Before operating the unit, please read this Instruction Book
thoroughly, and retain it for future reference.
Use only approved battery packs.
Otherwise, there is a danger of overheating, fire or explosion.
Samsung is not responsible for problems occurring due to
using unapproved batteries.
AD68-01230G
2
ENGLISH
Contents
Contents
Notes and Safety Instructions ............................ 6
Notes regarding the Rotation of the LCD Screen .................6
Notes regarding the LCD Screen, Viewfinder, Lens .............6
Notes regarding Disc Cleaning and Handling ......................7
Notes regarding DVD Camcorder ........................................8
Maintaining the Battery Pack ........................................24
Connecting a Power Source ...............................................25
Using a Household Power Source ................................25
About the Operating Modes ...............................................26
Using the Joystick ..............................................................26
Using the Q.MENU ............................................................. 27
OSD (On Screen Display) in Camera Mode/Player Mode .28
OSD (On Screen Display) in M.Cam Mode/M.Player Mode ..
29
(VP-DC173(i)/DC175WB/DC175W(i)/DC575WB/DC575Wi
DVD Camcorder: Playlist ................................... 69
Creating a New Playlist (New Playlist)
Playing the Playlist
Deleting a Playlist (Delete)
Adding Scenes to Playlist (Scene-Add)
Changing the Order of Scene Playing within a Playlist
(Scene-Move)
Deleting Scenes from Playlist (Scene-Delete)
74
Deleting a Section of a Playlist (Scene-Partial Delete)
Please rotate the LCD Screen carefully as illustrated.
Over-rotation may cause damage to the inside of the hinge
that connects the LCD Screen to the DVD Camcorder.
1. Open the LCD Screen 90 degrees with your finger.
2. Rotate it to the best angle to record or play.
If you rotate the LCD Screen 180 degrees to the lens
side, you can close the LCD Screen with it facing out.
This is convenient during playback operations.
Notes
Refer to page 36 to adjust brightness and colour of the LCD Screen.
Make sure not to contact the magnetic stripe of your credit card near the LCD panel. Your credit card information may be
removed.
Notes regarding the LCD Screen, Viewfinder, Lens
1. Direct sunlight can damage the LCD Screen, the inside of
the Viewfinder or the Lens. Take pictures of the sun only in
low light conditions, such as at dusk.
2. The LCD Screen has been manufactured using high
precision technology.
However, there may be tiny dots (red, blue or green in
colour) that appear on the LCD Screen. These dots are
normal and do not affect the recorded picture in any way.
3. Do not pick up the DVD Camcorder by holding the
Viewfinder, LCD Screen or Battery Pack.
4. Applying excessive force to the Viewfinder may damage it.
7
ENGLISH
Notes and Safety Instructions
Notes regarding Disc Cleaning and Handling
Take care not to touch the recording side (the rainbow coloured side) of the disc with your
fingers. Discs contaminated by fingerprints or foreign substances may not play properly.
Use a soft cloth to clean the disc.
Clean lightly from the centre of a disc to the outside edge. Circling or cleaning too hard
may create scratches on the disc and further cause the disc to play abnormally.
Do not use benzene, thinner, detergent, alcohol or anti-static spray when cleaning the disc.
It may cause a malfunction.
Press the supporting holder in the centre of the disc case for easy removal of the disc.
Handle discs by the edges and the centre hole to avoid finger marks on the recording side.
Do not bend or apply heat to the disc.
Always store discs vertically in their plastic cases when not in use.
Store discs away from direct sunlight, heating elements, moisture or dust.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end
of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or their local government office, for details of where and how
they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
8
ENGLISH
Notes and Safety Instructions
Notes regarding DVD Camcorder
Do not leave the DVD Camcorder exposed to high temperatures (above 60 °C or 140 °F).
For example, in a parked car in the sun or exposed to direct sunlight.
Do not let the DVD Camcorder get wet. Keep the DVD Camcorder away from rain, sea water, and any other form of
moisture.
The DVD Camcorder may get damaged if it gets wet. Sometimes a malfunction due to exposure to liquids cannot be
repaired.
A sudden rise in atmospheric temperature may cause condensation to form inside the DVD Camcorder.
- When you move the DVD Camcorder from a cold location to a warm location (e.g. from outside to inside during the
winter.)
- When you move the DVD Camcorder from a cool location to a hot location (e.g. from inside to outside during the
summer.)
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug
Television programmes, video tapes, DVD titles, films, and other programme materials may be copyrighted.
Unauthorized copying of copyrighted material may be against the law.
All the trade names and registered trademarks mentioned in this manual or other documentation provided with your Samsung
product are trademarks or registered trademarks of their respective holders.
Servicing & Replacement Parts
Do not attempt to service this DVD Camcorder yourself.
Opening or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer that have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock or other hazards.
9
ENGLISH
Getting to Know Your DVD Camcorder
Features
DVD Disc Camcorder
DVD-VIDEO recording with 8cm DVD-RW/+RW/DVDR/+R DL(Dual Layer) discs.
High Power Zoom Lens
Offers you High Power Zoom Lens with 34x (VPDC171(i)/DC171Bi/DC171W(i)/DC171WB/DC172W/
DC173(i)/DC175WB/DC175W(i) only) Zoom Lens, 26x
Zoom Lens (VP-DC575WB/DC575Wi only).
You can transfer images to a PC using the USB interface
without an add-on card.
Photo Capture (VP-DC173(i)/DC175WB/DC175W(i)/
DC575WB/DC575Wi only)
The Photo Capture function lets you capture the scene
you want while the disc is in play, and save as a still
image on a Memory Card.
1200x Digital Zoom
Allows you to magnify an image up to 1200 times its
original size.
Colour TFT LCD
A high-resolution colour TFT LCD gives you clean, sharp
images as well as the ability to review your recordings
immediately. Also 2.7 inch Wide LCD. (VP-DC171W(i)/
DC171WB/DC172W/DC175WB/DC175W(i)/DC575WB/
DC575Wi only).
LCD Enhancer
It can give you a clear quality image on LCD Screen even
in the outdoors with bright daylight.
Mega-pixel CCD (VP-DC575WB/DC575Wi only)
Digital Image Stabilizer (DIS)
Various Digital Effects
Digital Still Camera Function (VP-DC173(i)/DC175WB/
Moving Image Recording (VP-DC173(i)/DC175WB/
MMC/SD Card Slot (VP-DC173(i)/DC175WB/
Multi OSD Language
Your DVD Camcorder incorporates a 1.0 mega-pixel
CCD. High-resolution photo images can be recorded to a
Memory Card.
The DIS compensates for any handshake, reducing
unstable images particularly at high magnification.
The Digital Effects allow you to give your recordings a
special look.
DC175W(i)/DC575WB/DC575Wi only)
- Using a Memory Card, you can easily record and
playback standard photo images.
- You can transfer standard photo images on a
Memory Card to your PC using the USB interface.
DC175W(i)/DC575WB/DC575Wi only)
Moving image recording makes it possible to record video
onto a Memory Card.
DC175W(i)/DC575WB/DC575Wi only)
MMC/SD card slot can use MMC (Multi Media Cards) and
SD cards.
You can select the desired OSD language from OSD list.
10
ENGLISH
DVD+ReWritable
DVD+RDL
DVD+R DL
DVD+ReWritable
DVD+RDL
DVD+ReWritable
DVD+RDL
Getting to Know Your DVD Camcorder
Learning available Discs and Their Features
This DVD Camcorder can record or play back by using only the 8cm DVD-R/+R DL/-RW/+RW disc (not supplied). Please
check whether your disc is proper for use.
Which discs are available?
DVD-R
DVD+R DL
You can record it only once.
You cannot delete or edit the
recordings.
After finalised a disc, you can
play back the recordings in
most common DVD players.
You cannot use
the following
discs.
DVD-RW
You can record and edit it many times.
(You can delete recorded image files or format the disc and
reuse it again.)
Format the disc in the mode you want according
to your needs.
Video mode:
will play in most common DVD player.
VR (Video Record) mode:
recordings on your DVD camcorders. But you can play the
disc only on a DVD Recorder that supports VR mode.)
You can delete or format but
cannot edit the recordings.
You can play back the
DVD+RW disc on other DVD
players without finalising it.
11
ENGLISH
Getting to Know Your DVD Camcorder
DVD+ReWritable
DVD+RDL
DVD+R DL
DVD+ReWritable
DVD+RDL
DVD+ReWritable
DVD+RDL
Which discs recorded on the DVD Camcorder can be played in
DVD players/recorders/drives?
Discs must be finalised before they can be played on common DVD player/recorders.
Finalising is a process required to make the DVD discs you recorded playable on common DVD players.
DVD-R
DVD+R DL
DVD player
DVD recorder
DVD drive-equipped PC
DVD-RW
In case of Video mode
DVD player
DVD recorder
DVD drive-equipped PC
In case of VR mode
DVD recorder that supports DVD-RW VR mode.
DVD+RW
DVD player
DVD recorder
DVD drive-equipped PC
You can play back DVD+RW discs on
other DVD players or DVD recorders
without finalising them.
Notes
We are not responsible for data loss on a disc.
You may not be able to play discs recorded from a PC or DVD recorder. When such a case occurs, the message Bad
Disc! may be displayed.
We do not warranty any damage or loss incurred due to recording and playback failure caused by disc or card malfunction.
We take no responsibility and offer no compensation for any recording failure, loss of recorded or edited material and/or
damage to the recorder arising from the misuse of discs.
For stable and perpetual recording and playback, use the TDK, MKM, Verbatim disks that have the sign “for VIDEO
CAMERA
TM
” If you don’t use them, operations for recording and playback may not work properly or you may not eject the
inserted disc from the DVD Camcorder.
You cannot overwrite, edit, or format the finalised disc. If needed, unfinalise the disc. (DVD-RW only) page 82
It is not guaranteed that all players can play back the disc. For compatibility details, refer to the manual of the player where
you want to play back the disc.
For more information about the categories of available disks, see page 123.
12
ENGLISH
P
H
OTO
Getting to Know Your DVD Camcorder
How to use the DVD Camcorder easily
You can record any desired image and edit and playback the disc on a DVD Camcorder, most common DVD players, and PCs
after finalising the disc.
Recording
Selecting the desired disc and disc formatting page 42
Recording the desired Images page 44
Playing Back
Selecting a scene to play back from the thumbnail index screen page 64
Editing
You may edit only in DVD-RW (VR Mode). page 68
Finalising
Discs must be finalised before they can be played on standard DVD player/recorders.
You may play back DVD+RW discs on other devices without finalising them.
13
ENGLISH
Getting to Know Your DVD Camcorder
Accessories Supplied with the DVD Camcorder
Make sure that the following basic accessories are supplied with your DVD Camcorder.
Basic Accessories
1. Lithium Ion Battery Pack (SB-LSM80)
2. AC Power Adapter (AA-E9 TYPE)
3. AV Cable
4. Instruction Book
5. Lithium Batteries for Remote Control (VP-DC172W/
DC173(i)/DC175WB/DC175W(i)/DC575WB/
DC575Wi only) and Clock. (TYPE: CR2025)
6. Remote Control (VP-DC172W/DC173(i)/DC175WB/
DC175W(i)/DC575WB/DC575Wi only)
7. USB Cable (VP-DC173(i)/DC175WB/DC175W(i)/
DC575WB/DC575Wi only)
8. Software CD (DV Media PRO) (VP-DC173(i)/
DC175WB/DC175W(i)/DC575WB/DC575Wi only)
9. Lens Cover
10. Lens Cover Strap
Optional Accessories
11. 8cm DVD-RW Disc
12. Carrying Case
Notes
The contents can vary depending on the sales
region.
Parts and accessories are available at your local
Samsung dealer.
1. Lithium Ion Battery Pack
(SB-LSM80)
4. Instruction Book5. Lithium Batteries (CR2025)6. Remote Control
7. USB Cable8. Software CD9. Lens Cover
10. Lens Cover Strap11. 8cm DVD-RW Disc12. Carrying Case
Illustrations of model VP-DC175WB are
used in this owner’s instructions. Although
the models covered in this manual look
different, they all operate in a similar way.
Remote Control (VP-DC172W/DC173(i)/DC175WB/DC175W(i)/DC575WB/DC575Wi only)
1. START/STOP
2. DISPLAY
3. /(Skip)
4. (Stop)
5.
6. MENU
7. Up(
page 29
(Play/Still)
)/Down( )/Left( )/Right( )/OK
page 46
8
9
10
11
12
1
2
3
4
5
6
7
8. PHOTO
9. W/T (Zoom)
10. /(Search)
11. |
12. Q-MENU
(Slow)
page 94
19
ENGLISH
PHOTO
Preparation
Using the Hand Strap & Lens Cover
It is very important to ensure that the Hand Strap has been correctly adjusted before you begin your recording.
The Hand Strap enables you to:
- Hold the DVD Camcorder in a stable, comfortable position.
- Press the [Zoom] lever and [Record Start/Stop] button without having to change the position of your hand.
Hand Strap
1. Pull and open the Hand Strap and release the Hand Strap.
Insert the Hand Strap into the Hand Strap Hook.
2. Insert your hand into the Hand Strap and adjust its length.
3. Close the Hand Strap.
Lens Cover
1. Hook up the Lens Cover with the Lens Cover Strap as illustrated.
2. Pull and open the Hand Strap and release the Hand Strap.
3. Hook up the Lens Cover Strap to the Hand Strap and adjust it
following the steps as described for the Hand Strap.
4. Close the Hand Strap.
Installing the Lens Cover after Operation
Press buttons on both sides of the Lens Cover, then insert it so it covers
the DVD Camcorder Lens.
124
1
2
3
20
ENGLISH
Preparation
Lithium Battery Installation
Lithium Battery Installation for the Internal Clock
1. Remove the Battery Pack from the rear of the DVD Camcorder.
2. Open the Lithium Battery Cover on the rear of the DVD Camcorder.
3. Position the Lithium Battery in the Lithium Battery Holder, with the
positive (+) terminal face up.
Be careful not to reverse the polarity of the Battery.
4. Close the Lithium Battery Cover.
Installing the Lithium Battery in the Remote Control
(VP-DC172W/DC173(i)/DC175WB/DC175W(i)/DC575WB/DC575Wi only)
1. Turn the battery holder counterclockwise (as indicated with [ ] mark),
using your fingernail or a coin to open it. The battery holder opens.
2. Insert the battery while the positive (+) terminal faces down and press it
firmly until you hear locking sound.
3. Place the battery holder to match its [
remote control, and turn the battery holder clockwise to fix it.
] mark with the [] mark on the
Precautions regarding the Lithium Battery
1. The Lithium Battery maintains the clock function and preset contents of the memory; even if the Battery Pack or AC Power
adapter is removed.
2. The Lithium Battery for the DVD Camcorder lasts about 6 months under normal operation from time of installation.
3. When the Lithium Battery becomes weak or dead, the date/time indicator will display 00:00 01.JAN.2007 when you set the
Date/Time to On. When this occurs, replace the Lithium Battery with a new one (type CR2025).
4. There is a danger of explosion if Lithium Battery is incorrectly replaced. Replace only with the same or equivalent type.
123
Battery
Holder
Warning: Keep the Lithium Battery out of reach of children. Should a battery be swallowed, consult a doctor
immediately.
21
ENGLISH
Preparation
Using the Lithium Ion Battery Pack
Use SB-LSM80 or SB-LSM160 (not supplied) Battery Pack only.
The Battery Pack may be charged a little at the time of purchase.
Charging the Lithium Ion Battery Pack
1. Turn the [Power] switch to [OFF].
2. Attach the Battery Pack to the DVD Camcorder.
3. Connect the AC Power adapter(AA-E9 TYPE) to a wall socket.
4. Open the DC IN Jack Cover.
5. Connect the DC cable to the DC IN jack on the DVD Camcorder.
The charging indicator will start to blink, showing that the
Battery is charging.
6. When the Battery is fully charged, disconnect the Battery Pack and
the AC Power Adapter from the DVD Camcorder. Even with the
Power switched off, the Battery Pack will still discharge.
Blinking timeCharging rate
Once per secondLess than 50%
Twice per second50% ~ 75%
Three times per second75% ~ 90%
Blinking stops and stays on90% ~ 100%
On for a second and off for a
second
Error - Reset the Battery Pack and
the DC Cable
Power Switch
5
<Charging indicator>
22
ENGLISH
Preparation
Charging, Recording Times based on Battery Type
If you close the LCD Screen, it switches off and the Viewfinder switches on automatically.
The continuous recording times given in the table below are approximations.
Actual recording time depends on usage.
The continuous recording times in the operating instructions are measured using a fully charged Battery Pack at 77 °F
(25 °C).
Even when the power is switched off, the Battery Pack will still discharge if it is left attached to the device.
Battery TypeSB-LSM80SB-LSM160 (not supplied)
Charging timeApprox.1hr 30minApprox. 3hr
Mode Continuous recording timePlayback timeMode Continuous recording timePlayback time
LCD ON
Viewfinder
LCD ON
Viewfinder
LCD ON
Viewfinder
The amount of continuous recording time available depends on;
- The type and capacity of the Battery Pack you are using.
- Ambient temperature.
- How often the Zoom function is used.
- Type of use (DVD Camcorder/Camera/With LCD Screen etc.).
It is recommended that you have several batteries available.
Measured times shown above are based on model VP-DC171
23
ENGLISH
Preparation
Battery Level Display
The battery level display indicates the amount of power remaining in the Battery Pack.
a. Fully charged
b. 20~40% used
c. 40~80% used
d. 80~95% used (red)
e. Completely used (Blinking)
(The DVD Camcorder will turn off soon, change the battery as soon as possible.)
The Finalise/Format functions are not available at battery level ‘d’ and ‘e’.
At battery level ‘e’
The battery becomes low in capacity and the <> indicator blinks on the display.
The screen will turn blue when the battery is almost completely discharged.
Battery Pack Management
The Battery Pack should be recharged in an environment between 32 °F (0 °C) and 104 °F (40 °C).
The Battery Pack should never be charged in a room with a temperature that is below 32 °F (0 °C).
The life and capacity of the Battery Pack will be reduced if it is used in temperatures below 32 °F (0 °C) or left in
temperatures above 104 °F (40 °C) for a long period of time, even when it is fully recharged.
Do not put the Battery Pack near any heat source (i.e. fire or a heater).
Do not disassemble, apply pressure to, or heat the Battery Pack.
Do not allow the + and – terminals of the Battery Pack to be short-circuited. It may cause leakage, heat generation, induce
overheating or fire.
24
ENGLISH
Preparation
Maintaining the Battery Pack
Please refer to the Table on page 22 for approximate continuous recording time.
The recording time is affected by temperature and environmental conditions.
The recording time shortens dramatically in a cold environment.
The continuous recording times in the operating instructions are measured using a fully charged Battery Pack at 77 °F (25 ° C).
The remaining battery time may differ from the approximate continuous recording times given in the instructions.
When replacing the battery pack, only use the same type as is supplied with this camcorder and is available from your
SAMSUNG retailer.
When the Battery reaches the end of its life, please contact your local dealer.
The batteries have to be dealt with as chemical waste.
Make sure that the Battery Pack is fully charged before starting to record.
A brand new Battery Pack is not charged. Before using the Battery Pack, you need to charge it completely.
Fully discharging a Lithium Ion Battery damages the internal cells.
The Battery Pack may be prone to leakage when fully discharged.
To preserve battery power, keep your DVD Camcorder turned off when you are not operating it.
If your DVD Camcorder is in Camera Mode, and it is left in STBY mode without being operated for more than 5 minutes
with a disc inserted, it will automatically turn itself off to protect against unnecessary battery discharge.
Make sure that the Battery Pack is fitted firmly into place.
Do not drop the Battery Pack. Dropping the Battery Pack may damage it.
25
ENGLISH
Preparation
Connecting a Power Source
There are two types of power source that can be connected to your DVD Camcorder.
- The AC Power adapter: used for indoor recording.
- The Battery Pack: used for outdoor recording.
Using a Household Power Source
Connect to a household power source to use the DVD Camcorder without having to worry about the battery power. You can
keep the Battery Pack attached; the battery power will not be consumed.
1. Connect the AC Power adapter (AA-E9 TYPE) to a wall
socket.
The plug and wall socket type may differ according to
your resident country.
2. Open the DC IN Jack Cover.
3. Connect the DC cable to the DC IN jack of the DVD
Camcorder.
4. Set the DVD Camcorder to each mode by holding down
the Green Tab on the
[Power] switch to [ON] or [OFF].
[Power] switch and turning the
Power Switch
26
ENGLISH
Preparation
About the Operating Modes
The operating modes are determined by the position of the [Power] and [Mode]
DC575WB/DC575Wi only)
Set the Operation Mode by adjusting the [Power] and [Mode] (VP-DC173(i)/DC175WB/DC175W(i)/DC575WB/DC575Wi
only) switches before operating any functions.
Each time you move the [Power] switch downward, it toggles between [(Camera)] and [(Player)] mode.
[Joystick] up or down to select <System>, then press the [Joystick].
[Joystick] up or down to select <Clock Set>, then press the [Joystick].
The day will be highlight first.
[Joystick] up or down to set current day, then press the [Joystick].
The day will be highlighted.
To adjust the clock, select the Year, Month, Day, Hour, or Min by pressing the
[Joystick], then move the [Joystick] up or down to set respective values.
7. You can set the month, year, hour, and minute following the same procedure after
setting the day.
8. Press the
9. To exit, press the
[Joystick] after setting minute.
A message <Complete!> is displayed.
[MENU] button.
Notes
After the Lithium Battery loses its charge (after about 6 months), the date/time appears
on the screen as 00:00 01.JAN.2007.
You can set the year up to 2040.
If the Lithium Battery is not installed, data inputted will not be backed up.
Display illustrations in this manual
OSD illustrations of VP-DC175WB are used in this manual. Some of the OSD items
shown in this manual may differ slightly from the actual items on your DVD Camcorder.
4
Camera Mode
►System
Clock Set
Beep Sound
Language
Demonstration
Move OK Select
5
Camera Mode
►System
Clock Set
Beep Sound
Language
Demonstration
Adjust OK Select
8
Camera Mode
►System
Clock Set
Beep Sound
Language
Demonstration
Move OK Select
►On
►English
►On
MENU
01 JAN 2007
00 : 00
MENU
01 JAN 2007
00 : 00
Complete!
MENU
Exit
Exit
Exit
Loading...
+ 102 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.