Samsung BD-UP5000 Schematic
Duo HD Disc Player
Chassis : Blu-Ray
BASIC : BD-UP5000
Application Model
: BD-UP5000
Application Areas
: XAA, XAC, AFS
SERVICE MANUAL BD-UP5 000
If you want to know additional information which is not includ-
ed on this Service Manual, Please refer to the SKP(Samsung
Knowledge Portal) web site.
Area Web Site
North America URL ; http://service.samsungportal.com
Latin America URL ; http://latin.samsungportal.com
CIS URL ; http://cis.samsungportal.com
Europe URL ; http://europe.samsungportal.com
China URL ; http://china.samsungportal.com
Asia URL ; http://asia.samsungportal.com
Mideast & Africa URL ; http://mea.samsungportal.com
Manual
SERVICE
Duo HD Disc Player Contents
1. Precautions
2. Product Specification
3. Disassembly and Reassembly
4. Trouble Shooting
5. Exploded View and Parts List
6. PCB Diagrams
7. Schematic Diagrams
This Service Manual is a property of Samsung Electronics Co .,Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law.
© Samsung Electronics Co., Ltd. SEP. 2007
Printed in Korea
AK82-01246A
CONTENTS CONTENTS
1. Precautions 1-1 ~ 1-6
1-1 Safety Precautions (1-1)
1-2 Servicing Precautions (1-3)
1-3 ESD Precautions (1-4)
1-4 Handling the optical pick-up (1-5)
~ 2-8
3. Disassembly and Reassembly 3-1 ~ 3-8
3-1 Cabinet and PCB (3-1)
3-2 PCB Location (3-7)
4. Trouble Shooting 4-1 ~ 4-28
4-1 Trouble Shooting (4-2)
4-2 Software Update (4-24)
4-3 Firmware Upgrade (4-26)4-3 Firmware Upgrade (4-26)
7-5 Video (Main PCB) (7-7)
7-6 BCM7440 STRAP BIT (Main PCB) (7-9)
7-7 BCM7440 FALSH (Main PCB) (7-10)
7-8 BCM7440 GPIO (Main PCB) (7-11)
7-9 ATAPI/LAN Interface (Main PCB) (7-12)
7-10 BCM7440 DDR2 I/F (Main PCB) (7-13)
7-11 BCM7440 HOST I/F (Main PCB) (7-14)
7-12 BCM7440 CLOCK (Main PCB) (7-15)
7-13 BCM7440 POWER (Main PCB) (7-16)
7-14 HDMI (Main PCB) (7-17)
7-15 CEC MICOM (Main PCB) (7-18)
7-16 POWER BLOCK (Main PCB) (7-19)
7-17 Reon (Main PCB) (7-20)
7-18 Reon DDR I/F (Main PCB) (7-21)
7-19 Reon DDR (Main PCB) (7-22)
7-20 Reon POWER BLOCK (Main PCB) (7-23)
7-21 Front (Front PCB) (7-24)
7-22 Power Key (Power Key PCB) (7-25)
5. Exploded View and Parts List 5-1 ~ 5-22
5-1 Cabinet Assembly (5-2)
5-2 Electrical Parts List (5-4)
6. PCB Diagrams 6-1 ~ 6-10
6-1 Wiring Diagram (6-2)
6-2 Main PCB (6-3)
6-3 S.M.P.S PCB (6-6)
6-4 Front PCB (6-8)
6-5 Power Key PCB (6-9)
7. Schematic Diagrams 7-1 ~ 7-22
7-1 All block Diagram (7-2)
7-2 Power (7-3)
7-3 S.M.P.S (S.M.P.S PCB) (7-5)
7-4 Audio (Main PCB) (7-6)
1. Precautions
1-1 Safety Precautions
1) Before returning an instrument to the customer,
always make a safety check of the entire instrument,
including, but not limited to, the following items:
(1) Be sure that no built-in protective devices are
defective or have been defeated during servicing.
(1)Protective shields are provided to protect both
the technician and the customer. Correctly replace
all missing protective shields, including any
removed for servicing convenience.
(2)When reinstalling the chassis and/or other
assembly in the cabinet, be sure to put back in place
all protective devices, including, but not limited to,
nonmetallic control knobs, insulating fish papers,
adjustment and compartment covers/shields, and
isolation resistor/capacitor networks. Do not operate
this instrument or permit it to be operated without
all protective devices correctly installed and
functioning.
(2) Be sure that there are no cabinet openings through
which adults or children might be able to insert
their fingers and contact a hazardous voltage. Such
openings include, but are not limited to, excessively
wide cabinet ventilation slots, and an improperly
fitted and/or incorrectly secured cabinet back
cover.
(3) Leakage Current Hot Check-With the instrument
completely reassembled, plug the AC line cord
directly into a 230V(220V ~ 240V) AC outlet. (Do
not use an isolation transformer during this test.)
Use a leakage current tester or a metering system
that complies with American National Standardsp
institute (ANSI) C101.1 Leakage Current for
Appliances and Underwriters Laboratories (UL)
1270 (40.7). With the instrument’s AC switch first in
the ON position and then in the OFF position,
measure from a known earth ground
(metal water pipe,
conduit, etc.) to all exposed metal parts of the
instrument (antennas, handle brackets, metal
cabinets,
screwheads, metallic overlays, control shafts,
etc.), especially any exposed metal parts that offer
an electrical return path to the chassis.
Any current measured must not exceed 0.5mA.
Reverse the instrument power cord plug in the outlet
and repeat the test. See Fig. 1-1.
Any measurements not within the limits specified
herein indicate a potential shock hazard that must
be eliminated before returning the instrument to
the customer.
Fig. 1-1 AC Leakage Test
(4) Insulation Resistance Test Cold Check-(1) Unplug
the power supply cord and connect a jumper wire
between the two prongs of the plug. (2) Turn on the
power switch of the instrument. (3) Measure the
resistance with an ohmmeter between the
jumpered AC plug and all exposed metallic cabinet
parts on the instrument, such as screwheads,
antenna, control shafts, handle brackets, etc. When
an exposed metallic part has a return path to the
chassis, the reading should be between 1 and 5.2
megohm. When there is no return path to the chassis,
the reading must be infinite. If the reading is
not within the limits specified, there is the possibility
of a shock hazard, and the instrument must be
repaired and rechecked before it is returned to the
customer. See Fig. 1-2.
Fig. 1-2 Insulation Resistance Test
Samsung electronics 1-1
Precautions
1-2 Samsung Electronics
2) Read and comply with all caution and safety related
notes on or inside the cabinet, or on the chassis.
3) Design Alteration Warning-Do not alter or add to
the mechanical or electrical design of this
instrument.
Design alterations and additions, including
butnotlimitedto,circuitmodicationsandthe
addition of items such as auxiliary audio output
connections, might alter the safety characteristics of
this instrument and create a hazard to the user. Any
design alterations or additions will make you, the
servicer, responsible for personal injury or property
damage resulting therefrom.
4) Observe original lead dress. Take extra care to
assure correct lead dress in the following areas:
(1) near sharp edges, (2) near thermally hot parts (be
sure that leads and components do not touch
thermally
hot parts), (3) the AC supply, (4) high voltage,
and (5) antenna wiring. Always inspect in all areas
for pinched, out-of-place, or frayed wiring, Do not
change spacing between a component and the
printed-circuit board. Check the AC power cord for
damage.
5) Components, parts, and/or wiring that appear to
have overheated or that are otherwise damaged
should be replaced with components, parts and/ or
wiringthatmeetoriginalspecications.
Additionally, determine the cause of overheating
and/or damage and, if necessary, take corrective
action to remove any potential safety hazard.
6) Product Safety Notice-Some electrical and mechanical
parts have special safety-related characteristics
which are often not evident from visual inspection,
nor can the protection they give necessarily be
obtained by replacing them with components rated
for higher voltage, wattage, etc. Parts that have
specialsafetycharacteristicsareidentiedby
shading,
an ( )or a ( )on schematics and parts lists. Use
of a substitute replacement that does not have the
same safety characteristics as the recommended
replacementpartmightcreateshock,reand/or
other hazards. Product safety is under review
continuously and new instructions are issued
whenever appropriate.
1-2 Servicing Precautions
Precautions
CAUTION : Before servicing units covered by this
service manual and its supplements, read and follow
the Safety Precautions section of this manual.
Note:Ifunforseencircumstancescreateconict
between the following servicing precautions and any
of the safety precautions, always follow the safety precautions.
Remember: Safety First.
1-2-1 General Servicing Precautions
(1) a. Always unplug the instrument’s AC powercord
from the AC power source before (1) re-moving
or reinstalling any component, circuit board,
module or any other instrument assembly, (2)
disconnecting any instrument electrical plug or
other electrical connection, (3) connecting a test
substitute in parallel with an electrolytic ca
pacitor in the instrument.
b. Do not defeat any plug/socket B+ voltage
interlocks with which instruments covered by
this service manual might be equipped.
c. Do not apply AC power to this instrument and
/or any of its electrical assemblies unless all
solid-state device heat sinks are correctly installed.
d. Always connect a test instrument’s ground lead
to the instrument chassis ground before connecting
the test instrument positive lead. Always
remove the test instrument ground lead last.
(4) An insulation tube or tape is sometimes used and
some components are raised above the printed
wiring board for safety. The internal wiring is
sometimes clamped to prevent contact with heating
components. Install such elements as they
were.
(5) After servicing, always check that the removed
screws, components, and wiring have been installed
correctly and that the portion around the
serviced part has not been damaged and so on.
Further, check the insulation between the blades of
the attachment plug and accessible conductive
parts.
1-2-2 Insulation Checking Procedure
Disconnect the attachment plug from the AC outlet
and turn the power ON. Connect the insulation resistance meter (500V) to the blades of the attachment
plug. The insulation resistance between each blade of
the attachment plug and accessible conductive
parts(see note) should be more than 1 Megohm.
Note : Accessible conductive parts include metal panels,
input terminals, earphone jacks, etc.
Note : Refer to the Safety Precautions section ground
lead last.
(2) The service precautions are indicated or printed on
the cabinet, chassis or components. When servicing,
follow the printed or indicated service precautions
and service materials.
(3)Thecomponentsusedintheunithaveaspecied
ameresistanceanddielectricstrength.
When replacing components, use components
whichhavethesameratings.Componentsidentied
by shading, by( ) or by ( ) in the circuit diagram
are important for safety or for the characteristics
of the unit. Always replace them with the exact
replacement components.
Samsung Electronics 1-3
Precautions
1-4 Samsung Electronics
1-3 ESD Precautions
Electrostatically Sensitive Devices (ESD)
Some semiconductor (solid state) devices can be damagedeasily by static electricity.
Such components commonly are called Electrostatically Sensitive Devices(ESD). Examples of typical ESD
devicesareintegratedcircuitsandsomeeld-effect
transistors and semiconductor chip components. The
following techniques should be used to help reduce
the incidence of component damage caused by static
electricity.
(1) Immediately before handling any semiconductor
component or semiconductor-equipped assembly,
drain off any electrostatic charge on your body by
touching a known earth ground. Alternatively,
obtain and wear a commercially available
discharging wrist strap device, which should be
removed for potential shock reasons prior to
applying power to the unit under test.
CAUTION : Be sure no power is applied to the chassis
or circuit, and observe all other safety precautions.
(8) Minimize bodily motions when handling
unpackaged replacement ESD devices.
(Otherwise harmless
motion such as the brushing together of your
clothes fabric or the lifting of your foot from a
carpetedoorcangeneratestaticelectricity
sufcienttodamageanESDdevice).
(2) After removing an electrical assembly equipped
with ESD devices, place the assembly on a
conductive surface such as aluminum foil, to
prevent electrostatic
charge buildup or exposure of the assembly.
(3) Use only a grounded-tip soldering iron to solder or
unsolder ESD devices.
(4) Use only an anti-static solder removal devices.
Somesolderremovaldevicesnotclassiedas
“anti-static”cangenerateelectricalchargessuf
cient to damage ESD devices.
(5) Do not use freon-propelled chemicals. These can
generateelectricalchargessufcienttodamage
ESD devices.
(6) Do not remove a replacement ESD device from its
protective package until immediately before your
are ready to install it.(Most replacement ESD
devices are packaged with leads electrically shorted
together by conductive foam, aluminum foil or
comparable conductive materials).
(7) Immediately before removing the protective
materials from the leads of a replacement ESD
device, touch the protective material to the
chassis or circuit assembly into which the device
will be installed.
1-4 Handling the optical pick-up
The laser diode in the optical pick up may suffer electrostatic breakdown because of potential static electricity from clothing and your body.
The following method is recommended.
(1) Place a conductive sheet on the work bench (The
black sheet used for wrapping repair parts.)
Precautions
(2) Place the set on the conductive sheet so that the
chassis is grounded to the sheet.
(3) Place your hands on the conductive sheet(This
gives them the same ground as the sheet.)
(4) Remove the optical pick up block
(5) Perform work on top of the conductive sheet. Be
careful not to let your clothes or any other static
sources to touch the unit.
u Be sure to put on a wrist strap grounded to the
sheet.
u Be sure to lay a conductive sheet made of copper
etc. Which is grounded to the table.
Fig.1-3
(6) Short the short terminal on the PCB, which is inside
the Pick-Up ASS’Y, before replacing the Pick Up. (The short terminal is shorted when the Pick Up Ass’y is being lifted or moved.)
(7) After replacing the Pick-up, open the short terminal
on the PCB.
Samsung Electronics 1-5
Precautions
M E M O
1-6 Samsung Electronics
2. Product Specication
2-1 Product Specication
Power requirements AC 120V ~ 60Hz
Power consumption 42W
General
Disc
Video
Output
Video/Audio HDMI
Audio
Output
Weight 9.3 Ibs
Dimensions 16.9 (W) x 12.8 (D) x 3.1 (H) inches
Operating Temperature Range +41°F to 95°F
Operating Humidity Range 10 % to 75 %
BD Reading Speed : 4.917m/sec
HD DVD Reading speed : 6.61m/sec
DVD
(Digital Versatile Disc)
Composite Video
Component Video
S-Video
2 Channel L(1/L), R(2/R)
7.1 Channel
Digital Audio Output
*Frequency Response
*S/N Ratio 110 dB
*Dynamic Range 100 dB
*Total Harmonic Distortion
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
1 channel : 1.0 Vp-p (75 Ω load)
Blu-ray Disc/HD DVD/DVD : 480i
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
HD DVD/Blu-ray Disc : 1080i, 720p, 480p, 480i DVD : 480p, 480i
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.3 Vp-p (75 Ω load)
Blu-ray Disc/HD DVD / DVD : 480i
480p, 720p, 1080i. 1080p
PCM multichannel audio, bitstream audio, PCM audio
F/L, F/R, R/L, R/R, C/T, S/W, SBR, SBL
Optical/Coaxial
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
0.003%
Samsung Electronics 2-1
Product Specication
2-2 Samsung Electronics
2-1-1 Player Features
qSupporting a Variety of Video Disc Types
SupportsBD,HDDVD,DVDVideo,DVD-RW,-R(Vmodeandnalizedonly).
qHDMI(HighDenitionMultimediaInterface)
HDMIreducespicturenoisebyallowingapuredigitalvideo/audiosignalpathfromtheplayertoyourTV.
qSimplayHD
SimplayHDguaranteesthatthisplayerhasbeentestedaccordingto
specicationsaimedatmaximizingthedeliveryofHDcontent.
2-1-2 Blu-ray Disc Features
Blu-rayDiscscanstore25GB(singlelayer)or50GB(duallayer)onasinglesideddisc-about5to10timesthe
capacityofaDVD.Blu-rayDiscsalsosupportthehighestqualityHDvideoavailableintheindustry(upto1920x
1080at40Mbit/sec)-Largecapacitymeansnocompromiseonvideoquality.Furthermore,aBlu-rayDischasthe
samefamiliarsizeandlookasDVD.
2-1-3 HD DVD Features
TheHDDVDvideodiscisahigh-density,mass-storagemedium.
TheHDDVDdiscstandardhasbeenapprovedbytheDVDforum.
TheHDDVD(dual-layer)canstoreupto30GBofdata,andthesinglelayerHDDVDcandosoupto15GB.
OnonesideofasinglelayerDVD,youcanstoreupto8hoursofhighresolutionvideosourcein1125scanning
lines,andupto48hoursofstandardresolutionsourcein525scanninglines.(Thegurescandiffer,depending
onthebitrateoftherecordedsource)
*ThefollowingBD/HDDVDDiscfeaturesarediscdependantandwillvary.
Appearanceandnavigationoffeatureswillalsovaryfromdisctodisc.
Notalldiscswillhavethefeaturesdescribedbelow.
qVideohighlights
TheBD-ROM/HDDVD-ROMformatformoviedistributionsupportsthreehighlyadvancedvideocodecs,
includingAVC,VC-1,andMPEG-2.
HDvideoresolutionsarealsoavailable:
-1920x1080HD
-1280x720HD
qForHigh-DenitionPlayback
Toviewhigh-denitioncontentsinBD/HDDVDDisc,anHDTV(HighDenitionTelevision)isrequired.
SomeBDdiscsmayrequireusingtheplayer'sHDMIOUTtoviewhigh-denitioncontent.Theabilitytoview
highdenitioncontentonBDdiscsmaybelimiteddependingontheresolutionofyourTV.
qGraphicplanes
Twoindividual,fullHDresolution(1920x1080)videolayersareavailable,ontopoftheHDvideolayer.
Onelayerisassignedtovideo-relatedgraphics(likesubtitles),andtheotherlayerisassignedtointeractive
elements,suchasbuttonsormenus.Variouswipes,fadesandscrolleffectsmaybeavailableonbothlayers.
qMenu graphics
Supportfullcolorresolutiongraphicsandanimation,therebygreatlysurpassingthecapabilitiesofDVD-Video.
(Blu-raydisconly)
UnlikeDVD,Menuscanbeaccessedduringvideoplayback.
qMenu sounds
Product Specication
Whenyouhighlightorselectamenuoptiononadisc,soundscanbeheardsuchasbuttonclicksoravoice-
overexplainingthehighlightedmenuchoice.
qMulti-page/PopUpMenus
WithDVD-Video,playbackisinterruptedeachtimeanewmenuscreenisaccessed.DuetoBlu-rayDisc'sabil
itytopreloaddatafromthediscwithoutinterruptingplayback,amenumayconsistofseveralpages.
Youcanbrowsethroughthemenupagesorselectdifferentmenupaths,whiletheaudioandvideoremain
playinginthebackground.
qInteractivity
WiththeHDDVD,youcanenjoyvarioustypesofcontentshowingadditionalinformationincludinganima
tiononmenuoptionsandmovie,simultaneousplaybackofmainandsecondarymoviesusingPIP(Picture-in-
picture),anddownloadvariouscontentviathenetworkforyourentertainment.
qUserBrowsableSlideshows
WithBD/HDDVDDiscs,youcanbrowsethroughvariousstillpictureswhiletheaudioremainsplaying.
qSubtitles
DependingonwhatiscontainedontheBD/HDDVDDisc,youmaybeabletoselectdifferentfontstyles,sizes
andcolorsforthesubtitles,Subtitlesmayalsobeanimated,scrolledorfadedinandout.
qMulti-formatSystem
TheHDDVDtwin-formatdiscconsistsoftheHDDVDlayerandDVDlayeronthesingleside.
TheHDDVDcombidiscconsistsoftheHDDVDlayerandtheDVDlayeroneachofthedoublesides.
Theabovetwotypesofdiscarenewlyintroducedandmaynotbeoperatedintheplayer,dependingonthe
disc.
qInternetConnection(LANPort)
SomeHDDVDdiscsaredesignedtoaccessacertainHDDVDsite.
IfyourplayerisconnectedtotheInternetandsuchcontentasmovietrailerisprovidedinthatHDDVDsite,
youcanaccessthesiteandenjoythatcontentontheplayer.
2-1-4 Disc types that can be played
Disc Types Recorded content Disc Shape Max. Playing minute
BD-ROM AUDIO + VIDEO
HD DVD-ROM AUDIO + VIDEO
DVD-VIDEO
(Include mini type)
DVD-RW(V mode and nalized only) (Include mini type) AUDIO + VIDEO 5 inches (4.7GB) 480(EX : Extended Play)
DVD-R(V mode and nalized only) (Include mini type) AUDIO + VIDEO 5 inches (4.7GB) 480(EX : Extended Play)
AUDIO-CD AUDIO
AUDIO + VIDEO
Single sided(25GB)
Double sided(50GB)
Single sided(15GB)
Double sided(30GB)
Single sided(5 inches) 240
Double sided(5 inches) 480
Single sided(3 1/2 inches)
Double sided(3 1/2 inches) 160
Single sided(5 inches) 74
Single sided(3 1/2 inches)
Playing time depends on
the Title
-
80
20
Samsung Electronics 2-3
Product Specication
2-4 Samsung Electronics
BD-ROM
HD DVD
DVD-Video
AUDIO-CD
CD-R(V mode and
nalized only)
DVD-R(V mode
and nalized only)
DVD-RW (V mode
and nalized only)
Blu-ray Disc Read Only Memory. A BD-ROM disc contains pre-recorded data. Although a BD-ROM may contain any
form of data, most BD-ROM discs will contain movies in High Denition format, for playback on Blu-ray disc players.
This unit can play back pre-recorded commercial BD-ROM discs.
HD DVD or High-De nition DVD is a high-density optical disc format designed for the storage of
data and high-de nition video.
HD DVD has a sigle-layer capacity of 15GB and a dual-layer capacity of 30GB.
A digital versatile disc (DVD) can contain up to 135-minutes of images, 8 audio languages and 32
subtitle languages. It is equipped with MPEG-2 picture compression and Dolby Digital surround, allowing you to
enjoy vivid and clear theatre quality images.
When switching from the rst layer to the second layer of a dual-layered DVD Video disc, there may be momentary
distortion in the image and sound. This is not a malfunction of the unit. Once a DVD-RW/-R recorded in Video Mode
is nalized, it becomes DVD-Video. Pre-recorded (prestamped)
commercial DVDs with movies are also referred to as DVD-Videos. This unit can play back
pre-recorded commercial DVD discs (DVD-Video discs) with movies.
An audio disc on which 44.1kHz PCM Audio is recorded.
This unit can play back CD-DA format audio CD-R.
The unit may not be able to play some CD-R discs due to the condition of the recording.
Use a 700MB(80 minutes) CD-R disc. If possible, do not use a 800MB(90 minutes) or above disc, as the disc may
not play back.
If the CD-R disc was not recorded as a closed session, you may experience a delay in the early
playback time, all recorded les may not play.
Some CD-R discs may not be playable with this unit, depending on the device which was used to burn them. For
contents recorded on CD-R media from CDs for your personal use, playability may vary depending on contents and
discs.
Once a DVD-R recorded in Video Mode is nalized, it becomes DVD-Video.
This unit can play back DVD-R discs recorded and nalized with a Samsung DVD video recorder. It may not be able
to play some DVD-R discs depending on the disc and the condition of the recording.
Playback can be performed with DVD-RW discs in the Video Mode and nalized only.
Once a DVD-RW recorded in Video Mode is nalized, it becomes DVD-Video. Ability to play back may depend on
recording conditions
2-1-5 Discs that cannot be played
qBlu-rayDiscswitharegioncodeotherthan"RegionA".
qBD-R,BD-RE
qDVD-Videowitharegionnumberotherthan“1”or“ALL”
qHD DVD-R
qDVD-RAM
q3.9GBDVD-RDiscforAuthoring.
qDVD-RW(VRmode)
qDVD-ROM/PD/MV-Disc,etc
qCD-RW
qCVD/CD-ROM/CDV/CD-G/CD-I/LD
[Note]
qSomecommercialdiscsandHDDVD/DVDdiscspurchasedoutsideyourregionmaynotbeplayable
withthisproduct.Whenthesediscsareplayed,either“Nodisc.”or“Pleasechecktheregionalcode
ofthedisc.”willbedisplayed.
qIfaDVD-R/-RWdischasnotbeenrecordedproperlyinDVDvideoformat,itwillnotbeplayable.
TheunitcannotplayDVD-RW/-Rrecordedcontentsuchasdivx,avi,mpg,mov,wma,mp3,jpeg.
Product Specication
2-1-6 Region code
BoththeDuoHDplayerandthediscsarecodedbyregion.Theseregionalcodesmustmatchinorder
toplaythedisc.Ifthecodesdonotmatch,thediscwillnotplay.
TheRegionNumberforthisDuoHDplayerisdescribedontherearpaneloftheDuoHDplayer.
Disc Type Blu-ray DVD-Video
Region code
BD Region Code Area
A
B Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand.
C India, China, Russia, Central and South Asia.
North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong
and South East Asia.
2-1-7 Blu-ray Disc Compatibility
Blu-rayDiscisanewandevolvingformat.Accordingly,disccompatibilityissuesarepossible.Notalldiscs
arecompatibleandnoteverydiscwillplayback.Foradditionalinformation,refertotheComplianceand
CompatibilityNoticesectionofthisManual.Ifyouencountercompatibilityproblems,pleasecontactthe
SAMSUNGcustomercarecenter.ThisSamsungBlu-raydiscplayer(BD-UP5000)supportsonlytheBDROM
Prole1version1.0specication.Ifyouwanttoplaylaterversiondiscs,youmayneedtoupdate
player'srmware.Pleaserefertohttp://www.samsung.comorcontactSAMSUNGcustomercarecenterat
1-800SAMSUNG.
2-1-8 HD DVD Disc Compatibility
HDDVDisanewformat,disccompatibilityissueswithnewandexistingformatdiscsarepossible.
Notalldiscsarecompatible.Ifyouexperiencecompatibilityproblems,pleasecontactSAMSUNG
CustomerService.
Samsung Electronics 2-5
Product Specication
2-6 Samsung Electronics
2-2 Chassis Product Specication
General Features BD-P1200/XAA BD-P1400/XAA BD-UP5000/XAA
Chassis
CVBS Output 1CH 1CH 1CH
S-Video Output 1CH 1CH 1CH
Input /
Ouput
Audio/Video
Decoder
Loader
A/V Play-
able Media
YPbPr Output 1CH 1CH 1CH
HDMI O O O
Digital Audio Output(Optical/Coaxial) O/O O/O O/O
AOnalog Audio Output (2ch/5.1ch) 1/1 1/1 1/1(7.1ch)
HDMI CEC O O O
A/V Decoder BCM7438 SMP8634 BCM7440
Video DAC 10bit 10bit 10bit
Audio DAC 24bit 192kHz 24bit 192kHz 24bit 192kHz
BD-ROM O O O
BD-RE / BD-R O X X
DVD-RAM O X X
DVD-RW O O O
DVD-ROM O O O
DVD-R O O O
DVD+R X X X
DVD+RW X X X
CD-ROM O O O
CD-R O O O
CD-RW O O X
HD DVD-ROM X X O
BD-ROM O O O
BD-RE / BD-R O X X
DVD-Video O O O
DVD-Audio X X X
DVD-VR O X X
HD DVD-ROM X X O
Not nalized DVD-V Mode X X X
VCD 1.1/2.0
SVCD/CVD X X X
CD-DA O O O
DTS CD O O O
HDCD X X X
SACD X X X
SACD CD Layer O O O
Picture CD O O O
DiVX X X X
X X X
Product Specication
General Features BD-P1200/XAA BD-P1400/XAA BD-UP5000/XAA
Chassis
Front Display VFD VFD VFD
Miscellane-
ous
Screen capture X X X
Closed Caption pass through from disc O O O
Main Menu (including Setup Menu) O O O
Samsung Electronics 2-7
Product Specication
2-3 Option Product Specication
Description Fig Description Parts No Remark
Remote Control AK59-00075A
Batteries for Remote Control 4301-001035
Instruction Manual AK68-01477A
Quick Guide AK68-01480A
Model Standard of
BD-UP5000/XAA
Model Standard of
BD-UP5000/XAA
S.N.A
Model Standard of
BD-UP5000/XAA
Model Standard of
BD-UP5000/XAA
S.N.A
Component Cable MF39-00274A
Model Standard of
BD-UP5000/XAA
2-8 Samsung Electronics
3. Disassembly and Reassembly
3-1 Cabinet and PCB
CAUTION : Connector Must be remove with care
3-1-1 Top Cabinet Removal
1) Remove 5 Screws q, w.
2) Lift up the Top Cabinet e in direction of arrow.
q 3 SCREWS
(3X10 B)
Fig. 3-1 Top Cabinet Removal
e TOP CABINET
w 2 SCREWS
(3X8 B)
Samsung Electronics 3-1
Disassembly and Reassembly
3-2 Samsung Electronics
3-1-2 Ass’y Front-Cabinet Removal
1) Release 7 Hooks q, w, e, r and Ass’y Front-Cabinet t.
q 1 HOOK
r 2 HOOKS
e 3 HOOKS
w 1 HOOK
t ASS’Y FRONT-CABINET
Fig. 3-2 Ass’y Front-Cabinet Removal
3-1-3 Ass’y Deck Removal
1) Remove 4 Screws q from the Ass’y Deck w and lift it up.
q 4 SCREWS
(3X10 W)
Disassembly and Reassembly
w ASS’Y DECK
Fig. 3-3 Ass’y Deck Removal
Samsung Electronics 3-3
Disassembly and Reassembly
3-4 Samsung Electronics
3-1-4 S.M.P.S PCB Removal
1) Remove 4 Screws q, from the S.M.P.S PCB w and lift it up.
q 4 SCREWS
(3X8 W)
w S.M.P.S PCB
Fig. 3-4 S.M.P.S PCB Removal
3-1-5 Main PCB Removal
1) Remove 10 Screws q, w, efrom the Main PCB r and lift it up.
q 4 SCREWS
(3X6 W)
Disassembly and Reassembly
r MAIN PCB
w 1 SCREW
(3X6 B)
e 5 SCREWS
(3X10 B)
Fig. 3-5 Main PCB Removal
Samsung Electronics 3-5
Disassembly and Reassembly
3-6 Samsung Electronics
3-1-6 FAN Removal
1) Remove 2 Screws q from the Fan w and lift it up.
q 2 SCREWS
(5X14 S)
w FAN
Fig. 3-6 FAN Removal
3-2 PCB Location
Disassembly and Reassembly
MAIN PCB
S.M.P.S PCB
Fig. 3-7 PCB Location
Samsung Electronics 3-7
Disassembly and Reassembly
M E M O
3-8 Samsung Electronics
4. Trouble Shooting
4-1 Trouble Shooting -------------------------------------------------------------------------------- 4-2
4-2 Software Update ------------------------------------------------------------------------------- 4-24
4-3 Firmware Upgrade ---------------------------------------------------------------------------- 4-26
Samsung Electronics 4-1
Trouble Shooting
4-2 Samsung Electronics
4-1 Trouble Shooting
NO Power Detected (Stand by LED OFF)
F1S01 is normal?
Yes
Q1S11
voltage
is normal voltage?
Yes
Switching
operation
of IC1S11 is normal?
Yes
Change the SMPS PCB
No
Refer to a pattern
image of Table 4-1
No
Refer to a pattern
image of Table 4-1
No
Refer to a pattern
image of Table 4-1
Change fuse
Change BD1
Refer to a pattern
image of Table 4-1
Change IC1S11
q Q1S11
Trouble Shooting
Refer to a pattern
image of S.M.P.S PCB page 6-7
This must be between 150V and 160V
VCC of IC1S11 must be under 26V
This must be a short
Refer to a pattern
image of S.M.P.S Page 7-5
Fig. 4-1
Samsung Electronics 4-3
Trouble Shooting
4-4 Samsung Electronics
There’s no Digital Audio Out
Check
Current Digital Audio
Setting is PCM.
Yes
Check the
Audio Data at AIC1
(Pin 13)
Yes
Check
Digital Audio Data
at AIC 1 (Pin 2,4,6)
Yes
Digital Audio cable error
No
No
Refer to a pattern
image of Table 4-2
No
Refer to a pattern
image of Table 4-2
Check
the A/V Receiver can
Decode Current
Bit-Steam
Yes
Replace the Main PCB
Check AIC1 soldering or
replace AIC1
No
Set to Bitstream
Trouble Shooting
q DIGITAL AUDIO DATA
AIC1 (Pin2,4,6,13)
Refer to a pattern
image of Main PCB page 6-6
Refer to a pattern
image of Audio (Main PCB) Page 7-6
Fig. 4-2
Samsung Electronics 4-5
Trouble Shooting
4-6 Samsung Electronics
There is no Audio output
(multichannel)
Check
the Audio
signal at PIN 13,14,15,16
of AIC2
Yes
Check
the Audio
signal at pin1,2,37~48 of
AIC2
Yes
Check
the Audio
signal at AIC4,5,6,7
Yes
Audio cable error
No
No
No
Refer to a pattern
image of Table 4-3
Replace the main PCB
Check AIC2 soldering or replace
AIC2
Check AIC4~7 soldering of
peripheral devices
Loading...