Samsung DVD-V72K Instruction Manual

00078A DVD-V72K/XSA-GB1 6/25/02 11:42 AM Page 1

Instruction Manual

DVD-VCR

DVD-V72K

www.samsungvcr.com

Contents

◆ PLAYING BACK

■ Playing a Cassette......................................................................................... 33

■ Adjusting Picture Alignment Automatically.................................................... 33

■ Adjusting Picture Alignment Manually........................................................... 33

■ Selecting the Audio Output Mode.................................................................. 34

■ Playing a Cassette in Slow Motion................................................................ 34

■ Playing a Sequence Frame by Frame........................................................... 35

■ Playing a Sequence at Variable Speeds....................................................... 35

■ Searching for a Specific Sequence............................................................... 36

■ Using the Tape Counter................................................................................ 37

■ Connecting an RCA Audio/Video Input Cable............................................... 38

■ Using the Assemble Edit Function................................................................. 39

■ Recording from Another VCR or Camcorder................................................. 39

■ Audio Dubbing a Pre-recorded Cassette....................................................... 40

■ SQPB (Super VHS Quasi Playback)............................................................. 41

◆ KARAOKE F

UNCTIONS (VCR)

■ Using the KARAOKE Function...................................................................... 42

■ SCORE Function........................................................................................... 42

■ KARAOKE SEARCH Function...................................................................... 42

◆ DVD F

UNCTIONS

■ Choosing a Connection................................................................................. 43

■ Using the DVD SETUP.................................................................................. 44

■ Using the Disc Menu Language.................................................................... 45

■ Setting Up the Language Features................................................................ 46

■ Setting Up the Parental Control..................................................................... 47

■ Setting Up the Audio Options........................................................................ 48

■ Setting Up the Display Options...................................................................... 49

■ A/V Receiver Connections............................................................................. 50

■ Special Playback Features............................................................................ 51

■ Using the Display Function (DVD)................................................................. 52

■ Using the Display Function (CD/VCD)........................................................... 52

■ Repeat Play................................................................................................... 53

■ Program Play (DVD/VCD/CD)....................................................................... 54

■ Random Play (DVD/VCD/CD)....................................................................... 54

■ SCREEN FIT Play......................................................................................... 55

■ Digest Play.................................................................................................... 56

■ Using the Disc View Function........................................................................ 57

■ Selecting the Audio Language....................................................................... 58

■ Selecting the Subtitle Language.................................................................... 58

■ Changing the Camera Angle......................................................................... 59

■ Using the Bookmark Function....................................................................... 60

■ Using the Zoom & 3D Sound Functions........................................................ 61

■ MP3 Play....................................................................................................... 62

■ CD-R MP3 Disc Requirements...................................................................... 63

◆ KARAOKE F

UNCTIONS (DVD)

■ Beginning Karaoke Functions........................................................................ 64

■ Key Control.................................................................................................... 64

■ Reserving a Song.......................................................................................... 65

■ Cancellation of reservation............................................................................ 65

■ Vocal Fader................................................................................................... 66

■ Guide Melody................................................................................................ 66

■ Score Function.............................................................................................. 66

■ Types of Karaoke disc................................................................................... 66

◆ FOREWORD

■ Safety Instructions......................................................................................... 5

■ Disc Type and Characteristics....................................................................... 6

◆ DVD-VCR OVERVIEWS

■ Front View of the DVD-VCR.......................................................................... 7

■ Rear View of the DVD-VCR........................................................................... 7

■ Infrared Remote Control................................................................................ 8

■ Display Indicators.......................................................................................... 9

■ Accessories................................................................................................... 9

◆ C

ONNECTING YOUR DVD-VCR

■ Deciding How to Connect DVD-VCR............................................................. 10

■ Connecting DVD-VCR to the TV using the Coaxial Cable............................ 11

■ Connecting DVD-VCR to the TV using the RCA Cable................................. 11

■ Connecting Other Equipment to Your DVD-VCR.......................................... 12

■ Plug & Auto Set Up........................................................................................ 13

■ Tuning Your Television for the DVD-VCR..................................................... 14

■ Deck Control Keys......................................................................................... 15

■ Copying from DVD to VCR............................................................................ 16

■ Inserting Batteries in the Remote Control...................................................... 17

■ Setting the Date and Time............................................................................. 17

◆ S

ETTING UP YOUR DVD-VCR

■ Presetting the Stations Automatically............................................................ 18

■ Presetting the Stations Manually................................................................... 19

■ Clearing a Preset Station............................................................................... 20

■ Changing the Preset Station Table................................................................ 21

■ Setting the DVD-VCR Output Channel.......................................................... 22

■ Selecting the Colour Mode............................................................................ 22

■ Intelligent Picture Control.............................................................................. 23

■ Auto Power off............................................................................................... 23

■ G-CODE EXTEND......................................................................................... 24

■ Selecting the Cassette Type.......................................................................... 25

■ Auto Repeat Play........................................................................................... 25

■ Displaying/Hiding On-Screen Information..................................................... 26

■ Selecting the Recording Speed..................................................................... 26

■ Protecting a Recorded Cassette.................................................................... 27

■ Recording a Programme Immediately........................................................... 27

■ Recording a Programme with Automatic Stop............................................... 28

■ Using the G-CODE Feature........................................................................... 29

■ Modifying G-CODE Programming................................................................. 30

■ Using the Timer Programming Feature......................................................... 31

■ Checking a Preset Recording........................................................................ 32

■ Cancelling a Preset Recording...................................................................... 32

00078A DVD-V72K/XSA-GB1 6/25/02 11:42 AM Page 2

Contents (cont.)

The following illustrations represent precautions.

The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.

DO NOT OPEN THE DVD-VCR. Refer to service personnel.

00078A DVD-V72K/XSA-GB1 6/25/02 11:42 AM Page 4

Safety Instructions

◆ SOLVING PROBLEMS

■ Technical Specifications................................................................................ 67

■ Problems and Solutions (VCR)...................................................................... 68

■ Troubleshooting Guide (DVD)....................................................................... 69

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corpration and other rights owners. Use of this copyright protection technology must by authorized by Macrovision Corporized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Do NOT expose the DVD-VCR to extreme temperature conditions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%).

Do NOT expose the DVD-VCR to direct sunlight.

Do NOT expose the DVD-VCR to any liquids.

1 1

= Step number

Symbols

☛

➢

NoteImportantHold downPress/push

Do NOT place any objects on the DVD-VCR or remote control.

During a storm and/or lightning, unplug the DVD-VCR from the mains socket and aerial.

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL

ENVIRONMENTS

If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.

Disc Type and Characteristics

00078A DVD-V72K/XSA-GB1 6/25/02 11:42 AM Page 6

Front View of the DVD-VCR

This DVD player is capable of playing the following types of discs with the corresponding logos :

Disc Types

(Logos)

DVD

VIDEO-CD

AUDIO-CD

* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!

(CDGs play audio only, not graphics.)

Recording

Types

Audio

Video

Audio

Video

Audio

Disc Size

12 Cm

8 Cm

12 Cm

8 Cm

12 Cm

8 Cm

Disc Markings

• Playback Region Number

PAL

• PAL colour system in U.K, France, Germany, China etc.

N T S C

• NTSC broadcast system in USA, Canada, japan, South Korea, etc.

Max.

Playing

Time

Single-sided

240 min.

Double-sided

480 min.

Single-sided

80 min.

Double-sided

160 min.

74 min.

20 min.

74 min.

20 min.

• Dolby Digital disc

Characteristics

• DVD contains excellent s o u n d and video due to Dolby Digital and MPEG-2 system.

• Various screen and audio functions can be easily selected through the on-screen menu.

• Video with CD sound, VHS quality & MPEG-1 compression technology.

• An LP is recorded as an analog signal with more distortion. CD is recorded as a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time.

STEREO

• Stereo disc

DIGITAL

SOUND

• Digital Audio disc

• DTS disc

STANDBY/ON

BUTTON

REW /

SKIP BACK

BUTTON

PLAY/STILL BUTTON

DVD DECK

SKIP NEXT

BUTTON

F.F /

STOP BUTTON

OPEN/CLOSE BUTTON

RECORD BUTTON

VIDEO CASSETTE

COMPARTMENT

VOLUME BUTTONS

ECHO BUTTONS

DVD/VCR SELECT BUTTON

Rear View of the DVD-VCR

1 2 3 4 5 6 7 8 9

PROGRAMME SELECTION BUTTONS

COPY BUTTON

MIC JACK

EJECT BUTTON

Playback Region Number

Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is described on the rear panel of the player.

1 RF ANTENNA INPUT 2 RF OUT TO TV 3 LINE OUT TO TV (COMPOSITE) 4 LINE IN 1

5 AUDIO LINE OUT

(S-VIDEO OR COMPONENT)

6 COMPONENT VIDEO OUT 7 DIGITAL AUDIO OUT(COAXIAL) 8 DIGITAL AUDIO OUT(OPTICAL) 9 S-VIDEO OUT

Infrared Remote Control

You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR). Together with your DVD-VCR, you will find the following accessories in the box.

00078A DVD-V72K/XSA-GB1 6/25/02 11:42 AM Page 8

Display Indicators

1 2

3 4 5 6 7

10 11

12 13 14

15 16

18 19

20 21

22 23 24

25 26

27 28

29 30

31 32

33 34

35 36

1 STANDBY/ON 2 AUTO TRACKING/TRACKING +/- 3 AUDIO 4 SHUTTLE <</>> 5 MODE, REPEAT 6 KARAOKE SEARCH 7 ZOOM, SVHS 8 3D SOUND 9 DVD, VCR 10 KARAOKE 11 VOLUME 12 REWIND, SKIP BACK 13 STOP 14 RECORD 15 UP 16 LEFT 17 SETUP/ENTER 18 RETURN, A.DUB 19 TITLE, SPEED 20 OPEN/CLOSE 21 0-9 22 DISPLAY 23 CLOCK/COUNTER 24 ANGLE 25 CLEAR 26 SCREEN FIT 27 INPUT SEL. 28 DIGEST, F.ADV/STEP 29 PROG 30 FAST-FORWARD

SKIP NEXT

31 DISC MENU 32 PLAY/STILL 33 RIGHT 34 DOWN 35 MARK, INDEX 36 SUBTITLE, TIMER

1 2 3 4 5 6 7

8 9 10 11 12 13

1 The DVD Deck is active 2 A DVD, CD, VCD, or SVCD is loaded 3 The number to the right of the “TITLE” symbol is

the current title number

4 The time, counter position, time remaining or

current deck status is displayed

5 VHS tape is inserted 6 Recording is in progress (normal and timer) 7 The VCR Deck is active 8 3D Sound is active 9 A DVD with a DTS soundtrack is loaded

10 The number to the right of the “CHAP” symbol is

the current chapter number

11 The Hi-Fi track of a VHS tape is playing

(The current TV show or video is broadcast in Stereo)

12 A Timer Recording is programmed or in progress.

If blinking there is an error.

13 DVD to VHS copy is in progress

Accessories

REMOTE CONTROL

& BATTERIES

AUDIO & VIDEO

CABLE

OWNER’S

INSTRUCTIONS

COAXIAL CABLE

Deciding How to Connect DVD-VCR

You must take into account various factors when connecting audio or video systems:

◆ Types of connectors available on your systems

◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or

temporarily (camcorder for example)

Your DVD-VCR is equipped with the following connectors.

Connector Location Type Direction Recommended Use

LINE

Rear Audio/Video RCA In/Out ◆ Television

◆ Other VCR

Audio output Rear Audio RCA Out ◆ LINE Audio out (DVD only)

COMPONENT Rear RCA Out ◆ COMPONENT out (DVD only) output

S-VIDEO Rear S-JACK Out ◆ S-Video out (DVD only) output

Digital AUDIO Rear Optical Out ◆ Digital Audio out (DVD only) output coaxial

OUT TO TV Rear 75 Ω Out ◆ Television

coaxial

IN FROM ANT. Rear 75 Ω In ◆ Aerial

coaxial ◆ Cable television network

◆ Satellite receiver

☛ Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements

are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions

and associated safety precautions.

00078A DVD-V72K/XSA-GB1 6/25/02 11:42 AM Page 10

Connecting DVD-VCR to the TV using the Coaxial Cable

To receive television programmes a signal must be received from one of the following sources:

◆ An outdoor aerial

◆ An indoor aerial

◆ A cable television network

◆ A satellite receiver

☛ Make sure that both the television and the DVD-VCR are

switched

off before connecting the cables.

1 Remove the aerial or network input cable from the television. 2 Connect this cable to the 75Ω coaxial socket marked IN (PROM

ANT.) on the rear of your DVD-VCR.

3 Plug the coaxial cable supplied into the socket marked OUT (TO TV)

on your DVD-VCR.

4 Plug the other end of the coaxial cable into the connector

previously used for the aerial on the television.

5 To obtain better quality pictures and sound on your television, you

can also connect your DVD-VCR to the television via the RCA cable (see section below) if your television is equipped with this type of connection.

Connecting DVD-VCR to the TV using the RCA Cable

Aerial

RF coaxial cable

You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available on the television. You thus:

◆ Obtain better quality sound and pictures

◆ Simplify the setting up procedure of your DVD-VCR

☛ ◆ Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.

Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.

◆ Make sure that both the television and the DVD-VCR are switched

o f f before connecting the cables.

1 Connect the coaxial cable as indicated in the above section. 2 Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear

of the DVD-VCR.

3 Plug the other end into the appropriate connector on the television.

Your DVD-VCR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in memory. The process takes a few minutes. Your DVD-VCR will then be ready for use.

1 Connect the coaxial cable as indicated on page 11.

(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)

2 Plug the DVD-VCR into the mains.

Result: A message appears.

3 Press ENTER to start the auto scanning.

◆ The number of stations automatically stored by the DVD-VCR

depends on the number of stations that it has found.

4 On completion, press RETURN twice to exit the menu.

➢

◆

Auto preset can be performed by pressing (STOP) on the

DVD-VCR continuously for 5 seconds or more with no tape inserted.

00078A DVD-V72K/XSA-GB1 6/25/02 11:42 AM Page 12

Connecting Other Equipment to Your DVD-VCR

You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following illustrations give a few examples of the connection possibilities.

➢ The RCA input/output connectors on the rear of the DVD-VCR are used for equipment, such as

camcorders, VCRs or sound systems.

Camcorder

VCR

REAR OF THE DVD-VCR

Sound system

Plug & Auto Set up

PLEASE WAIT

■ ■■■ ■ ■■■ ■ ■■■

RETURN

AUTO SET UP

6 0

- - - - - - - I

12:00 1/JAN/2002

CLOCK SET

RETURN

TUE

Tuning Your Television for the DVD-VCR

The DVD-VCR uses one set of controls to operate both decks. The following keys are helpful in successfully controlling each deck.

1 STANDBY/ONButton

Press the STANDBY/ON button on the remote control or front

panel to turn on the DVD-VCR.

2 DVD Button

Press the DVD button on the remote control when you want to control the DVD deck.

◆ The DVD indicator will light on the Front Panel Display to show

that the DVD deck is selected.

3 VCR Button

Press the VCR button on remote control when you want to control the VCR deck.

◆ The VCR indicator will light on the Front Panel Display to show

that VHS deck is selected.

4 DVD-VCR Toggle

Press the SELECT button on the front panel to toggle control between the DVD deck and the VCR deck.

➢ Before using the VCR operation of 18~42 pages, press

the VCR button on the remote control to select VCR mode.

Before using the DVD operation of 43~66 pages, press the DVD button on the remote control to select and watch DVD.

00078A DVD-V72K/XSA-GB1 6/25/02 11:42 AM Page 14

Deck Control Keys

You must tune your television for the DVD-VCR only if you are not using a RCA cable

➢ To view pictures from your DVD-VCR when a RCA cable

is used, the television must be set to the audio/video

mode (AV).

1 Switch on the television. 2 Switch on the DVD-VCR by pressing STANDBY/ON on the front of

the DVD-VCR or STANDBY/ON on the remote control.

3 Select a programme position on the television to be reserved for

use with your DVD-VCR.

4 Insert the video cassette in the DVD-VCR. Check that the

DVD-VCR starts reading the cassette; if not, press

5 Start a scan on your television or set the television to UHF

channel 38.

6 Fine tune the television until the pictures and sound are obtained

clearly.

7 If you cannot find the pictures and sound, or there is interference

from nearby channels, it may be necessary to change the setting of the DVD-VCR output channel (see Setting the DVD-VCR Output Channel on page 22 and Problems and Solutions on page

68).

8 When the picture and sound are perfectly clear, store this channel

at the desired programme position on the television. Result: That programme is now reserved for use with your

DVD-VCR.

button

Inserting Batteries in the Remote Control

Setting the Date and Time

You must insert or replace the batteries in the remote control when you:

◆ Purchase the DVD-VCR

◆ Find that the remote control is no longer working

correctly

1 Push the tab in the direction of the arrow to release the battery

compartment cover on the rear of the remote control.

2 Insert two AA, R6 or equivalent batteries, taking care to respect

the polarities:

◆ + on the battery with + on the remote control

◆ – on the battery with – on the remote control

3 Replace the cover by aligning it with the base of the remote

control and pushing it back into place.

➢ Do not mix different battery types (manganese and

alkaline for example).

Your DVD-VCR contains a 24-hour clock and calendar used to:

◆ Automatically stop programme recording

◆ Preset your DVD-VCR to record a programme

automatically

You must set the date and time when:

◆ You purchase the DVD-VCR

1 Press SETUP on the remote control.

Result: The MAIN MENU is displayed.

2 Press the corresponding

or , buttons to select the

CLOCK option.

3 Press the ENTER button to select this option.

Result: The CLOCK SET menu is displayed.

4 Press or to select the hour, minutes, day, month and year.

Result: The option selected flashes.

5 Press the or buttons to increase or decrease the value.

Result: The day of the week is displayed automatically.

➢ You can hold the

or buttons down to scroll more

quickly through the values.

6 On completion, press RETURN to exit the menu.

RETURN

CLOCK SET

12:00 1/JAN/2002

TUE

MAIN MENU

CLOCK SET

RETURN ENTER

00078A DVD-V72K/XSA-GB1 6/25/02 11:42 AM Page 16

Copying from DVD to VCR

The DVD-VCR allows you to copy the contents of a DVD to a VHS tape with a press of the COPY button.

If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision® encoded DVDs.

1 Insert Disc

Insert the disc you wish to copy in the DVD deck and close the drawer.

2 Insert VHS Tape

Insert a blank VHS videotape into the VCR deck.

3 Copy the DVD to VHS Tape

Press the COPY button on the DVD-VCR front panel.

◆ The DVD will go into Play mode and the VCR will go into Record

mode.

4 Stop the Copy Process

When the DVD is finished playing, press the VCR button on the remote control and then press the STOP button to end the copy.

◆ You must stop the Copy process manually when the DVD movie

ends or the DVD may replay and record over and over again.

☛ For NTSC DVD or VCD copy

◆ Before starting the copy process, set the Quasi PAL to

Off in Display options of SETUP MENU (see page 49).

◆ If Quasi PAL is On, the copy process can not active.

◆ The copy is only active PAL tape system.

00078A DVD-V72K/XSA-GB2 6/25/02 11:43 AM Page 18

VCR VCR

RETURN ENTER

Presetting the Stations Automatically

You do not need to preset the stations if you have already

☛

set them automatically (see Plug & Auto Set Up on page 13).

MAIN MENU

INSTALLATION

Your DVD-VCR contains a built-in tuner used to receive television broadcasts.

You must preset the stations received through the tuner. This can be done:

◆ Plug & Auto Set up (see page 13)

◆ Automatically

◆ Manually (see page 19)

You can store up to 80 stations.

1 Press the SETUP button on the remote control.

AUTO SET UP

MANUAL SET UP VCR OUTPUT CH :CH38

RETURN ENTER

YOUR DATA WILL BE LOST

PRESS E N T E R TO CONTINUE

I - - - - - - - - - - - - - - - - - - - - I

RETURN

INSTALLATION

R E T U R N TO EXIT

AUTO SET UP

PLEASE WAIT

Result: The MAIN MENU is displayed.

2 Press the corresponding

I n s t a l l option.

3 Press the ENTER button to select this option.

Result: The I N S T A L L A T I O N menu is displayed.

4 Press the corresponding or buttons, until the AUTO SET

U P

option is selected. And then press the ENTER button to select this option. Result: A message appears, indicating that any channels

already preset on your DVD-VCR will be deleted.

5 Press ENTER to start the auto scanning.

Result: ◆ The PLEASE WAITindication flashes on the

➢ The number of stations automatically stored by the DVD-

6 If you wish to cancel the auto scanning before the end, press the

RETURN button three times to exit the menu.

➢ ◆ Once the auto scanning procedure has finished, some

television screen.

◆ The first frequency band is scanned and the first

station found is displayed and stored.

◆ The DVD-VCR then searches for the second station

and so on.

◆ When the automatic scanning procedure has

finished, the DVD-VCR switches automatically to programme 1.

VCR depends on the number of stations that it has found.

stations may have been stored more than once; select the stations with the best reception and delete the ones no longer required (see page 20).

or , buttons to select the

Presetting the Stations Manually

☛ You do not need to preset the stations manually if you

have already set them automatically.

1 Press the SETUP button on the remote control.

Result: The MAIN MENU is displayed.

2 Press the corresponding

Install option.

3 Press the ENTER button to select this option.

Result: The I N S T A L L A T I O N menu is displayed.

4 Press the corresponding or buttons, until the MANUAL SET

U P option is selected.

5 Press the ENTER button to select a MANUAL SET UP option.

Result: The TV STATION TABLE menu is displayed.

6 Press the or buttons to select a programme number as

required.

7 Press the button to preset the station.

Result: The MANUAL TUNING menu is displayed.

8 Press the or buttons to start scanning.

Result: The frequency band is scanned and the first station

found is displayed.

9 Press the or buttons until the N A M E is selected.

The station name is set automatically from the broadcast signal.

10 To change the programme’s name, press the button.

Result: The first letter of the name flashes.

11 To... Then...

Select a character Press the orbutton until the in the name required character is displayed

Move to the next or Press the or buttons previous character respectively.

12 If you... Then...

Wish to store the ◆ Press the or buttons until the M F T station displayed is selected.

Do notwish to ◆ Press the or buttons until the store the station C H is selected. displayed ◆ Press the or buttons to go on

13 Repeat this procedure from Step 6 onwards, until all the required

stations have been stored.

14 On completion, press the RETURN button three times to exit the

menu.

or , buttons to select the

(letters, numbers or “-” character).

◆ Press the or buttons to adjust the

picture, if necessary.

◆ Press ENTER to store the station

scanning the frequency band and display the next station

◆ Go back to the beginning of step 12

MAIN MENU

INSTALLATION

RETURN ENTER

2 3 4 5

INSTALLATION

TV STATION TABLE

SWAPPING:ENTER

MANUAL TUNING

MEMORY:ENTER

AUTO SET UP

MANUAL SET UP

VCR OUTPUT CH :CH38

RETURN ENTER

PR CH NAME

RETURN DELETE:CLEAR

P R : 1

C H : ---

M F T : N A M E : ----

RETURN

00078A DVD-V72K/XSA-GB2 6/25/02 11:43 AM Page 20

Clearing a Preset Station

MAIN MENU

INSTALLATION

RETURN ENTER

AUTO SET UP

MANUAL SET UP

VCR OUTPUT CH :CH38

RETURN ENTER

PR CH NAME

1 0 0 3

2 3 4 5

RETURN DELETE:CLEAR

INSTALLATION

TV STATION TABLE

SWAPPING:ENTER

If you have stored a TV station:

◆ That you do not require

◆ At the wrong programme position

you can cancel it.

1 Press the SETUP button on the remote control. 2 Press the corresponding

Install option.

3 Press the ENTER button to select this option.

Result: The I N S T A L L A I O N menu is displayed.

4 Press the corresponding or buttons, until the MANUAL SET

U P option is selected.

5 Press the ENTER button to select this option.

Result: The TV STATION TABLE menu is displayed.

6 Press the corresponding or buttons, until the required preset

TV station is selected. (P R)

or , buttons to select the

7 Press the CLEAR button. 8 Repeat the same procedure from Step 6 onwards until all the

required stations have been cleared.

9 On completion, press the RETURN button three times to exit the

menu.

Changing the Preset Station Table

You can rearrange the Station Table and give different programme numbers to the stations listed according to your own preferences.

1 Press the SETUP button on the remote control. 2 Press the corresponding

In s t a l l option.

3 Press the ENTER button to select this option.

Result: The I N S T A L L A T I O N menu is displayed.

4 Press the corresponding or buttons, until the MANUAL SET

U P option is selected.

5 Press the ENTER button to select this option.

Result: The TV STATION TABLE menu is displayed.

6 Press the corresponding or buttons, until the cursor is placed

on the required preset TV programme. Result: The selected station is displayed at the same time on

the television screen.

7 To change the programme number assigned to a station (PR3

instead of PR1 for example):

◆ Press ENTER

◆ Press the

programme to which the station is to be moved

◆ Press ENTER again

8 You can modify this station by repeating the same procedure from

Step 6 onwards.

9 On completion, press the RETUTN button three times to exit the

menu.

or buttons until the cursor is placed on the

or , buttons to select the

VCRVCR

MAIN MENU

INSTALLATION

RETURN ENTER

AUTO SET UP

MANUAL SET UP

VCR OUTPUT CH :CH38

RETURN ENTER

PR CH NAME

1 0 0 3

2 3 4 5

RETURN DELETE:CLEAR

PR CH NAME

1 2

3 0 0 3

4 5

RETURN DELETE:CLEAR

INSTALLATION

TV STATION TABLE

SWAPPING:ENTER

TV STATION TABLE

SWAPPING:ENTER

00078A DVD-V72K/XSA-GB2 6/25/02 11:43 AM Page 22

AUTO SET UP MANUAL SET UP

VCR OUTPUT CH :CH38

RETURN

COLOUR SYSTEM : A U T O

IPC : O N AUTO POWER OFF : O F F G-CODE EXTEND : O F F

RETURN

VCR

RETURN ENTER

VCR

USER SET

RETURN ENTER

Setting the DVD-VCR Output Channel

MAIN MENU

INSTALLATION

Selecting the Colour Mode

MAIN MENU

USER SET

CH28

CH38

CH69

AUTO PAL M E S E C A M B/W

Your DVD-VCR output channel may need to be changed if the pictures suffer from interference or if your TV cannot find the pictures. Also, you can change the DVD-VCR output channel to adjust the frequency in which information is displayed on the screen.

1 Press SETUP on the remote control.

Result: The MAIN MENU is displayed.

2 Press the corresponding

I n s t a l l option.

3 Press the ENTER button to select this option.

Result: The I N S T A L L A T I O N menu is displayed.

4 Press the or buttons, until the cursor is placed on the V C R

OUTPUT CH option.

5 Select the required output channel (CH28~CH69) by pressing the

or buttons.

6 On completion, press RETURN to exit the menu.

Then tune your television again (see page 14).

Before recording or playing back a cassette, you can select the required system standard.

Otherwise, the system automatically selects the reception standard when you select AUTO.

➢

◆ When playing back a cassette, the standard is

automatically selected by the DVD-VCR.

◆ When you playback an NTSC-recorded tape on this DVDVCR make a setting on the colour system according to your TV. If your TV is a PAL system only TV, set NTPB. If your TV is Multi System TV (NTSC 4.43 compatible), set NT4.43 and you can record NT4.43.

1 Press SETUP on the remote control.

Result: The MAIN MENU is displayed.

2 Press the corresponding

O p t i o n option.

3 Press the ENTER button to select this option.

Result: The USER SET menu is displayed.

4 Press the corresponding or buttons, until the cursor is placed

on the COLOUR SYSTEM option.

5 Press the button to select AUTO ➝ P A L

AUTO When playing back a cassette, the system standard is

automatically selected by the DVD-VCR.

or , buttons to select the

➝

M E S E C A M➝ B / W.

B/W Black and White

6 On completion, press RETURN twice to exit the menu.

Intelligent Picture Control

The Intelligent Picture Control Feature allows you to adjust the sharpness of the image automatically, according to your own preferences.

1 During playback, press the SETUP button on the remote control.

Result: The MAIN MENU is displayed.

2 Press the corresponding , or , buttons to select the

O p t i o n option.

3 Press the ENTER button to select this option.

Result: The USER SET menu is displayed.

4 Press the corresponding or buttons, until the cursor is

placed on the I P C option.

5 Press the or button to select the IPC (intelligent picture

control) option.

➢ When intelligent picture control mode is O N, the sharpness

6 To adjust the sharpness manually, press the

7 Press the or buttons until the picture is displayed according to

of the image is adjusted automatically.

IPC mode

O F F

button to turn the

your preferences.

➢ If you do not press a button within ten seconds, the

PICTURE menu disappears automatically.

8 On completion, press the RETURN button again.

Auto Power Off

The Auto Power Off feature automatically turns off your DVD-VCR if no signal is received and you do not press any button for the selected time.

1 Press SETUP on the remote control.

Result: The MAIN MENU is displayed.

2 Press the corresponding

O p t i o n option.

3 Press the ENTER button to select this option.

Result: The USER SET menu is displayed.

4 Press the corresponding o r buttons, until the cursor is

placed on the AUTO POWER OFF option.

5 Press the button, until you select the time of Auto Power off

interval.

OFF 2HOUR 3HOUR

6 On completion, press RETURNtwice to exit the menu.

or , buttons to select the

VCR

MAIN MENU

USER SET

RETURN ENTER

COLOUR SYSTEM : A U T O

IPC : O N

AUTO POWER OFF : O F F G-CODE EXTEND : O F F

RETURN

USER SET

VCR

MAIN MENU

USER SET

RETURN ENTER

COLOUR SYSTEM : A U T O IPC : O N

AUTO POWER OFF : O F F

G-CODE EXTEND : O F F

RETURN

USER SET

ON OFF

OFF 2 H O U R 3 H O U R

+ 25 hidden pages