Samsung DVD-V530A User Manual
DVD-VCR
EJECT
OPEN/CLOSE
STANDBY/ON
OK
DVD-V530A
Instruction Manual
www.samsung.com.au
®
PAL
Contents
Contents
◆ FOREWORD
■ Safety Instructions ................................................................................................................... 5
■ Disc Type and Characteristics ................................................................................................. 6
GB GB
◆ DVD-VCR OVERVIEWS
■ Front View of the DVD-VCR .................................................................................................... 7
■ Rear View of the DVD-VCR ..................................................................................................... 7
■ Infrared Remote Control .......................................................................................................... 8
■ Display Indicators..................................................................................................................... 9
■ Accessories.............................................................................................................................. 9
◆ CONNECTING YOUR DVD-VCR
■ Deciding How to Connect DVD-VCR ....................................................................................... 10
■ Connecting DVD-VCR to the TV using the Coaxial Cable....................................................... 11
■ Connecting DVD-VCR to the TV using the RCA Cable ........................................................... 11
■ Connecting DVD-VCR to a Satellite Receiver or Other Equipment ......................................... 12
■ Plug & Auto Set Up .................................................................................................................. 13
■ Tuning Your Television for the DVD-VCR................................................................................ 14
■ Deck Control Keys ................................................................................................................... 15
■ Basic TV Tuner Operations...................................................................................................... 16
■ Inserting Batteries in the Remote Control ................................................................................ 17
■ Setting the Date and Time .......................................................................................................17
■ Setting the Menu Language..................................................................................................... 18
◆ SETTING UP YOUR DVD-VCR
■ Presetting the Stations Automatically ...................................................................................... 19
■ Presetting the Stations Manually ............................................................................................. 20
■ Clearing a Preset Station ......................................................................................................... 21
■ Changing the Preset Station Table .......................................................................................... 22
■ Setting the DVD-VCR Output Channel ................................................................................... 23
■ Selecting the Colour Mode.......................................................................................................23
■ Intelligent Picture Control......................................................................................................... 24
■ Intelligent Picture Control (Remote Control) ............................................................................ 24
■ Extend..........................................................................................................................25
■ Auto Power off ......................................................................................................................... 25
■ Screen Messages .................................................................................................................... 26
■ Selecting the Cassette Type .................................................................................................... 26
■ Repeat Play ............................................................................................................................. 27
■ S-VHS Play .............................................................................................................................. 27
◆ RECORDING TELEVISION BROADCASTS
■ Selecting the Recording Speed................................................................................................. 28
■ Protecting a Recorded Cassette ............................................................................................... 29
■ Recording a Programme Immediately....................................................................................... 29
■ Recording a Programme with Automatic Stop .......................................................................... 30
■ Using the Feature......................................................................................................... 31
■ Modifying Programming ................................................................................................32
■ Using the Timer Programming Feature..................................................................................... 33
■ Checking a Preset Recording ................................................................................................... 34
■ Cancelling a Preset Recording................................................................................................. 34
◆ PLAYING BACK
■ Playing a Cassette .................................................................................................................... 35
■ Adjusting Picture Alignment Manually....................................................................................... 35
■ Selecting the Audio Output Mode ............................................................................................. 36
■ Playing a Cassette in Slow Motion............................................................................................ 36
■ Playing a Sequence Frame by Frame....................................................................................... 37
■ Playing a Sequence at Variable Speeds................................................................................... 37
■ Searching for a Specific Sequence ........................................................................................... 38
■ Using the Tape Counter ............................................................................................................ 40
■ Connecting an RCA Audio/Video Input Cable........................................................................... 41
■ Using the Assemble Edit Function ............................................................................................ 42
■ Recording from Another VCR or Camcorder ............................................................................ 42
■ Using the TV Buttons on the Remote Control ........................................................................... 43
◆ DVD FUNCTIONS
■ Choosing a Connection............................................................................................................. 44
■
Setting Up the Language Features
■
Setting Up the Audio Options
■
Setting Up the Display Options
■
Setting Up the Parental Control
■
A/V Receiver Connections
■
Special Playback Features
■
Adjusting the Aspect Ratio (EZ View)
■
Using the Display Function
■
Changing the Camera Angle
■
Selecting the Subtitle Language
■
Repeat Play
■
Selecting the Audio Language
■
Using the Mark Function
■
MP3/WMA Play
■
Program Play & Random Play
■
Picture CD Playback
................................................................................................................................. 56
............................................................................................................................ 59
..................................................................................................................... 62
................................................................................................. 45
......................................................................................................... 47
...................................................................................................... 48
..................................................................................................... 49
............................................................................................................ 50
............................................................................................................ 51
............................................................................................. 52
............................................................................................................ 54
......................................................................................................... 55
..................................................................................................... 55
....................................................................................................... 57
............................................................................................................... 58
....................................................................................................... 61
2 3
Contents (cont.)
HH
5°C
40°C
10% 75%
Safety Instructions
◆ SOLVING PROBLEMS
The following illustrations represent precautions.
■ Technical Specifications ....................................................................................................... 64
GB GB
■ Problems and Solutions (VCR)............................................................................................. 65
■ Troubleshooting Guide (DVD) .............................................................................................. 66
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must by authorized by Macrovision Corporized by
Macrovision Corporation, and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
Do NOT expose the DVD-VCR
to extreme temperature conditions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight.
Do NOT expose the DVD-VCR
to any liquids.
Symbols
1 1
Press/push
= Step number
1
Hold down
☛
Important Note
➢
Do NOT place any objects on
the DVD-VCR or remote
control.
During a storm and/or light-
ning, unplug the DVD-VCR
from the mains socket and
aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
4 5
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
Disc Type and Characteristics
EJECT
Front View of the DVD-VCR
This DVD player is capable of playing the following types of discs with the corresponding logos :
Disc Types
GB GB
(Logos)
DVD
VIDEO-CD
AUDIO-CD
Recording
Types
Audio
+
Video
Audio
+
Video
Disc Size
12 Cm
8 Cm
12 Cm
8 Cm
12 Cm
Audio
8 Cm
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
* It may not be to play CD-R,CD-RW and DVD-R in all cases due to the type of disc or condition of the recording.
Max.
Playing
Time
Single-sided
240 min.
Double-sided
480 min.
Single-sided
80 min.
Double-sided
160 min.
74 min.
20 min.
74 min.
20 min.
Characteristics
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily selected
through the on-screen menu.
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
• An LP is recorded as an analog
signal with more distortion. CD
is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration
of audio quality over time.
STANDBY/ON
BUTTON
STOP
BUTTON
REW /SKIP BACK
BUTTON
PLAY/STILL
BUTTON
DVD DECK
RECORD
BUTTON
F.F / SKIP NEXT
BUTTON
OPEN/CLOSE
BUTTON
EZ VIEW
BUTTON
Rear View of the DVD-VCR
VIDEO CASSETTE
COMPARTMENT
LINE IN 1
DVD SELECT BUTTON
PROGRAMME
SELECTION BUTTON
RF ANTENNA INPUT
VCR SELECT BUTTON
EJECT BUTTON
LINE IN 2 VIDEO
INPUT JACK
COMPONENT VIDEO OUT
DIGITAL AUDIO OUT
SOCKET (COAXIAL)
LINE IN 2 AUDIO L, R
INPUT JACK
Disc Markings
~
• Playback
Region
Number
PAL
•
PAL colour system
in Australia,
Newzealand, etc.
NTSC
• NTSC broadcast
system in USA,
Canada, japan,
South Korea, etc.
• Dolby
Digital disc
STEREO
• Stereo
disc
Playback Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
DIGITAL
SOUND
• Digital
Audio disc
• DTS disc
RF OUT TO TV
LINE OUT TO TV (COMPOSITE)
LINE OUT COMPONENT VIDEO OUT
L Pr Y
AUDIO
R Pb
DIGITAL AUDIO OUT
SOCKET (OPTICAL)
AUDIO LINE OUT TO TV
(S-VIDEO OR COMPONENT)
DIGITAL AUDIO OUT
COAXIAL
OPTICAL
S-VIDEO OUT
S-VIDEO OUT JACK
6 7
O
P
E
N
/
C
L
O
S
E
S
T
A
N
D
B
Y
/
O
N
Infrared Remote Control
OPEN/CLOSE
STANDBY/ON
OK
Display Indicators
1 2 3 4 5
GB
1 STANDBY/ON
1
18
2
19
3
20
4
21
5
6
7
8
9
10
11
12
13
14
15
16
17
22
23
24
25
26
27
28
29
30
31
32
33
2 SHUTTLE << / >>
3 CLEAR
4 DVD
5 TV MUTE. AUDIO
6 VOLUME +/–
7 REWIND
SKIP BACK
8 STOP
9 SUBTITLE
10 MENU
11 UP
12 LEFT
13 DOWN
14 SPEED
15 RECORD
16 TIMER
17 ANGLE
IPC
18 OPEN/CLOSE
19 0-9
TV/VCR (Feature unavailable
20
on this model)
21 VCR, TV SELECT
22 INPUT SEL.
F.ADV/STEP
23 PROG
TRACKING
24 FAST-FORWARD
SKIP NEXT
25 PLAY/STILL
26 INFO.
27 RETURN
28 RIGHT
29 OK
30 EZ VIEW
31 DISC MENU
32 MARK
SEARCH
33 MODE
REPEAT
6 7 8
1 The DVD Deck is active
2 A DVD, CD, VCD, or SVCD is loaded
3 The time, counter position, time remaining or
current deck status is displayed
4 VHS tape is inserted
5 The VCR Deck is active
6 A DVD with a DTS soundtrack is loaded
7 The Hi-Fi track of a VHS tape is playing
(The current TV show or video is broadcast in
Stereo)
8 A Timer Recording is programmed or in progress.
Accessories
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
REMOTE CONTROL
& BATTERIES
AUDIO & VIDEO
CABLE
OWNER’S
INSTRUCTIONS
STEREO
COAXIAL CABLE
GB
8
9
LINE OUT
AUDIO
L
R
TV
LINE OUT
AUDIO
L
R
Deciding How to Connect DVD-VCR
LINE OUT
AUDIO
L
R
COAXIAL
OPTICAL
COMPONENT VIDEO OUT
Pr Y
Pb
OPT
You must take into account various factors when connecting audio or video systems:
◆ Types of connectors available on your systems
◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or
GB GB
Your DVD-VCR is equipped with the following connectors.
temporarily (camcorder for example)
Connector Location Type Direction Recommended Use
LINE 1
Rear Audio/Video RCA In/Out ◆ Television
◆ Other VCR
Audio output Rear Audio RCA Out ◆ Audio out (DVD only)
LINE 2
Front
LINE 2
Audio/Video Video in
In ◆ Audio in
Connecting DVD-VCR to the TV using the Coaxial Cable
To receive television programmes a signal must be received from
one of the following sources:
◆ An outdoor aerial
◆ An indoor aerial
◆ A cable television network
◆ A satellite receiver
☛ Make sure that both the television and the DVD-VCR
are switched off
1 Remove the aerial or network input cable from the television.
2 Connect this cable to the 75Ω coaxial socket marked on
the rear of your DVD-VCR.
3 Plug the coaxial cable supplied into the socket on your
DVD-VCR.
4 Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5 To obtain better quality pictures and sound on your television,
you can also connect your DVD-VCR to the television via the
RCA cable (see section below) if your television is equipped with
this type of connection.
before connecting the cables.
TV
4
2
3
Connecting DVD-VCR to the TV using the RCA Cable
COMPONENT Rear RCA Out ◆ COMPONENT out (DVD only)
output
Aerial
S-VIDEO Rear S-JACK Out ◆ S-Video out (DVD only)
output
Digital AUDIO Rear Optical Out ◆ Digital Audio out (DVD only)
output coaxial
OUT TO TV Rear 75 Ω Out ◆ Television
coaxial
You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available
on the television. You thus:
TV
RF coaxial cable
3
2
◆ Obtain better quality sound and pictures
IN FROM ANT. Rear 75 Ω In ◆ Aerial
coaxial ◆ Cable television network
◆ Satellite receiver
☛ Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements
are switched off
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
10 11
.
◆ Simplify the setting up procedure of your DVD-VCR
☛ ◆ Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
◆ Make sure that both the television and the DVD-VCR are switched off
before connecting the cables.
1 Connect the coaxial cable as indicated in the above section.
2 Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear of
the DVD-VCR.
3 Plug the other end into the appropriate connector on the television.
Connecting DVD-VCR to a Satellite Receiver or Other Equipment
LINE OUT CO
AUDIO
L
R
Auto setup
Please wait
00 %
Clock Set
12 : 00 1/JAN 2003
WED
Time Date Year
Plug & Auto Set up
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
GB GB
➢ The RCA input/output connectors on the rear of the DVD-VCR are used for equipment, such as
camcorders, VCRs or sound systems.
Camcorder
VCR
REAR OF THE DVD-VCR
Sound system
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1 Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2 Plug the DVD-VCR into the mains.
Result: The Language Set menu is displayed.
3 Select the required language by pressing the
4 Press OK to store the language selected.
Result
: A message appears.
or❷
buttons.
5 Press OK button.
6 Press OK to start the auto scanning.
◆ The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
➢ Auto preset can be performed by pressing
the VCR continuously for 5 seconds or more with no
tape inserted.
(STOP) on
■
TV
2
12 13
STANDBY/ON
Tuning Your Television for the DVD-VCR
Deck Control Keys
GB
STANDBY/ON
You must tune your television for the DVD-VCR only if you are
using a RCA cable
not
OPEN/CLOSE
2
➢ To view pictures from your DVD-VCR when a RCA
cable is used, the television must be set to the
audio/video mode (AV).
1 Switch on the television.
2 Switch on the DVD-VCR by pressing STANDBY/ON on the front
of the DVD-VCR or STANDBY/ON on the remote control.
3 Select a programme position on the television to be reserved for
use with your DVD-VCR.
4 Insert the video cassette in the DVD-VCR. Check that the
DVD-VCR starts reading the cassette; if not, press
5 Start a scan on your television or set the television to UHF
4
channel 38.
6 Fine tune the television until the pictures and sound are obtained
clearly.
7 If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the DVD-VCR output channel (see Setting the DVD-VCR
Output Channel on page 23 and Problems and Solutions on
page 67).
8 When the picture and sound are perfectly clear, store this
channel at the desired programme position on the television.
Result: That programme is now reserved for use with your
DVD-VCR.
.
❿
button
II
The DVD-VCR uses one set of controls to operate both decks.
The following keys are helpful in successfully controlling each
deck.
1 STANDBY/ON Button
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
2 DVD Button
Press the DVD button on the remote control when you want to
control the DVD deck.
◆ The DVD indicator will light on the Front Panel Display to
show that the DVD deck is selected.
3 VCR Button
Press the VCR button on remote control when you want to
control the VCR deck.
◆ The VCR indicator will light on the Front Panel Display to
show that VHS deck is selected.
4 INPUT SEL. BUTTON
Press the INPUT SEL. button repeatedly to cycle through all of
your input sources, including the Tuner (PR##), Line 1 (rear AV
input), and Line 2 (front AV input).
• Input select is only available when the VCR deck is selected.
➢ Before using the VCR operation of 19~45 pages, press
the VCR button on the remote control to select VCR
mode.
Before using the DVD operation of 46~65 pages, press
the DVD button on the remote control to select and
watch DVD.
GB
1
2
1
3
4
14
15
Time Date Year
Clock Set
12 : 00 1 / JAN / 2003 WED
Basic TV Tuner Operations
The following buttons are used when watching television via the
DVD-VCR’s built-in TV tuner.
GB GB
1 1
2
2
1 VCR, TV Button
Press to switch between your TV’s tuner and the VCR’s internal
tuner.
2 PROG Button
Press to change to the next or previous channel.
3 0-9 Buttons
Press to select channels directly.
4 INFO.
Press to display the channel you are watching.
◆ Also works in DVD and VCR mode.
Inserting Batteries in the Remote Control
You must insert or replace the batteries in the remote control
when you:
◆ Purchase the DVD-VCR
◆ Find that the remote control is no longer working
correctly
1 Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2 Insert two AAA, RO3 or equivalent batteries, taking care to
respect the polarities:
◆ + on the battery with + on the remote control
◆ – on the battery with – on the remote control
3 Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢ Do not mix different battery types (manganese and
alkaline for example).
1
Setting the Date and Time
Your DVD-VCR contains a 24-hour clock and calendar used to:
◆ Automatically stop programme recording
◆ Preset your DVD-VCR to record a programme
automatically
You must set the date and time when:
◆ You purchase the DVD-VCR
◆ Do not forget to reset the time when you change
☛
1 After pressing the MENU, press the OK or
2 Press the corresponding
3 Press the OK or
4 Press
5 Press the
clocks from winter to summer time and vice versa.
Result: The Setup menu is displayed.
option.
Result
: The Clock Set menu is displayed.
➛or❿
Result
Result
➢ You can hold the
to select the hour, minutes, day, month and year.
: The option selected highlight.
or❷
: The day of the week is displayed automatically.
quickly through the values.
,❷
❿
to select this option.
buttons to increase or decrease the value.
or❷
❿ .
buttons to select the Clock
buttons down to scroll more
6 On completion, press RETURN to exit the menu.
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
OK
3
4
16 17
Auto Setup
Your date will be lost
Press OK to continue
Menu to exit
Auto Setup
Manual Setup
VCR Output CH : CH 38
Install
Setting the Menu Language
Français
Deutsch
Español
Italiano
Nederlands
Language Set
English
OK
Auto Setup
Please Wait
15%
1 Open “MENU”
GB GB
1
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
2 Select “Language”
Use the or❷buttons to highlight
“Language,” then press the OK or
3 Set menu Language
Place the selection arrow next to your desired Language, then
press the OK button.
4 On completion, press RETURN to exit the menu.
After pressing the MENU, press the OK or
❿ .
❿ .
Presetting the Stations Automatically
You do not need to preset the stations if you have already
☛
set them automatically (see Plug & Auto Set Up on page 13).
Your DVD-VCR contains a built-in tuner used to receive
television broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆ Plug & Auto Set up (see page 13)
◆ Automatically
◆ Manually (see page 20)
You can store up to 80 stations.
1 After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2 Press the corresponding
option.
3 Press the OK or
Result
:The Install menu is displayed.
4 Press the corresponding
Setup is selected.
And then press the OK or
Result: A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
5 Press OK to start the auto scanning.
Result
: ◆ The Please Wait indication highlight on the
◆ The first frequency band is scanned and the first
◆ The DVD-VCR then searches for the second
◆ When the automatic scanning procedure has
➢ The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
6 If you wish to cancel the auto scanning before the end, press
the RETURN button to exit the menu.
,❷
❿
to select this option.
or❷
❿
to select this option.
television screen.
station found is displayed and stored.
station and so on.
finished, the DVD-VCR switches automatically to
programme 1.
❿ .
buttons to select the Install
buttons, until the Auto
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
VCR
➢ ◆ Once the auto scanning procedure has finished,
18 19
some stations may have been stored more than
once; select the stations with the best reception and
delete the ones no longer required (see page 21).
MANUAL TUNING
PR :
CH : - -
MFT : -
NAME : - - - -
MEMORY : OK
RETURN
TV STATION TABLE
PR CH NAME
1
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
PR CH NAME
1 01
2
3
4
5
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR RETURN
Auto Setup
Manual Setup
Install
VCR Output CH : CH 38
Auto Setup
Manual Setup
Install
VCR Output CH : CH 38
VCR
Presetting the Stations Manually
Clearing a Preset Station
VCR
20
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
GB
☛ You do not need to preset the stations manually if you
have already set them automatically.
1 After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2 Press the corresponding
option.
3 Press the OK or
Result
: The Install menu is displayed.
4 Press the corresponding
Setup option is selected.
5 Press the OK or
Result
: The TV STATION TABLE menu is displayed.
6 Press the
7 Press the
8 Press the
9 Press the
10 To change the programme’s name, press the
required.
Result
Result
The station name is set automatically from the broadcast signal.
Result
or ❷buttons to select a programme number as
❿
button to preset the station.
: The MANUAL TUNING menu is displayed.
➛or❿
: The frequency band is scanned and the first station
found is displayed.
or❷
: The first letter of the name flashes.
,❷
❿
to select this option.
❿
to select a Manual Setup option.
buttons to start scanning channel.
buttons until the NAME is selected.
❿ .
buttons to select the Install
or ❷buttons, until the Manual
❿
button.
11 To... Then...
Select a character Press the or❷button until the
in the name required character is displayed
Move to the next or Press the ➛or❿buttons
previous character respectively.
(letters, numbers or “-” character).
12 If you... Then...
Wish to store the ◆ Press the or❷buttons until the MFT
station displayed is selected.
Do not wish to ◆ Press the or ❷buttons until the CH
store the station is selected.
displayed
13 Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
14 On completion, press the RETURN button four times to exit the
menu.
◆ Press the
◆ Press OK to store the station
◆ Press the
◆ Go back to the beginning of Step 12
➛or❿
picture, if necessary.
scanning the frequency band and display
the next station
buttons to adjust the
➛or❿
buttons to go on
If you have stored a TV station:
◆ That you do not require
◆ At the wrong programme position
you can cancel it.
1 After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2 Press the corresponding
option.
3 Press the OK or
Result
:The Install menu is displayed.
4 Press the corresponding
Setup option is selected.
5 Press the OK or
Result
:The TV STATION TABLE menu is displayed.
6 Press the corresponding
preset TV station (PR) is selected.
,❷
❿
to select this option.
or ❷buttons, until the Manual
❿
to select a Manual Setup option.
or ❷buttons, until the required
❿ .
buttons to select the Install
7 Press the CLEAR button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9 On completion, press the RETURN button four times to exit the
menu.
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
GB
21
Loading...