Samsung SV-DVD1EA, DVD-V8000, DVD-V5000A User Manual
DVD-VCR
DVD-V5000
DVD-V8000
(SV-DVD1E)
Instruction Manual
www.samsung.com.au
Contents
Contents (cont.)
GB
◆ FOREWORD
■ Safety Instructions......................................................................................... 5
◆ DVD-VCR OVERVIEWS
■ Front View of the DVD-VCR.......................................................................... 6
■ Rear View of the DVD-VCR........................................................................... 6
■ Infrared Remote Control................................................................................ 7
■ Display Indicators.......................................................................................... 8
■ Accessories................................................................................................... 8
◆ C
ONNECTING YOUR DVD-VCR
■ Deciding How to Connect DVD-VCR............................................................. 9
■ Connecting DVD-VCR to the TV using the Coaxial Cable............................ 10
■ Connecting DVD-VCR to the TV using the RCA Cable................................. 10
■ Connecting Other Equipment to Your DVD-VCR.......................................... 11
■ Connecting the Audio Output Cable.............................................................. 12
■ Plug &Auto Set Up........................................................................................ 12
■ Tuning Your Television for the DVD-VCR..................................................... 13
■ Deck Control Keys......................................................................................... 14
■ Basic TV Tuner Operations........................................................................... 15
■ DVD out Setting............................................................................................. 15
■ Copying from DVD to VCR............................................................................ 16
◆ S
ETTING UP YOUR DVD-VCR
■ Inserting Batteries in the Remote Control...................................................... 17
■ Setting the Date and Time............................................................................. 17
■ Displaying/Hiding On-Screen Information..................................................... 18
■ Choosing Your Language.............................................................................. 18
■ Setting the DVD-VCR Output Channel.......................................................... 19
■ Selecting the RF OUT Sound Mode (B/G-D/K)(OPTION)............................. 19
■ Presetting the Stations Automatically............................................................ 20
■ Presetting the Stations Manually................................................................... 21
■ Clearing a Preset Station............................................................................... 22
■ Changing the Preset Station Table................................................................ 23
◆ R
ECORDING TELEVISION BROADCASTS
■ Selecting the Cassette Type.......................................................................... 24
■ Selecting the Recording Speed..................................................................... 24
■ NICAM(OPTION)........................................................................................... 25
■ Protecting a Recorded Cassette.................................................................... 26
■ Recording a Programme Immediately........................................................... 26
■ Recording a Programme with Automatic Stop............................................... 27
■ Using the Timer Programming Feature......................................................... 28
■ Checking a Preset Recording........................................................................ 29
■ Cancelling a Preset Recording...................................................................... 29
◆ PLAYING BACK
■ Playing a Cassette......................................................................................... 30
■ Adjusting Picture Alignment Automatically.................................................... 30
■ Adjusting Picture Alignment Manually........................................................... 30
■ Intelligent Picture Control.............................................................................. 31
■ Selecting the Colour Mode............................................................................ 32
■ Selecting the Audio Output Mode.................................................................. 33
■ Selecting the Audio Mute Mode..................................................................... 33
◆ S
EARCHING FORA SEQUENCE
■ Playing a Cassette in Slow Motion................................................................ 34
■ Playing a Sequence Frame by Frame........................................................... 35
■ Playing a Sequence at Variable Speeds....................................................... 35
■ Searching for a Specific Sequence............................................................... 36
■ Auto Repeat Play........................................................................................... 37
■ Interval Repeat Play...................................................................................... 37
■ Using the Tape Counter................................................................................ 38
◆ A
DVANCED RECORDING FEATURES
■ Connecting an RCA Audio/Video Input Cable............................................... 39
■ Using the Assemble Edit Function................................................................. 40
■ Recording from Another VCR or Camcorder................................................. 40
■ Audio Dubbing a Pre-recorded Cassette....................................................... 41
◆ O
THER FUNCTIONS AND USEFUL RECOMMENDATIONS
■ SQPB (Super VHS Quasi PlayBack)............................................................. 42
■ Auto Power Off.............................................................................................. 42
◆ DVD FUNCTIONS
■ Disc Type and Characteristics....................................................................... 43
■ Choosing a Connection................................................................................. 44
■ Playing a Disc................................................................................................45,46
■ Using the Search & Skip Functions............................................................... 47
■ Using the Display Function (DVD)................................................................. 48
■ Using the Display Function (CD/VCD)........................................................... 48
■ Repeat Play................................................................................................... 49
■ Program Play (DVD/VCD/CD)....................................................................... 50
■ Random Playback (DVD/VCD/CD)................................................................ 50
■ Using the Disc View Function (Track View VCD).......................................... 51
■ Using the Disc View Function (Index View VCD).......................................... 51
■ Selecting the Audio Language (Using the AUDIO button)............................. 52
■ Selecting the Subtitle Language (Using the SUBTITLE button).................... 52
■ Changing the Camera Angle......................................................................... 53
■ Screen Fit Play.............................................................................................. 53
■ Using the Mark Function (DVD/VCD)............................................................ 54
■ Recalling a Marked Scene............................................................................. 54
■ Clearing a Mark............................................................................................. 54
■ Using the Zoom (DVD/VCD).......................................................................... 55
■ 3D Sound Function........................................................................................ 55
■ Using the Setup Menu................................................................................... 56
■ Setting Up the Language Features................................................................ 57
■ Using the Disc Menu Language.................................................................... 57
GB
2
3
Contents (cont.)
Safety Instructions
GB
◆ DVD FUNCTIONS
■ Setting Up the AUDIO Language Features................................................... 58
■ Using the Subtitle Language......................................................................... 58
■ Setting Up the Parental Control..................................................................... 59
■ Setting Up the Audio Options........................................................................ 60
■ Setting Up the Display Options...................................................................... 61
◆ Technical Specifications....................................................................................... 62
◆ SOLVING PROBLEMS
■ Problems and Solutions (VCR)...................................................................... 63
■ Troubleshooting Guide (DVD)....................................................................... 64
The following illustrations represent precautions.
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
Do NOT expose the DVD-VCR
to extreme temperature conditions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight.
Do NOT expose the DVD-VCR
to any liquids.
GB
Symbols
Do NOT place any objects on
the DVD-VCR or remote
control.
1 1
= Step number
1
4
☛
➢
NoteImportantHold downPress/push
During a storm and/or lightning, unplug the DVD-VCR
from the mains socket and
aerial.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
5
Front View of the DVD-VCR
Infrared Remote Control
GB
STANDBY/ON
BUTTON
STEREO
HEADPHONE
JACK
DVD DECK
HEADPHONES
VOLUME
CONTROL
OPEN/CLOSE
BUTTON
DVD/VCR
SELECT BUTTON
COPY
BUTTON
Rear View of the DVD-VCR
VIDEO CASSETTE
COMPARTMENT
PROGRAMME
SELECTION
BUTTONS
F.F /
SKIP NEXT
BUTTON
PLAY/PAUSE
BUTTON
RECORD
BUTTON
STOP
BUTTON
EJECT
BUTTON
REW /
SKIP BACK
BUTTON
STANDBY/ON BUTTON
AUTO TRACKING, TRACKING +/-
VOLUME +/- BUTTONS
S-VHS BUTTON
MUTE BUTTON
3D SOUNDBUTTON
0-9 / AUDIO DUBBING BUTTON
REWIND/REVERSE PICTURE SEARCH BUTTON
ZOOM / RECORDING SPEED SELECTION BUTTON
SKIP BACK / RECORD BUTTON
RETURN / CLOCK/COUNTER BUTTON
DVD BUTTON
STOP BUTTON
ANGLE / TIMERBUTTON
SETUP BUTTON
JOYSTICK
TITLE BUTTON
MARK / SEARCH BUTTON
OPEN/CLOSE BUTTON
SHUTTLE << / >>
PROGRAM +/- BUTTONS
SCREEN FIT BUTTON
LAST CHANNEL BUTTON
TV/VCR BUTTON
VCR BUTTON
TV VIEW BUTTON
FAST-FORWARD/FORWARD SEARCH
BUTTON
PLAY/PAUSE BUTTON
SKIP NEXT / FRAME/STEP BUTTON
AUDIO MODE SELECTION BUTTON
SUBTITLE BUTTON
DISPLAY BUTTON
DVD MENU BUTTON
CLEAR BUTTON
AB REPEAT / REPEAT / MODE BUTTON
GB
AERIAL IN
CONNECTOR
OUT TO TV
CONNECTOR
6
AUDIO (L,R) INPUT/OUTPUT
SOCKETS
VIDEO INPUT/OUTPUT
SOCKETS
COMPONENT VIDEO
OUTPUT SOCKETS
AUDIO L, R OUTPUT
SOCKETS
S-VIDEO OUT
JACK
DIGITAL AUDIO OUT
SOCKET (OPTICAL)
DIGITAL AUDIO OUT
SOCKET (COAXIAL)
➢ Function Buttons:
◆ TV VIEW : Output selection key. Select the output that you want to see.
◆ DVD : Remote key active for DVD operation.
◆ VCR : Remote key active for VCR operation.
◆ JOYSTICK : Use for Up ( ), Down ( ), Left ( ), Right ( ), ENTER key.
◆ MENU : Use for DISC menu of DVD.
◆ SETUP : Use for SETUP menu of DVD or VCR.
If you press DVD button, the DVD is ligthining. It means DVD mode.
ex) If you press
If you press VCR button, the VCR is ligthining. It means VCR mode.
ex) If you press
ll (PLAY) key, the DVD will be play.
ll (PLAY) key, the VCR tape will be play.
7
Display Indicators
Deciding How to Connect DVD-VCR
GB
1 2 3 4 5 6 7 8 9 10 11
12 13 14 15 16 17 18
1 The DVD Deck is active
2 A DVD, CD, VCD or SVCD is loaded
3 A disc with LPCM (Linear Pulse Code
Modulation) audio is loaded
4 A DVD with a Dolby Digital is loaded
5 A DVD with a DTS soundtrack is loaded
6 The time, counter position, time remaining or
current deck status is displayed
7 The current TV show or video is broadcast in
Stereo
8 The Hi-Fi track of a VHS tape is playing
9 A Timer Recording is programmed or in progress.
If blinking there is an error. Also displays without the
clock hands to indicate that a recording is in progress
and blinks when the VCR is in Pause mode.
10 The VCR Record Speed is set to SP or LP
11 The VCR Deck is active
12 The status of the DVD deck is graphically displayed
13 3D Sound is active
14 The DVD has multiple angles to choose from
15 The number to the right of the “T” symbol is the
current title number
16 The number to the right of the “C” symbol is the
current title number
17 DVD to VHS copy is in progress
18 The status of the VCR deck is graphically displayed
You must take into account various factors when connecting audio or video systems:
◆ Types of connectors available on your systems
◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
Your DVD-VCR is equipped with the following connectors.
Connector Location Type Direction Recommended Use
LINE
Audio output Rear Audio RCA Out ◆ LINE Audio out
COMPONENT Rear RCA Out ◆ COMPONENT out (DVD only)
output
S-VIDEO Rear S-JACK Out ◆ S-Video out (DVD only)
output
Digital AUDIO Rear Optical Out ◆ Digital Audio out (DVD only)
output coaxial
Rear Audio/Video RCA In/Out ◆ Television
◆ Other VCR
GB
Accessories
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
REMOTE CONTROL
& BATTERIES
8
AUDIO & VIDEO
CABLE
OWNER’S
INSTRUCTIONS
COAXIAL CABLE
OUT TO TV Rear 75 Ω Out ◆ Television
coaxial
IN FROM ANT. Rear 75 Ω In ◆ Aerial
☛ Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements
are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
coaxial ◆ Cable television network
◆ Satellite receiver
9
Connecting DVD-VCR to the TV using the Coaxial Cable
Connecting Other Equipment to Your DVD-VCR
GB
To receive television programmes a signal must be received from
one of the following sources:
◆ An outdoor aerial
◆ An indoor aerial
◆ A cable television network
2
◆ A satellite receiver
☛ Make sure that both the television and the DVD-VCR are
switched
off before connecting the cables.
1 Remove the aerial or network input cable from the television.
2 Connect this cable to the 75Ω coaxial socket marked on the
rear of your DVD-VCR.
TV
4
3
3 Plug the coaxial cable supplied into the socket on your
DVD-VCR.
4 Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5 To obtain better quality pictures and sound on your television, you
can also connect your DVD-VCR to the television via the RCA
cable (see section below) if your television is equipped with this
type of connection.
Connecting DVD-VCR to the TV using the RCA Cable
Aerial
RF
coaxial
cable
T V
2
You can connect other audio and/or video equipment to your VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
➢ The RCA input/output connectors on the front of the VCR are used
for equipment, such as camcorders, VCRs or sound systems.
Camcorder
VCR
REAR OF THE VCR
Sound system
GB
You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available
on the television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your DVD-VCR
☛ ◆ Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
◆ Make sure that both the television and the DVD-VCR are switched
o f f before connecting the cables.
1 Connect the coaxial cable as indicated in the above section.
2 Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear
of the VCR.
3 Plug the other end into the appropriate connector on the television.
10
11
Connecting the Audio Output Cable
Tuning Your Television for the DVD-VCR
GB
1
2
2
Plug & Auto Set Up
TV
You can connect your DVD-VCR to a Hi-Fi system.
Example: You wish to take advantage of the quality of your Hi-Fi
☛ ◆ Regardless of the type of connection chosen, you
stereo system when watching a programme or recording
via your DVD-VCR.
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen
when the DVD-VCR is switched off.
◆ Make sure that both the television and the DVD-VCR
are switched
off before connecting the cables.
1 Connect the coaxial cable or RCA as indicated on page 11.
2 Plug the audio output cable into the audio connectors on the rear
of your DVD-VCR.
➢ Respect the colour coding of the left and right channels.
3 Plug the other end of the audio cable into the appropriate input
connectors on your Hi-Fi stereo system.
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1 Connect the coaxial cable as indicated on page 10.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2 Plug the DVD-VCR into the mains. It will automatically tune itself
in and store TV stations in the memory.
3 The process will finish after a few minutes. Then the DVD-VCR
automatically switches itself off.
You must tune your television for the DVD-VCR only if you are not
using a RCA cable
➢ To view pictures from your DVD-VCR when a RCA cable
is used, the television must be set to the audio/video
mode (AV).
1 Switch on the television.
2 Switch on the DVD-VCR by pressing STANDBY/ON on the front of
the DVD-VCR or STANDBY/ON on the remote control.
3 Select a programme position on the television to be reserved for
use with your DVD-VCR.
4 Insert the video cassette in the DVD-VCR. Check that the
DVD-VCR starts reading the cassette; if not, press
II
button
.
5 Start a scan on your television or set the television to UHF
channel 36 (Australia:UHF 38 CH).
6 Fine tune the television until the pictures and sound are obtained
clearly.
7 If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the DVD-VCR output channel (see Setting the DVD-VCR
Output Channel on page 19 and Problems and Solutions on page
63).
8 When the picture and sound are perfectly clear, store this channel
at the desired programme position on the television.
Result: That programme is now reserved for use with your
DVD-VCR.
GB
2
4
➢ Now, you only have to switch the DVD-VCR on and it is
ready for use.
☛ Function for “Plug & Auto Set Up” is fixed already.
So if you want to change this fixed one, you can change
it by Presetting the Stations Automatically in OSD “ Auto
Set Up” menu. (see page 20)
12
13
Deck Control Keys
Basic TV Tuner Operations
GB
GB
The DVD-VCR uses one set of controls to operate both decks. The
following keys are helpful in successfully controlling each deck.
1 STANDBY/ONButton
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
1
1
2 DVD Button
Press the DVD button on the remote control when you want to
control the DVD deck.
◆ The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
3 VCR Button
Press the VCR button on remote control when you want to control
2
3
the VCR deck.
◆ The VCR indicator will light on the Front Panel Display to show
that VHS deck is selected.
4 DVD-VCR Toggle
Press the SELECT button on the front panel to toggle control
between the DVD deck and the VCR deck.
5 The TV VIEW Key
Press the TV VIEW key repeatedly to cycle through all of your
input sources, including the DVD, VCR, Tuner (PR##), LINE.
➢ Before using the VCR operation of 13~42 pages, press
the VCR button on the remote control to select VCR
4
5
mode.
Before using the DVD operation of 43~61 pages, press
the TV VIEW button on the remote control to select and
watch DVD.
The following buttons are used when watching television via the
DVD-VCR’s built-in TV tuner.
1 TV/VCRButton
This button does not active this model.
It is only used for Europe Scart model.
2 PROG Up/Down Button
Press to change to the next or previous channel.
3 0-9 Buttons
Press to select channels directly.
4 Last Program
Press to jump directly to the previously viewed channel.
5 Volume/Mute
Press to adjust the volume of the program you are watching.
Press Mute to toggle the sound on and off.
◆ Also works in DVD and VCR mode.
6 Display
Press to display the channel you are watching.
◆ Also works in DVD and VCR mode.
DVD out Setting
If you connected your DVD-VCR to your television using the
S-Video or Component Video Out jacks, you MUST set the DVD
out selection in the on-screen menu system.
◆ You can ONLY watch the DVD player through the S-Video or
Component Video connection method. The tuner and VCR will
still be viewed through the RF or line outputs.
2
2
1
5
5
5
Other models
AUTO SET UP
MANUAL SET UP
TV SYSTEM : G
VCR OUTPUT CH : C H 3 6
DVD OUT : C O M P O N E N T
4
1 Press the SETUP button on the remote control.
2 Press the corresponding
I N S T A L L A T I O N option.
3 Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the corresponding or buttons, until the cursor is placed
in front of the
5 Press the button to select from the following options.
• C O M P O N E N T – Indicates that you are using the Component
Video Out jacks on the rear panel to connect to your TV.
• S-VIDEO– Indicates that you are using the S-Video Out jack on
the rear panel to connect to your TV.
DVD OUT option.
,
or , buttons to select the
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH:CH38
DVD OUT : C O M P O N E N T
E ND:S E T U P
Australia model
E ND:S E T U P
6 On completion, press SETUP twice to exit the menu.
14
15
GB
Copying from DVD to VCR
The DVD-VCR allows you to copy the contents of a DVD to a VHS
tape with a press of the COPY button.
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision® encoded DVDs.
1
1 Insert Disc
Insert the disc you wish to copy in the DVD deck and close the
drawer.
2 Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3 Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
◆ The DVD will go into Play mode and the VCR will go into Record
mode.
2
◆ If the DVD disc menu appears, you may need to press the PLAY
button manually to begin copying.
4 Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
◆ You must stop the Copy process manually when the DVD movie
ends or the DVD may replay and record over and over again.
☛ For NTSC DVD or VCD copy
3
4
4
◆ Before starting the copy process, set the Quasi PAL to
Off in Display options of DVD SETUP MENU.
(see page 61)
◆ If Quasi PAL is On, the copy process can not active.
◆ The copy is only active PAL tape system.
16
Inserting Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the DVD-VCR
◆ Find that the remote control is no longer working
correctly
1 Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2 Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
◆ + on the battery with + on the remote control
◆ – on the battery with – on the remote control
3 Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢ Do not mix different battery types (manganese and
alkaline for example).
Setting the Date and Time
Your DVD-VCR contains a 24-hour clock and calendar used to:
◆ Automatically stop programme recording
◆ Preset your DVD-VCR to record a programme
You must set the date and time when:
☛ ◆ Do not forget to reset the time when you change
automatically
◆ You purchase the DVD-VCR
◆ The power supply remains off for more than 6 hours
clocks from winter to summer time and vice versa.
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding
CLOCK SET option.
3 Press the ENTER button to select this option.
Result: The CLOCK SET menu is displayed.
4 Press or to select the hour, minutes, day, month and year.
Result: The option selected flashes.
5 Press the or buttons to increase or decrease the value.
Result: The day of the week is displayed automatically.
➢ You can hold the or buttons down to scroll more
quickly through the values.
,
or , buttons to select the
6 On completion, press SETUP twice to exit the menu.
1
CLOCK SET
E N T E R E ND:S E T U P
12:00 1/JAN/2001
E ND:S E T U P
GB
M O N
17
Displaying/Hiding On-Screen Information
Setting the DVD-VCR Output Channel
GB
Other models
O S D : O N
TAPE SELECT : E 1 8 0
COLOUR SYSTEM : A U T O
I P C : O N
N I C A M
: O N
E ND:S E T U P
Australia model
O S D : O N
TAPE SELECT : E 1 8 0
COLOUR SYSTEM : A U T O
I P C : O N
E ND:S E T U P
Choosing Your Language
LANGUAGE SET
E N T E R E ND:S E T U P
E N G L I S H E S P A Ñ O L
D E U T S C H D U T C H
F R A N Ç A I S
I T A L I A N O
M E M O R Y:E N T E R
E N D:S E T U P
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the Index, Programming MENU and
Timer functions, which cannot be hidden).
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding
USER SET option.
3 Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding or buttons, until the cursor is placed
in front of the
O S D option.
,
or , buttons to select the
5 To... Press or , until...
Display on-screen information O N is displayed.
Hide on-screen information O F F is displayed.
6 On completion, press SETUP twice to exit the menu.
You can change the language in which information is displayed on
the screen.
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding
LANGUAGE SET option.
3 Press the ENTER button to select this option.
Result: The LANGUAGE SET menu is displayed.
,
or , buttons to select the
4 Select the required language by pressing the or buttons.
5 Press ENTER to store the language selected.
6 Press SETUP to exit the menu.
Result: From now on, all the on-screen information will be
displayed in the language selected.
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding
I N S T A L L A T I O N option.
3 Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the or buttons, until the cursor is placed in front of the
VCR OUTPUT CH option.
5 Select the required output channel (CH21~CH69) by pressing the
or buttons (Australia:CH28 ~ CH69).
6 On completion, press SETUP twice to exit the menu.
Then tune your television again (see page 13).
,
or , buttons to select the
Selecting the RF OUT Sound Mode (OPTION)
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding
I N S T A L L A T I O N option.
3 Press the OK button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the corresponding or buttons, until the cursor is placed
in front of the TV SYSTEM option.
5
Press the button to select G or K.
,
or , buttons to select the
6 On completion, press SETUP twice to exit the menu.
➢ ◆ This option is not available Australia model.
Other models
AUTO SET UP
MANUAL SET UP
TV SYSTEM : G
VCR OUTPUT CH: C H 3 6
DVD OUT : C O M P O N E N T
E ND:S E T U P
Australia model
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH: C H 3 8
DVD OUT : C O M P O N E N T
E ND:S E T U P
I N S T A L L A T I O N
E N T E R E ND:S E T U P
AUTO SET UP
MANUAL SET UP
TV SYSTEM : G
VCR OUTPUT CH: C H 3 6
DVD OUT : C O M P O N E N T
E ND:S E T U P
GB
18
19
Loading...