Page 1
Array course control
4.
Software Adjustments
4-1.
Test Jig(GH
Test Cable(GH39-01290A) RF Test Cable(GH39-00985A)
99-36900
A)
Test Jig Power(GH99-38251A)
4-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Page 2
Array course control
Software Downloading
4-2.
4-2-1.
•
•
•
•
4-2-2.
■
Pre-requsite for Downloading
Downloader Program
(
bfloader
exe
.
)
GT-C3230 Mobile Phone
Data Cable
Binary file,
S/W Downloader Program
Load the phone binary download program by executing the
“
bfloader
exe"
.
bfloader Setting
Target setting
Command & erase setting
4-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Page 3
Partial Download Setting(1/2)
Start download
Array course control
Erase mode
Partial Download Setting(
2/2)
·Caution
· IF ptt file changed ( address or offset or size value ), you have to
download full region.
In this case, you can not download partition region.
· To download partial region pttfilemustbesame.
· If all files are downloaded, it is recommended to do full reset.
· Full reset : *2767*3855#
4-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Loading...