Samsung DVD-P721M User Manual

VD PLA

YER

D VD-P721M

AK68-00049J

www.samsung.ca

2 3

Precautions Precautions

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.

This symbol indicates important instructions accompanying the product.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: DVD PLAYERS USE AN INVISIBLE LASER BEAM WHICH CAN

CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE PLAYER CORRECTLY AS INSTRUCTED.

CAUTIONS

Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche dans la borne correspondante

de la prise et pousser jusqu au fond. This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

FCC NOTE (for U.S.A):

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter ference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This class B digital apparatus meets all requirements of the Canadian Interference -Causing Equipment Regulations

WARNING

To reduce the risk of fire or shock hazard, do not expose this DVD player to rain or moisture.

CAUTION

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

Note:

• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.

• This DVD player is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this DVD player, the DVD player cannot play the disc.

• This device is protected by U.S. patent numbers 4,631,603, 4,577,216, 4,819,098 and 4,907,093 and other intellectual property rights. The use of Macrovision’s copy protection technology in the device must be authorized by Macrovision and is intended for home and other limited pay-per-view uses only, unless otherwise authorized in writing by Macrovision. Reverse engineering or disassembly is prohibited.

Handling Cautions

Disc Storage

Maintenance of Cabinet

• Before connecting other components to this player, be sure to turn them all off.

• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s internal parts may be damaged.

• Do not put a flower vase filled with water or any small metal objects on the player.

• Be careful not to put your hand into the disc tray.

• Do not place anything other than the disc in the disc tray.

• Exterior interference such as lightning and static electricity can affect normal operation of this player. If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The player will operate normally.

• Be sure to remove the disc and turn off the player after use.

• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long periods of time.

• Clean the disc by wiping in a straight line from the inside to the outside of the disc.

Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.

• Do not keep under direct sunlight.

• Keep in a cool ventilated area.

• Store vertically.

• Keep in a clean protection jacket.

For safety reasons, be sure to disconnect the AC power cord from the AC outlet.

• Do not use benzene, thinner, or other solvents for cleaning.

• Wipe the cabinet with a soft cloth.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

4 5

1. Read Instructions-All the safety and operating instructions should be read before the product is operated.

2. Retain Instructions-The safety and operating instructions should be retained for future reference.

3. Heed Warnings-All warnings on the product and in the operating instructions should be adhered to.

4. Follow Instructions-All operating and using instructions should be followed.

5. Cleaning-Unplug this product from the wall outlet before cleaning.Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6. Attachments-Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7. Water and Moisture-Do not use this product near water-for example near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8. Accessories-Do not place this product on an unstable cart, stand, tripod, bracket,

or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tr ipod, bracket, or table recommended by the manufacturer or sold with the product.Any mounting of the product should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer.

9. Cart Usage-A product and cart combination should be moved with care. Quick stops, excessive force, and

uneven surfaces may cause the product and cart combination to overturn.

10. Ventilation-Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of

the product and to protect it from overheating.These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11. Power Sources-This product should be operated only from the type of power source indicated on the

marking label. If you are not sure of the type of power supplied to your home, consult your product dealer or local power company.For products intended to operate from battery power, or other sources, refer to the operating instructions.

12. Grounding or Polarization-This product may be equipped with a polarized alternating-current line plug (a

plug having one blade wider than the other).This plug will fit into the power outlet only one way.This is a safety feature.If you are unable to insert the plug fully into the outlet, try reversing the plug.If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

13. Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

14. Lightning-For added protection for this product during a lightning storm or when it is left unattended and

unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

15. Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16. Overloading-Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry-Never push objects of any kind into this product through openings as they may touch dangerous voltage points or shor t-out par ts that could result in a fire or electr ic shock. Never spill liquid of any kind on the product.

18. Servicing-Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards.Refer all servicing to qualified service personnel.

19. Damage Requiring Service-Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a When the power-supply cord or plug is damaged. b If liquid has been spilled or objects have fallen into the product. c If the product has been exposed to rain or water. d If the product does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

e If the product has been dropped or damaged in any way. f When the product exhibits a distinct change in performance-this indicates a need for service.

20. Replacement Parts-When replacement parts are required, be sure the ser vice technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

21. Safety check-Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

22. Heat-The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Safety InstructionsSafety Instructions

Before You Start

Accessories

Install Batteries in the

Remote

If remote doesn’t operate

properly:

Remote Control

(AH59-00093V)

User’s Manual

(AK68-00049J)

Batteries for

Remote Controls (AA Size)

(4301-000117)

Video/Audio Cable

(AC39-42001R)

Open the battery cover on the back of the remote.

Insert two AA batteries. Make sure that the polarities (+ and -) are aligned correctly.

Replace the battery cover.

• Check the polarity + - of the batteries (Dry-Cell)

• Check if the batteries are drained.

• Check if remote sensor is blocked by obstacles.

• Check if there is any fluorescent lighting nearby.

TABLE OF CONTENTS

General Features ............................................................................................ 8

Disc Type and Characteristics .......................................................................... 9

Description-Front Panel ..................................................................................10

Description-Rear Panel ..................................................................................11

Tour of the Remote Control..............................................................................12

Choosing a Connection ..................................................................................14

Playing a Disc................................................................................................16

Using the Search & Skip Functions............................................................

Using the Display Function..............................................................................19

Repeat Play ..................................................................................................20

Program Play & Random Play ........................................................................21

S.FIT Play ......................................................................................................22

Selecting the Audio Language ........................................................................23

Selecting the Subtitle Language ......................................................................24

Changing the Camera Angle..........................................................................25

Using the Instant Replay Function....................................................................26

Using the Bookmark Function..........................................................................27

Using the Zoom & 3D Sound Functions............................................................28

MP3 Play ......................................................................................................29

Memory Stick ................................................................................................31

DAM (Digital Audio Manager) Playback ..............................................................35

Memory Stick Pull out ....................................................................................36

DPM (Digital Photo Manager) Playback ..........................................................................37

Slide Show ....................................................................................................38

Slide Show Order ..........................................................................................39

Photo View....................................................................................................40

Edit Photo......................................................................................................41

Using the Setup Menu ..................................................................................42

Setting Up the Language Features ..................................................................43

Setting Up the Parental Control ......................................................................45

Setting Up the Audio......................................................................................46

Setting Up the Display ..................................................................................47

Controlling a TV with the Remote ..................................................................48

Troubleshooting..............................................................................................49

Specifications ................................................................................................50

Warranty ......................................................................................................51

6 7

M. STICK

SETUP

CONNECTIONS

BASIC

FUNCTIONS

ADV

ANCED

FUNCTIONS

CHANGING

SETUP MENU

MEMOR

STICK

REFERENCE

Easy Remote Control

(AH59-01043A)

General Features

Disc Type and Characteristics

Excellent Sound Dolby Digital, a technology developed by Dolby Laboratories provides crystal clear sound reproduction.

Screen Both regular and widescreen(16:9) pictures can be viewed.

Slow Motion An important scene can be viewed in slow motion.

Programmed Play You can program tracks to play in desired order.

Parental Control The parental control allows users to set the level necessary to prohibit children from viewing harmful movies such as those with violence, adult subject matter, etc.

Various On-Screen Menu Functions You can select various languages(Audio/Subtitle) and screen angles while enjoying movies.

Memory Stick "Memory Stick" is a new compact, por table and versatile IC (Integrated Circuit) recording medium with a data capacity that exceeds a floppy disk.

Repeat You can repeat a song or movie simply by pressing the REPEAT button.

MP3 This unit can play discs created from MP3 files.

Instant Replay This function is used to replay the previous 10 seconds of the movie from the current position.

Progressive Scan Progressive scanning creates an improved picture with double the scan lines of a conventional interlaced picture.

Easy Remocon The Easy Remocon combines frequently used functions for easier operation.

COPY PROTECTION

Disc Markings

Play Region Number

• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD

discs.

• This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

This DVD player is capable of playing the following types of discs with the corresponding logos:

1/2"

Single-sided

240 min.

Double-sided

480 min.

Single-sided

80 min.

Double-sided

160 min.

Audio

Video

Audio

Video

Audio

• CD is recorded as a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time.

• Video with CD sound, VHS

quality & MPEG-1 compression technology.

• DVD contains excellent sound

and video due to Dolby Digital and MPEG-2 system.

• Various screen and audio

functions can be easily selected through the onscreen menu.

VIDEO-CD

AUDIO-CD

31/2"

74 min.

20 min.

31/2"

74 min.

20 min.

Disc Types

(Logos)

Recording

Types

Disc Size

Max.

Playing Time

Characteristics

DVD

DIGITAL

SOUND

STEREO

NTSC

• Play Region Number

• NTSC broadcast system in U.S.A, Canada, Korea, Japan, etc.

• Dolby Digital disc

• Stereo disc

• Digital Audio disc

• DTS disc

• MP3 discTM• MEMORY STICK

Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is described on the rear panel of the player.

8 9

SETUP

* Discs which cannot be played with this player:

• DVD-ROM • DVD-RAM

• CD-ROM • CDV

• CDI • SVCD, CVD

• HD layer of super Audio CD

• CDGs play audio only, not graphics.

* Ability to play back may depend on recording

conditions:

• DVD-R • CD-RW

• DVD+RW, -RW • Picture CD

NOTE

Description-Front Panel

Front Panel Controls

1. STANDBY / ON

•

When the unit is first plugged in, the indicator lights. When STANDBY/ON is pressed on again, the light goes out and the player is turned on.

2. HEADPHONES JACK

•

You can attach headphones here for private listening.

3. HEADPHONES VOLUME

•

Use to adjust headphones volume level.

4. DISC TRAY

•

Load the disc here.

5. DISPLAY

•

Operation indicators are displayed here.

6. MEMORY STICK

7. OPEN/CLOSE

•

Press to open and close the disc tray.

8. SCREEN FIT

9. PLAY/PAUSE

• Begin or pause disc play.

10. SKIP/SEARCH

11. STOP

• Stops disc play.

12. JOG/SHUTTLE

• Shuttle(outer dial) - Use during DVD and CD play to fast forward or reverse.

• Jog(inner dial) - Use for frame advance/CD track selection.

SETUP

10 11

123456

Description-Rear Panel

Rear Panel

1. DIGITAL AUDIO OUT JACKS

• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.

2. ANALOG AUDIO OUT JACKS

• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.

3. VIDEO OUT JACK

• Use a video cable to connect to the Video input jack on your television.

• The VIDEO OUT SELECT switch must be set to the 525I(480I) position.

4. S-VIDEO OUT JACK

•

Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality picture.

• The VIDEO OUT SELECT switch must be set to the 525I(480I) position.

5. COMPONENT VIDEO OUT JACKS

• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. Along with S-Video, Component Video provides the best picture quality.

• If 525P(480P) VIDEO is selected, progressive scan mode will work.

• If 525I(480I) VIDEO is selected, interlaced scan mode will work.

6. VIDEO OUT SELECT SWITCH

• Use the switch to set video out.

• If 525P(480P) VIDEO is selected, VIDEO and S-VIDEO will not work.

• Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system.

• If 525P(480P) VIDEO OUT is Selected, VIDEO and S-VIDEO will not work.

Important Note

1234 56789101112

Front Panel Display

1. Angle indicator. You can select multiple angles of a scene recorded by different cameras.

2. Disc type indicators

Reverse play / Pause / Forward play

4. Lights when 3D surround is turned on.

5. DVD : Title number

6. DVD : Chapter number.

7. Video/Audio CD : Track number

8. Repeat play mode

9. Linear PCM audio output

10. Dolby Digital Disc

11. DTS (Digital Theater System) output

12. MPEG-2 Audio output

13. MP3 indicators

14. Displays various messages concerning operations such as PLAY, STOP, LOAD, RANDOM, ... no DISC : No disc loaded. OPEN : The disc tray is open. LOAD : Player is loading disc information.

25 67 8 9 10

41413123

SCREEN FIT

MEMORY STICK

Tour of the Remote Control

M. STICK

12 13

Tour of the Remote Control

DVD Function Buttons

1. DVD POWER Button

2. NUMBER Buttons

3. STEP Button

4. VOLUME Buttons

5. TV/VIDEO Button

6. ZOOM Button

7. S.FIT Button (Screen Fit)

8. SEARCH Buttons

•

Allows you to search forward/backward through a disc.

9. STOP Button

10. RETURN Button

• Returns to a previous menu.

11. SETUP Button

• Brings up the DVD player’s Setup menu.

12. SUBTITLE Button

13. ANGLE Button

• Use to access various camera angles on a DVD.

14. MENU Button

• Brings up the Disc menu.

15. CLEAR Button

• Use to remove menus or status displays from the screen.

16. SLOW Button

17. TV POWER Button

18. 3D Button

19. OPEN/CLOSE Button

20. CHANNEL Buttons

21. M. STICK Button (Memory Stick)

22. PLAY/PAUSE Button

• Begin/Pause disc play.

23. SKIP Buttons

• Use to skip the title, chapter, or track.

24. BOOKMARK Button

25. DISPLAY Bu t t o n

• Displays the current disc mode.

26. AUDIO Button

•

Use this button to access various audio functions on a disc.

27. ENTER/DIRECTION Button (UP/DOWN or LEFT/RIGHT Button)

• This button functions as a toggle switch.

28. TOP MENU Button

•

Takes you to the menu on the DVD disc.

• When pressing the TOP MENU button with a

CD; the unit enters the INTRO mode. INTRO lets you listen to the beginning of each track for about 10 seconds.

29. REPEAT Button

• Allows you to repeat play a title, chapter, track,

or disc.

30. MODE Button

• Allows you to program a specific order.

31. REPEAT A-B But t on

•

Use to mark a segment to repeat between A and B.

32. I.REPLAY But t o n

•

This function is used to replay the previous 10 seconds of the movie from the current position.

SETUP

19 20

22 23 24

25 26

27 28

29 30

3 4

5 6

7 8

10 11

12 13

15 16

23 22

(Easy Remote Control)

Choosing a Connection Choosing a Connection

The following show examples of connections commonly used to connect the DVD player with a TV and other components.

Before Connecting the DVD Player

Connection to an Audio System

• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

• Refer to the owner’s manual of the additional components you are connecting for more information on those particular components.

Method 1

Method 2

Analog Audio Out Digital Audio Out

2ch Amplifier

Audio Input Jacks

Dolby Digital Decoder

Digital Audio Input Jack

AUDIO

DVD

14 15

CONNECTIONS

Connection to a TV (For Video)

TV (Normal, Widescreen, Projection, etc..)

Good picture

Basic Audio

Better picture

Best picture

Method 1

Method 2

Method 3

Optimum picture

Method 4

Audio Output Jacks

AV Cable

S-Video

Cable

Video Cables

Video Output Jack

S-Video Jack

Component Video Jacks

DVD

• Method 1 DVD Player + TV with Video Input Jack (The VIDEO OUT SELECT switch must be set to the 525I(480I) position.)

• Method 2 DVD Player + TV with S-Video Input Jack (The VIDEO OUT SELECT switch must be set to the 525I(480I) position.)

• Method 3 DVD Player + TV with Component Video Jacks (The VIDEO OUT SELECT switch must be set to the 525I(480I) position.)

• Method 4 DVD Player + TV with Progressive Scan Jacks. (The VIDEO OUT SELECT switch must be set to the 525P(480P) position).

•If 525P(480P) VIDEO OUT is Selected, VIDEO and S-VIDEO will not work.

•Depending on your TV, your hookup for Method 4 may differ from the illustration.

Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system.

Important Note

+ 18 hidden pages