Samsung 4000, BN68-02624B-05 User Manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comment contacter Samsung dans le monde
Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.
Country
CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca Samsung Electronics Canada Inc., Customer
U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us Samsung Electronics America, Inc.
Customer Care Center
Web Site
Address
Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada
85 Challenger Road
Ridgeeld Park, NJ 07660-2112
LED TV
user manual
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
Model _____________ Serial No. _____________
BN68-02624B-05
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
See the warranty card for more information on warranty terms.
Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on no expanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as well as burned in images, are not covered by your Samsung limited warranty.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)
products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited
Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or
replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free: – In the United States : 1-800-SAMSUNG (1-800-726-7864) – In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause uneven wear of the screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try to display a full screen image.
• Reducing brightness and contrast will help to avoid the appearance of after-images.
• Use all TV features designed to reduce image retention and screen burn, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
x
The appearance may differ depending on the product.
Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand. Installation with a wall-mount.
2
4 inches
English
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
Contents
Getting Started
y List of Features ......................................................... 4
y Accessories .............................................................. 4
y Install the Stand
(UN19C4000, UN22C4000) ...................................... 5
y Install the Stand (UN26C4000) ..................................5
y Viewing the Control Panel ......................................... 6
y Viewing the Remote Control ...................................... 7
y Connecting to an Antenna ........................................8
y Plug & Play (Initial Setup) ........................................... 8
Connections
y Connecting to an AV Device ......................................9
y Connecting to an Audio Device ...............................10
y Connecting to a PC ................................................11
y Changing the Input Source .....................................12
Basic Features
y How to Navigate Menus .......................................... 12
y Channel Menu ........................................................ 13
Seeing Channels 13 Using Favorite Channels 13 Memorizing channels 14 Editing Channels 14 Other Features 14
y Picture Menu ..........................................................15
Changing the Preset Picture Mode 15 Adjusting Picture Settings 15 Economical Solutions 16 Changing the Picture Options 16 Setting up the TV with Your PC 18
y Sound Menu ...........................................................18
Changing the Preset Sound Mode 18 Adjusting Sound Settings 18 Sound Settings 18
y Setup Menu ............................................................19
Setting the Time 19 Using the Sleep Timer 20 Setting the On / Off Timer 20 Locking Programs 20 Other Features 22 Picture In Picture (PIP) 23
y Support Menu ......................................................... 23
Advanced Features
y Media Play ..............................................................25
Connecting a USB Device 25 Screen Display 26 Playing Multiple Files 29 Media Play - Additional Functions 29
y Anynet+ ................................................................. 31
Setting Up Anynet+ 32 Switching between Anynet+ Devices 32 Recording 32 Listening through a Receiver 33 Troubleshooting for Anynet+ 33
Other Information
y Assembling the Cables ...........................................34
y Installing the Wall Mount .........................................34
y Anti-theft Kensington Lock ...................................... 36
y Securing the TV to the Wall ..................................... 36
To Avoid the TV from Falling 36
y Troubleshooting ......................................................37
Storage and Maintenance 39
y License ................................................................... 40
y Specifications ......................................................... 40
y Dimensions .............................................................41
y Index ...................................................................... 42
ENGLISH
t
This function can be used by pressing the
TOOLS
TOOLS button on the remote control.
Check the Symbol!
Note
Indicates additional information.
Step by Step Guide
Check here for instructions on how to open
the relevant submenu within the OSD (on
screen display).
English
3
Getting Started
Getting Started
List of Features
y Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed
without a cable box / STB (Set-Top-Box) satellite receiver (Set-Top Box). y Media Play: Allows you to play music files, pictures, and movies saved on a USB device (p. 25). y Self Diagnosis: You can check to make sure picture and sound operate normally (p. 23).
Accessories
Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
The items' colors and shapes may vary depending on the models.
y Remote Control (BN59-00996A) & Batteries (AAA x 2) y Owner’s Instructions y Warranty Card / Safety Guide / Quick Setup Guide
(M4 X L8)
Blanking Bracket (BN63-06542B) Cable Tie
(26 inch model Only) (BN61-05596A)
y Cleaning Cloth (BN63-01798B) y Power Cord (3903-000527)
Holder-Wire stand
(BN61-05491A)
(26 inch model Only)
For best cable connection to this product, be sure to use cables with a maximum thickness as below:
y Maximum thickness - 0.55 inches (14mm)
Input Cables (Sold Separately)
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA
Holder-Wire (3EA)
(BN61-05373A)
(26 inch model Only)
Holder-Ring (4EA)
BN61-05280A
(26 inch model Only)
4
English
Install the Stand (UN19C4000, UN22C4000)
See separate guide for installing the stand.
Stand Base Stand Body
Follow the steps below to connect the TV to the stand.
RELEASE
01 Getting Started
LOCK
1. Insert the stand body into the
stand base.
NOTE
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Lay the product down, with the screen facing up and fasten the screws.
x
2. Screw the stand base to the stand
body.
3. Slide the TV onto the stand body.
Install the Stand (UN26C4000)
See separate guide for installing the stand.
s
Stand (1EA) Guide Stand (1EA) Screws (10EA)
Follow the steps below to connect the TV to the stand.
Top view
Screws (M4 X L12)
Guide Stand
Stand
s
s
s
s
s
Rear
1. Connect the Guide Stand to the Stand
2. With your TV upright,
using five screws (M4 X L12) as shown.
s
s
s
s
s
s
s
s
s
connect the TV to the Stand as shown.
(A)
(B)
2
1
3. Fasten two screws (M4 X
L8) at position 1, and then fasten three screws (M4 X L8) at position 2.
5EA (M4 X L12)
5EA (M4 X L8)
s
s
s
s
s
NOTE
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Make sure that at least two persons lift and move the LED TV.
x
Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to
x
one side.
English
5
Getting Started
Viewing the Control Panel
The product color and shape may vary depending on the model.
Power Indicator
Speakers
Remote control sensor Aim the remote control towards this spot on the TV.
SOURCE
MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
(Power)
Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTER button on the remote control.
Adjusts the volume. In the OSD, use the and buttons on the remote control.
Changes the channels. In the OSD, use the and buttons on the remote control.
Turns the TV on or off.
Remote control sensor
buttons as you would use the
buttons as you would use the
6
English
Viewing the Remote Control
This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume
buttons.
POWER SOURCE
Turns the TV on and off
01 Getting Started
Selects the HDMI mode directly.
Press to directly access channels.
Press to select additional channels
(digital) being broadcasted by the same
station. For example, to select channel
"54-3", press "54", then press" - "and
"3".
Adjusts the volume.
Brings up the OSD.
Displays Media Play (p. 25).
Quickly select frequently used functions.
Returns to the previous menu.
Buttons used in the Channel list,
Media Play menu, etc.
Use these buttons in Media Play and
Anynet+ modes (p. 25, 31).
(: Controls recording for Samsung
recorders that have the Anynet+ feature)
HDMI
CHLIST
MENU
MEDIA.P
TOOLS
RETURN
A B C D
S.MODE
P.MODE
SLEEP
P.SIZE
PRE-CH
FAV.CH
INFO
EXIT
MTS
CC
Displays and selects the available video sources (p. 12).
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays the channel list on the screen (p. 13).
Displays Favorite Channel Lists on the screen (p. 13).
Displays information on the TV screen.
Selects the on-screen menu items and changes the values seen on the menu.
Exits the menu.
S.MODE: Press to select the sound
mode (p. 18).
SLEEP: Automatically shuts off the TV at
a preset time (p. 20).
MTS: Press to choose stereo, mono
or Separate Audio Program (SAP broadcast) (p. 19).
P.MODE: Press to select the picture
mode (p. 15).
P.SIZE: Selects the picture size (p. 17). CC: Controls the caption decoder (p.
22).
Installing batteries (Battery size: AAA)
NOTE
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the remote
x
control. Avoid use when nearby fluorescent lights or neon signs.
The color and shape may vary depending on the model.
x
English
7
Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port properly.
VHF/UHF Antenna
Cable
or
Power Input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
Selecting a language
1
Selecting Store Demo
2
or Home Use
Selecting an antenna
Press the or button, then press the ENTER button. Select the desired OSD (On Screen Display) language.
Press the or button, then press the ENTER
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.
Press the or button, then press the ENTER
button.
button. Select Air, Cable or Auto.
ANT OUT
POWER
P
3
Selecting a channel
4
Setting the Clock
5
Mode
Viewing the HD
6
Connection Guide. Enjoy your TV.
Press the or button, then press the ENTER button. Select the channel source to memorize. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel Auto Program
Press the ENTER button at any time to interrupt the memorisation process.
Set the Clock Mode automatically or manually.
y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone. y Manual: Allows you to manually set the current date and time. y The connection method for the best HD screen quality is displayed.
Press the ENTER
button.
(p. 14).
(p. 19).
7
If You Want to Reset This Feature...
MENU Setup Plug & Play ENTER
English
8
Connections
Connecting to an AV Device
Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver
WR
Red White
HDMI IN 1(DVI), 2, PC/DVI AUDIO IN
When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD, Blu-ray
x
player, HD cable box, or HD STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.
Be sure to use an HDMI cable with a thickness of 14 mm or less.
x
The picture may not display normally (if at all) or the audio may not work if an external device that uses an older
x
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
B
e sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.
x
02 Connections
HDMI OUT
Device
DVI OUT
AUDIO OUT
R-AUDIO-L
Device
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: Digital Audio System, Amplifier, Home Theater
AUDIO OUT
R-AUDIO-L
WR R GB
RGB W R
COMPONENT OUT
PR
PB Y
W
Y
W
R
Red RedRedWhite BlueWhiteYellow Green
COMPONENT IN / AV IN: When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (green) will not
Y
Y
Device Device
VIDEO OUT
R
W
R
AUDIO OUT
R-AUDIO-L
match the video cable (yellow).
For better picture quality, the Component connection is recomended over the A/V connection.
If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port properly.
RGBWR
English
9
Connections
R-AUDIO-L
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analog) Cable or Headphone Connection
Available devices: Digital Audio System, Amplifier, DVD Home Theater
UN19C4000, UN22C4000
UN26C4000
Digital Audio System
OPTICAL
AUDIO IN
WR
Red White
DIGITAL AUDIO OUT (OPTICAL)
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
x
of both the TV and the system.
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver amplifier or DVD home theater is set to on, you can hear sound output from the TV’s optical
x
jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD home theater. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top­Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the amplifier or DVD home theater. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.
HEADPHONE : You can connect your headphones to the headphones output on your set. While the
headphones are connected, the sound from the built-in speakers will be disabled.
Sound function may be restricted when connecting headphones to the TV.
x
Headphone volume and TV volume are adjusted separately.
x
AUDIO OUT: Connects to the audio input jacks on your amplifier/home theater.
When connecting, use the appropriate connector.
x
When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
x
volume level with the amplifier’s volume control.
OPTICAL
Amplifier /
DVD home theater
Digital Audio System
10
English
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link
EX-LINK: Connector for service only.
Connecting to a PC
Using an HDMI/DVI cable or a D-sub cable
DVI OUT
AUDIO OUT
AUDIO OUT
PC OUT
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1360 x 768 @ 60 Hz.
Mode Resolution
IBM
MAC
VESA CVT
VESA DMT
VESA GTF 1280 x 720 52.500 70.000 89.040 -/+
640 x 350 720 x 400
640 x 480 832 x 624
720 x 576
1280 x 720
640 x 480 640 x 480 640 x 480 800 x 600 800 x 600
800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 720 1360 x 768
Horizontal Frequency
(KHz)
31.469
31.469
35.000
49.726
35.910
56.456
31.469
37.500
37.861
37.879
46.875
48.077
48.363
56.476
60.023
45.000
47.712
Vertical Frequency
(Hz)
70.086
70.087
66.667
74.551
59.950
74.777
59.940
75.000
72.809
60.317
75.000
72.188
60.004
70.069
75.029
60.000
60.015
Pixel Clock Frequency
(MHz)
25.175
28.322
30.240
57.284
32.750
95.750
25.175
31.500
31.500
40.000
49.500
50.000
65.000
75.000
78.750
74.250
85.500
02 Connections
Sync Polarity
(H / V)
+/-
-/+
-/-
-/-
-/+
-/+
-/-
-/-
-/­+/+ +/+ +/+
-/-
-/­+/+ +/+ +/+
NOTE
For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
x
The interlace mode is not supported.
x
The set might operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
x
English
11
Connections
HLIS
T
S
SOURCE
RE-CH
P
O
WER
SOURCE
Changing the Input Source
Source List
Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.
O
MENUm Input Source List
E
ENTER
■ TV / PC / AV / Component / HDMI1/DVI / HDMI2 / USB
You can only choose external devices that are connected to the TV. In the Source List, connected inputs will be highlighted.
In the Source List, PC is always activated.
Basic Features
How to Navigate Menus
Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.
MENU
1
2
3
1 MENU button: Displays the main on-screen menu. 2 ENTER
3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu.
E
select an item. Confirm the setting.
.
TOOL
RETURN
/ Direction button: Move the cursor and
AV.CH
INF
EXIT
EXIT
4
Edit Name
O
MENUm Input Edit Name ENTER
■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:
Name the device connected to the input jacks to make your input source selection easier.
When connecting an HDMI/DVI cable to the
HDMI IN 1(DVI) port, you should set the TV to DVI PC
or DVI Devices mode under Edit Name.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
MENU
m
1
/ Select an icon with the or
2
ENTER
E
3
/
4
/
5
ENTER
E
6
EXIT
e
The main menu options appear on the screen:
Picture, Sound, Channel, Setup, Input, Application, Support.
button. Press ENTERE to access the
sub-menu. Select the desired submenu with
the or button. Adjust the value of an item with the
or button. The adjustment in the OSD may differ depending on the selected menu.
Press ENTERE to confirm the selection.
Press EXIT.
E
7
12
English
Channel Menu
B
 Seeing Channels
Channel List
Add, delete or set Favorite nels and use the program guide for digital broadcasts.
MENU → Channel → Channel List
ENTER
Select a channel in the All Channels, Added Channels, Favorite or Programmed
screen by pressing the / and ENTER buttons. Then you can watch the selected channel.
Added Channels
6 Air 6-1 * TV #6
7 Air
8 Air 9 Air
9-1 * TV #9 10 Air
10-1 * TV #10 11-1 * TV #11
Air Antenna B Zoom Select Page
All Channels: Shows all currently available channels.
Added Channels: Shows all added channels.
Favorite: Shows all favorite channels.
Programmed: Shows all currently reserved
programs.
Using the color buttons with the Channel List
Red (Antenna): Switches to Air or Cable.
x
Green (Zoom): Enlarges or shrinks a channel
x
number.
Yellow (Select): Selects multiple channel lists.
x
Select desired channels and press the Yellow button to set all the selected channels at the same time. The
mark appears to the left of the selected channels.
(Page): Move to next or previous page.
x
(Tools): Displays the Channel List option menu.
x
(The options menus may differ depending on the situation.)
CH LIST

Tools
Channel Status Display Icons
Icons Operations
A channel selected.
A channel set as a Favorite.
A reserved Program.
Using Favorite Channels
MENU Channel Channel List ENTER
Add to Favorite / Delete from Favorite
Set channels you watch frequently as Favorites.
1. Select a channel and press the TOOLS button.
2. Add or delete a channel using the Add to Favorite or Delete from Favorite menu respectively.
Added Channels
To show all Favorite channels, click on the button shown on the right.
6 Air 6-1 * TV #6
7 Air
8 Air 9 Air
9-1 * TV #9 10 Air
10-1 * TV #10 11-1 * TV #11
Air Antenna B Zoom Select Page
Delete Add to Favorite
Timer Viewing Channel Name Edit Select All

Tools
FAV.CH
03 Basic Features
English
13
Basic Features
 Memorizing channels
MENU Channel ENTER
Antenna (Air / Cable)
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
Auto Program
Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna.
NOTE
When selecting the Cable TV system: STD, HRC
x
and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected.
After all the available channels are stored, it starts
x
to remove scrambled channels. The Auto program menu then reappears.
 Editing Channels
MENU Channel Channel List ENTER
Channel Name Edit
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Channel Name Edit
menu.
Channel Name Edit (analog channels only): Assign your
own channel name.
 Other Features
MENU Channel ENTER
How to Stop Searching Scrambled Channels
1. Press the ENTER
2. Press the button to select Yes.
3. Press the ENTER
This function is only available in Cable mode.
button to select Stop.
button.
Channel List
Channel List Option Menu
S
et each channel using the Channel List menu options
(Add / Delete, Timer Viewing, Select All / Deselect All). Option menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Add / Delete: Delete or add a channel to display the
channels you want.
NOTE
All deleted channels will be shown on the
x
All Channels menu. A gray-colored channel indicates the channel
x
has been deleted. The Add menu only appears for deleted
x
channels. Delete a channel from the Added Channels or
x
Favorite menu in the same manner.
Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the current time first to use this function.
1. Press the / / / buttons to select the
desired channel in Channel List.
2. Press the TOOLS button, then select
Timer Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote to enter the date and time.
If you selected Once, Every Week or Everyday in Repeat, you can enter the date you want.
4. Select OK, then press the ENTER
done.
button when
Clear Scrambled Channel
This function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.
English
14
NOTE
Only memorized channels can be reserved.
x
Reserved programs will be displayed in the
x
Programmed menu. When a digital channel is selected, press the
x
button to view the digital program.
Select All: Select all the channels in the channel list.
Deselect All: Deselect all the selected channels.
You can only select Deselect All when one or more channels are selected.
Programmed
(in Channel List) You can view, modify or delete a show you have reserved
to watch. Programmed timer viewing is displayed here. Highlight a program and press the TOOLS button to display Options.
Change Info: Change a show you have reserved to
watch. Begin with step 3 of “Timer Viewing,” above.
Cancel Schedules: Cancel a show you have reserved
to watch.
This deletes the highlighted or selected program(s).
Information: Display a show you have reserved
to watch. (You can also change the reservation Information.)
Alternatively, you can view Information by highlighting a program and pressing the
ENTER button.
Select All / Deselect All: Select or deselect all reserved
programs.
Picture Menu
 Changing the Preset Picture Mode
MENU Picture Mode ENTER
Mode
Select your preferred picture type.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal
environment.
Movie: Suitable for watching movies in a
dark room.
P.MODE
 Adjusting Picture Settings
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
MENU Picture ENTER
Your television has several setting options for picture quality control.
NOTE
When you make changes to Backlight, Contrast,
x
Brightness, Sharpness, Color or Tint (G/R) the OSD will be adjusted accordingly.
In PC mode, you can only make changes to
x
Backlight, Contrast and Brightness. Settings can be adjusted and stored for each
x
external device connected to the TV.
03 Basic Features
Fine Tune
(analog channels only) If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear.
Settings are applied to the channel your currently watching.
Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner.
To reset the fine-tuning, select Reset.
English
15
Basic Features
 Economical Solutions
The Eco Function can be used to enhance your power savings.
Eco Solution
MENU Picture Eco Solution ENTER
■ Energy Saving (Off / Low / Medium / High / Picture Off / Auto): This adjusts the brightness of the
TV in order to reduce power consumption. If you select Picture Off, the screen is turned off , but the sound remains on. Press any button to turn on the screen again.
No Signal Power Off (Off / 15 min. / 30 min. / 60 min.) To avoid unnecessary energy consumption, set how long you want the TV to remain on if it's not receiving a signal.
Disabled when the PC is in power saving mode.
 Changing the Picture Options
Advanced Settings
MENU Picture Advanced Settings ENTER
(Advanced Settings are available in Standard / Movie mode) Compared to previous models, new Samsung TVs have a
more precise picture.
In PC mode, you can only make changes to Dynamic Contrast, Gamma and White Balance.
Advanced Settings
Black Tone : Off ► Dynamic Contrast : Medium Shadow Detail : 0 Gamma : 0 RGB Only Mode : Off Color Space : Native White Balance
Move

Enter

Return
Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
Shadow Detail (-2~+2): Increase the brightness of dark
images.
Gamma: Adjust the primary color intensity.
RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green, and Blue color for making fine adjustments to the hue and saturation.
Color Space (Auto / Native / Custom): Adjust the range of colors available to create the image. To adjust Color, Red, Green, Blue and Reset, set Color Space
:
to Custom.
White Balance: Adjust the color temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's (red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red, green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
Flesh Tone: Emphasize pink “Flesh Tone.”
Edge Enhancement (Off / On): Emphasize object boundaries.
Picture Options
MENU Picture Picture Options ENTER
In PC mode, you can only make changes to the Color
Tone, Size, Digital Noise Filter and Auto Protection Time.
Picture Options
Color Tone : Normal ► Size : 16:9 Digital Noise Filter : Auto MPEG Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off Auto Protection Time : 2 hours
16
English
Move

Enter

Return
Color Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.
Settings can be adjusted and stored for each external device connected to an input on the TV.
Size: Your cable box/satellite receiver may
have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
16:9 : Sets the picture to 16:9 wide mode. Zoom1: Use for moderate magnification. Zoom2: Use for a stronger magnification. Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
Available with HD 1080i / 720p signal in 16:9 mode.
4:3 : Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and center of the screen may cause image retention(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
NOTE
After selecting Zoom1, Zoom2 or Wide Fit:
x
1. Press the button to select Position.
2. Press the ENTER
3. Press the or button to move the picture up
or down.
4. Press the ENTER
5. Press the button to select Reset.
6. Press the ENTER
to its default position.
After selecting Screen Fit in HDMI (1080i/1080p) or
x
Component (1080i/1080p) mode, you may need to center the picture:
1. Press the or button to select Position.
2. Press the ENTER
3. Press the , , or button to move the
picture.
4. Press the ENTER
5. Press the or button to select Reset.
6. Press the ENTER
button.
button.
button to reset the picture
button.
button.
button.
P.SIZE
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
x
720p (1280x720) Settings can be adjusted and stored for each
x
external device you have connected to an input on the TV.
Input Source Picture Size
ATV, AV, Component (480i, 480p) DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p) PC 16:9, 4:3
Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualization): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.
When the signal is weak, try other options until the best picture is displayed.
Auto Visualization: When changing analog channels, displays signal strength.
Only available for analog channels.
When bar is green, is that the best possible signal.
MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality.
HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth.
Available only in HDMI mode.
Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).
Auto Protection Time (2 hours / 4 hours / 8 hours / 10 hours / Off): Set the time the screen remains idle with a still image until the screen saver is activated. The screen saver prevents the formation of ghost images on the screen.
16:9, Zoom1, Zoom2, 4:3
16:9, 4:3, Wide Fit, Screen Fit
03 Basic Features
English
17
Basic Features
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
 Setting up the TV with Your PC
Set the input source to PC.
MENU Picture ENTER
Auto Adjustment
Adjust frequency values/positions and fine tune the settings automatically.
Not available when connecting with an HDMI/DVI cable.
Screen
Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine­tune again. After the noise has been reduced, readjust the picture so that it is aligned to the center of screen.
Position: Adjust the PC’s screen positioning if it does
not fit the TV screen. Press the or button to adjust the Vertical-Position. Press the or button to adjust the Horizontal-Position.
Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but the same basic set-up information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
y The correct size setting (resolution) [Optimum: 1360 x
768 pixels]
y If a vertical-frequency option exists on your display
settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.
Sound Menu
 Changing the Preset Sound Mode
MENU Sound Mode ENTER
Mode
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voices over other sounds.
Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.
S.MODE
 Adjusting Sound Settings
MENU Sound Equalizer ENTER
Equalizer
Adjusts the sound mode (standard sound mode only).
Balance L/R: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
Reset: Resets the equalizer to its default settings.
 Sound Settings
MENU Sound ENTER
Virtual Surround (Off / On)
(standard sound mode only) This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers using HRTF (Head Related Transfer Function) technology.
18
Dialog Clarity (Off / On)
(standard sound mode only) This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can be heard more clearly.
English
Preferred Language
(digital channels only) Digital-TV broadcasts are capable of
simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages).
You can only select a language among the ones being broadcasted.
MTS
Multi-Track Sound (MTS)
(analog channels only)
Mono: Choose for channels that are
broadcasting in mono or if you are having difficulty receiving a stereo signal.
Stereo: Choose for channels that are
broadcasting in stereo.
SAP: Choose to listen to the Separate Audio Program,
which is usually a foreign-language translation.
Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.
MTS
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital sound, reducing interference going to speakers and various digital devices such as an A/V Receiver/Home theater.
Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.
Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Setup Menu
 Setting the Time
MENU Setup Time ENTER
03 Basic Features
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night.
Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.
When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.
When Speaker Select is set to External Speaker
TV Speaker: Off, External Speaker: On
x
When Speaker Select is set to TV Speaker
TV Speaker: On, External Speaker: On
x
If there is no video signal, both speakers will be mute.
Time
Clock: Setting the clock is for using various timer
features of the TV.
The current time will appear every time you press the INFO button.
If you disconnect the power cord, you have to set the clock again.
Clock Mode (Auto / Manual)
Auto: Set the current time automatically using the
time from a digital channel.
The antenna must be connected in order to set the time automatically.
Manual: Set the current time manually.
Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.
English
19
Basic Features
Clock Set: Set Month, Day, Year, Hour, Minute and am/pm manually.
Available only when Clock Mode is set to Manual.
You can set the Month, Day, Year, Hour and Manual directly by pressing the number buttons on the remote control.
DST (Daylight Saving Time) (Off / On): Switches the Daylight Saving Time function on or off.
This function is only available when the
Clock Mode is set to Auto.
Time Zone: Select your time zone.
This function is only available when the
Clock Mode is set to Auto.
 Using the Sleep Timer
MENU Setup Time Sleep
Timer ENTER
Sleep Timer shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).
To cancel the Sleep Timer, select Off.
: Automatically
SLEEP
 Setting the On / Off Timer
MENU Setup Time Timer 1 ENTER
Timer 1 / Timer 2 / Timer 3: Three different on / off timer settings can be made. You must set the clock first.
Timer 1
On Time
Inactivate
Off Time
Inactivate
Volume
20 TV Cable 1
Repeat
Once
On Time / Off Time: Set the hour, minute, and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.)
Volume: Set the desired volume level.
00 00 am
00 00 am
Source Antenna Channel
Sun Mon Tue Wed Thu Fri Sat
Move
Adjust 
Enter

Return
Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select Air or Cable.
Channel (when the Source is set to TV): Select the
desired channel. Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files to be played when the TV is turned on automatically.
NOTE
If there is no music file on the USB device or the
x
folder containing a music file is not selected, the Timer function does not operate correctly.
When there is only one photo file in the USB,
x
the Slide Show will not play. If a folder name is too long, the folder cannot be
x
selected. Each USB you use is assigned its own folder.
x
When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to activate the timer.
The  mark indicates the day is selected.
Auto Power Off (available only when the TV is turned on by the Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.
 Locking Programs
MENU Setup Security ENTER
Security
The PIN input screen appears, Enter your 4 digit PIN number.
V-Chip: The V-Chip feature automatically locks out
programs that are deemed inappropriate for children. The user must enter a PIN (personal identification number) before any of the V-Chip restrictions are set up or changed.
NOTE
V-Chip is not available in HDMI, Component
x
or PC mode. The default PIN number of a new TV set is
x
“0-0-0-0”. Allow All: Press to unlock all TV ratings.
x
Block All: Press to lock all TV ratings.
x
20
English
V-Chip Lock (Off / On): You can block rated TV Programs.
TV Parental Guidelines: You can block TV programs depending on their rating. This function allows you to control what your children are watching.
TV-Y: Young children / TV-Y7: Children 7 and over /
TV-G: General audience / TV-PG: Parental guidance / TV-14: Viewers 14 and over / TV-MA: Mature audience
ALL: Lock all TV ratings. / FV: Fantasy violence / V:
Violence / S: Sexual situation / L: Adult Language / D: Sexually Suggestive Dialog
The V-Chip will automatically block certain categories dealing with more sensitive material. For example, if you block the TV-Y category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the young adult group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work similarly. So, if you block the L sub-rating in TV-PG, then the L sub-ratings in TV-14 and TV-MA will automatically be blocked.
MPAA Rating: You can block movies depending on their MPAA rating. The Motion Picture Association of America(MPAA) has implemented a rating system that provides parents or guardians with advanced information on which films are appropriate for children.
G: General audience (no restrictions). / PG: Parental
guidance suggested. / PG-13: Parents strongly cautioned. / R: Restricted. Children under 17 should be accompanied by an adult. / NC-17: No children under age 17. / X: Adults only. / NR: Not rated.
The V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the PG-13 category, then R, NC-17 and X will automatically be blocked.
Canadian English: You can block TV programs depending on their Anglophone Canadian ratings.
C: Programming intended for children under age 8. /
C8+: Programming generally considered acceptable for children 8 years and over to watch on their own. / G: General programming, suitable for all audiences. / PG: Parental Guidance. / 14+: Programming contains themes or content which may not be suitable for viewers under the age of 14. / 18+: Adult programming.
The V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the G category, then
PG, 14+ and 18+ will automatically be blocked.
Canadian French: You can block TV programs
depending on their French Canadian rating.
G: General / 8 ans+: Programming generally
considered acceptable for children 8 years and over to watch on their own. / 13 ans+: Programming may not be suitable for children under the age of 13. / 16 ans+: Programming is not suitable for children under the age of 16. / 18 ans+: Programming restricted to adults.
The V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the 8 ans+ category, then 13 ans+, 16 ans+ and 18 ans+ will automatically be blocked also.
Downloadable U.S. Rating: Parental restriction information can be used while watching DTV channels.
NOTE
If information is not downloaded from the
x
broadcasting station, the Downloadable U.S. Rating menu is deactivated.
Parental restriction information is automatically
x
downloaded while watching DTV channels. It may take several seconds.
The Downloadable U.S. Rating menu
x
is available for use after information is downloaded from the broadcasting station. However, depending on the information from the broadcasting station, it may not be available for use.
Parental restriction levels differ depending on
x
the broadcasting station. The default menu name and Downloadable US Rating change depending on the downloaded information.
Even if you set the on-screen display to another
x
language, the Downloadable U.S. Rating menu will appear in English only.
The rating will automatically block certain
x
categories that deal with more sensitive material.
The rating titles (For example: Humor Level..etc)
x
and TV ratings (For example: DH, MH, H..etc) may differ depending on the broadcasting station.
Change PIN: The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the Confirm New PIN screen appears. Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been memorized.
03 Basic Features
English
21
Basic Features
How to watch a restricted channel
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear:
This channel is blocked by V-Chip. Please enter the PIN to unblock.
If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to ‘0-0­0-0:’ POWER (off) MUTE 8 2 4 POWER (on)
¦ Other Features
O
MENUm Setup ENTER
E
Menu Language
Set the menu language.
1. Select Menu Language and press the ENTER
button.
2. Choose desired language and press the ENTER
button.
Choose between English, Español and Français.
E
E
Caption
(On-Screen Text Messages)
Caption (Off / On): You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.
The Caption feature doesn’t work in Component, HDMI or PC modes.
Caption Mode: You can select the desired caption mode.
The availability of captions depends on the program being broadcast.
Default / CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channels only) The Digital Captions
function works with digital channels.
Service1~6 may not be available in digital caption mode depending on the broadcast.
Digital Caption Options: (digital channels only) Size: Options include Default, Small, Standard and
Large. The default is Standard. Font Style: Options include Default and Styles 0 to 7.
The default is Style 0.
CC
Foreground Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letter. The default is White.
Background Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the caption. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing.
Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent, Translucent, Solid and Flashing.
Return to Default: This option sets each Size, Font Style, Foreground Color, Background Color, Foreground Opacity and Background Opacity to its default.
NOTE
Digital Caption Options are available only
x
when Default and Service1 ~ Service6 can be selected in Caption Mode.
The availability of captions depends on the
x
program being broadcasted. The Default setting follows the standards set by
x
the broadcaster. The Foreground and Background cannot be set
x
to have the same color. You cannot set both the Foreground Opacity
x
and the Background Opacity to Transparent.
General
Game Mode (Off / On): When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game mode.
NOTE
Precautions and limitations for game mode
x
– To disconnect the game console and connect
another external device, set Game Mode to Off in the setup menu.
– If you display the TV menu in Game Mode, the
screen shakes slightly.
Game Mode is not available when the input source
x
is set to TV or PC. After connecting the game console, set Game Mode
x
to On. Unfortunately, you may notice reduced picture quality.
If Game Mode is On:
x
Picture mode is set to Standard and Sound mode
is set to Movie.
Equalizer is not available.
22
English
Basic Features
Basic Features
Menu Transparency (Bright / Dark): Set the Transparency of the menu.
Melody (Off / Low / Medium / High): Set so that a melody plays when the TV is turned on or off.
Picture In Picture (PIP)
PIP
You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode.
MENU Setup PIP ENTER
NOTE
For PIP sound, refer to the Sound Select
x
instructions. If you turn the TV off while watching in PIP mode, the
x
PIP window will disappear. You may notice that the picture in the PIP window
x
becomes slightly unnatural when you use the main screen to view a game or karaoke.
While V-Chip is in operation, the PIP function cannot
x
be used. PIP Settings
x
Main picture Sub picture Component, HDMI1/DVI,
HDMI2, HDMI3, HDMI4, PCTV
PIP (Off / On): Activate or deactivate the PIP function.
Air/Cable (Air / Cable): Select either Air or Cable as the input source for the sub-screen.
Channel: Select the channel for the sub-screen.
Size (
/ ): Select a size for the sub-picture.
Position ( sub-picture.
Sound Select (Main / Sub): You can choose the desired sound (Main / Sub) in PIP mode.
/  /  / ): Select a position for the
Support Menu
MENU Support ENTER
Self Diagnosis
Self Diagnostic might take few seconds, this is part of the normal operation of the TV.
Picture Test: Use to check for picture problems. Yes: If the test pattern does not appear or there is
noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG).
No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.
Sound Test: Use the built-in melody sound to check for sound problems.
If you hear no sound from the TV’s speakers, before performing the sound test, make sure
Speaker Select is set to TV Speaker in the Sound menu.
The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.
Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG).
No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.
Signal Information: (Digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.
Troubleshooting: If the TV seems to have a problem, refer to this description.
If none of these troubleshooting tips apply, contact the Samsung customer service center.
03 Basic Features
English
23
Basic Features
Software Upgrade
Software Upgrade can be performed downloading the
latest firmware from "www.samsung.com" to a USB memory device.
Current Version - the software already installed in the TV.
Software is represented as "Year/Month/Day_Version".
Software Upgrade
Current Version 2010/01/18_000001
By USB
Alternative Software ----/--/--_-----
Move

Enter

Return
Installing the Latest Version
By USB: Insert a USB
drive containing the firmware upgrade file, downloaded from “www. samsung.com,” into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to to write down your settings so that you can easily reset them after the upgrade.
Alternative Software (Not available)
TV Side Panel
USB Drive
HD Connection Guide
Refer to this information when connecting external devices to the TV.
Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software.
24
English
Advanced Features
SUM
Media Play
04 Advanced Features
MediaPlay
Videos
Change Device
View Devices
MEDIA.P
Enjoy photos, music and/or movie fi les saved on a USB Mass Storage Class (MSC) device.
MENU Application Media Play
(USB) ENTER
 Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie fi les to the USB
(HDD) port on the back or side panel of the TV.
3. When USB is connected to the TV, popup window appears. Then you can select Media Play.
It might not work properly with unlicensed multimedia files.
Need-to-Know List before using Media Play (USB)
MTP (Media Transfer Protocol) is not supported.
x
The file system supports FAT16, FAT32 and NTFS.
x
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
x
Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
x
Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port.
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
x
SAMSUNG is not responsible for any data file damage or data loss. Connect a USB HDD to the dedicated port, USB (HDD) port.
x
Do not disconnect the USB device while it is loading.
x
The higher the resolution of the image, the longer it takes to display on the screen.
x
The maximum supported JPEG resolution is 15360X8640 pixels.
x
For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
x
If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.
x
MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management
x
(DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.
If more than 2 PTP devices are connected, you can only use one at a time.
x
If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high
x
power (more than 500mA or 5V) may not be supported. If an over-power warning message is displayed while you are connecting or using a USB device, the device may not
x
be recognized or may malfunction. If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.
x
The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
x
If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
x
If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
x
not played, connect the USB device to the PC, format the device and check the connection. If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC
x
to permanently delete the file.
TV Rear Panel

Enter
USB Drive
English

Return
25
Advanced Features
Movie 01.avi
00:04:03 / 00:07:38 1/1
SUM
B
¦ Screen Display
Move to the desired file using the up/down/right/left buttons and then press the ENTERE or  (Play) button. The file is played.
Supports the View Devices and Home in Media Play homepage.
You can ascertain the selected
Information:
file name and the number of files
and page.
Sort List Section:
Displays the sorting standard.
The sorting standard is
different depending on the contents.
Videos
SUM
Change Device
/Movie 01.avi 1/1
Movie 01.avi
Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 09.avi
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
Select Sorting
Operation Buttons
Red (Change Device): Selects a connected device. Green (Preference): Sets the file preference. (not supported in Basic view) Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol. Blue (Sorting): Selects the sort list.
T
Tools: Displays the option menu.
Using the  (REW) or µ (FF) button, file list can move to next or previous page.
Videos
Playing Video
1. Press the or button to select Videos, then press the ENTER
2. Press the /// button to select the desired video in the file list.
3. Press the ENTER
E
button or  (Play) button.
– The selected file is displayed on the top with its playing time. – If video time information is unknown, play time and progress bar are not displayed. – During video playback, you can search using the and button.
In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself.
y Supported Subtitle Formats
Name File extension Format
MPEG-4 time-based text .ttxt XML
SAMI .smi HTML
SubRip .srt string-based SubViewer .sub string-based Micro DVD .sub or .txt string-based
E
button in the Media Play menu.
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
T
Tools
Page
File List Section: You can confirm the files and groups that are sorted by category.
E
Pause
L
Jump
T
Tools
R
Return
English
26
Loading...
+ 59 hidden pages