Samsung E1225 Disassembly and Assembly Instructions

Level

7.

Disassembly and Assembly Instructions

7-1.

Repair

2

7-1-1.

1)

2) Torque : 1.1 ~ 1.3 Kgf·cm

Disassembly

Unscrew2points at the REAR case

Be careful not to make scratch and molding damage!

DIsassemble the REAR as below sequence

Be careful not to make scratch and molding damage!

1)
Be careful not to damage IF COVER

2)

Be careful not to make scratch and molding damage!

1)

SAMSUNG Proprietary-Contents may change without notice

This Document can not be used without Samsung's authorization

Be careful not to make scratch and molding damage!

1)

7-1

Level2Repair

Disassemble the SHIELD CAN

Separate the KEYPAD from the FRONT

1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!

Separate the SPEAKER from the REAR.

1) Be careful not to make scratch and molding damage!

2) Be careful speaker contact pin damage!

Separate the MOTOR from the REAR.

1) Be careful not to make scratch and molding damage!

2) Be careful motor contact pin damage!

7-2

SAMSUNG Proprietary-Contents may change without notice

This Document can not be used without Samsung's authorization

Level2Repair

7-1-2

1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!

Assembly

Assemble the SHIELD CAN

INSERT KEYPAD to FRONT.

INSERT SPEAKER, MOTOR to REAR.

1) Be careful not to make scratch and molding damage!

2) When insert MOTOR, use PUSHING JIG.

3) CHECK SPEAKER, MOTOR insert tightly.

INSERT PBA TO FRONT. INSERT MIC TO FRONT.

1) Be careful not to make scratch and molding damage!

2) Be careful nothing goes between LCD and FRONT.

7-3

SAMSUNG Proprietary-Contents may change without notice

This Document can not be used without Samsung's authorization

Level2Repair

COMBINE REAR FROM TOP TO BOTTOM.

1) Be careful not to make scratch and molding damage!

2) Be careful not to damage IF COVER.

Screw 2 points at the REAR case.

①

1) Be careful not to make scratch and molding damage!

2) Torque : 1.1 ~ 1.3 Kgf·cm

②

7-4

SAMSUNG Proprietary-Contents may change without notice

This Document can not be used without Samsung's authorization