Samsung DVD-927, DVD_907 Disassemble
Samsung Electronics 5-1
1) Supply power and open Tray .
2) Disassemble the door-tray in direction of arrow.
3) Close Tray and power off.
Note : If Tray doesn’t open, insert a clip into the hole (as shown in detailed drawing), and open Tray
manually.
5. Disassembly and Reassembly
5-1 DVD-907
5-1-1 Exterior and PCB Disassembly
5-1-1(a) Door-tray
Fig. 5-1
1211131
TRAY
2
DOOR-TRAY
3
CHIP
70mm
Disassembly and Reassembly
5-2 Samsung Electronics
5-1-2(b) Top cabinet
1. Remove 3 screws on the back panel.
2. Remove 4 screws , on the left and right side.
3. Lift up the top cabinet in direction of arrow.
Fig. 5-2
1
2
2
3
CABINET-TOP
2 SCREWS
1
3 SCREWS
3
2 SCREWS
Disassembly and Reassembly
Samsung Electronics 5-3
5-1-3(c) Panel-Front, PCB Front
1. Remove 2 screws , on the left and right side of panel-front ass’y
2. Remove 2 screws on the top of cover-panel ass’y and disassemble the front.
3. Remove 2 screws from PCB-front.
4. Remove 2 hooks to fix PCB-front and disassemble PCB-front.
Fig. 5-3
1
2
3
4
3
2
4
1
2 SCREWS
2 SCREWS
1 SCREW
1 SCREW
PANEL-FRONT ASS’Y
COVER-FRONT ASS’Y
Disassembly and Reassembly
5-4 Samsung Electronics
5-1-4(d) PCB-MAIN, PCB-SMPS
1. Remove 4 screws to fix PCB-MAIN.
2. Remove 2 Holder-PCB inserted in PCB-MAIN and lift up PCB-MAIN.
3. Remove 4 screws from PCB-SMPS.
4. Remove 2 Spacer-PCB inserted in PCB-SMPS and lift up PCB-SMPS.
5. Remove 2 screws to fix BRKT-PCB ass’y.
Fig. 5-4
123
4
5
1
4 SCREWS
3
4 SCREWS
4
SPACRE-PCB
5
2 SCREWS
BRKT-PCB ASS’Y
PCB-MAIN
PCB-SMPS
ASS’Y BOTTOM
2
HOLDER-PCB
Disassembly and Reassembly
Samsung Electronics 5-5
5-1-5(e) Deck, Frame-chassis
1. Remove 4 screws from the deck and lift it up.
2. Remove 1 screws and 2hooks from the frame-chassis and lift it up.
Fig. 5-5
123
1
4 SCREWS
2
1 SCREW
DECK
FRAME-CHASSIS
3
2 HOOKS
Disassembly and Reassembly
5-6 Samsung Electronics
5-1-2 PCB Locations
Fig. 5-6
PCB-MAIN
PCB-SMPS
PCB-FRONT
Loading...