information, refer to “Setting an Alarm”
on page 45.
Displays when the device is in Silent mode. All sounds except media and
alarms are silenced, and Silent mode is set to Vibrate. For more information,
refer to “Silent mode via Device Options Screen” on page 68.
Displays when the device is in Silent mode. All sounds are silenced, and
Silent mode is set to Mute.
Displays when data synchronization and application sync is active and
synchronization is in progress for Gmail, Calendar, and Contacts.
Displays when the Blocking mode feature is active. For more information, refer
Displays your current battery charge level is very low (Charge: ~11% - 5%).
to “Blocking Mode” on page 71.
8
Displays when Bluetooth technology is active and enabled.
Displays when the external SD card (internal microSD) has been disconnected
(unmounted) from the phone and is now ready for either removal or formatting.
Displays when the Bluetooth technology is active and communicating with an
external device.
Displays when the an outbound file transfer is in progress.
Displays when a file or application download is in progress.
Displays when a screen capture has been taken and stored in the clipboard.
Displays when your device is connected being used to control streaming
media and is connected to a Digital Living Network Alliance (DLNA) certified
devices.
Displays when your device is currently sharing/streaming media to paired
device using the Samsung Link application.
Displays when updates are available for download.
Displays when a Play Store download has completed.
Displays when Wi-Fi is connected, active, and communicating with a Wireless
Access Point (WAP).
Displays when the External SD card is being prepared for mounting to the
device. This is required for communication with the External SD card.
Displays when the microSD card has been improperly or unexpectedly
removed.
Displays when storage within either the internal location or the external SD
card has reached its capacity. It is recommended you either move files off or
delete them to make additional room.
Displays when the Power saving alert notification has been activated. You are
then prompted to view your current battery level.
Displays when Near Field Communication (NFC) has been activated.
The Smart stay feature is activated. The screen stays on as long as you are
looking at it.
Displays when TTY device has been inserted.
For more details on configuring your device’s settings, see “Section 9: Changing Your Settings” on page 61.
Displays when Wi-Fi is active and there is an available open wireless network.
Displays when Wi-Fi Direct is communicating with another compatible device.
Displays to alert you to disable an active Wi-Fi Direct connection if not in use to conserve battery power.
Displays when the USB Tethering mode is active and communicating. For
more information, refer to “USB Tethering” on page 59.
Displays when Wi-Fi is being used as a Mobile HotSpot feature is active and
communicating. For more information, refer to “Mobile HotSpot” on page 59.
Displays when the Wi-Fi calling feature is active. Minutes used while
connected to the Wi-Fi network count against available rate plan minutes.
Displays when the Wi-Fi calling feature is active and you are using it with
within your current active call.
Displays when there is an error in the use or 911 registration of the Wi-Fi
Calling feature.
Displays in the notifications window when there are too many onscreen
notification icons to display. Tap to show more notifications.
Tap to select a text input method.
Displays when your device’s GPS Location feature is on and communicating.
Section 2: Understanding Your Device
9
Home Screen
The Home screen is the starting point for using the applications on your device. There are initially seven
available panels, each populated with default shortcuts or applications. You can customize each of these
panels.
Notification Panel
The Notification area indicates new message events (data sync status, new messages, calendar events,
call status, etc). You can expand this area to display the Notification screen that provides more detailed
information about the current onscreen notification icons.
Home Screen Options
In previous devices, pressing the hardware Menu key from the Home screen yielded on- screen options.
In this device those same options are now available by touching and holding an empty screen area.
1. Navigate to an available screen containing an open area.
2. Touch and hold an empty area.
3. Select an available home screen option from the Edit Home screen option page below:
● Wallpapers allows you to assign the current wallpaper for the Home screen, Lock screen, or Home and lock
screens.
● Widgets allows you to quickly access the Widget tab where you can then drag a selected widget to an
available area on a selected screen.
● Home screen settings allows you to configure your Home screen to provide access to the My Magazine’s
feature and enable/disable Transition effects.
● Remove tab allows you to add or remove extended screens from your device. You can have up to six
extended screens (one Home screen and six Extended screens).
Home ScreenDelete
1. Touch the Status bar to reveal the Notifications tab, and then drag the tab to the bottom of the screen (1) to
open the Notifications panel.
2. Tap a notification entry to open the associated application (2).
Note: S Finder and Quick connect can quickly be accessed from the top area of the main Notifications screen.
WallpapersHome Screen
Widgets
Settings
Clearing Notifications
1. In a single motion, touch and drag the Status bar down to the bottom of the screen to open the Notifications
panel.
2. Tap Clear. The notifications are cleared from the panel.
Accessing Additional Screen Functions
In addition to notifications, this screen also provides quick and ready access to device functions. These can
be quickly activated or deactivated.
Scrolling across a horizontal list of functions has been enhanced with an accessible Grid view.
Note: You can select the function buttons you see at the top of the Notifications panel.
Only 5 buttons are shown at any one time. The Grid view is the only way to view all functions.
To activate the Grid view:
► From the Notification panel, tap Open Grid view to display additional functions.
To minimize the Grid view:
► From the Notification panel, tap
Close Grid view to show only your primary functions.
10
Customizing the Notifications Panel
To customize the panel via the Notifications area:
1. From the Notification screen, tap Open Grid view to display additional functions.
2. Tap Edit then locate the Notifications panel area located at the bottom of the Notifications panel
screen.
3. In a single motion, touch and hold a desired function then drag it to the ACTIVE BUTTONS area (those
buttons that appear in the Notifications area).
To customize the panel via the Settings menu:
1. From the Home screen, tap Apps > Settings > Notification panel.
2. In a single motion, touch and hold a desired function then drag it to the ACTIVE BUTTONS area.
Customizing the Screens
You can customize the Home screens (panels) to display the Widgets, Shortcuts, Folders, or Wallpapers.
For example, one screen could contain the My Magazine page, app shortcut and other forms of media, while
another screen might contain communication apps such as Gmail.
You can customize your Home screen by doing the following:
● Customization of the Toolbox
● Adding, Deleting, and Rearranging screens
Adding and Deleting Screens
Your device comes with five (default) screens and up to seven total. You can delete these screens and then
add them back later.
Note: These screens can be deleted and re-arranged.
Important! Your device can only contain at most seven screens and at least one screen.
To add a screen:
1. Navigate to an available screen containing an open area, then press and hold Recent until the Edit Home
screen option page appears (page 10).
2. Scroll to the far right of the available screens and tap Add screen. The newly added screen appears
as the last page.
3. Press Home to return to the main Home screen.
To delete a screen:
1. Navigate to an available screen containing an open area, then press and hold Recent until the Edit Home
screen option displays (page 10).
2. Scroll across the available screens, then drag the undesired screen up to the Remove tab.
3. Press Home to return to the main Home screen.
● Assigning a New Home screen
● Adding and Removing Primary Shortcuts
● Sharing Application Information
● Managing Shortcuts
● Adding and Removing Widgets
● Changing the Background (Wallpapers)
Customizing the Toolbox
For more information, refer to “Toolbox” on page 70.
Activating the Toolbox feature displays an onscreen button that provides quick access to a set of five userdefined applications.
Important! There can only be at most five applications assigned to the quick access Toolbox button.
To activate the Toolbox feature:
1. From the Home screen, tap Apps > Settings > Toolbox.
2. In a single motion touch and slide the Toolbox slider to turn it on.
To customize the Toolbox applications:
1. From the active Toolbox screen, tap Edit.
2. Place a check mark alongside up to five applications. These will be quickly accessible via the on-screen
button.
3. Tap Save once you have completed the assignment of your applications.
Rearranging the Screens
1. Navigate to the Edit Home screen option page (page 10).
2. Touch and hold a screen and then drag it left or right into its new location. Left most is screen position #1
and the right most is screen is the last screen.
Assigning a New Home Screen
1. Navigate to the Edit Home screen option page (page 10).
2. Tap to assign an existing screen as the new Home screen. The new Home screen is highlighted and
indicates the Home screen icon at the top of the selected screen.
Managing Shortcuts
Note: To move a shortcut from one screen to another, you must carefully touch and hold the shortcut and slowly
drag it to the edge of the screen. As the shortcut turns light blue, you can begin to move it to the adjacent
screen. If this does not work, delete it from its current screen. Activate the new screen and then add the
selected shortcut.
To add a shortcut from the Applications screen:
1. From the Home screen, select a screen location for your new shortcut by scrolling across your available
screens until you reach the desired one.
2. Tap Apps to reveal all your current available applications. By default, applications are displayed as
an Alphabetical grid.
3. Scroll across the screens and locate your desired application.
4. Touch and hold the onscreen icon. The new shortcut then appears to hover over the current screen.
5. While still holding the onscreen icon, position it on the current screen. Once complete, release the screen
to lock the shortcut into its new position.
Section 2: Understanding Your Device
11
To delete a shortcut:
1. From the Home screen, touch and hold the desired shortcut. This unlocks it from its location on the current
screen.
2. Drag the shortcut over the Remove tab and release it.
Adding and Removing Primary Shortcuts
Note: You can change any of your primary shortcuts with the exception of the Apps shortcut.
To remove a primary shortcut:
► From the Home screen, touch and hold the primary shortcut you want to replace, then drag it to an empty
space on any available screen. The primary shortcuts are now updated to show an empty slot.
To insert a new primary shortcut:
1. From the Home screen, tap Apps.
2. Locate your desired application, then touch and hold the onscreen icon to position it in the desired
primary shortcut location. The new primary shortcut will now appear on both the Home and Extended
screens.
Adding and Removing Widgets
Widgets are self-contained applications that can be placed on any screen. Unlike shortcuts, widgets appear
as applications.
To add a Widget:
1. Navigate to a target screen containing an available open area, then press and hold Recent until the Edit
Home screen option appears (page 10).
2. Tap Widgets pages and then locate a desired Widget.
3. Touch and hold an available Widget until it detaches from the screen.
4. While still holding the Widget, scroll over the location of the available screen and let go of the Widget to
place it in the desired location.
Managing Wallpapers
Wallpapers consist of either Gallery images (user taken), Static Wallpaper gallery images (default wallpapers),
or Live wallpapers (animated backgrounds).
Note: Selecting animated Live wallpapers will require additional battery power.
To change the current Home screen wallpaper:
1. Navigate to an available screen containing an open area.
2. Press and hold Recent to launch the Edit Home screen option page.
3. Tap Wallpapers g Home screen.
4. Scroll across the available wallpaper images and select a Wallpaper type:
● Tap More images to select from a user image stored in the camera image gallery, crop the image, and tap
Done.
● Tap a wallpaper to select it, and then tap Set wallpaper.
Note: Wallpapers supports the following image types: JPEG, PNG, GIF, BMP, and WBMP.
To change Wallpapers from Settings Menu:
1. From the Home screen, tap Apps > Settings > Wallpaper.
2. Choose from Home screen, Lock screen, or Home and lock screens.
Note: The Home and lock screens is an option that allows you to change both screens at the same time.
3. Select a wallpaper image and tap Done or Set wallpaper.
To change the current Lock screen wallpaper:
1. From the Home screen, tap Apps > Settings > Wallpaper > Lock screen.
2. Select a wallpaper image and tap Done or Set wallpaper.
To remove a Widget:
1. Touch and hold a Widget until it unlocks from the current screen.
2. Drag the widget over the Remove tab and release it.
● As you place the Widget into the remove/trash, both items turn red.
● This action doesn’t delete the Widget, it just removes it from the current screen.
To place a widget onto a different screen:
1. Touch and hold the widget until it becomes transparent.
2. Slowly drag it past the edge of the screen until the adjacent page appears highlighted and it then snaps
onto the new page.
3. Drag the widget to its desired position on the new screen.
4. Repeat these steps to continue moving it to other screens.
12
Screen Navigation
Using the touch screen display and the keys, you can navigate the features of your device and enter
characters. The following conventions are used in this manual to describe the navigation action in the
procedures.
Menu Navigation
You can tailor the device’s range of functions to fit your needs using both menus and applications. Menus,
sub-menus, and features are accessed by scrolling through the available on-screen menus. Your device
defaults with seven screens.
Important! This device no longer uses a hardware menu button. This function has been moved to an on-screen
Menu button.
Navigating Through the Screens
The following terms describe the most common hardware and onscreen actions.
● Press and hold: Pressing relates to use of the hardware keys and buttons to select or activate an item. For
example: press the Navigation key to scroll through a menu. Some buttons and keys require you to press
and hold them to activate a feature, for example, you press the Lock key to lock and unlock the device.
● Tap: Use a brief touch to select items on the display or to enter text on the virtual QWERTY keyboard. For
example: touch an Application icon to open the application. A light touch works best.
● Touch and hold: Touch and hold an icon or key to open the available options, or to access a pop-up
menu. For example: touch and hold from the Home screen to access a menu of customization options.
● Flick: Move your finger in lighter, quicker strokes than swiping. This finger gesture is always used in a
vertical motion, such as when flicking through contacts or a message list.
● Swipe or slide: Quickly drag your finger vertically or horizontally across the screen. This allows you to
move the area of focus or to scroll through a list. For example: slide your finger left or right on the Home
screen to scroll among the seven panels.
● Drag: Press and hold your finger with some pressure before you start to move it. Do not release your
finger until you have reached the target position.
● Rotate: Automatically change the screen orientation from portrait to landscape by turning the device
sideways. For example: rotate to landscape orientation when entering text, to provide a larger keyboard,
or when viewing web content to minimize scrolling.
● Pinch: “Pinch” the screen using your thumb and forefinger to zoom out when viewing a picture or a Web
page. (Move fingers inward to zoom out.)
Navigating Through the Application Menus
There are three default Application Menu screens available. As you add more applications from the Play
Store, more screens are created to house these new apps.
1. From the Home screen, tap Apps. The first Application Menu screen displays.
● To close the Applications screen, press Home.
2. Sweep the screen to access the other menus.
3. Tap any of the onscreen icons to launch the associated application.
Using Sub-Menus
Sub-menus are available from within most screen and applications.
1. From a screen with an available menu option, tap Menu. A sub-menu displays on the screen.
2. Tap an available onscreen option.
Using Context Menus
Context menus (also called pop-up menus) contain options that apply to a specific item on the screen. They
function similarly to menu options that appear when you right click your mouse on your desktop computer.
► Touch and hold an item onscreen to open its context menu.
Entering Text
Your device comes equipped with an orientation detector that can tell if the phone is being held in an upright
(Portrait) or sideways (Landscape) orientation. This is useful when entering text.
Your device also provides several onscreen keypad text entry options to make the task of text entry that much
easier.
Text Input Methods
There are two text input methods available:
● Google voice typing: provides a voice to text interface.
● Spread: “Spread” the screen using your thumb and forefinger to zoom in when viewing a picture or a Web
page. (Move fingers outward to zoom in.)
Note: These screens can be re-arranged in any desired order. For more information, refer to “Customizing the
Screens” on page 11.
● Motion Navigation and Activation: The device comes equipped with the ability to assign specific functions
to certain device actions that are detected by both the accelerometer and gyroscope.
Note: Motion must be enabled for this feature to be active. For more information, refer to “Motions and
Gestures” on page 72.
● Samsung keyboard (default): an onscreen QWERTY keyboard that can be used in both portrait and
landscape orientation.
The onscreen QWERTY keypad works the same in both portrait and landscape mode.
Selecting the Text Input Method
The Text Input Method can be assigned from within one of two locations:
Settings Menu:
► From the Home screen, tap Apps >Settings > Language and input >Default and select an
input method.
Text Input field:
1. From a screen where you can enter text, in a single motion, touch and drag the Status bar down to the bottom
of the screen to open the Notifications screen.
2. Tap Choose input method and select an available input method.
Section 2: Understanding Your Device
13
Using the Google Voice Typing
This feature uses Google voice recognition to convert your spoken words into onscreen text.
You can use your voice to enter text using the Google Voice typing feature.
1. From the keyboard, touch the top of the screen and drag it down to display your notification panel.
2. Tap Choose input method > Google voice typing.
3. At the Listening prompt Speak now, speak clearly and distinctly into the microphone.
The text is displayed in the message as you are speaking.
For more detailed information on configuring Google Voice Typing settings, see “Configure Google Voice
Typing” on page 75.
4. Tap Done when you are finished.
– or –
Tap Resume to resume recognition.
Note: The feature works best when you break your message down into smaller segments.
Using Google Voice Typing
1. From a screen where you can enter text, in a single motion, touch and drag the Status bar down to the bottom
of the screen, then select Choose input method >Google voice typing. The virtual keyboard is then
removed and all subsequent input to done via the microphone as text to speech.
2. Speak into the device’s microphone and watch your text being entered onscreen.
3. If the text is incorrect, tap DELETE.
Using the Samsung Keyboard
This QWERTY keyboard can be used to enter text in either a Portrait or landscape orientation. The only
difference between the two orientations are the sizes of the keys.
From a screen where you enter text, rotate your phone counterclockwise to a landscape orientation. The
onscreen QWERTY keyboard displays.
The Samsung Keyboard
This device has a built-in, QWERTY keypad (portrait mode) or keyboard (landscape mode). Using the
QWERTY keypad/ keyboard, you can type letter, numbers, punctuation, and other characters.
To use the Samsung keyboard you must first configure the settings to default to the Samsung keyboard.
1. From the Home screen, tap Apps > Settings > Language and input > Default > Samsung
keyboard.
– or –
From a screen where you can enter text, in a single motion, touch and drag the Status bar down to the
bottom of the screen, then select Choose input method >Samsung keyboard.
2. The virtual keyboard is then assigned to the Samsung keyboard configuration for all subsequent text input.
Text input fieldShift key
14
Input Options/
Indicator
For more detailed information on configuring Samsung Keyboard settings, see “Samsung Keyboard Settings”
on page 74.
Settings
SendDeleteCurrent ModeInput Mode
Entering Text using Different Input Options
Although the default text input method with the Samsung keyboard is to use the onscreen keys you have
other options.
Using ABC Mode in Samsung Keyboard
1. From a screen where you can enter text, tap the text input field to reveal the onscreen keyboard.
2. Tap
to configure the keyboard for ABC mode. Once in this mode, the text input type shows
ABC
ABC
Sym
.
Note: To access settings, touch and hold the Input Methods button , then tap Settings then select it
from the available options.
1. From within an active message, tap the text input field to reveal the onscreen keyboard.
2. Tap Input Methods to use the default Voice typing input method to convert your spoken words to
onscreen text.
– or –
Touch and hold to select from other input methods such as:
● Voice to text: Launch the device’s Google Voice typing application to covert spoken words into onscreen
text.
● Clipboard: Launch the device’s clipboard area from where you can select a current clipboard item to place
in your current message.
● Settings: Access the Samsung keyboard settings menu.
● Emoticons: Insert an available emoticon from among several different sets.
Changing the Text Input Mode in Keyboard
1. From a screen where you can enter text, tap the text input field to reveal the onscreen keyboard.
2. With Samsung keyboard as your text entry method, select one of the following text mode options:
ABC
ABC
● Abc
displays
● Symbol/Numeric
keyboard. In this mode, the text mode button displays
There are up to 2 available pages of numeric symbols available by tapping
: to use alphabetic characters from the onscreen keyboard. In this mode, the text mode button
.
Sym
Sym
: to enter numbers by pressing the numbers selecting them on the onscreen
ABC
.
ABC
.
1/2
Note: After typing an initial uppercase character, the key changes to and all letters that follow are in
lower case.
3. Enter your text using the onscreen keyboard.
— If you make a mistake, tap to erase a single character. Touch and hold to erase an entire
word.
4. Tap Send to deliver the message.
Using Symbol/Numeric Mode
Use the Symbol/Numeric Mode to add numbers, symbols, or emoticons. While in this mode, the text mode
key displays
1. From a screen where you can enter text, tap the text input field to reveal the onscreen keyboard. Rotate the
phone counterclockwise to a landscape orientation, if desired.
2. Tap
Sym
Once in this mode, the text input type shows
3. Tap a number, symbol, or emoticon character.
4. Tap
ABC
ABC
To enter symbols:
1. Tap
Sym
2. Tap the appropriate symbol key.
– or –
1/2
Tap
● The first number on this key indicates which page (1 or 2) of additional characters is active.
.
ABC
ABC
to configure the keyboard for Symbol mode.
ABC
ABC
.
to return to ABC mode.
to configure the keyboard for Symbol mode.
button to cycle through additional pages.
Note: After typing an initial uppercase character, tap to toggle capitalization.
All lowercase
Displays when the next character is entered in lowercase.
Initial Uppercase
Displays when the first character of each word is entered as uppercase but all
subsequent characters are lowercase.
All Uppercase
Displays when all characters will be entered as uppercase characters.
By default, the first letter of a new entry is capitalized and the following letters are lowercased. After a
character is entered, the cursor automatically advances to the next space.
Section 2: Understanding Your Device
15
Section 3: Call Functions and Contacts List
Call
This section describes features and functionality associated with making or answering calls, and the Contacts
list, which is used to store contact information.
Displaying Your Phone Number
► From the Home screen, tap Apps >Settings > About device >Status. Your phone number
displays in the My phone number field.
Note: The device’s Settings menu can also be activated by pressing Home and then tapping Apps
> Settings.
Making a Call
You can store phone numbers that are regularly used to the SIM card or to the device’s memory. These
entries are referred to as the Contacts list.
1. From the Home screen, tap Phone.
2. Enter the phone number and then tap Call.
3. If you make a mistake while dialing, tap Delete to clear the last digit.
– or –
Touch and hold Delete to clear the entire sequence.
Note: When you activate the Auto redial option from within the Phone > Menu > Settings > Call >
Additional settings menu, the device automatically redials up to 10 times when the person does not
answer the call or is already on the phone, provided your call is not sent to voicemail.
Note: If your screen goes black during your interaction with the device (launching Keypad, etc.), you might be
accidentally swiping over the front sensors.
Quick Dialing a Number from the Contacts List
1. From the Home screen, tap Apps > Contacts.
2. Locate a contact from the list and in a single motion, touch and drag your finger over the number by going
to the right. This action places a call to the recipient.
Running a Call in the Background
If you exit the current call screen and return to the Home screen, you are visually notified that you are still on
an active call by the phone icon within the Status bar.
This is the best way to stay on your current call and do something else (multi-task) such as access the
Contacts list, view a recent email, locate a picture, etc.
► Tap the onscreen Reactivate Call button to return to the currently active call.
Reactivate Call
Ending a Call
► Briefly tap End Call to end the call.
Note: To redial a recent number, tap
entry and tap Call.
Ending a Call from the Status Bar
1. From an active call, you can launch a separate application or return to the Home screen. The current call is
kept active in the background.
2. Tap the Status bar to reveal the Notifications tab, and then drag the tab to the bottom of the screen to
open the Notifications panel.
3. Tap End to end the currently active call.
Making Emergency Calls
If you do not have a SIM card installed the first time you turn on the phone, the Insert SIM card to make calls
message displays and an animated tutorial shows you how to install the SIM card.
Without a SIM card, you can only make an emergency call with the phone; normal cell phone service is not
available.
Making an Emergency Call Without a SIM card installed
1. Tap Emergency call from the onscreen display to make an emergency call.
2. Enter 9-1-1 and tap Call. Complete your call. During this type of call, you will have access to the
Speaker mode, Keypad, and End Call features.
Note: Selecting Location consent may drain battery power.
3. Tap End call to exit this calling mode.
In Call Notification
at the end of the call or locate the number from the Logs list, tap the
16
Making an Emergency Call With a SIM card installed
The Emergency calling mode makes redialing an emergency number a 1-tap process. Before you can resume
normal calling operations, you should first exit this mode.
Answering a Call
When somebody calls you, the device rings and displays the incoming call image. The caller's phone number,
picture, or name if stored in Contacts List, then displays.
1. Swipe the Lock screen to unlock the device.
2. From the Home screen, tap Phone.
3. Enter the emergency number (ex: 911) and then tap Call.
4. Complete your call. During this type of call, you will have access to the Speaker mode, Keypad, and End
Call features.
Note: This mode can drain your battery power more rapidly than a normal calling mode.
5. At the Emergency Callback screen, follow the on-screen instructions.
Dialing Options
When you enter numbers on the Keypad, you will see three
onscreen options.
From the keypad screen, use one of the following options:
● Voicemail () to access your Voicemail service.
● Call () to call the entered number.
● Delete () to delete digits from the current number.
To view additional dialing options:
► After entering a number, tap Menu.
● Add 2-sec pause: Insert a two-second pause to enter a 2-second delay within a number string (the phone
continues dialing after 2 seconds without any additional keys being pressed.
Tip: You can create pauses longer than two seconds by entering multiple 2 second pauses.
Recent activity
Reject the call
Answer the call
Respond with an
outgoing message
Pressing the Volume down button mutes the ringer.
If the incoming call is from a number stored in your Contacts, the entry’s name is displayed. You may also see
the caller’s phone number, if available.
● Add wait: Insert a hard pause within the number string (the phone waits for your input). A wait requires that
any consecutive numbers be manually sent by tapping Yes.
● Add to Contacts: Add the current number to either a new or existing Contacts entry.
● Send message: Send the current caller a text message while still maintaining the current call active.
● Speed dial: Access the Speed dialing setting menu where you can assign a speed dial location to a current
Contacts entry.
● Settings: Provide you access to the Phone settings screen.
● Help: Available onscreen help regarding calling features.
Managing Reject Calls
This feature allows you to categorize both known and unknown callers as rejected contacts. These Contacts
are then added to your Rejection list which can be managed for individual entries from within the Contacts list
or as a whole from the Call rejection screen.
1. From the Home screen, tap Phone.
2. Tap Menu and then tap Settings > Call > Call rejection.
3. Tap the Auto reject mode field to configure your automatic rejection settings. Rejected calls are routed
automatically to your voicemail. Choose from:
● Off: Disables the auto rejection feature.
● All incoming calls: Enables the features for all known and unknown numbers, including those contacts that
are not assigned to the rejection list.
● Auto reject numbers: Automatically rejects all entries assigned to the Reject list/Blacklist.
Section 3: Call Functions and Contacts List
17
Adding numbers to the rejection list
Entries can be added to the list via either the Contacts menu or via the Auto reject list menu. The Contacts
menu option assigns all numbers for an individual as rejected. The Auto reject list allows to assign individual
numbers.
To assign multiple numbers as rejected via Contacts:
1. From the Home screen, tap Apps > Contacts.
2. Locate an entry and tap it to open the Contact Overview Screen (page 26).
3. Tap Menu > Add to reject list. All phone numbers associated with this entry are then added to the
reject list.
To assign single number as rejected via Auto reject list:
1. From the main Call settings page, tap Call rejection g Auto reject list.
2. Tap Create and either enter the phone number or select a Contact from your Logs or Contacts list.
3. Tap Save to complete the assignment.
International Calls
1. From the Home screen, tap Phone and then touch and hold until
on-screen.
2. Use the onscreen keypad to enter the country code, area code, and phone number.
3. If you make a mistake, tap Delete once to delete a single digit.
– or –
Touch and hold Delete to delete all digits.
4. Tap Call.
the device shows “+”
Wait Dialing
Inserting a Wait into your dialing sequence means that the phone waits until it hears a dial tone before
proceeding with the next sequence of numbers.
● Wait sends the next set of numbers only after tapping Yes. This is indicated in the number string as a
semicolon (;).
Note: Do not add multiple Waits (;) to a number string as this will continue to prompt you after each sequence.
1. From the Home screen, tap Phone and use the onscreen keypad to enter the phone number.
2. Tap Menu > Add wait. This feature causes the phone to require your acceptance before sending the
next set of entered digits.
3. Tap Call.
4. Once prompted to Send the following tones?, tap Yes to dial the remaining digits.
Redialing the Last Number
The device stores the numbers of the calls you’ve dialed, received, or missed if the caller is identified.
To recall any of these numbers:
1. From the Home screen, tap Phone.
2. Tap the Logs tab to display the list of recent calls.
3. Tap the name/number and tap Call.
Speed Dialing
Once you have stored phone numbers from your Contacts List, you can set up to 99 speed dial entries (2-
100) and then dial them easily whenever you want, simply by touching the associated numeric key.
Pause Dialing
You can dial or save phone numbers with pauses for use with automated systems, such as voicemail or
financial phone numbers.
● 2-Second Pause: Automatically sends the next set of numbers after a two-second pause. This is indicated
in the number string as a comma (,).
1. From the Home screen, tap Phone and use the onscreen keypad to enter the phone number.
2. Tap Menu > Add 2-sec pause. This feature adds an automatic two-second pause.
3. Use the keypad to enter the additional numbers that will be dialed automatically after the second pause.
Tip: You can create pauses longer than two seconds by entering multiple 2 second pauses.
4. Tap Call.
Note: Speed dial location #1 must be reserved for Voicemail use.
Setting Up Speed Dial Entries
Important! Speed dial location #1 is reserved for Voicemail. No other number can be assigned to this slot.
1. From the Home screen, tap Phone > Keypad tab.
2. Tap Menu > Speed dial. The Speed dial screen displays a virtual list of locations with the numbers
2 through 100.
3. Tap an unassigned number slot.
4. Tap a contact and select a number to assign it to the speed dial location. The selected contact number/
image is displayed in the speed dial number box.
Removing a Speed Dial Entry
1. From the Speed dial screen, tap an entry and select Remove entry.
2. Press Back to return to the previous screen.
18
Changing a Speed Dial Entry Order
1. From the Speed dial screen, locate your desired slot.
2. Delete an existing entry and replace the now empty location with an existing Contacts entry.
3. Press Back to return to the previous screen.
Making a Call Using Speed Dial
You can assign a short cut number to a phone number in the Contacts List for speed dialing.
Placing a Call on Hold
You can place the current call on hold whenever you want. If your network supports this service, you can also
make another call while a call is in progress.
To place a call on hold:
1. From the currently active call, tap Menu > Hold to place the current call on hold.
2. From the currently active call, tap Menu > Resume call to activate the call that is on hold.
1. From the Home screen, tap Phone.
2. Touch and hold a previously created speed dial location (numbers 2-100, or 1 if you are dialing voice
mail) until the number begins to dial.
3. If you are not certain of the speed dial location, tap Phone > Keypad tab > Menu >
Speed dial and scroll down the list to view the assigned phone number.
In Call Options
Your device provides a number of features that are available for use during a call.
Active Call Menu
Dialer
Recent
activity
Adds a
new call
Activates or
Deactivates
speaker phone
Mutes or Unmutes
the call
Ends the call
Activates or
Deactivates
Bluetooth
headset
To make a new call while a call is in progress:
1. From the currently active call, tap Add call to dial the second call.
2. Dial the new phone number and tap Call.
To switch between the two calls:
Swap
► Tap the on-screen previous On hold number entry and select
gray and displays On hold. The new active call displays a green background behind the number.
Swap
Swap. The previous In call number turns
Turning the Speaker phone on and off
While on a call, you can use your Speaker phone by following these steps:
1. Tap
2. Tap
Tip: When the speaker is turned On, the color of the speaker is green. When the speaker is turned Off, the
Speaker
Speaker off to toggle the speaker phone on.
Speaker
Speaker on to toggle the speaker phone off.
color of the speaker is white.
Muting a Call
1. Tap
2. Tap
Mute
Mute off to turn mute on so the other caller cannot hear you speaking.
Mute
Mute on to turn mute off and resume your conversation.
Switching to Bluetooth Headset
1. Pair the target Bluetooth headset prior to your call.
2. While on a call, switch to the Bluetooth headset instead of speaker by tapping
3. At the prompt, tap OK to enable Bluetooth if it is not already activated.
4. While on a call, switch back to the device speaker by tapping
Bluetooth headset on.
Bluetooth
Bluetooth
Bluetooth headset off.
Note: Extra volume features are disabled while using Wi-Fi Calling.
Personalizing the Call Sound Setting
During a call it may be necessary to adjust the sound of the incoming call by selecting an audio equalizer
setting for the current call.
1. From the currently active call, tap Menu > Personalize call sound.
Note: If prompted to enable the feature via the Call settings menu, go to Settings > Call settings > Personalize
call sound.
2. Select an available option. Choose from: Off, Soft sound, Clear sound, Adapt sound left, and Adapt sound
right.
Section 3: Call Functions and Contacts List
19
More In-Call Options
During a call you can save the current caller’s information to the Contacts list, or create a Memo.
► Tap Menu and then select an available in-call option:
● Hold: During a call you can place the caller on hold.
● Contacts: During a call you can look up a number in the Contacts list. Browse the Contacts list for the
information you need.
Having a Private Conversation with One Participant
Note: The Manage conference call option is not available for multi-party calls created while using the Wi-Fi
Calling feature. You must be on the cellular network to use the manage feature.
When you have two participants in a multi-party session, it might be necessary to place one of those
participants on hold so that a private conversation can be held with a single caller. While you are in a multiparty call:
● Memo: During a call it may be necessary to create a new memo via an available pop up screen.
● Messages: During a call you can create a message.
— Address and create the message.
— Review your message and tap
● Personalize call sound: During a call it may be necessary to adjust the sound of the incoming call by
selecting an audio equalizer setting for the current call. For more information, refer to “Personalizing the Call
Sound Setting” on page 19.
● Extra volume: During a call it may be necessary to enable additional increases in the speaker volume.
● Settings: Provides quick access to the Phone settings screen.
Send.
Multi-Party Calls
Making a Multi-Party Call
A multi-party call is a network service that multiple people to participate in a multi-party or conference call.
For further details about subscribing to this service, contact
customer service.
Setting up a Multi-Party Call
1. From the Home screen, tap Phone.
2. Dial the number for the first participant and tap Call.
3. Once connected, tap Add call, enter the second phone number and tap Call. The first caller is
placed on hold.
4. Wait for the second caller to answer the incoming call, tap the on-screen previous On hold number entry
and select Merge. The two calls are now joined into a multi-party call and display in the order in which
they were called.
Important! Multiple callers can be joined to a single multi-party line. Additional callers participate in a new Multi-
party session and are held in conjunction with the previous multi-party call. You can swap or place
each multi-party call on hold.
1. From within the merged call, tap Manage.
2. Tap Split Caller adjacent to the participants you would like to split from the current multi-line call. The
list displays the callers in the order they were dialed.
Note: The Manage conference call option is not available for multi-party calls created while using the Wi-Fi
Calling feature. You must be on the cellular network to use the manage feature.
3. Tap the participant to which you want to speak privately.
You can now talk privately to that person while the other participants can continue to converse with each
other. If there is only one other participant, that person is placed on hold.
4. To return to the multi-party call, tap the Merge icon. All of the multi-party call participants can now hear
each other.
Dropping One Participant
1. From within the merged call, tap Manage > End to the right of the number to drop.
The participant is disconnected and you can continue the call with the other participant.
2. Tap End call to end your conversation with the remaining caller.
Call Waiting
You can answer an incoming call while you have a call in progress, if this service is supported by the network
and you have previously set the Call waiting option to Activate.
You are notified of an incoming call by a call waiting tone.
To answer a new call while you have a call in progress:
1. In a single motion, touch and slide in any direction to answer the new incoming call.
2. Tap an option from the Accept call after menu:
● Putting xxx on hold: Place the previous caller on hold while you answer the new incoming call.
● Ending call with xxx: End the previous call and answer the new call.
Note: The new caller appears at the top of the list. The previous caller is placed on hold and appears at the
bottom of the list.
20
3. Tap the on-screen previous On hold number entry and select
Swap to switch between the two calls.
Swap
Swap
This places the new caller on hold and activates the previous call.
Important! The currently active call is displayed with a green background.
4. Tap
Swap again to switch back.
Swap
Swap
Logs Tab
The Logs tab is a list of the phone numbers (or Contacts entries) for calls you placed, accepted, or missed.
The Logs tab makes redialing a number fast and easy. It is continually updated as your device automatically
adds new numbers to the beginning of the list and removes the oldest entries from the bottom of the list.
The Notification area of the Home screen (upper left) displays phone notifications, status, or alerts such as:
Displays when a call is in progress.
Displays when a call was missed.
Call logs - Caller Overview
Delete
Active Call
Menu
Contact
Details
Accessing the Logs Tab
1. From the Home screen, tap Phone > Logs tab.
2. Tap an entry to view available options.
Note: The Logs tab only records calls that occur while the phone is turned on. If a call is received while it is
turned off, it will not be included in your calling history.
Each entry contains the phone number (if it is available) and Contacts entry name (if the number is in your
Contacts).
Indicates all outgoing calls made from your device.
Indicates any received calls that were answered.
Indicates a missed call.
Indicates any received calls that were rejected.
Indicates auto rejected calls.
Note: You can also view missed calls from within the Notifications area. Select
entry to open the Logs screen.
and tap the Missed call
Call
Send
Message
Call History
1.
Tap a contact entry name or number to reveal the Call options screen:
2. Tap Menu to reveal additional options:
● Copy to dialing screen: Pass the current number to your dialer and then edit the selected number before
you place your next outbound call.
● Send number: Send the current Contacts entry information to an external recipient.
● Add to reject list: Add the current phone number to an automatic rejection list. Similar to a block list, the
selected caller will be blocked from making an incoming calls to your phone.
Altering Numbers from the Logs List
If you need to make a call from the Logs screen and you need to alter the number prior to dialing, you can
add the appropriate prefix by prepending the number.
1. From the Home screen, tap Phone > Logs tab.
2. Open an entry to access the entry-specific context menu.
3. Tap Menu > Copy to dialing screen.
Note: If prompted, select the Phone application to handle the action.
4. Edit the number using the onscreen keypad or delete digits by pressing Delete to erase the
numbers.
5. Tap Call once the number has been changed.
Section 3: Call Functions and Contacts List
21
Erasing the Call logs List
You can delete either an individual call log entry or all current entries from the Logs list.
To clear a single entry from the list:
1. From the Home screen, tap Phone > Logs tab.
2. Select an entry and then tap Delete > Select all > Done.
To clear all entries from the list:
1. From the Home screen, tap Phone > Logs tab.
2. Tap Menu > Delete > Select all > Done.
3. Tap OK to continue with the erasure.
– or –
Tap Cancel to stop the current process.
Call Duration
1. From the Home screen, tap Phone > Logs tab.
2. Tap Menu > Call duration.
3. The following times are displayed for Voice and Data:
● LAST CALL: Shows the length of time for the last call.
● DIALED CALLS: Shows the total length of time for all calls made.
● RECEIVED CALLS: Shows the total length of time for all calls received.
● ALL CALLS: Shows the total length of time for all calls made and received.
● LIFETIME CALLS: Shows the total length of time for calls made and received (these numbers never get
reset).
4. You may reset these times (except for LIFETIME CALLS) to zero by tapping Menu then selecting
Reset.
22
Section 4: Contacts
This section explains how to use and manage your Contacts List. You can save phone numbers to your
device’s memory.
Accounts
From the Accounts menu you decide if you want applications to synchronize, send, and receive data at any
given time, or if you want the applications to synchronize automatically. After determining how you want the
accounts to synchronize, indicate which account to synchronize with your Contacts list.
1. Sign in to your Google account.
2. From the Home screen, tap Apps > Settings > Accounts.
Note: The Accounts area lists those accounts that have been added to the device and provides an Add
account button to quickly and easily add new ones.
Contacts List
Tabs
Search
Contacts field
Contacts
Menu
Create
Contacts
Groups
Tabbed
Navigation
Note: SIM contacts only store the Name and Phone number for an entry.
● Samsung account contacts are shared with your existing Samsung account.
● Google contacts are shared with your existing Google account and can also be imported to your phone
after you have created a Google Mail account.
● Microsoft Exchange ActiveSync (also known as Work or Outlook) contacts are those contacts that are
intended to be shared with either an Exchange Server or from within Microsoft® Outlook®.
● Add new account lets you create a new account type. Choose from Samsung account, Google, or
Microsoft Exchange ActiveSync.
Note: When storing an entry into your micro SIM card, note that only the Name, and Number are saved. To save
additional information for a particular contact, such as notes, email, dates, etc., it is important to save that
Contact into your phone’s on board memory.
1. From the Home screen, tap Apps > Contacts.
2. Tap to create a contact.
Note: You can also add a new contact by entering a number from the Phone keypad and then tapping Add to
Contacts > Create contact. Continue with step 3.
3. Tap a destination type (Device, SIM, Samsung account, Google, or Microsoft Exchange ActiveSync)
(depending on where you want to save the new contact information).
4. Tap the Name field and enter a name for this contact using the displayed keypad.
● Tap to access additional name entries such as:
Name prefix, First name, Middle name, Last name, and Name suffix.
5. Tap the image icon and select a photo for this contact. Selections are: Image, Tagged pictures, or
Takepicture.
Creating a Contact
The default storage location for saving phone numbers to your Contacts List is your device’s built-in memory.
If existing Google and Corporate email accounts have been synchronized to your phone, these will be made
available to your device during the creation of new entries. These new Contacts entries can be assigned or
saved to synced accounts such as Device, SIM, Google, or Corporate.
Your device automatically sorts the Contacts entries alphabetically. You can create either a Device, SIM,
Samsung account, Google, or Microsoft Exchange ActiveSync contact.
Important! The Google and Microsoft Exchange ActiveSync account types are only visible after creating an
email account of those types on your phone.
● Device contacts are stored locally on the device.
Note: If the device is ever reset to its factory default parameters, contacts stored on the device can be lost.
● SIM contacts are stored within the micro SIM Card.
Note: The label entries below can change and are dependent on the selected destination type (ex: the Other
and Custom might not appear with an Exchange ActiveSync account destination type).
6. Tap the label button (to the left of the Phone field) and scroll through the list to select a category such as
Mobile, Work, Home, Work Fax, Home Fax, Pager, Other, Callback, or Custom.
7. Tap a phone number field and enter a phone number.
● Tap on the QWERTY keyboard to remove a previously entered phone number.
● Tap
● Tap
8. Enter additional information such as: Email, Groups, Ringtone, or tap Add another field to input additional
category information.
● Add another field contains the following options: Phonetic name, Organization, IM, Address, Notes,
Nickname, Website, Internet call, Events, Relationship, Message tone, and Vibration pattern.
● Use your finger to slide the page up or down to see additional fields and categories.
9. Tap Save to complete and store the new entry.
– or –
Tap Cancel to delete the current entry.
to enter an additional phone number
to remove a previously entered phone number.
Section 4: Contacts
23
Loading...
+ 64 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.