Samsung DVD-C350, DVD-C450K User Manual

DVD-PLAYER

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/global/register

DVD-C350

DVD-C450K

AK68-01907A ENGLISH

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISK OF ELECTRIC SHOCK�

DO NOT OPEN

RISK OF ELECTRIC SHOCK�

DO NOT OPEN

getting started

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long peroids of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Precautions

This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

Do not install this equipment in a confined space such as a bookcase or similar unit.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS

Note to CATV system installer : This reminder is provided to call CATV system installer’s attention to Article 820-40 of the

National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. Caution : FCC regulations state that any unauthorized changes or modifications to this equipment may void the user’s authority to operate it.

• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed

on the apparatus.

• If this power supply is used at 240V ac, a suitable plug adapter should be used.

FCC NOTE (for U.S.A):

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures.

TO RAIN OR MOISTURE.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations.

FDA Laser :

“ Complies with 21CFR 1040.10 except for deviations pursuant to Laser Notice No.50, Dated june 24, 2007.”

CALIFORNIA USA ONLY :

This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA “Perchlorate Material - special handling may apply , See www.dtsc.ca.gov/ hazardouswaste/perchlorate.

CAUTION

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

Note:

• This unit can be used only where the power supply is AC 120V,

60Hz. It cannot be used elsewhere.

• This DVD player is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this DVD player, the DVD player cannot play the disc.

• The product unit accompanying this user manual is licensed under certain intellectual property rights of

certain third parties. In particular, this product is licensed under the following US patents: 5,457,669 5,561,649 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524 6,377,531 6,385,587 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520 6,556,521 6,556,522 6,578,163 6,594,208 6,631,110 6,658,588 6,674,697 6,674,957 6,687,455 6,697,307 6,707,985 6,721,243 6,721,493 6,728,474 6,741,535 6,744,713 6,744,972 6,765,853 6,765,853 6,771,890 6,771,891 6 775,465 6,778,755 6,788,629 6,788,630 6,795,637 6,810,201 6,862,256 6,868,054 6,894,963 6,937,552.

This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/ IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

Handling Cautions

• Before connecting other components to this player, be sure to turn them all off.

• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s internal

parts may be damaged.

• Do not put a flower vase filled with water or any small metal objects on the player.

• Be careful not to put your hand into the disc tray.

• Do not place anything other than the disc in the disc tray.

• Exterior interference such as lightning and static electricity can affect normal operation of this player.

If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The player will operate normally.

• Be sure to remove the disc and turn off the player after use.

• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long periods of time.

• Clean the disc by wiping in a straight line from the inside to the outside of the disc.

• The Main plug is used as a disconnect device and shall stay readily operable at any time.

Disc Storage

Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.

• Do not keep under direct sunlight.

• Keep in a cool ventilated area.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

• Store vertically.

• Keep in a clean protection jacket.

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power cord from the AC outlet.

• Do not use benzene, thinner, or other solvents for cleaning.

• Wipe the cabinet with a soft cloth.

Contents

Getting Started

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

General Features . . . . . . . . . . . . . . . . . . . . . . 3

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Tour of the Remote Control ............... 4

Connections

Choosing a Connection ................. 5

Basic Functions

Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . 6

Using the Search and Skip Functions ...... 6

Using the Display Function . . . . . . . . . . . . . . 6

Using the Disc and Title Menu ............ 7

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Slow Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Advanced Functions

Adjusting the Aspect Ratio (EZ View) ....... 7

Selecting the Audio Language . . . . . . . . . . . . 7

Selecting the Subtitle Language ........... 8

Changing the Camera Angle .............. 8

Using the Bookmark Function . . . . . . . . . . . . 8

Using the Zoom Function . . . . . . . . . . . . . . . . 8

Clips Menu for MP3/WMA/JPEG/MPEG4/

CD Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Folder Selection . . . . . . . . . . . . . . . . . . . . . . . 8

MP3/WMA/CD Audio Playback. . . . . . . . . . . . 8

MPEG4 Playback (Only DVD-C450K) ....... 9

Playing Media file using the USB Host

Feature (Only DVD-C450K) ............... 9

CD Ripping (Only DVD-C450K) ........... 10

Picture CD Playback ................... 10

Karaoke Function

Karaoke Function (Only DVD-C450K) ...... 11

Navigating the Setup Menu

Using the Setup Menu . . . . . . . . . . . . . . . . . 11

Setting Up the Language Features ........ 11

Setting Up the Audio Options ............ 11

Setting Up the Display Options. . . . . . . . . . . 12

Setting Up the Parental Control . . . . . . . . . . 12

Setting Up the DivX .................... 12

Reference

Troubleshooting ....................... 13

Specifications . . . . . . . . . . . . . . . . . . . . . . . . 13

General Features

Excellent Sound

Dolby Digital, a technology developed by Dolby Laboratories, provides crystal clear sound reproduction.

Screen

Both regular and widescreen(16:9) pictures can be viewed.

Slow Motion

An important scene can be viewed in slow motion.

Parental Control (DVD)

The parental control allows users to set the level necessary to prohibit children from viewing harmful movies such as those with violence, adult subject matter, etc.

Various On-Screen Menu Functions

You can select various languages (Audio/Subtitle) and screen angles while enjoying movies.

Progressive Scan

Progressive scanning creates an improved pic-

ture with double the scan lines of a conventional interlaced picture.

EZ VIEW (DVD)

Easy View enables picture adjustment to match your TV's screen size (16:9 or 4:3).

Digital Photo Viewer (JPEG)

You can view Digital Photos on your TV.

Repeat

You can repeat a song or movie simply by pressing the REPEAT button.

MP3/WMA

This unit can play discs created from MP3/WMA files.

CD RIPPING (ONLY DVD-C450K)

This feature lets you to copy audio files from a disc into MP3 format on a USB device. (Audio CD only (CD DA)).

MPEG4 (ONLY DVD-C450K)

This unit can play MPEG4 formats within an avi file.

Note

- These disc formats cannot be played on this player.

• DVD-ROM • DVD-RAM

• CD-ROM • CDV

• CDI • CVD

• CDGs (Plays audio only, not graphics. The ability to play back may depend on recording con

ditions.)

• DVD-R, +R

• CD-RW

• DVD+RW, -RW (V mode)

- The unit may not play certain CD-R, CD- RW and DVD-R due to the disc type or recording condi tions.

COPY PROTECTION

Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs. This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

PROGRESSIVE SCAN OUTPUTS (480p)

“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAYCAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE, IF PROGRESSIVE SCAN PICTURE PROBLEMS OCCUR, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’(VIDEO) OUTPUT. IF THERE ARE QUESTIONS REGARDING YOUR TV SET COMPATIBILITYWITH THIS DVDPLAYER, PLEASE CONTACT SAMSUNG'S CUSTOMER SERVICE CENTER.”

Disc Markings

NTSC

STEREO

DIGITAL

SOUND

Play Region Number

NTSC broadcast system in U.S.A, Canada, Korea, Japan, etc.

Dolby Digital disc.

Stereo disc

Digital Audio disc

DTS disc

MP3 disc

Region Number

Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is described on the rear panel of the player.

DivX Certification (Only DVD-C450K)

DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc and are used under license. DivX Certified to play DivX video.

Descriptions

▼

▼▼

Front Panel Controls

DVD-C450K

DVD-C350

1. DISC TRAY

Place the disc here.

2. DISPLAY

Operation indicators are displayed here.

3. OPEN/CLOSE/STOP ( )

Press to open and close the disc tray

4. STOP (■

Stop disc play.

5. PLAY/PAUSE

Play or pause the disc / Stops Disc Play

6. POWER ON/OFF ( )

Rear Panel

) (

Only DVD-C450K)

( )

5 6

Turn On/Off the DVD Player

7. USB HOST (Only DVD-C450K)

Connect digital still camera, MP3 player, mem-

ory stick, Card reader, or another removable storage devices.

8. MIC (Only DVD-C450K)

Connect Microphone for karaoke functions.

9. MICROPHONE VOLUME (Only DVD-C450K)

Use to adjust microphone volume level. Use the

button by pressing it. Turn it to the left or right to control the volume.

1. AUDIO OUT JACKS

Use audio cables to connect to the Audio

input jacks of your television or audio/video

receiver

2. DIGITAL AUDIO JACK

Use a coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital,

MPEG2 or DTS decoder.

3. VIDEO OUT JACK

Use a video cable to connect to the Video

4. COMPONENT VIDEO OUT JACKS

- Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video.

- If P-SCAN is set to “ON” in Video Output of the Setup Menu, progressive scan mode will work.

- If I-SCAN is set to “ON” in Video Output of the Setup Menu, interlaced scan mode will work.

input jack on your television.

Tour of the Remote Control

DVD-C450K

1 2

3 4 5 6 7

1. DVD POWER Button

Turns the power on or off.

2. REPEAT Button

Allows you to repeat play

a title,

chapter, track, or disc.

3. DISC MENU Button

Brings up the Disc menu.

4. BOOKMARK

Quickly find bookmark sec-

tions of a DVD.

5. SEARCH Buttons ( / )

17 18

Allow you to search forward/

back ward through a disc.

6. STOP Button ( )

7. SKIP Buttons ( / )

Use to skip the title, chapter

or track

8. MENU Button

Brings up the DVD player’s

menu.

9. ENTER /π/†,√/® Buttons

This button functions as a

toggle switch.

10. AUDIO Button (√)

Use this button to access

various audio functions on a disc.

11. INFO Button

Displays the current disc mode.

12. OPEN/CLOSE ( ) Button

To open and close the disc tray.

13. REPEAT A-B Button

Allows you to repeat A-B disc.

14. USB Button

15. VIDEO SEL. Button

Selects video output for mats.

16. PLAY/PAUSE Button ( )

Begin/Pause disc play.

17. SUBTITLE Button (π)

18. RETURN Button

Returns to a previous menu.

19. TITLE MENU Button (®)

Brings up the Title menu.

20. KARAOKE Button († ) Use to begin Karaoke func

tions.

21. CANCEL Button

Use to remove menus or status displays from the screen.

DVD-C350

1 2

3 4

8 9

1. DVD POWER Button

Turns the power on or off.

2. REPEAT Button

Allows you to repeat play a

title, chapter, track, or disc.

3. DISC MENU Button

Brings up the Disc menu.

4. BOOKMARK

12 13

Quickly find bookmark sec

tions of a DVD.

15 16

5. STOP Button ( )

6. SKIP Buttons ( / )

Use to skip the title, chapter

or track

7. MENU Button

Brings up the DVD player’s

menu.

8. ENTER/π/†,√/® Buttons

This button functions as a

toggle switch.

9. AUDIO Button (√)

Use this button to access various audio functions on a disc.

10. INFO Button

Displays the current disc

mode.

11. OPEN/CLOSE ( ) Button

To open and close the disc

tray.

12. REPEAT A-B Button

Allows you to repeat A-B

disc.

13. ZOOM Button

Enlarges the DVD Picture.

14. VIDEO SEL. Button

Selects video output for

mats.

15. SEARCH Buttons ( / )

Allow you to search for

ward/back ward through a

disc.

16. PLAY/PAUSE Button ( )

Begin/Pause disc play.

17. SUBTITLE Button (π)

18. RETURN Button

Returns to a previous menu.

19. TITLE MENU Button (®)

Brings up the Title menu.

20. CANCEL Button

Use to remove menus or

status displays from the screen.

Install Batteries in the Remote control

1. Open the battery cover on the back of the remote control.

2. Insert two AAA batteries. Make sure that the polarities (+ and -) are

aligned correctly.

3. Replace the battery cover.

Connections

Choosing a Connection

The following explains how to make connections commonly used to connect the DVD player with a TV and other components. A diagram showing these connections is on the next page.

Before Connecting the DVD Player

- Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

- Refer to the user’s manual of the additional components you are connecting for more information on those particular components.

A. Connections to a TV Interlace / Progressive

- Connecting through the Component jacks lets you view video at the 480p (Progressive Scan) resolution.

- What is “Progressive Scan”? Progressive scan has twice as many scanning lines per frame as interlaced (480i) output and provides better and clearer picture quality.

1.Using Component video cables (not included), connect the COMPONENT VIDEO OUT (PR, PB and Y) jacks on the rear of the DVD player to the COMPONENT IN (PR, PB and Y) jacks of your TV.

2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.

3. Set the Video Output to I-SCAN/P-SCAN in the Display Setup menu. You can use the VIDEO SEL. button to change the Video Output mode.

4. Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

B. Connecting to a TV (VIDEO)

- Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of TV.

- Turn on the DVD player and TV.

- Press the input selector on your TV remote control until the Video signal from the DVD player appears on the TV screen.

Note

- Noise may be generated if the audio cable is placed too close to the power cable.

- If you want to connect to an Amplifier, please refer to the Amplifier connection section below.

- The number and position of terminals can vary depending on your TV set. Please refer to the user's manual of the TV.

- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player.

- If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video Output mode changes in the following sequence: (I-SCAN ➝ P-SCAN ).

C. Connection to an Audio System (2 Channel Amplifier, Dolby

Digital,MPEG2 or DTS Amplifier)

- Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. If using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier

- Using the video signal cable(s), connect the VIDEO or COMPONENT terminals on the rear of the DVD player to the VIDEO or COMPONENT terminals of your TV.

- Turn on the DVD player, TV, and Amplifier.

- Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

Note

- What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace output method has. Progressive scanning method can provide better and clearer picture quality.

RED

WHITE

RED

Audio Cable

RED

WHITE

RED

Video Cable

WHITE

YELLOW

Coaxial Cable

YELLOW

RED

BLUE GREEN

RED

BLUE

GREEN

Component Cable

2-Channel stereo ampilﬁer,

Dolby Digital or

DTS ampliﬁer

Basic functions

Playing a Disc

Before Play

- Using your TV’s remote control, turn on your TV and set it to the Video Input your DVD player is connected to.

- If you connected the DVD player to an external Audio System, turn on your Audio System and set it to the correct Audio Input.

After plugging in the player, the first time you press the DVD POWER button, the screen to the right appears: If you want to select a language, press the π/† button, and then press the ENTER button. (This screen will only appear when you plug in the player for the first time.) If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use.Once you select a menu language, you can change it by pressing ( ■ / ) the button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the SELECT MENU LANGUAGE window appears again where you can reset to your preferred language.

Using the Search and Skip Functions

During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection.

Searching through a Chapter or Track

During play, press the SEARCH ( or ) button on the remote control for more than 1 second.

- If you want to search at a faster speed on the DVD or CD, press the SEARCH button.

DVD 2X, 4X, 64X, 128X

CD 2X, 4X, 8X

Skipping Tracks

During play, press the SKIP ( or ) button.

- When playing a DVD, if you press the SKIP ( ) button, it moves to the next chapter. If you press the SKIP ( ) button, it moves to the beginning of the chapter. One more press makes it move to the beginning of the previous chapter.

- When playing a CD, if you press the SKIP ( ) button, it moves to the next track. If you press the SKIP ( ) button, it moves to the beginning of the track.

Using the Display Function

When Playing a DVD/MPEG4

1. During play, press the INFO button on the remote control.

2. Press the π/† buttons to select the desired item

3. Press the √/® buttons to make the desired setup and then press the ENTER button.

4. To make the sceen dissapear, press the INFO button again.

Note

- The speed marked in this function may be different from the actual playback speed.

- No sound is heard during search mode (Except CD).

The functions when using the Display function are listed in the table below.

To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified.

Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to tracks on an audio CD).

Allows playback of the film from a desired time. You must enter the starting time as a reference.The time search function does not operate on some disc.

Refers to the subtitle languages available in the disc. You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen. A DVD disc can have up to 32 different subtitles.

ENTER and press the function and Zoom. Refers to the language of the film soundtrack. In the example, the soundtrack is played in English 5.1CH. A DVD disc can have up to eight different soundtracks. Some DVD discs are have more angle function from any picture. Bookmark function make you easily and quickly to find a track or chapter from DVD or CD. The EZ View function is use for changing the aspect ratio in DVD. The ZOOM function is use for Enlarge DVD Picture.

√/® buttons

to access the desired Audio, Angle, Bookmark, EZ View

Using the Disc and Title Menu

During stop mode of a DVD disc, press the DISC MENU/TITLE MENU button on the remote control.

Note

- The Disc Menu or Title Menu may not work. Depending on the disc.

- You can also use the Disc Menu, using the DISC MENU button on the remote control.

- Title Menu will only be displayed if there are at least two titles in the disc.

Repeat Play

Repeat the current Chapter, title, disc, a chosen section (A-B), or all of the disc.

When playing a DVD

1. Press the REPEAT buttons to select Chapter, Title, Disc or Repeat Off.

- Chapter : repeats the chapter that is playing.

- Title : repeats the title that is playing.

- Disc : repeats the disc that is playing.

- Off

Using the A-B Repeat function

1. Press the REPEAT A-B button at the point where you want repeat play to start (A).

2. Press the REPEAT A-B button at the point where you want the repeat play to stop (B).

- To return to normal play, press the CANCEL button.

3. To return to normal play, press the REPEAT A-B then press the ENTER button until the display shows Repeat : Off.

Note

- A-B REPEAT allow you to set point (B) directly after point (A) has been set.

- Depending on the disc, the Repeat function may not work.

Slow Play

This feature allows you to repeat scenes containing sports, dancing, musical instruments being played etc. in slow motion, so you can study them more closely.

When playing a DVD

1. During play, press the PLAY/PAUSE ( ) button.

2. Press the SEARCH ( ) button to choose the play speed between 1/2, 1/4, 1/8 and 1/16 of

normal speed.

Advanced functions

Adjusting the Aspect Ratio (EZ View)

The Aspect ratio is the relation between the width and height of a picture. The two most common are 4:3 (Standard) and 16:9 (Widescreen). Follow the instructions below for the best aspect ratio setting for your TV

Changing the aspect ratio (DVD)

1. During play, press the INFO button on the remote control.

2. Press the π/† buttons to select Shortcut, then press the ENTER button.

3. Press the √/® buttons to select EZ View, then press the ENTER button.

- Each time you press the √/® button, the screen size changes. For graphics of the screen sizes and the sequence in which the sizes change, see the next column.

If you are using a 16:9 TV For 16:9 aspect ratio discs

- WIDE SCREEN

- SCREEN FIT

- ZOOM FIT

For 4:3 aspect ratio discs

-Normal Wide

-SCREEN FIT

-ZOOM FIT

-VERTICAL FIT

Note

This function may behave differently depending on the type of disc.

Selecting the Audio Language

You can select a desired audio language quickly and easily with the AUDIO button.

Using the AUDIO/ √ button (DVD/MPEG4)

1. Press the AUDIO /√ button. The Audio changes when the button is pressed repeatedly. The

audio languages are represented by abbreviations. Press the Audio / √ button on the remocon repeatedly to select the desired MPEG4 Audio language, then press ENTER.

Note

- This function depends on audio languages are encoded on the disc and may not work,

- A DVD disc can contain up to 8 audio languages.

If you are using a 4:3 TV For 16:9 aspect ratio discs

- 4:3 Letter Box

- 4:3 Pan Scan

- SCREEN FIT

- ZOOM FIT

For 4:3 aspect ratio discs

- Normal Screen

- SCREEN FIT

- ZOOM FIT

Selecting the Subtitle Language

001/004

O

You can select a desired subtitle quickly and easily with the SUBTITLE (π) button.

Using the SUBTITLE / π button (DVD/MPEG4)

1. Press the SUBTITLE /π button. The subtitle languages are represented by abbreviations. The

subtitle changes when the button is pressed repeatedly.

2. To remove the SUBTITLE icon, press the SUBTITLE / π button.

Note

- Depending on the DVD, you may have to select the desired subtitle in the DVD’s Disc Menu. Press the INFO button.

- This function depends on what subtitles are encoded on the disc and may not work on all DVDs.

- A DVD disc can contain up to 32 subtitle languages.

Changing the Camera Angle

When a DVD contains multiple angles of a particular scene, you can use the ANGLE function.

Using the ANGLE button (DVD)

If the disc contains multiple angles, the ANGLE appears on the screen.

1. During play, press the INFO button on the remote control.

2. Press the π/† buttons to select Shortcut, then press the ENTER button.

3. Press the √/® buttons to select Angle, then press the ENTER button.

4. Press the √/® buttons on the remote control to select the desired angle.

Note

- If the disc has only one angle, this feature won’t work. Currently, very few discs have this feature.

- Depending on the disc, these functions may not work.

Using the Bookmark Function

This feature lets you bookmark sections of a DVD so you can quickly ﬁnd them at a later time.

Using the Bookmark Function

1. During play, press the INFO button on the remote control.

2. Press the π/† buttons to select Shortcut, then press the ENTER button.

3. Press the √/® buttons to select Bookmark, then press the ENTER button.

4. When you reach the scene you want to mark, press-the ENTER button. You can bookmark up to

12 scenes at a time.

Note

- Depending on a disc, the Bookmark function may not work.

Recalling a Marked Scene

1~3. The first 1~3 steps are the same as those for “Using the Bookmark Function”.

4. Press the √/® buttons to select a marked scene.

5. Press the PLAY/PAUSE ( ) button to skip to the marked scene.

Clearing a Bookmark

1~3. The first 1~3 steps are the same as those for “Using the Bookmark Function”.

4. Press the √/® buttons to select the bookmark number you want to delete.

5. Press the CANCEL button to delete a bookmark number.

Using the Zoom Function

- Using the Zoom Function (DVD-C350)

1. During play, press the ZOOM button on the remote control.

- Using the Zoom Function (DVD-C450K)

1. During play, press the INFO button on the remote control.

2. Press the π/† buttons to select Shortcut, then press the ENTER button

3. Press the √/® buttons to select Zoom, then press the ENTER button.

- During DVD play, press ENTER to zoom in 2X/3X/4X/ Normal in order.

Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio

CD Audio or discs with MP3/WMA/JPEG contain individual songs and/or pictures These discs are organized into folders on this unit as shown to the right. The folder function much like the folders you use on your computer. To go access these folders and the files in them, follow these steps :

1. Open the disc tray. Place the disc on the tray.

2. Close the tray and the tray closes. The tray closes and the Parent Folder Menu screen appears (top screen image.) Parent folders contain all the Peer folders that have the same kind of content : music, video, photos, etc.

3. Press the π/† buttons to select the Parent folder of your choice, and then press the ENTER. A screen displaying the Peer folders appears. The Peer folders contain all the folders with the same kind of content (video, music, photos, etc.) that are in the Parent folder

Folder Selections

- To select the Parent Folder Press the RETURN button to go to parent folder, or press the π/† buttons to select “..” and

press ENTER to go to the parent folder.

- To select the Peer Folder Press the π/† buttons to select the desired folder, and then press ENTER.

- To select the Sub-Folder Press the π/† buttons to select the desired folder, and then press ENTER.

MP3/WMA/CD Audio Playback

1. Open the disc tray. Place the disc on the tray. Close the tray.

- Only one kind of file is played back when a disc or a folder contains both MP3 and WMA files.

2. Press the π/† buttons to select a Music folder, and then press ENTER. Press the π/† to select a song file, and then press ENTER.

Repeat/Random playback

1. Press the REPEAT button to change the playback mode. There are four modes, such as Off,

Track, Folder and Random.

- Off: Normal Playback

- Track: Repeats the current song file.

- Folder: Repeats the song files which have the same extension in the current folder.

- Random: Song files which have the same extension will be played in random order.

2. To resume normal play, press the CANCEL button.

CD-R MP3/WMA file When you record MP3 or WMA files on CD-R, please refer to the following.

- Your MP3 or WMA files should be ISO 9660 or JOLIET format.

ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and

Windows, and with Apple's Mac.This format is the most widely used.

- When naming your MP3 or WMA files, do not exceed 8 characters, and enter “.mp3, .wma” as the file extension.

General name format : Title.mp3. or Title.wma. When composing your title, make sure that you

use 8 characters or less, have no spaces in the name, and avoid the use of special characters

including: (.,/,\,=,+).

- Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.

Sound quality with MP3 files basically depends on the rate of compression/ decompression you

choose. Getting CD audio sound requires an analog/digital sampling rate, that is conversion to MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like Kbps or more, only rarely give better sound quality. Conversely, files with decompression rates below 128 Kbps will not be played properly.

- Use a decompression transfer rate of at least 64Kbps when recording WMA files.

Sound quality with WMA files basically depends on the rate of compression/decompression you

choose. Getting CD audio sound requires an analog/digital sampling rate, that is conversion to WMA format, of at least 64Kbps and up to Kbps. Conversely, files with decompression rates below 64Kbps or over Kbps will not be played properly.

- Do not try recording copyright protected MP3 files.

Certain "secured" files are encrypted and code protected to prevent illegal copying. These files

are of the following types: Windows Media (registered trade mark of Microsoft Inc) and SDMITM (registered trade mark of The SDMI Foundation). You cannot copy such files.

- Important:

The above recommendations cannot be taken as a guarantee that the DVD player will play MP3

recordings, or as an assurance of sound quality. You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent optimal playback of these files on your DVD player (degraded sound quality and in some cases, inability of the player to read the files).

- This unit can play a maximum of 500 files and 500 folders per disc.

MPEG4 Playback

MPEG4 Play Function (ONLY DVD-C450K)

AVI files are used to contain the audio and video data. Only AVI format files with the “.avi” extensions can be played.

1. Open the disc tray. Place the disc on the tray. Close the tray.

2. Press the π/† buttons to select an avi file (DivX/XviD) and then press ENTER button.

Repeat playback

Press the REPEAT button to change playback mode. There are 3 modes, such as Track, Folder and Off.

- Track : repeats the track that is playing.

- Folder : repeats the AVI files which have the same extension in the current folder.

- Off

MPEG4 Function Description

Function

Skip

( or )

Slow Motion

Play

- These functions may not work depending on MPEG4 file.

CD-R AVI file

This unit can play the following video compression formats within the AVI file format:

- DivX 3.11 contents

- DivX 4 contents (Based on MPEG-4 Simple Profile)

- DivX 5 contents (MPEG-4 simple profile plus additional features such as bi-directional frames. Qpel and GMC are also supported.)

- XviD MPEG-4 compliant Contents.

This unit supports all resolutions up to maximum below.

720 x 480 @30fps 720 x 576 @25fps : Maximum bit rate :4Mbps

Note

• Some MPEG-4 files created on a personal computer may not be play back. That is why Codec

Type, Version and Higher resolution over specification is not supported.

• This unit supports CD-R/RW written in MPEG4 in accordance with the “ISO9660 format”.

During play, press the or button, it moves forward or backward 5 minutes.

During play, press the SEARCH ( or ) button and press again to search at a faster speed. Allows you to search at a faster speed in an AVI file. (2X, 4X, 8X)

Allows you to search at a slower speed in an AVI file. (1/2, 1/4, 1/8, 1/16)

DivX5

Playing Media File Using the USB Host feature

(Only DVD-C450K)

You can enjoy the media files such as pictures, movies and tunes saved in an MP3 player, USB memory or digital camera in high audio by connecting the storage device to the USB port of the DVD Player.

Using the USB HOST feature

1. Connect the USB device to the USB port on the front of the unit.

2. Press the π/† buttons to select a file in USB. Press ENTER to Open file.

Note

• Each time the USB button on the remote control is pressed, a frame of the USB device

selection will appear.

• “ USB” appears on the display screen.

• When playing DVD or CD and USB inserted, “Press USB to select device” appear at the top

left corner for a moment.

• USB MENU screen appears on the TV screen and the saved file is played.

Description

Skip Forward/Back During playback, press the ( / ) button.

• When there is more than one file, when you press the button, the next file is selected.

• When there is more than one file, when you press the button, the previous file is selected.

Safe USB Removal

To prevent damage to the memory stored in the USB device, perform safe removal before disconnecting the USB cable.

- Press the STOP ( ) button

- Remove the USB cable.

Fast playback To play back the disc at a faster speed, press ( / ) during playback.

• Each time you press either button, the playback speed will change as follows: 2x ➞ 4x ➞ 8x.

Compatible Devices

1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disk in Windows (2000 or later) without additional driver installation.)

2. MP3 Player: Flash type MP3 player.

3. Digital camera: Cameras that support USB Mass Storage v1.0.

• Cameras that operate as a removable disk in Windows (2000 or later) without additional

driver installation.

4. USB Flash Drive: Devices that support USB2.0 or USB1.1.

• You may experience a difference in playback quality when you connect a USB1.1 device.

5. USB card Reader: One slot USB card reader and Multi slot USB card reader

• Depending on the manufacturer. the USB card reader may not be supported.

• If you install multiple memory devices into a multi card reader, you may experience problems.

6. If you use a USB extension cable, the USB device might not be recognized.

• CBI (Control/Bulk/Interrupt) is not supported.

• Digital Cameras that use PTP protocol or require additional program installation when connected

to a PC are not supported.

• A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32)

file system is supported.)

• Some USB and MP3 players, when connected to this product, may not operate depending on

the sector size of their file system.

• Some USB and MP3 can not support.

• The USB HOST function is not supported if a product that transfers media files by its

manufacturer-specific program is connected.

• Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.

• The USB host function of this product does not support all USB devices.

CD Ripping (Only DVD-C450K)

This feature lets you to copy audio files from disc to USB device into MP3 format.

1. Open the dics tray. Place the Audio CD(CD DA) disc on the tray, and close the tray.

Connect the USB device to the USB port on the front of the unit.This screen will be displayed. Press ENTER to select disc.

2. Press the RETURN button to display the ripping screen.

3. Press the π/† buttons, then press the ENTER button to select files for ripping.

- To deselect files, press ENTER button again.

4. Press the ® and † button to select START, then press the ENTER button begin ripping.

- Ripping menu contain 4 button :

- Bit Rate, press ENTER to change 128kbps ➔ 192kbps ➔ 128bkps. Standart : 128kbps. Better Quality : 192kbps.

- Device selection, press ENTER to change between deviced (max 4).

- Select - Unselect, Press ENTER to change from Select all or Select none.

- Start ripping, press ENTER to start ripping process.

Note

- To return to CDDA screen, press the RETURN button again.

- When the CD ripping is in process the player will automatically begin playing.

- Only Audio CD (CD DA) discs can be ripped.

- Because the speed is 2.6x of normal speed. User is unable to play the CD DA through the rip ping process.

Picture CD Playback

1. Select the desired folder.

2. Press the π/† buttons to select a Picture file in the clips menu and then press the ENTER but-

ton.

Note

- Press the STOP button to return to the clips menu.

- When playing a Kodak Picture CD, the unit displays the Photo directly, not the clips menu.

Rotation

- Each time the √/® button is pressed, the picture rotates 90 degrees clockwise.

- Each time the π button is pressed, the picture rotates 180 degrees.

- Each time the † button is pressed, the picture changes to the mirror appearance.

Zoom

- Each time the ENTER Button is pressed repeteadly, the picture is enlarged.zoom mode : 100%, 125%, 150%, 200%.

Slide show

- When you press the ENTER/PLAY at JPEG file,it will go to full screen mode and automaically slide show.

Note

- Depending on a file size, the amount of time between each picture may be different from the manual.

- If you don’t press any button, the slide show will start automatically in about 10 seconds by default.

CD-R JPEG Disc

- Only files with the “.jpg” and “.JPG” extensions can be played.

- If the disc has not been closed during the recording phase,(ie has not been finalised) it will take longer to start playing and not all of the recorded files may be played.

+ 22 hidden pages