Samsung HM1500, BHM1500 User Manual
www.samsung.com
Printed in Korea
GH68-27479A Rev.1.1
EU A. 10/2013
English ...................................................................................1
Français ...............................................................................27
Italiano .................................................................................53
Ελληνικά ..............................................................................79
Nederlands ..................................................................................105
Contents
Getting started
Your headset overview ....................................................4
Button functions .............................................................5
Charging the headset ......................................................6
Wearing the headset ....................................................... 8
Using your headset
Turning the headset on or off .........................................10
Activate Vibration mode ................................................10
Pairing and connecting the headset ................................. 11
Pairing via the Active pairing feature ............................... 14
Using call functions ....................................................... 16
English
1
Appendix
Frequently asked questions ............................................ 20
Warranty and parts replacement .....................................22
Correct disposal of this product ......................................23
Correct disposal of batteries in this product ...................... 24
Specications ............................................................... 25
2
Safety information
To prevent injury to yourself and others or damage to your device, read
the safety information about your device before using the device.
Comply with all safety warnings and regulations regarding mobile device •
usage while operating a vehicle.
Do not disassemble, modify, or repair your device. Any changes or •
modications to your device can void your manufacturer’s warranty. If your
device needs servicing, take your device to a Samsung Service Centre.
Do not bite or suck the device. Children or animals can choke on small •
parts.
Do not store your device in very hot or very cold areas. It is recommended •
to use your device at temperatures from 5 °C to 35 °C. Extreme
temperatures can damage the device and reduce the charging capacity and
life of your device and battery.
Do not use your device while it is charging or touch your device with wet •
hands.
Keep your device dry. Humidity and liquids may damage the parts or •
electronic circuits in your device. Water damage to your device can void
your manufacturer’s warranty.
Do not use your device outdoor during a thunderstorm. Doing so may result •
in electric shock or device malfunction.
Excessive exposure to loud sounds can cause hearing damage. Exposure
to loud sounds while walking may distract your attention and cause an
accident.
English
3
Getting started
This section explains what to remember for the proper use of your
Bluetooth headset.
Your headset overview
Charger
jack
Volume up button
Earpiece
Make sure you have the following items with your headset: •
Travel adapter, Ear rubbers, User manual
The items supplied with your headset may vary depending on your •
region.
4
Power switch
Talk button
Indicator light
Volume down
button
Microphone
Button functions
Power switch
Slide up or down to turn the headset on or off.
Talk button
Press and hold to enter Pairing mode.•
Press to make or answer a call.•
Press to end a call.•
Volume up or down button
Press to adjust the volume.•
Press and hold at the same time to check the battery life time.•
Press and hold to turn the microphone on or off.•
You can hear a beep when the volume level of the headset reaches to the
lowest or highest level.
English
5
Charging the headset
This headset has a rechargeable internal battery which is nonremovable. Ensure that you fully charge the battery before using the
headset for the rst time.
1 Plug the small end of the travel adapter into the charger jack.
2 Plug the large end of the travel adapter into a power outlet.
During charging, the indicator light will turn red. If charging does not
begin, unplug the travel adapter and plug it in again.
6
3 When the headset is fully charged, the indicator light changes to
blue. Unplug the travel adapter from the power outlet and the
headset.
Use only a Samsung-approved travel adapter. Unauthorised travel •
adapters may cause an explosion or damage to the headset.
The battery will gradually wear out while charging or discharging •
because it is a consumable part.
When a call comes in while charging, disconnect your headset from the •
travel adapter and answer the call.
To save energy, unplug the charger when not in use. The charger does •
not have a power switch, so you must unplug the charger from the
electric socket when not in use to avoid wasting power. The charger
should remain close to the electric socket and easily accessible while
charging.
The socket-outlet shall be installed near the equipment and shall be •
easily accessible.
When the battery charge gets low
The headset beeps and the indicator light ashes red. Recharge
the battery. If the headset powers off during a call, the call will be
automatically transferred to the phone.
English
7
Checking the battery level
At the same time, press and hold the Volume up and down buttons.
Depending on the battery level, the indicator light ashes 5 times in one
of the following colours:
Battery level Indicator light colour
Above 80% Blue
80 ~20% Violet
Below 20% Red
Wearing the headset
Insert the earpiece in your ear and clip the headset
to your clothes.
8
When you are not using the headset, you can clip
the earpiece to your clothes.
Using your headset
This section explains how to turn the headset on, pair and connect to
the phone, and use various functions
Activated functions and features may differ depending on the phone •
type.
Some devices, especially those that are not tested or approved by •
Bluetooth SIG, may be incompatible with your headset.
English
9
Turning the headset on or off
To turn the headset on, slide up the power switch. The blue indicator •
light ashes 4 times.
To turn the headset off, slide down the power switch. The indicator •
light turns off after the blue indicator light changes to red.
Activate Vibration mode
You can activate Vibration mode to receive a vibration alert when a call
comes in.
Press and hold the Talk button and the Volume up button at the same
time.
To deactivate Vibration mode, press and hold the Talk button and the
Volume down button at the same time.
10
Pairing and connecting the headset
Pairing will create a unique and encrypted wireless link between two
Bluetooth enabled devices, such as a Bluetooth phone and a Bluetooth
headset.
To use the headset with other Bluetooth devices, the devices must be
paired. When trying to pair the two devices, keep the headset and the
phone reasonably close together. After pairing, you can connect the two
devices.
Pairing and connecting the headset with a phone
1 Enter pairing mode.
Turn on your headset and press and hold the Talk button until the •
blue indicator light stays lit.
If you turn the headset on for the rst time, it proceeds into •
Pairing mode immediately.
2 Activate the Bluetooth feature on your phone and search for the
headset (see your phone’s user manual).
3 Select the headset (HM1500) from the list of devices found by your
phone.
English
11
4 Enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the
headset to your phone.
Your headset supports the Simple Pairing feature which allows the
headset to be paired with a phone without requesting a PIN. This feature
is available for phones that are compliant with Bluetooth version 2.1 or
higher.
The headset also can be paired via the Active pairing feature,
see page 14.
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected
with two Bluetooth phones at the same time.
1 After connecting with the rst Bluetooth phone, press and hold the
Talk button until the blue indicator light stays lit.
2 Press and hold the Volume up button to activate the Multi-point
feature.
3 Activate the Bluetooth feature on the second Bluetooth phone and
search for the headset (see your phone’s user manual).
12
4 Select the headset (HM1500) from the list of devices found by the
second Bluetooth phone.
5 Enter the Bluetooth PIN (0000, 4 zeros) to connect the headset to
the phone.
6 Reconnect to the headset from the rst Bluetooth phone.
You can set the headset automatically to reconnect to the recently •
connected phones each time you turn it on.
To reconnect to the two most recently connected phones, activate the Multi-point feature. Press and hold the Volume up button in Pairing
mode until the blue indicator light ashes twice.
To reconnect to only the most recently connected phone, deactivate the Multi-point feature. Press and hold the Volume down button in
Pairing mode until the red indicator light ashes twice.
When the headset connects to two Bluetooth phones, some phones •
may not connect to the headset as the second Bluetooth phone.
Disconnecting the headset
To disconnect the headset from your phone,
Turn off the headset.•
Use the Bluetooth menu on your phone.•
English
13
Reconnecting the headset
When the headset is paired with a phone, it will attempt to automatically
reconnect each time you turn it on.
If the headset does not automatically attempt to reconnect,
Press the Talk button.•
Use the Bluetooth menu on your phone.•
Pairing via the Active pairing feature
With the Active pairing feature, your headset can automatically search
for a Bluetooth phone and try to make a connection with it.
1 Turn on the headset.
2 Press and hold the Talk button to enter Pairing mode.
14
3 Press and hold the Talk button until the violet indicator light turns on.
The headset will switch to Active Pairing mode, search a Bluetooth
phone within range, and attempt to pair with it.
Ensure the phone you wish to connect to is within range of the headset. •
Place the headset and phone close to each other to avoid pairing with
other devices.
The headset will attempt Active pairing for up to 20 seconds.•
The Bluetooth phone you want to connect with must not be paired with •
other devices. If the phone is already connected to another device, end
the connection and restart Active pairing feature.
This feature is available for mobile phones, but the phone’s Bluetooth •
visibility option must be set to on.
This feature may be unavailable depending on the some PDAs.•
English
15
Using call functions
Making a call
Redialling the last number
Press the Talk button to redial the last number of the most recently
connected phone.
Press the Talk button twice to redial the last number of the other phone.
Dialling a number by voice
Press and hold the Talk button to dial a number of the rst phone by
voice, and say a name.
Available call functions may vary by the phone.
16
Answering a call
Press the Talk button to answer a call when you hear incoming call
tones.
When two calls from the two connected phones come in, you can answer
the call of the rst phone.
Ending a call
Press the Talk button to end a call.
Rejecting a call
Press and hold the Talk button to reject a call when a call comes in.
When two calls from the two connected phones come in, you can reject
the call of the rst phone.
Using options during a call
You can use the following functions to control your call during a call.
Adjusting the volume
Press the Volume up or down button to adjust the volume.
17
English
Muting the microphone
Press and hold the Volume up or down button to turn the microphone
off so that the person with whom you are speaking cannot hear you.
When the microphone is turned off, the headset beeps at regular
intervals. Press and hold the Volume up or down button again to turn
the microphone back on.
Transferring a call from the phone to the headset
Press the Talk button to transfer a call from the phone to the headset.
Placing a call on hold
Press and hold the Talk button to place the current call on hold.
When the headset is connected with two phones, this function is not
available.
18
Answering a second call
Press the Talk button to end the rst call and answer a second call of •
the same phone when you hear call waiting tones.
Press and hold the Talk button to place the rst call on hold and •
answer a second call of the same phone when you hear call waiting
tones.
To switch between the current call and the held call, press and hold •
the Talk button.
When the headset is connected with two Bluetooth phones, you cannot
answer a second call of the same phone.
Answering a new call of the second phone
Press the Talk button to end the rst call and answer a second call of •
the other phone when you hear call waiting tones.
Press and hold the Talk button to place the rst call on hold and •
answer a second call of the other phone when you hear call waiting
tones.
To switch between the current call and the held call, press and hold •
the Talk button.
English
19
Appendix
Frequently asked questions
Will my headset
work with laptops,
PCs, and PDAs?
Why do I
hear static or
interference while
on a call?
Will my headset
interfere with my
car's electronics,
radio, or
computer?
20
Your headset will work with devices that
support your headset's Bluetooth version and
proles. For specications, see page 25.
Appliances such as cordless phones and
wireless networking equipment may cause
interference, which usually sounds like static.
To reduce any interference, keep the headset
away from other devices that use or produce
radio waves.
Your headset produces signicantly less power
than a typical mobile phone. It also only
emits signals that are in compliance with the
international Bluetooth standard. Therefore,
you should not expect any interference
with standard consumer-grade electronics
equipment.
Can other
Bluetooth phone
users hear my
conversation?
Why do I hear an
echo while on a
call?
How do I clean my
headset?
The headset does
not fully charge.
When you pair your headset to your Bluetooth
phone, you are creating a private link between
only these two Bluetooth devices. The wireless
Bluetooth technology used in your headset is
not easily monitored by third parties because
Bluetooth wireless signals are signicantly
lower in radio frequency power than those
produced by a typical mobile phone.
Adjust the headset volume, or move to another
area and try again.
Wipe it with a soft dry cloth.
The headset and the travel adapter may not
have been connected properly.
Separate the headset from the travel adapter,
reconnect, and charge the headset.
21
English
Warranty and parts replacement
Samsung warrants this product as free of defects in material, design and
workmanship for the period of one year from the original date of purchase.
If during the period of warranty this product proves defective under normal
use and service you should return the product to the retailer from whom
it was originally purchased or qualied service centre. The liability of
Samsung and its appointed maintenance company is limited to the cost of
repair and/or replacement of the unit under warranty.
The warranty is limited to the original purchaser•
A copy of your receipt or other proof of purchase is required for a proper •
warranty service
The warranty is void if the serial number, date code label or product label •
is removed, or if the product has been subject to physical abuse, improper
installation, modication, or repair by unauthorised third parties
Specically exempt from any warranty are limited-life consumable •
components such as batteries and other accessories
Samsung will not assume any responsibility for any loss or damage incurred •
in shipping. All repair work on Samsung products by unauthorised third
parties voids any warranty
* Depending on your region, the length of warranty may vary.
22
*
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates
that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other
household waste.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types
of waste and recycle them responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased
this product, or their local government ofce, for details of where and how
they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
This EEE is compliant with RoHS.
23
English
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
The marking on the battery, manual or packaging indicates that
the battery in this product should not be disposed of with other
household waste. Where mark ed, the chemical symbols Hg, Cd
or Pb indicate that the battery contains mercury, cadmium or lead above
the reference levels in EC Directive 2006/66.
The battery incorporated in this product is not user replaceable. For
information on its replacement, please contact your service provider.
Do not attempt to remove the battery or dispose it in a re. Do not
disassemble, crush, or puncture the battery. If you intend to discard the
product, the waste collection site will take the appropriate measures for
the recycling and treatment of the product, including the battery.
24
Specications
Item Specications and description
Bluetooth version 2.1+EDR
Support prole Headset Prole, Hands-Free Prole
Operating range Up to 33 feet (10 metres)
Standby time Up to 250 hours*
Talk time Up to 6 hours*
Charging time Approximately 2 hours*
* Depending on the phone type and usage, the actual time may vary.
English
25
Product details
Declaration of Conformity
For the following
Product : Bluetooth Headset
Model(s) : HM1500
Declaration & Applicable standards
We hereby declare, that the product above is in compliance with the essential requirements of the R&TTE Directive (1999/5/EC)
by application of:
SAFETY EN 60950-1 : 2006 + A12 : 2011
EMC EN 301 489-01 V1.9.2 (09-2011)
EN 301 489-17 V2.2.1 (09-2012)
RADIO EN 300 328 V1.7.1 (10-2006)
and the Dire ctive (20 11/65/EU) on the restriction of t he use of cer tain haz ardous s ubstances in elec trical an d electr onic
equipment.
Representative in the EU
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK
2013.09.25 Joong-Hoon Choi / Lab. Manager
(Place and date of issue) (Name and signature of authorised person)
* This is not the address of Samsung Service Centre. For the address or the phone number of Samsung Service Centre, see the
warranty card or contact the retailer where you purchased your product.
Table des matières
Préparation
Présentation de votre oreillette ....................................... 30
Fonctions des touches ................................................... 31
Chargement de l’oreillette .............................................. 32
Positionnement de l’oreillette .........................................34
Utilisation de l’oreillette
Mise en marche/arrêt de l’oreillette ................................. 36
Activation du mode Vibreur ............................................ 36
Appairage et connexion de l’oreillette .............................. 37
Appairage via la fonction d’appairage actif .......................40
Utilisation des fonctions d’appel ...................................... 42
Français
27
Loading...