Samsung CL21Z50, CL21Z57, CLZ58, CL21Z530, CL21A730 User Manual

COLOR TELEVISION

CL21Z43/21Z50/21Z57/21Z58/ 21A530/21A730

Connection Panel (depending on the model)

The product color and shape may vary depending on the

➢

model.

Rear Jack

Side Jack

Owner’s Instructions

Before operating, please read this manual carefully,

and retain it for future reference.

Record your Model and Serial number.

▪ Model __________ ▪ Serial No. __________

Control Panel (depending on the model)

The product color and shape may vary depending on the

➢

model.

Front Panel

1 On-screen menu display 2 Volume adjustment 3 Channel selection 4 Remote control sensor 5 Indicator (Standby or Timer) 6 Power on/off

 The 2 and 3 buttons also have the same function as the

◄/►/▲/▼ buttons on the remote control.

 If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the television.

Whenever you connect an audio or video system to your

➢

television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks.

1 Audio/Video Output Jacks

Connect to the audio/video input jacks of a recording VCR.

2 Audio/Video Input Jacks

Connect to the audio/video output jacks of VCRs, DVD players and similar devices.

3 Component Video Input Jacks (Y, PB, PR)

Connect to the Component video outputs of a DVD or DTV set-top box. 480i video signal input is available. When using the Component Video input, connect audio jacks to “AV IN 2 (AUDIO-L/R)”.

4 ANT IN

Connect to an antenna or to a cable TV system.

2 3

Please be sure to match the color coded input terminals

➢

and cable jacks. When both the side and rear jacks (AV IN 2) are connected to external equipment, the side receives priority.

1 Audio Input Jacks

Connect audio signals from a camcorder or video game.

2 Video Input Jack

Connect a video signal from a camcorder or video game.

3 Headphone Jack

Connect a set of external headphones to this jack for private listening.

English - 1

AA68-03806S-01

Remote Control (depending on the model)

Turning the TV On and Off

Operation of remote control may be affected by bright

➢

artificial light near to the TV.

This is a special remote control for the visually impaired,

➢

and has Braille points on the POWER, Channel and Volume buttons.

1 POWER

Turns the TV on and off.

2 Number buttons

Press to select channels directly on the TV.

3 –

Press to select channels over 100. For example, for channel 122, press “-”, then “2”, then “2”.

4 VOL +, VOL -

Press to increase or decrease the volume.

5 MENU

Displays the main on-screen menu.

6 ▲/▼/◄/►

Controls the cursor in the menu.

7 ENTER

While using the on-screen menus, press activate (or change) a particular item.

8 MTS

(Multi-channel Television Sound) Press to choose “Stereo”, “Mono”, or “SAP” (Secondary Audio Program).

ENTER to

9 R.SURF

Press to automatically return to a preferred channel after a userpreset time delay.

0 SOURCE

Press to display all of the available video sources.

! INFO

Press to display information on the TV screen.

@ PRE-CH

Tunes to the previous channel.

# CH , CH

Press to change channels.

$ EXIT

Press to exit the menu.

% MUTE

Press to temporarily cut off the sound.

^ SLEEP

Press to select a preset time interval for automatic shut off.

Press the POWER button on the remote control. You can also use the POWER button on the TV.

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and “Setup”.

2 Press the ▲ or ▼ button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

3 Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4 Press the ▲/▼/◄/► button to change the selected items.

Press the MENU button to return to the previous menu.

5 Press the EXIT button to exit from the menu.

Installing Batteries

Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate normally, check that the “+” and “–” ends of the batteries are inserted correctly or the batteries are drained.

Do not mix battery types, i.e. alkaline and manganese.

➢

English - 2

English - 3

Setup - Plug & Play

Input - Source List / Edit Name

When the TV is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.

1 Press the POWER button

on the remote control. The message “Plug & Play” is displayed. It flickers for a little while and

Plug & Play

then Language menu is automatically displayed.

2 Press the ◄ or ► button to

select the language, then press the MENU button. The message “Ant input check” is displayed.

Time ►

Plug & Play

Caption

Language : English

▼ More

Setup

Adjust Skip

►

3 Make sure that the antenna

is connected to the TV. Press the ENTER button,

Ant input check

then the “Channel” is displayed.

4 Press the ◄ or ► button to

select “Air”, “STD”, “HRC”, or “IRC”, then the MENU button. The message “Auto Program” is displayed.

Auto Program Skip

Auto Program ►

Add/Delete : Deleted ►

Air/CATV : Air

Name :

Adjust Skip

Channel

----

6 After all available channels

are stored, the “Time” is displayed. Press the ENTER button. Press the ◄ or ► button to move to the hour or minute. Set the clock by pressing the ▲ or ▼ button.

6 When you have finished,

press the MENU button. The “Enjoy your watching.” is displayed.

Plug & Play feature

➢

doesn’t work in the AV mode.

Re-setting the Plug & Play

Method: MENU  ▲/▼ (Setup)  ENTER  ▲/▼ (Plug & Play)  ENTER

Clock -- : -- am

On Timer

Off Timer

Sleep Timer : Off

On Timer Volume : 10

Move Enter Return

Enjoy your watching

Time ►

Plug & Play

Caption

Language : English

▼ More

Move Enter Return

Time

-- : -- am Off

Setup

►

 Source List

You can switch between viewing signal from connected equipment, such as a VCR, DVD, set-top

AV1

AV2

Component

box, and the TV source (broadcast or cable).

Press the SOURCE

➢

button on the remote control repeatedly to select the

Move Enter Return

desired signal source.

 Edit Name

You can give a name to the external source.

AV1 : -- --

AV2 :

Component :

Move Enter Return

Source List

-- --

Edit Name

-- --

VCR DVD

-- --

Cable STB Sat. STB

-- --

AV Recv. DVD Recv. Game Camcorder DVD Combo

5 Press the ENTER button to

select “Start”. The TV will begin memorizing all of the available channels. Press the

ENTER button to stop.

Auto Program

Air 7

Start

Enter Skip

continued...

+ 5 hidden pages