Samsung BN68-01783B-00 User Manual

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country Customer Care Centre  Web Site

AUSTRIA 0810 - SAMSUNG(7267864, € 0.07/min) www.samsung.com/at BELGIUM 02 201 2418 www.samsung.com/be

CZECH REPUBLIC

DENMARK 8 - SAMSUNG(7267864) www.samsung.com/dk EIRE 0818 717 100 www.samsung.com/ie ESTONIA 800-7267 www.samsung.ee FINLAND

FRANCE

GERMANY 01805 - SAMSUNG(7267864, € 0.14/Min) www.samsung.de HUNGARY 06 - 80 - SAMSUNG(7267864) www.samsung.com/hu ITALIA 800 - SAMSUNG(7267864) www.samsung.com/it KAZAKHSTAN 8-10-800-500-55-500 www.samsung.com/kz_ru KYRGYZSTAN 00-800-500-55-500 LATVIA 8000-7267 www.samsung.com/lv LITHUANIA 8-800-77777 www.samsung.lt LUXEMBURG 02 261 03 710 www.samsung.com/lu NETHERLANDS 0900 - SAMSUNG(7267864, € 0.10/Min) www.samsung.com/nl NORWAY 3 - SAMSUNG(7267864) www.samsung.com/no

POLAND

PORTUGAL 808 20 - SAMSUNG(7267864) www.samsung.com/pt RUSSIA 8-800-555-55-55 www.samsung.ru SLOVAKIA 0800 - SAMSUNG(7267864) www.samsung.com/sk SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es SWEDEN 075 - SAMSUNG(726 78 64) www.samsung.com/se Switzerland 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.com/ch TADJIKISTAN 8-10-800-500-55-500 Turkey 444 77 11 www.samsung.com/tr U.K 0845 SAMSUNG(7267864) www.samsung.com/uk UKRAINE 8-800-502-0000 www.samsung.ua UZBEKISTAN 8-10-800-500-55-500 www.samsung.com/kz_ru

800 - SAMSUNG (800-726786) www.samsung.com/cz Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8

30 - 6227 515 3260 'dites' SAMSUNG (€ 0,15/Min)

0825 08 65 65 (€ 0.15/Min)

0 - 801 - 1SAMSUNG(172678) 022 - 607 - 93 - 33

www.samsung.com/fi

www.samsung.com/fr

www.samsung.com/pl

Plasma TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

BN68-01783B-00

www.samsung.com/global/register

Model Serial No.

User Instructions

 Screen Image retention

Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

 Height

The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there.

 Heat on the top of the PDP TV

The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product.

 The product is making a ‘cracking’ noise.

A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding environment such as temperature or humidity. This is normal and not a defect of the unit.

 Cell Defects

The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

 Avoid operating the TV at temperatures below 5°C(41°F)  A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the PDP TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

 Afterimage on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

 Warranty

- Warranty does not cover any damage caused by image retention.

- Burn-in is not covered by the warranty.

 Installation

Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substance and where it operates continually such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.

Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. (See back cover for more information.)

English - 2

Contents

English

General Information

 User Instructions ............................................. 2

 Checking Parts ................................................ 4

 Using the Stand-Base .....................................4

 Control Panel ................................................. 5

 Connection Panel ............................................ 6

 Viewing the Remote Control ...........................8

Operation

 Switching Your Television On and Off .............9

 Viewing the Menus .......................................... 9

 Plug & Play Feature ......................................10

 Using the TOOLS Button ..............................12

 Viewing External Signal Sources ..................12

 Editing Device Names ................................... 13

Channel Control

 Setting the Country .......................................13

 Storing Channels Automatically .................... 14

 Storing Channels Manually ...........................15

 Viewing the EPG (Electronic Programme

Guide) Information ....................................... 17

 Viewing All Channels .................................... 18

 Erasing and Adding Channels ....................... 19

 Setting Your Favourite Channels ..................20

 Reserving a Program (Time Viewing) ...........21

 Conﬁrming a Viewing Reservation ................ 22

 Assigning Names to Channels ...................... 23

 Sorting the Stored Channels - Analogue ....... 24

 Selecting and Deselecting All Channels .......24

 Storing Channels in Memory (Auto Store) ....25

 Setting the Channel Mode ............................ 25

 Locking Channels ......................................... 26

 Fine Tuning Analogue Channels ................... 26

 Viewing Signal Information ........................... 27

Picture Control

 Changing the Picture Standard ..................... 27

 Customizing the Picture Settings ..................28



Conﬁguring Detailed Settings on the Picture

 Picture Options ............................................. 30

 Resetting the Picture Settings to the Factory

Defaults ......................................................... 32

... 28

Sound Control

 Sound Features ............................................ 33

 Selecting the Sound Mode

(depending on the model) ............................. 35

 Connecting Headphones (Sold separately) ..35

Function Description

 Time Features ............................................... 36

 Language / Change PIN / Parental Lock /

Subtitle / Teletext Language / Preference / Melody / Entertainment / Energy Saving /

PIP ............................................................... 37

 Upgrading the Software ................................40

 Common Interface ........................................ 41

PC Display

 Setting up Your PC Software

(Based on Windows XP) ............................... 42

 Input Mode (PC) ............................................ 43

 Setting the PC ............................................... 44

WISELINK

 Using the WISELINK Function ...................... 46

 Using the Photo List ...................................... 47

 Viewing a Photo or Slide Show ..................... 53

 Using the Music List ...................................... 57

 Playing a Music File ...................................... 62

 Using the Setup Menu .................................. 64

About Anynet

 What is Anynet+? .......................................... 65

 Connecting Anynet+ Devices ........................ 65

 Setting Up Anynet+ ....................................... 66

 Scanning and Switching between Anynet+

Devices ......................................................... 67

 Recording ...................................................... 68



Listening through a Receiver (Home theater) ..

 Check Points before Requesting Service ..... 69

Appendix

 Teletext Feature (depending on the model) .. 70

 Wall Mount Kit Speciﬁcations (VESA) ........... 72

 Auto Wall - mount adjustment

(Sold separately) (PS50A676) ...................... 73

 Preparing before installing Wall- Mount on the

wall ................................................................ 74

 How to assemble the Stand-Base

(depending on the model) ............................. 74

 Securing the TV to the Wall ..........................75

 Troubleshooting ............................................ 76

 Speciﬁcations ................................................ 77

Symbols

Press

English - 3

¯

Important

Note

Checking Parts

Owner’s Instructions Remote Control/

Cover-Bottom / Screws (2ea)

(Refer to page 74)

AAA Batteries

Ferrite Core for

Power Cord

Power Cord Cloth-Clean Warranty Card/

Ferrite Core for

S-Video

Ferrite Core for

Component

Sold Separately

Antenna Cable Component Cables Audio Cables PC Cable

Scart Cable PC Audio Cable HDMI Cable HDMI/DVI Cable

Ferrite Core

(Power Cord, S-Video, Component) The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug.

Power Cord (PS50A676)

Power Cord (PS58A676)

Safety Guide Manual

(Not available in all

locations)

Holder-Ring (4ea) (Refer to page 74)

S-Video

Cable

Component

Cable

Using the Stand-Base

Two or more people

¯



should carry the PDP. Never lay the PDP on the floor because of possible damage to the screen. Always keep the PDP upright.

The PDP can rotate 20

degrees in right and left directions.

-20° ~ 20°

English - 4

Control Panel

Front Panel

The product colour and shape may vary depending on the model.

Front Panel buttons

Touch each button to operate.

SOURCE

Toggles between all the available input sources

(TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2/DVI, HDMI3, HDMI4, USB).

In the on-screen menu, use this button as

you would use the ENTER button on the remote control.

Press to see an on-screen menu of your TV’s

features.

– +

Press to increase or decrease the volume. In

the on-screen menu, use the – + buttons as you would use the ◄ and ► buttons on the remote control.

Press to change channels. In the on-screen menu, use the buttons as you would use the ▲ and ▼ buttons on the remote control.

Power Indicator

Blinks and turns off when the power is on and lights up in stand-by mode.

POWER

Press to turn the TV on and off.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

Speakers

English - 5

Connection Panel

Rear Panel

Cable Television

Network

432685

The product colour and shape may vary depending on the model.

Whenever you connect an audio or video system to your set, ensure that all elements are





Audio (AUDIO L/R) and video (Y/P

Input/Output Specification

Connector

switched off.

When connecting an external device, match the colour of the connection terminal to the cable.

POWER IN

Connect the supplied power cord.

COMPONENT IN

B/PR) inputs

for Component.

PC IN(PC) / AUDIO

Connect to the video and audio output jack on your PC.

EXT 1, EXT 2

Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

Input Output

Video Audio(L/R) RGB

EXT 1   

EXT 2  

Video + Audio(L/R)

Only TV or DTV

output is available.

Output you can

choose.

DIGITAL AUDIO OUT (OPTICAL)

Connect to a Digital Audio Component.

AUDIO OUT(AUDIO R/L)

Connect RCA audio signals from the TV to an external source, such as Audio equipment.

SERVICE

− Connector for service.

− Connect the serial jack between the electro-motion wall mount bracket and your TV when you want to adjust the TV viewing angle using your remote control.

English - 6

Continued...

HDMI IN 1, 2, 3

- No additional Audio connection is needed for an HDMI to HDMI connection.

- When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

What is HDMI?

- “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio.

- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

Side Panel

DVI IN(HDMI2) AUDIO L/R

DVI audio outputs for external devices.

ANT IN

75Ω Coaxial connector for Aerial/Cable Network.

Supported modes for HDMI/DVI and Component

480i 480p 576i 576p 720p HDMI/DVI 50Hz X X X O O HDMI/DVI 60Hz X O X X O

Component O O O O O

1080i

O O O

1080p

O O O

¯ The product colour and shape may vary depending on the model.

COMMON INTERFACE Slot

Insert CI (Common Interface) card into the slot. (refer to page 41)

− When ‘CI Card’ isn’t inserted in some channels, “Scramble Signal” is displayed on the screen.

− The pairing information containing a telephone number, CI CARD ID, Host ID,and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

− When the channel information configuration has finished, the message “Updating Completed” is displayed, indicating that the channel list is now updated.

¯ Insert the CI-Card in the direction marked

on it.

HDMI IN 4

Connect to the HDMI jack of a device with HDMI output.

WISELINK

Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3).

S-VIDEO or VIDEO / AUDIO L/R

Video (S-Video or Video) and audio inputs for external devices, such as a camcorder or VCR.

HEADPHONES JACK

You can connect a set of headphones if you wish to watch a television programme without disturbing the other people in the room.

Prolonged use of headphones at a high

¯

volume may damage your hearing.

English - 7

Viewing the Remote Control

The performance of the remote control may be affected by bright light.

POWER button

(turns the TV on and off)

Selects the TV mode

directly.

Number buttons for direct

channel access

One or more digit channel

selection.

Temporary sound switch-off

Volume increase

Volume decrease

Electronic Program Guide

(EPG) display

Use to quickly select

frequently used functions.

Control the cursor in the

Use to see information on

the current broadcast

Use these buttons in the

Channel list and WISELINK, etc.

Press to select the optional

display and sound modes for sports, cinema and games.

Use these buttons in the

Channel list, WISELINK and Anynet+.

ON/OFF

Press to backlight the

buttons on the remote. This function is convenient for using at night or when the room is dark. (Using the remote control with the ON/OFF( to On will reduce the battery usage time.

Previous channel

Next channel

Previous channel

Available source selection

(

Displays the main on-screen

)

This function enables you to

view and play photo (JPEG) and audio files (MP3) from an external device. (See page 47 (JPEG), 57 (MP3))

Returns to the previous

) light button set

Exit the on-screen menu

Picture size selection

Use this when connecting

a SAMSUNG DMA (Digital Media Adapter) device through an HDMI interface and switching to DMA mode.(The DMA button is optional.) For more information on the operating procedures, refer to the user manual of the DMA.

This button is available

¯

when “Anynet+(HDMICEC)" is “On” (see page

66)

Digital subtitle display

Channel control button

(Refer to pages 18~20)

Teletext Functions

(Refer to page 70)

Exit from the teletext display

(depending on the model)

Teletext store

Teletext size

Teletext reveal

Fastext topic selection

Teletext display/mix both

teletext information and the normal broadcast

Teletext sub page

P :Teletext next page

P :Teletext previous page

Teletext mode selection

(LIST/FLOF)

(

Teletext index

Teletext hold

Teletext cancel

Continued...

English - 8

Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the

figure.

2 Install two AAA size batteries.

 Make sure to match the “+” and “–” ends of the batteries with the

¯

3 Close the cover as shown in the figure.

¯

If the remote control doesn’t work! Check the following:

¯

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power cut, or is the power cord unplugged?

5. Is there a special fluorescent light or a neon sign nearby?

diagram inside the compartment.

 Using the remote control with the ON/OFF( ) light button set to

On will reduce the battery usage time.

Remove the batteries and store them in a cool and dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)

Switching Your Television On and Off

The mains lead is attached to the rear of the television. 1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.

¯

2 Press the

the remote control to switch the television on. The channel that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing Channels Automatically” on page 14 or “Storing Channels Manually” on pages 15~16.

If the television is initially powered on, several basic customer settings proceed automatically.

¯

Refer to “Plug & Play Feature” on pages 10~11.

3 To switch the television off, press the

the POWER button on the remote control.

4 To switch the TV on, press the

button or number buttons on the remote control.

(Power) button (On/Off) on the front of the television or press the POWER button on

(Power) button (On/Off) on the front of the television or press

(Power) button (On/Off) on the front of the TV or press the POWER

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen. Its left side has six icons: Picture, Sound, Channel,

Setup, Input, and Application

2 Press the ▲ or ▼ button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

3 Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4 Press the ▲/▼/◄/► button to change the selected items.

Press the RETURN button to return to the previous menu.

5 Press the EXIT button to exit from the menu.

English - 9

Picture

Mode : Standard

Cell Light : 7 Contrast : 95 Brightness : 45 Sharpness : 50 Colour : 50

Tint (G/R) : G50/R50

Detailed Settings

Plug & Play Feature

When the television is initially powered on, several basic customer settings proceed automatically and subsequently.The following settings are available.

If you accidentally select the wrong country for your TV, the characters on the screen may be wrongly



displayed. Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2)



digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries.

The Screen Saver is activated if there is no remote

control key input for longer than 1 minute while Plug & Play is running.

Valitse valikkokieli, myymälädemo, kanavat ja kellonaika.

Plug & Play

1 If the television is in standby mode, press the POWER

button on the remote control. The message Valitse valikkokieli, myymälädemo, kanavat ja kellonaika. is displayed.

2 Press the ENTER button, Select the OSD Language

menu is automatically displayed. Press the ENTER button.

3 Select the appropriate language by pressing the ▲ or ▼

button. Press the ENTER button to confirm your choice. The message Select ‘Home Use’ when installing this

TV in your home. is displayed.

4 Press the ◄ or ► button to select Store Demo or Home

Use, then press the ENTER button.

The default selection is Home Use.

¯

We recommend setting the TV to Home Use mode

¯

for the best picture in your home environment. Store Demo mode is only intended for use in retail

¯

environments. If the unit is accidentally set to Store Demo mode

¯

and you want to return to Home Use (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds. Make sure that the antenna is connected to the TV.

¯

Hyvaksy

Plug & Play

Select the OSD Language

Menu Language : English

Plug & Play

Select 'Home Use' when installing this TV in your home.

Store Demo

Plug & Play

Select Country. Country : Finland ►

Plug & Play

Select the Antenna source to memorize.

Digital & Analogue Digital Analogue

▲

Nederlands

English

Eesti

▼

Move

Home Use

Move Enter

Enter

Start Start

Start

Enter

5 The Country menu is displayed. Press the ENTER

button, then press the ▲ or ▼ button to select the required country. Press the ENTER button.

6 Press the ▲ or ▼ button to select the channel source to

memorize. Press the ENTER button to select Start.

Select the Antenna source to memorize.

Cable Air

Digital & Analogue: Digital and Analogue channels. Digital: Digital channels. Analogue: Analogue channels.

7 Press the ▲ or ▼ button to memorize the channels of the

selected connection, then press the ENTER button.

Air: Air antenna signal.

¯

Cable: Cable antenna signal.

Auto Store in progress. Digital Channels : 0 Analogue Channels : -- 143MHz

The channel search will start and end automatically. Press the ENTER button at any time to interrupt the memorization process.

English - 10

Plug & Play

Move

Plug & Play

Stop

EnterMove

Start

Enter Skip

Continued...

Skip

To stop the search before it has finished, press the

¯

ENTER button with stop selected. Press the ◄ or ► button to select Yes, then press the ENTER button. The Auto Store menu then reappears. Press the ENTER button when channel memorization is completed.

8 The message Set the Clock Mode is displayed. Press

the ENTER button. Press the ▲ or ▼ button to select

Manual for setting the current time manually, then press the ENTER button. The message Set current date and time. is

displayed.

If you select Auto, the message Enjoy your viewing is

¯

displayed. If you have received a digital signal, the time will be set automatically.

9 Press the ◄ or ► button to move to Day, Month, Year, Hour

or Minute. Set the date and time you want by pressing the ▲ or ▼ button, then press the ENTER button.

You can set the Day, Month, Year, Hour and Minute

¯

directly by pressing the number buttons on the remote control.

10 The message Enjoy your viewing. is displayed. When you

have finished, press the ENTER button.

Even if the ENTER button is not pressed, the message

¯

will automatically disappear after several seconds.

Plug & Play

Auto Store is completed.

Digital channels: 20 Analogue channels: 36

Plug & Play

Set the Clock Mode.

Clock Mode : Auto

Set current date and time

Day

Hour

Enjoy your viewing.

Auto

Manual

Plug & Play

Month

Minute

Plug & Play

Enter

Move

Skip

Enter Skip

Year 2008

SkipEnterAdjustMove

If you want to reset this feature …

Press the MENU button to display the menu.

1 2 Press the ▲ or ▼ button to select Setup, then press the

ENTER button.

3 Press the ENTER button again to select Plug & Play. 4 Enter your 4 digit PIN number. The default PIN number of a

new TV set is “0-0-0-0”.

For further details on setting up options, refer to the

¯

pages 10-11.

The Plug & Play feature is only available in the TV

¯

mode.

Setup

Plug & Play ►

Language : English Time Child Lock : On Change PIN Parental Lock Subtitle

Teletext Language : ----

Plug & Play

If you enter PIN, ‘Plug & Play’ will be started. All channel settings and user preferences will be lost.

0~9

Enter PIN Return

English - 11

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The “TOOLS” menu changes depending on which external input mode you are viewing.

1 Press the TOOLS button.

The Tools menu will appear.

2 Press the ▲ or ▼ button to select a menu, then press the

ENTER button.

3 Press the ▲/▼/◄/►/ENTER buttons to display, change, or

use the selected items. For a more detailed description of each function, refer to the corresponding page.

• Anynet+ (HDMI-CEC), see page 66

• Picture Size, see page 31

• Picture Mode, see page 27

Anynet+(HDMI-CEC) Picture Size : Auto Wide Picture Mode : Standard Sound Mode : Standard Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual I II : Mono

Tools

Move Enter Exit

• Sound Mode, see page 33

• Sleep Timer, see page 36

• SRS TS XT, see page 33

• Energy Saving, see page 39

• Dual I II, see page 35

• PIP, see page 39

• Auto Adjustment, see page 44

Viewing External Signal Sources

You can switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box, and the TV source.

1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Input, then press the

ENTER button. 3 Press the ENTER button again to select Source List. 4 Press the ▲ or ▼ button to select the signal source, then

press the ENTER button. Available signal sources: TV, Ext1, Ext2, AV, S-Video,

Component, PC, HDMI1, HDMI2/DVI, HDMI3, HDMI4,

USB

You can choose only those external devices that are

connected to the TV.

Using the Color buttons on the remote with the Source list.

Input

Ext.1 Ext.2

Source List

Edit Name

Source List

----

• Red (Refresh): Refreshes the connecting external

devices.

•

TOOLS (Option): Displays the Edit Name and

Information menus.

You can select these options simply by pressing the

SOURCE button on the remote control.

To watch television programme again, press the TV/DTV

button and select the channel number required.

English - 12

AV S-Video Component

Refresh Option

----

Editing Device Names

You can give a name to the external source.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Input, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Edit Name, then press

the ENTER button.

4 Press the ▲ or ▼ button to select the external source to

be edited, then press the ENTER button.

5 Select the required device by pressing ▲ or ▼, then press

the ENTER button. Available device names:

VCR, DVD, Cable STB, Satellite STB, PVR STB, AV Receiver, Game, Camcorder, PC, TV, IPTV, Blu-Ray, HD DVD, DMA.

6 Press the EXIT button to exit.

Input

Ext.1 : Ext.2 : AV : S-Video : Component : PC : HDMI1 :

Ext 1 :

Ext 2 : AV : S-Video : Component : PC : HDMI1 :

Source List

Edit Name ►

Edit Name

----

►

----

Enter ReturnMove

Edit Name

----

VCR

----

DVD

----

Cable STB

----

Satellite STB PVR STB

Setting the Country

1 Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

2 Press the ▲ or ▼ button to select Country, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Analogue Channel or

Digital Channel, then press the ENTER button.

If a channel is locked using the Child Lock function,

®

the PIN input window appears (refer to page 26). Enter your 4 digit PIN number.

4 Select the appropriate country by pressing the ▲ or ▼

button. Press the ENTER button to confirm your choice.

English - 13

Enter ReturnMove

Channel

Country ►

Auto Store Manual Store Full Guide Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch.

Storing Channels Automatically

You can scan for the frequency ranges available to you (availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Auto Store, then press

the ENTER button.

4 Press the ▲ or ▼ button to select the channel source to

memorize. Press the ENTER button to select Start.

Digital & Analogue: Digital and Analogue channels.



Digital: Digital channels. Analogue: Analogue channels.

5 Press the ▲ or ▼ button to memorize the channels of the

selected connection, then press the ENTER button.

Air: Air antenna signal.



Cable: Cable antenna signal.

Scans for all channels with active broadcast stations



and stores them in the TV’s memory. If you want to stop Auto Store, press the ENTER button.



The Stop Auto Store? message will be displayed. Select Yes by pressing the ◄ or ► button, then press the ENTER button.

Digital & Analogue / Digital 6 The update procedures differ depending on the selected

Country.

Update the channel list by selecting an appropriate option.

 When the “Country” was set to “Finland”

Press the ▲ or ▼ button to select Cable or Air. Press the ENTER button.

Press the ENTER button to select Start.

- Cable: Scans cable channels.

- Air: Scans aerial channels.

 This product cannot scan both cable and aerial channels

at the same time.

 When it has finished, the number of scanned services will

be displayed.

 The existing favourite channel list will not be deleted

when the channel list is updated.

 When the “Country” was set to “Sweden”, or “Denmark”

Press the ▲ or ▼ button to select Cable or Air. Press the ENTER button.

When selecting “Cable”:

- Frequency: Displays the frequency for the channel. (Differs in each country)

- Modulation: Displays available modulation values.

- Symbol Rate: Displays available symbol rates.

- Network ID: Displays the network identification code. Press the red button to start the scan for digital services. When it has finished, channels are updated in the channel list.

When selecting “Air”: Press the ENTER button to select Start.

 When the “Country” was set to “Norway”

Press the ENTER button to select Start.

7 Press the EXIT button to exit.

When there is a locked channel by Child Lock setting, PIN input screen appears.

(refer to page 26)

English - 14

Channel

Select the Antenna source to memorize.

Digital & Analogue

Digital

Analogue

Select the Antenna source to memorize.

Cable

Air

Auto Store in progress. Digital Channels : 0 Analogue Channels : 0

Auto Store is completed. Digital Channels : 20 Analogue Channels : 36

Country

Auto Store

Manual Store Full Guide Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch.

Fine Tune

Network ID

999

Modulation

QAM 64

Auto Store

Move

Auto Store

Move

Auto Store

Stop

Auto Store

►

Enter Return

Frequency

143000kHz

Symbol Rate

6875 kS/s

143 MHz

Enter Return

Enter

Start

ReturnAdjustMove

Return

Storing Channels Manually

You can store television channels, including those received via cable networks. When storing channels manually, you can choose:

 Whether or not to store each of the channels found.  The programme number of each stored channel which you wish to identify.

1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

Channel

3 Press the ▲ or ▼ button to select Manual Store, then

press the ENTER button.

4 Select the required option by pressing the ▲ or ▼ button,

then press the ENTER button.

5 When you are satisfied with your setting, press the ENTER

button.

6 Press the EXIT button to exit. Digital Channel

 When the “Country” was set to “Finland”

Press the ▲ or ▼ button to select Cable or Air, then press

Channel

the ENTER button.

When selecting “Cable”:

- Frequency: Displays the frequency for the channel.

(Differs in each country)

- Modulation: Displays available modulation values.

- Symbol Rate: Displays available symbol rates. Press the ENTER button to start the scan for digital services. When it has finished, channels are updated in the channel list.

When selecting “Air”:

- Channel: Channel “21” to “69” in sequence are displayed

(depending on the country)

- Frequency: The frequency available in the Channel

group is displayed.

- Bandwidth: The available bandwidths are 8 MHz.

Select the Antenna source to memorize.

Cable Air

Press the ENTER button to start the scan for digital services. When it has finished, channels are updated in the channel list.

 When the “Country” was set to “Sweden”, “Denmark”,

or “Norway”

- Channel: Channel “21” to “69” in sequence are displayed

(depending on the country)

- Frequency: The frequency available in the Channel

group is displayed.

- Bandwidth: The available bandwidths are 8 MHz. Press the ENTER button to start the scan for digital services. When it has finished, channels are updated in the channel list.

Country Auto Store

Manual Store ►

Full Guide Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch.

Fine Tune

Signal Information

Country Auto Store

Manual Store

Full Guide Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Fine Tune Signal Information

Manual Store

Move

Manual Store

Frequency

177000kHz

Channel

Modulation

QAM 16

AdjustMove

Manual Store

Frequency

178750 KHz

Digital Channel Analogue Channel

Enter

Start

Return

Symbol Rate

4000 kS/s

Return

Bandwidth

8 MHz

English - 15

AdjustMove

Enter

Return

Continued...

Analogue Channel  Programme (Programme number to be assigned to a

channel)

Press the ▲ or ▼ button until you find the correct number.

You can also select the channel number directly by

pressing the numeric buttons (0~9).

 Colour System: Auto/PAL/SECAM/NTSC4.43

Programme

Channel

Manual Store

Colour SystemBGSound System

AUTO

858 MHz

AdjustMove

Store

Return

Press the ▲ or ▼ button to select the required colour standard.

 Sound System: BG/DK/I/L

Press the ▲ or ▼ button to select the required sound standard.

 Channel ( When you know the number of the channel to be stored)

Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). Press the ► button, then press the ▲ or ▼ button to select the required number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

If there is abnormal sound or no sound, re-select the sound standard required.

 Search (When you do not know the channel numbers)

Press the ▲ or ▼ button to start the search. The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen.

 Store (When you store the channel and associated programme number)

Set to OK by pressing the ENTER button.

Channel mode

- P (Programme mode): When completing tuning, the broadcasting stations in your area have been

assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.

C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.

S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.

English - 16

Viewing the EPG (Electronic Programme Guide) Information

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available.

1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Full Guide, Mini Guide

or Default Guide then press the ENTER button.

 Full Guide

For the six channels indicated in the left-hand column, displays the Current programme and the Next programme information.

One hours of programme information is displayed

which may be scrolled forwards or backwards in time.

 Mini Guide

The information of each program is displayed by each line on the current channel Mini Guide screen from the current program onwards according to the program starting time order.

Select a programme by pressing the ▲/▼/◄/► button. If the next progrmme is selected, it is scheduled with the clock icon

▲/▼/◄/►,

(ENTER)

displayed. If the ENTER button is pressed again, press the ▲/▼/◄/► button to select Cancel Schedules, the scheduling is canceled with the clock icon gone. For details about scheduling programmes, refer to the section.

RED

Toggle between the Mini Guide or Full Guide.

Full Guide: Scroll backwards quickly

GREEN

(24 hours).

Mini Guide: Display next page quickly.

Full Guide: Scroll forwards quickly

YELLOW

(24 hours). Mini Guide: Display previous page quickly.

Channel

Full Guide

Today 12:00 - 13:00 13:00 - 14:00 ▲801 BBC NEWS 24 BBC Ne.. BBC News 802 BBC ONE BBC Ne.. Departure Lounge 803 BBC THREE 804 BBC THREE 805 BBCi ▼806 Canal 7

Watch

Channel

Auto Store Manual Store

Full Guide

Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch.

Fine Tune Signal Information

DTV 805 BBCi

BBCi 18:00~0:00 BBCi-featuring news, sport, weather and TV..

This is BBC THREE This Weakest L.. BBCi

information

INFO

Manual Store Full Guide

Mini Guide

Default Guide : Mini Guide Channel List Channel Mode : Added Ch.

Fine Tune

Signal Information

Mini Guide

18:08 Fri 5 Aug

The 7 O’..

Tsunami..

No Information

+24 Hours

Exit

BLUE Exit the guide.

INFO button for the detailed

information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information

INFO

(HD/SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information. “…” will be appeared if the summary is long.

 Default Guide: Mini Guide/Full Guide

Press the ▲ or ▼ button to select Mini Guide or Full Guide. Press the ENTER button. The selected guide menu

is displayed.

You can also display the guide menu simply by

pressing the GUIDE button.

English - 17

Mini Guide DTV 801 BBC NEWS 24 18:00 BBC News 18:30 Sportsday 19:00 BBC News

Watch

Channel

information

INFO

Full Guide Exit

Full Guide Mini Guide

Mini Guide

Default Guide

Channel List Channel Mode : Added Ch. Fine Tune Signal Information

: Mini GuideMini Guide

Full Guide

Viewing All Channels

Show all currently available channels. To use the Channel List function, first run Auto Program.

1 Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

2 Press the ◄ button to select Added Channels.

3 Press the ▲ or ▼ button to select All Channels, then press

the ENTER button. Shows all currently available channels.

4 Press the ▲ or ▼ button to select a channel to view, then

press the ENTER button.

Channel

Added Channels

All Channels

Mini Guide Default Guide :Mini Guide

Channel List

Channel Mode : Added Ch.

Fine Tune

Signal Information

824 UKTV Gold 825 UKTV style

1 C --

2 C -3 C -4 C -5 C -6 C -7 C -8 C --

All Channel Type Zoom

824 UKTV Gold 825 UKTV style

1 C --

2 C -3 C -4 C -5 C -6 C -7 C -8 C --

All Channel Type Zoom

Select Option

Press the CH LIST button on the remote control to bring up the channel lists.

Using the Color buttons on the Remote with the Channel List

• Red (Channel Type): Toggle between your TV, Radio, Data/ Other and All.

• Green (Zoom): Enlarges or shrinks a channel number.

• Yellow (Select): Selects multiple channel lists.

•

TOOLS(Option): Displays the Delete(or Add), Add to

Favourite(or Delete from Favourite), Lock(or Unlock), Timer Viewing, Edit Channel Name, Sort, Edit Channel Number, Select All, Deselect All or Auto Store menu. (The Options menus

may differ depending on the situation.)

A gray-colored channel indicates the channel has been deleted. The Add menu only appears for

deleted channels.

A channel marked with ♥ mark means the channel has been set as a Favourite.

The Delete from Favourite menu only appears for channels with the ♥ mark.

English - 18

Erasing and Adding Channels

You can delete or add a channel to display the channels you want.

Channel

1 Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

2 Press the ◄ button to select Added Channels.

3 Press the ▲ or ▼ button to select All Channels.

Shows all currently available channels. Press the ENTER button.

All Channels

4 Press the ▲ or ▼ button to select a channel to delete, then

press the TOOLS button.

5 Press the ENTER button to select Delete.

All deleted channels will be shown on Added Channels menu.

6 Press the EXIT button to exit.

You can also add a channel to the All Channels menu

¯

in the same manner. A channel must be deleted before it can be added

¯

back to the Added Channels list. To Add (Restore) a channel back to the Added

¯

Channel List, follow steps 1-3 above, press the ▲ or

All Channels

▼ button to select a channel to add, the press the TOOLS button. Press the ENTER button to select Add.

Mini Guide Default Guide : Mini Guide

Channel List

Channel Mode : Added Ch.

Fine Tune

Signal Information

824 UKTV Gold 825 UKTV style

1 C --

2 C -3 C -4 C -5 C -6 C -7 C -8 C --

All Channel Type Zoom

824 UKTV Gold 825 UKTV style

1 C --

2 C -3 C -4 C -5 C -6 C -7 C -8 C --

All Channel Type Zoom

Select Option

Delete Add to Favourite Lock Timer Viewing

Edit Channel Name Sort

▼

Select Option

Press the CH LIST button on the remote control to



bring up the channel lists.

English - 19

Setting Your Favourite Channels

You can set channels you watch frequently as Favourite.

1 Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

Channel

Mini Guide Default Guide : Mini Guide

Channel List

Channel Mode : Added Ch. Fine Turn Signal Information

2 Press the ◄ button to select Added Channels.

3 Press the ▲ or ▼ button to select All Channels, then

press the ENTER button.

Shows all currently available channels.

¯

4 Press the ▲ or ▼ button to select a channel as a favourite

channel.

Adding multiple channels to Favourite.

¯

Press the ▲ or ▼ button to select the desired channel in the channel list. Then press the yellow button. Repeat the above operation to select multiple channels. The  mark appears to the left of the

824 UKTV Gold

All Channels

825 UKTV style

1 C --

2 C -3 C -4 C -5 C -6 C -7 C -8 C --

All Channel Type Zoom

Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort

Select Option

selected channels.

5 Press the TOOLS button.

6 Press the ▲ or ▼ button to select Add to Favourite, then press the ENTER button.

The “♥” symbol will be displayed and the channel will be set as a favourite.

▼

7 To cancel your favourite channel selection, press the TOOLS button when a favourite channel is

selected. Press the ▲ or ▼ button to select Delete from Favourite, then press the ENTER button. The channel is deleted from Favourites and the “♥” mark disappears. Press the EXIT button to exit.

You can also Add or Delete a channel from Favourite in the Added Channels menu in the same

¯

manner. All favourite channels will be shown on Favourite menu.

¯

Press the CH LIST button on the remote control to bring



up the channel lists.

English - 20

Reserving a Program (Time Viewing)

If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another

Channel

channel. To reserve a program, set the current time first. See pages

36. Reserved chanels can only be set if they are in the Channel List (See page 18).

1 Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

2 Press the ▲ or ▼ button to select a channel, then press

Added Channels

the TOOLS button.

3 Press the ▲ or ▼ button to select Timer Viewing, then

press the ENTER button. The Reserve a Program (Timer Viewing) screen appears.

4 Press the ▲/▼/◄/► buttons to reserve a program and

then press the ENTER button. Reserving a program has been completed. Press the EXIT button to exit.

You can also reserve a program in the All Channels or

Favourites menus using the same procedures.

For information on how to confirm a viewing

reservation, refer to page 22. Only memorized channels can be reserved.

You can set the channel, month, day, year, hour and

minute directly by pressing the number buttons on the remote control.

Mini Guide Default Guide :Mini Guide

Channel List

Channel Mode : Added Ch.

Fine Tune

Signal Information

824 UKTV Gold 825 UKTV style

1 C --

2 C -3 C -4 C -5 C -6 C -7 C -8 C --

Channel Type Zoom

Antenna Channel Repeat

ATV

Date

01-01-2008

Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort

Select Option

Timer Viewing

1 Once

▼

Start Time

10:09

Enter ReturnMove Adjust

Press the CH LIST button on the remote control to bring up the channel lists.

Digital Program Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button,

Added Channels

the Program Guide for the channel appears. You can reserve a program according to the procedures described above.

: A program currently being broadcast. : A reserved program.

Air Zoom

English - 21

824 UKTV Gold 825 UKTV style

1 C --

2 C -3 C -4 C -5 C -6 C -7 C -8 C --

Option

1/22/2008

12:47 2.0

3:54 HD 1 99 6:44 HD 1 100 7:49 HD 8:59 + 10:08 10:37

Watch

Continued...

Confirming a Viewing Reservation

You can view, modify or delete a reservation. 1 Press the MENU button.

Channel

Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

2 Press the ◄ button to select Added Channels. 3 Press the ▲ or ▼ button to select Programmed, then

press the ENTER button. You can view the program reservations.

Modifying a viewing reservation

Added Channels

4 To select a reservation item to be modiﬁ ed, press the ▲ or

▼ button and then press the TOOLS button.

5 Press the ENTER button to select Change Info. 6 Press the ▲/▼/◄/► buttons to change a reservation

setting and then press the ENTER button. The reservation modiﬁ cation is applied.

Canceling a reservation

Programmed

4 To select a reservation item to be canceled, press the ▲ or

▼ button, and then press the TOOLS button.

5 Press the ▲ or ▼ button to select Cancel Schedules,

then press the ENTER button.

6 Press the ◄ or ► button to select OK, then press the

ENTER button.

The viewing reservation has been canceled.

Programmed

Press the EXIT button to exit.

Mini Guide Default Guide :Mini Guide

Channel List

Channel Mode : Added Ch.

Fine Tune

Signal Information

824 UKTV Gold 825 UKTV style

1 C --

2 C -3 C -4 C -5 C -6 C -7 C -8 C --

Channel Type

Air

2008/2/3

3:15 1 Air

4:15 2 Air No Program Name 2008/2/4 2:14 3 Air No Program Name 2008/2/5 2:15 4 Air No Program Name

Channel Type

Air

2008/2/3

3:15 1 Air No Program Name

4:15 2 Air No Program Name 2008/2/4 2:14 3 Air No Program Name 2008/2/5 2:15 4 Air No Program Name

Zoom Select Option

Zoom

Select Option Information

No Program Name

Change Info Cancel Schedules Information Select All

Programmed Menu

• Change Info: Select to change a viewing reservation.

• Cancel Schedules: Select to cancel a viewing reservation.

• Information: Select to view a viewing reservation.

• Select All / Deselect All:

You can select(or Deselect) all channel in the channel list.

Press the CH LIST button on the remote control to bring up the channel lists.

English - 22

Channel Type

Air

Zoom

Select Option Information

Continued...

Assigning Names to Channels

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.

Editing the Channel Name-Analogue 1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Channel List, then

press the ENTER button.

4 Press the ▲ or ▼ button to select the channel to be

assigned to a new name, then press the TOOLS button.

5 Press the ▲ or ▼ button to select Edit Channel Name,

then press the ENTER button.

6 Press the ▲/▼/◄/► button to select a letter, a number, or

a symbol, then press the ENTER button.

• Number buttons: You can enter numbers.

• Red button: You can switch between English and Characters.

• Green button: You can delete an already entered character.

• Yellow button: You can enter a blank space.

• Blue button: Press this button to finish renaming a channel.

7 Repeat steps 5 to 6 for each channel to be assigned to a

new name.

8 Press the EXIT button to exit.

Channel

Mini Guide Default Guide : Mini Guide

Channel List

Channel Mode : Added Ch. Fine Tune

Signal Information

824 Television

Added Channels

825 UKTV style

1 C --

2 C -3 C -4 C -5 C -6 C -7 C -8 C --

All Channel Type Zoom

Edit Channel Name

Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort

▼

Select Option

Number Character Delete Blank Done

Enter ReturnMove

Editing the Channel Number-Digital

Added Channels

1 Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

2 Select the channel number that you wish to edit by

pressing the ▲ or ▼ button repeatedly, then press the

TOOLS button.

3 Press the ▲ or ▼ button to select Edit Channel Number,

then press the ENTER button.

4 Then you can edit the Channel Number pressing the ▲ or

▼ button repeatedly. You can also edit the channel number by pressing the number buttons on the remote control.

English - 23

824 Television 825 UKTV style

826 UKTB style

2 C -3 C -4 C -5 C -6 C -7 C -8 C --

All Channel Type Zoom

Edit Channel Number

Channel

803

Delete Add to Favourite Lock Timer Viewing Edit Channel Number Auto Store

Select Option

Name

BBC Radio 1

ReturnEnterMove

Sorting the Stored Channels - Analogue

This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

Channel

ENTER button.

3 Press the ▲ or ▼ button to select Channel List, then

press the ENTER button.

4 Press the ▲ or ▼ button to select a channel, then press

the TOOLS button.

5 Press the ▲ or ▼ button to select Sort, then press the

ENTER button.

Added Channels

6 Select the channel that you wish to move by pressing the

▲ or ▼ button, then press the ENTER button.

7 Select the number of the programme to which the channel

is to be moved by pressing the ▲ or ▼ button. Press the ENTER button. The channel is moved to its new position and all other channels are shifted accordingly.

8 Repeat steps 4 to 7 until you have moved all the channels

to the required programme numbers.

9 Press the EXIT button to exit.

0 C-1 C04 2 C05 3 C06 4 C08 5 C09

Mini Guide Default Guide : Mini Guide

Channel List

Channel Mode : Added Ch. Fine Tune

Signal Information

824 UKTV Gold 825 UKTV style

1 C --

2 C -3 C -4 C -5 C -6 C -7 C -8 C --

All Channel Type Zoom

Sort

Move

Add to Favourite Lock Timer Viewing Edit Channel Name Sort Select All

▼

Select Option ► Next Program

▼

ReturnEnter

Selecting and Deselecting All Channels

1 Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

2 Press the ▲ or ▼ button to select a channel, then press

the TOOLS button.

3 Press the ▲ or ▼ button to select Select All or Deselect

All, then press the ENTER button.

 You can select(or Deselect) all channel in the channel list.

 The mark appears to the left of the selected channels.

English - 24

Added Channels

824 Television 825 UKTV style

1 C --

2 C - 3 C --

4 C --

 

5 C - 6 C - 7 C - 8 C --

All Channel Type Zoom

Delete Add to Favourite Lock Deselect All Select All Auto Store

Select Option

Storing Channels in Memory (Auto Store)

1 Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

2 Press the ▲ or ▼ button to select the channel to be

assigned a new name, then press the TOOLS button.

3 Press the ▲ or ▼ button to select Auto Store, then press

the ENTER button.

For further details on setting up options, refer to page 14.

¯

When there is a locked channel by Child Lock setting, PIN input screen appears.

¯

(refer to page 26)

824 Television

Added Channels

825 UKTV style

1 C --

2 C -3 C -4 C -5 C -6 C -7 C -8 C --

All Channel Type Zoom

▲

Lock Timer Viewing Edit Channel Name Sort Select All Auto Store

Select Option

Setting the Channel Mode

You can display either the added channels list or the favourite channels list when the CH LIST button on the remote control is pressed.

1 Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel Mode, then press the ENTER button.

2 Press the ▲ or ▼ button to select Added Ch. or Favourite

Ch., then press the ENTER button.

3 Press the EXIT button to exit.

Channel

Default Guide : Mini Guide Channel List

Channel Mode : Added Ch.

Fine Tune

Signal Information

Default Guide : Mini Guide Channel List

Channel Mode : Added Channels

Fine Tune Signal Information

Added Ch. Favourite Ch.

English - 25

Locking Channels

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using the buttons on the side. Only the remote control can release the Child Lock setting, so keep the remote control away from children.

 Locking channels 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Setup, then press the

Setup

ENTER button.

3 Press the ▲ or ▼ button to select Child Lock, then press

the ENTER button. Enter your 4 digit PIN number.

The default PIN number of a new TV set is “0-0-0-0”.

If you want to change PIN number, refer to page 37.

4 Press the ▲ or ▼ button to select On, then press the

ENTER button.

5 Press the ◄ button to select Channel, then press the

ENTER button.

6 Press the ▲ or ▼ button to select Channel List, then

Enter PIN

press the ENTER button.

7 Press the ▲ or ▼ button to select a channel to be locked,

then press the TOOLS button.

The symbol will be displayed and the channel will be

locked.

All Channels

 Unlocking channels 8 Press the ▲ or ▼ button to select Unlock, then press the

ENTER button.

Enter your 4 digit PIN number.

The channel is unlocked and the mark also

disappears.

The default PIN number of a new TV set is “0-0-0-0”.

If there is a locked channel by "Channel Lock" setting, PIN input screen appears when you start

"Auto Store" or "Plug&Play".(refer to pages 10~11)

Language : English Time

Child Lock : On ►

Change PIN Parental Lock Subtitle

Teletext Language : ----

Preference

Wall-Mount Adjustment

Melody : Off

Child Lock

* ***

Enter PIN

0~9

824 UKTV Gold 825 UKTV style

1 C --

2 C -3 C -4 C -5 C -6 C -7 C -8 C --

All Channel Type Zoom

Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort

Select Option

Return

▼

Fine Tuning Analogue Channels

Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

2 Press the ▲ or ▼ button to select Fine Tune, then press

the ENTER button.

3 Press the ◄ or ► button to adjust the fine tuning.

To store the fine tuning setting in the TV’s memory, press the ENTER button.

If you do not store the fine-tuned channel in memory,

adjustments are not saved.

4 To reset the fine tuning setting, press the ▼ button to

select Reset, then press the ENTER button. Press the EXIT button to exit.

Only Analogue TV channels can be fine tuned.

“ * ” will appear next to the number of fine-tuned

channels.

English - 26

Channel

ATV 2 * Fine Tuned

Channel List Channel Mode : Added Ch.

Fine Tune ►

Signal Information

Fine Tune

Reset

Move

Enter

Return

Viewing Signal Information

You can get information about the signal status.

Press the MENU button to display the menu.

Channel

Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

2 Press the ▲ or ▼ button to select Signal Information ,

then press the ENTER button.

3 Press the EXIT button to exit.

If the signal status is poor, the Weak or No Signal

message is displayed.

While viewing a Digital channel, this function can be

selected.

Service ID : 0403 Multiplex : (TSID 0004,ONID 20fa) Network : (ID 20fa) Bit error level 0 Signal Strength 82

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.

1 Press the MENU button to display the menu. 2 Press the ENTER button to select Picture. 3 Press the ENTER button again to select Mode. 4 Select the required mode by pressing the ▲ or ▼ button,

then press the ENTER button.

Available modes:

The settings values may vary depending on the input

¯

source.

Dynamic, Standard, Movie

5 Press the EXIT button to exit.

Picture

Channel Mode : Added Ch.

Fine Tune

Signal Information ►

Signal Information

ReturnEnter

Mode

Cell Light :7 Contrast : 95 Brightness : 45 Sharpness : 50 Colour : 50

Tint (G/R) : G50/R50

Detailed Settings

Standard ►

¯

 

Choose Dynamic for viewing the TV during the day or when there is bright light in the room.

Choose Standard for general TV watching mode.



Choose Movie when viewing the movie.



Easy Setting 1 Press the TOOLS button on the remote control. 2 Press the ▲ or ▼ button to select Picture Mode. 3 Press the ◄ or ► button to select the required option. 4 Press the EXIT or TOOLS button to exit.

English - 27

Picture

Mode

Cell Light :7 Contrast : 80 Brightness : 45 Sharpness : 50 Colour : 50 Tint (G/R) : G50/R50 Detailed Settings

Tools

Anynet+ (HDMI-CEC) Picture Size : Auto Wide Picture Mode ◄ Standard ► Sound Mode : Standard Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual I II : Mono

Move Adjust Exit

Dynamic

Standard

Movie

Customizing the Picture Settings

Your television has several setting options that allow you to control the picture quality.

1 Press the MENU button to display the menu.

Mode

2 Press the ENTER button to select Picture.

Picture

3 Press the ENTER button again to select Mode. 4 Select the required mode by pressing the ▲ or ▼ button,

then press the ENTER button.

Available modes:

Dynamic, Standard, Movie

5 Select the required option by pressing the ▲ or ▼ button,

then press the ENTER button.

6 When you are satisfied with your setting, press the ENTER

button.

7 Press the EXIT button to exit.

Cell Light :7 ►

Contrast : 95 Brightness : 45 Sharpness : 50 Colour : 50

Tint (G/R) : G50/R50

Detailed Settings Picture Options

 Cell Light – Contrast – Brightness – Sharpness – Colour – Tint(G/R)

In TV, Ext., AV, S-Video modes of the PAL system, you cannot use the Tint Function.

®

In PC mode, you can only make changes to Cell Light, Contrast, and Brightness.

®

Press the ◄ or ► button until you reach the optimal setting.

Configuring Detailed Settings on the Picture

Standard

You can set detailed picture settings.

1 Press the MENU button to display the menu. 2 Press the ENTER button to select Picture.

Picture

3 Press the ▲ or ▼ button to select Detailed Settings, then

press the ENTER button.

4 Select the required option by pressing the ▲ or ▼ button,

then press the ENTER button.

Available options:

Black Adjust, Dynamic Contrast, Gamma, Colour Space, White Balance, Flesh Tone, Edge Enhancement, xvYCC

5 When you are satisfied with your setting, press the ENTER

button.

6 Press the EXIT button to exit.

Detailed Settings is available in Standard or Movie mode.

¯

In PC mode, you can only make changes to Dynamic

¯

Contrast, Gamma and White Balance from among the Detailed Settings items.

 Black Adjust: Off/Low/Medium/High

You can directly select the black level on the screen to adjust the screen depth.

 Dynamic Contrast: Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

Colour : 50

Tint (G/R) : G50/R50

Detailed Settings ►

Picture Options Picture Reset

Detailed Settings

Black Adjust : Off Dynamic Contrast : Low Gamma : 0 Colour Space : Native White Balance Flesh Tone : 0 Edge Enhancement : On

Move

►

ReturnEnter

 Gamma: -3 ~ +3

You can adjust the middle brightness of pictures. Press the ◄ or ► button until you reach the optimal setting.

English - 28

Continued...

 Colour Space : Auto/Native/Custom

Colour space is a colour matrix composed of red, green and blue colours. Select your favourite colour space to experience the most natural colour.

− Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on program

sources.

− Native:

− Custom: Customizing the Colour Space

Colour: Red/Green/Blue/Yellow/Cyan/Magenta

Adjusts the Colour range to suit your preference. Colour is available when Colour Space is set to Custom. Press the ▲ or ▼ button to select Red, Green, Blue, Yellow, Cyan or Magenta. Press the ENTER button.

− Red

− Reset

 White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset

You can adjust the colour temperature for more natural picture colours. R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the adjusted screen. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. Press the ◄ or ► button until you reach the optimal setting. Reset: The previously adjusted white balance will be reset to the factory defaults.

 Flesh Tone:-15~+15

You can emphasize the pink tone in the picture. Press the ◄ or ► button until you reach the optimal setting.

 Edge Enhancement: Off/On

You can emphasize object boundaries.

Native Colour Space offers deep and rich colour tone.

Adjusts the colour range to suit your preference. (see “Customizing the Colour Space”)

/Green/Blue: In Colour, you can adjust the RGB values for the selected colour.

Press the ▲ or ▼ button to select Red, Green or Blue to change it. Press the ENTER button. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button.

: Resets the colour space to the default values.

Changing the adjustment value will refresh the adjusted screen.

 xvYCC: Off/On

Setting the xvYCC mode to On increases detail and colour space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the Picture Mode to Movie to enjoy this feature.

The xvYCC function works only in Component or HDMI mode

If xvYCC function is active, PIP cannot be selected.

English - 29

Picture Options

You can set detailed picture settings. 1 Press the MENU button to display the menu.

2 Press the ENTER button to select Picture. 3 Press the ▲ or ▼ button to select Picture Options, then

press the ENTER button.

4 Select the required option by pressing the ▲ or ▼ button,

then press the ENTER button. When you are satisfied with your setting, press the ENTER button.

5 6 Press the EXIT button to exit.

In PC mode, you can only make changes to the Colour

®

Tone, Size and Screen Burn Protection from among the items in Picture Options.

 Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2

When the picture mode is set to Dynamic or

®

Standard, Warm1 and Warm2 cannot be selected.

 Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan

You can select the picture size which best corresponds to your viewing requirements.

−

Auto Wide: Expanding and pulling up the picture from 4:3 to 16:9 ratio.

Auto Wide function is available only in TV, Ext.1,

®

Ext.2, AV and S-Video mode.

− 16:9

: Sets the picture to 16:9 wide mode.

−

Wide Zoom: Magnify the size of the picture more than 4:3. Move the screen up/down using the ▲ or ▼ button after selecting the Position by pressing the ► or ENTER button.

−

Zoom: Magnify the size of the picture vertically on screen.

− 4:3

: Sets the picture to 4:3 normal mode.

Just Scan: Use this function to see the full image without any cutoff when HDMI(720p/1080i/

−

1080p), Component(1080i/1080p) signals are input.

After selecting Just Scan in HDMI (1080i/1080p) or Component (1080i/1080p) mode

the ◄ or ► button to select Position, then press the ENTER button. Press the ▲, ▼, ◄ or ► button to move the picture. Reset: Press the ◄ or ► button to select Reset, then press the ENTER button. You can initialize the setting.

With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off

®

or a specific colour appears on the screen. For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p)

®

connection of 50 and 60Hz, only the input source is supported.

Picture

Colour Tone :

Size Screen Mode : Digital NR : DNle HDMI Black Level Movie Plus :Low

Tint (G/R) : G50/R50

Detailed Settings

Picture Options ►

Picture Reset

Picture Options

Cool2

Cool1

Normal

Warm1

: 2min

Warm2

: 2min

Move

ReturnEnter

: Press

You can change the picture size simply by pressing the P.SIZE button on the remote control.

¯

Depending on the input source, the picture size options may vary.

®

The items available may differ depending on the selected mode.

®

When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.

®

In PC Mode, only 16:9 and 4:3 mode can be adjusted.

®

If you use the Just Scan function with HDMI 720p input, 1 line will be cut at the top, bottom, left

®

and right as in the overscan function.

Positioning and Sizing the screen using Zoom

− Resizing the screen using the

direction using the ▲ or ▼ button as well as the screen size.

− Move the screen up/down using the ▲ or ▼ button after selecting the

or ► button.

− Resize the screen vertically using the ▲ or ▼ button after selecting the Size by pressing the ◄ or

► button.

Zoom enables the positioning and sizing of the screen to up/down

Position by pressing the ◄

Continued...

English - 30

+ 359 hidden pages