Samsung DVD-HD746 User Manual

DVD Player

DVD-HD746

ENG

AK68-00517H

DVD-HD746-XSG(00517H)Cover 7/15/04 11:44 AM Page 1

ENG-3

Before you start

Install Batteries in the Remote

1. Open the battery cover on the back of the remote.

2. Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly.

3. Replace the battery cover.

If remote doesn’t operate properly

• Check the polarity + - of the batteries (Dry-Cell)

• Check if the batteries are drained.

• Check if remote sensor is blocked by obstacles.

• Check if there is any fluorescent lighting nearby.

Remote Control

Batteries for

Remote Control

(AAA Size)

User’s Manual

Video/Audio Cable

DVD POWER

PROG

STEP REPLAY

VOL

TV/VIDEO

VIDEO SEL. DVI SEL.

SUBTITLE AUDIO ANGLE REPEAT

EZ VIEWZOOM

SACD/CD

PRE. NEXT

PAGE

INDEX

PRE. NEXT

BOOKMARK

OPEN/CLOSE

INFO

D IS C

M E N U

ETURN

SKIP

CLEAR

TV POWER

INSTANT

Table of Contents

Accessories

Setup

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Before you start . . . . . . . . . . . . . . . . . . . . . . . .3

General Features . . . . . . . . . . . . . . . . . . . . . . .4

Disc Type and Characteristics . . . . . . . . . . . . .5

Description-Front Panel . . . . . . . . . . . . . . . . . .6

Description-Rear Panel . . . . . . . . . . . . . . . . . .7

Tour of the Remote Control . . . . . . . . . . . . . . .8

Connections

Choosing a Connection . . . . . . . . . . . . . . . . . .9

Basic Functions

Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . .13

Using the Search & Skip Functions . . . . . . . .14

Using the Display Function . . . . . . . . . . . . . . .14

Using the Disc and Title Menu . . . . . . . . . . . .15

Using the Function Menu . . . . . . . . . . . . . . . .16

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . .16

Slow Repeat Play . . . . . . . . . . . . . . . . . . . . .17

Program Play & Random Play . . . . . . . . . . . .17

Advanced Functions

Adjusting the Aspect Ratio (EZ View) . . . . . . .18

Selecting the Audio Language . . . . . . . . . . . .19

Selecting the Subtitle Language . . . . . . . . . . .19

Changing the Camera Angle . . . . . . . . . . . . .20

Using the Instant Replay/Skip Function . . . . .20

Using the Bookmark Function . . . . . . . . . . . .21

Using the Zoom Function . . . . . . . . . . . . . . . .22

SACD Playback . . . . . . . . . . . . . . . . . . . . . . .22

DVD AUDIO Playback . . . . . . . . . . . . . . . . . .24

Clips Menu for MP3/WMA/JPEG/MPEG4 . . . .25

Folder Selection . . . . . . . . . . . . . . . . . . . . . . .26

MP3/WMA Playback . . . . . . . . . . . . . . . . . . .26

MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . .27

Picture CD Playback . . . . . . . . . . . . . . . . . . .29

Changing Setup menu

Using the Setup Menu . . . . . . . . . . . . . . . . . .30

Setting Up the Language Features . . . . . . . . .30

Setting Up the Audio Options . . . . . . . . . . . . .32

Surround Sound Speaker Setup . . . . . . . . . . .33

Setting Up the Display Options . . . . . . . . . . . .34

Setting Up the Parental Control . . . . . . . . . . .36

Reference

Controlling a TV with the Remote . . . . . . . . . .38

Firmware upgrade . . . . . . . . . . . . . . . . . . . . .39

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . .40

Specifications . . . . . . . . . . . . . . . . . . . . . . . .42

DVI Cable

ENG-2

Precautions

1. Setting up

* Refer to the identification label located on the back

panel of your player for its proper operating voltage.

* Install your player in a cabinet with adequate

ventilation holes. (7~10cm) Do not block ventilation

holes on any of the components for circulation of air. * Do not push the disc tray by the hand. * Do not stack components. * Be sure to turn all components off before moving the

player. * Before connecting other components to this player, be

sure to turn them off. * Be sure to remove the disc and turn off the player

after use, especially if you don’t use it for a long time.

2. For your safety

* This product utilizes a laser. Use of controls or

adjustments or performance of procedures other than

those specified herein may result in hazardous

radiation exposure. * Do not open covers and do not repair yourself.

Refer servicing to qualified personal.

3. Caution

* Your player is not intended for industrial use but for

domestic purposes. Use of this product is for

personal use only. * Do not put any container filled with liquid or any small

metal objects on the player. * Exterior influences such as lightning and static

electricity can affect normal operation of this player.

If this occurs, turn the player off and on again with the

POWER button, or disconnect and then reconnect the

AC power cord to the AC power outlet. The player will

operate normally. * When condensation forms inside the player due to

sharp changes in temperature, the player may not

operate correctly. If this occurs, leave the player at

room temperature until the inside of the player

becomes dry and operational.

4. Disc

* Do not clean record-cleaning sprays, benzene,

thinner, or other volatile solvents that may cause

damage to the disc surface. * Do not touch the disc’s signal surface. Hold by the

edges or by one edge and the hole in the center. * Wipe the dirt away gently; never wipe a cloth back

and forth over the disc.

5. Environmental info

* The battery used in this product contains chemicals

that are harmful to the environment. * So, dispose of batteries in the proper manner,

according to federal, state, and local regulations.

CAUTION : USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DVD-HD746-XSG(00517H)gb 7/15/04 11:44 AM Page 2

EZ VIEW

LOADINGPLAY

STANDBY/ON

EZ VIEW

LOADINGPLAY

STANDBY/ON

EZ VIEW

LOADINGPLAY

STANDBY/ON

EZ VIEW

LOADINGPLAY

STANDBY/ON

ENG-5

Disc Type and Characteristics

Disc Markings

Play Region Number

DIGITAL

SOUND

STEREO

PAL

Play Region Number

PAL broadcast system in U.K, France, Germany, etc.

Dolby Digital disc

Stereo disc

Digital Audio disc

DTS disc

MP3 disc

SACD disc

DVD AUDIO disc

Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is described on the rear panel of the player.

This DVD player is capable of playing the following types of discs with the corresponding logos:

12 Cm

8 Cm

Single-sided 240 min.

Double-sided 480 min.

Single-sided 80 min.

Double-sided 160 min.

Audio

Video

• DVD contains excellent sound and video due to Dolby Digital and MPEG-2 system.

• Various screen and audio functions can be easily selected through the on-screen menu.

Disc Types (Logos)

Recording Types Disc Size Max. Playing Time Characteristics

DVD-VIDEO

12 Cm

8 Cm

74 min.

20 min.

Audio

Video

Audio

Video

• Video with CD sound, VHS quality & MPEG-1 compression technology.

VIDEO-CD

12 Cm

8 Cm

12 Cm

74 min.

20 min.

400 min.

74 min.

Audio

• CD is recorded as a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time.

• DVD AUDIO is a format specifically designed to provide the highest possible audio fidelity capable on DVD.

•

SACD is a high quality audio format with higher sampling rates and fuller, richer sound as compared to regular CD.

AUDIO-CD

DVD AUDIO

SACD

ENG-4

Excellent Sound

Dolby Digital, a technology developed by Dolby Laboratories, provides crystal clear sound reproduction.

Screen

Video with MPEG-2 compression technology. Both regular and widescreen(16:9) pictures can be viewed.

Slow Motion

An important scene can be viewed in slow motion.

Programmed Play (CD)

You can program tracks to play in desired order.

Parental Control (DVD)

The parental control allows users to set the level necessary to prohibit children from viewing harmful movies such as those with violence, adult subject matter, etc.

Various On-Screen Menu Functions

You can select various languages (Audio/Subtitle) and screen angles while enjoying movies.

EZ VIEW (DVD)

Easy View can convert Letter Box images to full screen viewing on your conventional TV.

Digital Photo Viewer (JPEG)

You can view Digital Photos on your TV.

Repeat

You can repeat a song or movie simply by pressing the REPEAT button.

MP3/WMA

This unit can play discs created from MP3/WMA files.

Instant Replay (DVD)

This function is used to replay the previous 10 seconds of a movie from the current position.

Instant Skip (DVD)

This function skips playback ahead 10 seconds.

SACD (Super Audio CD)

SACD is a high quality audio format with higher sampling rates and fuller, richer sound as compared to regular CD.

MPEG4

This unit can play MPEG4 formats within an avi file.

DVD AUDIO

DVD AUDIO is a format specifically designed to provide the highest possible audio fidelity capable on DVD.

DVI (Digital Visual Interface)

DVI reduces picture noise by allowing a pure digital video signal path from the player to your TV.

Note

* Discs which cannot be played with this player.

• DVD-ROM • DVD-RAM

• CD-ROM • CDV

• CDI • CVD

• CDGs play audio only, not graphics.

* Ability to play back may depend on recording

conditions.

• DVD-R, +R • CD-RW

• DVD+RW, -RW

* The unit may not play certain CD-R, CD-RW and

DVD-R due to the disc type or recording conditions.

COPY PROTECTION

Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.

This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

General Features

DivX Certification

DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc and are used under license.

DVD-HD746-XSG(00517H)gb 7/15/04 11:44 AM Page 4

ENG-7

Description-Rear Panel

Rear Panel

1. DIGITAL AUDIO OUT JACKS

• Use an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital, MPEG-2 or DTS decoder.

2. 5.1CH ANALOG AUDIO OUT JACKS

• Connect to an amplifier with 5.1ch analog input jacks.

3. AUDIO OUT JACKS

• Connect to the Audio input jacks of your television, audio/video receiver.

4. VIDEO OUT JACK

• Use a video cable to connect to the Video input jack on your television.

• The Video Output in Setup Menu must be set to Component (I-SCAN) or S-Video.

5. S-VIDEO OUT JACK

• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality picture.

• The Video Output in Setup Menu must be set to S-Video.

6. DVI OUT JACK

• Use the DVI cable to connect this jack to the DVI jack on your television for the best quality picture.

• The Video Output in Setup Menu must be set to Component (P-SCAN) & DVI.

7. COMPONENT OUT JACKS

• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video.

• If Component (P-SCAN)&DVI Video Output is selected in Setup Menu,interlaced scan mode and Video,S-Video will not work.

• If Component (I-SCAN)Video Output is selected in Setup Menu,progressive scan and DVI mode will not work.

Important Note

• Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system.

• If Component(P-SCAN) & DVI Video Output is selected in Setup Menu, Video and S-Video will not work.

• See page 35 to get more information on how to use the setup menu.

COAXIAL

R RAER L SUBWOOFER

R FRONT L CENTER

Pr Pb Y

S-VIDEO

DVI OUT

VIDEO

AUDIO

5.1CH ANALOG AUDIO OUT

OUT

COMPONENT OUT

OPTICAL

12 34

ENG-6

Description-Front Panel

STANDBY

234 58

Front Panel Controls

1. STANDBY/ON ( )

• When the unit is first plugged in, the red indicator lights. When STANDBY/ON button is pressed on, the blue light appears and the player is turned on.

2. DISC TRAY

• Place the disc here.

3. OPEN/CLOSE ( )

• Press to open and close the disc tray.

4. DISPLAY

• Operation indicators are displayed here.

5. STOP ( )

• Stops disc play.

6. SKIP ( ) / SEARCH

• Use to reverse skip a scene or music.

7. PLAY/PAUSE ( )

• Begin or pause disc play.

8. SKIP ( ) / SEARCH

• Use to forward skip a scene or music.

Front Panel Display

1. Disc type indicators

2. Play / Pause / Forward play

3. Displays various messages concerning operations such as PLAY, STOP, LOAD ...

no DISC : No disc loaded. OPEN : The disc tray is open. LOAD : Player is loading disc information.

Display Indicators

DVD-HD746-XSG(00517H)gb 7/15/04 11:44 AM Page 6

ENG-9

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV and other components.

Before Connecting the DVD Player

• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

• If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.

• Refer to the owner’s manual of the additional components you are connecting for more information on those

particular components.

Connection to an Audio System

Note

• DVD-AUDIO only plays back two channel audio through the Digital Audio out. Multi-channel DVD-Audio discs are output through the Analog outputs.

• SACD plays back only through the Analog outputs. (See page 32~33)

Method 1 Method 2

Audio Output Jaks

(2 Channel)

5.1CH Analog Audio Output Jacks (Multi Channel)

Digital Audio Output Jack

2ch Amplifier

Audio Input Jacks

5.1ch Analog Amplifier

Audio Input Jacks

AUDIO

SYSTEM

DVD

Player

Method 3

Dolby Digital Decoder

Digital Audio Input Jack

ENG-8

This remote control can also control most TVs. See page 38.

8. SEARCH Buttons ( / )

• Allow you to search forward/backward through a disc.

9. STOP Button ( )

10. MENU Button

• Brings up the DVD player’s menu.

11. RETURN Button

• Returns to a previous menu.

12. ZOOM Button

• Enlarges DVD picture.

13. AUDIO Button

•

Use this button to access various audio functions on a disc.

14. SUBTITLE Button

15. INDEX Buttons

• Use to skip the INDEX.

16. SACD/CD Button

• Selects SACD or CD playback mode.

17. SHUTTLE DIAL (Search mode)

• Performs fast motion play.

18. TV POWER button

• Turns the TV’s power on or off.

19. CLEAR Button

•

Use to remove menus or status displays from the screen.

20. INSTANT SKIP Button

• This function skips playback ahead 10 seconds.

21. INSTANT REPLAY Button

• This function is used to replay the previous 10 seconds of a movie from the current position.

22. CH / buttons

• Channel selection.

23. OPEN/CLOSE ( ) Button

• To open and close the disc tray.

24. DVI SEL. Button

• DVI Output resolution setup.

25. SKIP Buttons ( / )

• Use to skip the title, chapter, or track.

26. PLAY/PAUSE Button ( )

• Begin/Pause disc play.

27. INFO Button

• Displays the current disc mode.

28. DISC MENU Button

• Brings up the Disc menu.

29. ENTER/DIRECTION Button (UP/DOWN or LEFT/RIGHT Buttons)

• This button functions as a toggle switch.

30. EZ VIEW Button

• Easy View can convert Letter Box images to full

screen viewing on your conventional TV.

31. ANGLE Button

• Use to access various camera angles on a DVD.

32. REPEAT Button

• Allows you to repeat play a title, chapter, track, or disc.

33. PAGE Buttons

• Use to skip the PAGE.

34. BOOKMARK Button

35. JOG DIAL (Step mode)

• Operates frame by frame play. In CD mode, performs

track search.

DVD

Function Buttons

1. DVD POWER Button

• Turns the power on or off.

2. NUMBER Buttons

3. PROG Button

• Allows you to program a specific order.

4. STEP Button

• Advances play one frame at a time.

5. VOL +/- Buttons

• Control volumes.

6. TV/VIDEO Button

• Press to display all of the available video sources ( i.e., TV, Cable, Video)

7. VIDEO SEL. Button

• Selects Video output format.

Tour of the Remote Control

DVD POWER

PROG

STEP REPLAY

VOL

TV/VIDEO

VIDEO SEL. DVI SEL.

SUBTITLE AUDIO ANGLE REPEAT

EZ VIEWZOOM

SACD/CD

PRE. NEXT

PAGE

INDEX

PRE. NEXT

BOOKMARK

OPEN/CLOSE

INFO

DISC MENU

RETURN

SKIP

CLEAR

TV POWER

INSTANT

19 20

21 22

25 26

27 28

30 31

33 34

4 5

12 13 14

15 16

DVD-HD746-XSG(00517H)gb 7/15/04 11:44 AM Page 8

ENG-11

Connection to a TV (For Progressive scan, Digital Video)

Method 1

DVD Player + TV with Component Video Jacks. (The Video Output in Setup Menu must be set to Component (P-SCAN) & DVI.)

Method 2

DVD Player + TV with DVI Jack.

• Depending on your TV, your hookup for Method 2 may differ from the illustration. (The Video Output in Setup Menu must be set to Component (P-SCAN) & DVI.)

Important Note

• When the Video output is Progressive Scan, Video and S-Video will not work.

• If you want to convert Video Output to Progressive Scan, select Component (P-SCAN)& DVI in SETUP menu

and then select "Yes" within 10 seconds. Finally change the TV's external input to Component(576p/480p). (See Page 35)

• Use the VIDEO SEL. button to easily change the video output in no disc mode. (See page 10)

• Refer to your TV user's manual.

Audio Output Jacks

Choosing a Connection

DVD

Player

Method 1

Method 2

Progressive scan Basic Audio

Digital Video DVI Audio Input

Component Jacks

Digital Video Out

ENG-10

Choosing a Connection

Connection to a TV (For Video)

TV (Normal, Widescreen, Projection, etc..)

1. Connect a cable with the desired method.

2. Turn on your TV and DVD Player.

3. Set your TV the correct video input by pressing TV/VIDEO button on. (See page 38)

4. Select the video output according to the cable connection. If you use the VIDEO SEL. button, you can change easily video output in no disc mode.

Method 1

DVD Player + TV with Video Input Jack (The Video Output in Setup Menu must be set to S-Video or Component (I-SCAN).)

Method 2

DVD Player + TV with S-Video Input Jack (The Video Output in Setup Menu must be set to S-Video.)

Method 3

DVD Player + TV with Component Video Jacks (The Video Output in Setup Menu must be set to Component (I-SCAN).)

Note

• If you press the VIDEO SEL. button, Video output mode is changed in regular sequence in no disc mode.

(S-Video ➝ I-SCAN ➝ P-SCAN & DVI )

DVD

Player

Method 1 Method 2 Method 3

Basic Audio Video S-Video Interlace scan

Audio Output

Jacks

Cable

S-Video

Cable

Video

Cables

Video Output

Jack

S-Video Jack

Component Jacks

DVD-HD746-XSG(00517H)gb 7/15/04 11:44 AM Page 10

ENG-13

Playing a Disc

Before Play

• Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV remote control.

• If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.

After plugging in the player, the first time you press the DVD POWER button, this screen comes up : If you want to select a language, press a NUMBER button. (This screen will only appear when you plug in the player for the first time.) If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use.

Play

1. Press the OPEN/CLOSE button.

The STANDBY indicator light goes out and the tray opens.

2. Place a disc gently into the tray with the disc’s

label facing up.

3. Press the PLAY/PAUSE ( ) button or

OPEN/CLOSE button to close the disc tray.

4. Stopping Play

Press the STOP ( ) button during play.

5. Removing Disc

Press the OPEN/CLOSE button.

6. Pausing Play

Press the PLAY/PAUSE ( ) or STEP button on the remote during play.

- Screen stops, no sound.

- To resume, press the PLAY/PAUSE ( ) button once again.

7. Step Motion Play (Except CD/DVD-AUDIO/SACD)

Turn the Jog dial clockwise or press the STEP button on the remote during play.

- Each time the button is pressed or Jog Dial is turned,a

new frame will appear.

- No sound is heard during STEP mode.

- Press PLAY/PAUSE ( ) button to resume normal

play.

- You can only perform step motion play in the forward

direction.

8. Slow Motion Play (Except CD/DVD-AUDIO/SACD)

Press the FWD SEARCH ( ) button on the remote during PAUSE or STEP mode.

- By pressing the FWD SEARCH ( ) button, you can

select slow motion play for 1/8, 1/4 or 1/2 of normal speed.

- No sound is heard during slow mode.

- Press PLAY/PAUSE ( ) to resume normal play.

- Reverse slow motion play will not work.

RESUME function

When you stop disc play, the player remembers where you stopped, so when you press PLAY/PAUSE ( ) button again, it will pick up where you left off. (unless the disc is removed or the player is unplugged, or if you press the STOP ( ) button twice.)

Note

• If the player is left for about 5 minutes in pause

mode, it will stop.

• If the player is left in the stop mode for more than

about 30 minutes, the power will automatically shut off. (Automatic Power-Off Function)

• If the player is left in the stop mode for more than

one minute without any user interaction, a screen saver will be activated. Press the PLAY/PAUSE ( ) button to resume normal play.

• This icon indicates an invalid button press.

ENG-12

Choosing a Connection

DVI VIDEO Specifications

When you press the DVI SEL. button, in case of PAL TV system in setup menu 576p, 720p, 768p, 1080i ; [50Hz] are selected in order. When you press the DVI SEL. button, in case of NTSC TV system in setup menu 480p, 720p, 768p, 1080i ; [60Hz] are selected in order. The first press of the DVI SEL. button, brings up the current resolution. The second press allows you to change the DVI output resolution. * The specific resolution of DVI output may not work depending on your TV. * Refer to the TV users manual.

Important Note

• DVI (Digital Visual Interface) DVI is an interface to enable the digital transmission of video signals between various digital devices. Using DVI, the DVD player transmits a digital video signal and displays a vivid picture on a TV having a DVI jack.

• Description of the DVI connection DVI-D connector : digital signal only. DVI-I connector : digital and analog signal.

• Though the player uses a DVI-I cable, the player outputs only a pure digital signal to the TV.

• If TV does not support HDCP (High-bandwidth Digital content protection), snow noise or blue screen appears

on the screen.

• Be careful that various connectors are similar to DVI connector, for example VESA PnD, VESA DFD and so on.

• Why does Samsung use DVI?

Analog TVs require an analog video signal. However, when playing a DVD, the data transmitted to a TV is digital. Therefore either a digital-to-analog converter(in the dvd player) or an analog-to-digital converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. DVI technology is superior because it requires no D/A conversion and is a pure digital signal from the player to your TV.

• What is the HDCP? HDCP(High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via DVI from being copied. It provides a secure digital link between a video source(PC, DVD. etc) and a display device(TV, projector . etc). Content is encrypted at the source device to prevent unauthorized copies from being made.

PROGRESSIVE SCAN OUTPUT (525p/625p)

“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE, IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.”

DVD-HD746-XSG(00517H)gb 7/15/04 11:44 AM Page 12

+ 15 hidden pages