Samsung DVD-VR375/XAA User Manual
DVD & VCR
user manual
DVD-VR375
imagine the possibilities
Thanks you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
getting started
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage consisting a risk of electric shock
is present within this unit.
Do not install this equipment in a confi ned space such as a bookcase or similar unit.
WARNING
To prevent damage which may result in fi re or electric shock hazard, do not expose this appliance to rain or
moisture.
CAUTION
THIS DVD RECORDER & VCR USES AN INVISIBLE LASER BEAM WHICH CAN CAUSE HAZARDOUS RADIATION
EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE RECORDER AS INSTRUCTED.
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK) NO
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
CAUTIONS
Caution : To prevent electric shock, match the wide blade of the plug to wide slot of the socket and fully insert.
This product satisfi es FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use
shielded cables and connectors for connections.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution : FCC regulations state that any unauthorized changes or modifi cations to this equipment may void the
user’s authority to operate it.
2_ getting started
M
This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
This DVD Recorder & VCR is designed and manufactured to respond to the Region Management Information. If the
Region number of a DVD disc does not correspond to the Region number of this , the DVD Recorder & VCR cannot
play the disc.
● GETTING STARTED
PRECAUTION
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future reference.
1)
Read these instructions.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
5)
Do not use this apparatus near water.
6)
Clean only with a dry cloth.
7)
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8)
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifi ers) that produce heat.
English _3
getting started
Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two
9)
blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fi t into your
outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
10)
and the point where they exit from the apparatus.
Only use attachments/accessories specifi ed by the manufacturer.
11)
Use only with the cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or
12)
sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
13)
Refer all servicing to qualifi ed service personnel. Service is required when the apparatus has been
14)
damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus. Service is also required if the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
Handling Cautions
•
Before connecting other components to this recorder, be sure to turn them all off.
•
Do not move the recorder while a disc is being played, or the disc may be scratched or broken, and the
recorder’s internal parts may be damaged.
•
Do not put a fl ower vase fi lled with water or any small metal objects on the recorder.
•
Be careful not to put your hand into the disc tray.
•
Do not place anything other than the disc in the disc tray.
•
Exterior interference such as lightning and static electricity can affect normal operation of this recorder.
If this occurs, turn the DVD Recorder & VCR off and on again with the POWER button, or disconnect and
then reconnect the AC power cord to the AC power outlet. The recorder will operate normally.
•
Be sure to remove the disc and turn off the recorder after use.
•
Disconnect the AC power cord from the AC outlet when you don’t intend to use the recorder for long
periods of time.
•
Clean the disc by wiping in a straight line from the inside to the outside of the disc.
•
Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases,
shall be placed on the apparatus.
•
The Mains plug is used as a disconnect device and shall stay readily operable at any time.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
•
Do not use benzene, thinner, or other solvents for cleaning.
•
Wipe the cabinet with a soft cloth.
Disc Handling
•
Use discs with regular shapes. If an irregular disc (a disc with a special shape) is
used, this DVD Recorder & VCR may be damaged.
Holding discs
•
Avoid touching the surface of a disc where recording is performed.
4_ getting started
DVD-RAM, DVD±RW and DVD±R
Clean with an optional DVD-RAM/PD disc cleaner. Do not use cleaners or cloths for CDs to
•
clean DVD-RAM/DVD±RW/DVD±R discs.
DVD-Video, Audio CD
•
Wipe off dirt or contamination on the disc with a soft cloth.
Cautions on handling discs
•
Do not write on the printed side with a ball-point pen or pencil.
•
Do not use record cleaning sprays or antistatic. Also, do not use volatile chemicals, such as benzene or
thinner.
•
Do not apply labels or stickers to discs. (Do not use discs fi xed with exposed tape adhesive or leftover
peeled-off stickers.)
•
Do not use scratch-proof protectors or covers.
•
Do not use discs printed with label printers available on the market.
•
Do not load warped or cracked discs.
Disc Storage
Be careful not to damage the disc because the data on these discs are highly vulnerable to the environment.
•
Do not keep under direct sunlight.
•
Keep in a cool ventilated area.
•
Store vertically.
•
Keep in a clean protection jacket.
•
If you move your DVD Recorder & VCR suddenly from a cold place to a warm place, condensation may
generate on the operating parts, including the lens, and cause abnormal disc playback. In this case, do not
connect the plug to the power outlet and wait for two hours. Then insert the disc and try to play back again.
It will work properly when condensation has evaporated.
● GETTING STARTED
Disc Specifi cations
DVD-Video
A digital versatile disc (DVD) can contain up to 135- minutes of images, 8 audio languages and 32 subtitle
•
languages. It is equipped with MPEG-2 picture compression and Dolby 3D surround, allowing you to enjoy
vivid and clear theater quality images in the comfort of your own home.
When switching from the fi rst layer to the second layer of a double-layered DVD Video disc, there may be
•
momentary distortion in the image and sound. This is not a malfunction of the unit.
Once a DVD-RW(V)/-R(V)/+R recorded is fi nalized, it is playable in a standard DVD player.
•
Audio CD
An audio disc on which 44.1kHz PCM Audio is recorded.
•
Plays CD-DA format audio CD-R and CD-RW discs. This unit may not be able to play some CD-R or
•
CD-RW discs due to the condition of the recording.
CD-R/-RW
MP3 CD-R/-RW
❖
Only CD-R discs with MP3 fi les recorded with ISO9660 or JOLIET format can be played back
•
Only MP3 fi les with the "mp3" or "MP3" extension can be used.
•
Playable bitrate range is from 32 Kbps to 320Kbps.
•
The unit can handle a maximum of 499 fi les and folders.
•
DVD-RAM/±RW/±R discs that contain MP3 fi les can be played back.
•
English _5
getting started
JPEG CD-R/-RW
❖
Only JPEG fi les with the ".jpg", ".JPG" extension can be used.
•
The unit can handle a maximum of 1000 fi les and folders.
•
Maximum size of progressive JPEG is 3M pixels.
•
MOTION JPEG is not supported.
•
DVD-RAM/±RW/±R discs that contain JPEG fi les can be played back.
•
Using CD-R/-RW
❖
Use a 700MB(80 minutes) CD-R/-RW disc. If possible, do not use a 800MB(90 minutes) or above disc, as
•
the disc may not play back.
If the CD-R/-RW disc was not recorded as a closed session, you may experience a delay in the early
•
play-back time, and all recorded fi les may not play.
Some CD-R/-RW discs may not be playable with this unit, depending on the device which was used to
•
burn them. For contents recorded on CD-R/-RW media from CDs for your personal use, playability may
vary depending on contents and discs.
When recording from CDs for your personal use to CD-R/-RW discs, playability may vary depending on the
•
contents and discs.
DVD-R/-RW Disc Playback and Recording
Recording and playback can be performed on DVD-R/-RW discs in both Video and VR Modes.
•
Once a DVD-R/-RW is recorded in VR or Video mode and fi nalized, you cannot perform additional
•
recordings.
Once a DVD-R/-RW is recorded in Video Mode and fi nalized, it becomes a DVD-Video.
•
In both modes, playback can be performed before and after fi nalization, but additional recording, deleting
•
and editing can not be performed after fi nalization.
If you want to record the disc in VR Mode and then record in V Mode, be sure to execute format. Be careful
•
when executing Format because all the recorded data may be lost. You can change the disc mode only
one times when the unused DVD-R disc is inserted.
• DVD-R/-RW (VR mode)
- You can record multiple titles, edit, delete, partial delete, create a playlist, etc.
- A disc that is recorded in this mode may not be played by existing DVD players.
• DVD-R/-RW (Video mode)
- The disc can be played by an existing DVD player once it has been fi nalized.
- If a disc that has been recorded in Video mode by a different manufacturer's recorder but has not been
fi nalized it cannot be played or recorded by this recorder.
- When programing is erased from a DVD-R, that space does not become available. Once an area on a
DVD-R is recorded on, that area is no longer available for recording, whether the recording is erased or not.
DVD+R Disc Playback and Recording
Once a DVD+R is recorded and fi nalized, it is playable in a standard DVD player.
•
You can record onto the available space on the disc and perform editing functions such as giving titles to
•
discs and programs and erasing programs before fi nalizing.
When programing is erased from a DVD+R, that space does not become available. Once an area on a
•
DVD+R is recorded on, that area is no longer available for recording, whether the recording is erased or not.
It takes about 30 seconds for the unit to update the recorded information after recording fi nishes.
•
This product optimizes the DVD+R for each recording. Optimizing is executed when you start recording
•
after inserting the disc or turning on the unit. Recording onto the disc may become impossible if optimizing
is performed too many times.
Playback may be impossible in some cases due to the condition of recording.
•
This unit can play back DVD+R discs recorded and fi nalized with a Samsung DVD video recorder. It may
•
not be able to play some DVD+R discs depending on the disc and the condition of the recording.
6_ getting started
DVD+RW Disc Playback and Recording
With DVD+RW discs, there is no difference between DVD-Video format (Video mode) and DVD-Video
•
Recording format (VR mode).
Finalizing is generally unnecessary when using a DVD+RW disc.
•
DVD-RAM Disc Playback and Recording
For cartridge type DVD-RAM discs, remove the cartridge and use only the disc.
•
You cannot play a DVD-RAM in most DVD players due to compatibility issues.
•
Only DVD-RAM standard Version 2.0 discs can be played in this unit.
•
DVD-RAM discs recorded on this unit may not work with other DVD Players. To determine compatibility
•
with these DVD-RAM discs, refer to the user’s manual for the player.
COPY PROTECTION
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD Recorder &
VCR directly to your TV, not to a VCR. Connecting your recorder to a VCR results in a distorted picture from copyprotected DVD discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Protection
Program-protection: See page 70 “Locking a Title”
•
Disc-protection: See page 76 “Disc Protection”
•
❋ DVD-RAM/DVD±RW/DVD±R discs that are incompatible with the DVD-VIDEO format cannot be played
with this product.
For more information on DVD recording compatibility, consult your DVD-RAM/DVD±RW/DVD±R manufacturer.
❋
❋ Use of poor quality DVD-RAM/DVD±RW/DVD±R discs may cause the following unexpected problems
including, recording failure, loss of recorded or edited materials, or damage to the recorder.
● GETTING STARTED
Do not use the following discs!
LD, CD-G, CD-I, CD-ROM and DVD-ROM, Divx discs should not be used in this product.
•
[Note]
Some commercial discs and DVD discs purchased outside your region may not be playable with this
•
product. When these discs are played, either “No Disc” or “The disc cannot be played. Please check the
regional code of the disc.” will be displayed.
If your DVD-RAM/DVD±RW/DVD±R disc is an illegal copy or is not in DVD video format, it may also not be playable.
•
Disc Compatibility
❖
Not all brands of discs will be compatible with this unit.
•
The latest fi rmware upgrade to improve recording & playback quality can be downloaded from our web site.
•
(Download Center at www.samsung.com)
If disc compatibility problems continue, or there is an issue upgrading your recorder, contact the Call Center
•
at 1-800-SAMSUNG.
English _7
getting started
GETTING STARTED
2
CONNECTING & SETTING UP
19
SYSTEM SETUP
28
2 Warning
3 Precaution
10 General Features
11 Before Reading the User’s Manual
12 How to use the DVD Recorder & VCR
13 Unpacking
17 Description
19 Connecting a set top/cable box or satellite
receiver to DVD Recorder & VCR
21 Connecting HDMI/DVI to a TV
23 Connecting the video output
24 Connecting the Audio Cable
26 Connecting External Devices
28 On-Screen Menu Navigation
28 Easy Setup
30 Clock Set
30 Setting up the Video Options
32 Progressive Scan
32 Setting up the Audio Options
35 Setting up the Features
37 Setting up the Options
38 Setting up the Parental
40 VCR Function Setting
41 Set top/Cable Box Control
42 Set top/Cable Box/Satellite Receiver Brand
Code Table
8_ getting started
PLAYBACK
46
46 Region code (DVD-Video only)
46 Logos of Discs that can be played
47 Disc types that can be played
48 Playing a Disc
49 Using the Disc Menu and Title Menu
49 Using the Search & Skip Functions
50 Slow Motion Play/Step Motion Play
51 Using the ANYKEY button
51 Selecting the Audio language
52 Remain
52 Selecting the Subtitle Language
52 Changing the Camera Angle
53 Playing Back an Audio CD (CD-DA)/MP3
54 Playing back a Picture Disc
55 Playing back a VHS Tape (VCR)
RECORDING
57
57 Recordable discs
58 Recording Mode
59 Unrecordable Video
60 Recording immediately
61 Recording through The DV Input jack
62 Making a One Touch Recording (OTR)
62 Making a Timer Recording
64 Editing the Timer List
64 ERASING the Timer List
65 Basic VCR Recording
66 Check Remaining Time
66 Special Recording Features
66 Dubbing to DVD or VIDEO
68 DV/D8 Dubbing
● GETTING STARTED
EDITING
69
REFERENCE
80
APPENDIX
85
69 Playing the Title List
70 Basic Editing (Title List)
73 Advanced Editing (Playlist)
76 Disc Setting
80 Troubleshooting (DVD-VIDEO/DVD-RAM/
DVD±RW/DVD±R)
81 Troubleshooting (DVD)
82 Troubleshooting (VCR)
83 Problems and Solutions (Display error
Message)
85 Specifi cations
English _9
getting started
GENERAL FEATURES
The DVD-VR375 allows you to record, edit and play high quality digital video on DVD-RAM/DVD±RW/DVD±R discs.
High quality digital audio/video recording and playback
You can record up to approximately 16-hours of video on a double side 9.4 GB DVD-RAM disc,up to 15hours on a dual-layer 8.5GB DVD±R disc, and up to 8-hours on a 4.7 GB DVD-RAM/DVD±RW/DVD±R disc,
depending on the recording mode.
Creating DVD video titles using DVD±RW/DVD±R discs
With the DVD-VR375, you can create your own DVD video titles on 4.7 GB DVD±RW/DVD±R or 8.5GB
DVD±R discs.
A Variety of Recording Options
You can set your DVD Recorder & VCR to one of eight different recording modes, each varying in recording
quality and length. Select a recording mode according to the time and picture quality you need.
For example, if picture quality is your top priority, select “HQ” (high quality).
If recording time is your priority, “SLP” may be a possible choice.
Dual layer DVD±Rs have approximately double the capacity of single layer DVD±Rs.
Dubbing digital camcorder content using DV input jack
Record digital camcorder images onto DVD-RAM/DVD±RW/DVD±R discs using the DV input jack (IEEE
1394-4pin). (See page 61.)
High quality progressive scan
Progressive scanning provides high resolution and fl icker free video. The 10-bit 54-MHz DAC, 2D Y/C
Separating circuitry and Time Base Corrector processor technology provide you with the highest image
playback and recording quality. (See page 23.)
Component progressive scan output video is available in both DVD and VCR modes.
When the HDMI cable is connected, 'off' can not be selected. (See page 32)
A variety of functions with an easy-to-use user interface
The Integrated menu systems and messaging functionality allow you to perform the desired operations easily
and conveniently. With a DVD-RAM/DVD-RW/DVD-R(VR mode) disc, you can edit recorded images, create
playlist, and edit videos in a specifi c sequence according to your needs.
HDMI (High Defi nition Multimedia Interface)
HDMI reduces picture noise by allowing a pure digital video/audio signal path from the
DVD Recorder & VCR to your TV.
Tunerless DVD Recorder & VCR
The DVD-VR375 does not have a TV tuner. Recording TV broadcasts is possible via Connection to
Set Top/Cable Box, Satellite and Multi Channel Video Services.
EZ REC MODE
This function allows you Finalize a disc automatically. (See page 36.)
Simplay HD
TM
The DVD-VR375 is SimplayHD
verifi ed.
10_ getting started
BEFORE READING THE USER’S MANUAL
Make sure to check the following terms before reading the user’s manual.
Icons that will be used in manual
Icon Term Defi nition
This involves a function available with DVD or DVD-R(V)/DVD-RW(V)/+R discs
that have been recorded and fi nalized.
Z
DVD
● GETTING STARTED
X
C
V
K
L
B
G
A
J
M
N
H
RAM This involves a function available with DVD-RAM discs.
-RW This involves a function available with DVD-RW discs.
-R This involves a function available with DVD-R discs.
+RW This involves a function available with DVD+RW discs.
+R This involves a function available with DVD+R discs.
CD This involves a function available with a data CD (CD-R or CD-RW).
JPEG
MP3
VHS This involves a function available with VIDEO Tape.
Caution
NOTE This involves tips or instructions on the page that help each function operate.
One-Touch
button
ANYKEY
button
This involves a JPEG function available with CD-R/-RW or DVD±R/±RW/RAM discs.
This involves an MP3 function available with CD-R/-RW or DVD±R/±RW/RAM discs.
This involves a case where a function does not operate or settings may be
cancelled.
A function that can be operated by using only one button.
A function that can be operated by using the ANYKEY button.
About the use of this user’s manual
Be sure to be familiarize yourself with the Safety Instructions before using this product. (See pages 2~7)
1)
If a problem occurs, check the Troubleshooting section.
2)
(See pages 80~82)
Copyright
©2008 Samsung Electronics Co.
All rights reserved; No part or whole of this user’s manual may be reproduced or copied without the prior
written permission of Samsung Electronics Co.
English _11
getting started
HOW TO USE THE DVD RECORDER & VCR
Step 1 : Select the disc type
This unit can record on the following types of discs.
If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a
rewritable DVD±RW or DVD-RAM type disc. If you want to save a recording without making any changes,
choose a non-rewritable DVD±R.
Step 2 : Format the disc to start recording
Unlike a VCR, the recorder automatically starts formatting when an unused disc is inserted.
Using a DVD-RAM/±RW/+R
When an unused DVD-RAM/±RW/+R disc is fi rst inserted, the message "Unformatted Disc. Formatting.
Please wait." will be displayed.
Using a DVD-R
It is not necessary to format a new DVD-R disc. When it is inserted, it will operate in Video mode.
It can also be formatted in VR mode in the setup menu.
You can change the disc mode only once when an unused DVD-R disc is inserted.
You can only use either the VR or Video mode on a DVD-RW/-R, but not both at the same time.
M
You can format a DVD-RW/-R to V or VR mode using disc setting.
It should be noted that the disc's data will be lost when changing formats.
Step 3 : Recording
There are two different recording methods, Direct Recording(recording a program you are currently watching)
and Timer Recording.
Timer recording is classifi ed as follows : Recording mode : HQ (high quality mode), HSP, SP (standard quality
mode), LSP, ESP, LP, EP, SLP (Long duration mode) according to the recording mode.
When recording is set in the AUTO mode, the best quality picture is recorded with regards to the remaining
time on the disc.
Step 4 : Playing
To start playback, select the title you want to play from the title list.
A DVD consists of sections called titles, and sub sections called chapters.
During recording, a title is created between two points where you start and stop recording. Chapters will be
created automatically regardless of the disc type when it is set at the setup menu.
Step 5 : Editing a recorded disc
Editing on discs is easier than conventional video tapes. The recorder supports many different edit functions,
possible only with DVDs.
With a simple and easy edit menu, you can operate various edit functions, such as delete, dubbing, rename,
lock, etc., on a recorded title.
12_ getting started
Creating a playlist (DVD-RAM/-RW/-R in VR mode)
With this recorder, you can create/edit a new playlist on the same disc without changing the original
recording.
Step 6 : Finalizing & Playing on other DVD components
To play your DVD on other DVD players, fi nalizing may be necessary. First, fi nish all editing and recording
operations, then fi nalize the disc.
When using a DVD-RW/-R disc in VR Mode
Although fi nalizing is generally unnecessary when playing the disc on a VR Mode compatible component, a
fi nalized disc should be used for playback.
When using a DVD-RW/-R disc in Video Mode
The disc should be fi nalized fi rst to enable playback on anything other than this recorder. No more editing or
recording can be made on the disc once it has been fi nalized.
When using a DVD+R disc
You should fi nalize the disc to play it on other DVD players. No more editing or recording can be made on the
disc once it has been fi nalized.
You can fi nalize automatically using the EZ REC MODE. (See page 36)
M
● GETTING STARTED
UNPACKING
Accessories
Check for the supplied accessories below.
Video/Audio Cable
(AC39-00073A)
Batteries for Remote Control (AAA Size)
(AC43-12002H)
IR Blaster cable
(AK39-00055A)
Instruction Manual
(AK68-01613A)
Remote Control
(AK59-00084A)
Quick Guide
(AK68-01614A)
English _13
getting started
Connecting the Power Cord
After all connections are complete, plug the power cord into a wall outlet.
Preparing the Remote Control
Installing batteries in the Remote Control
1. Lift the cover at the back of the
remote control upward as shown.
If the remote control does not operate properly:
Check the polarity +/- of the batteries.
•
Check if the batteries are drained.
•
Check if the remote sensor is blocked by obstacles.
•
Check if there is any fl uorescent lighting nearby.
•
Dispose of batteries according to local environmental regulations.
Do not put them in the household trash.
2. Install two AAA size batteries.
Make sure to match the “+” and “–”
ends of the batteries with the diagram
inside the compartment.
3. Replace the cover.
Assuming typical TV usage,
the batteries last for about one
year.
14_ getting started
You can control part of another manufacturer’s TV functions with this remote control.
•
Buttons that can be controlled on your TV : TV POWER, INPUT SEL., TV VOL +/-, TRK/CBC CH/TV CH
(,/.), TV MUTE, 0~9, TV 100+/SET Button.
To determine whether your television is compatible, follow the instructions below.
Switch your television on.
1.
Point the remote control towards the television.
2.
Press and hold the TV button and enter the two-fi gure code simultaneously corresponding to the brand of
3.
your television by pressing the appropriate number buttons.
BRAND CODES
SAMSUNG 01, 14, 15, 23, 31
DAEWOO 19
EMERSON 21
GRADIENTE 30
HITACHI 10
JVC 11
LG 06, 08, 18
LOEWE 28
MAGNAVOX 04
MITSUBISHI 13
BRAND CODES
NEWSAN 27
NOBLEX 25
PANASONIC 12, 24
RCA 07, 29
SANYO 05, 20
SHARP 02, 16, 22
SONY 03
TELEFUNKEN 26
TOSHIBA 09
ZENITH 17
Result: If your television is compatible with the remote control, it will switch off.
It is now programmed to operate with the remote control.
If several codes are indicated for your television brand, try each one in turn until you fi nd one that works. If you
M
replace the remote control’s batteries, you must set the brand code again.
● GETTING STARTED
You can then control the television using the following buttons.
Button Function
TV POWER Used to switch the television on and off.
INPUT SEL. Used to select an external source.
TV VOL +/- Used to adjust the volume of the television.
TRK/CBC CH/TV CH (,.) Used to select the desired channel.
TV MUTE Used to toggle the sound on and off.
0~9 Used to input number directly.
TV 100+/SET Button Used to select channels over 100.
The various functions may not be able to be controlled on all televisions. If you encounter problems, operate the
M
television directly.
English _15
getting started
Tour of the Remote Control
Press this when you use the DVD recorder/player.
Press this to operate your TV.
DVD Button
TV Button
POWER Button
Press to power the DVD Recorder & VCR on and off.
NUMBER Buttons
Press this to select channels 100 or higher on a TV.
Press this to change the Set top/Cable box or satellite receiver
channels. (For some Set top/Cable box or satellite receiver brands)
Press to skip a disc backwards or forwards.
Forward/Rewind, Search, Skip, Stop, Play, Pause.
Press this to bring up the DVD Recorder & VCR’s setup menu.
Press this to display current setting or disc status.
TITLE LIST/DISC MENU Button
Press this to enter the TITLE LIST/Disc menu.
Press this to switch the DVD’s subtitle language.
Press this to set the status of the disc that is being played.
Press this to make a recording on VCR, DVD-RAM/±RW/±R discs.
Press this when dubbing from the VCR to the DVD.
Press this to set the desired recording time and picture quality.
TV 100+/SET Button
F.ADV/SKIP Button
Playback-related Buttons
TV VOL (Volume) Button
TV volume adjustment
MENU Button
ENTER/DIRECTION Buttons
(UP/DOWN or LEFT/RIGHT Buttons)
This button functions as a toggle switch.
INFO Button
SUBTITLE Button
ANYKEY Button
REC Button
TO DVD DUBBING Button
REC SPEED Button
VCR Button
Press this when you use the VCR.
INPUT SEL. Button
Press this to select the AV input signal in external input
mode. (AV input, DV input).
OPEN/CLOSE Button
Press this to open and close the disc tray.
TV POWER Button
Press to power your TV on and off.
AUDIO Button
Press this to access various audio functions.
Selects one of the audio tracks recorded on the disc
when pressed repeatedly.
DVD-RW(VR)/-R (VR) : Selects the main or sub sound.
DVD VIDEO : Selects the audio source.
TV MUTE Button
This operates as Sound Mute. (TV mode)
TRK/CBC CH/TV CH Button
Press this to adjust the tape tracking.
Use this to select a CBC(Set top/Cable box) channel.
Use this to select a TV channel.
RETURN Button
Returns to a previous menu.
EXIT Button
Exit the current menu.
PLAY LIST/TITLE MENU Button
Press this to enter the Edit playlist/Title menu.
ANGLE Button
Press this to access various camera angles on a disc
(if the disc contains multiple camera angles).
EZ REC MODE Button (See page 36)
Use this to set the EZ REC MODE.
TIMER REC Button
Press this when you use Timer Recording.
TO VCR DUBBING Button
Press this when dubbing from the DVD to the VCR.
CANCEL Button
❋ This is a special remote control for the visually
impaired, and has Braille points on the
POWER(
buttons.
), STOP( ) and PLAY( )
16_ getting started
DESCRIPTION
Front Panel
DVD OPEN/CLOSE BUTTON VCR DECK VCR EJECT BUTTON
● GETTING STARTED
CH (./,), SEARCH/SKIP BUTTON
RECORD BUTTON DUBBING BUTTON DVD/VCR SELECT BUTTON
FRONT PANEL DISPLAY DVD DECK DV INPUT JACK
10 11 12
AUDIO L, R INPUT JACKS
13 14 15
(AV 2 IN)
PLAY/PAUSE BUTTON STOP BUTTON
VIDEO INPUT JACK (AV 2 IN) POWER BUTTON
English _17
getting started
Front Panel Display
Playback-related indicator In Disc Indicator
VCR VIEW Indicator
HDMI Indicator REC Indicator STATUS Indicator
Disc Media Indicator TIMER Indicator
DVD VIEW Indicator
Rear Panel
HDMI OUT VIDEO INPUT JACK (AV 1 IN) VIDEO OUT JACK (AV OUT)
AUDIO OUT JACKS
(COMPONENT OUT)
AUDIO OUT JACKS (AV OUT) AUDIO INPUT JACKS (AV 1 IN) SET TOP BOX CONTROL
18_ getting started
COMPONENT VIDEO OUT JACKS
DIGITAL AUDIO OUT JACK
(COAXIAL)
connecting & setting up
CONNECTING A SET TOP/CABLE BOX OR SATELLITE RECEIVER TO DVD RECORDER & VCR
TV + Set top/Cable box or satellite receiver + DVD Recorder & VCR
With the connection below, you can watch and record your desired channel on the Set top/Cable box or
satellite receiver. The DVD-VR375 does not have a TV Tuner , so you must connect a Set top/Cable Box or
Satellite receiver to watch or record TV through DVD Recorder & VCR.
You can record channels by selecting the channel on the Set top/Cable box or satellite receiver.
You cannot record one channel while watching another channel.
Be sure that the Set top/Cable box or satellite receiver is turned on.
● CONNECTING & SETTING UP
RedYellow White
Connecting the IR Blaster cable into the Set top/Cable Box Control jack
Find and Connect the included IR Blaster cable into the Set top/Cable Box Control jack of the DVD
1.
Recorder & VCR.
Find the Set top/Cable Box IR Sensor
2.
A. Turn the Set top/Cable box Off.
B. Hold the Set top/Cable box’s remote so that it touches the front
of the Set top/Cable Box device (see Figure 1)
Figure 1
Correct
Incorrect
English _19
connecting & setting up
C. Move the Set top/Cable Box's remote across the front of the Set top/Cable
Box while pressing the remote's power button On and Off (Figure 2).
(Press and release the power button each time you move the remote; holding down the button will not
work.)
D. When the Set top/Cable box powers On, you have found the sensor.
E. Remember the location of the sensor.
3.
Placing the IR Blaster.
Place the Set top/Cable box controller of the IR Blaster on top or underneath the Set top/Cable box
approximately 1 inch in front of the sensor you found in 2 .
Use the double-sided tape to secure the IR Blaster.
You must select a Set top/Cable box brand from the table on pages 42~44. If you do not know the brand name,
M
please contact your cable provider.
After setting up your Set top/Cable box or satellite receiver with the DVD Recorder & VCR through the IR Blaster
cable, you need to set up the Set top/Cable Box Control menu. (See page 41)
The DVD-VR375 does not have a TV Tuner.
Figure 2
20_ connecting & setting up
CONNECTING HDMI/DVI TO A TV
Connecting to a TV with an HDMI Jack
HDMI ( High Defi nition Multimedia Interface)
HDMI enables you to make a digital video and audio connection with a single cable. Using HDMI, the DVD
player transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input
jack.
Using an HDMI- HDMI cable(not included), connect the HDMI OUT jack on the rear of the DVD Recorder &
VCR to the HDMI IN jack of your TV.
Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder & VCR
appears on your TV screen.
● CONNECTING & SETTING UP
J
To hear audio on your TV when using HDMI, set the digital audio output to PCM (2 channel). (See page 33)
Depending on the HDMI device (TV/HDMI Receiver) you use, audio may not be supported.
If your TV does not support Dolby digital/DTS, Audio output is not available when you set the Digital output as
Bitstream or select DTS On in the Audio setup menu. In this case, set the digital audio output to PCM or DTS Off.
I
f you use an HDMI cable to connect a Samsung TV to the DVD recorder & VCR, you can operate the recorder using
the TV remote control. (This is only available with SAMSUNG TVs that support Anynet+(HDMI CEC).)
(See page 36~37)
HDMI (High Defi nition Multimedia Interface)
HDMI enables you to make a digital video and audio connection with a single cable.
Using HDMI, the DVD and VCR player transmits a digitial video and audio signal and displays a vivid picture on a TV
having an HDMI input jack.
Please check the n logo (If your TV has an n logo, then it supports Anynet+ function.)
During DVD recording, you cannot watch VCR playback by pressing VCR, as the HDMI OUT jacks will output DVD
video signals only.
Connect the HDMI cable to the DVD Recorder & VCR when it is in Stop mode.
If the DVD Recorder & VCR is connected to your TV in HDMI 1080p output mode, you must use High
speed(category2) HDMI cable.
English _21
connecting & setting up
Connecting to a TV with a DVI Jack
Using an HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the DVD Recorder &
VCR to the DVI IN terminal of your TV.
An HDMI to DVI connection requires a separate audio connection, using the audio cables, connect the
AUDIO (red and white) OUT (AV OUT) terminals on the rear of the DVD Recorder & VCR to the AUDIO (red
and white) IN terminals of your TV. Turn on the DVD Recorder & VCR and TV.
Press the input selector on your TV remote control until the DVI signal from the DVD Recorder & VCR appears
on your TV screen.
M
Red
White
To set the HDMI output resolution (480p/720p/1080i/1080p), see page 31.
HDMI (High Defi nition Multimedia Interface)
HDMI enables you to make a digital video and audio connection with a single cable.
Using HDMI, the DVD and VCR player transmits a digital video and audio signal and displays a vivid picture on a TV
having an HDMI input jack.
HDMI is completely compatible with DVI.
The only difference between HDMI and DVI is that HDMI supports multi-channel audio.
HDMI connection description
HDMI connector - Both uncompressed video and digital audio data(LPCM or Bit Stream).
- Even though the DVD Recorder & VCR records analog audio and video, with HDMI the analog signal is converted to
digital signal and is sent to the TV. Both DVD and VCR playback is possible through HDMI.
- If your TV does not support HDCP (High-bandwidth Digital Content Protection), snow noise appears on the screen.
Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a TV is
digital. Therefore either a digital-to-analog converter (in the DVD Recorder & VCR) or an analog-to-digital converter
(in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI
technology is superior because it requires no digital-to-analog conversion and is a pure digital signal from the DVD
Recorder & VCR to your TV.
What is the HDCP?
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content output via HDMI from being
copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc).
Content is encrypted at the source device to prevent unauthorized copies from being made.
22_ connecting & setting up
CONNECTING THE VIDEO OUTPUT
Besides HDMI, there are several other ways to connect your DVD Recorder & VCR.
Select one of the video connections on the following pages.
Connecting to Component Video Input Jacks (Y, PB, PR)
Connect Component video cables (not supplied) between the COMPONENT OUT (Y, PB, PR) jacks on the
DVD Recorder & VCR and COMPONENT IN (Y, PB, PR) jacks on your TV.
BlueGreen Red
● CONNECTING & SETTING UP
•
You will enjoy high quality images. Component video separates the picture element into black and white(Y),
B), red(PR) signals to present clear and clean images.
blue(P
•
Connect the audio cables(white and red) between the Component AUDIO OUT jacks on the DVD Recorder
& VCR and Component AUDIO IN jacks on your TV(or AV amplifi er). (See pages 24~25)
•
Progressive scan
- If your TV supports Progressive Scan, you can enjoy higher quality video by Progressive Scan Setting.
(The component cable has to be connected.)
Compared to standard interlaced video, progressive scan doubles the amount of video lines fed to your TV, resulting
M
in a clearer, more stable, and fl icker free image than interlaced video. The component output jack of the DVD player
can be used for progressive output mode, which is only available with TVs that support progressive scan.
Progressive Scan Output (480p)
Consumers should note that not all high defi nition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. If you experience 480p progressive scan picture problems, it is
recommended that you switch the connection to the ‘standard defi nition’ output. If there are questions regarding TV
set compatibility with this model, please contact our customer service center at 1-800-SAMSUNG.
The Component jacks will not output video resolutions above 480p. To view 720p, 1080i and 1080p connect the
DVD-VR375 to your TV with an HDMI-HDMI cable. With HDMI connected, set the progressive scan to alternate
between all available resolutions. (See page 31)
During DVD recording, you cannot watch VCR playback by pressing VCR, as the COMPONENT VIDEO OUT jacks will
output DVD video signals only.
English _23
connecting & setting up
Connecting to a Video Input Jack
Connect a video(yellow) cable between the VIDEO(yellow) OUT jack on the DVD Recorder & VCR and
VIDEO(yellow) IN jack on the TV.
RedYellow White
You will enjoy regular quality images.
•
This connection outputs the 480i resolution to your TV.
Connect the audio cables(white and red) between the AUDIO OUT jacks on the DVD Recorder & VCR and
•
AUDIO IN jacks on your TV(or AV amplifi er). (See pages 24~25)
CONNECTING THE AUDIO CABLE
Select one of the Audio connections on the following pages.
Connecting to your TV
This connection will use your TV’s speakers.
RedYellow White
24_ connecting & setting up
Connecting to a Stereo Amplifi er with Analog Input Jacks
If your stereo amplifi er only has AUDIO INPUT jacks(L and R), use the AUDIO OUT (AV OUT) jacks.
Red
White
Connecting to an AV Amplifi er with a Digital Input Jack
If your AV amplifi er has a Dolby Digital or DTS decoder and a digital input jack, use this connection.
To enjoy Dolby Digital or DTS sound, you will need to set up the audio settings. (See page 32~34)
● CONNECTING & SETTING UP
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending.
DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc.
© 1996-2007 DTS, Inc. All Rights Reserved.
English _25
connecting & setting up
CONNECTING EXTERNAL DEVICES
This allows you to connect your DVD Recorder & VCR to other external devices and view or record their outputs.
Connecting a VCR, Set top/Cable box, satellite receiver or DVD player
to the AV 1 IN Jack
Connecting a VCR or external device to AV 1 IN jacks of the DVD Recorder & VCR.
You can record from connected equipment (VCR, Set top/Cable box, satellite receiver or DVD).
M
RedYellow White
You can also use the AV 2 IN jacks on the front panel of the DVD Recorder & VCR.
Press the INPUT SEL. button to select AV1.
Copy protected content cannot be recorded.
Depending on your input connection, you must choose AV 1 (Composite). (See page 44)
26_ connecting & setting up
Connecting a Camcorder
You can record from connected equipment, such as a camcorder by using the AV2 IN or DV IN jacks on front
of the DVD Recorder & VCR.
RedYellow White
● CONNECTING & SETTING UP
M
Check your camcorder's owner's manual to see how to use the camcorder in this mode.
English _27
Loading...