Samsung CL-21A730EQ User Manual

COLOR TELEVISION

CL21Z43/21Z45/21Z47/21Z50/

21Z57/21Z58/21AE0/21AF0/ 21AJ0/21BF0

TX-T2041

Owner’s Instructions

Before operating, please read this manual carefully,

Control Panel (depending on the model)

The product color and shape may vary depending on the

➢

Front Panel

1 On-screen menu display 2 Volume adjustment 3 Channel selection 4 Remote control sensor 5 Indicator (Standby or Timer) 6 Power on/off

and retain it for future reference.

Record your Model and Serial number.

▪ Model __________ ▪ Serial No. __________

model.

Connection Panel (depending on the model)

The product color and shape may vary depending on the

➢

model.

Whenever you connect an audio or video system to your

➢

television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks.

1 Audio/Video Output Jacks

Connect to the audio/video input jacks of a recording VCR.

2 Audio/Video Input Jacks

Connect to the audio/video output jacks of VCRs, DVD players

and similar devices.

3 Component Video Input Jacks (Y, PB, PR)

Connect to the Component video outputs of a DVD or DTV

set-top box. 480i video signal input is available.

When using the Component Video input, connect audio jacks to “AV IN 2 (AUDIO-L/R)”.

4 ANT IN

Connect to an antenna or to a cable TV system.

Side JackRear Jack

2 3

Please be sure to match the color coded input terminals

➢

and cable jacks.

When both the side and rear jacks (AV IN 2) are

connected to external equipment, the side receives priority.

1 Audio Input Jacks

Connect audio signals from a camcorder or video game.

2 Video Input Jack

Connect a video signal from a camcorder or video game.

3 Headphone Jack

Connect a set of external headphones to this jack for private listening.

 The 2 and 3 buttons also have the same function as the

◄/►/▲/▼ buttons on the remote control.

 If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the television.

English - 1

AA68-03972D-03

English - 2

Remote Control (depending on the model)

Turning the TV On and Off

Operation of remote control may be affected by bright

➢

artificial light near to the TV.

This is a special remote control for the visually impaired,

➢

and has Braille points on the POWER, Channel and Volume buttons.

1 POWER

Turns the TV on and off.

2 Number buttons

Press to select channels

directly on the TV.

3 –

Press to select channels over 100. For example,

for channel 122, press “-”, then “2”, then “2”.

4 VOL +, VOL -

Press to increase or decrease the volume.

5 MENU

Displays the main on-

screen menu.

6 ▲/▼/◄/►

Controls the cursor in the menu.

7 ENTER

While using the on-screen menus, press ENTER to activate (or change) a particular item.

8 MTS

(Multi-channel Television Sound) Press to choose

“Stereo”, “Mono”, or “SAP” (Secondary Audio

Program).

9 R.SURF

Press to automatically return to a preferred channel after a userpreset time delay.

0 SOURCE

Press to display all of the available video sources.

! INFO

Press to display

information on the TV

screen.

@ PRE-CH

Tunes to the previous channel.

# CH , CH

Press to change channels.

$ EXIT

Press to exit the menu.

% MUTE

Press to temporarily cut off the sound.

^ EZ.VIEW

Used to display Channel

Grouping, Channel Minimizer, Channel Schedule, Music Mode, Half Mute menu.

Press the POWER button on the remote control. You can also use the POWER button on the TV.

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and

Setup.

2 Press the ▲ or ▼ button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

3 Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4 Press the ▲/▼/◄/► button to change the selected items.

Press the MENU button to return to the previous menu.

5 Press the EXIT button to exit from the menu.

Installing Batteries

Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate

normally, check that the “+” and “–” ends of

the batteries are inserted correctly or the batteries are drained.

Do not mix battery types, i.e. alkaline and manganese.

➢

English - 3

Setup - Plug & Play (depending on the model)

Input - Source List

When the TV is initially powered on, several basic customer

settings proceed automatically and subsequently. The following settings are available.

1 Press the POWER button on

the remote control. The message “Start Plug

& Play” is displayed. It

Plug & Play

Start Plug & Play

Enter

Exit

flickers for a little while and

then Language menu is

automatically displayed.

2 Press the ▲ or ▼ button to▲ or ▼ button to button to

select the language, then press the ENTER button. The

Language

English

Español Português Français

Plug & Play

message “Check antenna

input” is displayed.

If any language is not

➢

selected, the language menu will disappear about 30 seconds later.

3 Make sure that the antenna is

connected to the TV.

Enter

Plug & Play

Check antenna input.

Enter

Plug & Play

Auto Program

Skip

Move

Press the ENTER button,

then the “Auto Program” is

displayed.

4 Press the ENTER button to

select “Start”. The TV will

begin memorizing all of the available channels. Press the ENTER button to stop.

Auto Program

Air 3 7 %

Start

Enter Skip

Plug & Play

Stop

Enter Skip

5 After all available channels

are stored, the “Clock set” is

displayed. Press the ENTER

button. Press the ◄ or ►

button to move to the hour or minute. Set the clock by

pressing the ▲ or ▼ button.

6 When you have finished,

Plug & Play

Clock Set 12:00 am

Move Adjust

Enter Skip

 Source List

You can switch between viewing signal from connected

equipment, such as a VCR,

AV1 AV2 Component

DVD, set-top box, and the TV

source (broadcast or cable).

Press the SOURCE

➢

button on the remote

Move Enter Return

control repeatedly to select the desired signal source.

Source List

press the MENU button.

The “Enjoy your watching.”

is displayed and then the channel which has been stored will be activated.

Plug & Play feature doesn’t work in the AV mode,

➢

and then the channel which has been stored will be

Enjoy your watching.

activated.

Plug & Play ►

Language : English ►

Re-setting the Plug & Play

Method: MENU  ▲/▼ (Setup)  ENTER  ▲/▼ (Plug & Play)  ENTER

Time ►

Caption : Off

Child Lock ► Blue Screen : Off ► Melody : On ► Music Mode : Off ►

Move Enter Return

Setup

continued...

+ 5 hidden pages