Samsung DVD-V540, DVD-V340, DVD-V440 User Manual

OPEN/CLOSE

STANDBY/ON

Instruction Manual

DVD-V540 DVD-V440 DVD-V340

AK68-00413B

PAL/NTSC

www.samsungvcr.com

Remote Control Overview

OPEN/CLOSE

STANDBY/ON

OPEN/CLOSE

STANDBY/ON

(DVD-V440/V340)(DVD-V540)

Contents



Foreword

Safety Instructions . . . . . . . . . . . . . . . . . . . . . 3

Disc Type and Characteristics . . . . . . . . . . . . 4



DVD-VCR Overviews

Front View of the DVD-VCR . . . . . . . . . . . . . 5

Rear View of the DVD-VCR . . . . . . . . . . . . . . 6

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 6

Display Indicators . . . . . . . . . . . . . . . . . . . . . 7



Connecting Your DVD-VCR

Inserting Batteries in the Remote Control . . . . 7

Connecting DVD-VCR to the TV

using the Coaxial Cable . . . . . . . . . . . . . . . . 7

Connecting DVD-VCR to the TV

using the RCA Cable . . . . . . . . . . . . . . . . . . . 8

Connecting DVD-VCR to a Satellite

Receiver or Other Equipment . . . . . . . . . . . . 8

Plug & Auto Set up . . . . . . . . . . . . . . . . . . . . 9

Tuning Your Television for the DVD-VCR . . . . 9

Deck Control Keys . . . . . . . . . . . . . . . . . . . . 10

Copying from DVD to VCR . . . . . . . . . . . . . . 10

Setting the Date and Time . . . . . . . . . . . . . . . 11

Setting the Menu Language . . . . . . . . . . . . . . 11



Setting Up Your DVD-VCR

Presetting the Stations Automatically . . . . . . . 12

Presetting the Stations Manually . . . . . . . . . . 13

Clearing a Preset Station . . . . . . . . . . . . . . . . 14

Changing the Preset Station Table . . . . . . . . . 14

Selecting the RF OUT Sound Mode

(B/G-D/K) . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Setting the DVD-VCR Output Channel . . . . . . 15

Selecting the Colour Mode . . . . . . . . . . . . . . 16

NICAM ★(DVD-V540/DVD-V440) . . . . . . . . . 16

Intelligent Picture Control . . . . . . . . . . . . . . . 17

Auto Power off . . . . . . . . . . . . . . . . . . . . . . . 17

Screen Messages . . . . . . . . . . . . . . . . . . . . . 17

Selecting the Cassette Type . . . . . . . . . . . . . 18

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . 18



Recording Television Broadcasts

Selecting the Recording Speed . . . . . . . . . . . 18

S-VHS Play . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Recording a Programme Immediately . . . . . . 19

Protecting a Recorded Cassette . . . . . . . . . . 19

Recording a Programme with Automatic Stop 19

Using the Timer Programming Feature . . . . . 20

Checking a Preset Recording . . . . . . . . . . . . 20

Cancelling a Preset Recording . . . . . . . . . . . 21



Playing Back

Playing a Cassette . . . . . . . . . . . . . . . . . . . . 21

Adjusting Picture Alignment Manually . . . . . . 21

Selecting the Audio Output Mode . . . . . . . . . 21

Playing a Cassette in Slow Motion . . . . . . . . . 22

Playing a Sequence Frame by Frame . . . . . . 22

Playing a Sequence at Variable Speeds . . . . 22

Searching for a Specific Sequence . . . . . . . . 22

Using the Tape Counter . . . . . . . . . . . . . . . . . 23

Using the Assemble Edit Function . . . . . . . . . 24

Connecting an RCAAudio/Video Input Cable . 24 Recording from Another VCR or Camcorder . 25 Using the TV Buttons on the

Remote Control ★(DVD-V540 Only) . . . . . . . 25



DVD Functions

Choosing a Connection . . . . . . . . . . . . . . . . . 26

Setting Up the Language Features . . . . . . . . 26

Setting Up the Audio Options . . . . . . . . . . . . .28

Setting Up the Display Options . . . . . . . . . . . 29

Setting Up the Parental Control . . . . . . . . . . . 30

A/V Receiver Connections . . . . . . . . . . . . . . . 31

Special Playback Features . . . . . . . . . . . . . . 31

Component Connections (for DVD)

★

(DVD-V540/DVD-V440) . . . . . . . . . . . . . . . 32

Adjusting the Aspect Ratio (EZ View) . . . . . . 33

Using the Display Function . . . . . . . . . . . . . . 34

Changing the Camera Angle . . . . . . . . . . . . . 35

Selecting the Subtitle Language . . . . . . . . . . 35

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . 36

Selecting the Audio Language . . . . . . . . . . . .36

Using the Mark Function . . . . . . . . . . . . . . . . 37

MP3/WMA Play . . . . . . . . . . . . . . . . . . . . . . . 37

Program Play & Random Play . . . . . . . . . . . . 39

Picture CD Playback . . . . . . . . . . . . . . . . . . . 39

DivX/XviD/MPEG4 Special Playback

Features ★(DVD-V540/DVD-V440) . . . . . . . . 41

DivX/XviD/MPEG4 Playback

★

(DVD-V540/DVD-V440) . . . . . . . . . . . . . . . 42



Solving Problems

Technical Specifications . . . . . . . . . . . . . . . . 43

Problems and Solutions (VCR) . . . . . . . . . . . 44

Troubleshooting Guide (DVD) . . . . . . . . . . . . 45

ENG-2

Safety Instructions

5°C

40°C

10% 75%

The following illustrations represent precautions.

The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.

DO NOT OPEN THE DVD-VCR. Refer to service personnel.

Do NOT expose the DVD-VCR to extreme temperature conditions

Do NOT expose the DVD-VCR to direct sunlight.

Do NOT expose the DVD-VCR to

any liquids. (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%).

Do NOT place any objects on the DVD-VCR or remote control.

During a storm and/or lightning, unplug the DVD-VCR from the mains socket and aerial.

If the remote control is not used for

a long period of time, remove the

batteries and store it in a cool, dry

place.

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL

ENVIRONMENTS

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must by authorized by Macrovision Corporized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

ENG-3

Disc Type and Characteristics

This DVD player is capable of playing the following types of discs with the corresponding logos :

Disc Types (Logos)

DVD

VIDEO-CD

Recording Types

Audio

Video

Audio

Disc Size Max. Playing Time Characteristics

12 Cm

8 Cm

12 Cm

Single-sided 240 min. Double-sided 480 min.

Single-sided 80 min. Double-sided 160 min.

74 min.

• DVD contains excellent sound and video due to Dolby Digital and MPEG-2 system.

• Various screen and audio functions can be easily selected through the on-screen menu.

• Video with CD sound, VHS quality & MPEG-1 compression technology.

Video

AUDIO-CD

Audio

* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!

(CDGs play audio only, not graphics.)

* It may not be to play CD-R,CD-RW and DVD-R in all cases due to the type of disc or condition of the recording.

Disc Markings

• Play Region Number

PAL

NTSC

• PALcolour system in Australia, Newzealand, etc.

• NTSC broadcast system in U.S.A, Canada,

Korea, Japan, etc.

8 Cm

12 Cm

8 Cm

20 min.

74 min.

20 min.

Play Region Number

Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is described on the rear panel of the player.

• An LP is recorded as an analog signal with more distortion. CD is recorded as a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time.

STEREO

DIGITAL

SOUND

• Dolby Digital disc

• Stereo disc

• Digital Audio disc

• DTS disc

• Disc contains a Divx software product

ENG-4

Front View of the DVD-VCR

(DVD-V540)

5 6 7 8 9 10 11 12 13 14 15 16

1 DVD DECK 2 OPEN/CLOSE BUTTON 3 VIDEO CASSETE COMPARTMENT 4 EJECT BUTTON 5 STANDBY/ON BUTTON 6 REW/SKIP BACK BUTTON

(DVD-V440)

3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 DVD DECK 2 VIDEO CASSETE COMPARTMENT 3 STANDBY/ON BUTTON 4 REW/SKIP BACK BUTTON 5 STOP BUTTON 6 PLAY/STILLBUTTON

1 2 3 4

7 STOP BUTTON 8 PLAY/STILLBUTTON 9 F.F / SKIP NEXT BUTTON 10 RECORD BUTTON 11 COPY BUTTON 12 PROGRAME SELECTION BUTTON

7 F.F / SKIP NEXT BUTTON 8 RECORD BUTTON 9 COPY BUTTON 10 OPEN/CLOSE BUTTON 11 PROGRAME SELECTION BUTTON 12 DVD / VCR SELECT BUTTON

13 DVD / VCR SELECT BUTTON 14 PROGRESSIVE BUTTON 15 LINE IN2 VIDEO INPUT JACK 16 LINE IN2 AUDIO L, R INPUT JACK

13 PROGRESSIVE BUTTON 14 LINE IN2 VIDEO INPUT JACK 15 LINE IN2 AUDIO L, R INPUT JACK 16 EJECT BUTTON

(DVD-V340)

3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 DVD DECK 2 VIDEO CASSETE COMPARTMENT 3 STANDBY/ON BUTTON 4 REW/SKIP BACK BUTTON 5 STOP BUTTON 6 PLAY/STILLBUTTON

7 F.F / SKIP NEXT BUTTON 8 RECORD BUTTON 9 EZ VIEW BUTTON 10 OPEN/CLOSE BUTTON 11 PROGRAME SELECTION BUTTON 12 DVD SELECT BUTTON

ENG-5

13 VCR SELECT BUTTON 14 LINE IN2 VIDEO INPUT JACK 15 LINE IN2 AUDIO INPUT JACK 16 EJECT BUTTON

Rear View of the DVD-VCR

O P E

N / C L O S

S T A N D

B Y / O N

(DVD-V540/DVD-V440)

1 2 3 4 5 6 7 8 9

1 RF ANTENNA INPUT 2 RF OUT TO TV 3 LINE IN 1 4 LINE OUT TO TV (COMPOSITE)

(DVD-V340)

1 RF ANTENNA INPUT 2 RF OUT TO TV 3 LINE IN 1 4 LINE OUT TO TV (COMPOSITE)

Accessories

5 AUDIO LINE OUT TO TV

(S-VIDEO OR COMPONENT)

6 DIGITALAUDIO OUT SOCKET

(COAXIAL)

1 2 3 4 5 6 7 8

5 AUDIO LINE OUT TO TV

(S-VIDEO OR COMPONENT)

6 DIGITALAUDIO OUT SOCKET

(COAXIAL)

7 COMPONENT VIDEO OUT 8 DIGITALAUDIO OUT SOCKET

(OPTICAL)

9 S-VIDEO OUT JACK

7 COMPONENT VIDEO OUT 8 S-VIDEO OUT JACK

You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR). Together with your DVD-VCR, you will find the following accessories in the box.

REMOTE CONTROL

& BATTERIES

AUDIO & VIDEO

CABLE

★

(DVD-540/SV-DVD440)

OWNER’S

INSTRUCTIONS

ENG-6

COAXIAL CABLE

Display Indicators

1 2 3 4 5

1 The DVD Deck is active 2 A DVD, CD, VCD, or SVCD is loaded 3 The time, counter position, time remaining or

current deck status is displayed

4 VHS tape is inserted 5 The VCR Deck is active 6 ATimer Recording is programmed or in progress.

Inserting Batteries in the Remote Control

You must insert or replace the batteries in the remote control when you:

◆

Purchase the DVD-VCR

◆

Find that the remote control is no longer working correctly

1 Push the tab in the direction of the arrow to release

the battery compartment cover on the rear of the remote control.

2 Insert two AAA, RO3 or equivalent batteries, taking

care to respect the polarities:

◆

+ on the battery with + on the remote control

◆

– on the battery with – on the remote control

3 Replace the cover by aligning it with the base of

the remote control and pushing it back into place.

Connecting DVD-VCR to the TV using the Coaxial Cable

To receive television programmes a signal must be received from one of the following sources:

◆

An outdoor aerial

◆

An indoor aerial

◆

A cable television network

◆

A satellite receiver

☛

Make sure that both the television and the DVDVCR are switched off before connecting the cables.

1 Remove the aerial or network input cable from the

television.

2 Connect this cable to the 75Ω coaxial socket

marked on the rear of your DVD-VCR.

3 Plug the coaxial cable supplied into the socket

on your DVD-VCR.

4 Plug the other end of the coaxial cable into the

connector previously used for the aerial on the television.

5 To obtain better quality pictures and sound on your

television, you can also connect your DVD-VCR to the television via the RCA cable (see next page) if your television is equipped with this type of connection.

➢

Do not mix different battery types (manganese and alkaline for example).

ENG-7

Connecting DVD-VCR to the TV using the RCA Cable

You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available on the television. You thus:

◆

Obtain better quality sound and pictures

◆

Simplify the setting up procedure of your DVD-VCR

☛

Regardless of the type of connection chosen, you must always connect the coaxial cable supplied. Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.

☛

Make sure that both the television and the DVDVCR are switched off before connecting the cables.

1 Connect the coaxial cable as indicated on page 7. 2 Connect one end of the RCA Audio/Video cable to

the Video output and Audio L, R output socket on the rear of the DVD-VCR.

3 Plug the other end into the appropriate connector

on the television.

Aerial

Connecting DVD-VCR to a Satellite Receiver or Other Equipment

You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following illustrations give a few examples of the connection possibilities.

➢

The RCA input/output connectors on the rear of the DVD-VCR are used for equipment, such as camcorders, VCRs or sound systems.

Camcorder

VCR

REAR OF THE

DVD-VCR

Sound system

RF coaxial cable

ENG-8

Plug & Auto Set up

Auto setup

Please wait

00 %

Clock Set

12 : 00 1/JAN 2004

THU

Time Date Year

Tuning Your Television for the DVD-VCR

Your DVD-VCR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in memory. The process takes a few minutes. Your DVD-VCR will then be ready for use.

1 Connect the coaxial cable as indicated on page 7.

(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)

2 Plug the DVD-VCR into the mains.

The Language Set menu is displayed.

Result:

3 Select the required language by pressing the

❷

buttons.



4 Press OK to store the language selected.

A message appears.

Result:

5 Press OK to start the auto scanning.

◆

The number of stations automatically stored by theVCR depends on the number of stations that it has found.

You must tune your television for the DVD-VCR only if you are not using a RCA cable

➢

To view pictures from your DVD-VCR when a RCA cable is used, the television must be set to the audio/video mode (AV).

1 Switch on the television. 2 Switch on the DVD-VCR by pressing STANDBY/ON

on the front of the DVD-VCR or STANDBY/ON on the remote control.

3 Select a programme position on the television to be

reserved for use with your DVD-VCR.

4 Insert the video cassette in the DVD-VCR. Check

that the DVD-VCR starts reading the cassette; if not, press

❿

button.

5 Start a scan on your television or set the television

to UHF channel 36.

6 Fine tune the television until the pictures and sound

are obtained clearly.

7 If you cannot find the pictures and sound, or there

is interference from nearby channels, it may be necessary to change the setting of the DVD-VCR output channel (see Setting the DVD-VCR Output Channel on page 14 and Problems and Solutions on page 44).

8 When the picture and sound are perfectly clear,

store this channel at the desired programme position on the television. Result: That programme is now reserved for use

with your DVD-VCR.

➢

Auto preset can be performed by pressing ■on the VCR continuously for 5 seconds or more with no tape inserted.

ENG-9

Deck Control Keys

Copying from DVD to VCR

The DVD-VCR uses one set of controls to operate both decks. The following keys are helpful in successfully controlling each deck.

1 STANDBY/ON Button

Press the STANDBY/ON button on the remote control or front panel to turn on the DVD-VCR.

2 DVD Button

Press the DVD button on the remote control when you want to control the DVD deck.

◆

The DVD indicator will light on the Front Panel Display to show that the DVD deck is selected.

3 VCR Button

Press the VCR button on remote control when you want to control the VCR deck.

◆

The VCR indicator will light on the Front Panel Display to show that VHS deck is selected.

4 INPUT SEL. Button

Press the INPUT SEL. button repeatedly to cycle through all of your input sources, including the Tuner (PR##), Line 1 (rear AV input), and Line 2 (front AV input).

• Input select is only available when the VCR deck is selected.

➢

Before using the VCR operation of 11~25 pages, press the VCR button on the remote control to select VCR mode.

Before using the DVD operation of 26~42 pages, press the DVD button on the remote control to select and watch DVD.

The DVD-VCR allows you to copy the contents of a DVD to a VHS tape with a press of the COPY button.

If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision® encoded DVDs.

1 Insert Disc

Insert the disc you wish to copy in the DVD deck and close the drawer.

2 Insert VHS Tape

Insert a blank VHS videotape into the VCR deck.

3 Copy the DVD to VHS Tape

Press the COPY button on the DVD-VCR front panel.

◆

The DVD will go into Play mode and the VCR will go into Record mode.

◆

If the DVD disc menu appears, you may need to press the PLAY button manually to begin copying.

4 Stop the Copy Process

When the DVD is finished playing, press the VCR button on the remote control and then press the STOP button to end the copy.

◆

You must stop the Copy process manually when the DVD movie ends or the DVD may replay and record over and over again.

ENG-10

Setting the Menu LanguageSetting the Date and Time

Time Date Year

Clock Set

12 : 00 1 / JAN / 2004 THU

Français Deutsch Español Nederlands

Language Set

English

Your DVD-VCR contains a 24-hour clock and calendar used to:

◆

Automatically stop programme recording

◆

Preset your DVD-VCR to record a programme automatically

You must set the date and time when:

◆

You purchase the DVD-VCR

◆

☛

Do not forget to reset the time when you change clocks from winter to summer time and vice versa.

1 After pressing the MENU, press the OK or

❿

Result: The Setup menu is displayed.

2 Press the corresponding ,

❷

buttons to select

the Clock option.

3 Press the OK or

❿

to select this option.

Result: The Clock Set menu is displayed.

1 After pressing the MENU, press the OK or

❿

Result: The Setup menu is displayed.

2 Use the ,

❷

buttons to highlight

Language, then press the OK or ❿.

3 Place the selection arrow next to your desired

Language, then press the OK button.

4 On completion, press RETURN to exit the menu.

4 Press

➛

or ❿to select the hour, minutes, day, month and year. Result: The option selected highlight.

5 Press the

➛

or ❿buttons to increase or decrease the value. Result: The day of the week is displayed

automatically.

➢

You can hold the

,❷

buttons down to scroll

more quickly through the values.

6 On completion, press RETURN to exit the menu.

ENG-11

Presetting the Stations Automatically

Auto Setup

Manual Setup TV System : G VCR Output CH : CH 36

Install

Auto Setup

Your data will be lost

Press OK to continue Menu to exit

Auto Setup

Please Wait 15%

You do not need to preset the stations if you

☛

have already set them automatically (see Plug & Auto Set Up on page 9).

Your DVD-VCR contains a built-in tuner used to receive television broadcasts.

You must preset the stations received through the tuner. This can be done:

◆

Plug & Auto Set up (see page 9)

◆

Automatically

◆

Manually (see page 13)

You can store up to 80 stations.

1 After pressing the MENU, press the OK or

❿

Result: The Setup menu is displayed.

2 Press the corresponding ,

❷

buttons to select

the Install option.

3 Press the OK or

❿

to select this option.

Result: The Install menu is displayed.

4 Press the corresponding ,

❷

buttons, until the Auto Setup is selected. And then press the OK or ❿to select this option. Result: A message appears, indicating that any

channels already preset on your DVD-VCR will be deleted.

5 Press OK to start the auto scanning.

Result:◆The Please Wait indication highlight on

the television screen.

◆

The first frequency band is scanned and the first station found is displayed and stored.

◆

The DVD-VCR then searches for the second station and so on.

◆

When the automatic scanning procedure has finished, the DVD-VCR switches automatically to programme 1.

➢

The number of stations automatically stored by the DVD-VCR depends on the number of stations that it has found.

7 If you wish to cancel the auto scanning before the

end, press the MENU button to exit the menu.

➢

Once the auto scanning procedure has finished, some stations may have been stored more than once; select the stations with the best reception and delete the ones no longer required . (See page 14)

ENG-12

MANUAL TUNING

PR : 1 CH : - - MFT : NAME : - - - -

MEMORY : OK

RETURN

Presetting the Stations Manually

Auto Setup

Manual Setup

Install

TV System : G VCR Output CH : CH 36

TV STATION TABLE

PR CH NAME 1 2 3 4 5

SWAPPING : OK DELETE : CLEAR RETURN

You do not need to preset the stations manually if

☛

you have already set them automatically.

1 After pressing the MENU, press the OK or

❿

Result: The Setup menu is displayed.

2 Press the corresponding ,

❷

buttons to select the

Install option.

3 Press the OK or

❿

to select this option.

Result: The Install menu is displayed.

4 Press the corresponding ,

❷

buttons, until the

Manual Setup option is selected.

5 Press the OK or

❿

to select a Manual Setup option.

Result: The TV STATION TABLE menu is displayed.

9 Press the ,

❷

buttons until the NAME is selected. The station name is set automatically from the broadcast signal.

10 To change the programme’s name, press the

❿

button.

Result: The first letter of the name flashes.

11 To... Then...

Select a character Press the in the name required character is displayed

(letters, numbers or “-” character).

Move to the next or Press the previous character respectively.

,❷

button until the

➛

or ❿buttons

12 If you... Then...

Wish to store the station displayed until the MFT is selected.

Do not wish to store the station until the CH is selected. displayed

◆

Press the

◆

Press the

,❷

➛,❿

buttons

buttons to

adjust the picture, if necessary.

◆

Press OK to store the station

◆

Press the

◆

Press the

,❷

➛,❿

buttons

buttons to

go on scanning the

frequency band and display the next station

◆

Go back to the beginning of

Step 14

6 Press the ,

❷

buttons to select a programme

number as required.

7 Press the

❿

button to preset the station.

Result: The MANUAL TUNING menu is displayed.

8 Press the

channels. Result: The frequency band is scanned and the

first station found is displayed.

➛

or ❿buttons to start scanning the

13 Repeat this procedure from Step 6 onwards, until

all the required stations have been stored.

14 On completion, press the RETURN button three

times to exit the menu.

ENG-13

Clearing a Preset Station

PR CH NAME 1 21 2 3 4 5

- - - -

TV STATION TABLE

SWAPPING : OK DELETE : CLEAR RETURN

Auto Setup

Manual Setup

Install

TV System : G VCR Output CH : CH 36

Auto Setup

Manual Setup

Install

TV System : G VCR Output CH : CH 36

PR CH NAME 1 21 2 3 4 5

- - - -

TV STATION TABLE

SWAPPING : OK DELETE : CLEAR RETURN

PR CH NAME 1 2 3 21 4 5

- - - -

TV STATION TABLE

SWAPPING : OK DELETE : CLEAR RETURN

Changing the Preset Station Table

If you have stored a TV station:

☛

◆

That you do not require

◆

At the wrong programme position you can

cancel it.

1 After pressing the MENU, press the OK or

❿

Result: The Setup menu is displayed.

2 Press the corresponding ,

❷

buttons to select

the Install option.

3 Press the OK or

❿

to select this option.

Result: The Install menu is displayed.

4 Press the corresponding ,

❷

buttons, until the

Manual Setup option is selected.

5 Press the OK or

❿

to select a Manual Setup option.

Result: The TV STATION TABLE menu is

displayed.

You can rearrange the Station Table and give different programme numbers to the stations listed according to your own preferences.

1 After pressing the MENU, press the OK or

❿

Result: The Setup menu is displayed.

2 Press the corresponding ,

❷

buttons to select

the Install option.

3 Press the OK or

❿

buttons to select this option.

Result: The Install menu is displayed.

4 Press the corresponding ,

❷

buttons, until the

Manual Setup option is selected.

5 Press the OK or

❿

button to select this option.

Result: The TV STATION TABLE menu is

displayed.

6 Press the corresponding ,

❷

buttons, until the

required preset TV station (PR) is selected.

7 Press the CLEAR button. 8 Repeat the same procedure from Step 6 onwards

until all the required stations have been cleared.

9 On completion, press the RETURN button four

times to exit the menu.

6 Press the corresponding ,

❷

buttons, until the required preset TV programme is selected. Result: The selected station is displayed at the

same time on the television screen.

7 To change the programme number assigned to a

station press the OK button on the remote control. (For example, To move a TV station in programme 1 to programme 3)

ENG-14

+ 32 hidden pages