Samsung BN68-02610C-01 User Manual

Quick Setup Guide

AV IN 2

(HDD)

USB1

USB2

(

HDD)

HDMI IN 4

AV IN 2

(HDD)

USB1

USB2

(

HDD)

HDMI IN 4

AV IN 2

(HDD)

USB1

USB2

(

HDD)

HDMI IN 4

AV IN 2

(HDD)

USB1

USB2

(

HDD)

HDMI IN 4

AV IN 2

(HDD)

USB1

USB2

(

HDD)

HDMI IN 4

Congratulations on the purchase of your new Samsung TV. Read this setup guide to get your TV up and running quickly.

1-800-SAMSUNG (1-800-726-7864)

STOP

Please do not return this u nit.

If you hav e problems operati ng your

TV, call:

1-800-SAMS UNG (1-800-726-78 64)

For web su pport please visi t:

www.samsung.com /support

Samsung Electronics America, Inc. 85 Challenger Road Ridgeeld Park, NJ 07660-2112 Samsung Electronics Canada Inc. 55 Standish Court Mississauga, Ontario L5R 4B2 Call Center hours of operation: Mon-Sun, 9:00 AM -12 AM EST.

To register this product, visit:

www.samsung.com/register.

Step 4 :

Connect External Devices

Connecting an AV device (Blu-ray player, cable/satellite box, etc.)

For the very best picture quality, select HD signal sources and use HDMI cables and connections. Note that many digital cable programs are not in HD. Check with your video provider to ensure your are receiving HD signals.

LN32C530 / LN37C530 / LN40C530 / LN46C530 / LN52C530

HD connection (up to 1080p)

Using an HDMI Cable

HDMI OUT

Device

Connecting an audio device

Connect your TV to your Home Theater or other audio device to enjoy enhanced sound quality.

Analog Audio connection

Using an Audio Cable

AUDIO IN

Ampliﬁer / DVD Home Theater

Device

Getting Started

Step 1 :

Follow the steps below to connect the TV to the stand.

Make sure to distinguish between the front and back of the Stand and Guide

✎

Stand when assembling them.

Make sure that at least two people lift and move the LCD TV.

✎

Stand the product up and fasten the screws. If you fasten the screws with the

✎

LCD TV placed down, it may lean to one side.

1 3

Rear

Stand

Screw

Install the Stand

Guide Stand

Front

(32 inch model only)

Bottom View

Top View

Audio/Video connection (480i only)

Using an Audio/Video Cable

VIDEO OUT

AUDIO OUT

VCR / DVD / Blu-ray player / Cable Box / Satellite receiver

Lowest Quality Connection

VCR

The HDMI connection carries

digital video and audio.

When connecting to ✎AV 1 on the back of your TV, attach the video cable (yellow) to the green jack next to the AV IN 1 label. The jack will not match the color of the video cable (yellow).

DVD / Blu-Ray player / HD Cable Box / HD Satellite receiver (STB)

Best Connection

HD connection (up to 1080p)

Using an DVI to HDMI Cable

DVI OUT

AUDIO OUT

Device

DVD / Blu-Ray player / Cable Box / Satellite receiver (STB)

Very Good Connection

Component connection (up to 1080p)

Using a Component Cable

AUDIO OUT

COMPONENT OUT

VCR / DVD / Blu-ray player / Cable Box / Satellite receiver

Good Connection

Device

Digital Audio connection

OPTICAL

Connecting a PC

Connect your TV to a PC to use it as a Monitor.

LN32C530 / LN37C530 / LN40C530 / LN46C530 / LN52C530

HD connection

AUDIO OUT

Using an Optical Cable

Digital Audio System

Using an HDMI Cable

DVI OUT

Using an D-Sub Cable

LN40C540 / LN46C540

HD connection (up to 1080p)

PC OUT

AUDIO OUT

Using an HDMI Cable

Device

LN40C540 / LN46C540

HD connection

Using an HDMI Cable

AUDIO OUT

DVI OUT

Step 2 :

Install the Batteries into the Remote

To install batteries into your remote control, follow these steps:

1. Lift the cover on the back of the remote upward as shown in the ﬁgure to the right.

2. Install two AAA batteries.

Make sure to match the + and - ends of

✎

the batteries to the diagram in the battery compartment.

HDMI OUT

DVD / Blu-Ray player / HD Cable Box / HD Satellite receiver (STB)

Best Connection

HD connection (up to 1080p)

Using an DVI to HDMI Cable

DVI OUT

3. Replace the cover.

AUDIO OUT

Step 3 :

Connect Power and Antenna or Cable

Very Good Connection

Component connection (up to 1080p)

Connect ANT IN to:

• Wall cable jack or

Power Input

Use a 75 ohm (round) cable.

Make sure the AC power cord

is plugged in securely to the

wall outlet and the TV.

• VHF/UHF

Antenna or

• Cable or Satellite box Ant or Cable

Out

Audio/Video connection (480i only)

Using an Audio/Video Cable

VIDEO OUT

AUDIO OUT

VCR / DVD / Blu-ray player / Cable Box / Satellite receiver

Lowest Quality Connection

VCR

When connecting to ✎AV1 on the back of your TV, attach the video cable (yellow) to the green jack next to the AV IN 1 label. The jack will not match the color of the video cable (yellow).

English - 1

Using a Component Cable

AUDIO OUT

VCR / DVD / Blu-ray player / Cable Box / Satellite receiver

DVD / Blu-Ray player / Cable Box / Satellite receiver (STB)

COMPONENT OUT

Good Connection

Device

Using an D-Sub Cable

PC OUT

AUDIO OUT

PRE-CH

CHLIST

PRE-CH

CHLIST

Step 5 :

PRE-CH

TOOLS

FA V. CH

INFO

CHLIST

MEDIA.P

PRE-CH

TOOLS

FA V . CH

INFO

RETURN

CHLIST

EXIT

MEDIA.P

P . MODE

S.MODE

P . SIZE CC

SLEEP MTS

Run Plug & Play

When you turn on your TV for the rst time, it automatically launches the Plug & Play function. With Plug & Play, you can select the On Screen Display language,

set the clock mode, and launch the TV’s channel memorizing process. It also

displays connection instructions similar to those in this guide.

To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow buttons on your remote. To make a selection, press the ENTERE button. To skip a screen, press the MENU button.

To turn on your TV, press the POWER button on the remote or press the

POWER button on the TV. To run Plug & Play, follow these steps:

Plug & Play

Sel ect Lang uage of the O SD.

Lan guage : English

1. On the Language screen, select the language for the On Screen Display

(OSD) using your remote control, and then press ENTERE button. The Home Use screen appears.

2. Select Home Use, and then press ENTERE button. If you select Store

Demo, the TV will reset your picture and audio settings every 30 minutes. After

you press ENTERE button, the Antenna Source screen appears.

3. If your TV is only attached to an antenna, select Air. If your TV is only

attached to cable and you have no cable box, select Cable. If your TV is attached to an antenna and cable with no box, select Auto. When done, press ENTERE button on your remote. The Select Cable System screen appears.

IMPORTANT:

3 through 5. After

If your TV is attached to a cable or satellite box, skip Steps

Plug & Play

according to the directions for your cable or satellite box.

4. If your TV is attached to a cable system and you have no cable box, you

must select your cable system type. If you have Digital cable, you must

select the cable system type for both Analog and Digital.

English

Español

Français

Move E Enter

is complete, set your TV to Channel 3 or 4,

Remote Control Buttons and Functions:

This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, Volume buttons.

✎

Turns the TV on and off.

Press number buttons for direct access to channels.

Press to select additional digital channels broadcast by

the same station. For example, to select channel 54-3,

Selects the on-screen menu items and changes the

Colored buttons for use in the Channel List, Media Play

Use these buttons in the Media Play and Anynet+ modes.

( : Controls recording on Samsung recorders with the

press 54, press -, and then press 3.

Adjusts the volume.

Displays the channel list on the screen.

View the Media Play.

Quickly selects frequently used functions.

values seen on the menu.

Return to the previous menu.

menu, etc.

Anynet+ feature)

After you have selected the cable system type, select Start, and then

press the ENTERE button on your remote.

Most cable systems are Standard ✎(STD) systems. If you are not sure about what kind of cable system you have, contact your cable company.

5. The TV memorizes the available channels. This process can take up to 45 minutes. After the TV has memorized the channels, the Clock Mode screen

appears.

6. Choose the Clock Mode. Select Auto if you have a digital channel in your area. Select Manual if you don’t, or if you have a cable or satellite box. When

done, press ENTERE button. The Daylight Savings screen appears.

If you select ✎Manual, the clock setting screen appears.

7. Select the daylight saving time setting: Off, On, or Auto, and then press

ENTERE button.

8. After the time zone screen, The connection method for best HD screen quality

is displayed. Press Right arrow button on your remote to view each screen in succession. Press the Blue button to skip this section.

9. The Enjoy your TV screen appears. and then press ENTERE button.

Basic Functions

Selecting a Source

To watch a movie on your Blu-ray player or watch your favorite TV show, you must select the correct source. A source is a device, such as a Blu-ray/DVD player, a cable/satellite box, antenna or a cable TV input. Sources can be connected to your TV through the HDMI, DVI, Component, Composite, or D-sub connections, or through the Antenna or Cable In

connections.

To view the signal from a source connected to the HDMI, DVI, Component, Composite, or D-sub jack, press the SOURCE button on your remote. Each time

you press the SOURCE button, you change to a different source.

Press to switch between the sources (Blu-ray player, cable box, DVD player, etc.) connected to your TV.

Return to the previous channel.

Cut off the sound temporarily.

Change channels.

Displays the main on-screen menu.

Displays Favorite Channel Lists on the screen.

Press to display information on the TV screen.

Exit the menu.

S.MODE: Selects the sound mode.

SLEEP: Setting the Sleep Timer.

MTS: Press to choose stereo, mono or Separate

Audio Program (SAP broadcast).

P.MODE: Selects picture mode.

P.SIZE: Choose the picture size.

CC: Controls the caption decoder.

English - 2

Changing the Screen Size

Your TV has several screen size options, each designed to work best with specic

types of video input. If you have a cable box or satellite receiver, it may have its own

set of screen sizes as well.

To change the screen size, press the P.SIZE button on your remote. The ﬁrst time you press it, your TV displays the current setting. There after, each time you press

the P.SIZE button, you change the size of the picture on the screen.

The following sizes are available:

16:9 Wide screen

Wide Fit

Zoom 1

4:3 Standard screen

Zoom 2

Screen Fit

Screen Fit ✎ displays a full HD picture covering the entire screen with no cutoff

on any side. It is only available when your TV inputs an HDMI (720p, 1080i, 1080p), Component (1080i, 1080p), or DTV (over-the-air 1080i) signal.

Changing the Picture Mode

Your TV has four preset Picture Modes with factory adjusted settings, each

designed to give you an excellent picture under speciﬁc conditions.

The Picture Modes are listed and described in the table below:

Mode Description

Dynamic

Brightens picture. For a vibrant, enhanced image in brightly lit or

sunny room.

Standard For a bright, detailed picture in a normally lit room.

Natural For a comfortable, easy-on-the-eyes picture in a normally lit room.

Movie For a studio quality cinema picture in a dimly lit or dark room.

To change the Picture Mode, follow these steps:

1. Turn on your TV.

2. Using your remote, press the MENU button on your remote. Then, select Picture → Mode.

3. On the Picture Mode menu, use the ◄ or ► on your remote to select the Picture Mode you want.

4. Press the EXIT button to exit the menu.

Viewing the On Screen Menus

To view the On Screen Menus, follow these steps:

1. With the power on, press the MENU button

on your remote. The main menu appears. The menu’s left side has the following menu options: Picture, Sound, Channel, Setup,

Input, Application, and Support.

2. Press the ▲ or ▼ button on your remote

to select a menu option, and then press the

ENTERE button.

3. When done using the menu, press the EXIT button on your remote to exit.

Changing Channels and Adjusting the Volume

Volume

Adjust the volume by pressing the

button on the remote.

You can also change the channels by pressing the

buttons on

the front panel of your TV and adjust the volume by

pressing the

buttons.

Change the channels by pressing

the

If your TV is attached to a cable

✎

or satellite box, you change the

button on the remote.

channel using the box’s remote.

Remote control sensor

Channel

Power Indicator

Setting the Clock

Before you can use your TV’s On/Off Timer, you must set the clock. To set the clock, follow these steps:

1. Turn on your TV.

Clock Set

2. Using your remote, press the MENU

button on your remote. Then, select Setup → Time.

3. Select Clock Mode, and then press

the ENTERE button. Set Clock Mode to Auto or Manual.

Select Auto if you have a digital

✎

channel in your area and are not

Month Day Year

-- -- ----

Hour Minute am/pm

-- -- --

Move U Adjust

Enter

Return

using a cable/sat box.

When you set Clock Mode to Manual

4. Select Clock Set, and then press the ENTERE button. The Clock Set screen

appears.

5. Using the number buttons on your remote, enter the Month, Day, Year, Hour, and Minute. Use the ◄ or ► button to move between entry ﬁelds.

6. Press the RETURN button on your remote when done.

Connecting a USB Device for Media Play

You can enjoy photo, music, and movie ﬁles stored on a USB device by connecting it to the TV and using the Media Play feature. To connect a USB device for Media Play, follow these steps:

1. Turn on your TV.

2. Connect a USB device

containing photo, music and/

or movie ﬁles to the USB (HDD)

jack on the side of the TV.

MediaPlay

Videos

3. When the Application selection

screen appears, press the

ENTERE button on your

remote to select Media Play

SUM

(USB).

Change Device

TV Side Panel

USB Drive

View Devices E Enter R Return

BN68-02610C-01