Samsung BN68-01900M-01 User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

EIRE 0818 717 100 www.samsung.com/ie U.K 0845 SAMSUNG (7267864) www.samsung.com/uk

Customer Care Centre

Web Site

LCD TV

user manual

BN68-01900M-01

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model Serial No.

Information on Use

English

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

Do not display a still image and partially still image on the LCD panel for more than 2 hours as it can cause screen



image retention. This image retention is also known as screen burn. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.



Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.



To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

WARNINGS:

■

Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is displayed continuously. The most common causes of image retention are logos that remain stationary on the TV screen. These logos are common on many programmes received via a Set-top Box.

To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour to avoid black borders top or bottom by using the zoom function. This will help eliminate the black borders and fit the picture to the entire area of the screen. Using a video game console may cause image retention and is not recommended. When using a PC input, avoid displaying still images for long durations and reduce the brightness or contrast settings to decrease the intensity of the picture.

IMPORTANT:

■

Image retention issues are not covered by your Samsung® warranty.

Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

Digital TV Notice

Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC)

■

digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C(MPEG2 and MPEG4 AAC) cable- TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.

DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and

■

DVBC is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video on Demand) and so on, are not included in this specification. So, they cannot be workable at this moment.

Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future

■

DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.

Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for

■

such a service and you may be required to agree to terms and conditions of their business.

Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with

■

some cable service providers.

For more information, please contact your local Samsung customer care centre.

■

English

Trademark & Label License Notice

TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is

incorporated under license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

DivX® Certified to play DivX® video, including premium content.

Symbol

Note

One-Touch Button

TOOL Button

Press

Contents

English

6 Installing the Stand

Disconnecting the Stand

Installing the Wall Mount Kit

Assembling the Cables

Anti-Theft Kensington Lock

Securing the Installation Space

Securing the TV to the Wall

Accessories

Viewing the Control Panel

Viewing the Connection Panel

Connections

Installing Batteries in the Remote Control

Viewing the Remote Control

17 Placing Your Television in Standby Mode

Plug & Play Feature

Viewing the Display

19 Viewing the Menus

Channel Menu

24 Picture Menu

Getting Started

Basic Operation

Using the Menus

19 Country Auto Store 20 Manual Stor Cable Search Option 21 Full Guide / Mini Guide / Default Guid 22 Channel Lis 23 Channel Mod Fine Tune

24 Mode Backlight / Contrast / Brightness / Sharpness /

Colour / Tint(G/R) Advanced Settings 25 Picture Option 27 Picture Rese Auto Adjustment Screen

28 Sound Menu

28 Mode Equalizer SRS TruSurround HD Audio Language Audio Format Audio Description Auto Volume Speaker Select 29 Sound Selec Sound Reset

30 Setup Menu

30 Language Time 31 Game Mod BD Wise Network Type / Network Setup Child Lock Change PIN Parental Lock 32 Subtitl Teletext Language Preference Digital Text Melody Energy Saving 33 PI

Common Interface

34 Network Connection

Setting the Network

36 Network Type Network Setup

39 Input Menu

39 Source List Edit Name

40 Support menu

40 Legal Notice Product Guide Self Diagnosis 41 Software Upgrad HD Connection Guide Contact Samsung

English

Media Play - USB Device

Home Network Centre

42 Connecting a USB Device

Media Play Function

Sorting the Photo List

Viewing a Photo or Slide Show

Sorting the Music List

Playing a Music

Sorting the Movie List

Playing a Movie File

Using the Setup Menu

Media Play-DLNA

56 Setting the DLNA Network

Installing the DLNA Application

Using the DLNA Application

Using the DLNA Function

Anynet

61 Connecting Anynet+ Devices

Setting Up Anynet

Switching between Anynet+ Devices

Recording

Listening through a Receiver (Home Theatre)

Troubleshooting for Anynet

78 About the Home Network Centre

Connecting to the Home Network Centre

Setting Up the Home Network Centre

Using the Message Function

Using the Media Function

Other Information

82 Teletext Feature

Using Your TV as a Computer (PC) Display

Troubleshooting: Before Contacting

Service Personne

Specications

Warning! Important Safety Instructions

Wiring the Mains Power Supply Plug (UK Only)

Warranty Card

Content Library

66 Using the Content Library

Using the Contents

Using the Content Management

Internet@TV

69 Getting Started with Internet@TV

Using the Prole Widget

Using the Yahoo!® Widget Gallery

Using the Yahoo!® Weather Widget

Using the Yahoo!® News Widget

Using the Yahoo!® Flickr Widget

Using the Yahoo!® Finance Widget

Troubleshooting for Internet@TV

Help Website

English

Getting Started

Installing the Stand

Getting Started

Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to 32inch models only.

Attach your LCD TV to the stand.

Two or more people should carry the TV.

■

Make sure to distinguish between the front and back of the stand when assembling

■

them. To make sure the TV is installed on the stand at a proper level, do not apply excess

■

downward pressure to the upper left of right sides of the TV.

Fasten screws at position 1 and then fasten screws at position 2.

Stand the product up and fasten the screws. If you fasten the screws with the LCD

■

TV placed down, it may lean to one side. The stand is installed for models with the screen size of 37 inch and above.

■

Front

Disconnecting the Stand

Back

Remove four screws from the back of the TV.

Separate the stand from the TV.

Two or more people should carry the TV.

■

Cover the bottom hole with the cover.

1 2 3

English

Getting Started

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal

■

injury due to electric shock. Remove the stand and cover the bottom hole with a cap and fasten with two screws.

■

Assembling the Cables

Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the transparent stand.

Anti-Theft Kensington Lock

The Kensington Lock is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use.

The locking device has to be purchased separately.

■

The location of the Kensington Lock may be different depending on its model.

■

Insert the locking device into the Kensington slot on the LCD TV (1) and turn it in the

locking direction (2).

Connect the Kensington Lock cable (3).

Fix the Kensington Lock to a desk or a heavy stationary object.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper

English

ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product. Install the product so the required distances shown in the figure are kept.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

■

Getting Started

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling. If you use parts provided by another manufacturer, it may result in a problem with the product or fire due to an increase in the internal temperature of the product due to poor ventilation.

The appearance may differ depending on the product.

■

When installing the product with a stand When installing the product with a wall-mount

10 cm

English

Getting Started

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.

To avoid the TV from falling:

Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the

screws have been firmly installed onto the wall.

You may need additional material such as an anchor depending on the type of

■

wall. Since the necessary clamps, screws, and string are not supplied, please

■

purchase these additionally.

Remove the screws from the centre back of the TV, put the screws into the clamps,

and then fasten the screws onto the TV again.

Screws may not be supplied with the product. In this case, please purchase the

■

screws of the following specifications. Screw Specifications:

■

For a 32 ~ 40 Inch LCD TV: M6 X L15



Wall

Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong

string and then tie the string tightly.

Install the TV near to the wall so that it does not fall backwards.

■

It is safe to connect the string so that the clamps fixed on the wall are equal to or

■

lower than the clamps fixed on the TV. Untie the string before moving the TV.

■

Verify all connections are properly secured. Periodically check connections for any

sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer.

Wall

English

Getting Started

Accessories

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

■

Remote Control & Batteries

(AAA x 2)

User Manual

The items colour and shape may vary depending on the model.

■

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

■

Product design and specifications may be changed without notice in order to enhance product performance.

Power Cord Cover-Bottom Cleaning Cloth

(M4 X L16)

Stand Screw X 4

(Depending on the model)

Programme CD

Holder-Wire Cable

(Depending on the model)

English

Getting Started

Viewing the Control Panel

The product colour and shape may vary depending on the model.

■

The front panel buttons can be activated by touching it with your finger.

■

Press to increase or decrease the volume. In the on-screen menu, use the

◄ and ► buttons on the remote control.

buttons as you would use the

Press to change channels. In the on-screen menu, use the z

buttons as you would use the ▼ and ▲ buttons on the remote control.

Speakers

Aim the remote control towards this spot on the TV.

Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.

Press to turn the TV on and off.

Blinks and turns off when the power is on and lights up in stand-by mode.

Press to see an on-screen menu of your TV’s features.

Press to turn the TV on and off.

Press to change channels. In the on-screen menu, use the z buttons as you would use

the ▼ and ▲ buttons on the remote

control.

Aim the remote control towards this spot on the TV.

Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.

Press to see an on-screen menu of your TV’s features.

Press to increase or decrease the volume. In the on-screen menu, use the

would use the ◄ and ► buttons

on the remote control.

buttons as you

Blinks and turns off when the power is on and lights up in standby mode.

890! 7 6

21 34 5

890! 7 6

21 34 5

English

Getting Started

Viewing the Connection Panel

The product colour and shape may vary depending on the model.

■

1 COMPONENT IN Connects Component video / audio.

2 HDMI IN 1, 2, 3(DVI), 4 / DVI AUDIO IN Connects to the HDMI jack of a device with an HDMI output.

No sound connection is needed for an HDMI to HDMI connection.

■

What is HDMI?

■

HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video



signals using a single cable.

The difference between HDMI and DVI is that the HDMI device is smaller than DVI’s one.



The TV may not output sound and pictures may be displayed with abnormal colour when DVD / Blu-ray player / Cable Box

■

/ Satellite receiver (Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 3(DVI) jack and the audio cables to the DVI AUDIO IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) to confirm the HDMI version, then request an upgrade.

Use the HDMI IN 3(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI

■

to HDMI) for video connection and the DVI AUDIO IN jacks for audio. When using an HDMI / DVI cable connection, you must use the HDMI IN 3(DVI) jack.

HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

■

3 PC IN [PC] / [AUDIO] Connects to the video and audio output jacks on your PC.

If your PC supports an HDMI connection, you can connect this to the HDMI IN 1, 2, 3(DVI) or 4 terminal.

■

If your PC supports a DVI connection, you can connect this to the HDMI IN 3(DVI) / DVI AUDIO IN terminal.

■

4 ANT IN Connects to an antenna or cable TV system.

5 LAN Connect a LAN cable to this port to connect to the Network.

6 KENSINGTON LOCK (depending on the model) The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a

locking device, contact the dealer where you purchased the TV.

The location of the Kensington Lock may be different depending on its model.

■

English

Getting Started

7 H(HEADPHONE)

Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled.

Using the sound function is restricted when connecting headphones to the TV.

■

Prolonged use of headphones at a high volume may damage your hearing.

■

You will not hear sound from the speakers when you connect headphones to the TV.

■

The headphone volume and TV volume are adjusted separately.

■

8 DIGITAL AUDIO OUT (OPTICAL) Connects to a Digital Audio component such as a Home theatre receiver.

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV and

■

adjust the volume level with the system’s volume control.

5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.

■

When the receiver (home theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a

■

DTV(air) signal, the TV will send out 5.1 channel sound to the Home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theatre receiver. If you want to hear 5.1 channel audio, connect the digital audio out jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an Amplifier or Home Theatre, not the TV.

9 SERVICE Connector for service only. 0 AUDIO OUT [R-AUDIO-L] Connects to the audio input jacks on your Amplifier/Home theatre. When an audio amplifier is connected to the AUDIO OUT [R-AUDIO-L] jacks: Decrease the volume of the TV and adjust the

volume level with the Amplifier’s volume control.

! EXT1, 2 Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

In EXT Mode, DTV Out supports MPEG SD Video and Audio only.

■

Input/Output Specification

■

Connector

EXT 1 O O O Only TV or DTV output is available. EXT 2 O O X Output you can choose.

@ AV IN [VIDEO] / [R-AUDIO-L] Video and audio inputs for external devices, such as a camcorder or VCR. # USB1(HDD) / USB2 Connector for software upgrades and Media Play, etc. You can connect to Samsung’s network wirelessly using the ‘Samsung Wireless LAN Adapter’ (Sold separately).

For USB HDD, use the USB1 (HDD) port.

■

$ COMMON INTERFACE Slot

Insert CI (Common Interface) card into the slot.

■

When not inserting ‘CI CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen.

■

The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about

■

2~3 minutes. If an error message is displayed, please contact your service provider. When the channel information configuration has finished, the message ‘Updating Completed’ is displayed, indicating that the

■

channel list is now updated.

You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with



your hands since dropping the CI CARD may cause damage to it. Insert the CI-Card in the direction marked on it.



The place of the COMMON INTERFACE Slot may be different depending on its model.



CAM is not supported in some countries and regions, check with your authorized dealer.



The CI+ function is only applicable to LE********P.



If you have some problems, please contact to service provider.

Video Audio (L / R) RGB Video + Audio (L / R)

Input Output

English

Getting Started

Connections

Best

OPTICAL (Digital)

AUDIO (Analog)

Normal

Analog Audio connection

Using a Audio Cable

Amplier / DVD Home Theater

AUDIO IN

Digital Audio connection

Using an Optical Cable

Digital Audio System

OPTICAL

HD connection

Using a D-Sub Cable

Using an HDMI Cable

HDMI OUT

HD connection

Using a D-Sub Cable

Using an HDMI/DVI Cable

DVI OUTAUDIO OUT

Using a D-Sub Cable

PC OUTAUDIO OUT

English

Getting Started

Installing Batteries in the Remote Control

Lift the cover at the back of the remote control upward as shown in the figure.

Install two AAA size batteries.

Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside

■

the compartment.

Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using

■

the remote control for a long time. (Assuming typical TV usage, the batteries should last for about one year.)

If the remote control doesn’t work, check the following:

■

Is the TV power on?



Are the plus and minus ends of the batteries reversed?



Are the batteries drained?



Is there a power outage or is the power cord unplugged?



Is there a special fluorescent light or neon sign nearby?



English

Getting Started

Viewing the Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.

■

The performance of the remote control may be affected by bright light.

■

The product colour and shape may vary depending on the model.

■

Turns the TV on and off.

Selects the TV mode directly. (p. 82)

Press to change the channel.

Performs the same function as the ENTERE button of the directional buttons. When switching channels with the numeric buttons, and you press the channel number and then the ENTERE button, the channel is immediately switched.

Press to increase or decrease the volume.

Displays the Channel List on screen. (p. 22)

Displays the main on-screen menu. (p. 19)

Use to quickly select frequently used functions.

Use to select on-screen menu items and change menu values. (p. 19)

Press to use various internet services to view useful formation and entertaining content. (p. 69)

Pressing the ON/OFF @ light button toggles between on and off. When the remote control is on, and a button is pressed on the remote control, the remote control buttons will be lit for a moment. (Using the remote control with the ON/OFF @ light button set to On will reduce the battery usage time.)

Enables you to return to the previous channel you were watching.

Press to change channels.

Press to temporarily cut off the sound. (p. 40)

Press to display and select the available video sources. (p. 40)

Used to display Favourites channel Lists on the screen. (p.

22)

Returns to the previous menu.

Press to exit the menu. (p. 19)

Use these buttons in the

Channel list, Internet@TV, Media Play menu, etc.

Alternately select Teletext, Double, or Mix. (p. 82)

Press to display information on the TV screen. (p. 18)

Use these buttons in the Media Play and Anynet+ modes. (∏: This remote can be used to control recording on Samsung recorders with the Anynet+ feature)

8 4

Colour buttons Fastext

Teletext mode selection (LIST / FLOF)

Teletext store

Teletext

size selection

topic selection

Teletext Functions (p. 82)

Teletext

: 1 2

reveal

Exit from the Teletext display

Teletext

sub page

Teletext

Allows you to play music files, pictures, and movies. (p. 43) This function enables you to view the Content Library. (p. 67)

Displays the Digital subtitle. (p. 32)

Displays the Electronic Programme Guide (EPG). (p. 21)

Teletext previous page

Teletext

index

hold

cancel

6 9 7

Basic Operation

Placing Your Television in Standby Mode

English

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

Press the POWERP button on the remote control.

The screen is turned off and a red standby indicator appears on your set.

■

To switch your set back on, simply press the POWERP button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to

■

unplug the set from the mains and aerial.

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

Press the POWERP button.

You can also use the POWERP button on the TV.

■

2 3

4 5

8 9

The message Select the OSD Language. is displayed.

■

Press the ENTERE button. Select the appropriate language by pressing the

▲ or ▼ button. Press the ENTERE button to confirm your choice.

Press the ◄ or ► button to select Store Demo or Home Use, then the

ENTERE button.

We recommend setting the TV to Home Use mode for the best picture in your

■

home environment. Store Demo mode is only intended for use in retail environments.

■

If the unit is accidentally set to Store Demo mode and you want to return to

■

Home Use (Standard): Press the volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

Press the ENTERE button. Select the appropriate country by pressing the

▲ or ▼ button. Press the ENTERE button to confirm your choice.

Press the ▲ or ▼ button to select Air or Cable, then press the ENTERE button.

Air: Air antenna signal.

■

Cable: Cable antenna signal.

■

Press the ▲ or ▼ button to select the channel source to memorize.

Press the ENTERE button to select Start.

When setting the antenna source to Cable, a step appears allowing you to

■

set a value for the digital channel search. For more information, refer to pages 19~20.

Digital & Analogue: Digital and Analogue channels.

■

Digital: Digital channels.

■

Analogue: Analogue channels.

■

The channel search will start and end automatically.

■

After all the available channels are stored, the message Set the Clock Mode.

■

is displayed.

Press the ENTERE button. Press the ▲ or ▼ button to select Auto, then press

the ENTERE button.

If you select Manual, Set current date and time is displayed.

■

If you have received a digital signal, the time will be set automatically. If not,

■

select Manual to set the clock.

The description for the connection method providing the best HD screen quality is

displayed. Check the description and press the ENTERE button.

Press the ◄ or ► button to select See Product Guide or Watch TV. Press the ENTERE button.

See Product Guide: You are moved to the Product Guide where you can

■

view the introduction to the main functions of your new HDTV. Watch TV: You can watch the set broadcasting channel.

■

Plug & Play

Select the OSD Language.

Menu Language : English ▶

Enter

Press the ENTERE button

■

at any time to interrupt the memorization process.

Basic Operation

English

Basic Operation

If you want to reset this feature...

Press the MENU button.

Press the ▲ or ▼ button to select Setup, then press the ENTERE button.

Press the ENTERE button again to select Plug & Play.

Enter your 4 digit PIN number.

The default PIN number of a new TV set is ‘0-0-0-0’.

■

If you want to change PIN number, use the Change PIN function.

■

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.

Press the INFO button on the remote control.

The TV will display the channel, the type of sound, and the status of certain picture and sound settings.

Press the INFO button once more or wait approximately 10 seconds and the

■

display disappears automatically.

Setup

Plug & Play ▶

Language : English Time

Game Mode : Off BD Wise : On Network Type : Cable

Network Setup Child Lock : On

The Plug & Play feature is only

■

available in the TV mode.

Press the INFO button to viewing

■

the information.

abc1

DTV Air

18:11 Thu 6 Jan

Life On Venus Ave nue

Unclassif ied

No Detai ld Informa tion

18:00 ~ 6:00

E Watch ' Informat ion

Using the Menus

Viewing the Menus

English

Menu provides one button access for controlling your TV. It enables you to perform a variety of tasks intuitively with a control panel on the screen rather than a variety of remote control button presses.

Display the main on-screen menu.

ENTERE / Direction button

Move the cursor and select an item.

Select the currently selected item.

MENU button

Confirm the setting.

RETURN button Return to the previous menu.

EXIT button Exit the on-screen menu.

Operation the Menu

The access step may differ depending on the selected menu.

Press the MENU button.

The menu is displayed on the screen.

■

Press the ▲ or ▼ button to select one of the icons.

Press the ENTERE button to access the icon’s sub-menu.

Press the ▲ or ▼ button to move to items in the menu.

Press the ENTERE button to enter items in the menu.

Using the Menus

Press the ▲/▼/◄/► button to change the selected items.

Press the RETURNR button to return to the previous menu.

Press the EXITe button to exit from the menu.

Channel Menu

Channel

Option Description

Country Analogue Channel

Auto Store

❑

You can change the country for analogue channels.

Digital Channel

❑

You can change the country for digital channels. The PIN number input screen appears. Enter your 4 digit

PIN number. You can scan for the frequency ranges available to you

(and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers.

Scans for all channels with active broadcast stations and stores them in the TV’s memory.

Channel

Country ▶

Auto Store Manual Store Cable Search Option Full Guide Mini Guide Default Guide : Full Guide Channel List

If a channel is locked using the

■

Child Lock function, the PIN input window appears.

English

Using the Menus

Channel

Option Description

Auto Store Air / Cable

Manual Store

❑

Antenna source to memorize

Digital & Analogue: Digital and Analogue

■

channels. Digital: Digital channels.

■

Analogue: Analogue channels.

■

When selecting Cable → Digital & Analogue or Cable → Digital:

Provide a value to scan for cable channels.

Search Mode → Full / Network /Quick

■

Quick

■

Network ID: Displays the network



identification code. Frequency: Displays the frequency



for the channel. (Differs in each country)

Modulation: Displays available



modulation values. Symbol Rate: Displays available



symbol rates.

Scans for a channel manually and stores it in the TV’s memory.

Digital Channel

❑

Manual store for digital channels.

Channel: Set the Channel number using the ▲, ▼ or

■

number (0~9) buttons. Frequency: Set the frequency using the number buttons.

■ Bandwidth: Set the bandwidth using the ▲, ▼ or

■

number (0~9) buttons.

When it has finished, channels are updated in the channel list.

If you want to stop Auto Store,

■

press the ENTERE button. The Stop Auto Store? message will be displayed. Select Yes by

pressing the ◄ or ► button, then

press the ENTERE button.

If a channel is locked using the

■

Child Lock function, the PIN input window appears.

Digital Channel is only available

■

in DTV mode.

Cable Search Option (depending on the country)

Analogue Channel

❑

Manual store for analogue channel.

Programme (Programme number to be assigned to a

■ channel): Sets the programme number using the ▲, ▼

or number (0~9) buttons.

Colour System → Auto / PAL / SECAM / NTSC4.43:

■ Sets the colour system value using the ▲ or ▼ button.

Sound System → BG / DK / I / L: Sets the sound

■ system value using the ▲ or ▼ button.

Channel (When you know the number of the channel

■ to be stored): Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the

required number.

You can also select the channel number directly by



pressing the number (0~9) buttons. If there is abnormal sound or no sound, reselect



the sound standard required.

Search (When you do not know the channel numbers):

■ Press the ▲ or ▼ button to start the search. The tuner

scans the frequency range until the first channel or the channel that you selected is received on the screen.

Store (When you store the channel and associated

■

programme number): Set to OK by pressing the ENTERE button.

Sets additional search options such as the frequency and symbol rate for cable network searches.

Freq.Start (Frequency Start): Set the start frequency

■

(Differs in each country) Freq.Stop (Frequency Stop): Set the stop frequency

■

(Differs in each country) Modulation: Displays available modulation values.

■

Symbol Rate: Displays available symbol rates.

■

Analogue Channel is only

■

available in analogue TV mode.

Channel mode

■

P (Programme mode):



When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.

C (Air channel mode):



You can select a channel by entering the assigned number to each air broadcasting station in this mode.

S (Cable channel mode):



You can select a channel by entering the assigned number for each cable channel in this mode.

English

Using the Menus

Full Guide /

Mini Guide / Default Guide

Full Guide

900

Today

900 f tn 901 ITV Play 902 Kerrang! 903 Kiss 904 oneword

905 Hits

▼

Watch Information

Channel

Option Description

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available.

Full Guide

❑

Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which may be scrolled forwards or backwards in time.

Mini Guide

❑

The information of each programme is displayed by each line on the current channel Mini Guide screen from the current programme onwards according to the programme starting time order.

Default Guide → Mini Guide / Full Guide

❑

You can decide whether to display either the Mini Guide or the Full Guide when the GUIDE button on the remote control is pressed.

DTV Cable 900 f tn 2:10 Tue 1 Jun Freshmen On Campus 2:00 - 2:30 No Detailed Information

2:00 - 3:00 3:00 - 4:00

Freshmen O..

Street Hypn.. Mint Extra Loaded 40 with Dynamite MC The Distillery Smash Hits! Sunday

◀◀ ▶▶

Page Mini Guide +24 Hours Exit

No Information

No Information Kisstory No Information

You can also display the guide

■

menu simply by pressing the GUIDE button. (To configure the Default Guide, refer to the descriptions.)

Mini Guide

Mini Guide DTV Cable 900 f tn

2:00 2:30 5:00

▼

Watch Information

Freshmen On Campus Street Hypnosis Booze Britain

◀◀ ▶▶

Page Full Guide Next Page Exit

(Red)

Using the Full / Mini Guide

To... Then...

Watch a programme in the EPG list Select a programme by pressing the ▲, ▼, ◄, ► button.

Exit the guide Press the Blue button

If the next programme is selected, it is scheduled with the clock icon displayed. If the ENTERE button is pressed again, press the ◄, ► button to select Cancel Schedules, the scheduling is cancelled with the clock icon gone.

View programme information

Please click on INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information. “...” will be appeared if the summary is long.

Toggle between the Mini Guide and Full Guide Press the Red button repeatedly.

In Full Guide Scrolls backwards quickly (24 hours). Scrolls forwards quickly (24 hours).

In Mini Guide Display previous page quickly. Display next page quickly.

Select a programme of your choice by pressing the ▲, ▼, ◄, ► button.

Then press the INFO button when the programme of your choice is highlighted. The programme title is on the upper part of the screen centre.

Press the Green button repeatedly. Press the Yellow button repeatedly.

Press the Green button. Press the Yellow button.

English

Using the Menus

Option Description

Channel List

Channel

Using this menu, you can add / delete or set favourites channels and use the programme guide for digital broadcasts.

All Channels

❑

Shows all currently available channels.

Added Channels

❑

Shows all added channels.

Favourites

❑

Shows all favourite channels.

Programmed

❑

Shows all current reserved programmes.

Select a channel in the All Channels, Added Channels or Favourites screen by pressing the ▲ / ▼ buttons, and pressing the ENTERE button. Then you can watch the selected channel.

Using the Colour buttons with the Channel List

Red (Channel Type): Toggle between your TV, Radio,

■

Data / Other and All. Green (Zoom): Enlarges or shrinks a channel number.

■

Yellow (Select): Selects multiple channel lists.

■

You can perform the add/delete or add to favourites/ delete from favourites function for multiple channels at the same time. Select the required channels and press the Yellow button to set all the selected channels at the same time. The c mark appears to the left of the selected channels.

Channel List Option Menu (in All Channels /

Added Channels / Favourites)

Press the TOOLS button to use the option menu.

■

Option menu items may differ depending on the channel

■

status.

Add / Delete

❑

You can delete or add a channel to display the channels you want.

All deleted channels will be shown on All Channels

■

menu. You can also delete a channel to the Added Channels or

■

Favourites menu in the same manner.

Add to Favourite / Delete from Favourite

❑

You can set channels you watch frequently as favourites.

Press the TOOLS button to display the Tools menu.

You can also set the add to (or delete from) Favourite by selecting Tools → Add to Favourite (or Delete from Favourite).

The “*” symbol will be displayed and the channel will

■

be set as a favourite. All favourite channels will be shown on Favourites

■

menu.

Lock / Unlock

❑

You can lock a channel so that the channel cannot be selected and viewed.

This function is available only when the Child Lock is set

■

to On. The PIN number input screen appears. Enter your 4 digit

■

PIN number. The default PIN number of a new TV set is “0-0-0-0”. You

■

can change the PIN, by selecting Change PIN from the menu. The “\” symbol will be displayed and the channel will be

■

locked.

All Channel Type Zoom Select T Tools

You can select these options by

■

simply pressing the CH LIST button on the remote control.

To select the favourites channels

■

you have set up, press the FAV. CH button on the remote control.

TOOLS (Tools): Displays

■

the Delete (or Add), Add to Favourite (or Delete from Favourite), Lock (or Unlock), Timer Viewing, Edit Channel Name, Edit Channel Number, Sort, Select All (or Deselect All), Auto Store menu. (The

Options menus may differ depending on the situation.)

Channel Status Display Icons

■

A: An Analogue channel.



c: A channel selected by



pressing the Yellow button. *: A channel set as a



Favourite. (: A programme currently



being broadcast. \: A locked channel.



): A reserved programme



All Channels

824 UKTV Gold 825 UKTV style

1 C --

2 C --

3 C --

4 C --

5 C --

6 C --

7 C --

8 C --

A gray-coloured channel

■

Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort



indicates the channel has been deleted.

The Add menu only appears for

■

deleted channels.

English

Using the Menus

Channel

Option Description

Channel List Timer Viewing

❑

If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a programme, set the current time first.

You can set the channel, day, month, year, hour and

■

minute directly by pressing the number buttons on the remote control. Reserving a programme will be shown in the

■

Programmed menu. Digital Programme Guide and Viewing Reservation:

■

When a digital channel is selected, and you press

the ► button, the Programme Guide for the channel

appears. You can reserve a programme according to the procedures described above.

Edit Channel Name (analogue channels only)

❑

Channels can be labelled so that their call letters appear whenever the channel is selected.

Edit Channel Number (digital channels only)

❑

You can also edit the channel number by pressing the number buttons on the remote control.

Sort (analogue channels only)

❑

This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.

Select All / Deselect All

❑

Select All: You can select all the channels in the

■

channel list. Deselect All: You can deselect all the selected

■

channels.

Auto Store

❑

For detailed procedures on setting up options, refer to pages 19~20.

Channel List Option Menu (in Programmed)

You can view, modify or delete a reservation. Press the TOOLS button to use the option menu.

Change Info

❑

Select to change a viewing reservation.

Cancel Schedules

❑

Select to cancel a viewing reservation.

Information

❑

Select to view a viewing reservation. (You can also change the reservation information.)

Select All

❑

Select all reserved programmes.

Channel Mode

Fine Tune

When press the P >/< button, Channels will be switched within the selected channel list.

Added Ch.

❑

Channels will be switched within the memorized channel list.

Favourite Ch.

❑

Channels will be switched within the favourite channel list.

If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually.

Fine tuned channels that have been saved are marked

■

with an asterisk ‘*’ on the right-hand side of the channel number in the channel banner.

To reset the fine-tuning, select Reset by pressing the

■ ▲ or ▼ button and then press the ENTERE button.

Only memorized channels can

■

be reserved.

The names of digital

■

broadcasting channels are automatically assigned and cannot be renamed.

You can only select Deselect

■

All when there is a selected channel.

If a channel is locked using the

■

Child Lock function, the PIN input window appears.

Programmed

1 / 1 / 2009

13:59 5 TV1

18:59 2 TV3 ) The Equalizer 20:59 2 TV3 ) McMillan & Wife 21:59 2 TV3 ) M.Spillane’s mike

All Zoom Select T Tools E Information

Only Analogue TV channels can

■

)

Change Info Cancel Schedules Information Select All

be fine tuned.

English

Using the Menus

Picture Menu

Option Description

Mode

Backlight / Contrast / Brightness / Sharpness / Colour / Tint(G/R)

Advanced Settings

Selects the type of picture settings that best correspond to your viewing preferences or requirements. Presets a higher brightness, contrast, and sharpness to the picture.

Dynamic

■

Recommended for use in bright room conditions.

Standard

■

Recommended for use in a normal viewing condition.

Natural

■

Adds more punch and contrast to the image than the Standard mode.

Movie

■

Corresponding to the conditions used in movie, recommended for use in darker viewing conditions.

Your television has several setting options that allow you to control the picture quality.

Backlight

■

Adjusts the brightness of LCD back light.

Contrast

■

Increases or decreases the brightness in white areas of the picture. Too little contrast and the picture may seem dark; too much contrast and the picture will lose details in white images.

Brightness

■

Increases or decreases the overall brightness of the picture, but best used to adjust the black level of the image. Too little brightness and shadow detail will be lost; too much brightness and blacks will be gray and washed out.

Sharpness

■

Increases or decreases the apparent detail in the picture. Too little sharpness and the image might look soft. Too much sharpness can add false edges to objects or can make noise more noticeable.

Colour

■

Increases or decreases colour saturation levels in the picture. Too little colour and the image will be black and white (undersaturated); too much colour and the image will look oversaturated and cartoonish.

Tint(G/R)

■

Changes the picture hue from reddish to a greenish appearance.

Samsung’s new TVs allow you to make even more precise picture settings than previous models.

Black Tone → Off / Dark / Darker / Darkest

■

Increases the picture’s shadow detail by lightening the black level (ie changing the gamma) at low levels. This is most commonly used for watching movies with dark scenes to keep the picture from appearing washed out in bright rooms.

Dynamic Contrast → Off / Low / Medium / High

■

Increases or decreases the difference between the brightest and darkest portions of the image with changing scenes. Shadows are more visible with dark scenes, while contrast is enhanced with bright scenes.

Picture

Mode : Standard ▶

Backlight : 7 Contrast : 95 Brightness : 45 Sharpness : 50 Colour : 50

Tint (G/R) : G50/R50

Advanced Settings

Press the TOOLS button to

■

display the Tools menu. You can also set the picture mode by selecting Tools → Picture

Mode.

Natural is not available in PC

■

mode.

▲

Backlight

▼

Move L Adjust E Enter R Return

Only analogue TV, Ext., AV

■

modes of the PAL system, you cannot use the Tint(G/R) Function.

When you make changes to

■

Backlight, Contrast, Brightness, Sharpness, Colour or Tint(G/ R), the OSD will be adjusted

accordingly. In PC mode, you can only make

■

changes to Backlight, Contrast and Brightness.

Settings can be adjusted and

■

stored for each external device you have connected to an input of the TV.

The energy consumed during use

■

can be significantly reduced if the brightness level of the picture is lowered, which will reduce the overall running cost.

Advanced Settings

Black Tone : Off ▶

Dynamic Contrast : Medium

Gamma : 0

Colour Space : Native

White Balance

Flesh Tone : 0

Edge Enhancement : On

Move E Enter R Return

English

Using the Menus

Option Description

Advanced Settings

Picture Options

Picture

Gamma

■

Changes the rate at which images ramp or fade from light to dark. Recommended for advanced users only.

Colour Space

■

Increases or decreases the visible colour range for red, green and blue. Recommended for advanced users only.

Auto: The TV will choose the colour range that



is closest to the range used during TV and movie production.

Native: Displays the most enhanced, vibrant



colours possible. Custom: Provides precise saturation and colour



point adjustment of Red, Green, Blue, Yellow, Cyan, and Magenta. Recommended for advanced users only.

White Balance

■

You can adjust the colour temperature for more natural picture colours.

R, G, B-Offset: Fine tunes the white balance, or



colour ‘temperature’ in dark areas by changing the individual values of R, G, B. Recommended for advanced users only.

R, G, B-Gain: Fine tunes the white balance, or



colour ‘temperature’ in the light areas by changing the individual values of R, G, B. Recommended for advanced users only.

Reset: Resets the colour space to the default



values.

Flesh Tone

■

Adjusts the colour of flesh tones. Increasing the value creates a more reddish picture. Decreasing the value creates a more greenish picture.

Edge Enhancement

■

Increases or decreases the emphasis at object edges.

xvYCC

■

Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks.

Colour Tone

■

Selects a preset white balance, or ‘colour temperature’ setting, to provide either a reddish or bluish hue, dependant upon your personal preference.

Cool: Selects a white balance, or colour



‘temperature’ with a bluish hue. Skin tones may have less warmth but whites will seem brighter. Recommended when watching normal TV broadcasting in a bright room.

Normal: Selects the white balance, or colour



“temperature” with a less bluish, more reddish hue. Suitable for most viewing environments and programs.

Warm1, Warm2, Warm3: Selects a redder, warmer



hue that more closely matches the setting on monitors used in the production of TV and movie content. Recommended when watching movie and dramatic TV content. The lowest setting is best used for black & white content.

Advanced Settings is available in

■

Standard or Movie mode. In PC mode, you can only make

■

changes to Dynamic Contrast, Gamma and White Balance from

among the Advanced Settings items.

Colour is available when Colour

■

Space is set to Custom. In Colour, you can adjust the

■

RGB values for the selected colour.

To reset the adjusted RGB value,

■

select Reset.

xvYCC is available when the

■

picture mode is set to Movie, and the external input is set to HDMI or Component mode.

This function may not be

■

supported depending on your external device.

Picture Options

Colour Tone : Normal ▶

Size : Auto Wide

Screen Mode : 16:9

Digital NR : Auto

HDMI Black Level : Normal

Film Mode : Off

100Hz Motion Plus : Standard

▼

In PC mode, you can only make

■

Move E Enter R Return

changes to the Colour Tone and Size from among the items in

Picture Options. Warm1, Warm2 or Warm3 is

■

only activated when the picture mode is Movie.

English

Using the Menus

Option Description

Picture Options

Picture

Size

■

Changes the screen shape in terms of height and width. Also known as Aspect Ratio.

Auto Wide: Enables the correct picture size to



match the original video signal. 16:9: Sets the picture aspect ratio to fill the screen.



Wide Zoom: Enlarges the middle part of the



picture. Zoom: Magnifies the picture contents horizontally



and vertically. 4:3: Sets the picture aspect ratio to 4:3 with black



or gray side bars. Screen Fit: Matches every pixel of the original



image to a pixel on the TV screen (aka 1:1 pixel mapping) to show the entire image.

Wide Zoom: Press the ► button to select

●

Position, then press the ENTERE button.

Press the ▲ or ▼ button to move the picture up /

down. Then press the ENTERE button. Zoom: Press the ► button to Select Position,

●

then press the ENTERE button. Press the ▲ or

▼ button to move the picture up and down. Then

press the ENTERE button. Press the ► button to Select Size, then press the ENTERE button.

Press the ▲ or ▼ button to magnify or reduce the

picture size in the vertical direction. Then press the

ENTERE button. After selecting Screen Fit in HDMI (1080i / 1080p)

●

or Component (1080i / 1080p) mode: Select Position by pressing the ◄ or ► button. Use the

▲, ▼, ◄ or ► button to move the picture.

Reset: Press the ◄ or ► button to select Reset, then press the ENTERE button. You can initialize the setting.

If you use the Screen Fit function with HDMI 720p

●

input, 1 line will be cut at the top, bottom, left and right as in the Overscan function.

When Double (À, Œ) mode has been set in PIP,

●

the Picture Size cannot be set.

Screen Mode

■

When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it.

16:9: Sets the picture to 16:9 wide mode.



Wide Zoom: Magnify the size of the picture more



than 4:3. Zoom: Magnify the size of the picture vertically on



screen. 4:3: Sets the picture to 4:3 normal mode.



Digital NR → Off / Low / Medium / High / Auto

■

Can reduce the grain effect or level of video snow seen in images coming from poor quality sources.

HDMI Black Level → Normal / Low

■

Adjusts the black level in the picture according to the type of signal being transmitted through HDMI.

Film Mode

■

Applies the appropriate video processing needed to achieve the best picture quality for watching movies.

Off: Turn the Film Mode function off.



Auto1: Improves the picture quality for fast motion



scenes. Auto2: Allows a smoother text motion on fast



motion scenes.

Press the TOOLS button to

■

display the Tools menu. You can also set the size by selecting Tools → Picture Size.

Depending on the input source,

■

the picture size options may vary. The items available may differ

■

depending on the selected mode. In PC Mode, only 16:9 and 4:3

■

mode can be adjusted. Settings can be adjusted and

■

stored for each external device you have connected to an input of the TV.

Temporary image retention may

■

occur when viewing a static image on the set for more than two hours.

This function is available in Auto

■

Wide mode. This function is not available in

■

PC, Component or HDMI mode.

This function is active only when

■

an external device is connected to the TV via HDMI (RGB signals).

Film Mode is supported in TV, AV,

■

COMPONENT(480i / 1080i) and HDMI(480i / 1080i).

English

Using the Menus

Option Description

Picture Options

Picture Reset

Picture

100Hz Motion Plus → Off / Clear / Standard / Smooth

■

/ Custom / Demo

Removes drag from fast scenes with a lot of movement to provide a clearer picture.

If you enable 100 Hz Motion Plus, noise may appear on the screen. If this occurs, set 100Hz Motion Plus to Off.

Off: Switches 100Hz Motion Plus off.



Clear: Sets 100Hz Motion Plus to minimum.



Standard: Sets 100Hz Motion Plus to medium.



Smooth: Sets 100Hz Motion Plus to maximum.



Custom: Adjusts the blur and judder reduction



level to suit your preference.

Blur Reduction: Adjusts the blur reduction level

●

from video sources. Judder Reduction: Adjusts the judder reduction

●

level from video sources when playing films. Reset: Reset the custom settings.

●

Demo: Displays the difference between 100Hz



Motion Plus on and off modes.

Blue Only Mode

■

Helps to adjust the colour and tint controls when used with colour bar test patterns. Recommended for qualified picture alignment specialists only. Available only when the Picture Mode is set to Movie or Standard.

Resets all picture settings to the default values.

Reset Picture Mode: Current picture values return to

■

default settings.

Blue Only Mode is available

■

when the picture mode is set to

Movie or Standard.

Option Description

Auto Adjustment

Screen

Picture (In the PC mode)

Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives.

The function also automatically fine-tunes the settings and adjusts the frequency values and positions.

Coarse / Fine

■

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Finetuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on the centre of screen.

PC Position

■

Adjust the PC’s screen positioning if it does not fit the TV screen.

Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.

Image Reset

■

You can replace all image settings with the factory default values.

Preset: Press the SOURCE button

■

to select PC mode. This function does not work in

■

DVI-HDMI mode.

Press the TOOLS button to

■

display the Tools menu. You can also set the Auto Adjustment by selecting Tools → Auto

Adjustment.

English

Using the Menus

Sound Menu

Option Description

Standard: Selects the normal sound mode.

Mode

Equalizer

SRS TruSurround HD

Audio Language

Audio Format

Audio Description

Auto Volume

Speaker Select

■

Music: Emphasizes music over voices.

■

Movie: Provides the best sound for movies.

■

Clear Voice: Emphasizes voice over other sounds.

■

Custom: Recalls your customized sound settings.

■

The sound settings can be adjusted to suit your personal preferences.

Mode: Selects the sound mode among the predefined

■

settings. Balance L/R: Adjusts the balance between the right and

■

left speaker. 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth

■

Adjustment): To adjust the level of different bandwidth frequencies.

Reset: Resets the equalizer settings to the default values.

■

SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

You can change the default value for audio languages. Displays the language information for the incoming stream.

While viewing a digital channel, this function can be

■

selected. You can only select the language among the actual

■

languages being broadcast.

When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.

While viewing a digital channel, this function can be

■

selected. The Audio Format appears according to the broadcasting

■

signal.

This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control the volume.

Audio Description

■

Turn the audio description function on or off.

Volume

■

You can adjust the audio description volume.



Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

When you watch TV with it connecting to a Home theatre, turn the TV speakers off so you can listen to sound from the Home theatre’s (external) speakers.

External Speaker: Used to listen to the sound of the

■

External (Home Theatre) Speakers. TV Speaker: Used to listen to the sound of the TV

■

Speakers.

Sound

Volume is active when Audio Description is set

to On. While viewing a Digital channel, this function can

be selected.

Sound

Mode : Custom ▶

Equalizer SRS TruSurround HD : Off

Audio Language : ---Audio Format : ---Audio Description

Auto Volume : Off Speaker Select : TV Speaker

Press the TOOLS button to

■

display the Tools menu. You can also configure the sound mode by selecting Tools → Sound Mode.

Press the TOOLS button to

■

display the Tools menu. You can also set the SRS TruSurround HD by selecting Tools → SRS TS HD.

The volume buttons and MUTE

■

buttons do not operate when the

Speaker Select is set to External Speaker.

If you select External Speaker

■

in the Speaker Select menu, the sound settings will be limited.

English

Using the Menus

Selecting the Speaker

TV’s Internal Speakers

RF / AV / Component / PC / HDMI RF / AV / Component / PC / HDMI

TV Speaker Sound Output Sound Output

External Speaker

Video No Signal Mute Mute

Mute Sound Output

Audio Out (Optical, L/R Out) to

Sound System

Sound

Option Description

Sound Select

Sound Reset

When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.

You can select this option when PIP is set to On.

■

You can restore the Sound settings to the factory defaults. Reset Sound Mode: Current sound values return to default

settings.

Selecting the Sound Mode

You can set the sound mode in the Tools menu. When you set to Dual l ll, the current sound mode is displayed on the screen.

Audio Type Dual 1 / 2 Default

Stereo

NICAM

Stereo

If the stereo signal is weak and an automatic switching occurs, then switch to the mono.

■

This function is only activated in stereo sound signal. It is deactivated in mono sound

■

signal. This function is only available in TV mode.

■

Mono MONO

Stereo STEREO ↔ MONO

Dual DUAL 1 ↔ DUAL 2 DUAL 1

Mono MONO

Stereo MONO ↔ STEREO

Dual

MONO ↔ DUAL 1

DUAL 2

Automatic change

DUAL 1

Sound Reset

Cancel sound reset.

Reset All Reset Sound Mode Cancel

L Move E Enter R Return

Press the TOOLS button to

■

display the Tools menu. You can also set the sound of the sub picture by selecting Tools → PIP

→ Sound Select.

English

Using the Menus

Setup Menu

Option Description

Language Time Clock

You can set the menu language.

❑

Setting the clock is necessary in order to use the various timer features of the TV. If you disconnect the power cord, you have to set the clock again.

Clock Mode

■

You can set up the current time manually or automatically.

Auto: Set the current time automatically using the time



from the digital broadcast. Manual: Set the current time to a manually specified time.



Clock Set

■

You can set the current time manually.

This function is only available when Clock Mode is set



to Manual. You can set the day, month, year, hour and minute



directly by pressing the number buttons on the remote control.

Sleep Timer

❑

The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).

To cancel the Sleep Timer function, select Off.

■

Timer 1 / Timer 2 / Timer 3

❑

Three different on / off timer settings can be made. You must set the clock first.

On Time

■

Set the hour, minute, and activate / inactivate. (To activate timer with the setting you’ve chosen, set to

Activate.)

Off Time

■

Set the hour, minute, and activate / inactivate. (To activate timer with the setting you’ve chosen, set to

Activate.)

Volume

■

Set the desired volume level.

Source → TV / USB

■

You can select the TV or USB device content to be played when the TV turns on automatically. Select TV or USB. (Make sure that an USB device is connected to your TV.)

Antenna (when Source is set to TV)

■

Select ATV or DTV.

Channel (when Source is set to TV)

■

Select the desired channel.

Contents (when Source is set to USB)

■

You can select a folder on the USB Device with music or photo files to be played when the TV turns on automatically.

If the folder name is too long, the folder cannot be



selected. If you are using two of the same type USB device, be



sure the folder names are different so the correct USB is read.

Repeat

■

Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.

When Manual is selected, press the ► button to select



the desired day of the week. Press the ENTERE button over the desired day and the c mark will appear.

You can set the hour, minute and channel by pressing the



number buttons on the remote control.

Setup

Plug & Play

Setup

Language : English ▶

Time

Game Mode : Off BD Wise : On Network Type : Cable

Network Setup Child Lock : On Change PIN

The current time will appear

■

every time you press the INFO button.

Depending on the broadcast

■

station and signal, the auto time may not be set correctly. If this occurs, set the time manually.

The Antenna or cable must be

■

connected in order to set the time automatically.

Press the TOOLS button to

■

display the Tools menu. You can also set the sleep timer by selecting Tools → Sleep Timer.

On Time

00 00 Inactivate

Off Time

00 00 Inactivate

Volume

Repeat

Once

When there is only one photo file

■

Timer 1

Source Antenna Channel

TV ATV 0

Sun Mon Tue Wed Thu Fri Sat

Move U Adjust E Enter R Return

in the USB the Slide Show will not play.

Auto Power Off

■

When you set the timer on, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer on mode and prevents overheating, which may occur if a TV is on for too long time.

+ 77 hidden pages