Samsung BN68-02620B-06 User Manual

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comuníquese con SAMSUNG WORLDWIDE
Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de atención al cliente de SAMSUNG.
Country Customer Care Center
CANADA 1-800-SAMSUNG(726-7864) www.samsung.com
U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com
Web Site Address
Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc., Service à la Clientèle 55 Standish Court Mississauga, Ontario L5R 4B2 Canada
Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660-2112
LCD TV
user manual
BN68-02620B-06
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register
Model Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
See the warranty card for more information on warranty terms.
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full­motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.
SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT• Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
In the United States : 1-800-SAMSUNG (1-800-726-7864) – In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LCD screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:
Avoid displaying the same TV channel for long periods.• Always try to display any image on full screen, use TV set picture format menu for best possible match.• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout •
process. Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.•
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
x
The appearance may differ depending on the product.
Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand. Installation with a wall-mount.
4inches
4inches
4inches
4inches
4inches
4inches
4inches
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
English
2
3
Contents
English
MEDIA.P
P
POWER
ENGLISH
Getting Started
List of Features y ......................................................... 4
Accessories y .............................................................. 4
Installing the LCD TV Stand y ...................................... 4
Viewing the Control Panel y ......................................... 5
Viewing the Remote Control y ...................................... 6
Connecting to an Antenna y ........................................7
Plug & Play (Initial Setup) y ........................................... 7
Connections
Connecting to an AV Device y ......................................8
Connecting to an Audio Device y ................................. 9
Connecting to a PC y ..................................................9
Changing the Input source y ...................................... 10
Basic Features
How to Navigate Menus y .......................................... 11
Channel Menu y ........................................................ 11
Seeing Channels 11 Using Favorite Channels 12 Memorizing channels 12 Editing channels 12 Other Features 12
Picture Menu y .......................................................... 13
Changing the Preset Picture Mode 13 Adjusting picture settings 13 Setting up the TV with your PC 14 Changing the Picture Options 14
Sound Menu y ........................................................... 16
Changing the Preset Sound Mode 16 Adjusting sound settings 16 Sound Settings 16
Setup Menu y ............................................................ 17
Setting the Time 17 Using the Sleep Timer 17 Setting the On/Off Timer 17 Locking Programs 18 Other Features 19
Support Menu y ......................................................... 20
Advanced Features
Media Play y .............................................................. 21
Connecting a USB Device 21
Other Information
Installing the Wall Mount y .........................................25
Securing the TV to the Wall (LN32C350 Only) y .........26
Securing the TV to the Wall y ..................................... 27
Anti-theft Kensington Lock y ...................................... 27
Troubleshooting y ......................................................28
Storage and Maintenance 30
Specifications y ......................................................... 31
License 31
Dimensions y ............................................................. 32
Index y ...................................................................... 33
Check the Symbol!
t
This function can be used by pressing the
TOOLS button on the remote control.
Note :
Important information
O
Step by step guide :
Informs you how to access
the menu.
Getting Started
List of Features
Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed y without a cable box / STB (Set-Top-Box) satellite receiver.
Media Play y : Allows you to play music files, and pictures saved on a USB device. (P. 21) Self Diagnosis y : You can check picture and sound operation. (P. 20)
Accessories
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
The items' colors and shapes may vary depending on the models.
Remote Control (BN59-01006A) & Batteries (AAA x 2) y Owner’s Instructions y Warranty Card / Safety Guide / Quick Setup Guide y
Installing the LCD TV Stand
Components
When installing the stand, use the provided components and parts.
A B
1 EA
Stand y Screws y
1
2
Cleaning Cloth (BN63-01798B) y
3EA (M4 X L16)
Front
A
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
Make sure that at least two persons lift and move the LCD TV.
Lay the product down, with the screen facing up and fasten the screws.
English
4
B
Rear
5
01 Getting Started
English
Viewing the Control Panel
The product color and shape may vary depending on the model.
Speakers
Power IndicatorRemote control sensor
P
(Power)
Remote control sensor Aim the remote control towards this spot on the TV.
SOURCE
MENU
y
z
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
E
Turns the TV on or off.
Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.
Displays an on-screen menu, the OSD (on screen display), of your TV’s features.
Adjusts the volume. In the OSD, use the and buttons on the remote control.
Changes the channels. In the OSD, use the and buttons on the remote control.
y
z
buttons as you would use the
buttons as you would use the
Getting Started
MEDIA.P
A BCD
Viewing the Remote Control
Turns the TV on and off.
Press to directly access to channels.
Press to select additional channels
(digital) being broadcast by the same
station. For example, to select channel
‘54-3’, press ‘54’, then press ‘-’ and ‘3’.
Adjusts the volume.
Displays the channel list on the screen. (P. 11)
View the Media Play. (P. 21)
Quickly select frequently used functions.
Select on-screen menu items and
change menu values.
Return to the previous menu.
Buttons used in the Channel list, Media
Play menu, etc.
Display and select the available video sources. (P. 10)
Return to the previous channel.
Cut off the sound temporarily.
Change channels.
Displays the main on-screen menu.
Displays Favorite Channel Lists on the screen. (P. 12)
Press to display information on the TV screen. (P. 17)
Exit the menu.
MTS: Press to choose stereo, mono
or Separate Audio Program (SAP broadcast). (P. 16)
P.SIZE: Picture size selection. (P. 15) CC: Controls the caption decoder.
(P. 19)
Installing batteries (Battery size: AAA)
English
6
NOTE
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the remote
x
control. Avoid use when nearby fluorescent lights or neon signs.
The color and shape may vary depending on the model.
x
7
01 Getting Started
English
Connecting to an Antenna
P
POWER
CHLIST
INFO
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
VHF/UHF Antenna
or
Power Input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the red button.
Selecting a language
1
Selecting Store Demo
2
or Home Use
Selecting an antenna
3
Selecting a channel The channel search will start automatically.
4
Setting the Clock
5
Mode
Viewing the HD Connection Guide.
6
Enjoy your TV.
Press the or button, then press the ENTERE button. Select the desired OSD (On Screen Display) language.
Press the or button, then press the ENTERE button.
Select the y Home Use mode. Store Demo Mode is for retail environments.
To return the unit’s settings from y Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume in the OSD, press and hold MENU for 5 sec.
Press the or button, then press the ENTERE button. Select Air, Cable or Auto.
In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the , ▼, or button, then press the ENTERE button.
For more information, refer to Channel Auto Program. (P. 12)
Press the ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
If you select the Auto, set the daylight saving time. Select the time zone where you live.
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
Cable
ANT OUT
7
If You Want to Reset This Feature...
MENU
O m
Setup Plug & Play ENTER
E
Setup
Plug & Play
Language : English Time
Game Mode : Off
V-Chip Caption Melody : Medium
Connections
W W
BGRRWY
W W
BGRR
W
R
R-AUDIO-L
P
R PB Y
P
R PB Y
R-AUDIO-L
P
R PB Y
R-AUDIO-L
P
R PB Y
WY
W Y
BGR
W
W
B
G
R
R
R
R
R
Connections
Connecting to an AV Device
Using an HDMI / DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable box, HD satellite receiver (STB).
Device
Red White
HDMI IN 1(DVI), 2 / PC/DVI AUDIO IN
When using an HDMI/DVI cable connection, you must use the xHDMI IN 1(DVI) jack for video. A DVD, Blu-ray player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.
The picture may not display normally (if at all) or the audio may not work if an external device that uses an older
x
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may
x
occur.
Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
DVI OUT
AUDIO OUT
BD/DVD player/
HD cable/sat box
HDMI OUT
VIDEO OUT
8
English
AUDIO OUT
When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
For better picture quality, the
Component connection is recommended over the A/V connection.
COMPONENT OUT
AUDIO OUT
VCR
Blu-ray player
Yellow Red White Red Blue Green
9
English
02 Connections
Connecting to an Audio Device
W
R
R-AUDIO-L
P
R PB Y
W W
BGRR
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, Home Theater
AUDIO IN
DVD
Home Theater
Digital audio system
OPTICAL
Red White
DIGITAL AUDIO OUT (OPTICAL)
When a Digital Audio System is connected to the xDIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the
x
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.
AUDIO OUT : Connects to the audio input jacks on your amplifier/home theater.
When connecting, use the appropriate connector (sold separately).
x
When an audio amplifier is connected to the xAUDIO OUT jacks: Decrease the volume of the TV and adjust the volume level with the amplifier’s volume control.
Connecting to a PC
Using an HDMI/DVI Cable / a D-sub Cable
PC OUT
AUDIO OUT
AUDIO OUT
DVI OUT
Basic Features
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1360x768@60Hz.
Mode Resolution
IBM
MAC
VESA DMT
VESA CVT
VESA GTF 1280 x 720 52.500 70.000 89.040 - / +
NOTE
For HDMI/DVI cable connection, you must use the xHDMI IN 1(DVI) jack. The interlace mode is not supported.
x
The set might operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
x
Input Cables (Sold Separately)
640 x 350 31.469 70.086 25.175 + / -
720 x 400 31.469 70.087 28.322 - / +
640 x 480 35.000 66.667 30.240 - / -
832 x 624 49.726 74.551 57.284 - / -
640 x 480
800 x 600
1024 x 768
1280 x 720
1360 x 768 47.712 60.015 85.500 + / +
720 x 576 35.910 59.950 32.750 - / +
1280 x 720 56.456 74.777 95.750 - / +
Horizontal Frequency
(KHz)
31.469 59.940 25.175 - / -
37.861 72.809 31.500 - / -
37.500 75.000 31.500 - / -
37.879 60.317 40.000 + / +
48.077 72.188 50.000 + / +
46.875 75.000 49.500 + / +
48.363 60.004 65.000 - / -
56.476 70.069 75.000 - / -
60.023 75.029 78.750 + / +
45.000 60.000 74.250 + / +
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA
Changing the Input source
Source List
MENU
O m
Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.
TV / AV / Component / PC / HDMI1/DVI / HDMI2
10
Input Source List ENTER
You can only choose external
devices that are connected to the TV. In the Source List, connected inputs will be highlighted.
PC always stay activated.
English
E
Edit Name
MENU
O m
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray / HD DVD / DMA: Name the
device connected to the input jacks to make your input source selection easier.
When connecting an HDMI/DVI cable to the HDMI IN
1(DVI) port, you should set to DVI PC or DVI mode
under Edit Name.
Input Edit Name ENTER
E
11
English
03 Basic Features
Basic Features
MEDIA.P
How to Navigate Menus
Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.
Channel Menu
Seeing Channels ¦
1
2
3
1 MENU button: Displays the main on-screen menu. 2 ENTERE / Direction button: Move the cursor and
select an item. Confirm the setting.
3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
MENU
m
1
▲ / ▼ Select an icon with the or
2
ENTER
3
▲ / ▼
4
◄ / ►
5
ENTER
6
EXIT
e
The main menu options appear on the screen:
Picture, Sound, Channel, Setup, Input, Application, Support.
button.
E
Press ENTERE to access the sub-menu.
Select the desired submenu with the or button.
Adjust the value of an item with the or button. The adjustment in the OSD may differ depending on the selected menu.
E
Press ENTERE to confirm the selection. Press EXIT.
4
7
Channel List
MENU
O m
Add, delete or set Favorite channels and use the program guide for digital broadcasts.
Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the / buttons, and pressing the ENTERE button. Then you can watch the selected channel.
Added Channels
Air
All Channels: Shows all currently available
Added Channels: Shows all added channels.
*
Favorite: Shows all favorite channels.
Programmed: Shows all currently reserved
Using the color buttons with the Channel List
x
x
Channel Status Display Icons
Channel Channel List ENTER
6 Air
6-1 ♥ TV #6
7-1 ♥ TV #7
8 Air 9 Air
9-1 ♥ TV #9
10 Air
10-1 ♥ TV #10 11-1 ♥ TV #11
B
C
Zoom
Select T Tools ► Next Program
channels.
programs.
Green (Zoom): Enlarges or shrinks a channel
number.
Yellow (Select): Selects multiple channel lists.
You can perform the add/delete or add to Favorite/ delete from Favorite function for multiple channels at the same time. Select desired channels and press the Yellow button to set all the selected channels at the same time. The c mark appears to the left of the selected channels.
T x (Tools): Displays the Channel List option menu.
(The Options menus may differ depending on the situation.)
E
Icons Operations
A channel selected.
c
A channel set as a Favorite.
*
A reserved Program.
)
A program currently being broadcast.
(
Basic Features
MEDIA.P
P
POWER
Using Favorite Channels ¦
MENU
O m
*
Add to Favorite / Delete from Favorite
Set channels you watch frequently as Favorites.
1. Select a channel and press the TOOLS
button.
2. Add or delete a channel using the Add to Favorite or Delete from Favorite menu
respectively.
Added Channels
Air
Channel Channel List ENTER
t
6 Air
6-1 ♥ TV #6
7-1 ♥ TV #7
8 Air 9 Air
9-1 ♥ TV #9
10 Air
10-1 ♥ TV #10 11-1 ♥ TV #11
B
C
Zoom
Delete Add to Favorite Timer Viewing Select All Auto Program
Select T Tools ► Next Program
E
Memorizing channels ¦
MENU
O m
Antenna (Air / Cable)
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
Channel ENTER
t
E
Auto Program
Air : Air antenna signal. Cable : Cable antenna signal. Auto : Air and Cable antenna.
NOTE
When selecting the Cable TV system: Selects the
x
cable system. STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected.
After all the available channels are stored, it starts
x
to remove scrambled channels. The Auto program menu then reappears.
English
12
How to Stop Auto Programming
1. Press the ENTERE button.
2. A message will ask Stop Auto Program? Select Yes by
pressing the or button.
3. Press the ENTERE button.
Editing channels ¦
MENU
O m
Channel Name Edit
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Channel Name Edit
menu. Channel Name Edit (analog channels only): Assign your
own channel name.
Channel Channel List ENTER
t
E
Other Features ¦
MENU
O m
Channel ENTER
E
Clear Scrambled Channel
This function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.
How to Stop Searching Scrambled Channels
1. Press the ENTERE button to select Stop.
2. Press the button to select Yes.
3. Press the ENTERE button.
This function is only available in Cable mode.
Channel List
MENU
O m
Channel List Option Menu
Set each channel using the Channel List menu options (Add/ Delete, Timer Viewing, Select All/ Deselect All). Option
menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Add / Delete : Delete or add a channel to display the channels you want.
Channel Channel List ENTER
t
NOTE
All deleted channels will be shown on the xAll Channels menu.
A gray-colored channel indicates the channel
x
has been deleted. The xAdd menu only appears for deleted
channels. Delete a channel from the xAdded Channels or
Favorite menu in the same manner.
E
13
English
03 Basic Features
Timer Viewing : You can set a desired channel to be displayed automatically at the set time; even when you are watching another channel. Set the current time first to use this function.(P. 17)
1. Press the / / / buttons to select the
desired channel in Channel List.
2. Press the TOOLS button, then select Timer Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote for entering the date and time.
If you selected Once, Every Week or Every Day in Repeat, you can enter the date you want.
4.
Select OK, then press the ENTERE button when done.
NOTE
Only memorized channels can be reserved.
x
Reserved programs will be displayed in the
x
Programmed menu. When a digital channel is selected, press the
x
button to view the digital program.
Select All : Select all the channels in the channel list. Deselect All : Deselect all the selected channels.
You can only select Deselect All when one or more channels are selected.
Programmed
(in Channel List) You can view, modify or delete a show you have reserved to
watch.
1. Press the
2. Press the and button move to the Programmed
menu.
Change Info : Change a show you have reserved to watch. Cancel Schedules : Cancel a show you have reserved
to watch. Information : Display a show you have reserved
to watch. (You can also change the reservation Information.)
Select All / Deselect All : You can select or deselect all channels in the channel list.
ENTERE
button to select Channel List.
Picture Menu
Changing the Preset Picture Mode ¦
MENU
O m
Mode
Select your preferred picture type.
Dynamic : Suitable for a bright room. Standard : Suitable for a normal environment. Movie : Suitable for watching movies in a dark room.
Picture Mode ENTER
t
E
Adjusting picture settings ¦
MENU
O m
Picture Backlight ENTER
E
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality control.
NOTE
When you make changes to xBacklight, Contrast, Brightness, Sharpness, Color or Tint (G/R) the OSD will be adjusted accordingly.
In PC mode, you can only make changes to
x
Backlight, Contrast and Brightness. Settings can be adjusted and stored for each
x
external device connected to the TV. Lowering picture brightness reduces power
x
consumption.
Fine Tune
(analog channels only) If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually.
Select y Fine Tune in the Channel menu. Fine tuned channels that have been saved are marked
with an asterisk “*” on the right-hand side of the channel number in the channel banner.
To reset the fine-tuning, select Reset.
Basic Features
Setting up the TV with your PC ¦
Set the input source to PC.
Auto Adjustment
MENU
O m
ENTER
Adjust frequency values/positions and fine tune the settings automatically.
Not available when connecting through HDMI/DVI
cable.
Picture Auto Adjustment
E
t
Screen
Coarse / Fine : Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine­tune again. After the noise has been reduced, readjust the picture so that it is aligned to the center of screen.
Position : Adjust the PC’s screen positioning if it does not fit the TV screen. Press the or button to adjust the Vertical-Position. Press the or button to adjust the Horizontal-Position.
Image Reset : Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but the same basic set-up information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution) y [Optimum: 1360X768 pixels]
If a vertical-frequency option exists on your display y settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.
Changing the Picture Options ¦
Advanced Settings
MENU
O m
ENTER
(available in Standard / Movie mode) Compared to previous models, new Samsung TVs have a
more precise picture.
In PC mode, you can only make changes to Gamma and White Balance.
Black Tone : Off
Dynamic Contrast : Medium Gamma : 0 Color Space : Native White Balance Flesh Tone : 0 Edge Enhancement : On
Black Tone (Off / Dark / Darker / Darkest) : Select the black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High) : Adjust the screen contrast.
Gamma : Adjust the primary color intensity. Color Space (Auto / Native) : Adjust the range of colors
available to create the image. White Balance : Adjust the color temperature for a more
natural picture. R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness. R-Gain / G-Gain / B-Gain : Adjust each color's (red,
green, blue) brightness. Reset: Resets the White Balance to it's default
settings.
Flesh Tone : Emphasize pink "flesh tone". Edge Enhancement (Off / On) : Emphasize object
boundaries.
Picture Advanced Settings
E
Advanced Settings
U Move E Enter R Return
14
English
15
English
03 Basic Features
Picture Options
MENU
O m
ENTER
In PC mode, you can only make changes to the Color Ton e and Size.
Color Tone : Normal
Size : 16:9 Digital Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off
Color Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic. Settings can be adjusted and stored for each external
device connected to an input on the TV. Size : Your cable box/satellite receiver
may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification. Zoom2: Use for a stronger magnification. Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input.
NOTE
After selecting xZoom1, Zoom2 or Wide Fit:
1. Press the button to select Position.
2. Press the ENTERE button.
3. Press the or button to move the picture up
4. Press the ENTERE button.
5. Press the button to select Reset.
6. Press the ENTERE button to reset the picture
Picture Picture Options
E
Picture Options
U Move E Enter R Return
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which are not covered by the warranty.
or down.
to its default position.
After selecting xScreen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you may need to center the picture:
1. Press the or button to select Position.
2. Press the ENTERE button.
3. Press the ▲, ▼, ◄ or button to move the
picture.
4. Press the ENTERE button.
5. Press the or button to select Reset.
6. Press the ENTERE button.
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
x
720p (1280x720) Settings can be adjusted and stored for each
x
external device you have connected to an input on the TV.
Input Source Picture Size
ATV, AV, Component (480i, 480p) DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p) PC
Digital Noise Filter (Off / Low / Medium / High / Auto): If the broadcast signal received by your TV is
weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.
When the signal is weak, try other options until the
best picture is displayed.
HDMI Black Level (Normal / Low) : Selects the black level on the screen to adjust the screen depth.
Available only in HDMI mode (RGB signals).
Film Mode (Off / Auto) : Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
16:9, Zoom1, Zoom2, 4:3
16:9, 4:3, Wide Fit, Screen Fit
16:9, 4:3
Picture Reset (Reset Picture Mode / Cancel)
Reset all picture settings to the default values.
Reset Picture Mode : Returns all picture values in the currently selected mode to the default settings.
Basic Features
Sound Menu
Changing the Preset Sound Mode ¦
MENU
O m
Mode
Standard : Selects the normal sound mode. Music : Emphasizes music over voices. Movie : Provides the best sound for movies. Clear Voice : Emphasizes voices over other sounds. Custom : Recalls your customized sound settings.
Sound Mode ENTER
t
E
Adjusting sound settings ¦
MENU
O m
Sound Equalizer ENTER
E
Equalizer
Adjusts the sound mode.
Mode : Selects the sound mode among the predefined settings.
Balance L/R : Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
Reset : Resets the equalizer to its default settings.
Sound Settings ¦
SRS TruSurround HD (Off / On)
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.
Preferred Language
(digital channels only) Digital-TV broadcasts are capable of
simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages).
You can only select a language among the ones being
broadcasted.
Multi-Track Sound (MTS)
(analog channels only)
Mono : Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
Stereo : Choose for channels that are broadcasting in stereo.
SAP : Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAP.
Auto Volume (On/Off)
Because each broadcasting station has its own signal conditions, the volume may fluctuate each time channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.
When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.
When Speaker Select is set to External Speaker, you should use these settings.
TV speaker: Off, External speaker: On
x
When Speaker Select is set to TV Speaker, you should use these settings.
TV speaker: On, External speaker: On
x
If there is no video signal, both speakers will be mute.
Sound Reset (Reset All / Reset Sound Mode / Cancel)
Reset All : Resets all sound settings to the factory
defaults. Reset Sound Mode : Returns all sound values in the
currently selected mode to the default settings.
16
English
17
English
03 Basic Features
Setting the Time ¦
MENU
O m
Setup Menu
Setup Time ENTER
E
Setting the On/Off Timer ¦
MENU
O m
ENTER
Timer 1 / Timer 2 / Timer 3 : Three different on / off
timer settings can be made. You must set the clock first.
Setup Time Timer 1
E
Time
The current time will appear every time you press the
INFO button.
Clock : Setting the clock is for using various timer
features of the TV.
If you disconnect the power cord, you have to set
the clock again.
Clock Mode: Set up the current time manually or automatically.
Auto : Set the current time automatically using the time from a digital channel.
The antenna must be connected in order to set
the time automatically.
Manual : Set the current time manually.
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
Available only when Clock Mode is set to Manual.
You can set the month, day, year, hour and minute
directly by pressing the number buttons on the remote control.
DST (Off / On / Auto): Switches the DST(Daylight Saving Time) function on or off.
This function is only available when the Clock
Mode is set to Auto.
Time Zone: Select your time zone.
This function is only available when the Clock Mode is set to Auto.
Using the Sleep Timer ¦
On Time
Timer 1
12 00 am Inactivate
Off Time
12 00 am Inactivate
Volume Contents
10 TV Air 3
Repeat
Once
On Time / Off Time: Set the hour, minute, am/pm and activate / inactivate. (To activate the timer with the setting you have chosen, set to Activate.)
Volume: Set the desired volume level. Contents: When the On Time is activated, you can turn
on a specific channel or play back contents such as photo or audio files.
TV/USB : Select TV or USB. (Make sure that an USB device is connected to your TV.)
Antenna : Select Air or Cable. Channel : Select the desired channel. Music : Select the folder containing MP3 files on the
USB device. Photo : Select the folder containing JPEG files on the
USB device.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to activate the timer.
The
c
Auto Power Off (available only when the TV is turned
on by the Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.
Sun Mon Tue Wed Thu Fri Sat
L Move U Adjust E Enter R Return
mark indicates the day is selected.
MENU
O m
ENTER
Sleep Timer
after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).
Setup Time Sleep Timer
E
t
To cancel the Sleep Timer, select Off.
: Automatically shuts off the TV
Basic Features
Locking Programs ¦
MENU
O m
Setup V-Chip ENTER
E
V-Chip
The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN
(personal ID number) before any of the V-Chip restrictions are set up or changed.
NOTE
V-Chip x function is not available in HDMI, Component or PC mode.
The default PIN number of a new TV set is "0-0-0-0"
x
Allow all x: Press to unlock all TV ratings. Block all x: Press to lock all TV ratings.
Change PIN : The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the Confirm New PIN screen appears. Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been memorized.
If you forget the PIN, press the remote-control
buttons in the following sequence, which resets the pin to "0-0-0-0" : POWER (off) MUTE 8 2 4 POWER (on).
V-Chip Lock (Off / On) : You can block rated TV Programs.
TV Parental Guidelines : You can block TV programs depending on their rating. This function allows you to control what your children are watching.
TV-Y: Young children / TV-Y7: Children 7 and over / TV-G: General audience / TV-PG: Parental guidance / TV-14: Viewers 14 and over / TV-MA: Mature audience
ALL: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L: Adult Language / D: Sexually Suggestive Dialog
The V-Chip will automatically block certain categories dealing with more sensitive material. For example, if you block TV-Y category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the young adult group will be blocked (TV-G,
TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together similarly. So, if you block L sub-
rating in TV-PG, then the L sub-ratings in TV-14 and TV-MA will automatically be blocked.
MPAA Rating : You can block movies depending on their MPAA rating. The Motion Picture Association of America(MPAA) has implemented a rating system that provides parents or guardians with advance information on which films are appropriate for children.
G: General audience (no restrictions). / PG: Parental guidance suggested. / PG-13: Parents strongly cautioned. / R: Restricted. Children under 17 should be accompanied by an adult. / NC-17: No children under age 17. / X: Adults only. / NR: Not rated.
The V-Chip will automatically block any category that is ‘More restrictive’. For example, if you block the PG -13 category, then R, NC -17 and X will automatically be blocked also.
Canadian English C: Programming intended for children under age 8. /
C8+: Programming generally considered acceptable for
children 8 years and over to watch on their own. /
G: General programming, suitable for all audiences. / PG: Parental Guidance. / 14+: Programming contains
themes or content which may not be suitable for viewers under the age of 14. / 18+: Adult programming.
The V-Chip will automatically block any category that is ‘More restrictive’. For example, if you block G category, then PG, 14+ and 18 + will automatically be blocked also.
Canadian French G: General / 8 ans+: Programming generally considered
acceptable for children 8 years and over to watch on their own. / 13 ans+: Programming may not be suitable for children under the age of 13. / 16 ans+: Programming is not suitable for children under the age of
16. / 18 ans+: Programming restricted to adults.
The V-Chip will automatically block any category that is ‘More restrictive’. For example, if you block
8 ans+ category, then 13 ans+, 16 ans+ and 18 ans+ will automatically be blocked also.
Downloadable U.S. Rating : Parental restriction
information can be used while watching DTV channels.
NOTE
If information is not downloaded from the
x
broadcasting station, the Downloadable U.S. Rating menu is deactivated.
Parental restriction information is automatically
x
downloaded while watching DTV channels. It may take several seconds.
The xDownloadable U.S. Rating menu is available for use after information is downloaded from the broadcasting station. However, depending on the information from the broadcasting station, it may not be available for use.
Parental restriction levels differ depending on the
x
broadcasting station. The default menu name and Downloadable U.S. Rating changes depending on the downloaded information.
18
English
19
English
03 Basic Features
Even if you set the On-screen display to your desired
x
language, the Downloadable U.S. Rating menu will appear in English only.
The rating will automatically block certain categories
x
that are more restrictive. The rating titles (For example: Humor Level..etc) and
x
TV ratings (For example: DH, MH, H..etc) may differ depending on the broadcasting station.
How to watch a restricted channel
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: This channel is blocked by V-Chip. Please
enter the PIN to unblock.
If you forget the PIN, press the remote-control buttons
in the following sequence, which resets the pin to 0-0­0-0 : POWER (off) MUTE 8 2 4 POWER (on)
Other Features ¦
MENU
O m
Setup ENTER
E
Language
Set the menu language.
1. Select Language and press the ENTERE button.
2. Choose desired language and press the ENTERE
button.
Choose between English, Español and Français.
Caption
(On-Screen Text Messages)
Caption (Off / On) : You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.
The Caption feature does not
work in Component, HDMI or PC modes.
Caption Mode : You can select the desired caption mode.
The availability of captions depends on the
program being broadcasted.
Default / CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channels only) The Digital Captions
function works with digital channels.
Se rvic e1~6 may not be available in digital caption
mode depending on the broadcast.
Digital Caption Options : (digital channels only) Size: Options include Default, Small, Standard and
Large. The default is Standard. Font Style: Options include Default and Styles 0 to 7.
The default is Style 0. Foreground Color: Options include Default, White,
Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letter. The default is White.
Background Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the caption. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing.
Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent, Translucent, Solid and Flashing.
Return to Default: This option sets each Size, Font Style, Foreground Color, Background Color, Foreground Opacity and Background Opacity to its default.
NOTE
Digital Caption Options x are available only
when Default and Service1 ~ Service6 can be selected in Caption Mode.
The availability of captions depends on the
x
program being broadcasted. The xDefault setting follow the standards set by
the broadcaster. The Foreground and Background cannot be set
x
to have the same color. You cannot set both the xForeground Opacity
and the Background Opacity to Transparent.
Game Mode (Off / On)
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game menu.
NOTE
Restrictions on game mode (Caution)
x
To disconnect the game console and connect – another external device, set Game Mode to Off in the setup menu.
If you display the TV menu in Game Mode, the screen shakes slightly.
Game Mode x is not available when the input source
is set to TV or PC. After connecting the game console, set xGame Mode
to On. Unfortunately, you may notice reduced picture qualit y.
If xGame Mode is On:
Picture mode is set to Standard and Sound mode is set to Movie.
Equalizer is not available.
Basic Features
Melody (Off / Low / Medium / High)
Set up so that a melody sound comes on when the TV is powered On or Off.
Only available when the Input source is set to TV. To turn the melody off, set Melody to Off.
The Melody does not play.
When no sound is output from the TV because the
x
MUTE button has been pressed.
When no sound is output from the TV because the
x
volume has been reduced to minimum with the
VOL – button.
When the TV is turned off by xSleep Timer function.
Energy Saving (Off / Low / Medium / High / Auto)
Adjust the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy Saving to High to reduce eye fatigue as well as power consumption.
Support Menu
MENU
O m
Support ENTER
E
Self Diagnosis
Picture Test : Use to check for picture problems. If the
problem continues to occur, check the Color pattern. Yes: If the test pattern does not appear or there is
noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG).
No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.
Sound Test : Use the built-in melody sound to check for sound problems.
If you hear no sound from the TV’s speakers,
before performing the sound test, make sure
Speaker Select is set to TV speaker in the Sound menu.
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.
Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG).
No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.
Signal Strength : (Digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.
Software Upgrade
Upgrades will be possible by connecting a USB drive to the USB port. Download the latest firmware from samsung.com and save to the USB drive.
Current Version - the software already installed in the TV.
Software is represented as ‘Year/Month/Day_Version’.
USB Drive
TV Rear Panel
HD Connection Guide
Refer to this information when connecting external devices to the TV.
Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software.
20
English
Advanced Features
USB
Photo
Photo Music Setup
SUM
307.2MB/973.7MB
Music
Photo Music Setup
SUM
307.2MB/973.7MB
USB
MEDIA.P
POWER
Enjoy photos and/or music files saved on a USB Mass Storage Class (MSC) device.
O m
MENU
(USB) ENTER
Connecting a USB Device ¦
Application Media Play
E
Media Play
Device Name
SUM
315.0MB/495.0MB Free
E
Enter e Exit
04 Advanced Features
1. Turn on your TV.
2. Connect a USB device containing photo and/or music files to the USB jack on the
rear of the TV.
3. When the Application selection screen is displayed, press the button to select Media Play (USB), then press the ENTERE button.
USB Drive
TV Rear Panel
Using the Media Play Menu
Viewing a Photo (or Slide Show)
1. Press the MENU button. Press the or button to select Application, then press the ENTERE button.
2. Press the or button to select Media Play (USB), then press the
ENTERE button.
3. Press the or button to select the corresponding USB Memory
Device, then press the ENTERE button.
The Media Play menu differs depending on the USB Memory
Device connected to TV. Some devices may not be supported due to compatibility
problems.
4. Press the or button to select an icon (Photo, Music, Setup), then press the ENTERE button.
It might not work properly with unlicensed multimedia files.
Need-to-Know List before using Media Play (USB)
Only alphanumeric characters must be used as a folder name or file name (photo, music).
x
The file system only supports FAT16/32 (The NTFS file system is not supported) Certain types of USB Digital camera
x
and audio devices may not be compatible with this TV. Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
x
Transport device. Examples of MSC are Thumb drives and Flash Card Readers. Devices should be connected directly to the TV’s USB port. USB (HDD) is not supported.
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
x
SAMSUNG is not responsible for any data file damage or data loss. Please connect directly to the xUSB port of your TV. If you are using a separate cable connection, there may be a USB
Compatibility problem. Only MP3 and JPEG file formats are supported.
x
The xMedia Play (USB) mp3 format only supports music files with a high sampling frequency (32 kHz, 44.1 kHz, or 48 kHz).
We recommend the sequential jpeg format.
x
Do not disconnect the USB device while it is loading.
x
L
Move E Enter R Return
English
21
Loading...
+ 47 hidden pages