GSM TELEPHONE
GT-E1080i
GSM TELEPHONE
CONTENTS
Safety Precautions
1.
Specification
2.
Product Function
3.
Exploded View and Parts list
4.
MAIN Electrical Parts List
5.
Level1Repair
6.
Disassembly and Assembly
7.
Instructions
Chart of Troubleshooting
8.
Reference data
9.
Notice
All functionality, features, specifications and other
product information provided in this document inclu
ding, but not limited to, the benefits, design, pricing,
components, performance, availability, and capabiliti
es of the product are subject to change without
-
notice or obligation. Samsung reserves the right to
make changes to this document and the product
described herein, at anytime, without obligation on
Samsung to provide notification of such change.
:
Safety Precautions
1.
Repair Precaution
1-1.
Repair in Shield Box, during detailed tuning. Take specially care of tuning or test, because
―
specipicty of cellular phone is sensitive for surrounding interference(RF noise).
Be careful to useakind of magnetic object or tool, because performance of parts is damaged by
―
the influence of magnetic force.
Surely useastandard screwdriver when you disassemble this product, otherwise screw will be
―
worn away.
Useathicken twisted wire when you measure level.
―
thicken twisted wire has low resistance, therefore error of measurement is few.
A
Repair after separate Test Pack and Set because for short danger(for example an overcurrent
―
and furious flames of parts etc) when you repair board in condition of connecting Test Pack and
tuning on.
Take specially care of soldering, because Land of PCB is small and weak in heat.
―
Surely tune on/off while using AC power plug, becausearepair of battery charger is dangerous
―
when tuning ON/OFF PBA and Connector after disassembling charger.
Don't use as you pleases after change other material than replacement registered on SEC System.
―
Otherwise engineer in charge isn't charged with problem that you don't keep this rules.
1-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Safety Precautions
ESD(Electrostatically Sensitive Devices) Precaution
1-2.
Several semiconductor may be damaged easily by static electricity. Such parts are called by ESD
Electrostatically Sensitive Devices), for example IC,BGA chip etc. Read Precaution below.
(
You can prevent from ESD damage by static electricity.
Remove static electricity remained your body before you touch semiconductor or parts with
―
semiconductor. There are ways that you touch an earthed place or wear static electricity prevention
string on wrist.
Use earthed soldering steel when you connect or disconnect ESD.
―
Use soldering removing tool to break static electricity.,otherwise ESD will be damaged by static
―
electricity.
Don't unpack until you set up ESD on product. Because most of ESD are packed by box and
―
aluminum plate to have conductive power,they are prevented from static electricity.
You must maintain electric contact between ESD and place due to be set up until ESD is
―
connected completely to the proper place oracircuit board.
1-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Specification
2.
GSM General Specification
2-1.
GSM850
Phase 1
Freq.
Band[MHz]
Uplink/Downlink
ARFCN range 128~251 512~885
Tx/Rx spacing 45MHz 95MHz
Mod. Bit rate/
Bit Period
Time Slot
Period/Frame
Period
Modulation 0.3GMSK 0.3GMSK
MS Power 33dBm~5dBm 30dBm~0dBm
824.2~848.8
869.2~893.8
270.833kbps
3.692us
576.9us
4.615ms
DCS1800
Phase 1
1710~1785
1805~1880
270.833kbps
3.692us
576.9us
4.615ms
Power Class 5pcl ~ 19pcl 0
Sensitivity -102dBm -100dBm
TDMA Mux 8 8
Cell Radius 35Km 2Km
pcl
~15
pcl
2-1
Speclflcation
GSM Tx Power Class
2-2.
TX Power
GSM
control level
53 3 ± 3
63 1 ± 3
72 9 ± 3
82 7 ± 3
92 5 ± 3
10 23±3
11 21±3
850
dBm
dBm
dBm
dBm
dBm
dBm
dBm
TX Power
control level
03 0 ± 3
12 8 ± 3
22 6 ± 3
32 4 ± 3
42 2 ± 3
52 0 ± 3
61 8 ± 3
DCS1800
dBm
dBm
dBm
dBm
dBm
dBm
dBm
12 19±3
13 17±3
14 15±3
15 13±3
16 11±5
17 9±5
18 7±5
19 5±5
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
71 6 ± 3
81 4 ± 3
91 2 ± 4
10 10±4
11 8±4
12 6±4
13 4±4
14 2±5
15 0±5
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
2-2
Operation Instruction and Installation
3.
Main Function
GSM
•
•1.43"
WAP
•
SMS, MMS
•
•64
Noise Cancellatio
•
JAVA
•
850/1800
CSTN
Browser
2.0
Poly Melody
3-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
4.
Software Adjustments
4-1.
Test Jig(GH99
RF Test Cable(GH
-36900
39-00985
A)
A)
Test Cable(GH
Adapter(GH
39-01160
99-38251
A)
A)
4-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
Software Downloading
4-2.
4-2-1.
•
•
•
•
•
•
•
4-2-2.
■
1
Pre-requsite for Downloading
Downloader Program(
PNX4900 Downloader
v1.0
GT-E1080 Mobile Phone
Data Cable
JIG BOX
Test Cable
Serial Cable
Binary files
S/W Downloader Program
Load the binary download program by executing the
PNX4900 Downloader
"
Select the connected serial port and the rate of speed
.
v1.0
Lite
"
For Lite)
.
4-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Select the Port, Baud Rate and Mode
.
2
Array course control
.
Select the START Botton, When Complete DL.Bootloader.
.
3
4-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
.4.P
4
ress the"Start" button and connect the Handset, then press
"
확인
".
Check the All Download
.
5
Calset,Click the Download Botton,
&
4-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
When downloading is complete, automatically the small window was showed up.
.
6
Confirm the downloaded version name and etc.
.
7
*#1234#
Full Reset
:
*2767*3855#
4-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
:
Exploded View and Parts List
5.
5-1.
Cellular phone Exploded View
QMW01
QFR01
QKP01
QMP01
QLC01
QMO01
QSP01
QCR89
QME01
QMI01
QSH01
QIF01
QRE01
5-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
QBC00
Exploded View and Parts List
5-2.
Cellular phone Parts list
Design LOC Description SEC CODE
QSP01 SPEAKER
QCR89 SCREW-TAPPING
3001-002509
6002-001428
QMI01 MICROPHONE-ASSY-SGH_T105G(MESH) GH30-00607B
QMO01 MOTOR DC-SCH-S369 GH31-00392A
QBA01 INNER BATTERY PACK-800MAH,BLK,UNI,MAIN GH43-03241A
QME01 DOME SHEET-MAIN
KEY(GT-E1080) GH59-07942A
22
QKP01 RMO KEY-ALL(SER) GH73-13292A
QMP01 A/S ASSY-PBA MAIN GT-E1080I GH82-04438A
QLC01 ASSY LCD-1.43" STD CSTN PNL GH96-04008A
QBC00 ASSY COVER-BATT GH98-13873A
QRE01 ASSY CASE-REAR GH98-13871A
QIF01 PMO COVER-IF GH72-55325A
QFR01 ASSY CASE-FRONT GH98-13872A
QMW01 PCT WINDOW-MAIN GH72-54917A
5-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
MAIN Electrical Parts List
6.
Design LOC SEC CODE Description
D200,D201
ZD200
ZD301,ZD302
D301,D302,D303
TR200
LED301,LED302,LED303
LED304
TR100
UME200
PAM100
U101
TH200
R301
R300,R306,R312
R208
R200,R202
R107
R303,R304,R305,R307
R308
R309,R310
R311
R209
R210
R106
R204
C220,U302
C225,C227
C107
C302
C106
C111,C112,C114,C228
C312,C313
C321,U301
C209,C210,C229
C105,C110
C113,C115,C116,C117
C224
C211,C212,C215,C231
0401-001110
0403-001547
0406-001286
0406-001293
0505-002223
0601-002846
0601-002846
1003-001440
1108-000239
1201-002933
1203-006123
1404-001221
2007-000139
2007-000141
2007-000144
2007-000148
2007-000162
2007-000172
2007-000172
2007-000173
2007-000174
2007-001301
2007-001333
2007-003025
2007-008500
2203-000386
2203-000425
2203-000627
2203-000679
2203-000696
2203-000812
2203-000812
2203-001153
2203-002709
2203-005057
2203-005281
2203-005344
2203-006048
DIODE-SWITCHING
DIODE-ZENER
DIODE-TVS
DIODE-TVS
FET-SILICON
LED
LED
IC
MEMORY
IC
IC
THERMISTOR
R-CHIP
R-CHIP
R-CHIP
R-CHIP
R-CHIP
R-CHIP
R-CHIP
R-CHIP
R-CHIP
R-CHIP
R-CHIP
R-CHIP
R-CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
6-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Main Electrical Parts List
Design LOC SEC CODE Description
C301,C303,C319,C323
C203,C204,C320
C202,C205,C206,C207
C208,C214,C315,C316
C109,C314
C200,C201,C226
C308
C108
C223
L103
L100,L106
L107
L104
L302,L303,L304,L305
L306,L307,L308,L309
L105
L108
L201
OSC200
OSC201
F100
L200
RFS100
SIM200
IFC300
BTC200
2203-006048
2203-006208
2203-006399
2203-006399
2203-006562
2203-006824
2203-007270
2203-007279
2203-007425
2703-001733
2703-002170
2703-002176
2703-002199
2703-002201
2703-002201
2703-002203
2703-002204
2703-003184
2801-004805
2801-004882
2904-001879
3301-001158
3705-001503
3709-001488
3710-002683
3711-006808
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
C-CERAMIC,CHIP
INDUCTOR-SMD
INDUCTOR-SMD
INDUCTOR-SMD
INDUCTOR-SMD
INDUCTOR-SMD
INDUCTOR-SMD
INDUCTOR-SMD
INDUCTOR-SMD
INDUCTOR-SMD
CRYSTAL-UNIT
CRYSTAL-UNIT
FILTER-SAW
CORE-FERRITE
CONNECTOR-COAXIAL
CONNECTOR-CARD
CONNECTOR-SOCKET
CONNECTOR-HEADER
SC102,SC103,SC104 GH70-03276A ONBOARD-CLIP-4
SC105,SC106,SC107 GH70-03276A ONBOARD-CLIP-4
SC108,SC109 GH70-03276A ONBOARD-CLIP-4
UCP200
1205-003923
IC
Please consult the GSPN website(Samsung Portal) for the most recent version of the product's
part list.
6-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Block Diagrams
7.
7-1.
RF Block Diagram
ANT
MODEM
7-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Block Diagrams
7-2.
Base Band Solution Block Diagram
7-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
PCB Diagrams
8.
Top
8-1.
HDC300
SOFT300
S
END
D
IGIT300
D
IGIT303
D
IGIT306
S
TA
UP
LEFT
INT
DOWN
DIGIT301
LED303
DIGIT304
ZD302
DIGIT307
LED301
R
DIGIT309
RIGHT
LED304
LED302
SOFT301
IGIT302
D
IGIT305
D
IGIT308
D
SHARP
END
8-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization